Master data HR to E-REC standalone system not being created using PFAL

I am trying to transfer data from HR to standalone E-REC system using PFAL transcation.
IDOC transferred with Status 53.
BADIS of E-rec are Implemented.
In e-rec relationship O to S, S to CP, CP to US, CP to BP and CP to P are getting created Properly in table HRP1001.
We are unable to see the data for Infotypes 0000,0001,0002,0006,0105 for the same CP in PP01.
We tried the same scenario with SRM system and there we were able to see the data of above infotypes for a CP.
Table T77S0 are maintained according to the SAP notes.
Please through some light on how we can transfer the data of HR master to E-rec and where exactly we have to check for this master data in E-REC
Thanks in Advance.

Dear Rohit,
Firstly,
No, you cannot have infotypes like how you have mentioned for SRM. This is not how it is in eRecruiting. As Raj suggested, we look at other infotypes of this.
5102 : gives you details about the candidates.Object NA.
5105: Qualification details etc.
For an object P in the system, there is CP. On activating the relevant BADIs, a BP & NA are created for the CP when transferring data from core HR. Now, this does not necessarily mean that all the HR infotypes are transferred to relvant infotypes in eRecruiting. The data is handled differently.
If you are sure that NA exists, then internal candidates are created successfully. Next thing would be to map this NA object with the relevant PA details like name, address,email address etc. For this we make use of the BP object associated with the CP & not the CP or the NA.
So, if you would want to check if the transfer is successful then you go to tcode BP & check if the name & address details etc are the same as the corresponding P for which the NA is created.
To see more of the core HR info, you can check the business partner BUT000 against the relevant BP.
I hope this clears some of your confusion.
Secondly,
Regarding the BADI, I am aware that this BADi is mainly required in an integration implementation scenario. But i think the sample implementation of this BADI CONV_HR_DATA_TO_EREC is required to create internal candidates from idocs.I think this is required for the P to CPBPNA transformation.But if you say the NA is created without this then maybe i am wrong. Please take a second look at this.
Regards,
Sowmya

Similar Messages

How to load master data and hierarchies from R/3 systems

HI all,
how to load master data and hierarchies from R/3 systems.
Please explain the steps.
Thanks,
cheta.

HI,
Its normally done following: Transferring the master datasources in RSA5 to RSA6 and then replicating the DS into BW and assignment of DS to Infosource and cretaion of Infopackage and load it into the master tables.
Generally, the control parameters for data transfer from a source system are maintained in extractor
customizing. In extractor customizing, you can access the corresponding source system in the source
system tree of the SAP BW Administrator Workbench by using the context menu.
To display or change the settings for data transfer at source system level, choose Business
Information Warehouse → General Settings → Maintaining Control Parameters for Data Transfer.
Note: The values for the data transfer are not hard limitations. It depends on the DataSource if these
limits can be followed.
In the SAP BW Scheduler, you can determine the control parameters for data transfer for individual
DataSources. You can determine the size of the data packet, the number of parallel processes for
data transfer and the frequency with which the status IDocs are sent, for every possible update
method for a DataSource.
To do so, choose Scheduler → DataSource → Default Settings for Data transfer.
In this way you can, for example, update transaction data in larger data packets in the PSA. If you
want to update master data in dialog mode, smaller packets ensure faster processing.
Hope this info helps.
Thanks,Ramoji.

In the attached VI I dont understand why data from the inner case structures are not being transmitted to the array.

In the attached VI I don't understand why data from the inner case structures are not being transmitted to the array.
Thank you.
Solved!
Go to Solution.
Attachments:
TEMP.vi ‏25 KB

It took me some time to figure what you are trying to do but I think I have it now.
The SR is still required.
What is happening is your "Bundle By Name" is replacing all of the fields of the cluster, not just the value coming out of the case structure. So to maintain the cluster stuff you do in earlier iterations you can either...
1) Put the "Index array, Bundle by name, and Replace array" inside the case structure and ONLY bundle the value you are setting in that iteration. (as you will see Tim post shortly)
OR
2) Move the Index array before the Case, unbundle all of the fields and feed teh case structure and run them across the case so that ALL of your output tunnels come from the coresponding input tunnel EXCEPT for the filed you are trying to set.
Ben
Message Edited by Ben on 05-05-2010 01:31 PM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Error: Data element for InfoObject AUFNR 0PM_ORDER could not be created(QA)

Hi Experts,
I am trying to Transport a request from DEV to QA,which consists Transaction Infosources, afetr the inport the TR is failed with return code 8. and the error message in the log is as follows.....
Error when determining a number from object BI_TSDTEL and number 01
Object name can only contain characters from syntactical character set
Data element for InfoObject AUFNR 0PM_ORDER could not be created
Data element for InfoObject KOKRS 0CO_AREA could not be created
Data element for InfoObject KOKRS 0CO_AREA could not be created
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
Data element for InfoObject TXTMD could not be created
Errors occurred during post-handling RS_AFTER_IMPORT for IOBJ L
please Could anyone give the Inputs to solve this , I'll be greatful to you.
Thanks & regards
SK

hello AJ,
Till now the problem is not solved , Please provide some inputs.
here I'm getting this problem for TXTMD, 0CO_AREA, 0PM_ORDER, 0DATE, 0PLANT, 0ORDER_CURR, 0LOC_CURRCY
Error when determining a number from object BI_TSDTEL and number 01
Object name can only contain characters from syntactical character set
Object name can only contain characters from syntactical character set
Data element for InfoObject KOKRS 0CO_AREA could not be created
Data element for InfoObject KOKRS 0CO_AREA could not be created
Transfer structure 0CO_OM_NTW_1_SB activated under the name 0CO_OM_NTW_1_SA
It is not necessary to copy dependent objects for transfer structure 0CO_OM_NTW_1_SA
Data element for InfoObject KOKRS 0CO_AREA could not be created
Activating Transfer Rules 0CO_OM_NTW_1_SA ...
23 Transfer Rule(s) of the transfer structure 0CO_OM_NTW_1_SA removed from control table
23 InfoObject(s) of the transfer structure 0CO_OM_NTW_1_SA removed from control table
Formulas have been saved
PLEASE PROVIDE SOME INPUTS.........
Message was edited by:
S K

How To Transfer the master data from R/3 to APO System

hi this is mohamed .i m new to APO..
can any one guide me the configuration for transferring the master datas to APO system.i m using scm 4.0 version..
Thanks in advance
Regards
Mohamed.

Welcome to SDN.
refer this link
creating integration model
Give ur mail id i will send the document which i have.
With regards.
Maya.

Master Data synchronisation between two Solution Manager systems

Hi all,
does anyone know if it is possible to synchronise master data (smsy, ibase and such) between two Solution Manager systems with standard jobs?
Thanks!
Regards

I asked a likewise question on the OSS earlier and I was told
"Use MDM" (which is a separate product and must be licensed separately).
Markus

Master data conflict when merging 2 BW systems

Hello All,
We are currently merging 2 BW systems (one existing system and creating the objects of the other system in the new system) which are fed from 2 different source R3 systems. We have conflicts in master data number ranges between the 2 R3 systems. We explored the option of compounding , however in this case we need to delete the existing data in the BW system which is not plausible.
Have any of dealt with such a situation, if so please advise on the solution.Thanks in advance.
Regards,
Ashwin G

Hi KK,
We thought of that, but doing tht would result confusion to the end user as the material number would look different.
Thanks and regards,
Ashwin G

Master data governance - Replicate to the same system/client?

Hi Experts,
We're evaluating MDG for supplier in our ECC6 EHP5 system. All the documentation I can find talk only about replicating to connected systems using ALE or SOA, but we've only one ECC6 environment and we're running MDG on the same server. Can someone please kindly let me know whether we can replicate the suppliers to the same ECC6 system that MDG is running on? And if yes, how?
Thanks very much for your help
Luis

Hi Luis
There are prebuilt workflows for MDG Supplier. You can use them directly for storing data in your ECC system. After the approval process is completed, MDG for supplier stores data in BUT000, LFA1, LFB1 and LFM1 tables in your ECC system. You can use the prebuilt workflows and UI, to get your job done. Once the approval process is done, data is stored in your system, then you can replicate to other systems
the below link maybe helpful
http://help.sap.com/erp2005_ehp_05/helpdata/EN/70/47f6938f70420f801be80a0df9fc30/frameset.htm
Regards
Goutham Kanithi

Master Data in IO as InfoProvider and as Not InfoProvider

Hi all
I found that I can directly input Master Data into InfoObject (IO) with Maintain Master Data menu. Before I thought, I have to insert an IO into InfoProvider to do ETL stuff.
Then what is the different between having this IO inside InfoProvider and not having it inside InfoProvider?
Thanks
ps. If this question is quite confusing, please let me know.
Regards,
Halomoan

Main difference of having and not having a MD InfoObject in the InfoProvider is for example
you have
Customer Master data which has a attribute called Location
Customer         Location             Year
ABC                USA                   2007
ABC                France                2008
From the above example if the Master Data is not time depenedent then we would have only one value for Customer Location as France and the User would like to see the location for Customer ABC in 2007 as USA and since the MD for Customer contains only the latest information France the history is lost so at the time of designing the Cube we look at these scenarios to decide which InfoObjects we would include in the Cube to avoid these situations. (Slowly changing dimensions).
Lets say that we included Location in the Cube. Now the users will have the flexibility to report the current location for all the years using the MD attribute or can use the location InfoObject from the InfoCube to get the snapshot of 2007 as well. Below is the result from these 2 scenarios
1.Scenario 1 Using Customer MD to get Location information
Customer           Location        Year            Amt
ABC                  France           2007           1000
ABC                  France           2008            500
2. Scenario 2 using the Location information stored in Cube
Customer          Location          Year           Amt
ABC                 USA                2007          1000
ABC                 France             2008           500
Also there would be some performance improvement if you are using the InfoObejct from the Cube as you are reducing a join.
Hope this is helpful.

Master-detail page with form layout -- insert only -- not in create mode

JDeveloper 10.1.3.1 with JHeadstart
I have the following master-detail structure in JHeadstart:
Group 1, Table a, Layout: table-form
Group 2, Table b, Layout: table-form
Group 3, Table c, Layout: form
Group 4, Table d, Layout: form (on same page as master table c)
Table a, b and c are updatable (insert, update and delete).
I have problems with the last page, tables c and d, master-datail both in form layout.
The master-table (c) is not an insert-only table, the detail table needs to be an insert-only form on the same page as the master table c.
Settings Table d:
Advanced search and quick search: none
Autoquery: disabled
Single row insert allowed (other options in Operations disabled)
In my view object I have used the settings in the JDeveloper guide 8.1.2 ('no rows...' in tab Tuning).
I run my application in JDeveloper (with the option run in my ViewController-project, which means that I am not running my detail page directly in JDeveloper??) and when I open this last page, the detail form is not in create mode (I see no rows found and a create rows button).
I have read several threads in this forum, but I do not know how to solve this problem.

This does not work.
In my first post I made an mistake in describing my application, it is not a table-form, but a tree-form application:
Group 1, Table a, Layout: tree-form
Group 2, Table b, Layout: tree-form
Group 3, Table c, Layout: tree-form
Group 4, Table d, Layout: form (on same page as master table c)
If I override the executeQueryForCollection method in the ViewObjectImpl of table d I get a message ('JBO-27122: SQL-fout tijdens voorbereiding van statement' and 'java.sql.SQLException: OALL8 is in an inconsistent state').
while clicking on the tree (with table b and c). It seems that the QueryForCollection method is being executed to early.

Windows Operating System not being monitored

I have installed some of the management packs (advanced workflow module events, event log provider events, performance monitor porvider events, registry provider events, script and powershell provider events, service monitoring events, vmi provider events) and
there are no overrides. I still cannot get the windows operating system to get monitored. I have restarted the server and still none of the windows operating systems are being monitored. Is there a certian management pack that i need to install
for the monitoring Windows Operating Systems.

dktoa is correct, just because you have the Agents installed does not mean that anything is actually being monitored. In fact, all that will be monitored is the Agent itself being able to communicate with the Management Server.
However, I would suggest to ensure that all of your Agents are reporting back as Healthy (aka green), before you import any Management Packs. That way any issues that may occur can be directly linked (and thus troubleshooted) to the MP.
Additionally, you have not mentioned what Windows OS you are trying to monitor. More than likely it is a Server OS; in which DKTOA has provided the link for the Windows Server Operating System Management Pack.
However, if in case it is a client-based Windows OS (i.e. XP, Vista, 7) than that Management Pack can be found here: http://www.microsoft.com/en-us/download/details.aspx?id=15700.
You should note, that there currently is no Management Pack for Windows 8; though it is due out soon.

The master data table of char. 0LOGSYS is not generated

Hi,
When I checking Infosource 0ORGUNIT i can see that the transfer rules of 0LOGSYS is not available, what can I do? I need It to consolidated the information in my Corporative BW System.
Mariely

Hi Mariely,
if your std datasource doesn't provide an R/3 field that the system can use when it creates a transfer rules proposal, you can enhnace it by appending in R/3 datasource an additional field that you have to fill with R/3 logical system name and pass this custom field in your transfer rule for 0LOGSYS infobject...
go in rsa6 and for 0ORGUNIT_ATTR enhance his structure...
let me know where (in this procedure) you need more info...
Bye,
Roberto

SAP System Profile directory not being created on windows

I am not SAP Basis person , but am trying to Install SAP Solution Manager 7.0 , IDES ECC 6.0 and SAP PI 7.1 as sandboxes.
{Windows 2003 / Oracle 10}
I am using ORACLE RDBMS 10.2 and its PATCH 10.2.0.4. On trying to install Dialog Instance ( Softeare Life cycle Options > Application Server > Oracle > Dialog Instance, It asks for the profile directory as its seeking the file "default.pfl"
It suggests that its path as
<SAPGLOBAHOST>\sapmnt\<SAPSID>\SYS\profile
However default.pfl file exists no where on my computer , and more imortantly the shared folder sapmnt does not even exist on my system.
Can you please tell me what I am doing wrong Am I doing a wrong installation right at the RDBMS instalation stage ? I also tried to install ECC 6.0 as it seemed to have the same RDBMS base files . However in ECC 6.0 installation I encounted the same issue.
Thanks in advance
rishi

Hi,
First thing is that you have to go through the master guide and the installation guide to understand the systems in SAP before starting the installation.
The issue here is that you have no idea of a dialog instance and trying to install that without a central instance in place.
I would suggest you to go through the master and installation guides and understand the different systems and fulfil all the recommended prerequisites and then start installing the SAP systems.
Regards,
Varadharajan M

System not allowing to use park workflow only for GL

Hi Gurus,
We have created workflow variant and selected release posting and release payment.
We want to use workflow only for GL document but when we are parking vendor invoice in fv60, system is not allowing to post parked vendor invoice and saying not released.
We want one user to park and post vendor invoice. Right now we are not able to.
Please help.
Thank you

Hi Mohit,
Post can be possible to next authorized level. Check settings or else go to FBV3 ,enter document number ,company code and year > Enter > where you can see the workflow tab > Click on that where you came to know how may release levels are assigned.
In same view > Click on system in menu bar > services for object > Click on workflow icon > where you came to know who is the next approver.
Regards
Mani

Deployment - setting for system not to create planned orders.

hi
I am executing deployment at the plant level.
i have req. of 8000 on 26th and 9000 on 27th.
i created a stock of 3000 on 25th.
i am executing push deployment and maintained setting accordingly.
After completion of deployment, system deploys the stock ie 3000 and creates Planned order for the remaining 5000 to meet the demand of 8000.
What setting has to be maintained such that system only deploys 3000 or the stock only and does not create a planned order for the unful filled demand. ???
in onther words system should deploy the stock and should not do anything more than that.
Thanks.

Hi Aswath,
Can you answer these few questions for me? I will be able to answer your more appropriately.
What is the order of planning runs in your system?
1. DPR for demand at DC that creates distribution demand at the plant
2. Deployment of the current stock at the plant
3. Planning run at the plant to create planned order for any demand left out
Is that the order? This does not make good sense for me but I don't know your scenario.
What kind of deployment run are you suing? deployment heuristics or optimizer?
In both the cases, you have "delete" and "reduce" option.
The system deploys the stock at the DC based on the distribution demand ( coming from DC to Plant).
If you use delete option, the system deploys for the amount of stock it has and deletes the remaining distribution demand.
So, if you got distribution demand of 100 PCs, there is only 50 PCs stock at plant, the plant deploys 50 and deletes the other 50 PCs distribution demand at the plant. You need to rerun DRP at DC if you want to get back this demand.
If you use reduce option, the system deploys for the amount of stock it has and reduces the remaining distribution demand.
So, if you got distribution demand of 100 PCs, there is only 50 PCs stock at plant, the plant deploys 50 and reduces the distribution demand at the plant to 50 PCs.
I think you have the second case and you are running planning run at the plant and it's creating orders. If you don't want the system to create them, use the "delete" option in deployment run.
Please let me know if I am getting your point right.

Master data HR to E-REC standalone system not being created using PFAL

Similar Messages

Maybe you are looking for