Master data loading of contract information

Dear all,
i have the reporting requirement,which i mentioned below,
Product Description Product Family NDC Material Number Contract Type
Contract Name Contract Number Contract Price
Rebate % Rebate / Unit Rebate % (Adm)Rebate / Unit (Admin) Net Price (w/o Admin)
Net Price (w Admin) Net Sales Units
the information whcih i retriving from vistex application ,
i have the vistex extractor by using this i have to retrieve in BI layer(psa)
and master data information(Product no,Product descrip,material name and NDC) is already in BI side which is loading from ECC side,
and hence i came to know for Vistex application there is no standard content delivered in SAP,
so everything i need to cuustomize in BI landscape from datasource level to Data target level.
the rest of the fields contract type,Contract Name Contract Number and Contract Price
anyone guide me
how to load the data for master data information?
and how to design attribute and text to the master data in onfoobje level and data target level
and how to design the keyfields for DSO and Dimension for Cube by using this fields?
Best regards
Edited by: gadhatharan thirunavukkarasu on Oct 17, 2011 12:26 PM
Edited by: gadhatharan thirunavukkarasu on Oct 17, 2011 12:29 PM

Hi,
Product descrip ,product familyis there in BI already interms of  material description and material group and its getting the data from ECC every interval,
i need to crate master only contract information,
like contrcat name,contract type and contract number
plz give the idea about whcih key combination i need to create the contract master
since material master data already loading into master data data target,ur saying keep the key fields(material) in DSo
why we need to load master data information into DSO? as u replied .
for material information in DSO key fields we can keeep 0material it ll be fulfill for rest of master data .if its so,
what is the unique field for contract information to keep as 0material? in DSO
am expecting with ur valuable reply
Edited by: gadhatharan thirunavukkarasu on Oct 17, 2011 2:33 PM

Similar Messages

  • Problem with Master Data Load

    Dear Experts,
    If somebody can help me by the following case, please give me some solution. Iu2019m working in a project BI 7.0 were needed to delete master data for an InfoObject material. The way that I took for this was through tcode u201CS14u201D. After that, I have tried to load again the master data, but the process was broken and the load done to half data.
    This it is the error:
    Second attempt to write record 'YY99993' to /BIC/PYYYY00006 failed
    Message no. RSDMD218
    Diagnosis
    During the master data update, the master data tables are read to determine which records of the data package that was passed have to be inserted, updated, or modified. Some records are inserted in the master data table by a concurrently running request between reading the tables at the start of package processing and the actual record insertion at the end of package processing.
    The master data update tries to overwrite the records inserted by the concurrently running process, but the database record modification returns an unexpected error.
    Procedure
    u2022     Check if the values of the master data record with the key specified in this message are updated correctly.
    u2022     Run the RSRV master data test "Time Overlaps of Load Requests" and enter the current request to analyze which requests are running concurrently and may have affected the master data update process.
    u2022     Re-schedule the master data load process to avoid such situations in future.
    u2022     Read SAP note 668466 to get more information about master data update scheduling.
    Other hand, the SID table in the master data product is empty.
    Thanks for you well!
    Luis

    Dear Daya,
    Thank for your help, but I was applied your suggesting. I sent to OSS with the following details:
    We are on BI 7.0 (system ID DXX)
    While loading Master Data for infoobject XXXX00001 (main characteristic in our system u2013 like material) we are facing the following error:
    Yellow warning u201CSecond attempt to write record u20182.347.263u2019 to BIC/ XXXX00001 was successfulu201D
    We are loading the Master data from data source ZD_BW_XXXXXXX (from APO system) through the DTP ZD_BW_XXXXX / XXX130 -> XXXX00001
    The Master Data tables (S, P, X) are not updated properly.
    The following reparing actions have been taken so far:
    1.     Delete all related transactional and master data, by checking all relation (tcode SLG1 à RSDMD, MD_DEL)
    2.     Follow instructions from OSS 632931 (tcode RSRV)
    3.     Run report RSDMD_CHECKPRG_ALL from tcode SE38 (using both check and repair options).
    After deleting all data, the previous tests were ok, but once we load new master data, the same problem appears again, and the report RSDMD_CHECKPRG_ALL gives the following error.
    u201CCharacteristic XXXX00001: error fund during this test.u201D
    The RSRV check for u201CCompare sizes of P and X and/or Q and Y tables for characteristic XXXX00001u201D is shown below:
    Characteristic XXXX00001: Table /BIC/ PXXXX00001, /BIC/ XXXXX00001 are not consistent 351.196 derivation.
    It seems that our problem is described in OSS 1143433 (SP13), even if we already are in SP16.
    Could somebody please help us, and let us know how to solve the problem?
    Thank for all,
    Luis

  • Master data load gives dump with exception CX_RSR_X_MESSAGE

    Hi all,
    I scheduled master data load for 0MATERIAL in our BI 7.0 Quality server. The load ended in dump with the exception CX_RSR_X_MESSAGE. The data has loaded into PSA( 37257 from 37257 records) but the technical status is red and has not updated the master data object.
    I have seen note 615389 which talks about number range but the check is successful. The data load was successful in development server. This error has occured only in Quality.
    We are on SP 12 in BI 7.0.
    We are moving to production soon, so this is an urgent issue. I would appreciate if anyone responds soon. Points will be rewarded.
    with regards,
    Ashish

    Hi,
    The log of the dump is given below.
    Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
    and
    therefore caused a runtime error.
    The reason for the exception is:
    No text available for this exception
    Information on where terminated
    Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 78
    of the (Include) program "LRRMSU13".
    Source Code Extract
    Line
    SourceCde
    48
    *... Nachricht an den Message-Handler schicken
    49
    50
    *... S-Meldung wenn kein Handler initialisiert
    51
    DATA: l_type  TYPE smesg-msgty,
    52
    l_zeile TYPE rrx_mesg-zeile.
    53
    CALL FUNCTION 'MESSAGES_ACTIVE'
    54
    IMPORTING
    55
    zeile      = l_zeile
    56
    EXCEPTIONS
    57
    not_active = 1.
    58
    IF sy-subrc NE 0.
    59
    l_type = 'S'.
    60
    ELSE.
    61
    l_type = 'W'.
    62
    ENDIF.
    63
    64
    CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
    65
    EXPORTING
    66
    i_class  = 'BRAIN'
    67
    i_type   = l_type
    68
    i_number = '299'
    69
    i_msgv1  = i_program
    70
    i_msgv2  = i_text.
    71
    ELSE.
    72
    DATA: l_text  TYPE string,
    73
    l_repid TYPE syrepid.
    74
    75
    l_repid = i_program.
    76
    l_text  = i_text.
    77
    >>>>>
    RAISE EXCEPTION TYPE cx_rsr_x_message
    79
    EXPORTING text = l_text
    80
    program = l_repid.
    81
    ENDIF.
    82
    83
    ENDFUNCTION.
    I went to SM21 and went through the system log.  There was a log with the following text  ORA-20000: Insufficient privileges#ORA-06512: at
    "SYS.DBMS_STATS", line 2150#ORA-06512: at "SYS.DBMS_STATS.
    I found a note 963760 for this error. After the changes said in this note were done I reloaded the data and it worked fine. Data load for another data source which gave dump now worked.
    I am not sure if the note did the trick. So i am keeping this post open in case someone finds another solution or can confirm the solution which worked for me.
    Thanks Oliver and Oscar, for replying.
    regards,
    Ashish

  • BI Statistics Master Data Load

    Hi,
    We are implementing BI Statistics and BI Administration Cockpit.  One of the OSS Note 934848 mentions that I have to install/activate all the datasources that are under the Application Component BW_TECH --> TCT.
    My question is do I have to consider loading the master data for all those datasources/infoobjects ?  There are nearly 80 - 100 datasources.
    The note 934848 mentions to install the Business Content Process Chains.  And I see that those process chains are hardly loading 10 - 12 master data loads.  Is it OK if I just make use of those business content process chains to load master data ?
    Initially I have created DTP's and Transformations to load master data for approx 50 objects.  Later I came to know that BI statistics Cubes etc follow the 3.x format and I should use those as it is delivered.  So, can't I still make use of the 7.0 converted datasourse objects with DTP to load the data ?
    -or- do I have to delete all the transformations and DTP's and migrate all those DataSources back to 3.x ?
    Thanks,

    Hi Sesh,
    1. Yes you need to activate all those Datasources. Its better to activate all of them as in BI 7.0 TCT infoproviders are used as basis for Workload monitor ST03 also in addition to Admin cockpit.
    2. Its sufficient to just load the master data using the standard process chains (Init chains once followed by delta chains.
    3. Its recommended to use the TCT content as 3.x only.
    4. No need to migrate the 3.x content, just use as it is.
    for more information you can refer to this <a href="https://forums.sdn.sap.com/thread.jspa?threadID=279998&tstart=0">thread</a> and related posts by <a href="https://forums.sdn.sap.com/profile.jspa?userID=2035002&start=0">Rajani Saralaya K</a>
    Assign points if helpful,
    Regards, Uday

  • Master Data Loading for Prices and Conditions in CRM - "/SAPCND/GCM"

    Hi,
    Could anyone give me some inputs on Master Data Loading for Prices and Conditions in CRM.
    T. Code is:  /SAPCND/GCM
    I need to load data on a file (extracted from 4.6) for service contracts.
    I tried LSMW : for this transaction, recording does not work.
    I am trying loading thru Idocs (LSMW). But that too is note really working.
    Do we require some custom development for this , or is some SAP standard funcntionality available ??
    Can anyone provide some valuable inputs one this.
    Would appreciate your responses.

    Hi Tiest,
    Thanx for responding.
    U r right, our clint is upgrading from 4.6 to ECC.
    So as per the clients requirements, we are maintaining all the configs for Services in CRM.
    Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
    What I am looking os some standard upload program.
    LSMW recording does not work.
    This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
    IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
    But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
    Till now, I am only able to define just one field name and a field value.
    I want this to word for mutliple entries.
    Hope u get my point.
    Thanx

  • Master data Load for Substance Creation :  Using BAPI in LSMW  ?

    Hi ,
    Had any one did a Master data load for creating a Substance in SAP RM. If so please let me know the best possible option. I am beeing trying to figure out the option to load Substances and its IDENTIFIER / MATERIAL ASSINGMNET from my legacy system. But I am not geeting a clue to use LSMW. ( Direct or BatchInput )
    I am not seeing any BAPI for uploading it through the LSMW except the one BUS1077 ( method SAVEREPMUL ) and I guess this is used along with IDOC.
    Appreciate your help and suggestion.
    David

    Thanks John.
    I will try this option what you have suggested. Even I told by business team to look for CG33. But they were been telling me some format issue. Probably they would meant the same what you have said. But they were not aware of work around for this. your information is intresting.
    The other option given to me was to create a recording for each and every Tab like Substance header / Identifier / Material assignment etc. seperately. Technically I don't feel good to create in that way. Do you think that is alernate approach.?
    With Respect & Regards
    David

  • Error is Master Data load.

    Hi Experts,
    From last 1 month the ( 0MAT_UNIT ) master data load is getting failed. Its a full load. So the the target is not updated from last one month( August)
    Now the problem is , when I am checking a report. The materials which are new or changed are not getting the data properly. It is because of the master data got stucked at PSA level.And I cant rectify at PSA level because, There is 673 errorneous record in 1 package.
    I tried to find the invalid character , but didn't get anything.
    Please suggest.
    Thanks,
    TapuKumar

    Hi Anand,
            This is the long text msg
    Data records in the PSA were marked for data package 1 . Here there were
    673 errors. The system wrote information or warnings for the remaining 
    data records.
                                                                                    System response                                                                               
    The data package was not updated.                                                                               
    Procedure                                                                               
    Correct the incorrect data records of the data package (for example by   
         manually editing them in the PSA maintenance). You can find the error    
         message for each of the records in the PSA by double-clicking on the     
         status of the record.                                                                               
    Note                                                                               
    Note that you are only allowed to edit and manually update the request   
         if it is contained in the request list in the data target. Where         
         necessary, first delete it from the data target.                         
    And it is a master data load( Full ), The data target is a INFO OBJECT.
    Please suggest, I can't rectify each and every reecord. Because the number of record id very high..
    Thanks,
    Tapu Kumar.
    Edited by: NewToBW on Sep 2, 2010 1:42 PM

  • Master Data loading got failed: error "Update mode R is not supported by th

    Hello Experts,
    I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
    For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
    "Update mode R is not supported by the extraction API"
    Can anyone tell me what is that error for? how to resolve this issue?
    Regards,
    Nirav

    Hi
    Update mode R error will come in the below case
    You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
    This time the load will fail with update mode R.
    As repeat delta is not supported.
    So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
    example your fiorst delta failed with replication issue.
    only replicating and repeaing will not solve the update mode R.
    you will have to do both replication of the data source and re-int for the update mode R.
    One more thing I would like to add is.
    If the the delat which failed with error the first time(not update mode R), then
    you have to do init with data transfer
    if it failed without picking any records,
    then do init without data transfer.
    Hope this helps
    Regards
    Shilpa
    Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM

  • Error in Setting lock for Master Data Load

    Hi Team,
    I encounter the following error while uploading the Masterdata
    "Lock NOT set for: Loading master data attributes
    Attributes of characteristic 0BPARTNER are locked by terminated change run 465451241"
    I Performed the following steps
    1) Checked if any active jobs (change run jobs) running in the system. But no jobs running.
    2) RSATTR->infoobject list-> no infoobject found
    3)Tried after sometime ,but load continue to fail
    Could anyone help to solve the problem
    thanks
    Bala

    Hi Bala,
    Check in SM12 if there are any locks exist with the change run number?
    First check if there are any Master data loads running related to it?
    Check in the Attribute change run screen if there are any change run steps are running?
    Once after checking the above if no locks exist and no master data is running then check the below steps
    1. Run RSA1 transaction
    2. Tools -> Apply Hierarchy/Attibutes Change(or direct transaction RSATTR)... menu option
    3. Click at "Monitor and Start terminated Change Runs" button (at the bottom of the screen)
    4. Click "Reset Status" button at Run ID 465451241
    NOTE: this is not recommended, to unlock the locks better to wait till the locks get relased.
    If still the error message persists then we can use a FM in se37 in serious cases which was not recommended by SAP...
    Use RSDDS_AGGR_MOD_CLOSE in se37 and execute--->there give ur failed change run no(465451241) beside I_CNSID and execute...
    It releases all the locks by that change run....and continue with your further work/jobs...
    Regards
    KP

  • Customer or vendor master data to include additional information ?

    Any standard Report of customer or vendor master data to include additional information ?

    Hi Goutam
    Can you please be specific??
    When you say standard report, what do you mean by "to include additional information"??
    Thanks
    G. Lakshmipathi

  • How to rectify the errors in master data loads & transactional data loads?

    hy,
    please any one tell me
    How to rectify the errors in master data loads & transactional data loads?
    thnQ
    Ravi

    Hi,
    Please post specific questions in the forum.
    Please explain the error you are getting.
    -Vikram

  • R/3 Master Data Load Error

    Hi Experts
       Our master data load from R/3 to BW was failed today.
    This is the error message on status Tab of failed request
    Diagnosis
    No IDocs could be sent to the SAP BW using RFC.
    System response
    There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of the SAP BW.
    Further analysis:
    Check the TRFC log.
    You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
    Removing errors:
    If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
    I navigated through Environment -> Transact. RFC -> In source system"
    In R/3 i got the following error
    timeout during allocate / CPIC-CALL: 'ThS
    #Timeout during connect                 
    How shall i proceed now.
    Thanks

    Hi,
    Check the RFC connection between R3 and BW. Use transaction SM59 for the same or take help from the BASIS team.
    If that is correct check the EDI partner profiles, if they are active and functioning properly. You can take BASIS help here.
    Cheers,
    Kedar

  • Master data Load Failure

    Hi All,
    Could any body clearly explain the following options in the Info Package of master data Info Object with full update
    Update data
    1. PSA and then into Info Obejcts
    2  . Only PSA   ( Update Subsequently in data targets )
          Data source trasfers no duplicate records
         Igonore double data records
    While I am doing master data load with the 1 and 3 options I am getting same no of records updated in PSA but loadng is getting failured with the 1st option (Caller 01 02 .. 20 Messages ) .and request with 3rd option is success..
    Thanks in Advance...
    Regards,
    Nagamani

    Hi
    U r master data might have the Dublicate records
    select the PSA
    and select the option
    Ignore dublicate data records
    IF  you have the Deblicates
    EX
    CNO
    1010
    1020
    1010
    ITs not alowed the 1010 record
    Regards

  • Master Data loading in BPC 7.5 with prefix

    Hi Gurus,
    I need a help in master loading in BPC 7.5
    Currently we are loading GL account with prefix of A and controlling area(COA1)
    BI:0000600000
    BPC: ACOA10000600000
    I have maintained logic in the transformation file as below. Z001 represents the hierarchy Node.
    ID=IF(ID(1:4)=STR(Z001) then STR(A)+ID;STR(A)0CO_AREAID)
    Now client has came with new requirement as below
                               BI                   BPC
    GL Acc               0000600000     A_600000
    GL Node             Z00113            Z001_13
    GL Node             Z00213            Z002_13 
    For the above requirement i have maintained the logic in the transformation file as below. when running master data load package i got the error as
    Line 755 :Command failed ; end position is out of record index
    ID=IF(ID(1:4)=STR(Z001) then STR(Z001_)+ID(5:12);STR(A_)+ID(5:12))
    I need your help in modifying the logic in the transformation file for handling the above requirement.
    And also for handling two hierarchy Z001 and Z002.
    Thanks
    Mahesh

    Hi,
    Your command should like:
    ID=*IF(ID(1:4)=*STR(Z001) then *STR(Z001_)+ID(5:6);*STR(A_)+ID(5:10))
    Hope this helps.

  • Master Data load does not extract Hierarchy nodes in BPC Dimension ACCOUNT

    Hi Experts,
    I am performing master data load through standard DM package with Filter selection as:
    1. Chart of Accounts
    2. Hieararchy selection has 4 hierarchy names
    3. Selected Import Text nodes
    4. Selected Set Filters by Attribute OR Hierarchies
    I have run this DM package for a set of data and selections a week ago and it worked fine.
    However when i run it now, it is giving issues,
    It extracts any new GL maintained in the BI system however it does not extract any hierarchy nodes at all! (Have tested this by deleting the hierarchy nodes and tried to run the master data load)
    I am running the DM package in Update and have selection as External.
    Any sugestions for checks / has anyone encountered this issue earlier?
    Regards,
    Shweta Salpe

    Hi Guyz,
    Thanks.
    I found that the issue was with the transformation file where i was maintaining the RATETYPE.
    When i removed the mapping of RATETYPE this works fine. (Pulls the nodes of hierarchies)
    however now i do not have Ratetype populated in the system.
    my rate type mapping is:
    RATETYPE=*IF(ID(1:1)=*STR(C) then *STR(TOSKIP);ID(1:1)=*STR(H) then *STR(TOSKIP);ID)
    and in conversion file i have TOSKIP     *skip
    I have to skip the ratetypes for the hierarchy nodes and my hierarchy nodes start with C and H.
    So now that i have removed the mapping for RATETYPE can anyone suggest me a correct way to achieve this? (Note the above mapping formula was skipping all of the hierarchy nodes starting with C and H)
    Regards,
    Shweta Salpe

Maybe you are looking for