Master data medium text
Hi,
Master data medium text and long text is not appearing eventhough i checked Medium and long texts in the master data /texts tab page.Plz let me know the solution.
Thanks,
Sr
Hi,
Where is it not appearing...in the reports??
Just check the business explorer tab for this infoobject and see what is the text maintaned there...if it is short text then you will have to change it to long or medium...the way you want.
Check in the tables and do the mappings and load the data in these two fields...you will get an option to map them in trnasformation.
once loaded and activating the master data and making the settings in the business explorer...you should be able to see it in reports.
Thanks
Ajeet
Similar Messages
-
Master data medium texts not loaded in table
Hi,
I have this Info Object which had only short texts enabled earlier.
I changed this to enable the medium texts and I am loading the medium texts via a flat file.
This worked fine in the development system and the medium texts were populated in the text table.
However once I moved this object to quality; the medium texts are not getting loaded
I debugged the transfer and update rules and I see that in the Development system, the generated program fills both the short and medium texts. However in Quality, the generated program only fills the short texts and no code exists for medium texts.
Can you please let me know how to resolve this issue?
Thanks,
Sita.Hi,
As our experts said may be ur loading data from othe source also for that object
If it is sure that u are loading data from flat file , u know that that object where it is used , either it is a standard object or custom object(Z object)
if it is standard object then it will be used in different places at that time deleting the data also it is to difficult.
u try once again first select the medium text check box and do the activation of that master data object and move the same to quality and check that medium text check box selection option is appering or not then it is appering
then move the data sorce and Transformation and DTP and load the data and try to see the data.
Thansk & Regards,
Sathish -
QM action not allowed for DTP requests in master data and Text tables
Hi,
I have a master data object load request which has failed, returned error in st22 and job finished.
BUT the request has not turned red in the monitor - it's still yellow. That means that I can not delete request nor start new load to infoprovider because it believes a request is still running. But it's not, I've checked both sm37, sm50 etc.
When trying to manually change QM status to 'red' it says 'QM action not allowed for DTP requests in master data and Text tables'
How can I force QM status to red so that I can move on?
Running NW2004s BI (7.0) Patch 15.
I searched for this question but there is no answer
Thank youFolks
I know how frustrating this problem is even in netweaver 7.0 environment. I found a solution for this problem atlast and it works but a not direct way of resolving this issue.
When this request is in yellow status and not able to change / delete the request, its actually in a pseudo status and it is a bug in the program. This request sits in table RSBKREQUEST with processing type as 5 in data elements USTATE, TSTATE and this 5 is actually "Active" status which is obviously wrong.
All we need is, ask your basis person to change the status to 3 in both these data elements and then it allows to reload the delta. Once the delta is successfully loaded, you can delete the previous bad request even though it is still in yellow. Once the request is deleted, the request status gets updated as "4" in table RSBKREQUEST.
Hope this helps.
Thanks -
Loading GL Master Data -- Attributes, Text, Hier ; and Transaction Data
Hi all,
Could any one give me the steps individually to load the following type of data in BI 7.0:
1. Master Data with Attributes
2. Master Data with Text
3. Master Data with Hierarchy
4. Transaction Data
Do I have to create the Transformation and DTP's individually to load all the above kind of Data?
Please give me the information as much as you can.
Thanks,For master data when you create tranformation it will prompt infoobject to act as infoprovider, and then you create DTP to schedule data to it. It works fine with attribute and Texts, though hierarchy dosn;t support much features of 2004s at my side. Like i am not able to migrate Hierarchy datasource to 2004s, and even when i replicate it, it comes as 3.5 datasource only.
For transaction data follow Gokuls step, or try to find on forums you will get lot of discussion on it. -
How to load master data with text into infoObject in BI 7.0
Hi all;
I have an infoobject 0employee ( this is for employee number ,8 character long), with medium text option.
I would like to load Employee name as a text option for employee number.
How do I load this mater data into this 0employee object,
Please help.
I did look for something similar in the forum and there are many of them, but I couldn't find anything that for BI 7.0 and really clear help for me. Sorry to ask a question that been asked before.
thanks.
Raiinehi rainnie,
check this link t oload master data in BI 7
Re: BI 7.0 flat File extraction
as you are using SAP defined infoobject you can start from the creation of datasource.
text format for the flat file is
LANGUAGE,INFOOBJECT,TEXT
EN,0EMPLOYEE,RAINNIE
You have to create ,infopakage, transformation ,dtp for both the attribute and text.
hope this helps
cheers
Sunil -
Master data load: texts are not loaded
Hi friends,
Trying to load BW Hierarchy(0COSTCENTER) to BPC dimension(P_CC).
Loadedd master data & text data using package "Import master data from BI infoobject"(/CPMB/IMPORT_IOBJ_MASTER), but EVdescription (texts) are not uploaded ino BPC dimension (P_CC).
Because of above error, when i try to load hierarchy(0costcenter), sytem throwoing one more error(JScrpit evaluation error).
Now i want to load texts into P_CC. ours is bpc 75nw sp10.
Found 2 notes, but these are related to older support packges
1462732 u2013 DM: text node descriptions canu2019t be imported.
1531601 - Incident 737084 / 2010 / text nodes aren't loaded
Transformation file:
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=-1
ROUNDAMOUNT=
*MAPPING
ID=ID
CURRENCY=0OBJ_CURR
*CONVERSION
DM package run:
Infoobject: 0COSTCENTER
set selection: Attributes Controlling area = SP00
Hierarhcy: import text node(yes), selected hierarchy, version(empty),memberid(SP001170),level(not filled)
language: English, medium description,
attiribute list: currency(0OBJ_CURRENCY),controlling area
fileter by attributes or hierarhies option selection,
Mode: Update
Format: internal
Dimension: P_cc
package ended with error
Failed to write text of master data; check the error message
checked BPC dim, only member ID & currency is updated, but not evdescription.
Can you please share valuable inputs.
thanks,
nareshresolved problem.
Packages given bpc7.5 nw sp10 are is exactly working.
Mapping section:
ID=0CO_AREA+ID
CURRENCY=0OBJ_CURRENCY
becoz base members are automatically added with controlling area in BW hierarchy on 0costcenter.
Followed method given in how to guide. -
Can the partner master data ( name, text ) be used in a Query
Hi,
I have a requirement to have query against CRM cubes/ods, which can query data by Partner address or text (Short description, Medium description or Long description).
For example, the cube has a characteristic 0CRM_SOLDTO ( Sold to party ) and we can always write a query which will have this field as a variable in the selection field and then query the appropriate data. But can we also query the data as per the partner name or short description or address( say zip code ? ).
If yes can you please let me know how. For example consider the following simple example cube which has a characteristics as Customers( say 1000001... and the characteristics "customer" has master and text data ( short text say "company x".
How to write a query against the cube which will take the customer text as input field and display the relevant data.
Thanks
ArunavaHi
I am even not aware of a standard function to do it. But one more option I can think of. But this only applicable with simple reports & with restricted kef figures.
1. You create a dummy sold-to-party (S2)
2. Add it to the same or different dimension as that of origional sold-to-party (S1) in the cube.
3. Create a structe in the report for your KFs or RKFs.
4. Create one RKF with S2 and with some key figure like "no of records". Create a variable V2 on S2 (user entry) and include this in the RKF. Hide this RKF. (So, basically you use this RKF to invoke the variable V2 to accept the Text of sold to party when the report is executed).
5. Include the required KFs (or RKFs with S1) in the structure. Create a customer exit varaible V1 (Not ready for input) on S1. In this exit, determine the Sold to Party ID from the Text entered in V1 & the text table of sold to party.
Basically, what ever we do in update rules (as suggested earlier), now we do it in a customer exit. hope this helps.
regards,
atlaj -
Hi expart,
I have created customize infoobject for master data upload. Following steps I have done :
1. Create info object for master data upload
1. Create Datasource( RSO2) in R/3 with text option ( R/3 table feilds code, description)
2. Replicate data source ( BI)
3. Create transformation ( BI )
I am unable to map description with info object.
Pls. help which step I am missing.
Thanks in advance,
GoutamHi Gautam,
Check the properties of Master data infoobject.
In Master data/texts tab page.
i. Select With master data and With texts if they are not already selected.
ii. In the field below Character. is InfoProvider, enter the technical name of your InfoArea and confirm your entry.
The system sets the indicator Character. is InfoProvider.
iii. For the characteristic Select the indicator mentioning short/medium/ long text.
Then activate the master data object. Now try to create the transformation...
check the below link for step by step procedure..
http://help.sap.com/saphelp_nw04s/helpdata/en/46/94bc9ab90819aee10000000a11466f/content.htm
Edited by: Priya.D on Mar 15, 2010 9:43 AM -
Upload vendor master data long texts to CRM
Hi
I do have the same problem of this thread:
[CRM Middleware - R3 to CRM - Long Text transfer |CRM Middleware - R3 to CRM - Long Text transfer]
Does anyone know how to upload long texts of Vendor master data to Business Partner mater data?
Thanks in advance for any help
PierluigiBy learning the basics of BDC recording and the use of GUI_UPLOAD
-
0distr_chan initial master data load, text missing
Hey: I am trying to do an initial master data load for 0distr_chan on text. The load is not successful. In the monitor detailed error message, it has red alert for transfer rules missing message, update missing message.
0distr_chan attibute is OK.
I am also having problems when loading 0salesorg on text. It fails also.
Can anyone give me a clue?
Thanks!Hi, thank you for your answer. I am new to this system. Please give me more guidance.
To check on datasource on R3, I use transaction RSA6, underneath the SD-IO master data, I found 0DISTR_CHAN_TEXT with green text icon on the right. Is this a valid way to verify that datasource for 0DISTR_CHAN_TEXT has been activated OK on R3? I am not sure if there is any way for me to check if any transfer rules for the datasource has been activated OK on R3.
thanks! -
hi friends,
i created zcustomer now i loaded attributes data in master data tables
right click customer maintain master data , its showing.
i check with text also,
in 3.5 just i was creating extra excel sheet loaded text also ( 2 info packages 1 for att another for text)
in 7.0 i loaded attributes.
when i see my data ist zcustomer with attributes 2 loumns are free like text and description
now i need create another datasource , should i create any characters for this like text and description? to load text data?Hi,
check the following thread, its very explanative:
Need help to load data in data target in BI7 version. -
Hello Everyone,
I am trying to load sample Master Data. Can do that successfully for Attributes but not for Text. Can anybody help me.
Thanks
Points would be assigned for those answers which will resolve the issueHi SAS,
Suppose your master data attribute data will be like this,
MaterialID , Material Name , Material Group
CSV file will be like this,
M001 X001 Y001
M002 X002 Y002
For this if you want to load text data means,
The fields are
MaterialID, 0Langu , 0txtsh
CSV file for this will be like this,
M001 EN SAMPLE
M002 EN SAMPLE
So you are loadind text for that same material ID or different material ID?
and alsi check if there any lowercase letters in your CSV file .
Regards,
Arun.M.D -
Master data deletion - text with compounding
HI All,
I have " 0PYMT_METH" Info object which is having "0PYMT_METH_TEXT" Data source. " 0PYMT_METH" Info object is having text and 0country with compounding attribute.
- First , I did not load this master data , I loaded transactional data. so some values for key are loaded without text and country in master data.
- Later i came to know we need text for paymnt method, then i loaded again master data. but i am not able to delete previous entries which have blank text.
-i deleted data with SIDS and deleted all the transactional data , still i am getting that entries with blanks.Because of this in report output i am getting # value for the text.
How to solve this? Is it because of compounding attribute ? If so can u please suggest regarding this ASAP?
Thanks in advance,
JoHi,
Please check the data load for the text as you must be loading
MAster Data CHAR , Country , LANGUAGE and TEXT as fields in your data source.
As the Text can be over written so if the porper key fields are matched the text should be modifyed everytime.
SO please check what combination you r loading .
ANyway if that is one time , and very less data you can manually maintain th text for master data .
In order to delete teh data you use SE14 use the text table there to delete the data. PS : This is not recommended solution . -
hi ,
I have a Info Object (IO) called AA.
This AA has a Compounding Character CostCenter and Controlling Area.
I have created my own extractors in the R/3 side seperately for Attribute and Text.
When i pull in the Attr and Text extractor :
they both form 2 diff rows / records in the MAster data Table.
And i am hoping to get the attr and the descript in the same line.(that s the normal way -rigth ??)
Is it Due to Compounding ??
If so In the Transfer Structure for Text,
I have linked Costcenter , AA and AA's description.
Thanks,
GGHi GG,
When creating a compoundig infoobject at the database level system with create a table with Compounding primary keys. IN this example we have COSTCENTER, CONTROLLING AREA AND AA as a Compunding primary Key. So we need to see that the Text and Attributes loaded with same keys (ie COSTCENTER, CONTROLLING AREA AND AA) otherwise will be shown as two diff records.
Ex: Attr
COSTC CA AA attr
1000000 1000 10001 Attr1
Text
AA Text
10001 text1
will be shown as diff records because these two have diff primary keys.
Let me know if you need more info.
Regards,
Varma -
Master data, attributes, texts: ETL process
Hi,
I am new to SAP BW and have a question concerning the difference between master data attributes and texts. I am currently learning with the "sflight" example provided by SAP. There I have, e.g., a table like this:
CARRID CARRNAME CURRCODE
AA American Airline USD
AB Air Berlin EUR
AC Air Canada CAD
These are my master data because these data won't change often - correct?
What are then my attributes and texts?
Thanks!Thanks Choudhary.
I am Karthik, new to both, the community and SAP BI. I have a doubt similar to the main question, that goes like this.
CARRID CARRNAME CURRCODE TIME COUNTRIES_OPERATION
AA American Airline USD 9:00 AM America
AB Air Berlin EUR 10:00 AM Germany
AC Air Canada CAD 11:00 AM Canada
Similar to the above table, if suppose there are two other columns TIME and COUNTRIES_OPERATION,
1. Will TIME be included as "attributes" or "time characteristics" as TIME is an additional information of the master data key and there is dimension table where we can define TIME ?
2. Will COUNTRIES_OPERATION be included as "attributes" or can this be included in "hierarchy"
3. If not what can be used into "hierarchy" from the above table.
Kindly excuse if my question is silly or if it does not make sense. I am very new to these terms and still in the learning curve.
Thanking you in advance,
Karthik.
Maybe you are looking for
-
How do I fix all of the lightboxes being open and unable to click off?
I've built a site in Muse ans exported it as HTML and everything looks great except all of the lightboxes. It works fine in preview, however when live and in browser, all of the lightboxes are active and I can't click off of any of them. Would love a
-
Assign field symbols in infotype 0021 BADI implementation (HRPAD00INFTY )
Hi there, In PA30 infotype 0021, i have to change the value of T_VIEW_REPID by implementing BADI HRPAD00INFTY [Program MP002100->screen 2000->MODULE BEFORE_OUTPUT->PERFORM badi_before_output(sapfp50m)]. I'm trying to use field symbols (as below) to c
-
Can't get AIM/AOL account to work in Mavericks' Messages
Messages works fine with my iCloud/Mac/Me address. But when I try to add the AOL one (which is still the only protocol in Messages/iChat that works with screen sharing), it gives "unknown error." I've verified the name/password by logging directly in
-
Lost my Airport Express after latest iTunes update
So I did the latest update (9.03) and lost my APE. Reset the device and added it back onto my network. Everything is green and good to go.......... except " An error occured while connecting to the remote speaker "XYZ". An unknown error occurred (-15
-
Trouble importing from Canon HG10
I have a Canon HG10 camera (HDD, AVCHD). I'm having trouble importing to iMovie '09 (8.0.6). Initially the camera was not being detected by iMovie at all (it did mount on the desktop). Searching the forums (here and elsewhere) it seemed that this was