Master Data "Simulate Update" and REAL update differences

Hi there everyone.
My issue is this. When I load my 0EMPLOYEE Master Data the new records are not written in the infoobject and I don't understand why?
When I go to the Loading monitor, "Details" tab > Data package then right click and choose "Simulate Update" everything simulates perfectly, but afterwards, in the real infoobject the data is unchanged!!
I activated the data, so, there is no problem there...
Any ideas?
thanx

That's a little strange, if your data goes to PSA and in simulate is seems that it is sent write, there's something not allowing your data to be written.
Nevertheless did you check your update rules (transformation) if there is something not allowing the data to be written?
I'm having no more ideas...
Try to create another infopackage and running different selections for 0employee. Check the time intervals (time dependent) while executing the infopacakge (if they are ok to bring data).
Diogo.

Similar Messages

  • How to look up master data in update rule

    Hi Friends,
    I want to Fill a characteristic of an info cube using the attribute value in a master data in Update rule.
    Eg: I want to fill a field in cube 0PM_C01 that is got from Master data 0PM_ORDER. I have to do this in upate rule. Can anyone help me.
    Joe

    Eugene, Atlaj
    Your answers were very useful.
    Eugene as you said,
    I read the link you mentioned and I can use code
    like this
    DATA: mat LIKE /BI0/PMATERIAL-MATERIAL.
    SELECT SINGLE MATERIAL FROM /BI0/PMATERIAL INTO mat
    WHERE EANUPC = COMM_STRUCTURE-EANUPC AND OBJVERS = 'A'.
    IF SY-SUBRC = 0.
    RESULT = mat.
    RETURNCODE = 0.
    ELSE.
    RETURNCODE = 8.
    ENDIF.
    But for each record of comm structure the selection quer y will touch the Data base. As Atlaj said, can I fill the internal table in the start routine and look it up in the update rules. I think the performance willbe increased. Could you give me code sample or link?
    Thanks in ADV
    Joe

  • Access master data in update rules

    Hi,
    I try to calculate a weight in my update rules. Therefore I need the product weight and the number of peaces. I try to read the product weight from master data. The problem is, that it always calculates zero as the result. Is it possible to read master data in update rules?
    If I try to calculate the weight in the transfer rules, I get the message in the monitor, that the transfer rules don't finish. Do you have an idea what to do?
    Regards,
    Gabi

    Hi Robert,
    here is my code in the update rule.
    fill the internal table "MONITOR", to make monitor entries
      DATA: l_s_errorlog TYPE RSMONITOR.
      data: temp_prod_weight type /BIC/PZL2_P_ID.
    general values
      RESULT = COMM_STRUCTURE-/BIC/ZL2_POTMW.   "weight
      UNIT = COMM_STRUCTURE-UNIT_OF_WT.
      RETURNCODE = 0.
      ABORT = 0.
    calculate weight from master data, if it is zero
      IF COMM_STRUCTURE-/BIC/ZL2_POTMW = 0
      or COMM_STRUCTURE-/BIC/ZL2_POTMW = '0'
      or COMM_STRUCTURE-/BIC/ZL2_POTMW is initial.
        select single /BIC/ZL2_NETW UNIT_OF_WT
        from /BIC/PZL2_P_ID
        into corresponding fields of temp_prod_weight
        where /BIC/ZL2_P_ID = COMM_STRUCTURE-/BIC/ZL2_P_ID
        and objvers = 'A'.
        if sy-subrc <> 0.
          l_s_errorlog-MSGTY = 'I'.
          append l_s_errorlog to MONITOR.
          RESULT = 0.
    abort, if calculation is not possible
          ABORT = 1.
        else.
          RESULT = temp_prod_weight-/BIC/ZL2_NETW
    COMM_STRUCTURE-/BIC/ZL2_POTMQ.
          UNIT = temp_prod_weight-UNIT_OF_WT.
        endif.
    ENDIF.
    convert unit
      CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
        EXPORTING
          INPUT                      = RESULT
        NO_TYPE_CHECK              = 'X'
        ROUND_SIGN                 = ' '
          UNIT_IN                    = COMM_STRUCTURE-UNIT_OF_WT
          UNIT_OUT                   = 'KG'
        IMPORTING
        ADD_CONST                  =
        DECIMALS                   =
        DENOMINATOR                =
        NUMERATOR                  =
          OUTPUT                     = RESULT
        EXCEPTIONS
          CONVERSION_NOT_FOUND       = 1
          DIVISION_BY_ZERO           = 2
          INPUT_INVALID              = 3
          OUTPUT_INVALID             = 4
          OVERFLOW                   = 5
          TYPE_INVALID               = 6
          UNITS_MISSING              = 7
          UNIT_IN_NOT_FOUND          = 8
          UNIT_OUT_NOT_FOUND         = 9
          OTHERS                     = 10
      IF SY-SUBRC <> 0.
        l_s_errorlog-MSGTY = 'I'.
        append l_s_errorlog to MONITOR.
        UNIT = COMM_STRUCTURE-UNIT_OF_WT.
        RESULT = COMM_STRUCTURE-/BIC/ZL2_POTMW.
      ELSE.
        UNIT = 'KG'.
      ENDIF.
    I'm loading via PSA, but I have problems to debug the code. If I set a break point in my code (command break-point), I can't stop at it.
    Thanks,
    Gabi

  • FM for master data creation/update

    Hello all,
    I would like to ask you for a FM for master data creation/update.
    Thanks all for your help.

    The answer is API_SEMBPS_CHA_VALUES_UPDATE.

  • Critical Error in master data: Transffered 250056  and added 0 enhancement

    Hi,
    First we have loaded master data into 0CUSTOMER and there after enhanced the datasource and mapped the same in transfer rules and update rules.
    We loaded data again into master data with full update. But  the enhaced fields data is not getting updated. But in PSA data is available.
    We deleted the all master data at Maitainence and relaoded data.
    Now its showing 250056 as transffered and added as 0
    we didnt seen any single record in master data now.
    I have actovated data and attributre change also done.
    But no success.
    Please suggest us what should i do now.
    Thnaks &Regards,
    Revathi

    Hi,
    The data is available for the all enhanced fields in PSA.
    For the master data Text also data there in infoobject maintainece.
    For the enhanced and all the other attributes data is not aviale.
    If i load data again with full load also it is Transffered 250056  and added 0
    But In data load monitor i obseved one thing ....
    in the details tabprocessingdatapavckages--update rules it saying Update rules ( 0 Records ) : No errors.
    But for transfer rules istep it is giving message Transfer rules ( 4139  Records ) : No errors .
    So till here data is processing...in update rules it is not.
    We dont have any routines in update rules. and its one to one mapping.
    Please suggest how to get it resolve.
    Thanks &Regards,
    Revathi

  • What are the T-codes that contain the master data for material and vendor?

    what are the T-codes that contain the master data for material and vendor?

    hi ,
    - Display Material  tcodes...
    MM01 - Create Material
    MM02 - Change Material
    MM03 - Display Material
    MM50 - List Extendable Materials
    MMBE - Stock Overview
    MMI1 - Create Operating Supplies
    MMN1 - Create Non-Stock Material
    MMS1 - Create Service
    MMU1 - Create Non-Valuated Material
    ME51N - Create Purchase Requisition
    ME52N - Change Purchase Requisition
    ME53N - Display Purchase Requisition
    ME5A - Purchase Requisitions: List Display
    ME5J - Purchase Requisitions for Project
    ME5K - Requisitions by Account Assignment
    MELB - Purch. Transactions by Tracking No.
    ME56 - Assign Source to Purch. Requisition
    ME57 - Assign and Process Requisitions
    ME58 - Ordering: Assigned Requisitions
    ME59 - Automatic Generation of POs
    ME54 - Release Purchase Requisition
    ME55 - Collective Release of Purchase Reqs.
    ME5F - Release Reminder: Purch. Requisition
    MB21 - Create Reservation
    MB22 - Change Reservation
    MB23 - Display Reservation
    MB24 - Reservations by Material
    MB25 - Reservations by Account Assignment
    MB1C - Other Goods Receipts
    MB90 - Output Processing for Mat. Documents
    MB21 - Create Reservation
    MB22 - Change Reservation
    MB23 - Display Reservation
    MB24 - Reservations by Material
    MB25 - Reservations by Account Assignment
    MBRL - Return Delivery per Mat. Document
    MB1C - Other Goods Receipts
    MB90 - Output Processing for Mat. Documents
    MB1B - Transfer Posting
    MIBC - ABC Analysis for Cycle Counting
    MI01 - Create Physical Inventory Document
    MI02 - Change Physical Inventory Document
    MI03 - Display Physical Inventory Document
    MI31 - Batch Input: Create Phys. Inv. Doc.
    MI32 - Batch Input: Block Material
    MI33 - Batch Input: Freeze Book Inv.Balance
    MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
    MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
    MIQ1 - Batch Input: PhInvDoc. Project Stock
    MI01 - Create Physical Inventory Document
    MI02 - Change Physical Inventory Document
    MI03 - Display Physical Inventory Document
    MI31 - Batch Input: Create Phys. Inv. Doc.
    MI32 - Batch Input: Block Material
    MI33 - Batch Input: Freeze Book Inv.Balance
    MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
    MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
    MIQ1 - Batch Input: PhInvDoc. Project Stock
    MI01 - Create Physical Inventory Document
    MI02 - Change Physical Inventory Document
    MI03 - Display Physical Inventory Document
    MI31 - Batch Input: Create Phys. Inv. Doc.
    MI32 - Batch Input: Block Material
    MI33 - Batch Input: Freeze Book Inv.Balance
    MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
    MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
    MIQ1 - Batch Input: PhInvDoc. Project Stock
    MI21 - Print physical inventory document
    MI04 - Enter Inventory Count with Document
    MI05 - Change Inventory Count
    MI06 - Display Inventory Count
    MI09 - Enter Inventory Count w/o Document
    MI34 - Batch Input: Enter Count
    MI35 - Batch Input: Post Zero Stock Balance
    MI38 - Batch Input: Count and Differences
    MI39 - Batch Input: Document and Count
    MI40 - Batch Input: Doc., Count and Diff.
    MI08 - Create List of Differences with Doc.
    MI10 - Create List of Differences w/o Doc.
    MI20 - Print List of Differences
    MI11 - Physical Inventory Document Recount
    MI07 - Process List of Differences
    MI37 - Batch Input: Post Differences
    for vendor..
    XKN1  Display Number Ranges (Vendor)
    XK01  Create vendor (centrally)
    XK02  Change vendor (centrally)
    XK03  Display vendor (centrally)
    XK04  Vendor Changes (Centrally)
    XK05  Block Vendor (Centrally)
    XK06 Mark vendor for deletion (centrally
    XK07  Change vendor account group
    XK11  Create Condition
    XK12  Change Condition
    XK13  Display Condition
    XK14  Create with cond. ref. (cond. list)
    XK15  Create Conditions (background job)
    reward points if useful,
    venkat.

  • How to find all the Master data extract structures and Extractors

    I intend to create Master data dimensions closely similar to SAP BI in a 3rd party system. I would like to use SAP's standard extractors for populating the master data structures in SAP BI and then use a proprietary technology to create similar structures in a 3rd party database.
    Question: How to get a complete list of all Master data extract structures and corresponding extractors?
    Example: In ECC if I do SE80 and give 'Package' and 'MDX' and then press the 'display' spectacles, I get a list of structures and views under "dictionary objects" covering Material, Customer, Vendor, Plant Texts and attributes.
    How do I get the remainder of the Master data extract structures viz. Purchase Info Records, Address, Org Unit etc?
    Regards
    Sasanka

    Hi,
    try the table ROOSOURCE and search the data source with string in astrick attr  for master data and for text with text
    This will give you the list of all the master data source in the system and it contains a column which tells about the extract structure and function module used by each.
    Thanks
    Ajeet

  • Sending Master data - differentiate full and discrepancies

    Hi experts,
    we need to send master data from SAP, and for materials and customers data, we have the following requirement :
    - send full data to some legacies
    - send discrepancies to others.
    Is there a way to handle that in PI or with partner profiles or maybe by creating 2 different ports ?
    Thanks a lot in advance for your help,
    Jamal

    Hi Boom,
    How do you whether its a master data or discrepancy data? Is there any field which differentiates? If yes then you can use couple of receivers in your receiver determination. So write a xpath conditon to find which data it is and then trigger the appropriate receiver. So which ever condition is satisfied it triggers the corresopnding receiver which should take care of the issue you are facing.
    Regards,
    ---Satish

  • BP Master Data gets updated when (AR/AP) Invoice is raised

    Hi All,
    I am running SAP B1 8.8 and I discover that whenever AR or AP invoice is raised, it will update the business partner master data. On the master data of the particular BP where the invoice was raised, I went in and click on the change log, the date of latest update is the same as the date when the invoice is raised. I was wondering why SAP B1 8.8 is doing that? I am running the latest PL which is PL 14 hotfix. But I don't think it's PL 14, as I can see the history of te change log was created even before I updated my B1 to PL14 hotfix.
    I have done multiple invoices with the same BP, and it seemed the update only happened once, which was the first time an invoice is raised.  Just curious as to why the BP master data needs to be updated.
    Many thanks.
    Cheers.
    Kevin

    Hi Rahul,
    I have checked, no FMS. But do you get the same pattern though? When AR/AP invoice is raised a BP, then go that BP master data, click on its change log under tools. Do you see the latest date of the change is the same as your invoice date?
    Thank you.
    Regards,
    Kevin

  • Master data delta update to data souce not possible

    Hi,
    0material_att data source delta update failed for a few days from the process chain and when I tried to manually run the delta infopackage, I got this message:
    Last delta update is not yet completed
    Therefore, no new delta update is possible.
    You can start the request again
    if the last delta request is red or green in the monitor (QM activity)
    I did "manage" for this data source but none of the failed delta run showed in there. I also looked for cancelled jobs in sm37 but nothing came up either. So I ran a full upload without deleting the data as my user is waiting for this fix to be shown in the report. What can I do now to enable the delta run again without deleting the data?
    sharon

    Hi Sharon,
    chk in RSMO for that master data 0material_attr, if there are any red/yellow req. If so change the QM status to RED again and goto IP and trigger the load again (it wil say that earlier delta has failed and if u want to Repeat ;ast delta,) in that give OK and exe the load again.
    In some cases, the datasource will not support repeat deltas, in that case do a re-init for the master data load. (no need to delete any datas.)
    Hope this helps. If you have any queries please ask.
    Thanks!
    Dharini

  • What tasks need to be done after master data is updated on R/3 side.

    Hi all,
    One of end user didn't enter the descriptions for few of the 0costcenters on the R/3 side. Now as he likes to see the descriptions , he's updating the information on R/3 side. What will be the tasks a bw backend person should perform in order to update the descriptions for costcenter.
    I think  they have to run the delta load for 0costcenter master data and do a ACR- Attribute change run.

    Hello
    If its just a descriptions. Then just full Text load for 0Cost_center should be good enough to show them in the BW Reports
    Thanks

  • Look up at master data in  update routine

    Hi all,
    I am loading from flat file in to an infocube. My transaction data comes in the format Subcategory, Area,Date, Sales qty,UOM. But my infocube should be filled with Category,Subcategory,Region,Area,Date,SalesQty,UOM. My business requirements want me to model Category, Subcategory,Region area as characteristics of dimension. ie I cannot model Category as navigational attribute of Subcategory and Region as navigational attribute of Area.
    But I can get the master data file for Subcategory in Sucategory, Category format and Area in Area, Region format. So when I load the transaction data I can make a table lookup on these master data table and fill the required fields.
    But the problem is I donot have much experince in ABAP routines.
    Can any one help me with a sample start/update routine on how to do this.
    Any help will be appreciated.
    Regards,
    Amith

    Amith,
    Actually, you may everything do in a start routine of the URs (including lookup itself).
    There is no need to declare internal table in a global part of routine and then read values in routines.
    The code may look the following. (Don't have the system on hand. So, some syntax may require some modification.)
    TABLES: <Your Master Data Table>.
    DATA: wa_temp TYPE DATA_PACKAGE_STRUCTURE OCCURS 0 WITH HEADER LINE,
         wa_md TYPE <Your Master Data Table>  OCCURS 0 WITH HEADER LINE.     
    SELECT * FROM <Your Master Data Table> INTO wa_md.
    SORT wa_md ASCENDING BY <Basic Char Key>.
    LOOP AT DATA_PACKAGE INTO wa_temp.
       READ TABLE wa_md WITH KEY <Basic Char Key> = wa_temp-<Basic Char Key>.
       wa_temp-<YourLookupIO> = wa_md-<YourLookupAttribute>.
       MODIFY DATA_PACKAGE FROM wa_temp.
    ENDLOOP.
    Best regards,
    Eugene

  • Loading time-dependent master data using update rules/transformations

    Hi
    I am trying to load time-dependent master data to an infoobject. It seems that I get an error message on duplicate records if I use a transformation or update rule. Does this only work with direct update ?

    In the DTP you have the option to ignore duplicate records....
    Just select that and then load data...

  • Master Data not updating

    We have found that are master data text isn't updating in APO from BW.  I can see that the data is in the APO PSA but doesn't reflect in the master data object.  We tried deleting the master data but the application advises that you cannot delete master data that's being referenced.
    Are these problems related?
    Why will the master data descriptions not update?
    Please suggest a solution.

    We have are pulling the description text from BW into APO via a master text load.  I am loading the data into the PSA and then into the maste data object.  The PSA shows the correct description.  When I view the master data, the description is empty.  We are updating 0LANGU, QSMATNR, and 0TXTLG.  When I look at the info object table /BIC/TQSMATNR, there are no table entries.

  • Asset Master Data not updated

    Quantity purchased via PO is not updating the master data of the newly created fixed assets.
    When created and inserted into any number, the amount is updated with the purchase.
    What do you make the purchase of newly created assets are properly updated in the asset master data?
    GLippmann

    The SAP Notes instrctions solved the problem.
    Thank you mvery much.
    Best Regards...
    GLippmann

Maybe you are looking for