Master Data With Custom Datasource.

Hi,
When we create the custom datasource ( Transactional ) and load it to the BW, it has master data field Company code,Cost Centre.
Doubt is when the company code, Cost Centre are coming from the transactional Custom data source(with data), do we need to still load the Master data from the Master data data sources .
What are points to be considered and known?
Please provide your valuable inputs to understand this condition.

Hi Adhvirao,
As suman said there is master data sources like customer master, vendor master...
check there is SAP predefined master datasources like 0CUSTOMER_ATTR..
First you have to load master data and the only transaction data.. then only you can get rid of data mismatches in the report.
Otherwise there will SID collusion, then it might be chaces you won't get the proper result in reports.
Regards,
Ranganath.
Edited by: Ranganath on Jul 27, 2011 1:01 PM

Similar Messages

Is it possible to make a delta load for a Master data with Standard DS

I have a full load bringing huge data for master data with standard datasource.
I want to run a delta due to huge no. of records but when I create a new Infopackage it dont give a option for delta update.
Are delta loads specific to only standard or customized DS's or any other reason behind that ?

I kind of understand what you are asking about, but I am unclear as to how it pertains to our BO SDK.
You are wanting to find the differences between a large dataset and another large dataset.
I am not sure what an Infopackage is.
Are you using the BO Enterprise SDK or some other product?
Jason

How to Load the Master Data for custom defined Z infoobjects?

Hi Gurus,
This is the requirement.
Some screen enhancements has to be made by adding new Custom fields( like two text boxes,eg Name and city ) in such a way if we enter data into that text box,that data value for both of the Enhancements has to be stored in some table.If this data is a master data,then how would I pull this master data into BW.
Please someone throw some light on this problem.
Lets say a Screen is enhanced with NAME and CITY with text text boxes.Let the user enters the value for NAME and CITY.Let them be stored under two different tables ZTAB1 and ZTAB2.How would I load this master data into custom Defined Z infoobjects ZNAME AND ZCITY in BW.
Please help me out.
Thanks is Advance,
Regards

you can by creating generic datasources on thoase tables with Full load or delta.
if the number entries is less.. you can try full load...
if it is more... along with required fields...put date also as one fields. which needs to get date of execution of program or date of uploading to Tables. this will be useful build Delta Mechanism.
all the best.
Nagesh Ganisetti.

Business Partner Creation ( Master Tenant with Customer Account)

Hello Experts
Am trying to create a master tenant with a customer account, but as i save the business partner there is no corresponding creation of the master tenant with a customer account in the company code. The system only generates a business partner created. I have cheked the settings on business partner customer and have the correct FI custmer acount to the business partner, have also checked settings on the assignment of the reconciliation account to the BP and again it is compatible with the customer reconciliation account in Financials. I have also the synchronization data to see whether the synchronization object is activated, and it was not activated and i activated it, but still am not able to create a master tenant with customer account.
Please Experts help me on this am very very stranded
Regards
David Mavi

Hi David,
Following activities are to be done to create customer simultaneously while the creation of business partner.
Business Partner Number Range: IMG>Flexible Real Estate Management (RE-FX)>Business Partner>Relevant Settings for Business Partner in RE Context>Number Range>Business Partner Number Range
Define Grouping and number range: IMG>Flexible Real Estate Management (RE-FX)>Business Partner>Relevant Settings for Business Partner in RE Context>Number Range>Define Groupings and Assign Number Ranges
Also make sure that the customer account group is created with a number range which should be external. The number range for the business partner should be internal.
Master Data syncronization: IMG>Cross Application Components>Master Data Synchronization>Customer/Vendor Integration>Business Partner Settings>Settings for Customer Integration>Field Assignment for Customer Integration>Assign Keys>Define Number Assignment for Direction of BP to Customer
In the settings select the same number range only if the number ranges for the customer account group and BP groups are the same.
If u have done all these things and still the customer is not getting created then there might be a problem of the mandatory fields. i.e may be in customer account group some fields are mandatory which are not getting copied from the BP. So make all the fields in the customer account group as optional. and try to create new BP again.
Regards,
Deepak M

Deletion of master data with / without SID

Hi Experts,
Client have requested for master data clean up.
Requirement:
"Several masterdata tables in Production system contain wrong entries. These entries should be cleaned up. The attached Excel contains the keys of the entries to be deleted"
Steps to be taken:
1. emptied/deleted content of all the cube.
2. delete data from master data
Help required:
What will be impact of deleting master data with SID when DSO data is not deleted.
What if i choose without SID option for deletiing master data
Regards
Suresh Kumar

Hi Suresh,
Deleting master data is one critical job and ned to be very care ful.
First try to find out the where used list of that particular IO. delete data from all the CUBEs and DSOs. i don't think without deleting the transaction data from all the objects that you see from where used list, you will be able to delete the maste data.
System doesn't allow you, it will say "Not all selected data is deleted" Some message of this sort when you try deleting the master data.
If you are deleting the TD and master data, why do you need the SID to be spared, delete them too. next time you load the correct master data. the SIDs are again generated.
Go thru the below thread, this gives you lot if info on MD deletion.
[Re: SID Tables]

Use of "with master data & with out master data" at DTP update level

Hello experts,
In DTP, I check "with out master data". When I try to send corresponding transactional data, It is showing SID related error. Can anybody suggest what is the use of "with master data & with out master data" at DTP level.
Thanks in advance,
Zakir.

HI
HI in DTP level If you set this indicator, the system terminates the update of the request if no values are available for a data record.
Load the relevant master data before you load the transaction data.
If you set this indicator, the system terminates activation if master data is missing and produces an error message.
If you do not set this indicator, the system generates any missing SID values during activation.
In DataStore maintenance, if you do not set the SIDs Generation upon Activation indicator, the No Update without Master Data indicator in the DTP has no effect.
thx
vijju

Error handling for master data with direct update

Hi guys,
For master data with flexible update, error handling can be defined in InfoPackege, and if the load is performed via PSA there are several options - clear so far. But what about direct update...
But my specific question is: If an erroneous record (e.g invalid characters) occur in a master data load using direct update, this will set the request to red. But what does this mean in terms of what happens to the other records of the request (which are correct) are they written to the master data tables, so that they can be present once the masterdata is activated, or are nothing written to masterdata tables if a single record is erroneous???
Many thanks,
/ Christian

Hi Christian -
Difference between flexible upload & Direct upload is that direct upload does not have Update Rules, direct upload will have PSA as usual & you can do testing in PSA.
second part when you load master data - if error occurs all the records for that request no will be status error so activation will not have any impact on it i.e. no new records from failed load will be available.
hope it helps
regards
Vikash

BPC 7.5 NW: Master Data with leading zeros

In BPC 7.5 NW, is it still an issue to have Master data with leading zeros?
In other words, is it still not advisable to have leading zeros in the Master data.
Let me know your views.
Thanks.

I was also having the same issue almost in the same version.
Other than what you mentioned, the master data was also jumbling up like 0120, 0130, 0145, were set up as 120, 145, 130....
The workaround that we took was to put a leading alphabet, when the data comes into BPC.
Try doing that, it will surely help.
Hope this helps.
Thanks.
Anand

For uploading master data(ex:customer data) into sap,

hi
for uploading master data(ex:customer data) into sap,
which methods you prefer? call
transaction/session/lsmw/bapi? why?
Thanks
Rama

Hello,
Check this:
COde:
REPORT zprataptable2
       NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
        i1 TYPE i,
        lifnr LIKE   rf02k-lifnr,
        bukrs LIKE   rf02k-bukrs,
        ekorg LIKE   rf02k-ekorg,
        ktokk LIKE   rf02k-ktokk,
        anred LIKE lfa1-anred,
        name1 LIKE lfa1-name1,
        sortl LIKE lfa1-sortl,
        land1 LIKE lfa1-land1,
        akont LIKE lfb1-akont,
        fdgrv LIKE lfb1-fdgrv,
         waers LIKE lfm1-waers,
        END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
        j1 TYPE i,
        banks LIKE lfbk-banks,
        bankl LIKE lfbk-bankl,
        bankn LIKE lfbk-bankn,
         END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
      filename = 'C:\first1.txt'
      filetype = 'DAT'
    TABLES
      data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
   EXPORTING
     filename                      = 'C:\second.txt'
     filetype                      = 'DAT'
    TABLES
      data_tab                      = jtab.
LOOP AT itab.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RF02K-KTOKK'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'RF02K-LIFNR'
                                  itab-lifnr.
    PERFORM bdc_field       USING 'RF02K-BUKRS'
                                  itab-bukrs.
    PERFORM bdc_field       USING 'RF02K-EKORG'
                                   itab-ekorg.
    PERFORM bdc_field       USING 'RF02K-KTOKK'
                                   itab-ktokk.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0110'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFA1-LAND1'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'LFA1-ANRED'
                                  itab-anred.
    PERFORM bdc_field       USING 'LFA1-NAME1'
                                  itab-name1.
    PERFORM bdc_field       USING 'LFA1-SORTL'
                                  itab-sortl.
    PERFORM bdc_field       USING 'LFA1-LAND1'
                                  itab-land1.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0120'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFA1-KUNNR'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFBK-BANKN(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=ENTR'.
    cnt = 0.
    LOOP AT jtab WHERE j1 = itab-i1.
      cnt = cnt + 1.
      CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
      PERFORM bdc_field USING fdt jtab-banks.
      CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
      PERFORM bdc_field USING fdt jtab-bankl.
      CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
      PERFORM bdc_field   USING fdt jtab-bankn.
      IF cnt = 5.
        cnt = 0.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFBK-BANKS(01)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=P+'.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFBK-BANKN(02)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=ENTR'.
      ENDIF.
    ENDLOOP.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFBK-BANKS(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0210'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFB1-FDGRV'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'LFB1-AKONT'
                                  itab-akont.
    PERFORM bdc_field       USING 'LFB1-FDGRV'
                                  itab-fdgrv.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0215'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFB1-ZTERM'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0220'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFB5-MAHNA'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0310'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFM1-WAERS'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'LFM1-WAERS'
                                  itab-waers.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0320'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RF02K-LIFNR'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM bdc_dynpro      USING 'SAPLSPO1' '0300'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=YES'.
    PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Header file:
1     63190      0001     0001     0001     mr     bal188     b     in     31000     a1     inr
2     63191      0001     0001     0001     mr     bal189     b     in     31000     a1     inr
TC file:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
Regards,
Vasanth

Bank detials Maintained in Vendor master data with out Sort code / Bank Key

Hi
We have a Requirement of creating Japanese bank details in Vendor Master Record. But No Bank key / sort code is available.
Even for Russian Bank accounts we donu2019t have any bank key / sort code available from client.
System does not allow to create vendor bank details with out providing Sort code/ Bank key details.
Is there is any way of creating bank details in Vendor master data with out giving Bank key details.
Regards,
Karunakar.

Hi,
I assume you fill in Sort Code in bank number field.
In my company, our bank number is set not to duplicate bank key.
So bank key is simply a reference. And our bank number field is not mandatory.
If you follow these settings, you can create an abitrary bank key for your vendor bank account.

Credit master data for Customer

Hi,
I need solution for the below problem.
Credit master data for Customer "X" is not maintained.
Is there any possibility to get the information /Error message during sales order creation/Save for Customer "X" as Credit master data is not maintain.
Information/Error message shouldd be:No credit master data maintain for Customer "X"
Thanks for your help.
Regards,
Balaji.

Hi
You can use the followig user exit which will perform a check while saving the order.
Take the help of your abaper to write a code to check if the credit master has been maintained for the customer before saving the order.
Program,: MV45AFZZ
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
Regards
Madhu

Not able to create customer master data with country code US

Hey All,
I am not able to create customer master data in the Transaction Code XD01/FD01 with the country code as US.
The error message for the same is NO JURISDICTION CODE COULD BE DETERMINED. I have checked the tax code settings but could not locate the problem.
Request you to provide me with a solution.
Thanks & Regards
VK

Hey all,
I have checked the field in the account group(OBD2) but its in optional status
and also checked the country settings for US in the transaction code OY17 still the same error message, but when i tried checking the settings for a differnt company code's customer data base i can see that there is a number mentioned in the address tab under tax jurisdiction feild (beside time zone) which is not populating for this company code.
so, do anyone know where exaclty we mention this number so that it populates in that field of address.
hope am clear
hope to receive a solution
thanks & regards
vinila

Master data with text?

hi friends,
i created zcustomer now i loaded attributes data in master data tables
right click customer maintain master data , its showing.
i check with text also,
in 3.5 just i was creating extra excel sheet loaded text also ( 2 info packages 1 for att another for text)
in 7.0 i loaded attributes.
when i see my data ist zcustomer with attributes 2 loumns are free like text and description
now i need create another datasource , should i create any characters for this like text and description? to load text data?

Hi,
check the following thread, its very explanative:
Need help to load data in data target in BI7 version.

How to load master data with text into infoObject in BI 7.0

Hi all;
I have an infoobject 0employee ( this is for employee number ,8 character long), with medium text option.
I would like to load Employee name as a text option for employee number.
How do I load this mater data into this 0employee object,
Please help.
I did look for something similar in the forum and there are many of them, but I couldn't find anything that for BI 7.0 and really clear help for me. Sorry to ask a question that been asked before.
thanks.
Raiine

hi rainnie,
check this link t oload master data in BI 7
Re: BI 7.0 flat File extraction
as you are using SAP defined infoobject you can start from the creation of datasource.
text format for the flat file is
LANGUAGE,INFOOBJECT,TEXT
EN,0EMPLOYEE,RAINNIE
You have to create ,infopakage, transformation ,dtp for both the attribute and text.
hope this helps
cheers
Sunil

Loading Master Data with Flexible Update

Hi,
I have created an Infoobject - Business Partner (Master Data bearing characteristics). The attributes to this are Region, Sales Person, Industry code which are master bearing characteristic as well.
I need to load data to the business partner from a csv file.
The layout of the CSV file is -
BP number, BP text (long Text), Region Code, Region Desc (Med Text), Sales Person Code, Sales Person Desc (Med Text), Industry Code, Industry description (Med Text).
How do I define the infosource to load this data.
Appreciate any help with this.
Thank You,
Prashanth

Hi,
First of all, I need to note that there are two kind of Infosources: with direct and flexible update.
If you choose a direct IS, then in the creating of the IS you just enter the name of the infoobject where you are going to load data. The system will create a IS (comm. structure). Enter this IS for changing. The system will propose you the communication structure, click on a bottom icon Transfer structure/Transfer rules, choose as a Source system your flat file system. Agree with the system when it asks you to save assignments (up to 3 times). Activate TRs. Then click in the field for Datasource. You may see there another datasources (for texts, attributes and hierarchies). Choose one by one another datasources with their activation.
Now you can create an infopackage for a load you can choose what kind of package it is going to be for loading texts, attributes or hierarchies.
Note that in this case the structure of the flat file is proposed by the system and you need just prepare the flat file corresponding to the proposed structure (different for each of 3 possible datasources). Execute infopackage.
If you use a flexible IS, then you may insert into comm. structure the fields that you think you may need in the master data. Note that here you may have not only attributes but TEXTS also. Save a comm. structure. Assign a flat file source system and activate a TRs.
After that in RSA1-dataproviders tab right click insert IO as a data target choose your IO. Refresh the screen. Youll see up to three data targets. Create update rules for each of them. In URs map the fields in the IS with the fields in URs.
Best regards,
Eugene

Master Data With Custom Datasource.

Similar Messages

Maybe you are looking for