Masterdata text is missing .

Dear Friends
when i am doing reporting on the 0material Text for material is missing . so when i checked the maintain master for 0material . the text was missing where the language key was blank . after searching i found out that they are two languages one is ZH and other is EN . in ERP when they create a article they logon language was ZH , so in maintain master data i changed the Language key to ZH . then i was able to see the text . but when i keep EN or Blank the text is not apperiang .
So my question is how can i get the text for the EN or when blank also . so should i untick language Dependent in the infoobject . the user want language key to be blank . so when they do the reporting they should be able to see the text when launage isblank . Please provide me with solution this urjent . please do send your replies .
Thankyou

Hi,
Like you mention, you can either remove the language dependent component of your infoobject. In this case, language key in your source system will remain unmapped (since all your text is maintained in ZH lang, so I don't think this would be much issue).
Or in your transfer rules / transformation rules, you set 0langu to constant = 'EN'. So, the text maintaned in 'ZH' would be re-mapped to language = 'EN', which I assume is the default language for your BW setup.

Similar Messages

Text is missing in migo - excise invoice tab

Hi,
I'm doing migo with excise invoice tab option, where on the left, there are options like, capture & post, part1 only, no excise entry .etc..
In that area if i use F4 option, i can see both the fields i.e field nbr as 01 and text as capture and post, after selecting, the screen shows only 01 and text is missing.
pls suggest, how to get the short text in excise invoice tab.

Kunal
in our dev , it's working fine , but in prod. only we are geting such display. any idea?
Edited by: sapjj jk on Sep 22, 2008 7:12 AM
Edited by: sapjj jk on Sep 22, 2008 9:19 AM

Image text is missing in InDesign CS4

Hi everybody,
I am using InDesign CS4 with MAC OS X 10.5.8. I encountered a problem that the Text is missing in the eps image, when imported on InDesign document. Refer below screenshot.
I have used “Times New Roman” Type1 font in InDesign document. And for images I have used the same “Times New Roman” as OTF font. Refer below screenshots.
Type 1 fonts used in InDesign:
Open Type Font used in Images:
Here, I caught one more finding. If I save the image as Adobe Postscript as “Language Level 2”, I don’t have any text missing issue in InDesign document. But, if I save the image as “Language Level 3”, I found this missing text issue in the document. Refer below screenshots.
Could anyone hlep me what the exact issue. Any help is much appreciated!!

Yes Bob. This new thread was raised by me to explain the issue in detail.
Further to my analysis, I found that when I load the job fonts in “Applications/Adobe InDesign CS5/Fonts”, we got this text missing issue. And the same job fonts, when I load in “Users/<user_name>/Library/Fonts”, it showing correct.
Any thoughts?

Use of 'Subgroup text is missing' tab in ovt0/spro

Hi,
Can anybody please explain me what is the use of 'Subgroup text is missing' in tcode ovt0 . This tab is present in ECC 6.0 but not in 4.7.
The spro path for this is
sprosap referenceimglogistic generalbusinesspartner-customerscontroldefine account groups & field selection for    customers d.click on groupd. click on company code data-d.click on W/holding tax data, w/h tax 2----
'Subgroup text is missing'.
     Or else can anybody please provide me any info regarding the sap notes related to this .
Thanks in advance.
Edited by: Sakti Mishra on Oct 27, 2010 6:13 PM

Hi Sakti,
Kindly note that this error occurs when No fields are assigned to a group.
Therefore, with this clue you can check the corresponding table whether it contains the required field or not.
Also check the following SAP Note and see whether its releavnt in your case or not.
   62967 - Field status groups vendors (LSA)
Regards,
Abhishek

Saving as PDF from Photoshop Elemenst text is missing

I am saving a PSd as a PDF and the text is missing in the reader, but not in the original PSD, can anyone help?

Are you using adobe reader to view the pdf or the windows 8 built in pdf reader?
Is the text still there if you open the saved pdf back into the pse 10 editor using File>Open?

Some layer text are missing

i downoad free psd for logo website. when i want edit in photoshop. i just see the diaog box say some layer text contain are missing.
1. why my layer text photoshop missing?
2. where i can fine layer text to fix it?

Just substitute the missing font for one of the installed fonts. Or if you desperately want the text to look like your first saw it, hunt down the font and install it. There are various sites that help locate a particular font like Myfonts Identifont Whatfontis

Part of my text is missing in FF and IE..What to do?

This is the first time I have used Edge Animate....Seems pretty simple so far...I am finding it pretty simple so far.
I have created a simple line of text that fades in from left to right. In chrome, the HTML file looks great. I FF and IE, the last part of the line of text is missing!
Like I mentioned...I am a complete nebie.
Any thoughts or ideas are appreciated!
Thanks in advance!
Seth Hampton

Hey, Seth-
It's hard for us to tell what's going on without seeing the file. However, it's possible that your text is rendering slightly larger than your bounding box in FF and IE, and is getting clipped or is moving to the next line. If your text is within a symbol, the text will get clipped if you set the overflow to hidden.
Hope that gives you some ideas. If you want us to take a look at it, please post your file.
Thanks,
-Elaine

Menu text is missing in LibreOffice, what can I do?

All menu text is missing in Libreoffice Calc, including submenus. What should I do to make them appear again? When I take a screenshot with command "scrot", menu texts are visible on the image. I am using an NVidia FX5200, with "nouveau" driver.
Last edited by Bailando (2014-01-30 18:46:21)

Are you using a theme package such as "libreoffice-gnome" or "libreoffice-kde4"?
What window manager are you using? Are you using a compositor?
Is this problem only in Calc?

Different language of Query interface and masterdata texts

Hi Experts,
currently we are using BI system in 2 languages EN, DE. All queries are maintained in two languages. All text datasource are in two languages.
Now customer wants to have it also in Spanish. To load all texts via existing datasources in spanish would be easy.
But it's to difficult to maintain all queries in 3 languages (because next will be eg. Danish, Norwegian, etc...).
So I'm thinking about possibility to have Query itself - the interface (titles, names of characteristic, key figures etc.) in english and masterdata texts (eg. names of customers, materials etc.) in Spanish.
Do you think it's possible at all?
I tried URL parameters sap-language= and bsplanguage= to simulate it - English query with German masterdata texts, but without success
Thanks in advance
David

Hi Sven,
users can use (and currently they are mainly using) English reports. But people from Mexico would prefer Spanish.
And we don't want to allow them to create their own reports themselves
I thought it is not possible to have query report partly in one and partly in second language.
I have another idea - to allow also spanish language, but all texts of query (characteristics, key figures, titles, etc.) have in english version. For this it helps to have a way how to simple copy all these language dependent texts from EN version to spanish (eg. via some abap program or another way). And texts from text tables (eg. materials, customers, etc.) would remain spanish.
David

Has anyone experienced text going missing after using Change All in the Find Font dialogue box?

I manage an artwork production studio and two members of staff have separately reported that when using the Change All command to substitute fonts in InDesign's Find Font dialogue box, some text disappears from their documents. All affected text is originally set in the same font, and most of the conversion is fine but a few instances of text are actually removed (not reflowed). In the latest reported case, only four or five instances of text were 'deleted' across two pages of a 20pp document.
I've found a link that refers to the same issue but it's unresolved (http://www.listsearch.com/InDesign/Thread/index.lasso?20041#last)
I haven't been able to replicate this behaviour but would be interested to know if anyone else has experienced it and if so, under what circumstances it can occur, and what work-rounds or fixes are available.
Applies to InDesign CS3 and CS4, have not tested with CS5 because we haven't upgraded yet.

Joel, I am having the same problem you described. I have read of similar posts on PrintPlanet.com. Someone there thought it was a different text engine or something in CS4 which may be causing the problem.
I don't know what causes this but I believe it can be traced to a previously created file in CS3 is saved as a CS4 document.
The fonts associated with this problem for me are always Gill Sans, Palatino and some form of Helvetica. There may be others but these are the ones we notice the most.
Today I worked on an InDesign CS4 file. When I opened it I was given a missing font warning. I went to Find Font and it was different typefaces of Gill Sans that was missing. When I changed the missing font to Gill Sans Regular entire lines of text disappeared. I closed the document without saving it and reopened it. I did the same thing in replacing fonts. This time no text disappeared. Not reflowed; not white; not hidden—gone.
This is what I have been seeing for the past few months. The disappearing text is random and cannot be duplicated, though fonts may disappear in some other place. You never know where text will just disappear.
The workaround I have found is to export your file to an INX document and reopen it in CS3. You have to replace all missing text before saving it as INX, though. To my knowledge CS3 has never had this happen.
The workaround, though it works for me, is annoying. I'd like to know what to do to resolve this issue. What's the use in having CS4 if you can't trust it completely.
I use a Mac running 10.6.3. I also have running Suitcase Fusion 2.

Purchase Order Text Object missing in Transcation VOTXN

Hi Experts
I want Purchase Order Text Object in Transction VOTXN, for that Referring SAP Note 75144 - EKKO EKPO entries should be in table TFRM, if these two entries are missing, using the solution contained in Note 524453 to generate the missing entries in the table TFRM, run program RV80INCTFRM. I run that program too but still am not able to see purchase order text in Tcode VOTXN.
Please help me on this....

The note Note 524453 - Purchasing text determination is not transported mentions that you need to run program RV80HGEN after RV80INCTFRM. Did you run this program? What is your SAP version? Did you also check other notes provided in 524453?
Regards,

Some text goes missing in the PDF output after I convert FM8 book

Hi,
I am using Framemaker 8.0, Acrobat 8.0 Professional, Acrobat Distiller 8.0.
When I convert my Framemaker books to PDFs, some text (especially Table Heading tags) go missing in the PDF output. I have tried to change the font colour, change the cell shading, and many other options. But, the problem persists.
I saw some similar links on the forums with this kind of problems. For example,
http://support.microsoft.com/?id=952909
http://forums.adobe.com/message/3285145
http://forums.adobe.com/message/4167112
http://helpx.adobe.com/framemaker/kb/troubleshoot-pdf-creation-problems-framemaker.html
After going through these links from the forums, I realized that this is a known issue. But, the above links direct me to Microsoft patches and these patches are available only for Windows XP, Windows 2003 Server, and Windwos Vista operating systems. My operating system is Windows 7 Professional, 32-bit version.
One more thing I want to say is we have never faced this problem earlier. It started appearing now.
While I know that the world (many of us) moved on to Framemaker 9 and 10, I also know that there is someone out there to help me to overcome this issue.
Thanks and regards,
Raghavacharyulu NCB

Hi Harpreet,
Thanks for your response.
We tried this option also. In fact, the Distiller shows this option by default. Secondly, we have recently updated our old template to reflect the new corporate styles and we suspect something went wrong there. We once again took the old template and updated with the new colour definitions and fonts, this time very carefully and it started working. Now, the text is not missing.
So, the result is something is wrong with our template. Quite surprising is it is inconsistent and some places the text appears and some places it does not.
Where do you work? Are you in India?
Cheers,
NCB Raghavacharyulu
Mobile No. : 9845192336
E-mail : [email protected]

Flex 4 FTE Charts Legend text is missing/sporadic

I have enabled "Use Flash Text Engine in MX components" for my flex project.
The reason I want to do this is two fold:
1) I don't want to have to embed a font twice to just set embedAsCFF seperately for each.
2) The other reason is that FTE seems to handle unicode characters and I want to support that possibility even if my embedded font doesn't support it
The problem I am running into however is that the textual portion of charts and labels seem to sporadically show there values. For example when the page loads I may see 2 out of 3 legends textual values. The crazy part is that the legend values will just plain disappear/reappear sporadically while I am on the page. There doesn't seem to be any rhyme or reason on what ones will show up because I can load the application multiple times and different labels will show and others won't.
If I disable "Use Flash Text Engine in MX components" on my project then these labels show up fine but I loose the FTE needs stated above.
Any help would be greatly appreciated.

Well I am starting to believe that this is an actual bug now. I took Adobe's pie chart example from here and all I did was create a new project with it and enabled "Use Flash Text Engine in MX Components" in my compiler settings. I didn't even bother with adding an embedded font since the issue seems to occur without it in this simple example.
The first image shows how the legend is missing labels after loading the application. The second image is what happened after I moved my mouse over the larger portion of the pie chart, notice that some legend values disappeared. Also every time I load the application there will be different labels shown/missing so it appears to be completely random.
I made a simple fxg example of this but doesn't appear i can attach it to this post unfortunately.

Standard text printing missing on Smartform

Hi All,
I am using standard text in Smartform.
Standard text contains 'terms and conditions' hence it's used for printing in second page.
For printing standard text one window other than Main window has been created in second page.
Now when I am taking print preview of smartform only two pages are visible and on second page complete standard text is not displayed. As standard text is of two pages then rest missing text should come on third page as a continuity.
But missing standard text is not getting diplayed.
Any suggestion what shall we do to print complete standard text.
Regards,
Amit
Edited by: Amit Singh on Nov 25, 2010 11:38 AM
Edited by: Amit Singh on Nov 25, 2010 11:39 AM
Edited by: Amit Singh on Nov 25, 2010 11:39 AM

I tried to use the 2nd option provided by you but still this prolem is not resolved.
Missing Standard text is not going in a new page.
I tried to expand the window size and now entire text is coming in a single page. But by this way page window is not same as in a first page.
Is there any otherway to print the rest missing text in next page of the smartform.
Regards,
Amit

Text labels missing under Library and Viewer icons in V31

I just built a multi-folio app with DPS Pro Edition. I specified V31. When I preview the resulting Developer app on my iPad, the text under the small "Library" and "Viewer" icons at the bottom of the screen is missing. The Library and Viewer icons are there, but the space below the icon where the words "Library" and "Viewer" should appear is missing.
I didn't select "Use Customized Strings" or anything like that when I built the app in DPS App Builder. Any ideas?

Sent the details to your email. If you can:
Can you try to build a new app and see if the labels are missing?
If the app is for both ipad/iphone try to rebuild for ipad only?
Check the app builder version number?
Thanks

Masterdata text is missing .

Similar Messages

Maybe you are looking for