Material Division in Cross-Company Stock Transfer Order

We are configuring the cross-company code stock transfer order process.  We seem to have all configuration done, but on the PO and Delivery the division that shows up at the item level is the sales area common division, not the division on the material master.  Due to this, the business area is not being assigned correctly (Plant/Division), thus now allowing us to post the invoice.
Here are the specific Doc types we are using:
PO: NB
Delivery: NLCC
Delivery Item Cat: NLC
Invoice: IV
Any ideas as to how to get the division from the material master to show up on the PO and/or delivery so that's what pulls into the invoice?  We also understand the the default Sales Order type DL is set for Delivery Type NLCC in the event there is no Sales Order.  For Sales Order Type DL we have set the Item Division flag, but that is not working either.
Any ideas?
Thanks
Shane Newmyer

Hi buddi,
Thanks for the info, but neither of these things help with the division issue.  I need to have the material division on the PO, Del and Invoice...
Any other ideas?

Similar Messages

  • Issues on cross-company stock transfer triggered by sales order

    Hi, friends:
      As our business process required, we need to make the cross-company sale between to plants under two company codes.
      The business process required is different from standard inter-company billing in SAP SD module. Our business process is as follows:
       sales order --> PR --> PO --> cross-company stock transfer --> delivery to customer --> billing.
      However, there is a difficulty in this process of make-to-stock production method. When we use schedule line item in SO to trigger the PO, there is a must to assign "account assignment category" in PO. This indicator is unchangable in PO by manual. When post goods recepit against the PO, there is no stock quantity udpate in un-restricted stock. By the way,  I selected "C" in the "account assignment category" of schedule line item cofiguration.
      Checked the MM documents, I found it seemed like only two results of PGR against PO with account assignment category. One result of PGR is directly consumpted by receiptent or unloading point. The other result of PGR is updating sepecial stock. For example, I've fullfilled the process for make-to-order production method, the stocks are specified for sales order.
      In our requiremnt, we have to post to normal un-restricted stock for the following ATP in sales order.
      Could any friend give some suggestion on this issue?
      Thanks!
    Justin

    Hi, Venkadesh:
      I've checked the Purchasing view and quantity/value update in both plants of different company codes. That's correctly configured.
      In the business process, the quantity in normal un-restricted stock updating still doesn't work.
      Do you mean that as follows: if select any indicator in  "account assignment category", we have to use UNBW or NLAG material type in the purchase order?
      I have successfully fullfilled the process in make-to-order sales order, with material type FERT and account assignment category "E". The account assignmnet categroy is obligatory in sales order schedlue line item configuration, which is to trigger PO by SO. The configuration path is as below:
      IMG>Sales and Distribution>Sales>Sales Documents>Schedule Lines-->Define Schedule Line Categories
      If possible, would make a test in your system to check how to fullfill the process with make-to-stock sales order, FERT material?
      Thanks!
    Justin

  • Cross Company Stock Transfer- Please check excise base for the item is zero

    Hi,
    My scenario is Cross company Stock transfer (Two different Company Codes)
    I have done following steps :
    1.Create Purchase Order
    2.Create Outbound Delivery for Purchase Order
    3.Post Goods Issue for Delivery
    4.Creating Billing Document
    5.Creating Excise Invoice
    6.Printing of Excise Invoice
    7.Post Goods Receipt for Stock Transport Order
    Till MIGO there is no problem.
    I am getting a errro while doing MIGO with reference to Outbound Delivery, when I enter Excise Invoice created in sending plant, I am getting error as
    "Please check excise base for the item is zero" - Message no. 4F121
    Excise Duty values are flowing as per the excise invoice but system make base value as 0 , I have maintained Assesable value in J1ID also. We are using TAXINN.
    Pl. help
    Thanks
    Vikas

    Hi
    The best way to slolve this problem, Now is to maintain Assable value in Material Master For reciving Plant.
    Hear you can maintain all the chapter id, register A or C, etc
    and then try doing GR,
    The other way and the permanent solution is
    VPRS or equivalent
    Condition class B Prices
    Calculat.type C Quantity
    Condit.category  H
    Cond.control H Condition value fixed
    Condit.origin A Automatic pricing
    In this Condition category is most important and by this only system copies the base amount for excise duty calculation in MIGO or J1IEX.
    Regs
    Niti Narayan

  • Return back the stock in a cross company stock transfer environment

    Hi all,
    I have a question in reagrds to Standard SAP Stock transport order with SD and billing (i.e. cross company stock transfer)
    For example:
    Ordering plant (issue Stock transport PO)----
    > Supplying plant (create DO) -
    > Supplying Plant (PGI) -
    > Ordering Plant (GR) -
    > Supplying Plant (billing) -
    > Ordering plant (invoice verification)
    Now my question is...
    if the ordering plant want to return the stock back to the supplying plant due to some business reason, what does ordering and supplying need to do?
    Can the supplying plant now issue a stock transport PO to the ordering plant to buy back (i.e. get back) the stock? is this the right away? and if not what is the right way so that the financial posting can correctly take  place.
    regards
    YY

    Hi Buddy
    Please refer OSS note 430074
    Regards
    Yogesh

  • Billing pirce in the cross-company stock transfer

    Hi,
       We went to use the cross-company stock transfer to move our stock from one company to another, as we know price of the Intercompany billing copy from condition table.but we went the price copy from the transfer order(PO),How to do it?
    Lance

    Dear Lance,
    Go to copy controls of Billing doc., choose Tgt doc type and Source doc type, click on 'Item' in tree and choose "details", there u'll find a field by "Price Source" and can put that as "A" (PO). Hope this answers your question.
    Reward if it helps
    Samier Danish

  • How to control the goods receive in Cross-Company Stock Transfer process?

    Hi,
    we use the standard Cross-Company Stock Transfer process to transfer goods between company, we have a issue, for  example transfer order quantity(po) is 10 pc, devlivery order quantity is also 10 pc,but only issue 5pc.and then we use mb01 to receive goods.It can receive 10 pc!? is there anything wrong with my configuration?
    Regards,
    lance

    Hi,
    Can you explain WHY Cross-Company STO's can still be received by referencing the PO even if this has not been Goods Issued? 
    It has also occurred in our set up that the PO qty is 1000, GI was only 500, GR is also 500, but the remaining 500 can still be received even if it wasn't issued (referencing the PO).
    Regards,
    Lee

  • Three way match inter company Stock transfer orders

    Hello All ,
         For Inter company Stock transfer orders our client for is planning to copy the net value from the billing document to Invoice receipt and Good receipt. Having that said , the PO price will be different from good receipt and invoice receipt. What will it be having the effect on Three way match.
    Thanks in advance

    Thanks for the input . I have one more quick question
    At my client  PO condition Type  is  ZSTO and Billing Condition type is ZV01 , both value are maintained in table.
    One process they want to check where ZSTO is not equal to ZV01 as per example below.
    1 .P O Price  based on ZSTO = 450
    2. Good Issue (based on material standard   xyz)
    3. Billing document  based on ZV01 = 350  
    4.  Invoice receipt ?
    5.  Good receipt ?
    Can you please let me know what would be the IR Price and GR price and if the IR and GR value is 350 will it effect 3 way match .
    Thanks in Advance

  • Error in Cross Company Stock Transfer

    Dear Experts,
           While creating billing document for cross company stock transfer, it is not taking the material basic price and freight value.it is showing value 0.00, what might be the mistake. how do i correct that. kindly let me know plz.
    Regards,
    Prasath

    hi,
    even after i mantained that, it is not taking. then i have tried to maintain manually in condition tab. there if i press f4 and chekced for that condtion type. the gross price condtion is not coming there. but it is there in the procedure. i cant able to solve this. kindly let me know any other solution plz.
    prasath

  • Intra-Company & Inter-Company Stock Transfer Order

    Hi,
         what is the difference between Intra-Company & Inter-Company Stock Transfer Order...with configuration guide...
    thanks
      mohan

    Hai Mohan,
    STO is done mainly in two ways
    Intra company stock transfer means , stock transfer between two company code.
    Inter company stock transfer means , stock is moving in between two plants of same company code.
    Configuration steps for Inter company STO:
    1)you need to have  two plants assigned  to  two different company codes respectively,
    2)one is supplying plant another is recieving plant , material should be extended to both the plants (ie. maintain views for both the plants for the material in MM01  t. code )
    3)make sure the ordering plant and supplying plants are assigned to sales org and distri channel combination....in enter prise structure assignments)
    4) go to SPRO-->Material management > Purchasing>Purchase order-->set up Stock Tranfer order,
      >defone shipping data for plants
    >creating checking rule
    >define checking rule
    >assign delivery type and checking rule (with purchase order type NB , delivery type NLCC , checking rule B, (default order type in delivery type NLCC is DL )
    >assign document type, step procedure
    5) create a dummy vendor for ordering company by t. code xk01 and add delivering plant in the add prchasing data tab in xk02 , this vendor is the representation of supplying plant
    6)in the sales order type DL , by t. code vov8 , ensure billing type IV inter company billing, and in the billing doc  IV ensure pricing procedure is 'I ' and maintain inter company pricing procedure assigned properly, so that to bill the ordering plant /company by delivering company
    7) create STO by T.code ME21N (create purchase order) with purchase order type NB
    8) create delivery,  by t. code  VL10 B (purchase orders fast display) (select the line item, and click on back ground, then click on the item and log button, then click on the item and documents , then the delivery will be showned in display mode, convert it to change mode and do picking and PGI
    9) then do MIGO  ( with that STO no.)
    Regarding Intra company STO,
    the configuration is same as that of Inter company STO , except , the purchase order type is UB and delivery type is NLC
    and steps are the same ME21N , VL10B and MIGO
    Hope this helps you,
    Regards,
    GLN

  • Cross company stock transfer, in which table "stock in transfer CC"

    Dear Gurus,
    When I do cross company stock transfer, in which table quantity for "stock in transfer CC" will get updated?
    Rgds
    Sar

    Hi there
    Just with th report transaction MB5T
    I think your purpose will be solved using that report
    just check the flag cross company code in the initial screen
    *the qty gets updated in the table MSEG feild MENGE.*
    Reward if usefull
    Sujoy
    Edited by: SUJOY KUMAR PAL on Feb 15, 2008 6:07 AM

  • Cross-system stock transfer order (cross CC and without using APO)

    Dear experts,
    I want to set up a stock transfer order scenario cross two SAP systems (and cross company code).
    The examples given in SAP documentation point to scenarios using a joint APO system.
    At the same time the documentation reads:
    The number of process variants is a result of the combination of system landscapes and organizational units:
    - with or without joint SAP APO
    Does anyone in here have experience in setting up this scenarion without using APO system and could help me with a process flow and the IDOC sequence used for this?
    Thanks and regards
    Norbert

    Hi,
    and thanks for looking into this.
    No, I do not have an APO (company is using JDA/manugisitcs) and I want to set up cross system STO between two ECC 6.0 systems directly.
    I do have a number of idocs running between the systems already and also know the place where to configure a plant for cross system goods flow.
    What I would like to know is if this scenario is supported at all and if yes, what is the sequence of idocs and and what are their triggers (in other words - the technical side of the business process) .
    Best regards
    Norbert

  • Cross-company stock transfer with delivery function!

    Dear friends:
          I have a problem to borther u,I create stock transfer order with type 'NB',and then create delivery by T-CODE:VL10B with reference to the transfer order,but the log show the following error message:
       1030000484 000010 Sales unit  is not valid for item 000010
       Diagnosis
        The sales unit is not allowed for the material in item
        000010.
    System Response
        The system does not allow further processing of this item.
    Procedure
        Check your entry.
        Select a sales unit which is defined for the material in the
        material master record. Normally the sales unit will be
        determined immediately from the master master record.
    I really don't know how to deal it.
    thanks.

    UOM is in which stocks of the material are managed. The system converts all the quantities you enter in other units of measure to the base unit of measure.
    In the material master [MM02] check as to what is the base unit of measurement in the Sales Org1 tab and Purchasing tab. It seems that both these would be different as the system is not able to convert the UOM from Purchsing unit to the sales unit.
    Next, click the button for 'Additional data' [CTRL+F6], tab Unit of measure and enter the conversion for the UOM.
    For more details refer to the link below.
    <a href="http://help.sap.com/saphelp_46c/helpdata/en/ff/516a6749d811d182b80000e829fbfe/frameset.htm">UOM Details</a>
    In the link, follow the path Material Master Records-Additional Data-Units of measure.
    Regards,
    Gauravjit.
    Reward points if the solution is helpful

  • Cross-Company Stock Transfer with Delivery and Billing

    Hello Fellow Experts and Friends,
    I have a situation at a client in California. The client does Make-to-Order sales. The only materials kept in inventory are raw materials and NREs. This client has plants in several countries around the world but only two are on SAP. The current version is 4.6C.
    The scenario goes like this. The plant in China (CC: 2020, Plnt: 0020) wants to order raw materials from the US plant (CC: 1010, Plnt: 0010). If the US plant does not have enough stock in inventory, an order needs to be placed with a local vendor. When all materials a re available to ship,we need to deliver to and invoice the China plant. Additionally, shipment notification needs to be sent to the plant in China.
    IWould someone please be so kind as to helpme with a "Best Practice" process flow for Cross-Company STO with Delivery and Billing? I also need guidlines for customizing the process in the IMG. This process must include issuing a PO to a local vendor for ordering additional inventory. For the shipment notification, I was thinking of an EDI Advance Shipment Notice if the receiving plant uses EDI. I need a different option, If the receiving palnt does not use EDI.
    I am open to your suggestions.
    Thanks,
    AJ
    Edited by: Arthur Hawley on Sep 8, 2009 10:56 PM
    Edited by: Arthur Hawley on Sep 11, 2009 4:46 PM

    Arthur,
    Once this is correctly set up it works very, very well.  And the cross-company supply scenario is actually fairly simple, streamlined and automated.  However, this is NOT such a simple process to set up.
    True cross-company supply, all the way through, requires a LOT of configuration which ties in SD, MM, FI, and EDI.  It uses "wrap-around" IDocs to do some of the cross-posting in other company codes.  There is also the issue of Intercompany markups, as well as Intercompany eliminations.
    There are LOTS of folks who do the painful process of the FULL Order to Cash in one company code, and the full Purchase to Pay in the other.  But this is NOT the right solution and requires almost twice as much transaction processing.
    Just for the Intercompany setup, start to finish, I've been working on a "cookbook" to set up all of the modules for almost 10 years now.  I've done it several times, at several companies and it works very well once it is all in place.  However, that cookbook document is about 100 pages long (config settings, IMG settings, master data requirements, EDI settings, etc.).
    Also, in your scenario you are talking about multi-sourcing parts from other locations.  All of the related MRP settings are a separate setup issue.
    What you are asking is WAYYYYyyy beyond the scope of forum posting.  So if your company or client could use some help, please feel free to contact me.
    Bill Wood - President
    R3Now Consulting
    http://www.r3now.com SAP thought leadership!
    Platinum SAP Solutions
    (704) 905 - 5175
    http://www.linkedin.com/in/billwood

  • Division in Inter Company Stock Transfer

    Hi,
    when i am creating a inter company invoice , the division on the header of invoice is not the same as of material master. System always re determine the sales area to that single division only rreaspective of what i am invoiving.
    Regards
    Ankur

    Hi Ankur G,
                   To make it clear, just an example,
    In single sales order, there are various materials from different division. At sales doc type details we can set, which division has to take into consideration in sales order either customer master or item divsion, if both are different how system should react- this can be controlled in order type.
            where as in Billing One division will be considered  ( controlled through Invoice split criteria).
    Similarly all the IC sales / sto's can be processed only with respective to single sales area, it is assumed that all the IC Sto's processed under one sales channel & accounted accordingly.
    Hope it adds info.
    Reagards,
    ReazuddinMD

  • Inter Company Stock Transfer Order

    Hi,
    We have a requirment , where we will be transferring the stock between two companies. ie compnay code  The companies belong to the same client.  Can anyone give the process to be followed ie what is the firstr activity and so on.
    I had tried to gather information from the previous forum views but could not understand it clearly.
    Thanks,
    Vengal Rao.

    Hi,
    Follow Inter-company STO Process for this;
    1.Create a vendor for the company code of receiving plant, using account group :0007 using T-Code XK01.
    2. Assign this vendor to Delivering plant
    Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
    3. Create internal customer with the sales area of the vendor. Go To XD01
    4. In Pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
    5. Maintain condition records for the relevant pricing condition.
    6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
    7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
    8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
    Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
    9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
    Assign the document type NB to supplying plant and receiving plant
    10. After all settings , Create the STO using T-Code:ME21N and maintain pricing conditions of freight and Save.
    11. Create Delivery :VL10G
    Click on the Background Button after selecting line item
    A message is flashed : See log for information> next Click on Log for delivery creation Button >click on line item>click on document button to get Delivery document No
    12. Picking, PGI:VL02N
    13. Billing:VF01
    Save the document and its done
    14. J1IIN - Outgoing Excise Invoice
    15. MIGO - Goods Receipt against outbound Delivery
    16. J1IEX - Capture & Post Excise Invoice

Maybe you are looking for