Material master display Issue

Dear All ,
                                                                                I m display a material in MM03 , But an error thrown by system as below
"The material XXXXXXX does not exist or is not activated
Message no. M3305 "
Can ne one suggest what it means , either the material does not exists or it needs to be activated ?
All help will be appreciated .
sap11
Edited by: sap11 on Sep 3, 2009 3:29 PM

Hi,
It means that material is not created in the system or someone has defined the date to be used i.e active from to date in t.code MM13. And if u r getting this message for some particular view than it means view is not created for the material.So u have to create the view before displaying it.
Regards,
AM.

Similar Messages

  • MM03 Material master display F4 help is not available

    Dear All..
                    For one particular user MM03 Material master display F4 help is not available
    even i have press the push button on material text the help is not popup.
    Even authorization already exist  for that user material master display.
    Please give your suggestion on this.
    Regards
    Anand.

    HI Anand,
    I am going to assume that the problem is with F4 help in general, and not just with MM03.
    If you have only one user with the problem, then the best way to troubleshoot is to compare with another user who is not having the same problem (like yourself).
    First check Help settings for the user:  From any screen, select Help>Settings  select F4 tab.  Review the settings. Look for differences.  Make corrections.  Save.
    If you can find nothing amiss, then the GUI is probably the culprit.  Check to see if this user is on the same version and patch as the 'successful' users.  From SAPLOGON, select the tiny SAP icon from the blue bar, then select 'About SAP logon'.  Alternately, you can right clik on the SAPLOGON on the Windows taskbar and select 'About SAP Logon'. 
    There are known problems of bad interactions between certain Microsoft Software and certain patches of SAPGUI.  If any problems, download the latest GUI version and patch from SAP software distribution Center
    http://service.sap.com/swdc
    Select Download>Support packages and Patches>Entry by Application group
    Select SAP frontend components.
    Select the appropriate platform, then download the version that you need.
    If the user is on the same vers & patch as you, and you can't find any other problem, might be a good idea to reinstall the SAPGUI.
    Regards,
    DB49

  • Material Master- Display changes thr' Z-program

    Hi,
      I have created two custom fields in MM01, which appear as DISPLAY
    only fields.
    The value in these fields is populated depending on some another
    Z-field. This value is populated in database table thr' one Z-program.
    But reqmt is like, whenever the value is changed thr' Z-program,
    material master - Environment Menu>Display changes, should display the
    change history for that material.
    Can we use some 'CHANGEDOC*' function modules in Z-program so that it
    will record the user name , tcode, time and date in CDHDR table?
    If yes, what are those FM's and what should be the sequence for using
    those function modules?
    Thanks in advance,
    Prasad

    Hello,
    First you will have to go to the domain level and click a flag for change documents in attributes. Once you have done that you need to put those fields in the object for mara. For that you need to go to transaction SCDO. Find the the material object and add your fields there. Do not forget to regnerate teh program. Now once you have done that try to see if you are getting the change pointers if not then you will have to code to create the same using these
    <b>
    SCD0                           Change document creation                                     
    CHANGEDOCUMENT_CLOSE           Change document: Close change document creation              
    CHANGEDOCUMENT_INSERT_NUMBER                                                                
    CHANGEDOCUMENT_IS_GENERATED                                                                 
    CHANGEDOCUMENT_MULTIPLE_CASE   Change document: Create change document items (multiple case)
    CHANGEDOCUMENT_OPEN            Change document: Open change document creation               
    CHANGEDOCUMENT_PREPARE_TABLES  Change document: Edit tables for change document             
    CHANGEDOCUMENT_SINGLE_CASE     Change document: Create change document items (single case)  
    CHANGEDOCUMENT_TEXT_CASE       Change document: Create change document items (text case)    
    </b>

  • Material master upload issue

    Hi gurus,
    I want to upload material account assignment group in existing material master records. There are n no of material mater records.
    It has to be uploaded based on the valuation class.
    For each valuation class, a material acct assignment group is created. All materials are extended to 31 plants.
    While I try to upload using tcode mm17, I cant upload material acct assignment group using the valuation class since in valuation tab,acct assignment group is not present.
    Kindly help to sort out this issue.
    Regards,
    Vimal

    in MM17
    Select sales org Data for Material - table MVKE
    select valuation data for material - table MBEW
    Execute.
    Enter your selection (you can add further selections  e.g. valuation class field by clicking the button choose selection fields on the bottom.
    Execute.
    now you see all records to be changed.
    Click select fields. Pop-up is coming.
    Choose Account assignment group field and continue.
    Account assignment group field has appeared and you can now enter the new value .
    Click the colomn header of the field to be changed.
    Then click button change field values.
    You can see immediatly the new values in the records below.
    If you click save, then the new values are written to the database.

  • Material Master duplication issue

    hi,
    We are EPC company where we procure different kind of Pipes , flanges other erection materials for e.g.
    We have a large number of variations under these categories which is forcing us to create a new material master where tere is slight deviation .
    e.g. we have a 30" MS PIPE . But it can have dis 32",34".36",thickness 2", 4",6" , iner lining may be of teflon, glass...
    so there are large numbe rof combnation whic can happen. this end up in creating large numbe rof materials.
    Is there any way to minimise numbe rof materials in this?
    Also, we are facing issue of duplication of materials.
    For e.g. different Sites may ask for same material . so same material may be created with different description for different sites. Is there any way to standardise material description template?
    Thanks
    Manoj

    manoj.ltrm wrote:
    hi,
    >
    > We are EPC company where we procure different kind of Pipes , flanges other erection materials for e.g.
    >
    > We have a large number of variations under these categories which is forcing us to create a new material master where tere is slight deviation .
    >
    > e.g. we have a 30" MS PIPE . But it can have dis 32",34".36",thickness 2", 4",6" , iner lining may be of teflon, glass...
    > so there are large numbe rof combnation whic can happen. this end up in creating large numbe rof materials.
    >
    > Is there any way to minimise numbe rof materials in this?
    >
    >
    > Also, we are facing issue of duplication of materials.
    >
    > For e.g. different Sites may ask for same material . so same material may be created with different description for different sites. Is there any way to standardise material description template?
    >
    >
    > Thanks
    > Manoj
    Hi Manoj,
    The best way to deal with this scenario is to use "Configurable Materials".
    You need to create (variant configuration with class type 100, 200, 300) where you can define the variations in the material having same application and features such as yours.
    Go thru this thread..
    http://help.sap.com/saphelp_46c/helpdata/en/9f/fb79385feddf6ae10000009b38f8cf/content.htm
    Regards
    Shiva

  • Material Master Archiving Issue

    Hi,
    I have Issue with Material Master archiving. I got an error message" MARD:Reservation /Dependent  requirement exist.
    I have checked in MB24-Open reservations. All Reservations are closed. No stock existed. No Transfer requirements & No stock in transit.
    I ran MBVR also.
    How to solve thsi problem.
    Regards,
    Sridhar.

    Hi Sridhar,
    You may refer to note [900537 |https://websmp210.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=900537]for details:
    Error W4017 - Reservation/Dependent requirements exist:
    This message indicates that some reservations exist for the material you
    are trying to archive. You should be able to see the existing
    reservations using table RESB. Firstly, you must archive the document
    that caused the reservation to be created, for example Production Orders
    then you must archive the reservations themselves. Afterwards, it should
    be possible to archive the material.
    Note 30781 may assist if you identify that these requirements stem from
    purchase requisitions.
    Hope it helps.
    Thanks and regards,
    Polly

  • Material Master weight issue while packing

    Hi Frnds
    I have an issue with the incorrect weight calculation while packig the material in delivery.
    The business process requires the product to be sold in packs (5/10/25/50/100). The product is placed in a tray that holds these products which is a pre-packing step. Therefore the weight of the tray is included in the material master.
    But the wieght of the packs vary within themselves, the weight of a 10 pack tray will be diff then the weight of a 100 pack tray. Also it can be possible if a customer orders a 100 pack product the our shipping team may give him 2packs of 50 instead of one pack of 100. The weight variance is generally observed on lrge orders, when the acual weight is off XX lbs than the SAP calculated weight.
    How do i take the weigh of the tray into consideration when delivering different packs???

    hi
    u can go with pop1 instruction, where in u can specify whether the weight of the packaging material to be considererd or not can be specified.hope u can go with packaging instruction to solve ur issue.better consult with ur SD consultant.

  • LSMW- Material Master Performance issue

    Hi All,
    We are using the prgoram RMDATIND to upload material master through LSMW and having a problem of performance while using this technique.
    Have 4Lak records to be uploaded in 10 hrs as it required to upload all views.
    Pl advice except separate the records.Is that any option to run the file in parallal views?
    Regards,
    Asirvad

    I think best option is to break the file up into many chunks that can be processed in parallel. If this is not an option then you need to consider what is on the selection screen of RMDATIND, for example "Create change documents". Is this required for your purposes as this takes a lot of time.
    The other thing I would suggest is to talk to your basis team because there are settings and config they can put in place to aid this load.

  • Material Master block Issue

    Hi Experts
    I have a requirement to block the newly created materials from using in procurement or production until a BOM and Routing
    is created for the same.
    I tried applying a delete block after creating the material and thought that the same can be removed after creating BOM and Routing. But I realized that SAP doesn't allow creating BOM for a material with deletion flag.
    I am wondering if there is any way we can achieve this functionality. Appreciate any help.
    Thanks
    Srinivas

    Hi,
    You can block the material  at Client level  and at Plant level
    At Client Level  in MMR under Basic data screen  X-Plant Material Status
    At Plant level in MMR under purchasing screen Plant  Specific material status
    Regards
    AKM

  • Archiving issue in material master

    Hi
    I am trying to delete the material master through SARA t.code
    1.enter the  archiving object  MM_MATNR
    2. then click write button enter the varient name(zarc..)click maintain
         then enter the materials ...tick the radio button production mode..save the varent
    3.then come back click the starttime  click time immediatly
    4.come back click spool parameters
    5. then comeback click deletion button  then enter user name
    6. then click select archive files..her popupscreen displayed but there are no files.....
    i have faced issue thre ..so next step how can i proceed..pls guide me any one...
    when i am go to job overview ... my job ststus is finished and cancelled ..it has ahoes both status ...than i goto joblogs..error displas like ...........
    Virus scan profile /SARC/ARCHIVING_ADK does not exist
    Message no. VSCAN032
    Diagnosis
    The virus scan profile /SARC/ARCHIVING_ADK was requested, but is not entered in the configuration of the virus scan profiles.
    System Response
    The virus scan profile cannot be retrieved.
    Procedure for System Administration
    Check the configuration of the virus scan profiles.
    regards
    Sesidhar

    HI,
    ADK-based archiving relies on two main elements, which are used for the development and administration of archiving solutions: Archive Development Kit (ADK) and Archive Administration (transaction SARA).
    ADK and SARA are part of the standard SAP Web Application Server. ADK is the Application Programming Interface used by the applications to develop archiving solutions, while Archive Administration (transaction SARA) is used mainly by data archiving administrators to manage all tasks related to data archiving, including job scheduling and management, writing, reading and deletion of data, as well as Customizing.
    Pls check the link:http://help.sap.com/erp2005_ehp_03/helpdata/EN/ed/18cc38e6df4741a264bddcd4f98ae2/frameset.htm
    This issue is to be solved with the ABAP consultant, dealing with the Web based applicaitions...
    Regards
    Priyanka.P

  • Material Display Issue

    Hi All,
    I am Displaying a Material (1-W) using MM03, Getting error "Maintenance status of field MARA-/LGC/APO_DPIND,does not correspond to status of screen V". But, When I deselect the Sales Organisation View there is no error.
    Is Organisation Structure View is mendatory at the time of creation of material, PLease suggest the resolution of it. Is This error coming because of the functional settings done or Technical Consultant has to do some settings for it.
    We are Unable to create material because of this issue.
    Thanks,
    Vikas

    Hi
    I think somebody has done some changes to material master screen sequence.
    Check what screen sequence you are using in t.code OMT3E. In OMT3B for your screen sequence, in sales org view few fields have been assigned which has status K not V. You should identify that subscreen and remove it.
    Regards
    Antony

  • Issue In Material Master Creation.

    Hi All,
    We are migrating from ECC 5.0 to ECC 6.0.
    We have created a Test system  in 6.0 which is replica of our existing Production system in 5.0. I have checked relevant config settings everything is ok.
    While doing testing we observed following issues:
    1.) We are not able to Create Master Data which is Material Master, after entering all relevant information we are getting error: erro Log for the same says:                                                                               
    1.) E MG 144 : The field 'Care Code' is defined as a required field; it does not contain an entry MARA-CARE_CODE
    2.) The field 'GI Proc. Time' is defined as a required field; it does not contain an entry MARC-GI_PR_TIME
    3.) E MG 144 : The field 'Purchasing Across Purchasing Group' is defined as a required field; it does not contain an entry MARC-MULTIPLE
    Please sugest if there is any SAP Note we need to implement for this.
    thanks & regards,
    Prashant Rathore.

    Hi Prashant,
    the 'required'-state as well as the occurance of a field on a screen        
    can be customized. You should proceed as follows to resolve the issue:                                                                               
    1. Call transaction OMSR                                                                               
    2. Press the 'Field Name'-Button, enter a field there, for instance         
        MARA-CARE_CODE, and press enter. This will lead you to the           
       settings for that field.                                                                               
    3. Now press the button with the green arrow on the right to the field.     
       By this, yopu reached the screen where field selection can be            
       maintained, the decision whether the field should be required            
       is customized.                                                                               
    4. The above list is the list of fields which are customized together,      
       as a field selection group. The below list defines whether the field     
       is required. If you dont use that field at all, it should be             
       sufficient to take care that for no field reference, 'entry required'    
       is switched on.                                                                               
    5. Now proceed the same for the other fields, which have not been in        
       the same field selection group.                                          
    Regards,
    Mauro
    Edited by: Mauro Bianchi on Jul 23, 2010 3:44 PM

  • Issue in LSMW for material master using standard input program RMDATIND!!

    Hello guys,
    I have a issue in LSMW for material master.
    I have a custom field in MARA table. which I want to add in my LSMW.
    I added the field in BMMH1 structure. I'm passing the value to this field, But it is not populated in the table when I run it.
    Is there anything else I need to do apart from addition of field in the structure BMMH1.
    Thanks in advance for your help.
    Regards,
    Sumeet....

    see oss note 44410, it gives you a step by step overview.
    https://service.sap.com/sap/support/notes/44410

  • Costing Issue-Previous Price changes in Accounting 1 tab in Material Master

    Hi SAP Experts,
    Our Client has an issue with "previous price" field under the "Accounting 1" tab in Mateial master .The issue is that client never did costing to this material XXXXXXwith plant XXXX. But system is showing value in the "previous price" field. We have checked whether previious cost estimate exists. There was no previous cost estimate and still the system updated "previous price" field.
    Can anyone let me know in which cases the system updates "Previous Price" field in Material Master ?
    Your help is highly appreciated.
    Kind Regards,
    K.S.K

    Hi
    May be this material was created with reference to the same material in other plant or with ref to some other material or may be costing run was deleted from CKR1
    br, Ajay M

  • Report to display material master data changes

    Hi,
    Is there a standard report available to display all changes to material master data over a specified time frame i.e all changes made alst week,all chnages made today.
    Please suggest.
    Thanks in advance.

    Hi!
    Appart from MM04, you can also have a look at MM03 or MM02:
    1. Goto MM02 or MM03 transactions and enter the material.
    2. Select the relevant views for which you want to have the details.
         In the Bar menu follow the path Environment -> Display changes.
    Here you will get the list of changes done to the fields with Old and
    New values.
    Appart from these two tools, there is not any other report provided in the standard for this target.
    I hope this helps!
    Esther.

Maybe you are looking for