Material master upload-Batch input method

I am trying to extend sales view.When i try to upload,the system is thrwing error msg
* 172 You have not fully maintained the tax classifications*
The field is TAXKM,but this field not availbale in the field mapping.How to map this field & upload the tax
Tax classification material

Hi,
Use Standard Batch/Direct Input method.
Here you can use BMMH2 structure where the field TAXKM will be populated.
Regards,
Amol

Similar Messages

LSMW for material master using Batch input recording method

Dears,
I am using Batch input recording method to upload material master data. But while selecting views , I need to scroll to select the vies lets say Plant storage loc view. While scrolling and selecting ,views are not recorded propelry . That is when I run in foreground system selects only basic data and purchasing views but the plant data views are not selected(palnt data views are selected by scrolling while recording).
How to resolve this issue.
Pls help
Regards
Kamesh

HI,
, I need to scroll to select the vies lets say Plant storage loc view. While scrolling and selecting ,views are not recorded propelry
Don,t scroll use Page down button from key Bord
like select Basis view and then press page down button from key board ,then you will get next view now select it
Regards
Kailas Ugale

About material master data batch input

hello
 i wrote a batch input for material master data. but it can't work ,i can't use it to create material.hope someone help me!thanks.code is below.
report z_mat_batchinput no standard page heading
 line-size 255 message-id YB.
 mat batch input
include bdcrecx1.
include .
tables: mara,marm,MARC,MARD,T134,NRIV,T006A,T023,T001W,T001L,
 TVKO,TVTW,T025,TTGR,TLGR,TVKWZ,T006.
data: DIMID like t006-DIMID.
data: flag, K, tmp.
DATA: X TYPE I.
************ÉÏÔØÎÄ¼þÄÚ±í************************
data: begin of record occurs 0,
 MATNR(018), " ÎïÁÏºÅ
 MTART(004), " ÎïÁÏÀàÐÍ
**generaldata1**
 MAKTX(040), " ÎïÁÏÃèÊö
 EAKTX(040), " Ó¢ÎÄÃèÊö
 MEINS(003), " »ù±¾¼ÆÁ¿µ¥Î»
 MATKL(009), " ÎïÁÏ×é
 BISMT(018), " ¾ÉÎïÁÏºÅ
 EXTWG(018), " Íâ²¿ÎïÁÏ×é
 SPART(002), " ²¿ÃÅ
 MTPOS_MARA(004), " ÆÕÍ¨ÏîÄ¿Àà±ð×é
 BRGEW(017), " Ã«ÖØ
 GEWEI(003), " ÖØÁ¿µ¥Î»
 NTGEW(017), " ¾»ÖØ
 VOLUM(017), " Ìå»ý
 VOLEH(003), " Ìå»ýµ¥Î»
 GROES(032), " Á¿¸Ù
 MAGRV(004), " ÎïÁÏ×éµÄ°ü×°Îï
**generaldata2**
 NORMT(018), " ¹¤Òµ±ê×¼ÃèÊö
 FERTH(018), " ÀàÐÍ
 WRKST(048), " ¹æ¸ñ
**generaldata1**
 EAN11(018), " ²úÆ·±íÊ¶Âë
**generaldata2**
 ZEIAR(003), " ÎÄµµÀàÐÍ£¬ºÏÀí´¢±¸ÖÜ×ªÆÚ
 WERKS(004), " ¹¤³§
 VKORG(004), " ÏúÊÛ×éÖ¯
 VTWEG(002), " ·ÖÏúÇþµÀ
**salesorg 1**
 VRKME(003), " ÏúÊÛµ¥Î»
 VMREN(006), " ÏúÊÛµ¥Î»×ª»»Òò×Ó
 VMREZ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
 SPART(002), " ²úÆ·×é
 DWERK(004), " ½»»õ¹¤³§
 TAXKM(001), " ÎïÁÏË°·ÖÀà
**salesorg 2**
 KONDM(002), " ÎïÁÏ¶¨¼Û×é
 KTGRM(002), " ¿ÆÄ¿ÉèÖÃ×é
 MVGR1(003), " ÎïÁÏ×é 1
 MVGR2(003), " ÎïÁÏ×é 2
 MTPOS(004), " ÏîÄ¿Àà±ð×é
 VERSG(001), " ÎïÁÏÍ³¼Æ×é
**ÏúÊÛ£ºÒ»°ã/¹¤³§Êý¾Ý**
 MTVFP(002), " ¿ÉÓÃÐÔ¼ì²é
 XCHPF(001), " Åú´Î¹ÜÀí
 YCHPF(001), " ÅúÁ¿¹ÜÀí
 TRAGR(004), " ÔËÊä×é
 ladgr(004), " ×°ÔØ×é
**pur**
 BSTME(003), " ¶©µ¥µ¥Î»
 UMREZ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
 UMREN(006), " ¶©µ¥µ¥Î»×ª»»Òò×Ó
 WEBAZ(003), " ÊÕ»õ´¦ÀíÊ±¼ä
 EKGRP(003), " ²É¹º×é
 LGORT(004), " ¿â´æµØ
**Ò»°ã¹¤³§Êý¾Ý/²Ö´¢1**
 AUSME(003), " ·¢»õµ¥Î»
 UMREJ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
 UMREF(006), " ·¢»õµ¥Î»×ª»»Òò×Ó
 XCHPF(001), " ÅúÁ¿¹ÜÀí
**MRP 1**
 DISGR(004), " MRP×é
 DISMM(002), " MRPÀàÐÍ
 FXHOR(003), " ¼Æ»®µÄÊ±½ì
 DISPO(003), " MRP¿ØÖÆÕß
 DISLS(002), " ÅúÁ¿
 MAABC(001), " ABC±êÊ¶
 BSTFE(018), " ¹Ì¶¨ÅúÁ¿´óÐ¡
**MRP 2**
 RESKZ(001), " »ñÈ¡ÀàÐÍ
 BESKZ(001), " ²É¹ºÀàÐÍ
 SOBSL(002), " ÌØÊâ²É¹ºÀà
 LGPRO(004), " ·¢»õ²Ö´¢µØµã
 RGEKZ(001), " ·´³å
 PLIFZ(003), " ¼Æ»®½»»õÊ±¼ä
 VEBAZ(003), " ÊÕ»õ´¦ÀíÊ±¼ä
 DZEIT(008), "×ÔÖÆÉú²ú
 FHORI(003), " ¼Æ»®±ß¼ÊÂë
 EISBE(018), " °²È«¿â´æ
**MRP 3**
 PERKZ(001), " ÆÚ¼ä±êÊ¶
 STRGR(002), " ²ßÂÔ×é
 VRMOD(001), " ÏûºÄÄ£Ê½
 VINT1(003), " ÄæÏòÏûºÄÆÚ¼ä
 VINT2(003), " ÏòÇ°ÏûºÄÆÚ¼ä
 NTVFP(002), " ¿ÉÓÃÐÔ¼ì²é
**MRP 4**
 SAUFT(001), " ÖØ¸´ÖÆÔì±êÖ¾
 SFEPR(004), " ÖØ¸´Éú²ú²ÎÊýÎÄ¼þ
**¹¤×÷¼Æ»®**
 FEVOR(003), " Éú²úµ÷¶ÈÔ±
 FRTME(003), " Éú²úµ¥Î»
 SMREZ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
 SMREN(006), " Éú²úµ¥Î»×ª»»Òò×Ó
 UEETK(001), " ÎÞÏÞÖÆ¹ýÁ¿½»»õ
**»á¼Æ 1**
 BKLAS(004), " ÆÀ¹ÀÀà
 BWTTY(001), " ¹À¼Û·ÖÀà
 VPRSV(001), " ¼Û¸ñ¿ØÖÆ
 PEINH(006), " ¼Û¸ñµ¥Î»
 VERPR(015), " ÒÆ¶¯Æ½¾ù¼Û
 STPRS(015), " ±ê×¼¼Û
**»á¼Æ 2**
 BWPRH(014), " ÉÌÒµ¼Û¸ñ 1
**³É±¾ 1**
 LOSGR(018), " ÅúÁ¿³É±¾ºËËã
**³É±¾ 2**
 ZPLP1(014), " ¼Æ»®¼Û¸ñ 1
 ZPLD1(010), " ¼Æ»®ÈÕÆÚ 1
**qm**
 ART1(8), "¼ìÑéÀàÐÍ1
 AKTIV1(1), "ÒÑ¼¤»î
 QMPUR(1), "¼¤»î²É¹ºÖÐµÄ QM
 SSQSS(8), "QM ¿ØÖÆÂë¡¢
 QMATV(8), "QM¼ìÑéÉèÖÃ
 ART2(8), "¼ìÑéÀàÐÍ2
 AKTIV2(6), "ÒÑ¼¤»î
 ART3(8), "¼ìÑéÀàÐÍ3
 AKTIV3(6), "ÒÑ¼¤»î
 end of record.
************ÏÂÔØ¸ñÊ½/´íÎóÎÄ¼þÄÚ±í**************
data: begin of record1 occurs 0,
 MATNR(018), " ÎïÁÏºÅ
 MTART(008), " ÎïÁÏÀàÐÍ
**»ù±¾Êý¾Ý1**
 MAKTX(040), " ÎïÁÏÃèÊö
 EAKTX(040), " Ó¢ÎÄÃèÊö
 MEINS(013), " »ù±¾¼ÆÁ¿µ¥Î»
 MATKL(009), " ÎïÁÏ×é
 BISMT(018), " ¾ÉÎïÁÏºÅ
 EXTWG(018), " Íâ²¿ÎïÁÏ×é
 SPART(002), " ²¿ÃÅ
 MTPOS_MARA(004), " ÆÕÍ¨ÏîÄ¿Àà±ð×é
 BRGEW(017), " Ã«ÖØ
 GEWEI(008), " ÖØÁ¿µ¥Î»
 NTGEW(017), " ¾»ÖØ
 VOLUM(017), " Ìå»ý
 VOLEH(008), " Ìå»ýµ¥Î»
 GROES(032), " Á¿¸Ù
 MAGRV(014), " ÎïÁÏ×éµÄ°ü×°Îï
**»ù±¾Êý¾Ý2**
 NORMT(018), " ¹¤Òµ±ê×¼ÃèÊö
 FERTH(018), " ÀàÐÍ
 WRKST(048), " ¹æ¸ñ
**»ù±¾Êý¾Ý1**
 EAN11(018), " ²úÆ·±íÊ¶Âë
**»ù±¾Êý¾Ý2**
 ZEIAR(003), " ÎÄµµÀàÐÍ£¬ºÏÀí´¢±¸ÖÜ×ªÆÚ
 WERKS(004), " ¹¤³§
 VKORG(008), " ÏúÊÛ×éÖ¯
 VTWEG(008), " ·ÖÏúÇþµÀ
**ÏúÊÛ×éÖ¯ 1**
 VRKME(003), " ÏúÊÛµ¥Î»
 VMREN(006), " ÏúÊÛµ¥Î»×ª»»Òò×Ó
 VMREZ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
 SPART(006), " ²úÆ·×é
 DWERK(008), " ½»»õ¹¤³§
 TAXKM(010), " ÎïÁÏË°·ÖÀà
**ÏúÊÛ×éÖ¯ 2**
 KONDM(010), " ÎïÁÏ¶¨¼Û×é
 KTGRM(010), " ¿ÆÄ¿ÉèÖÃ×é
 MVGR1(003), " ÎïÁÏ×é 1
 MVGR2(003), " ÎïÁÏ×é 2
 MTPOS(010), " ÏîÄ¿Àà±ð×é
 VERSG(001), " ÎïÁÏÍ³¼Æ×é
**ÏúÊÛ£ºÒ»°ã/¹¤³§Êý¾Ý**
 MTVFP(010), " ¿ÉÓÃÐÔ¼ì²é
 XCHPF(008), " Åú´Î¹ÜÀí
 YCHPF(001), " ÅúÁ¿¹ÜÀí
 TRAGR(006), " ÔËÊä×é
 ladgr(006), " ×°ÔØ×é
**²É¹º**
 BSTME(003), " ¶©µ¥µ¥Î»
 UMREZ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
 UMREN(006), " ¶©µ¥µ¥Î»×ª»»Òò×Ó
 WEBAZ(003), " ÊÕ»õ´¦ÀíÊ±¼ä
 EKGRP(006), " ²É¹º×é
 LGORT(004), " ¿â´æµØ
**Ò»°ã¹¤³§Êý¾Ý/²Ö´¢1**
 AUSME(003), " ·¢»õµ¥Î»
 UMREJ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
 UMREF(006), " ·¢»õµ¥Î»×ª»»Òò×Ó
 XCHPF(001), " ÅúÁ¿¹ÜÀí
**MRP 1**
 DISGR(004), " MRP×é
 DISMM(009), " MRPÀàÐÍ
 FXHOR(003), " ¼Æ»®µÄÊ±½ì
 DISPO(011), " MRP¿ØÖÆÕß
 DISLS(004), " ÅúÁ¿
 MAABC(007), " ABC±êÊ¶
 BSTFE(018), " ¹Ì¶¨ÅúÁ¿´óÐ¡
**MRP 2**
 RESKZ(001), " »ñÈ¡ÀàÐÍ
 BESKZ(008), " ²É¹ºÀàÐÍ
 SOBSL(002), " ÌØÊâ²É¹ºÀà
 LGPRO(004), " ·¢»õ²Ö´¢µØµã
 RGEKZ(001), " ·´³å
 PLIFZ(012), " ¼Æ»®½»»õÊ±¼ä
 VEBAZ(003), " ÊÕ»õ´¦ÀíÊ±¼ä
 DZEIT(008), "×ÔÖÆÉú²ú
 FHORI(010), " ¼Æ»®±ß¼ÊÂë
 EISBE(018), " °²È«¿â´æ
**MRP 3**
 PERKZ(008), " ÆÚ¼ä±êÊ¶
 STRGR(006), " ²ßÂÔ×é
 VRMOD(001), " ÏûºÄÄ£Ê½
 VINT1(003), " ÄæÏòÏûºÄÆÚ¼ä
 VINT2(003), " ÏòÇ°ÏûºÄÆÚ¼ä
 NTVFP(010), " ¿ÉÓÃÐÔ¼ì²é
**MRP 4**
 SAUFT(001), " ÖØ¸´ÖÆÔì±êÖ¾
 SFEPR(004), " ÖØ¸´Éú²ú²ÎÊýÎÄ¼þ
**¹¤×÷¼Æ»®**
 FEVOR(003), " Éú²úµ÷¶ÈÔ±
 FRTME(003), " Éú²úµ¥Î»
 SMREZ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
 SMREN(006), " Éú²úµ¥Î»×ª»»Òò×Ó
 UEETK(001), " ÎÞÏÞÖÆ¹ýÁ¿½»»õ
**»á¼Æ 1**
 BKLAS(006), " ÆÀ¹ÀÀà
 BWTTY(001), " ¹À¼Û·ÖÀà
 VPRSV(008), " ¼Û¸ñ¿ØÖÆ
 PEINH(008), " ¼Û¸ñµ¥Î»
 VERPR(015), " ÒÆ¶¯Æ½¾ù¼Û
 STPRS(015), " ±ê×¼¼Û
**»á¼Æ 2**
 BWPRH(014), " ÉÌÒµ¼Û¸ñ 1
**³É±¾ 1**
 LOSGR(018), " ÅúÁ¿³É±¾ºËËã
**³É±¾ 2**
 ZPLP1(014), " ¼Æ»®¼Û¸ñ 1
 ZPLD1(010), " ¼Æ»®ÈÕÆÚ 1
**ÖÊÁ¿¹ÜÀí**
 ART1(8), "¼ìÑéÀàÐÍ1
 AKTIV1(6), "ÒÑ¼¤»î
 QMPUR(010), "¼¤»î²É¹ºÖÐµÄ QM
 SSQSS(8), "QM ¿ØÖÆÂë¡¢
 QMATV(8), "QM¼ìÑéÉèÖÃ
 ART2(8), "¼ìÑéÀàÐÍ2
 AKTIV2(6), "ÒÑ¼¤»î
 ART3(8), "¼ìÑéÀàÐÍ3
 AKTIV3(6), "ÒÑ¼¤»î
 end of record1.
selection-screen begin of block 0 with frame title text-001.
selection-screen begin of line .
selection-screen position 1.
parameters: test like rkec1-test .
selection-screen
comment 3(4) text-004 for field test.
selection-screen position 26.
parameters: oldfile like rlgrap-filename.
selection-screen
comment 9(17) text-003 for field oldfile.
selection-screen: end of line.
selection-screen begin of line.
selection-screen position 1.
parameters: dnldflag like rkec1-test default 'X'.
selection-screen
comment 3(4) text-005 for field dnldflag.
selection-screen position 26.
parameters: outfile like rlgrap-filename .
selection-screen
comment 9(17) text-006 for field outfile.
selection-screen: end of line.
selection-screen end of block 0 .
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE TEXT-002.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: GEN1 LIKE RKEC1-TEST.
selection-screen
comment 3(9) text-007 for field GEN1.
selection-screen position 26.
PARAMETERS: GEN2 LIKE RKEC1-TEST.
selection-screen
comment 28(9) text-008 for field GEN2.
selection-screen end of line.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: SALORG1 LIKE RKEC1-TEST.
selection-screen
comment 3(21) text-009 for field SALORG1.
selection-screen position 26.
PARAMETERS: SALORG2 LIKE RKEC1-TEST.
selection-screen
comment 28(21) text-010 for field SALORG2.
selection-screen position 51.
PARAMETERS: SALPLANT LIKE RKEC1-TEST.
selection-screen
comment 53(19) text-011 for field SALPLANT.
selection-screen end of line.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: PURCHASE LIKE RKEC1-TEST.
selection-screen
comment 3(21) text-012 for field PURCHASE.
selection-screen position 26.
PARAMETERS: PLTSTRG1 LIKE RKEC1-TEST.
selection-screen
comment 28(21) text-018 for field PLTSTRG1.
selection-screen end of line.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: MRP1 LIKE RKEC1-TEST.
selection-screen
comment 3(4) text-013 for field MRP1.
selection-screen position 13.
PARAMETERS: MRP2 LIKE RKEC1-TEST.
selection-screen
comment 15(4) text-014 for field MRP2.
selection-screen position 26.
PARAMETERS: MRP3 LIKE RKEC1-TEST.
selection-screen
comment 28(4) text-015 for field MRP3.
selection-screen position 37.
PARAMETERS: MRP4 LIKE RKEC1-TEST.
selection-screen
comment 39(4) text-016 for field MRP4.
selection-screen position 51.
PARAMETERS: PLANTSTR LIKE RKEC1-TEST.
selection-screen
comment 53(8) text-017 for field PLANTSTR.
selection-screen end of line.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: QAU LIKE RKEC1-TEST.
selection-screen
comment 3(8) text-023 for field QAU.
selection-screen position 13.
PARAMETERS: ACC1 LIKE RKEC1-TEST.
selection-screen
comment 15(5) text-019 for field ACC1.
selection-screen position 26.
PARAMETERS: ACC2 LIKE RKEC1-TEST.
selection-screen
comment 28(5) text-020 for field ACC2.
selection-screen position 37.
PARAMETERS: COR1 LIKE RKEC1-TEST.
selection-screen
comment 39(5) text-021 for field COR1.
selection-screen position 51.
PARAMETERS: COR2 LIKE RKEC1-TEST.
selection-screen
comment 53(5) text-022 for field COR2.
selection-screen end of line.
SELECTION-SCREEN END OF BLOCK 1.
at selection-screen on value-request for oldfile.
call function 'KD_GET_FILENAME_ON_F4'
 EXPORTING
 mask = ',ÎÄ±¾ÎÄ¼þ(ÖÆ±í·û·Ö¸ô),*.txt'
 static = 'X'
 CHANGING
 file_name = oldfile.
at selection-screen on value-request for outfile.
call function 'KD_GET_FILENAME_ON_F4'
 EXPORTING
 mask = ',Microsoft Excel¹¤×÷²¾,*.xls'
 static = 'X'
 CHANGING
 file_name = outfile.
initialization.
******µÃµ½ÎÄ¼þÄ¿Â¼*******
call function 'WS_QUERY'
 EXPORTING
 query = 'CD'
 IMPORTING
 return = outfile.
if sy-subrc <> 0.
 message e005 with outfile.
endif.
oldfile = outfile.
concatenate outfile 'mat_fat' into outfile.
*ÅúÊäÈëÄ¬ÈÏÃû³Æ
group = 'MATBATCHIN'.
start-of-selection.
if dnldflag eq 'X' and not ( outfile is initial ).
 perform download_data.
 stop.
endif.
perform upload_data.
if test = ' '.
*ÊÓÍ¼²ÎÊý¼ì²é
 IF ( GEN1 NE 'X' AND GEN2 NE 'X' AND SALORG1 NE 'X'
 AND SALORG2 NE 'X' AND SALPLANT NE 'X'
 AND PURCHASE NE 'X' AND PLTSTRG1 NE 'X'
 AND MRP1 NE 'X' AND MRP2 NE 'X' AND MRP3 NE 'X'
 AND MRP4 NE 'X' AND PLANTSTR NE 'X'
 AND ACC1 NE 'X' AND ACC2 NE 'X'
 AND COR1 NE 'X' AND COR2 NE 'X' and qau ne 'X' ) .
 MESSAGE E000 WITH 'ÇëÑ¡ÔñÐèÎ¬»¤ÊÓÍ¼'.
 ENDIF.
 perform open_group.
 SORT RECORD BY WERKS MATNR.
 loop at record.
 perform bdc_fill.
 perform bdc_transaction using 'MM01'.
 clear: bdcdata.
 refresh: bdcdata.
 endloop.
 perform close_group.
else.
 perform file_check.
endif.
end-of-selection.
*& Form UPLOAD_DATA
 ÉÏÔØÅúÊäÈëÊý¾Ý
--> p1 text
<-- p2 text
form upload_data.
call function 'WS_UPLOAD'
 EXPORTING
 filename = oldfile
 filetype = 'DAT'
 TABLES
 data_tab = record
 EXCEPTIONS
 conversion_error = 1
 file_open_error = 2
 file_read_error = 3
 invalid_table_width = 4
 invalid_type = 5
 no_batch = 6
 unknown_error = 7
 gui_refuse_filetransfer = 8
 customer_error = 9
 others = 10.
if sy-subrc <> 0.
 message E000 with 'ÇëÊäÈëÉÏÔØÎÄ¼þ'.
endif.
read table record with key MATNR = '**'.
if sy-tabix lt 1.
 message E000 with 'ÉÏÔØÎÄ¼þÎÄ¼þÍ·ÓëÊý¾ÝÖ®¼äÎÞ**'.
endif.
delete record from 1 to sy-tabix.
endform. " UPLOAD_DATA
*& Form BDC_FILL
 ÅúÊäÈë
--> p1 text
<-- p2 text
form bdc_fill.
data: N type I,
 M type I,
 S_MATNR(018),
 test(1) type N.
PERFORM BDC_FILL_INITALSCR. "³õÊ¼ÆÁÄ»
tmp = '0'.
condense record-matnr no-gaps.
test = record-matnr(1).
if test <> ''.
 M = STRLEN( RECORD-MATNR ).
 M = 18 - M.
 DO M TIMES.
 CONCATENATE '0' RECORD-MATNR INTO S_MATNR.
 RECORD-MATNR = S_MATNR.
 ENDDO.
endif.
**ÅÐ¶ÏÎïÁÏ»ù±¾ÊÓÍ¼ÊÇ·ñÒÑ¾±»Î¬»¤¹ý**
SELECT SINGLE * FROM MARA WHERE MATNR = RECORD-MATNR.
IF SY-SUBRC NE 0.
 K = '0'.
Else.
 condense MARA-PSTAT no-gaps.
 N = strlen( mara-pstat ).
 M = 0.
 record-meins = mara-meins.
 do N times.
 K = MARA-PSTAT+M.
 IF K = 'K'.
 EXIT.
 ENDIF.
 M = M + 1.
 enddo.
ENDIF.
IF ( ( GEN1 EQ 'X' OR GEN2 EQ 'X' ) AND SALORG1 NE 'X'
 AND SALORG2 NE 'X' AND SALPLANT NE 'X'
 AND PURCHASE NE 'X' AND PLTSTRG1 NE 'X'
 AND MRP1 NE 'X' AND MRP2 NE 'X' AND MRP3 NE 'X'
 AND MRP4 NE 'X' AND PLANTSTR NE 'X'
 AND ACC1 NE 'X' AND ACC2 NE 'X'
 AND COR1 NE 'X' AND COR2 NE 'X' and qau ne 'X' ) .
 IF K EQ 'K'.
 perform bdc_dynpro using 'SAPLMGMM' '0070'.
 perform bdc_field using 'BDC_CURSOR'
 'MSICHTAUSW-DYTXT(15)'.
 perform bdc_field using 'BDC_OKCODE'
 '/N'.
 ELSE.
 PERFORM BDC_FILL_CHOICEVIEW. "Ñ¡ÔñÊÓÍ¼
 ENDIF.
ELSE.
 PERFORM BDC_FILL_CHOICEVIEW. "Ñ¡ÔñÊÓÍ¼
 PERFORM BDC_FILL_ORGVIEW. "×éÖ¯¼¶±ð
ENDIF.
TRANSLATE record-MEINS TO UPPER CASE.
TRANSLATE record-BSTME TO UPPER CASE.
TRANSLATE record-VRKME TO UPPER CASE.
TRANSLATE record-FRTME TO UPPER CASE.
TRANSLATE record-AUSME TO UPPER CASE.
if gen1 eq 'X'.
 IF K NE 'K'.
 PERFORM GENERALDATA1.
 ENDIF.
endif.
if gen2 eq 'X'.
 IF K NE 'K'.
 perform generaldata2.
 ENDIF.
endif.
if salorg1 eq 'X'.
 perform salorg1.
endif.
if salorg2 eq 'X'.
 perform salorg2.
endif.
if salplant eq 'X'.
 perform salplant.
endif.
if purchase eq 'X'.
 perform purchasedata.
endif.
if mrp1 eq 'X'.
 perform MRP1.
endif.
if mrp2 eq 'X'.
 perform MRP2.
endif.
if mrp3 eq 'X'.
 perform MRP3.
endif.
if mrp4 eq 'X'.
 perform MRP4.
endif.
if PLANTSTR eq 'X'.
 perform PLANTSTR.
endif.
if PLTSTRG1 eq 'X'.
 perform PLTSTRG1.
endif.
if qau eq 'X'.
 perform qualitydata.
endif.
if ACC1 eq 'X'.
 perform ACC1DATA.
endif.
if ACC2 eq 'X'.
 perform ACC2DATA.
endif.
if COR1 eq 'X'.
 perform COR1DATA.
endif.
if COR2 eq 'X'.
 perform COR2DATA.
endif.
perform BDC_SAVE.
endform. " BDC_FILL
*& Form GENERALDATA1
 Ò»°ãÊý¾Ý 1
--> p1 text
<-- p2 text
form generaldata1.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
 "'=ZU01'.
 '/00'.
perform bdc_field using 'MAKT-MAKTX'
 record-MAKTX. " ÎïÁÏÃèÊö
perform bdc_field using 'MARA-MEINS'
 record-MEINS. " »ù±¾¼ÆÁ¿µ¥Î»
perform bdc_field using 'MARA-MATKL'
 record-MATKL. " ÎïÁÏ×é
perform bdc_field using 'MARA-BISMT'
 record-BISMT.
perform bdc_field using 'MARA-EXTWG'
 record-EXTWG.
perform bdc_field using 'MARA-SPART'
 record-SPART.
perform bdc_field using 'MARA-MTPOS_MARA'
 record-MTPOS_MARA.
perform bdc_field using 'BDC_CURSOR'
 'MARA-GROES'.
perform bdc_field using 'MARA-BRGEW'
 record-BRGEW.
if record-gewei = '' and ( salorg1 = 'X' or salorg2 = 'X'
 or salplant = 'X' ).
 perform bdc_field using 'MARA-GEWEI'
 'KG'. " ÖØÁ¿µ¥Î»
else.
 perform bdc_field using 'MARA-GEWEI'
 record-GEWEI. " ÖØÁ¿µ¥Î»
endif.
perform bdc_field using 'MARA-NTGEW'
 record-NTGEW.
perform bdc_field using 'MARA-VOLUM'
 record-VOLUM.
perform bdc_field using 'MARA-VOLEH'
 record-VOLEH.
perform bdc_field using 'MARA-GROES'
 record-GROES.
condense record-EAN11 no-gaps.
if record-EAN11 <> ''.
 perform bdc_field using 'MARA-EAN11'
 record-EAN11.
 perform bdc_field using 'MARA-NUMTP'
 'HT'.
endif.
perform bdc_field using 'MARA-MAGRV'
 record-MAGRV.
perform bdc_dynpro using 'SAPLMGMM' '4300'.
perform bdc_field using 'BDC_OKCODE'
 '=ZU02'.
condense record-EAKTX no-gaps.
if record-EAKTX <> ''.
 perform bdc_field using 'SKTEXT-SPRAS(2)'
 'EN'.
 perform bdc_field using 'SKTEXT-MAKTX(2)'
 record-EAKTX.
endif.
perform bdc_dynpro using 'SAPLMGMM' '4300'.
perform bdc_field using 'BDC_OKCODE'
 '=MAIN'.
if record-meins <> 'PAK'.
 perform bdc_field using 'SMEINH-UMREN(05)'
 '1'.
 perform bdc_field using 'SMEINH-MEINH(05)'
 'PAK'.
 perform bdc_field using 'SMEINH-UMREZ(05)'
 '1'.
endif.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
endform. " GENERALDATA
*& Form generaldata2
 Ò»°ãÊý¾Ý 2
--> p1 text
<-- p2 text
FORM generaldata2.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'MAKT-MAKTX'
 record-MAKTX.
perform bdc_field using 'BDC_CURSOR'
 'MARA-NORMT'.
condense record-ferth no-gaps.
if record-ferth <> ''.
 perform bdc_field using 'MARA-FERTH'
 record-FERTH.
endif.
perform bdc_field using 'MARA-NORMT'
 record-NORMT.
perform bdc_field using 'MARA-WRKST'
 record-WRKST.
perform bdc_field using 'MARA-ZEIAR'
 record-ZEIAR.
ENDFORM. " generaldata2
*& Form salorg1
 ÏúÊÛ×éÖ¯ 1
--> p1 text
<-- p2 text
FORM salorg1.
condense RECORD-SPART no-gaps.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
PERFORM BDC_FIELD USING 'MAKT-MAKTX'
 RECORD-MAKTX. " ÎïÁÏÃèÊö
IF K NE 'K'.
 perform bdc_field using 'MARA-MEINS'
 record-MEINS. " »ù±¾¼ÆÁ¿µ¥Î»
ENDIF.
perform bdc_field using 'MARA-SPART'
 record-SPART. " ²úÆ·×é
perform bdc_field using 'MVKE-DWERK'
 record-DWERK. " ½»»õ¹¤³§
PERFORM BDC_FIELD USING 'MG03STEUER-TAXKM(01)'
 RECORD-TAXKM. " ÎïÁÏË°·ÖÀà
condense RECORD-VRKME no-gaps.
IF RECORD-MEINS <> RECORD-VRKME and RECORD-VRKME <> ''.
 perform bdc_field using 'MVKE-VRKME'
 record-VRKME. " ÏúÊÛµ¥Î»
 select single * from MARM where matnr = record-matnr
 and meinh = record-vrkme.
 if SY-SUBRC NE 0.
 tmp = 'W'.
 select single * from t006 where MSEHI = record-meins.
 if t006-DIMID = 'AAAADL'.
 DIMID = ''.
 else.
 DIMID = t006-DIMID.
 endif.
 select single * from t006 where MSEHI = record-vrkme.
 if dimid <> t006-DIMID.
 PERFORM BDC_DYNPRO USING 'SAPLMGMM' '0510'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=ENTR'.
 perform bdc_field using 'RMMZU-UMREN'
 record-VMREN. "ÏúÊÛµ¥Î»×ª»»Òò×Ó
 perform bdc_field using 'RMMZU-UMREZ'
 record-VMREZ. "»ù±¾µ¥Î»×ª»»Òò×Ó
 PERFORM BDC_DYNPRO USING 'SAPLMGMM' '4000'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
 endif.
 endif.
ENDIF.
perform bdc_dynpro using 'SAPLMGMM' '4200'.
perform bdc_field using 'BDC_OKCODE' " µ÷ÓÃË°Àà×ÓÆÁÄ»
 '/00'.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' " ·µ»ØÏúÊÛ×éÖ¯ 1ÆÁÄ»
 '/00'.
ENDFORM. " salorg1
*& Form salorg2
 ÏúÊÛ×éÖ¯ 2
--> p1 text
<-- p2 text
FORM salorg2.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'MVKE-KTGRM'.
PERFORM BDC_FIELD USING 'MVKE-VERSG'
 RECORD-VERSG. " ÎïÁÏÍ³¼Æ×é
PERFORM BDC_FIELD USING 'MVKE-KTGRM'
 RECORD-KTGRM. " ¿ÆÄ¿ÉèÖÃ×é
PERFORM BDC_FIELD USING 'MVKE-KONDM'
 RECORD-KONDM. " ÎïÁÏ¶¨¼Û×é
perform bdc_field using 'MVKE-MTPOS'
 RECORD-MTPOS. " ÏîÄ¿Àà±ð×é
PERFORM BDC_FIELD USING 'MVKE-MVGR1'
 RECORD-MVGR1. " ÎïÁÏ×é 1
PERFORM BDC_FIELD USING 'MVKE-MVGR2'
 RECORD-MVGR2. " ÎïÁÏ×é 2
ENDFORM. " salorg2
*& Form salplant
 ÏúÊÛ£ºÒ»°ã/¹¤³§Êý¾Ý
--> p1 text
<-- p2 text
FORM salplant.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
select single * from marc where matnr = record-matnr
 and werks = record-werks.
if SY-SUBRC NE 0 OR MARC-MTVFP = ''.
 PERFORM BDC_FIELD USING 'MARC-MTVFP'
 RECORD-MTVFP. " ¿ÉÓÃÐÔ¼ì²é
endif.
PERFORM BDC_FIELD USING 'MARA-TRAGR'
 RECORD-TRAGR. " ÔËÊä×é
PERFORM BDC_FIELD USING 'MARC-LADGR'
 RECORD-LADGR. " ×°ÔØ×é
perform bdc_field using 'MARC-XCHPF'
 record-XCHPF. " ÅúÁ¿¹ÜÀí
ENDFORM. " salplant
*& Form PURCHASEDATA
 ²É¹ºÊý¾Ý
--> p1 text
<-- p2 text
form purchasedata.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'BDC_CURSOR'
 'MARC-WEBAZ'.
perform bdc_field using 'MAKT-MAKTX'
 record-MAKTX.
IF K NE 'K'.
 perform bdc_field using 'MARA-MEINS'
 record-MEINS. " »ù±¾¼ÆÁ¿µ¥Î»
 perform bdc_field using 'MARA-MATKL'
 record-MATKL. " ÎïÁÏ×é
ENDIF.
condense RECORD-BSTME no-gaps.
IF RECORD-MEINS <> RECORD-BSTME and RECORD-BSTME <> ''.
 perform bdc_field using 'MARA-BSTME'
 record-BSTME. " ¶©µ¥µ¥Î»
 select single * from MARM where matnr = record-matnr
 and meinh = record-bstme.
 if SY-SUBRC NE 0 and
 ( record-vrkme <> record-bstme or tmp <> 'W' ).
 tmp = 'W'.
 select single * from t006 where MSEHI = record-meins.
 if t006-DIMID = 'AAAADL'.
 DIMID = ''.
 else.
 DIMID = t006-DIMID.
 endif.
 select single * from t006 where MSEHI = record-bstme.
 if dimid <> t006-DIMID.
 PERFORM BDC_DYNPRO USING 'SAPLMGMM' '0510'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=ENTR'.
 perform bdc_field using 'RMMZU-UMREN'
 record-UMREN. "¶©µ¥µ¥Î»×ª»»Òò×Ó
 perform bdc_field using 'RMMZU-UMREZ'
 record-UMREZ. "»ù±¾µ¥Î»×ª»»Òò×Ó
 PERFORM BDC_DYNPRO USING 'SAPLMGMM' '4000'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
 endif.
 endif.
ENDIF.
perform bdc_field using 'MARC-EKGRP'
 record-EKGRP. " ²É¹º×é
perform bdc_field using 'MARC-WEBAZ'
 record-WEBAZ. " ÊÕ»õ´¦ÀíÊ±¼ä
endform. " PURCHASEDATA
*& Form MRP1
 text
--> p1 text
<-- p2 text
FORM MRP1.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'MAKT-MAKTX'
 record-MAKTX. " ÎïÁÏÃèÊö
IF K NE 'K'.
 perform bdc_field using 'MARA-MEINS'
 record-MEINS. " »ù±¾µ¥Î»
ENDIF.
perform bdc_field using 'MARC-DISGR'
 record-DISGR. " MRP×é
perform bdc_field using 'MARC-MAABC'
 record-MAABC. " ABC±êÊ¶
perform bdc_field using 'MARC-DISMM'
 record-DISMM. " MRPÀàÐÍ
perform bdc_field using 'MARC-FXHOR'
 record-FXHOR. " ¼Æ»®µÄÊ±½ì
perform bdc_field using 'MARC-DISPO'
 record-DISPO. " MRP¿ØÖÆÕß
perform bdc_field using 'MARC-DISLS'
 record-DISLS. " ÅúÁ¿
perform bdc_field using 'MARC-BSTFE'


Here is a sample program which creates a material with the bare minmal fields, this will get you started.
report zrich_0003 .
data: headdata type bapimathead.
data: clientdata type bapi_mara.
data: clientdatax type bapi_marax.
data: descdata type table of BAPI_MAKT with header line.
data: return type bapiret2 .
data: returnm type table of bapi_matreturn2 with header line.
data: xmara type mara.
parameters: p_matnr type mara-matnr.
headdata-material = p_matnr.
headdata-ind_sector = 'M'.
headdata-matl_type = 'FERT'.
headdata-basic_view = 'X'.
clientdata-BASE_UOM = 'EA'.
clientdatax-BASE_UOM = 'X'.
clientdata-old_mat_no = 'Old Material'.
clientdatax-old_mat_no = 'X'.
clientdata-division = '00'.
clientdatax-division = 'X'.
descdata-LANGU = sy-langu.
descdata-MATL_DESC = 'This is the description'.
append descdata.
call function 'BAPI_MATERIAL_SAVEDATA'
exporting
 headdata = headdata
 clientdata = clientdata
 clientdatax = clientdatax
* PLANTDATA =
* PLANTDATAX =
* FORECASTPARAMETERS =
* FORECASTPARAMETERSX =
* PLANNINGDATA =
* PLANNINGDATAX =
* STORAGELOCATIONDATA =
* STORAGELOCATIONDATAX =
* VALUATIONDATA =
* VALUATIONDATAX =
* WAREHOUSENUMBERDATA =
* WAREHOUSENUMBERDATAX =
* SALESDATA =
* SALESDATAX =
* STORAGETYPEDATA =
* STORAGETYPEDATAX =
importing
 return = return
tables
 MATERIALDESCRIPTION = descdata
* UNITSOFMEASURE =
* UNITSOFMEASUREX =
* INTERNATIONALARTNOS =
* MATERIALLONGTEXT =
* TAXCLASSIFICATIONS =
 returnmessages = returnm
* PRTDATA =
* PRTDATAX =
* EXTENSIONIN =
* EXTENSIONINX =
check sy-subrc = 0.
Regards,
Rich Heilman

What is the standard program for Material Master upload using LSMW

Dear All
I am trying to use the MM upload using DATMIG_INF4. I want to know what are the different standard projects that are used for Material master upload.

Hi Amol,
You can load the material master using direct input method in LSMW ,details of which are as follows:
Object               0020   Material master
Method               0000
Program name         RMDATIND
Program type         D   Direct input
Please revert back in case of any doubt.
Cheers
VJ

Help me for material master upload by using Direct Input method

Hi All,
Can any one help me out for developing Material Master Upload program by using Direct Input Method where we are also submitting the report to upload the data in SAP Database.

Thanks in Advance!
Ramkumar.K

Hi Kumar,
Thanks! I am using submit statement in my program as well but its populating all the views like Sales Organization Data, Sales - General / Plant Data, Accounting, and all the other views except the Basic Data View.. Eventhough i have populated the corresponding fields of the same.
I am also using structure BGR00, BMM00, BMMH1 to upload the data
Can you please help me on this..

Regards,
Ramkumar.K

Problem in batch input method

Hi wizards,
please help me for the following problem:
I have created a parent recording for MATERIAL MASTER in LSMW batch input method by selecting all of the fields that may be required for different material types. Now I want to edit the recording and create new recordings from the parent one for specific material types. For this, i have made a copy of the same recording with a different name in the same project. In the copied recording, i have kept only the screen fields which i require for a particular material type and deleted the rest. I have created new structure relationships and field mapping rules for the new recording. Now when i upload the data, system is behaving normally upto the DISPLAY READ DATA stage, but gives a short dump on CONVERT DATA. On inspection i have found that during FIELD MAPPING, the _source field mapping is still showing mapping with the source structure of the parent recording for fields which have mapping rule as "Transfer" but it is picking up the new source structure for those source fields for which mapping rule is "Constant"_.
Kindly help me solve this problem as i do not want to create a separate recording for each material type. Can creating a new subproject help in this regard?
Thanks and regards
Abhik

Hi Harris,
could you please let me know how to use the two methods you have mentioned? If you have any docs regarding the same then could you please mail it to me at [email protected]? Or else if you have any link for the same then please do send it to me.
However, I would like to know that if separate recording is required for every material type, then why the "COPY RECORDING" and "DELETE SCREENFIELD" utilities have been provided.
Thanks and regards
Abhik

Material master upload -lsmw

Hai guys,
I want to upload material using lsmw for material master.i am following all the steps in the lsmw. i am using the batch input method for uploading.If the sales unit is different from the unit of measure..i will be getting the conversions data like numerator and denominator fields.
i am getting the same fields if the issue unit is also different.so i couldnt able to map it correctly with the conversion fields..this repeating fields are not captured in the recording for the target fields.
so i couldnt able to map it.please help me to solve this problem..
with regards,
sathish..

Hi,
Please close this duplicate thread..
Thanks,
Naren

I have encountered a peculiar problem in MM01 material master upload.

I have encountered a peculiar problem in MM01 material master upload. The
BDC program uploads data using Session method. The problem is when i
process the session in foreground mode the data uploads successfully, but
when i process it in background mode it gives the following errors in the
log.
'Control Framework: Fatal error - GUI cannot be reached'.
'Runtime error RAISE_EXCEPTION has occurred'.
When i debugged the program i found that this error is encountered when
data is being input in 'Purchase Order text' editor of MM01 transaction.
There is no problem with the BDC recording or the program as i could see.
The only problem what i believe is the system is unable to call the text
editor for inputting purchase order text data in background mode.

Hi
Try uploading a BAPI it would be better
http://www.saptechies.com/mm01-upload-using-bapi/
Regards
Shiva

PO creation using LSMW through batch input method

Hi, I am new to working with LSMW and i have completed a project for creating purchase orders using the direct data input method. I need to do the same using batch input method, however in the maintain structure relationship step, it is only allowing me to assign one structure to the recording that i have done, however in po creation we need separate (nested) structure for header and line item, could anybody help me past this please?

Hi Rudra!
OK, now you just know, why you have only one line, not multiple PO item lines. To get a dynamic number of items, you need a complex program - just like standard direct input.
If you need a field, which is not part of this program, don't try to write your own program for batch input - it's just to much work before you have a good result.
You can use Bapi method instead with BAPI_PO_CREATE1. This can handle a lot of fields and there is some documentation available how to fill the Bapi.
If this looks to complicated in the first moment, think about creation of POs via direct input and a small batch recording to change your additional field(s) afterwards. (You can select EKPO table to generate list of 'wrong' migrated orders for input in LSMW.) Use field 'Item' in the bottom of ME22 to position your desired line in first screen line, just change one PO-line after one other (every time a 'save' -> no problem with different number of lines / PO).
Regards,
Christian

Material master Upload with LSMW

Hi
When I make Material master Upload with LSMW, I could not find any entry in planning file.
Please explain.

Mayuresh,
Not all LSMW transactions properly update Planning file.
You can run transaction MDAB to set up planning file in Background
You can run transaction MDRE to detect and correct Planning file inconsistancies in Background.
It is probably a good idea to run these jobs periodically, say, weekly, in most production environments.
Regards,
DB49

LSMW for Vendor Master using Batch Input/Direct

Hi Folk,
I'm trying to create a LSMW for Vendor Master using Batch Input/Direct Input and in the step Create Batch Inout Session a error message appears:
Trans. 1 XK01: Acct already exists; general area not being processed.
Can somebody help me with this...........

Hi,
Check manually create vendor. Check with recording steps means strucutre creadred while you choose BDC recording option. With same data r u able to create vendor.
Regards
Md.MahaboobKhan

Material Master upload Programe

Hi anybody,
I developed Material master upload programe in ABAP. Material is uploaded. but more than 18 characters materials is upload upto 18 characters last character is "!".
Ex: SET SCREW M12X50MM L - I want upload this material.
But SAP takes automatically like SET SCREW M12X50M! 18 th character is "!" symbol.
how do i resolve this problem. I want upload more than 18 characters.
anybody please tell me this issue.
Tks,
S.Muthu.

what are you talking about material code or material discription
rgds
Rajesh

Physical inventory With the help of Batch input method

Dear all;
Can anyone tell me the procedure of Physical inventory procedure with batch input method ?
kindly Give me the step .
Thanking you;
Regarsds;
Joydeep mukherjee

Hi,
Go through this following code,
selection-screen begin of block B2 with frame title TEXT-005.
selection-screen begin of line.
parameters:     P_BIRPT type C radiobutton group RAD1 default 'X' user-command UCOMM.
selection-screen comment 3(20) TEXT-002 for field P_BIRPT.
selection-screen end of line.
selection-screen begin of line.
parameters:     P_COLRPT type C radiobutton group RAD1.
selection-screen comment 3(20) TEXT-003 for field P_COLRPT.
selection-screen end of line.
selection-screen begin of line.
parameters:     P_PAYRPT type C radiobutton group RAD1.
selection-screen comment 3(20) TEXT-004 for field P_PAYRPT.
selection-screen end of line.
selection-screen end   of block B2.
selection-screen begin of block B1 with frame title TEXT-001.
select-options: SO_KTOKD for KNA1-KTOKD modif id M4,
          SO_BLART for BSIS-BLART modif id M2.
parameters:     P_PAID   type ZCLEAR     modif id M3 as listbox visible length 20.
selection-screen end   of block B1.
at selection-screen output.
loop at screen.
    if P_BIRPT eq 'X'.
      if SCREEN-GROUP1   = 'M2' or SCREEN-GROUP1 = 'M3' .
        SCREEN-INVISIBLE = '1'.
        SCREEN-ACTIVE    = '0'.
        modify screen.
      endif.
    elseif P_COLRPT eq 'X'.
      if SCREEN-GROUP1   = 'M3'.
        SCREEN-INVISIBLE = '1'.
        SCREEN-ACTIVE    = '0'.
        modify screen.
      endif.
    elseif P_PAYRPT eq 'X'.
      if SCREEN-GROUP1   = 'M2'.
        SCREEN-INVISIBLE = '1'.
        SCREEN-ACTIVE    = '0'.
        modify screen.
      endif.
      if SCREEN-GROUP1   = 'M4'.
        SCREEN-INVISIBLE = '1'.
        SCREEN-ACTIVE    = '0'.
        modify screen.
      endif.
    endif.
endloop.
Thanks
Anil D

Criteria to use batch input method in lsmw

in lsmw we hav batch input method,direct input,idocs,bapis,what is the criteria to use them?

     Decide whether it makes sense to use this tool with respect to the data volume to be transferred. It may be easier to transfer very small data volumes into the SAP system manually. In the case of a very large data volume, batch input or IDoc techniques may cause extremely long runtimes. A rough landmark for estimating the required time: 10 000 records per hour where this value may vary considerably depending on the hardware available.
     Identify the transaction(s) in the SAP system via which you want to import the data into your SAP system. It may be relevant whether you need the data for statistical analysis or for further processing in the system.
     Run the relevant transaction in the SAP system manually with test data from the legacy system and see which fields must be filled. There may be required fields that do not correspond to data fields in the legacy system. In such a case, you should better assign a fixed value or establish an optional field for data transfer.
santhosh

Problem with Material Master upload

Hi All,
I want to know what the file MTVFP( Group Check Availability) filed gonna do in material master upload bapi "BAPI_MATERIAL_SAVEDATA". When i am trying to upload data i am getting the following error "The field MARC-MTVFP/BAPI_MARC-AVAILCHECK is defined as a required field; it does not contain an entry".
Thanks

Hello Ben ,
I am getting the same error , could you please let me know how you got it solved.
Comradely ,
K.Sibi

Material master upload-Batch input method

Similar Messages

Maybe you are looking for