Material PO text in Material Master upload
Hello,
I want to upload the Material Master and want to upload the Material PO text field as well How do i upload this field. I cant find any technical name of the field nor any field in the object while uploading thru LSMW ? Kindly respond.
Thanks,
Shehryar Dahar
Hi
see this
Re: upload longtext from excel file
REPORT zupload_excel_to_itab.
TYPE-POOLS: truxs.
PARAMETERS: p_file TYPE rlgrap-filename.
TYPES: BEGIN OF t_datatab,
col1(30) TYPE c,
col2(30) TYPE c,
col3(30) TYPE c,
END OF t_datatab.
DATA: it_datatab type standard table of t_datatab,
wa_datatab type t_datatab.
DATA: it_raw TYPE truxs_t_text_data.
At selection screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
*START-OF-SELECTION.
START-OF-SELECTION.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw " WORK TABLE
i_filename = p_file
TABLES
i_tab_converted_data = it_datatab[] "ACTUAL DATA
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
END-OF-SELECTION.
END-OF-SELECTION.
LOOP AT it_datatab INTO wa_datatab.
WRITE:/ wa_datatab-col1,
wa_datatab-col2,
wa_datatab-col3.
ENDLOOP.
http://www.sapdevelopment.co.uk/file/file_upexcel.htm
Reward if useful
Regards
Anji
Similar Messages
-
How to upload PO text of material master ?
dear gurus,
how to upload PO text in material master in mass , can i use LSMW or BDC ? if yes then how?
I have done the recording but LSMW is not working for PO text.
Upesh khairnar.Hi!
try using Purchasing Inforecord for this. in here you maintain master data linkage for Material Master and Vendor Master. You will just have to input the Material Number, the Vendor Account, and the Purchasing Org. In here you can maintain the PO text defaulted per Material Number. After the maintenance of Inforecord, the PO text will be reflected on the PO document.
Here is the ff Transaction Code:
- ME11 (Create Inforecord)
- ME12 (Change Inforecord)
- ME13 (Display Inforecord)
Hope this helps, Thank you.
Mik -
Uploading sales text and Purchase order text for material master
Hi,
I have created, material master with LSMW byt not updated SALES TEXT and Purchase order text with LSMW now i want to uplaod the sales and po text for material master can you give some link or ref. code to upload the text i have near 1000 items for which i want to uplaod text when i have done the recording with SHDB i have not found filed in recording.
regards,
zafarHi,
I have made the code in se38
as below but still it is not working
REPORT ZTEST_TEXT.
data: headerl like thead occurs 0 with header line.
data itab3 like tline occurs 0 with header line.
headerl-tdobject = 'MATERIAL'.
headerl-tdname = '00000000000LSMW123'. "(Material : 000000000300000560, Sorg : 0001, Dist channel: 01)
headerl-tdid = 'BEST'.
headerl-tdspras = 'E'.
append headerl.
move '*' to itab3-tdformat.
move 'Testing PO text' to itab3-tdline.
append itab3.
call function 'SAVE_TEXT'
exporting
header = headerl
insert = ' '
savemode_direct = ' '
tables
lines = itab3
exceptions
id = 1
language = 2
name = 3
object = 4
others = 5.
IF SY-SUBRC = 0.
CALL FUNCTION 'COMMIT_TEXT'
EXPORTING
OBJECT = headerl-tdobject
NAME = headerl-tdname.
ENDIF.
break-point.
regards,
zafar -
Upload sales text for material master using LSMW direct input method
Hello Experts,
I was trying to upload sales text for a material master using LSMW direct input method.
I followed the following steps for the same
Tab dlimited Text file format
MATNR LONGTEXT LINE
MATERIAL1 LONGTEXT FOR MATERIAL MATERIAL1 1
Step1 -> Maintain object attributes
Object -> 0001
Method-> 0001
Program name -> /SAPDMC/SAP_LSMW_IMPORT_TEXTS
Program type -> D
Step2 -> Maintain Source Structure
Source structure -> LONG_TEXT Source structure for long text
Step 3-> Maintain souce file
Source Fields
ZLONG_TEXT Source structure for long text
MATNR C(018) MATNR
LTEXT C(132) LTEXT
Step 4-> Maintain structure relationship
Structure Relations
/SAPDMC/LTXTH Long Texts: Header <<<< ZLONG_TEXT Source structure for long text
Select Target Structure /SAPDMC/LTXTH .
/SAPDMC/LTXTL Long Texts: Row <<<< ZLONG_TEXT Source structure for long text
Select Target Structure /SAPDMC/LTXTL .
Step 5-> Maintain Field mapping and conversion rules
Here i have assigned constan rules to couple of them like
/SAPDMC/LTXTH Long Texts: Header
Fields
OBJECT Texts: Application Object
Rule : Constant
Code: /SAPDMC/LTXTH-OBJECT = 'MVKE'.
NAME Name
Source: ZLONG_TEXT-MATNR (MATNR)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTH-NAME = ZLONG_TEXT-MATNR.
ID Text ID
Rule : Constant
Code: /SAPDMC/LTXTH-ID = '0001'.
SPRAS Language Key
Rule : Constant
Code: /SAPDMC/LTXTH-SPRAS = 'E'.
/SAPDMC/LTXTL Long Texts: Row
Fields
TEXTFORMAT Tag column
Rule : Constant
Code: /SAPDMC/LTXTL-TEXTFORMAT = '/'.
TEXTLINE Text Line
Source: ZLONG_TEXT-LTEXT (LTEXT)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTL-TEXTLINE = ZLONG_TEXT-LTEXT.
Step6 -> Specify file
Legacy Data On the PC (Frontend)
Data D:\Sales_Longtext.txt
Step7 -> Assign File
ZLONG_TEXT Source structure for long text
Data D:\Sales_Longtext.txt
Step8 -> Read data
Output result
Source Structure Read Written Not Written
ZLONG_TEXT 1 1 0
Transactions Read: 1
Records Read: 1
Transactions Written: 1
Records Written: 1
Step 8 -> Display read data
Field Name Field Text Field Value
MATNR MATNR MATERIA1
LTEXT LTEXT SALES TEXT FOR Material MATERIAL1
Step 9 -> Convert data
File Read: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.read
File Written: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Transactions Read: 1
Records Read: 1
Transactions Written: 1
Records Written: 2
Step 10 -> Display converted data
1 /SAPDMC/LTXTH 1MVKE MATERIAL1 0001E
2 /SAPDMC/LTXTL 2/ SALES TEXT FOR Material MATERIAL1
Step 11 -> Start direct input program
Output result for the same
Legacy System Migration Workbench
Project: ZNRD_PRJ1 ORH
Subproject: ZNRD_SUBPRJ2 Upload long text
Object: ZNRD_LTEXT Long text tru direct input
File : ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Long Texts in Total: 1
Successfully Transferred Long Texts: 1
Non-Transferred Long Texts: 0
Now when i check the material master sales view -> sales text it is empty.
Please help me with the same.
Regards,
Ranjith NHello Experts, I was trying to upload sales text for a material master using LSMW direct input method.
I followed the following steps for the same
Tab dlimited Text file format
MATNR LONGTEXT LINE
MATERIAL1 LONGTEXT FOR MATERIAL MATERIAL1 1 *************************************************************************************************************
Step1 -> Maintain object attributes
Object -> 0001
Method-> 0001
Program name -> /SAPDMC/SAP_LSMW_IMPORT_TEXTS
Program type -> D
Step2 -> Maintain Source Structure
Source structure -> LONG_TEXT Source structure for long text
Step 3-> Maintain souce file Source Fields
ZLONG_TEXT Source structure for long text
MATNR C(018) MATNR
LTEXT C(132) LTEXT
Step 4-> Maintain structure relationship
Structure Relations
/SAPDMC/LTXTH Long Texts: Header <<<< ZLONG_TEXT Source structure for long text
Select Target Structure
/SAPDMC/LTXTH . /SAPDMC/LTXTL Long Texts: Row <<<< ZLONG_TEXT Source structure for long text
Select Target Structure /SAPDMC/LTXTL .
Step 5-> Maintain Field mapping and conversion rules
Here i have assigned constan rules to couple of them like
/SAPDMC/LTXTH Long Texts: Header
Fields
OBJECT Texts: Application Object
Rule : Constant
Code: /SAPDMC/LTXTH-OBJECT = 'MVKE'.
NAME Name
Source: ZLONG_TEXT-MATNR (MATNR)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTH-NAME = ZLONG_TEXT-MATNR.
ID Text ID
Rule : Constant
Code: /SAPDMC/LTXTH-ID = '0001'.
SPRAS Language Key
Rule : Constant
Code: /SAPDMC/LTXTH-SPRAS = 'E'.
/SAPDMC/LTXTL Long Texts: Row
Fields
TEXTFORMAT Tag column
Rule : Constant
Code: /SAPDMC/LTXTL-TEXTFORMAT = '/'.
TEXTLINE Text Line
Source: ZLONG_TEXT-LTEXT (LTEXT)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTL-TEXTLINE = ZLONG_TEXT-LTEXT.
Step6 -> Specify file Legacy
Data On the PC (Frontend)
Data D:\Sales_Longtext.txt
Step7 -> Assign File ZLONG_TEXT
Source structure for long text
Data D:\Sales_Longtext.txt
Step8 -> Read data
Output result
Source Structure Read Written Not Written
ZLONG_TEXT 1 1 0
Transactions Read 1
Records Read: 1
Transactions Written: 1
Records Written: 1
Step 8 -> Display read data
Field Name Field Text Field Value
MATNR MATNR MATERIA1
LTEXT LTEXT SALES TEXT FOR Material MATERIAL1
Step 9 -> Convert data
File Read: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.read
File Written: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Transactions Read: 1
Records Read: 1
Transactions Written: 1
Records Written: 2
tep 10 -> Display converted data
1 /SAPDMC/LTXTH 1 MVKE MATERIAL1 0001 E
2 /SAPDMC/LTXTL 2/ SALES TEXT FOR Material MATERIAL1
Step 11 -> Start direct input program
Output result for the same
Legacy System Migration Workbench Project:
ZNRD_PRJ1 ORH
Subproject: ZNRD_SUBPRJ2 Upload long text
Object: ZNRD_LTEXT Long text tru direct input
File : ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Long Texts in Total: 1
Successfully Transferred Long Texts: 1
Non-Transferred Long Texts: 0
Now when i check the material master sales view -> sales text it is empty. Please help me with the same.
Regards,
Ranjith N -
I have encountered a peculiar problem in MM01 material master upload.
I have encountered a peculiar problem in MM01 material master upload. The
BDC program uploads data using Session method. The problem is when i
process the session in foreground mode the data uploads successfully, but
when i process it in background mode it gives the following errors in the
log.
'Control Framework: Fatal error - GUI cannot be reached'.
'Runtime error RAISE_EXCEPTION has occurred'.
When i debugged the program i found that this error is encountered when
data is being input in 'Purchase Order text' editor of MM01 transaction.
There is no problem with the BDC recording or the program as i could see.
The only problem what i believe is the system is unable to call the text
editor for inputting purchase order text data in background mode.Hi
Try uploading a BAPI it would be better
http://www.saptechies.com/mm01-upload-using-bapi/
Regards
Shiva -
How to add basic data text into material master?
Hi anybody,
I want update only basic data text into material master. how to update basic data text ?
is it any bapi or functional module is there in abap?
anybody please tell me.
tks
s.muthuHi Subramanyan,
Check this function module:
CREATE_TEXT
Check out this sample program:
REPORT ZMM_INSERT_LONGTEXT.*Internal table to hold long text...
DATA:
BEGIN OF T_UPLOAD OCCURS 0,
MATNR LIKE MARA-MATNR, " Material number
ID(2) TYPE C, " Identification
LTEXT LIKE TLINE-TDLINE, " Long text
END OF T_UPLOAD,*Internal table to hold long text....
T_LINE LIKE TLINE OCCURS 0 WITH HEADER LINE.DATA:
W_GRUN LIKE THEAD-TDID , " To hold id
W_OBJECT LIKE THEAD-TDOBJECT VALUE 'MATERIAL',
" To hold object id
LV_VALUE(70). " Value to hold material number
START-OF-SELECTION.* This perform is used to upload the file
PERFORM UPLOAD_FILE.* This perform is used to place the text in MM02 transaction
PERFORM PLACE_LONGTEXT.
*& Form create_text
This routine used to create text in MM02 transaction
Passed the parameter w_grun to P_C_GRUN
and lv_value to P_LV_VALUE
FORM CREATE_TEXT USING P_C_GRUN
P_LV_VALUE. DATA:
L_ID LIKE THEAD-TDID,
L_NAME(70). MOVE : P_C_GRUN TO L_ID,
P_LV_VALUE TO L_NAME. CALL FUNCTION 'CREATE_TEXT'
EXPORTING
FID = L_ID
FLANGUAGE = SY-LANGU
FNAME = L_NAME
FOBJECT = W_OBJECT
SAVE_DIRECT = 'X'
FFORMAT = '*'
TABLES
FLINES = T_LINE
EXCEPTIONS
NO_INIT = 1
NO_SAVE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
CLEAR LV_VALUE.
ELSE.
DELETE T_LINE INDEX 1.
ENDIF.ENDFORM. " create_text&----
*& Form upload_file
This routine is used to upload file
No interface parameters are passed
FORM UPLOAD_FILE . CALL FUNCTION 'UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = ' '
FILETYPE = 'DAT'
ITEM = ' '
FILEMASK_MASK = ' '
FILEMASK_TEXT = ' '
FILETYPE_NO_CHANGE = ' '
FILEMASK_ALL = ' '
FILETYPE_NO_SHOW = ' '
LINE_EXIT = ' '
USER_FORM = ' '
USER_PROG = ' '
SILENT = 'S'
IMPORTING
FILESIZE =
CANCEL =
ACT_FILENAME =
ACT_FILETYPE =
TABLES
DATA_TAB = T_UPLOAD
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. SORT T_UPLOAD BY MATNR ID.
ENDFORM. " upload_file
*& Form place_longtext
This routine places the text in MM02 transaction
No interface parameters are passed
FORM PLACE_LONGTEXT . LOOP AT T_UPLOAD. T_LINE-TDFORMAT = 'ST'.
T_LINE-TDLINE = T_UPLOAD-LTEXT.
APPEND T_LINE. IF T_UPLOAD-ID EQ 'BT'.
MOVE T_UPLOAD-MATNR TO LV_VALUE.
MOVE 'GRUN' TO W_GRUN. "Test ID for Basic data text
PERFORM CREATE_TEXT USING W_GRUN LV_VALUE.
ENDIF. IF T_UPLOAD-ID EQ 'IT'.
CLEAR W_GRUN.
MOVE T_UPLOAD-MATNR TO LV_VALUE.
MOVE 'PRUE' TO W_GRUN. "Test ID for Inspection text
PERFORM CREATE_TEXT USING W_GRUN LV_VALUE.
ENDIF. IF T_UPLOAD-ID EQ 'IC'.
CLEAR W_GRUN.
MOVE : T_UPLOAD-MATNR TO LV_VALUE,
'IVER' TO W_GRUN.
"Test ID for Internal comment
PERFORM CREATE_TEXT USING W_GRUN LV_VALUE.
ENDIF.
ENDLOOP.ENDFORM. " place_longtext
Hope this helps you.
Regards,
Chandra Sekhar -
Function Modules or Methods to Retrieve texts in Material Master
Hi All,
Can you get me a list of Function Modules which retrieve the text from Material Master.
My requirement is to extract texts:
Basic Text - at material level
Purchase Order text - at material level
Sales Texts - at material-sales org level
Thanks in Advance.
Sure Points for all Valuable answers
Regards
Vinayakhi
u can get using read_text FM ask ur functionl person to give you the ID and other details required..
u can also get it from STXH table... from which even the FM gets data.. -
How to Update the Basic Data text in Material Master.
Hi Abapers,
I have more than 5000 materials for update basic Data text inside Material Master.
how to update basic data text using abap programe? is there any bapi or normal program?.
anybody give me sample of this.
Thanks
S.Muthu.
IT Dept.Hi
You can do by using the FM SAVE_TEXT.
Just populate text into table i_tline.
Local data declaration
DATA: l_wa_thead TYPE thead, " Header
l_wa_tline TYPE tline. " Work area for tline
Populate header
l_wa_thead-tdobject = c_obj_material.
l_wa_thead-tdname = wa_data-matnr.
l_wa_thead-tdid = c_id_best.
l_wa_thead-tdspras = sy-langu.
l_wa_thead-tdluser = sy-uname.
l_wa_thead-tdfdate = sy-datum.
l_wa_thead-tdtxtlines = '1'.
IF i_tline[] IS NOT INITIAL.
l_wa_tline-tdformat = c_slash.
APPEND l_wa_tline TO i_tline.
ENDIF.
Text shd start from next line
l_wa_tline-tdformat = c_slash.
CONCATENATE c_text wa_data-text
INTO l_wa_tline-tdline SEPARATED BY space.
Append the new text to the int table
APPEND l_wa_tline TO i_tline and l_wa_thead
C* Local data declaration
DATA: l_wa_thead TYPE thead, " Header
l_wa_tline TYPE tline. " Work area for tline
Populate header
l_wa_thead-tdobject = c_obj_material.
l_wa_thead-tdname = wa_data-matnr.
l_wa_thead-tdid = c_id_best.
l_wa_thead-tdspras = sy-langu.
l_wa_thead-tdluser = sy-uname.
l_wa_thead-tdfdate = sy-datum.
l_wa_thead-tdtxtlines = '1'.
IF i_tline[] IS NOT INITIAL.
l_wa_tline-tdformat = c_slash.
APPEND l_wa_tline TO i_tline.
ENDIF.
Text shd start from next line
l_wa_tline-tdformat = c_slash.
CONCATENATE c_text wa_data-text
INTO l_wa_tline-tdline SEPARATED BY space.
Append the new text to the int table
APPEND l_wa_tline TO i_tline.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
client = sy-mandt
header = l_wa_thead
savemode_direct = c_check
TABLES
lines = i_tline
EXCEPTIONS
id = 1
language = 2
name = 3
object = 4
OTHERS = 5.
IF sy-subrc = 0.
COMMIT WORK.
endif. -
View "Purchase Order Text" in Material Master
Hi,
I need replicated text of view "Purchase Order Text" in ECC to Material Master in SRM.
Or When We create a shopping cart in the way in which the text replicated "Purchase Order Text" from the the Material Master(ECC).
Regards
AngieFor Purchase Order text in Material Master:
use this code for Purchase Order text,
DATA: l_lsize(3) TYPE n VALUE '132'.
DATA: lwa_tline TYPE tline,
lwa_thead TYPE thead,
lwa_valid TYPE ty_input(flat file data),
lwa_temp TYPE ty_input.
DATA: lit_tline TYPE STANDARD TABLE OF tline.
lwa_thead-tdobject = 'MATERIAL'.
lwa_thead-tdid = 'BEST'.
lwa_thead-tdspras = 'E'.
lwa_thead-tdlinesize = l_lsize.
LOOP AT pu_it_valid INTO lwa_valid.
lwa_temp = lwa_valid.
AT NEW matnr.
CLEAR: lwa_thead-tdname,
lwa_tline-tdformat.
lwa_thead-tdname = lwa_temp-matnr.
ENDAT.
IF lwa_tline-tdformat IS INITIAL.
lwa_tline-tdformat = ' \ '.
ELSE.
lwa_tline-tdformat = '='.
ENDIF.
CLEAR lwa_tline-tdline.
lwa_tline-tdline = lwa_valid-text_line.
APPEND lwa_tline TO lit_tline.
AT END OF matnr.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
client = sy-mandt
header = lwa_thead
insert = c_x
savemode_direct = c_x
TABLES
lines = lit_tline
EXCEPTIONS
id = 1
language = 2
name = 3
object = 4
OTHERS = 5.
IF sy-subrc = 0.
REFRESH lit_tline.
ENDIF.
ENDAT.
CLEAR: lwa_temp,
lwa_valid.
ENDLOOP. -
BDC - MM02 _long text for material PO upload
Hi experts,
I want to upload Long text for material PO in MM02 (Purchase order text view)
throuh BDC upload. I have successfully done recording for this transaction. But in the recording it show no table field for that particular long text.
Pls help me to do this issue.
Thanks.Hi
See the sample program for this and modify as per your requirement.
REPORT zmm_longtext
NO STANDARD PAGE HEADING
LINE-SIZE 255.
Internal Table for Upload of Long Texts Data
DATA: BEGIN OF itab1 OCCURS 0,
matnr LIKE mara-matnr, " Material
text1 LIKE tline-tdline, " Long Text
END OF itab1.
Internal Table for Upload of Long Texts Data
DATA: BEGIN OF itab OCCURS 0,
matnr LIKE mara-matnr, " Material
text LIKE tline-tdline, " Long Text
END OF itab.
To create Long Text lines for CREATE_TEXT function module
DATA:BEGIN OF dt_lines OCCURS 0.
INCLUDE STRUCTURE tline. " Long Text
DATA:END OF dt_lines.
Variable declarations for CREATE_TEXT function module
DATA : dl_name TYPE thead-tdname, " Object Name
dl_lan TYPE thead-tdspras, " Language
gv_matnr TYPE matnr.
Constants
CONSTANTS:
Object ID for Long Text of Material Basic Data 1
c_best TYPE thead-tdid VALUE 'GRUN',
c_material TYPE thead-tdobject VALUE 'MATERIAL'. " Object
Parameters
PARAMETERS p_file LIKE rlgrap-filename.
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
Start Of Selection
START-OF-SELECTION.
*To Upload Flat file
CALL FUNCTION 'UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = itab1
EXCEPTIONS
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
OTHERS = 7.
SORT itab1 BY matnr.
LOOP AT itab1.
CLEAR gv_matnr.
SELECT SINGLE matnr INTO gv_matnr
FROM mara WHERE bismt = itab1-matnr.
IF itab1-text1 NE ' '.
itab-matnr = gv_matnr.
itab-text = itab1-text1.
APPEND itab.
ENDIF.
CLEAR itab.
ENDLOOP.
DELETE itab WHERE matnr EQ ' '.
Upload the Texts
SORT itab BY matnr.
LOOP AT itab.
dt_lines-tdformat = 'ST'.
dt_lines-tdline = itab-text.
APPEND dt_lines.
dl_lan = sy-langu.
dl_name = itab-matnr.
Call the Function Module to Create Text
CALL FUNCTION 'CREATE_TEXT'
EXPORTING
fid = c_best
flanguage = dl_lan
fname = dl_name
fobject = c_material
save_direct = 'X'
fformat = '*'
TABLES
flines = dt_lines
EXCEPTIONS
no_init = 1
no_save = 2
OTHERS = 3.
IF sy-subrc <> 0.
WRITE:/ 'Long Text Creation failed for Material'(001),
itab-matnr.
ELSE.
WRITE:/ 'Long Text Created Successfully for Material'(002),
itab-matnr.
ENDIF.
AT END OF matnr.
REFRESH dt_lines.
ENDAT.
ENDLOOP.
<b>Reward points for useful Answers</b>
Regards
Anji -
List of material number with PO text from material master
I want to get a list of materials number with PO text from material master. Can anybody help ?
The purchase order texts maintained in the material master are stored
as SAPScript text files in tables STXH (header) and STXL (lines). For
material master records:
Field TDOBJECT = 'MATERIAL'
Field TDNAME = material number (MARA-MATNR).
So you should be able to write a small report to extract the data. -
Material master Upload with LSMW
Hi
When I make Material master Upload with LSMW, I could not find any entry in planning file.
Please explain.Mayuresh,
Not all LSMW transactions properly update Planning file.
You can run transaction MDAB to set up planning file in Background
You can run transaction MDRE to detect and correct Planning file inconsistancies in Background.
It is probably a good idea to run these jobs periodically, say, weekly, in most production environments.
Regards,
DB49 -
What is the standard program for Material Master upload using LSMW
Dear All
I am trying to use the MM upload using DATMIG_INF4. I want to know what are the different standard projects that are used for Material master upload.Hi Amol,
You can load the material master using direct input method in LSMW ,details of which are as follows:
Object 0020 Material master
Method 0000
Program name RMDATIND
Program type D Direct input
Please revert back in case of any doubt.
Cheers
VJ -
Hai guys,
I want to upload material using lsmw for material master.i am following all the steps in the lsmw. i am using the batch input method for uploading.If the sales unit is different from the unit of measure..i will be getting the conversions data like numerator and denominator fields.
i am getting the same fields if the issue unit is also different.so i couldnt able to map it correctly with the conversion fields..this repeating fields are not captured in the recording for the target fields.
so i couldnt able to map it.please help me to solve this problem..
with regards,
sathish..Hi,
Please close this duplicate thread..
Thanks,
Naren -
When a PO is created from ME57/ME59, the PO text from the material master is not carried over in to the PO. But For the same materials when a PO is created from Me51n it does get copied in to the PO.
I tried changing settings in 'copying rules for item texts' for Pos . but it didnt help.
Any suggestions??Thanks in advanceNeetu/W1n
Thanks for the replies.
I did maintain the Copy rules for item texts
Here are my settings for material Po texts
0 (Seq)Puchase order (Source object) Po text(Source text) Blank(fix indicator)
1 (Seq) material master(Source object) Po text(Source text) *(fix indicator)- in this case i tried using blank, still didnt work
Text is Copied fine when i use ME21n, It just doesnt work when we use me57 or me59?!?
Any more suggestions. thanks in advance
Maybe you are looking for
-
How to call a custom form with parameter throgh apps personalization?
Hi All, I have developed a custom form in 10g and register it to apps r12. I am calling this form through personalization by lauch a function associated with form. Issue is this, I want to pass a parameter to this form from apps eg. Receipt_num. I wa
-
Need help on optimizing an import
Hi, we run a medium-sized (70.000 items) webshop for a customer, using oracle 9i in the latest version. Once a month, this customer wants to import the whole items of one supplier. The importfile is splitted up using php and written into an (import-)
-
hi friend!!!! I want to create sales order , delivery , billing for the date of 01.04.2008 this all transaction i want to do today's date i set period open for month of 01.04.2008 but when i create sales order today ,system confirm schedule line on
-
How can I convert Bigint value which produced with Timespan?
Below from MS SQL, tResultTime's datatype is Bigint Below from my C# project's UI and I need to get a result like "Elapsed Time". How can I get that?
-
ADF Faces showDetailItem seems to "load" child elements twice on tab select
Problem Summary: Child elements of showDetailItem are being loaded/executed twice. The parent of the showDetailItem is a showOneTab, and the child of showDetailItem is an af:objectImage, which calls a servlet I have written that outputs an image. The