Material price getting picked incorrectly in production order

Hi,
The FG is maintained with price control V. However, at the time of GR for production order, the standard price is getting picked instead of moving average price. Why can this happen? Note that the material quantity was zero before the GR for production order. Can this be the reason?
I checked that there no current std cost estimate for the material and the transfer control is also deactivated. Valuation variant is set up to read price as per price control.
Moreover, when I changed the price control on material master to 'S', system picked up the moving avg price, which is even more surprising. Note that at this time the stock of material was existing in the plant.
Can someone explain this behavior?
BR
Abhinav

Dear Abhi
Just to add Ajay Sir's reply: at step "Define Goods Received Valuation for Order Delivery" you need to select your valuation variant.
Further using price control 'V' for inhouse manufactured materials i.e. FG and SFGs may seriously distort your price in material master. As at the time of settlement of orders system looks and compares stock of material with individual orders and post the variance accordingly. If suppose you have  10 orders in a period and  each order for 10 qty and at the month end you have a stock of 11 qty, and your each order is having a variance of Rs10/- then at the month end you will end up with a mat price of Rs.20/- (say base MAP) + 10x10 (variance value for each order) i.e. total MAP will become Rs. 120/- for this material. So kindly have a serious look and then go for this kind of decesion.
For this reason apart from other reasons SAP recommend 'S' for in house materials.
Regards
Rajneesh Saxena

Similar Messages

  • How to get change date in Production Order ?

    Dear Friends,
    I want to know it, how to get change date in Production Order "Administration-TAB".
    F1-Help, It is displayed with "Change date for Order Master". and Structure table "CAUFVD".
    But, CAUFVD is not Transp. Table.
    Which table should I read ?
    Thanks in advance
    Yamazaki-H

    Dear Friend
    Thank you for an answer.
    It was settled.
    Best regards.

  • Price error message while creating production order- Urgent

    In past i was getting warning message of 'No price could be determined for material/batch and Plant" message no CK 465 at the time of saving the production order after creation but now it has stopped even though there is no price in material amster.
    I changed the configuration to Error message (TC: OPR4_PPCO) and it works but why not for warning message?
    Thanks

    Please confirm where i should check for Activity price?
    But then why we are able to get error message.
    Reexplain:
    Creating a production order which do not have standard cost in material master.
    While saving, getting a error message'No price could be determined.......'
    Now changing the message to Warning through configuration using TC: OPR4_PPCO
    Now again creating the production order and saving
    Expectation to have same message as warning but not getting anything.
    Thanks
    Edited by: vineet garg on May 1, 2008 12:14 AM

  • Price difference on cancellation of production order confirmation

    Hi,
    We are having a material which is maintained at price control "S". We have created a production order for the material. In due course of business, we did confirmation for say 100 pcs of the material. However, immediatly on confirmation, we realized that we do not need to do the confirmation & hence we did the cancellation of the production order confirmation using CO13.
    On doing the production order confirmation cancellation, we observed that the system has posted some amount to "price difference account"
    We also observed that once in a while this kind of entries do get posted.
    It is requested to please let us know in why system is behaving this way?
    We have checked SAP Note no 216080 "Price difference when reversing GI for S-Priced material" & SAP Note no 215980 'Price difference during GR for the production order". However we are not convinced that these could be the reason for the price difference.
    Thanking you in anticipation
    Regards
    Santosh Kumar Agarwal

    Hi,
    Yes, you are correct in the understanding that the system creates quants in 914 when the production order confirmation is cancelled. But, it does not generate any TR or TO in the background to post the stock back into the original storage type.
    Can we not use the put away strategies so that the system determines where to place the material? My query is that despite all the configurations for automatic TO creation and confirmation for movement type 262, it does not generate a TO (or TR) in the background when a production order confirmation is cancelled using CO13.
    However, if I manually post a material using MB1A for 261 movement type and reverse it using 262, it generates a TO and confirms it as per the setting in configuration.
    The same thing does not work when we run it through PP (CO11N and then CO13).
    Any suggestions on how to approach this and where to check for missing configurations?
    Thanks and Regards,
    Gaurishankar

  • How to get a list of production orders for a work center?

    Hello SDN Community, 
    I have an requirement to display in a pop-up window a list of production orders for a work center.
    Does anyone know which screens/transactions would show this relationship?
    Or better yet, does anyone know how to demonstrate this from the tables themselves?
    Thank you,
    Dean Atteberry.

    Hello Mangalraj.S
    >>Goto COOIS-->For the field List select PPIOO000 - operations and layout -->standard layout
    >>and execute,by this you will be able to see the operations for each order and to which
    >>work center they are assigned.
    The system I am working on is ECC 6.0.
    For this system the values in the dropdown for the "List" field are "Capacities, Items, Order Headers, Sequences, Trigger Points, etc".  But nothing that says PPIOO000 - operations and layout.
    >>Or else in the in input screen of COOIS,enter the work center for which you want to see which
    >>are the production order's assigned and execute.
    For system I am working in, I do get a grid display when entering a work center.  It has columns like "Order, Material, Icon, Order Type, MRP cntrlr, etc."   But no column with Work Center.
    Any further insight into how to use this transaction to display a list of production orders for a work center would be greatly appreciated.
    Thank you,
    Dean Atteberry.

  • CST is not getting picked up in sales order

    Dear Experts,
    We are following TAXINN procedure and we have maintained condition record for excise condition type - JEXP, JECS & JA1X and tax condition types - JIVC and JIVP. But in sales order, Excise condition types and Vat is getting picked automatically for local customer. But if I chose a CST customer CST is not getting picked automatically even though I have maintained condition record for the same. I have told my client to use alternative tax classification but my client doesnt want to follow this procedure.
    Kindly let me know, how can I make the CST to  be picked automatically in sales order.
    Thanks & Regards,
    Reji S

    Dear Reji,
    These may be the possible areas for the issue.
    1.Check the ship to party Tax classification in the customer master>Sales area data>billing tab.
    2.Check the Tax classification of the material master-->Sales org data view.
    3.Check the region of the ship to party.
    I hope this will help you,
    Regards,
    Murali.

  • Price not picking while creating purchase order

    hi all,
    i have created a pricing procedure and assigned to the vedor, but while creating purchase order the material price is not picking up.if i use the standard one the price is picking up. can anyone explaing any setting iam missing.
    regards
    thyagarajan

    Hi
    In your pricing procedure
    For the condition type Automatic Gross price PB00, you have assigned am Access sequence.
    <b>Access sequence</b>: An access sequence is a search strategy by means of which the system searches for valid records in various condition tables. It consists of one or more accesses. The sequence of accesses controls the priority of the individual condition records among each other. Through the accesses, the system is told where to look first and where to look next for a valid condition record in each case.
    Once the pricing procedure triggers, System looks for the valid condition recorrd for the condition type PB00 as per the priority listed in Access sequence.
    Example: If purchase info record is the first priority and you maintained the Info record then system picks the price from Info record into PO.
    If no valid condition record found then it will trigger PBXX Manual Gross price condition in PO and ask to enter the price manually.This is called condition technique.
    So check whether you maintained the Condition record for PB00 or not?
    Regards
    Ramakrishna

  • How the material PRT issue/receipt to the production order can be handled?

    Hi PP Gurus,
            For one of our clients, the handling of PRT is to be controlled with the issue/receipt for the production order.
    1. What is the procedure for issue/receipt of PRT material in the SAP?
    2. What is the procedure to block the PRT for the creation/release of production order when it was already assigned to the other production order during the same time?
    3. The PRT is to be available automatically once the assigned production order operation is confiremd.How it can be handled in the SAP?
    Appreciate your early response.
    Thanks,
    Reddy.

    Hi Ramanujam,
            Thanks for your response.
         1. The dies can be used for the production of Pressing, Casting and Forging etc. These dies will be managed in the stores. The stores representatives will issue the die to the shop floor for an operation of a production order.They will return back the die once the production is completed at that operation using the die. How to map this process in the SAP.
            Typically, these dies can be treated as PRT materials in the SAP system.
         2. OPJK configuration is not sufficient. The same PRT will be assigned to the many production orders during the same time.The system won't block with only this setting. There are some other steps involved to complete the process.
                     I would like to know the complete procedure with all the steps to block the PRT once it was assigned to the production order operation. The same PRT is to be available for other production orders automatically once the operation is confirmed after production.

  • Material to be produce included in production order component review

    Hello gurus, i have a issue about production order.
    1. The BOM of XXXX material have the next components:
        A
        B
        C
    2. When i create a production order for 100 ST of  XXX material, the component review in production order includes the next:
      Position  Material  Quantity
      0000      XXXX        100 (row blocked)
      0010     A                  20 ST
      0020     B                   1.5 KG
       0030    C                    10 ST
    3. I don´t know why the component review in production order includes the position 0000 and blocked. It looks like the BOM of XXXX material have a recursive position, but isn´t real.
    Please, help me with this issue
    Regards,
    Johnny Leguia

    The issue was solved.
    The co-producto indicator in a BOM position makes that all co-product materials (that hace co-product indicator in mrp view) were listed in component overview. The material to be produced had this co-product indicator in mrp view.
    Thanks for help.
    Regards,
    Johnny Leguia

  • Open TRs not getting deleted after TECO production order

    Hi,
    We're having an issue.  We're using WMPP interface to supply the production line for the production orders.  The auto TRs are generated when the production orders are released. 
    After TECO the production orders, the open TRs are not getting deleted automatically.
    Could anyone know if these TRs get deleted automatically when we do the TECO production order?
    If yes, do we have any restriction or condition based on this, the TRs get deleted?
    Please explain.
    Thank you.
    with regards,
    Muthu.

    Hi Abhijit,
    Thank you for your reply.  It does not help me.
    The auto TR creation is happening now as required.  No issue on this.
    When you do the TECO, it also cancels the TRs.  I tested this also. 
    There're some scenario this open TRs cancellation is not happening.  I do not know when these open TRs are not cancelled.  If you know answer for this, please let me know.
    Thank you for your help and time.
    with regards,
    Muthu.

  • How can I get status of a production order from database?

    Hi,
       I need to write a report to show user details about the production order. Because there are some customized linkages between our sales order and production order, we can't use COOIS directly.
      But I met a problem when writing this report. I found that after TECO, all lines on reservation of the production order will be set deletetion flag. So, I need to tell which orders had been TECO-ed. But I don't know from which fileds and which tables I can get the data to tell this. Please help.

    Hi Robbie,
    You can use function module STATUS_READ
    You need to pass it the object number - for a PP order header it will be something like OR000001000000
    You can also set an indicator to only retrieve active status values.
    The FM returns a table of status codes which are in the internal format and look like I0002
    Then use table TJ02T for system statuses to determine what these internal codes mean. If you have user statuses you should be able to work out where they are stored by looking at the technical information behind the configuration transactions.
    Regards,
    Monika

  • How to get components inforation of production order in report?

    Hi,
       I am writing a report which needs get ordered components information of production orders. But, the difficult is when any one delete one component after release, the deletion indicator in reservation will be marked. And if user make the order TECO, all components will be marked as deleted. So, how can I tell which was deleted by user indeed (not caused by TECO). Thanks.

    Can you please advise exactly where or what you found
    Thanks
    Kristen

  • How to replenish warehouse pick bins for production orders

    Hi All,
    Currently in WM we use LP22 to replenish the pick bins, here LP22 considers all the outbound deliveries for creating the replenishment TRu2019s
    In the similar fashion how can I use LP22 to consider Production orders (raw materials and their quantities) for replenishing the pick bins? My aim is to replenish the pick bins not just for the outbound deliveries but also for the production orders
    Please suggest if this can be accomplished using LP22 by running in different ways or there is different transaction.
    FYI: the materials that are ordered in the outbound and production order are same
    Please suggest
    Thank you

    Hi,
    Instead of opening multiple threads in different forums, it would be better if you reply back to the suggestion provided as to whether it helped or if you need any further help.
    This is the link to your same query posted in PP forum
    LP22/LP21 for production order
    I hope you have gone through the forum rules & would do your bit to ensure the forum is used properly.
    Regards,
    Vivek

  • Price not picked to  Existing Purchase Order

    Hi,
    I have an Issue while converting Purchase requistion to PO Prices are not yet picked.
    1. Cretaed PO with existing Requisition. Prices are picked. For example PO is created on 05/31/2011.
    2. After I have created New Material with Info record Validity periods from 06/01/2011 for same vendor.
    3. Amend this Item to Purchase requisition.
    4. Convert to New PO -Prices are picked, But converting to Existing PO( PO created before Material creation 05/31/2011) Prices not yet picked.
    I have analyze the pricing procedure also, no condition record found on Doc date.
    Kindly explain why price not yet picked to the existing po.
    Regards,
    Sridhar.

    Typically, the prices are taken from the info record rather than the PR. If there is no price is maintained then the system takes from the last PO stored in the info record.
    Can you check what is the price date control specified in your info record (this is under purchasing org data 1 view under conditions)? This setting also drives how prices are derived.

  • How to get field name on Production Order

    Dear All,
    I am going to make report on using items from production order. I'm facing problem to get following fields. These fields are on production ordersu2019 screen and tab is Summary.
    1-Actual Component Cost
    2-Actual Additional Cost
    3-Actual Product Cost
    I don't know where these fields are in database.
    Can anybody help me in this regards
    Sohail Anwar Ali

    Dear Sohail Anwar Ali,
    By B1 help:
    Actual Component Cost Total value of all components issued to the Production Order.
    Actual Additional Cost Displays the actual additional costs that occur when a component is defined in the Item Master Data as a non-inventory item, for example, a service or labor cost.
    If there is more than one additional cost for the item, the cost displayed here is the sum of all additional costs.
    The field is updated on product completion.
    Actual Product Cost Total value of all products received for this Production Order.
    Best Regards
    Jane Jing
    SAP Business One Forums team

Maybe you are looking for