Material to be issued without receipt

Dear All,
If I have to issue the raw material without receipt to production for consumption because of urgency. and I am making the migo next day. during that period stock should show in negative.
How to do this in SAP ?
Please help me out.
Regards,
Sandeep

Hi
In  Tcode OMJ1, here you have to check the negative stock allowed for Plant as well as storage location.
then ,Negative stock will now be allowed in the selected storage locations for all materials that have the negative stock indicator activated in the material master in the storage 2 view.
Regards
Kailas Ugale
Edited by: kailasugale on Nov 1, 2011 3:11 PM

Similar Messages

  • Material issue without order/ project

    dear all,
    i need one advise from your side :
             we purchase some materials from outside, assemble it and sell it to customer. but we dont want to create production order for that is it any certain process in SAP so that when we do the assembly and gr for parent material will done at the same time child material will automatically issue from stores.

    we usually buy some kit material from vendor. we assemble it in our factory and sell to customer. as per std, sap process. we have to create bom and production order for parent material and material will issue against assembly operation in operation sequence of order. but this KIT materials having many of material codes which are difficult to maintain in bom and process. so my request is to bypass order system ,

  • Material Serial Number Issue.

    Dear Friends,
    Material Serial Number Issue.
    Its better to explain with the example.
    Material Number : ABCD with serial number as 123456
    There is a reservation for the Material ABCD from work order, now the warehouse person Goods Issues for the reservation ABCD with serial number 06-123456.(he issued wrong serial number)
    Correction action - Reverse Goods Issue for serial number 06-123456, now Goods issue for correct number as 123456. But the systems doesnot allows the serial number, error Material ABCD 123456 is already installed. Thenin  IQ09 the material ABCD with SNO 123456 is INSTL Status.
    Now question.
    1. In 1st place how system allows the Goods issue for particular reservation with different serial number?
    2. Without issuing the serial number 123456, how the status changed to INSTL???
    3. How to solve this problem, need to change the stauts of Material 123456 as ESTO, then i can do goods issue,. how to change the status??
    Regards,
    Saravanan.S

    Hi,
    Ask the workcentre to give that materail with 202 or 262 mvt to you. Now with the new reservation issue the required serial number material to site.
    System does not have the serial number in reservation slip.Manually u are assigning it diuring the MIGO.
    Ramesh

  • Create invoice without receipt

    Hi Financial gurus,
    In My project we dont maintain Inventory in Oracle.
    Will I be able to create supplier invoice and match to PO without receipt - (all are expense and asset items)
    Will it affect my accounting factor (like AP Accrual Account)
    because the accounting entries are like
    1.Receipt
    inventory receiving a/c db
    AP Accrual a/c Cr
    2. Inspect & Accept -> nill
    3. Deliver to stock
    Inventory a/c db
    Inventory receiving a/c cr
    4. PO match Invice
    AP accural db
    supplier liablity a/c cr
    5. enter payment
    supplier liability a/c db
    Cash /bank a/c cr
    Because I am going to do only 4 th and 5th step... will it spoil my accounting AP accural balance..
    Regads,
    DEVA
    Edited by: 882001 on Aug 28, 2011 12:29 AM

    hi
    as u have not ticked invoice receipt and GR based IV in Po system will not consider this PO for invoice verification ( but u can post GR  same like PO based IV)
    If u want to post IV  u need to cancell material document and then change PO to tick Invoice receipt
    Vishal...

  • Goods Issue & Goods Receipt

    Gurus,
    What standard smartform can be assigned in NACE for Goods issue & Goods receipt slip for multiple items

    Hi ,
    The smartforms program SAPFM07P_SMART can be used for printing goods receipt 'individual' slip using transaction MIGO.
    However this program cannot be used for printing goods receipt 'collective' slip.
    In order to print collective slips, please use output type WE03. The
    processing routine for WE03 selects all items of a material document.In
    transaction M708 or in the following customizing:
    Materials Management
       -> Inventory Management and Physical Inventory
          -> Output Determination
             -> Maintain Output Determination Procedures
                Activity: Conditions: Procedure.
    Please use requirement 173 for WE03 so that a collective slip will only
    be printed once for a material document. If you have no requirement for
    output type WE03, you will have a collective slip for each item.
    Also maintain Version for printing of GR/GI slip as '3' Collective slip
    in transaction OMBR for Tcode MIGO.
    In the customizing for "Maintain Output Types" or M706 the standard form
    is WESCHEINVERS3 should be assigned to the output type WE03 under the
    "Processing routines".
    Also please refer to the following useful notes for additional
    information:
    522591 FAQ: IM output determination
    426554 Check list for output determination for goods movements
    411013 Additional documentation on output determination in MM-IM
    Regards,
    Jana

  • Relationship between Goods Issue, Goods Receipt & Invoice Created

    Hi Friends !
    Facing issue in Prod.
    In production, where goods receipt quantity reverts back to 0 in BW after when the invoice is created in SAP. This is after BW was already updated with the correct GR quantity and the delivery complete flag.
    Step          DOC_NUM     DOC_ITEM     SCH_LINE    ENT_DATE    PSTNG_DAT  COMPL_DEL   GI_QTY     GR_QTY
    Initial load          0005051554     000300     1     01/21/2011     00/00/0000              0     0
    Change 1 - Goods Issue     0005051554     000300     1     01/21/2011     00/00/0000              0     0
    Change 1 - Goods Issue     0005051554     000300     1     02/14/2011     00/00/0000              53     0
    Change 2 - Goods Receipt     0005051554     000300     1     02/14/2011     00/00/0000             -53     0
    Change 2 - Goods Receipt     0005051554     000300     1     03/08/2011     3/8/2011        X         53     53
    Change 3 - Invoice created     0005051554     000300     1     03/08/2011     3/8/2011        X        -53     -53
    Change 3 - Invoice created     0005051554     000300     1     03/21/2011     3/21/2011        X         53     0
    Issue : Last record change 3 should have GR_QTY = 53.
    Please help how Goods Issue, Good Receipt & Invoice are linked together. Also advise what should be the expected result. How to proceed further. Thanks.
    With Regards
    Rekha

    The values for Change 3 are as per standards.
    i.e. That is how the system functions.
    Ex: Your Order Qty can be 100 & you can Receipt only 50 if you want to.
    Now, GR_QTY = 50.
    Coming to Invoice, you can invoice even 100 if you want & then receipt the remaining 50.
    If you are Invoicing the full PO quantity, Goods Receipt will be 0.
    If you see the field Transfer Process or Transaction Key (BWVORG), it would be clear for you.
    For PO creation the value is 1.
    For a Goods Receipt the value is 2.
    For an Invoice Receipt the value is 3.
    Record with the different Process Keys, will signify the action taken on the PO.
    When you mark 'Delivery Completed', you are telling the system that we do not require more of this particular material.
    So, if you have ordered 100 Qty & receipted & invoiced only 50, & then you mark the Delivery Completion, you will not be able to receipt more of that material for this PO.
    (It might sound a little confusing. If you can get some help from your MM consultant, it would be great.)

  • Restrcation good's issue without reservation no.

    Hi All,
    I want restricted If material having reservation system not allow to  good's issue same material without reservation. For Example:- I have the material stock 10 qty. I done the reservation material with movement type 201. When I am doing good's issue directly without reservation system stop the issue now system allowing show problem is when issue with reservation system showing Deficit of SL Unrestricted-use 1 M : 506796 1001 0001 because someone already issue same material without reservation I want put check how to pls. guide me.
    Thanks and Regards
    Rakesh

    There is no such control. material can be issued with out reservation also. such setting is no possible.
    If required  go for ABAP development.

  • I have deleted all my videos songs and photos from my iphone 4 but when i connect to itunes it still shows 17gb free. how can I solve this issue without restore. Total storage of my iphone is 32 gb.

    I have deleted all my videos songs and photos from my iphone 4 but when i connect to itunes it still shows 17gb free. how can I solve this issue without restore. Total storage of my iphone is 32 gb.

    I don't see an issue, but if you mean why didn't you get most of your memory back you need to see what else is using storage. Go to Settings/General/Usage. Wait a bit for it to calculate storage allocation, then when it finishes you can see how much storage each app uses.

  • Customisation of goods issue,goods receipt,transfer posting,stock transfer

    hi,
    how to do customisation of goods issue,goods receipt,tranfer posting and stock transfer.
    thanks
    katrina

    Hi,
    You can do customization in following;
    SPRO > MM > Inventory Management and Physical Inventory > Goods Issue / Transfer Postings
    - Create Storage Location Automatically
    - Set Manual Account Assignment
    - Define Screen Layout
    - Maintain Copy Rules for Reference Documents
    - Set Up Dynamic Availability Check
    - Generate Physical Inventory Documents for Goods Movements
    - Allow Negative Stocks
    And SPRO > MM > Inventory Management and Physical Inventory > Goods Receipt
    - Set Tolerance Limits
    - Create Storage Location Automatically
    - Create Purchase Order Automatically
    - Set Manual Account Assignment
    - Define Screen Layout
    - Maintain Copy Rules for Reference Documents
    - Set Dynamic Availability Check
    - Set "Delivery Completed" Indicator
    - Set Missing Parts Check
    - For GR-Based IV, Reversal of GR Despite Invoice
    - Set Expiration Date Check
    - Price Differences for Subcontract Orders at Goods Receipt
    - Activate Storage of Incoming Documents

  • Goods issue without sales order

    Hello experts,
                       1)  Goods issue without sales order (movt type 251) in T.code "MB1A"*
                               Accounting entry:- Change in stock of Fin. Goods A/c    Dr.
                                                                          To Stock of Fin. Goods A/c
                       2) Customer Invoice through T.code "FB70"
                             Accounting entry:-     Customer A/c   Dr.
                                                                 To Sales of Fin. Goods A/c.
    We are temporarily not implementing SD module, i am entering Sales transaction data. Are the above two accounting entries correct in respect to "Goods Issue" and "Customer Invoice" ?
    Regards
    Ashwin

    Thanks a lot, but if you could please tell me what impact will on the balance sheet? will the stock be reduced after goods issue
    For eg;
             Change in stock of F.G A/c Dr.    200
                           To Stock of F.G A/c               200
             Customer A/c Dr.     200
                     To Sales of F.G       200.
    Is this correct? and i have assigned cost center to "Change in stock of Fin. Goods.
    Ashwin

  • Post Goods Issue without reference to order

    Dear All
    We are using both Account and Costing Based COPA. We do post goods issue without reference to order. Now our problem is that at the time of post goods issue there is no Profit Analysis document posted in the system  and Profit Segment field is not modifiable. We have marked the field profit segment optional in movement type 601.
    Please let me know what can be the problem.
    Regards
    Farhan Qaiser

    Check the field status variant on GL (OBC4)

  • MRP & Days of Supply without receipts on MD07

    I have found this configuration for DOS "with" receipts and the two columns on MD07 in ECC 5.0.  Does anyone know of anyway to modify the DOS "without" receipts as it currently shows only unrestricted inventory (excludes QI and Blocked) and our management wishes it to include QI.  Any guidance is appreciated as my research indicates it is not configurable and system determined.
    Tim

    Hi,
    I guess you're referring to the column StckDS - Stock Days' Supply Without Receipts in MD07, if yes, then wish to keep you informed, SAP does consider QC stock. I just carried out a small test at my end & the results support my statement.
    Kindly do check again & if for any reason you're not able to resolve it, then do upload a screen shot of MD04 & MD07 for the specific mtl for me to have a look.
    Regards,
    Vivek

  • Expense report without receipts and justification go through audit

    Hello,
    can anyone advise on how to force all expense report to go through audit process? I have tested that expense item without receipts and justification will be auto-approved by the system.
    Thanks.

    Did you ever find a solution to this question? My internet expense templates are set to receipts are required for CASH and CREDIT CARD over a certain amount. Also, internet expense setup and admin is set to place the report on hold if receipt has not been received. I ran the Expense Report Export and they imported even though receipts were not received. Thank you.

  • Views Table (Goods Issue & Goods Receipt)

    hi experts,
    i need to create a report on goods issue & goods receipt (from inventory module)...i have create a views on sql server to merge the two table IGN1 & IGE1 but to update this report i need to alter the views to update the reports...
    How can i do this automatically at crystal report....
    Thanks a lot...
    john

    Hi Jon,
    Please post your query in the SAP Business One Reporting & Printing forum
    [Reporting and Printing;
    Regards,
    Rakesh N

  • When trying to log in with my primary Apple ID and password, I am continuously asked for my pass word without being able to log in. How can I solve this issue, without creating a new Apple ID?

    When trying to log in with my primary Apple ID and password, I am continuously asked for my pass word without being able to log in. How can I solve this issue, without creating a new Apple ID?

    Chewning wrote:
    I saved some of my music to a Cloud I can't access. Now, they show up as "Purchased" in iTunes, and I'm not given the option of re-downloading OR repurchasing them.
    Music purchased from the iTunes store is not stored in your personal iCloud account, and an iCloud account is not required to redownload them.  You should be able to redownload them as explained here: http://support.apple.com/kb/ht2519.  If you are unable to, contact iTunes store support for assistance by going to https://expresslane.apple.com ; click ‘iTunes', and then 'iTunes Store', then 'Purchases, Billing & Redemption'.

Maybe you are looking for