Material transfer one company code to another company code

Dear All,
I want to transfer some items to one company code to another company code. Please suggest me the process.
Regards
Vimal
Note : Please search forum before posting.
Edited by: Jeyakanthan A on Dec 26, 2011 1:25 AM

This has been discussed on this forum million times...please search on this forum before asking generic query....
inter company code material transfer

Similar Messages

  • Transfer material from one storage location to another storage location

    Is there any bapi  to transfer material from one storage location to another storage location

    Hi,
    You need to use the below BAPI
    BAPI_GOODSMVT_CREATE
    Regards
    Sudheer

  • Transfer One Sales Order to Another SO-How to do?

    Sap gurus,
    How to transfer one Sales Order to another SO? Kindly give me the T.code and Procedures
    Regards
    kalpana

    Dear Kalpana
    Not sure if I am correct.  You want to copy the datas from one sale order to another.
    If so, in VA01, you have the option "Create with reference".  You can choose this option and copy the datas.
    If this is not your requirement, please enlighten more on this.
    thanks
    G. Lakshmipathi

  • Problem arise during transfer of material from one company code to other co

    Dear CONS
    While doing transfer from one company code to other company code by using movement type- 301 ( direct one step) we got one error message '' Field Bus. Area is a required field for G/L account  JDPO 16020202
        Message no. F5808
    Diagnosis
        The value for field "Bus. Area" in the interface to Financial Accounting
        is an initial value but you are required to make an entry in the field
        selection for G/L account "16020202" in company code "JDPO" linked to
        the field selection for posting key "21".
    PL. SOLVE IT WHERE IS THE SETTING.

    no, the system is not accepting the GL ACCT. as it is a balace sheet account. pl. help.
    Edited by: nirupama swain on Sep 23, 2010 7:00 AM

  • Sending material from one subcontracting vendor to another vendor

    Hi Experts
    we have a scenario we have more than one subcontracting vendors.so the unused raw material should be send to one vendor to another.so how can we configure it.please give me feedback.
    Thanks in advance...

    Hi Madhu ,
    What do u mean sending unused material from one vendor to another ?
    In subcontracting u can send material to only one vendor at a time.
    Regards
    Ramesh Ch

  • I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive ,what program  can I used  to transfer one hard-drive  to another  hard- drive  on this mac pc.

    I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive
    ,what program  can I used  to transfer one hard-drive  data to another  hard- drive  on this mac pc.

    The Disk Utility, Carbon Copy Cloner, SuperDuper, or similar software. For best results, place the second drive inside the computer or in a FireWire enclosure and boot the computer from it before removing the internal drive.
    (66989)

  • Asset transfer one business area to another(Required Source B. Area)

    Dear All,
    As mentioned in below link i done all the settings process it is working fine http://scn.sap.com/thread/1748457.
    here thing is i am unable to find Source B.Area in asset master report how can i get the source B. Area in asset history sheet.
    Ex: I have transfer One asset from B.Area: 0001 to 0002 Transfer entry generating automatically. up to now it's good here problem is when i run AR02 asset history report system is showing business area 0002 only(Current B.Area), it is not showing B.area: 0001(From which business are asset was transfer the asset .
    How can i get the Both business area From B. Area(Source B.Area) and To B. Area(Target  B. Area) in the asset history report kindly help to get the Source business area.
    Thanks & Regards,
    Sreehari Tokala

    Hi Jaya,
    we need to maintain the screen layout rules for the asset master data for the above issue.
    Path: SPRO, Financial Accounting, Asset Accounting, Master Data, Screen Layout, Define Screen Layout for Asset Master Data.
    Double click Define Screen Layout for Asset Master Data.
    Select your screen layout and double click "Logical field group" folder.
    Then double click on "3 Time dependent data" and double click "Field group rules".
    Here maintain the rule for business area exactly as it looks like for cost center.
    Hope this helps you....
    Regards,
    Sreekanth....

  • How to transfer material from One HU strorage location another HU location

    Hi Guys
    Is there any procedure to transfer material Box from one HU storage location to another HU storage location
    thanks in advancve

    Hello,
    No you are wrong Vishal. We can use HUMO for HU movement. In the detaili of report screen of HUMO t-code, select the data and go to header tab "edit". You will get multiple option to do the transaction related to HU movement.
    Thanks
    Milind

  • Transfer of material of one profit center to another

    Hi,
    my client has a scenario the material procured belongs to one profit center but its consumed for another profit center,
    pl. tell me how to handle thsi scenarion in standard SAP,what steps to be configured and the MIS reports.
    points would be awarded.
    thanks in advance,.
    ciao
    sriram.p

    my problem is solved using the Document spilitting and zero balancing method.
    regards
    sriram.p

  • Transfer stock vaule of material from one profit center to another one

    Hello All experts,
    in our system (SAP 470) there're some materials which need to change the profit center in their master data. these materials still have stock values. after change the profict center, we want transfer the stock of old profit center to the new profit center.
    is there any way to do that?
    Thanks you very much
    mavis

    Hi,
    i still have some concerns about the creating new materials solution because we have to create the following relevant things:
    SD: condition record
    MM: infor record
    PP: new BoM
    we have 25 materials which will change profit center, there're a lot extra works we need to do.
    Is there any other way we can try?
    Regards

  • How to transfer one BP balance to another ?

    Hi All,
    I just  want to transfer balances of obe BP to another , howcan i do it ?
    Regards
    Ankur

    Hi Ankur, there are different ways to handle this depending upon your need. One way wud be to create a new BP and select the same in both the BP under payment consolidation , or what you can do is, first make payments for your old BP so that the open invoices are closed and then pass a JE.. Hope this helps.
    Regards,
    Joseph

  • How to transfer one itunes library to another itunes already synced with some other device?

    i have two laptops. both are authorized for use with my ios devices. one is authorized for use with my ipod nano 5th generation and the other one is authorized with my ipad3 and iphone 5. i am manually managing the itunes in my 2nd laptop in case of my iphone. now what i want is to transfer my ipod library from the 1st laptop to the 2nd laptops itunes and deauthorize the 1st laptop. is that possible? please help, as it is getting harder for me to manage two itunes in two different laptops.

    See also Recover your iTunes library from your iPod or iOS device, particularly if you want to change the library the iOS devices sync with. If you already have all the media in both libraries but want to recover playlists, ratings and play counts from a device into the "wrong" library my scripts ImportDevicePlaylists and SyncStats may be useful.
    tt2

  • Movement of material from one S.Loc to another S.Loc (both are WM managed)

    Hi,
    When i transfer the material between s.locations (both are WM managed) TR itself is not getting created and i checked all the necessary configs and everything seems to be correct. But the strange thing is if i check in LS24 the stock is placed in interim storage type where as TO is not created also TR is not created as our process is TO will be converted automatically from TR.
    Any light on this issue will be much appreciated.
    Regards
    Sudhakar

    Hi Sudhakar,
    Check if Auto TR is enabled for the Movement type, if you need to have the TR information - disable this setting in  OMLR. Else Goto LT10 and move the Goods from Interim location to the final bins.
    Let me know if this helps.
    Thanks

  • Problem issueing material from one WBS element to another

    Hi Guys,   This is my first post so be kind.
    Our projects during their life cycle change their WBS element sub number.   Example New project starts with WBS element # E.7029.00.010  at some point in the project it moves on to the next level and the WBS element changes to E.7029.00.020  later in the project it will again change to E.7029.00.030.  Ok you get the idea.
    Now the problem.   When the project is at the .020 level we purchase inventory and recieve it into project inventory under the WBS elemement E.7029.00.020.
    Now the project has moved on to E.7029.00.030 and we want to create a production order to make a prototype.  The WBS element for the production order is E.7029.00.030  but the inventory is still under WBS element E.7029.00.020.  When we go to issue the material to the job it says there is none in inventory under WBS E.7029.00.030. Which is right it is all under E.7029.00.020. 
    Is there a way that we can store the inventory under E.7029.00 and be able to issue it to any sub group of E.7029.00 so that it would not matter if the current WBS is E.7029.00.020 , E.7029.00.030 or E.7029.00.050?
    Since our BOM's can be quite extensive and often contain a large number of new components this would be of great assistance.
    Thanks for your time and consideration.

    The project moves on to another stage.   During the development of new products the project goes through several stages before the new product is released for production and sales.   For example:
    Stage 10 - concept
    Stage 20 - initial design
    Stage 30 - design refinement
    Stage 40 - Bata testing
    Stage 50 - Final design
    Stage 60 - Production process design
    At each of stages 20 - 50 changes to the BOM can occur.  Material would be purchased at stage 20 and could continue to be used through the rest of the stages including after release to production.   But if the material is purchased during stage 20 then it sits in inventory under the WBS element ending in 020 but when the project moves on to the next stage the material will  be used to produce prototypes for stages 30 - 60 as long as the material is included in the BOM at that time.

  • Can a plant material valuated from company code to other company code ???

    we have a lot of ships(plants) and the ship here defined as a plant with it own storage locations .
    we have three company codes some ships are assigned to one company code and after a period of time it rented to other company code with its storage location........and the inventory go from one with its plant from company to another....
    can i handle this case ?

    we can transfer material from one company code to other company code, One Plant to other Plant & one storage Location to other storage location . if material is valuated then accounting document will get generated while GR . material l price will get updated for new plant/ company code
    Depends on your valuation type whether it is company code or plant
    Regards,
    Jyoti

Maybe you are looking for