Material valuation(standard price issue)

Hi Gurus,
We have some issue in material master record accounting1 view.The standard price for the period 1 of 2010,period 2 of 2010 is showing the value of 1000 correctly.but where as coming to material valuation table(MBEW)it is showing as the value of "1".But where as coming to material ledger the standard price is showing as 1000 correctly.due to the inconsistency data between material valuation and material ledger the system is not allowing to post any transactions.Suggest on this issue.
Thanks in advance
Jana

Hi Janardhan,
The Material Valuation Table MBEW will be updated, if you have completed both Marked and Released activities for the Material through t-code-CK40N for Mass Materials or CK11N and CK24 for Individual Materials. As per your data, in your case this was completed and price was updated for 01 and 02-2010 periods. If you run CK40N-Standard Cost Estimate for Legal/Group/Profit Center valuation and completed till u201CMarking of Priceu201D i.e., but not executed the activity u201CRelease priceu201D. It may be for period 03-2010, the Material Master>Accounting view will be updated with standard price and also Material Master>Future Price field will be updated with u201CMarked Priceu201D, but Current Price/Previous Standard Price fields will show earlier values. Till you u201CRelease the Priceu201D through t-codes CK40N or CK24, this differences will continue. At the start of March 2010 period, if you u201CRelease the priceu201D, all the fields in Material Master will be updated with relevant Current/Previous Standard Price fields. I hope this will clear your doubts. If you need more clarity in this regard, please let me know.
Regards
appalas
Edited by: appalas on Feb 28, 2010 1:11 PM

Similar Messages

Accounting Entry for Material has Standard Price

Hi,
If Material has standard price option, what is the accounting entry for the time of Direct Goods Receipt and from the production.
Material Value is : Rs. 100/-
Purchased value is : 90/-
from production : 110/-
Thanks in advance

Hi,
In STO, material posting with price valuated from issuing plant price. In your case, the transportation cost, you can capture to separate G/L account and pay to transport vendor.(In STO , one plant is vendor and another plant is customer, so a third party vendor involved for material transfer)
OR else use separate own Custom Condition Type with Special Condition Category instead of condition type P101 which have Condition Category "G", only responsible to pick the internal price
Regards,
Biju K

Cost Run for Raw Material taking Standard Price instead of Moving Price

Hi all,
We ran a material costimate with normal components FG>SFG>RM. The RM price Control is set to
V (Moving Average Price) and for SFG & FG it is S(Std. Price). After we run CK11N, the price for
RM in Material Master changes as per Moving Price. We found that the RM Component is
costed based on Standard Price and not on the previous cost run Moving Average Price. After
certain period, if we again do cost run, the sytem is again picking up the standard price for costing
not the revised Moving Price. We have checked the Valuation Variant in the Costing Variant, where the strategy given is 1. Moving Average Price 2. Standard Price. We also tried to change the
sequence as 1. Price as per Purchase Info Record 2. Moving Average Price and 3. Standard Price and
also 1. Standard Price and 2. Moving Average Price. Our requirement is when we run the cost estimate the raw material has to pick the price of previous moving price stored in the Material Master. Kindly tell us where to set the indicator.
Thanks,
Sadashivan

Hi Srikanth,
Problem solved. I checked the sequence in Valuation Variant and modified in Valuation Variant for Plant which I have not set previously and now the system is working correctly.
Thanks,
Sadashivan

Material Master - Standard Price

Please suggest - how to change(update) the "Standard Price" of the material in Accounting view of the Material Master ?

Hi,
(do reward if this is useful)
Price Update:
In the R/3 menu go to the screen view by the following path:
Accounting-Controlling-Product Cost Controlling -
Product Cost Planning MaterialCosting----
Price update
On the Price Update: Mark Standard Price Screen, choose Other Prices.
The Other Price Update: Release Other Prices screen appears.
Enter data to restrict the cost estimates whose results you want to copy to the Material master
In the Update Prices in Material Master Record group box, set the Commercial Price 1 checkbox.
Choose Execute (F8) to carry out the update.
On the Price Update screen, the system provides a short log for the test run. The log contains green traffic lights and the message Of 1 materials, 1 cost estimates were updated successfully.
Choose Back until you get to the Price Update: Release Other Prices selection screen.
Use the same selection parameters as in the test run for the price release. Scroll down to the bottom of the screen. Deselect the Test Run indicator in the Processing Options group box.
Update the prices in update mode and choose Back.
Call up transaction MM03 and check that the prices have been updated in material master C10150.
The lowest value is determined in inventory costing when the prices are updated in the material master record. The system compares the valuation price according to price control for the current period or previous period with the costing result. If the valuation price is lower, this price is updated, rather than the value determined in inventory costing, as the tax or commercial price.
Result
Commercial price 1 has been updated in the Accounting 1 view in the material master.
<<<PLEASE REWARD POINTS IF THIS IS USEFUL>>>

Regards
AK

Material and standard price.

Hi,
could be a material managed without any standard price ?
Best regards

Hi,
If I understand ur question, then answer is "YES".Like you procure non-valuated goods. Not required any valuation class or price control in accounting views.
If helpful then reward.
Regards,
Biju K

How can i update material master standard price.

Hi Everyone,
i would like to know if there is any way i can update my MM Std Price everytime i make any purchase.
I.e i have std price 40, but next time when i make PO and update Inforec for 70 so i want this 70 also take effect in my material master. Is any expert can tell me about this functionality or any alternate. would be great help
Ali

If you are using std prices then these do not vary unless someone is manually changing them (or using a program to do this). That is the main point of std prices, they do not change unless you change them yourself.
MAP and standard prices are used in material master and it has nothing to do with price with which you will sell your customer.
MAP and Standard prices will just hit you inventory account and COGS account once you will do PGI.
I am assuming that you are talking about the price at which you sell to your customer.The easy way of tracking changing prices is that you can make them manual conditions and based on your information you can put them manually in your sales order.
It is not recommended to change standard price constantly. At this period end, modify the standard price in material Master & continue.
This can be a regulr activity at period ends, say every month end or quater end or half yearly or yearly. In general it is prctices on yearly basis, but as per the requirement you can consider the period.
Just go throught the links given below
http://www.sap-img.com/materials/purchasing-tips.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMIVMVAL/MMIVMVAL.pdf
Primarily, You cannot maintain both Standard Price & MAP. You can maintain only one of it.
It is recommended that standard price should not be changed at randomly, but as a policy, if required, it should be changed at period end, say monthly, quaterly, Half-yearly or yearly.
You can also check out transaction CK40N
reward points if it helps
regards
Biju

Material master standard price exchange rate in accouting view

Hi
Our company code local currency is MXN
When i goto material master/Accounting 1 view i can see material standard cost in MXN and USD
which exchange rate does SAP uses, where is is defined in config
it is not using exchange rate type M
Thanks
Edited by: Sasi nagireddy on Nov 30, 2011 7:53 AM

Hi Sasi,
The currency in material master will be by default the Co.Cd currency as per your FI configs. Local currencies can be defined as per requirement which you can utilize for various purposes including valuations. The exchange rates which your FI consultant has defined will be prevalent as per OBBS and OB08. Check with your FI person to help you resolve this issue.
Follow this link for better info..
http://wiki.sdn.sap.com/wiki/display/ERPSCM/MM-IV-GF-CUR+Currency
Regards
Shiva

Material valuation with respect planned price 1 in material master

Dear All,
     The costing variant PPC1 has been used for released cost estimate. In my scenario I want to create one more variant say ZPC1 where to calculate the value of the material from the planned price 1. In this case
1.     What should be the validity date mentioned in the material master for valuation
2.     The variant has been configured as
a.     Costing Type 12 Mod Std cost Est
i.     Price Update No Update
ii.     Save Parameter With Start of Period
iii.     Misc Cost Sheet
b.     Valuation Variant 001 Planned Valuation
i.     Material Valuation - Planned Price
ii.     Standard Price
c.     Date control
i.     From Date : Start of Current Posting Period
ii.     To Date : End of Current Posting Period
iii.     Qty Struc Date : Current Date
iv.     Val Date : Current Date
d.     Qty Structure Control (As PPC1)
3.     When I run the standard cost estimate with variant ZPC1 the system calculates the standard price of the material even when the price is mentioned in the planned price1.
How the variant should be created to capture the planned price for calculation when using the variant ZPC1.
Kindly help me in this regards
Regards
Vasantha

HI,
The requirement is to execute the cost estimate quaterly for planned price 1.
So we are planning to create separate costing variant to pick the planned price 1 of RM.
Clinet has the Excel file with the details of RM and Price combination but the prices are not available in SAP.
We are looking for the Mass transaction to upload the prices in Planned price 1.
Kindly help.
Thanks,

Report on difference between PO price and Material standard price

Hi,
We need a report on Purchase price difference, which is report showing Open PO price & Material standard price, if there is a price difference
This need to be run every day to avoid buyer changing price at PO level unless there is a valid reason
Similarly difference if any between Schedule agreement price & Material master standard price
Please help

Hi,
There is no standard report available for this.
You need to develop one.
Considering your requirement, it can be achieved with a query as well provided you do not need complex functionality out of the report.
Hope this helps.

Why can't I create a report for standard price by material

Any ideas? All reporting I have tried in SQO1 and even in SE16 returns 0 value for standard prices?
Firstly why is this? and secondly is there another way I can pull a report by material showing standard price?
Points awarded, many thanks

hi,
In MM60, u can get report for materials having standard & moving average price based on ur input in selection screen like material,plant,material type,material group & created by only. As of my knowledge,
there is no option to get list of materials with standard price in std.SAP.
There are two options to generate report for materials with standard price.
1. It is better go for customization . selection screen must contains price control field. if u enter price control like 'S' or 'V' in intial screen , report is generated.
2. create a ABAP query for this.
I hope this info is helpful to u.

Standard price comes from material master

Dear All
How to get Material master standard price into purchase order instead of Purchase Info record.without creation P.R
best regrads
R.T

Hi,
That can be possible.. Pl go throgh the below process..
IMG- MM- Purchasing - Conditions- Define price determination process-
Define condition type- Select ur condition type(PBXX or PB00)- In condition there is option "Cond.Category" here put T or S.
Then create PO system automaticaly pick ur MAV or standard price from Material master.
Arun

Material valuation/price: 0COPC_C04 and 0COPC_C04 (cube), 0COPC_O01 (ODS)

Hi BW experts,
could anyone share inside information about the usage of 0COPC_C04 (cube), 0COPC_O01 (ODS) for material valuation and price?
I am wondering if it would be just to use 0COPC_C04 (cube) with data updated from info sources
0CO_PC_ACT_02,
0CO_PC_ACT_03,
0CO_PC_ACT_04,
0CO_PC_ACT_05,
0CO_PC_ACT_06,
0CO_PC_ACT_07
Thanks for your help in advance!!!
Regards,
Sally

any feedback for these questions?
Thanks!

HALB moving or standard price

Dear Experts,
If a material is a HALB category ..... is in house production and also send if for job work outside ..... it is maintained in in standard price or moving avg price ?
Regards,
Prakash
Moderator: Before you post: Rules of Engagement

Dear Sir ,
U try to under stand I produce a material then after which is a semifinished goods under category HALB
Then after job work required , so i send it to outside ans for this i created a service order
Now the material is standard price or moving avg price
I am confused this thing because in finished goods in material master we given valuation class 7920 , Price standatd pricce *****
category is FERT
In case of raw material valuation class 3000 Price moving avg price ******* , category is ROW
Which price we given the above material which is HALB category and valuation class 7900 ,And i think price is both moving avg & standard
Kindly tell
Thanks,
Sahoo

Moving average price & Standard price

Hi every body
For one material some times we use moving avareage price and standard price for that material
Which scenerio we use this & why we have to use this,can any body explain me
Thanks

Hi Tarun
Both, Moving average Price and Standard Price are Price Control Indicators.
It Indicates the price control used to valuate the stock of a material.
Standard Price : It is a constant price at which a material is valuated without taking goods movements and invoices into account. It is normally used for finished Products - Fert ( Vlauation Class - 7920)
Moving Average Price : It is a price that changes in consequence of goods movements and the entry of invoices, and which is used to valuate a material.
The moving average price is calculated by dividing the value of the material by the quantity of material in stock. It is automatically recalculated by the system after each goods movement or invoice entry.
It is Normally used for Raw Materials -- ROH ( Valuation Class -3000)
Rewards points ,if usefull
Regards
Palaniappan

IDOC message type use for standard price ALE

Hi,
Does anyone know what is the best way to send material master standard price data from one SAP box to another SAP box?
ex. SAP box A will send standard price data to SAP box B, and the way to update the standard price data in SAP box B, can be done with what method?
I am thinking to use ALE, to send stanard price data and then trigger a MR21 transaction is the receiving box to update price. Does anyone know what IDOC message type I should use to transfer standard price data? thx.

Hi
I think the IDOC type will MATMAS01.
Thanks
Deepak

Material valuation(standard price issue)

Similar Messages

Maybe you are looking for