Material valuation with respect planned price 1 in material master

Dear All,
     The costing variant PPC1 has been used for released cost estimate. In my scenario I want to create one more variant say ZPC1 where to calculate the value of the material from the planned price 1. In this case
1.     What should be the validity date mentioned in the material master for valuation
2.     The variant has been configured as
a.     Costing Type – 12 Mod Std cost Est
i.     Price Update – No Update
ii.     Save Parameter – With Start of Period
iii.     Misc – Cost Sheet
b.     Valuation Variant – 001 Planned Valuation
i.     Material Valuation - Planned Price
ii.     Standard Price
c.     Date control
i.     From Date : Start of Current Posting Period
ii.     To Date : End of Current Posting Period
iii.     Qty Struc Date : Current Date
iv.     Val Date : Current Date
d.     Qty Structure Control (As PPC1)
3.     When I run the standard cost estimate with variant ZPC1 the system calculates the standard price of the material even when the price is mentioned in the planned price1. 
How the variant should be created to capture the planned price for calculation when using the variant ZPC1.
Kindly help me in this regards
Regards
Vasantha

HI,
The requirement is to execute the cost estimate quaterly for planned price 1.
So we are planning to create separate costing variant to pick the planned price 1 of RM.
Clinet has the Excel file with the details of RM and Price combination but the prices are not available in SAP.
We are looking for the Mass transaction to upload the prices in Planned price 1.
Kindly help.
Thanks,

Similar Messages

  • Locate Materials with Future Planned Price

    Hi All,
    I have a user who did costing run in between of the month to change the Standard price from next month and Marked the prices for next month but forgot to note down the Material numbers.
    Now, the problem is in the month of July'14 when CK24 is executed for release no materials are coming up. It is possible that the Costing entered is for the month of June'14.
    Is there any report by which we can locate materials which Future Planned price and period and Current Planned Price and Period.
    Regards

    Hi,
    It is  very simple,
    You will get all price results in the table MBEW:
    For your query relevant field is : ZPLPR.
    Go to SE16: MBEW table and provide the input of your plant and execute.
    Check whether there are any entries in ZPLPR,
    If you find entries in that filed means materials marked for the estimate but it was yet to be released.
    you will get the total list of materials.
    Please find the relevant tables and fields to get the prices in the material master:
    Let me know if you find any difficulty to get the values in the table
    Regards,
    Pavan Kumar Arvapally

  • Material master price, inforecord price and GR

    Hi gurus,
    Can annybody please clear my confusion. On the PO the price that is proposed is from the inforecord. When we receive the PO, what is the price at which the stock will be valuated? is it the material master price or the inforecord price? if we change the price on the PO after the inforecord has proposed the price, will the GR be valuated at the changed price of the PO. Please expolain
    Thanks
    ANusha
    Edited by: anusha vemulapati on Jan 19, 2010 8:11 PM

    the GR is valuated according to the price control set in the material master. if the price control is standard price, then the GR is valuated with the standard price, no matter what price the PO has.
    in case of moving average price: if the goods receipt is executed before the invoice receipt, the goods movement is valuated with the purchase order price. If an invoice is already posted, the system uses the price of the invoice. If a partial invoice is received, the partial quantity corresponding to the invoice is valuated with the invoice price, the rest is valuated with the purchase order price.
    if you change the price in the PO before you do a Goods receipt (and before you post an invoice receipt), then the GR is valuated with this new entered price.
    how the price in PO is determined can be read in OSS Note 456691 - FAQ: Price determination in purchasing

  • PuP price not changed in Material master

    Hello All experts
    I have one question about the material ledger related transaciton, I have a Material with 2+V (price deter. and price control) setting in Material master data in Accounting 1 TAB. And material ledger is active for this material, the Periodic Unit price is 1 USD in current period and stock is 0.
    One PO posted for this Material for purchase with actual price 100 USD, and 101 movement type with special stock indicator E was used in Goods receipt posting. I think these stock will be treated as valuated sales order stock. But GR posting didn't trigger any PuP price change in Material master. Is that situation normal? Pls kindly help.

    With price control V in activity-based material price determination (indicator2 in the material master), the moving average price is calculated. With price control S, the material is valuated with the standard price and the moving average price is calculated for information purposes.
    In single-/multi-level material price determination(indicator 3 in the material master), the valuation price (standard price) remains unchanged and a periodic unit price is calculated for the closed period.
    This option is only for materials with price control indicator S,and is only recommended if in addition to multiple currencies and/or valuations, you use single-/multi-level material price determination.
    In single-/multi-level material price determination, a periodic unit price is updated for information, but it can only be used for material valuation in the closed period.

  • Production order variances not updating in material master

    We have activated Material ledger-
    Price determination selected-2(transaction based)
    Finished goods standard price--832.50
    Price control in material master-S (Standard Price)
    Variances per kg: 265.50 is shown in Moving Price field in Material master-
    Why it is not adding to standard Price-
    How to add 265.50 per kg(variance) and increase the Finished goods valuation (in the balance sheet)
    Thanks in advance
    Joseph David

    Hi,
    After activating ML, if you maintain FG Material Price Control-S with Price Determination-2, the shown Moving Average price is ONLY FOR STATISTICAL/reporting PURPOSE, The goods movements and Material Inventory valuation will not be updated/valuated with Moving Average Price, it will still be done as per Standard Price only.  If you want to get the full advantage of  ML activated realistic/actual valuation of your inventory and goods movements, you need to change the Material Price Determination to u201C03u201D. Then as per SAP standard ML process, preliminary valuation for the material will be u201CStandard Priceu201D and all Price differences will be accumulated in ML categories and after period/month-end activities, the goods movements and inventory will be evaluated with u201CPeriodic Unit Priceu201D i.e., averaging by taking into consideration all Material Price differences.
    Regards
    appalas

  • Split valuation for  material with two different price indicator S and V

    Hello Gurus,
    Is it possible to maintain split valuation for same material with two different price indicator S and V.
    For Ex. Material A is manufactured can be manufactured in house ,  procured from outside vendor and can be purchased from subcontracting vendor by providing raw material.
    We want to keep  Price control V for same material " A"  which is procured from outside vendor.
    And price control S for inhouse produced same material " A".
    Besically this material is semifinished and having BOM for subcontracting.
    Please advice.

    Hi
    When the material is split valuated, you maintain the accounting view for the material 1st with valuation category, here the price control should be V.
    When you will extend the material to valuation type "Inhouse mfgd" maintain the price control as S, for valuation type "Procured form outside vendor" maintain it as V.
    Regards
    Prasad

  • Planned price in material master default in valuation price in PR

    Hello,
    I want to default planned price  of material master in valuation price of Purchase requisition,
    Currently MAP is defaulted in valuation price field in Purchase requisition.
    Is this possible by using any user exit?
    Regards

    Yes this is possible .you have to use the BADI    ME_PROCESS_REQ_CUST  and method PROCESS_ITEM  if the PR created manuallly or through MRP. Try this User exit also MEREQ001
    If the PR created through sales order you could use user exit in sales order   program name:SAPMV45A and subroutine : USEREXIT_MOVE_FIELD_TO_ME_REQ in the include MV45AFZB.
    Appreciate if it is helpful

  • Material condition record to bring price with respective taxes

    Dear All,
    I am trying to bring material condition record to bring price with respective taxes of the material in condition type pr00.
    In this case i am not able to post the billing document in to FI
    module.However when i manually enter the respective taxes
    iam able to post the same to FI.
    My doubt here is that can we use taxes along with prices
    or not.
    your immediate resonse to this quiry will be definitely rewarded with good points.
    Best regards,
    R.Srinivasan

    Dear Friend,
    Please explain where did you maintain the record for the PR00 Condition type..and what is the req and Alt base val and requirement you have specified..
    As per Me if you have maintained the taxes along with prices in the material master records in accounting1/2 data then the cost price along with prices will be reflected in the pricing procedure in the cost proce condition type...
    VPRS the internal cost price for the material as per sales order.
    Please correct me if I am wrong and explain the various requirement type and alt base value calculation you have used.
    edited by,
    Amlan Sarkar

  • Production Order GR with Planned Price

    Dear All,
    We are using following steps for production order=
    1) Create BOM, for Semifinished material with Price control = "S"
    2) Create Roting, with all Keys PP01, PP02 and PP03 with Material allocation to respective steps
    3) Standard Cost Estimation using CK11N and CK24
    4) Create Production order using CO10 with Material and WBS Element.
    5) Material issue against Reservation. But the material may be changed after releasing prodction order first time. And Actual issue for the BOM material may be more or less in qty.
    6) Final confirmation with completion of last phase confirmation of production order.
    7) Production Order TECO
    8) Prodction Order Settlement using KO88
    Now my problem is while I am doing final confirmation the GR done is with Planned price (Based on BOM) + Subcontracting charges which it is set with production order while releasing it for the first time.
    Kindly tell me is the system behaviour is correct or wrong?
    We are expecting that GR should happen with the actual material issue price + Subcontracting charges only.
    Please reply.
    Thanks & Regards,
    Vishal Kadia

    Vishal,
    This is for your information.
    If you have production order of 1 EA- Starnadar Price =10 rs
    Raw material cost=5
    Activity Cost=2
    Overhead Cost=2
    So COM=9 rs
    Suppose after production order creation plan cost is 9 rs, hence after confirmation there is no varience (plan vs actual) so actual cost is also the same 9 rs.
    Now as you said if system will go for GR against actual cost, that will post in cost of good mfg account at the time of GR.
    As per std SAP after GR also you can issue the material to that order, hence if you will go for more goods issue of new material against that order (unplanned issue) of rs 5 for the same order then the actual cost will again change (recalculated), but for that oredr material is allready GR with actual cost, then you will not able settle the cost of newwly issued material on that order.
    So whatever the plan and acual cost GR will be done against std price maintioned in material master ( 10 rs)
    This is my understanding.
    Hopes that will clear your dought.
    Tara

  • Backend price update with respect to plant

    Hi SRM Guru's
    Is it possible to update backend price for the material with respect to Plant.
    We are in Classic scenario.
    Currently Report EBP_GET_BACKEND_PRICES updating price for a material  average of all plants from ECC to SRM.
    But we need the price for the material to be updated plant wise.
    Is it Possible.
    Thanks
    With Regards
    Sri.
    Edited by: sri ram on Mar 26, 2009 8:52 AM
    Edited by: sri ram on Mar 26, 2009 11:22 AM

    HI
    first of all you need to make the plant as the valuation area in the ecc and do the delte download for the material master update through CRM parameters.  here you must be very care full about the system.  you need to seleted the delta down in the srm crm paratmeter not initial down load.
    in the delta down load the system will update the current setting in the ecc for the materil. then you will get the exact price for the material what you have sent for the plant.
    Regards
    Satish

  • Inter company PO is not pulling the valuation price from Material Master

    Hi Experts,
    We have a scenario, Inter-company PO with pricing procedure which pulls Material Price from Material Master (Std Price), similar to intra company PO
    Even after maintaining the std price in the supplying plant , system is not pulling the Valuation price from Material master only for a particular Material
    I checked the Plant level attributes ( for ex: Plant Mat status, client level status and everything looks fine )
    Could you guys please mention what would be the issue ?
    Thanks in advance
    Illayaraja

    Hi,
    Is there a routine which pulls the value? then you need debug with ABAP help for that routine where its failing to pull
    Thanks
    Diwakar

  • Restricting issue of goods to cost center with respect to material type

    Dear Users,
    I have a requirement like we want to restrict issue of goods to cost center with respect to material type i.e., we want to issue goods to cost center only through reservation and that too only for specific material types. Is there any standard solution for this, please provide your suggestions.
    Thanks,
    Manoj

    Hi Ajay,
    Thanks for valuable input.
    I also thought in the same line , but user has the following concern on this:
    Assessment Cycle: As per Users, it cannot be used because this will allocate based on allocation basis. But they need, the values that was posted at the time of transaction and as per materials. So it wont be accurate through Assessment cycle,
    OKB9: They have different Cost center for different valuation area for the same GL Account.
    Hence through OKB9 also, we cannot post directly to COPA.
    That's the reason the above option were not adopted.
    My other concern to this is:
    In CKM3, we have two lines under consumption, one for Normal sales PGI and other is Cost Center.
    After doing revaluation of consumption in CKMLCP, we see one line under Cost Center :Revaluation of Consumption Figure"
    My question, where can I see that figure whether in any table or in Cost Center report??
    If that is also available we can try to match those values and post to COPA.
    Let me know your thought on this.
    Thanks and regards
    Kami

  • Valuation with material cost estimate: error with product "117122"

    Hi people,
    We have the error:
    =====================
    Valuation with material cost estimate: error with product "117122"
    Diagnosis
    In Profitability Analysis (CO-PA), the system tried to valuate a line item using the current standard cost estimate.
    In order to determine the current plan period, the system needs to read the valuation segment of the material master.
    The system has found that the current plan period is not filled forproduct "117122" in plant "UBE1".
    We have the follow configuration in trans.: KE40:
    . Determine material cost estimate
       . Transf. Standard Cost Estimate
    . Costing Variant
    . Control Data for Standard Cost Estimate
       . Period Indicator = "Current Standard Cost Estimate acc. to entry in mat master
    . Addiitonal data CO-PC
        . Transfer cost estimate in controlling area currency  "activated"
    We think the reason about our error is because the field above is activated and some configuration more is necessary for this case. For examplo: Trans.: OKYW and this one was not configurated yet.
    Do you know what happend?
    If we need to configure some transation, or sonly process the cost estimate?
    Thanks,
    Rosana.

    Hello Guido
    Thank you very much for your return.
    It is happenning in a Client that some people are doing the configuration.
    Before we didin't have in KE40, the fiel "Transfer cost estimate in controlling area currency" activated.
    And now, the people activate that in this new Client and I don't know the impact about that.
    I think we have to make the configuration in OKYW.
    The other transation you told me, we don't have any information.
    Could you tell me some other idea what happend?
    Message error is just "Message no. KE350"
    Abou claculate the cost:
    It was calculated by trans.: CK11N for future planning and the real wasn't not possible to release because this material already have moviments.
    Could you tell us is there is some thing more to do?
    Thanks,
    Rosana.

  • Automatic convert of planned order to purchase requisition with latest info price

    Dear Friends,
    Our client want to convert planned order to purchase requisition through background job,but they want to pur requisition picking price should be latest info record price.
    how can i map in to sap,is that possible in T.CODE MDUM, pl help on this requirement.
    Thanks &regards,
    Sabhapathy R

    Hi Sabhapathy R,
    The price in the Purchase Requisition is the Valuation Price of the material master.
    If you press F1 in the Purchase Requisition on the field Valuation Price at tab Valuation , you will see the SAP documentation:
    Price in Purchase Requisition
    Shows the price of the requested material per price  unit.
    Use
    The price and quantity set out in the purchase
    requisition determine the value of the purchase requisition item or
    purchase requisition. In turn, this value is applied in determining the release
    strategy for the requisition.
    In Customizing for Purchasing under Purchase Requisition ->
    Define Screen Layout at Document Level, you can set price and price unit.
    The Valuation price field can be set as a mandatory or optional input
    field.
    Procedure
    Input mandatory:
    If a material master record exists for the
    requested material, the price is automatically taken from the valuation
    price field.
    This is explained in several threadhs:
    Info record price not comming in PR after "Assign source of Supply" in PR
    The price of the Info Record will be determined when the Purchase Order is created.
    If you want price to picks from your Info Record when the PR is created, then check for a user exit or BAdI.
    Thanks and Regards,
    Mariano

  • *How to change the Valuation Category & Price control in material master*

    Hello SAP Gurus,
    I have a requirement to change the valuation category from 'X' to '  ' in accounting view of material master.
    -> I have cancelled all the open PO's & SO's for the material
    -> I have ensured that there is no stock for the material in that valuation area.
    But still I get an error message that batch already exists for the material. When I check entries in MCHB I find that there are previous entires in MCHB with zero stock.
    I have gone through the SAP note 155874 which recomends the archiving the effected objects.
    Please let me know is there any work around to change the valuation category from 'X' to '  ' & price control 'V' to 'S'. I also need to change from '  '  to 'X' for a few materials.
    Thanks for your advise.
    Best Regards,
    Narayan.

    Note 155874 cleary describes what has to be done to be able to change.
    There is no workaround, and if you change anything in the tables directly, then this will cause inconsitencies, as described in this note as well.

Maybe you are looking for