Max No of Profiles in ECC6.0

Hi,
312 profiles are in 4.7EE and but how many  number profiles in ECC 6.0.pls provide support doc if possible.
Thanks in advance.

Hi all,
You maight be right but, iam using ECC6, in the USR04 table i  find that the NUMBR OF PROFILES OR AUTHORIZATIONS are maximum 3,578  and minimum 2  please find the details following.....and explain me .....
USER NAME   DATE            TIME         Changed by    Number of Profiles or authorizations
UEXT_AAG     23.06.2009     16:33:53     U1DW_LAU     3.578
U1AT_UNR     19.06.2009     10:20:10     U1DW_LAU     3.542
U6IM_DHD     19.06.2009     10:20:10     U1DW_LAU     3.542
U1AC_NW     19.06.2009     10:20:10     U1DW_LAU     3.530
U1IA_LM     19.06.2009     10:20:10     U1DW_LAU     3.530
U6IM_AP     19.06.2009     10:20:10     U1DW_LAU     3.530
U6IM_MUP     19.06.2009     10:20:10     U1DW_LAU     3.530
U6IM_PW     19.06.2009     10:20:10     U1DW_LAU     3.530
U6SE_BHA     19.06.2009     10:20:10     U1DW_LAU     3.530
U6SE_KJT     19.06.2009     10:20:10     U1DW_LAU     3.530
U6CC_SYH     08.07.2009     10:32:33     U1DW_LAU     2.678
U6CC_QZX     08.07.2009     10:32:33     U1DW_LAU     2.666
U6CC_CG     23.06.2009     10:16:12     U1DW_RPO     2.630
U4AU_APF     02.07.2009     12:58:09     U1DW_RPO     2.618
U6SE_HS     06.07.2009     07:42:20     U6IM_GK     2.594
BTC-OPER     08.07.2009     10:32:33     U1DW_LAU     2.570
U4AU_MAA     23.06.2009     10:16:12     U1DW_RPO     2.570
U1AC_KIJ     06.07.2009     07:42:20     U6IM_GK     2.558
ZHMI     19.06.2009     10:20:10     U1DW_LAU     2.546
U1AT_JP     08.07.2009     10:32:40     U1DW_LAU     2.498
U4AU_JW     23.06.2009     16:33:53     U1DW_LAU     2.498
U1AC_STC     23.06.2009     10:10:56     U1DW_RPO     2.486
WF-BATCH     19.06.2009     10:20:10     U1DW_LAU     38
ALE_BC     19.06.2009     10:20:10     U1DW_LAU     26
BWREMOTE     19.06.2009     10:20:10     U1DW_LAU     26
MRS-CPIC     19.06.2009     10:20:10     U1DW_LAU     26
SAP*     19.06.2009     10:20:10     U1DW_LAU     26
TMSADM     19.06.2009     10:20:10     U1DW_LAU     26
U1DP_IL     19.06.2009     10:20:10     U1DW_LAU     14
U2HU_DS     19.06.2009     10:20:10     U1DW_LAU     14
U2HU_EK     19.06.2009     10:20:10     U1DW_LAU     14
U2HU_GAL     19.06.2009     10:20:10     U1DW_LAU     14
U6CC_WEQ     19.06.2009     10:20:10     U1DW_LAU     14
U4AC_LJ     03.07.2009     10:38:37     U6IM_GK     2
Thanks and regards,
Ganesh.K

Similar Messages

  • Max no of profiles per user

    HI everybody
    An interviewer asked  that you have to assign 10 roles to user,but 9 roles it self the max no of (312) profiles, are reached.then how to assign 10 th role
    what procedure you follow.Of course i have this doubt since sap career started but i was not much interest to find answer
    I read  410993 note  and searched all the stuff  on net but didn't get solution.
    thanks in advance.
    regards
    siddu

    That you have not reached this limit indicates that you are doing a good job!
    Tell the interviewer that if the limit is reached, then there is a design error.
    If the interviewer presses harder, then there are two technical solutions. The first is in the authorizations tab of PFCG to use the "read old and merge new" option via the "Expert options". This you are probably doing hence you don't have the problem, but it can also be triggered manually within the menus in the authorization data.
    There is one more joker you can play, but you must first tell the interviewer that they are using "Edit old data" to support a design error in the way they build and maintain roles.
    Cheers,
    Julius

  • Rough Cut Planning Profile-by Capacity category

    Hai,
    I am creating Rough Cut Planning Profiles in ECC6.0 for use in Standad SOP (S076). In MC35, I don't see a place where I can enter by Work center category- like I want both Machine and Labour categories as I have different times for each category.
    { when I view the rough-cut capacity situation in MC82, system displays both categroies, but it is based on only the hours I maintained for one of the categories- how do I maintain for both categories?}
    Thank you in advance:)
    Sonali
    Edited by: Sonali on Apr 28, 2009 3:05 PM

    Hello Sonali,
    Rough cut capacity planning is used only  for bottle neck resources.Analyze your process and you will come to know for the product group or material which category or machine is bottleneck.
    Create a rought cut planning profile for a production line or Workcenter or PRT or Cost(Relative cost not product cost).
    PS:Roughtcut capcity planning should not be used for all the workcenters.
    Thanks,
    Raj

  • W510 checkered pixel patterns while running on battery [workaroun​d]

    Hey all, got my W510 in the mail yesterday and am quite pleased with it so far, but I have one issue that I've determined to be related to the power profiles.  When using any energy-saving power profile while running off battery power, when I have a flash website (e.g. Nvidia's homepage) open in IE or Chrome or if I move any window around the screen enough, some kind of strange pixel checkering occurs constantly when the screen has too much activity.  It's as if every other pixel gets shifted over by one making what looks like a checkerboard out of all the pixels on the screen.  I can still read the screen, but it makes my head spin.
    If I choose the standard 'Max Performance' power profile, the issue doesn't manifest when running on the battery.  If I choose any of the others or create my own profile to mimic the Max Performance profile, I still get the checkers.  It still manifests if I go through and turn off all power-saving options or increase the brightness of the backlight.  If I start with the Max Performance profile and adjust it to my needs, the problem doesn't occur.  Something tells me that the performance profile has something subtly different than all the others and it's not a configurable setting.
    Has anyone else experienced this problem?  Should I upgrade my Nvidia drivers from version 188.25, which came with the machine?  I've read that other people have had issues upgrading their Nvidia driver.  The way the system behaves, this seems like a power management issues more than an Nvidia driver issue.
    Edit: I should also add that I don't have the issue while running on the AC adapter.  Also if I take a screenshot while the pixel shifting occurs, the screenshot is crisp and clear with no signs of the pixel problem.  This seems purely hardware/power management related.
    Edit: see my later post on adjusting the power settings to work around this issue.
    Solved!
    Go to Solution.

    It's reasonably likely that whatever issue you're seeing is linked to a setting in the NVIDIA Control Panel. So the best diagnostic you can do is, in high-performance mode (where the problem DOESN'T occur), write down the value of EVERY single setting that's available in that control panel.
    Then, put the machine in a power mode in which the problem DOES occur. Then again go into the NVIDIA Control Panel and check every single available setting to see if anything has changed. There's a reasonable chance that you'll then find out what setting is causing the problem.
    A picture is worth a thousand words, and a video probably ten times that. Taking a close-up shot of the screen while the problem is occuring, with either a still camera or preferably a video camera (or both), may help siginifcantly in diagnosing the problem. A simulated picture may differ in some subtle way from what's really happening, and those subtleties may be important. For instance, does the effect only break up vertical lines, and not horizontal lines? And does it only happen to content that is moving on the screen? And you're running your display at its native resolution, and not some larger or smaller resolution, right? Is the horizontal offset in the effect always just one pixel-width, or is it more than one pixel-width if you move things fast enough?
    The simulated picture that you provide looks like it suffers from an artifact that appears WITHIN moving items that are displayed on an interlaced-scan display. The artifact goes away when the item ceases to move. But these aren't supposed to be interlaced displays. And I assume that you're talking about the built-in LCD in the W510, and not some external display, right? If somehow your display card is in interlaced display mode, then the problem probably won't appear in any screenshot the W510 takes of its own display. So at least that part of such a problem would agree with what you're describing.
    So maybe the card is in an interlaced display mode when it's not supposed to be. Such a setting would normally be contained under some sort of "Video" menu in the NVIDIA Control Panel.
    And from nVIDIA's website:
    http://nvidia.custhelp.com/cgi-bin/nvidia.cfg/php/​enduser/std_adp.php?p_faqid=2343&p_created=1231528​...!!&p_li=&p_topview=1
    "Graphics card temperatures typically range from 40°C to 90°C."
    The only mention of interlacing that I see on their site for that graphics card is in the "Features" section of:
    http://www.nvidia.com/object/product_quadro_fx_880​_m_us.html
    "PureVideo HD Technology 
    NVIDIA® PureVideo® technology is the combination of high-definition video processors and software that delivers unprecedented picture clarity, smooth video, accurate color, and precise image scaling for SD and HD video content. Features include, high-quality scaling, spatial temporal de-interlacing, inverse telecine, and high quality HD video playback from DVD."
    Plus there are many references to interlace features in the "NVIDIA Accelerated Linux Graphics Driver README and Installation Guide" which covers your video card. And those features are also presumably present in the Windows driver as well:
    http://us.download.nvidia.com/XFree86/Linux-x86_64​/195.36.08/README/README.txt
    One such reference is:
    "While [it] is possible to apply de-interlacing algorithms to progressive streams using the techniques outlined in the VDPAU documentation, NVIDIA does not recommend doing so. One is likely to introduce more artifacts due to the inverse telecine process than are removed by detection of bad edits etc."
    So maybe it's trying to do spatial temporal de-interlacing when it doesn't need to (I once wrote software to do spatial temporal de-interlacing for a thermal camera, and you don't want that to be turned on when it's not supposed to be turned on). It mentions the de-interlacing in connection with a video mixer feature. So that's another possibility.
    Anyway, that should keep you busy, if you want to fix it. ;-)  Good luck!

  • Configuration settings for RFC-FILE interface

    We have a requirement to test the SAP ECC6.0 connectivity with SAP PI7.1 system with a scenario.
    We need to use a RFC in ECC6.0, import the function module in PI and build the scenario.
    For this we have created a
    1. Logical system in ECC6.0
    2. Port in ECC6.0
    3. RFC destination in ECC6.0 with a registered program id, type T, gateway host of ECC
    4. Partner Profile in ECC6.0
    5.Technical System using logical system of ECC6.0(as created in 1) in PI7.1
    6. Associated Business system
    Somehow our scenario is not working, can anyone suggest with the correct settings.
    Rgds
    Kishore

    Whats not working is not clear? Can you do the connection, authorizations test via SM59?

  • Slow and erratic speeds

    I have recently moved to BT Broadband (Option 3) after several years of rock solid 24mbit speeds from another provider.
    I live very close to the exchange and have always synced at maximum or close to maximum speed. ADSL2+ isn't yet available at my exchange for BT Broadband so I'm on the up to 8mbit service.
    I'm only synced at 7616 which is not great, and my IP Profile is set annoyingly low (6500). Firstly is there any way to get this increased?
    The second problem is, as soon as 5pm comes around the fastest speed I can get on the BT Speedtester is around 1.5mbit even though my sync speed is good and IP Profile is much higer than 1.5mbit. Is this normal for BT Broadband. I spoke to support and the advisor said "It is normal for the service to become much slower in the evening" Is it? That wasn't the case with my previous provider.

    7616 is the max speed you will get with interleaved turned on and the corresponding profile is 6500.  If you have stable connection with little noise problems then you could go from interleaved to fast and get max 8128 and profile of 7150.
    sounds like exchange congestion that reduces your speed at peak times - you can check here 
    http://usertools.plus.net/exchanges/mso.php
    http://usertools.plus.net/exchanges/?
    http://btbusiness.custhelp.com/app/service_status
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Calculating Average on a Pivot table- Not calculating correct

    Hello All BI Techie's,
    I have a requirrement, which is calculating the average out of a column , this column is aggreated by sum in the rpd.
    Month Year      Associate Headcount      Involuntary Termination Count (Associates)
    2012 / 07      18878.0      55
    2012 / 08      18817.0      53
    2012 / 09      18770.0      63
    Grand Total      18770.0      17
    Now, I want calculate a column which gives the average of Associate Headcount, ( 18878+18817+18770)/3 , how I can achieve that?
    I tried, using avg(associate headcount), it not returning correct average, any insight?
    Please share your ideas.
    Thanks,
    Bala

    Thanks Srini, The tried your solution but still the problem exists.
    I have created a new column, called Avg Headcount and entered condition in the column, I am using pivot table.
    max(rsum("Workforce Profile Facts"."Associate Headcount"))/max(rsum(1))
    Actual Results
    Month Year      Associate Headcount      Involuntary Termination Count (Associates)      Avg Headcount
    2012 / 07      18878.0      55      18907.8
    2012 / 08      18817.0      53      18878.0
    Grand Total      18817.0      108      18878.0
    Expected results
    Month Year      Associate Headcount      Involuntary Termination Count (Associates)      Avg Headcount
    2012 / 07      18878.0      55      18878
    2012 / 08      18817.0      53      18817
    Grand Total      37695.0      108      37695/2 = 18847.5
    Eeven my Associate Headcount, pivots grand total was wrong, my instanceconfig.xml already setted to aggregate enabled.

  • Qry with non aggregate cols and not in group by clause too.

    Hi all,
    This is the table.
    PROFILE_ID_NO WORK_OK_CD CREATE_DT
    7041086 Y 2003-10-07-10.56.42
    7041086 Y 2003-10-05-10.56.42
    7041086 null 2003-10-06-06.58.08
    7041086 N 2004-09-30-05.08.22
    I want a qry to pick a profile_id_no and work_ok_cd where create_dt is maximum. I tried
    select profile_id_no, work_ok_cd , max(create_dt) from profile group by profile_id_no, work_ok_cd
    It gave 3 rows . I dont want that.
    I want only the last row to be displayed. How to do that?
    Pls help me write this qry .
    Thanks
    Jaya

    user13743192 wrote:
    I want a qry to pick a profile_id_no and work_ok_cd where create_dt is maximum.
    ...Setup:
    create table profile (
      PROFILE_ID_NO number
      , WORK_OK_CD  varchar2(1)
      , CREATE_DT   date
    alter session set nls_date_format = 'YYYY-MM-DD-HH.MI.SS';
    insert into profile values (7041086, 'Y',  '2003-10-07-10.56.42');
    insert into profile values (7041086, 'Y',  '2003-10-05-10.56.42');
    insert into profile values (7041086, null, '2003-10-06-06.58.08');
    insert into profile values (7041086, 'N',  '2004-09-30-05.08.22');
    commit;What if there is another row that ties the maximum CREATE_DT?:
    insert into profile values (9999999, 'Y',  '2004-09-30-05.08.22');Would you want all rows that match the maximum or only one. If you want all rows, maybe use?:
    SQL> select PROFILE_ID_NO, WORK_OK_CD, CREATE_DT
      2  from PROFILE
      3  where CREATE_DT = (select max(CREATE_DT) from PROFILE);
    PROFILE_ID_NO W CREATE_DT
          7041086 N 2004-09-30-05.08.22
          9999999 Y 2004-09-30-05.08.22Otherwise, use one of Frank Kulash's queries above, although the first query (using "DENSE_RANK") gives:
    PROFILE_ID W CREATE_DT
       9999999 Y 2004-09-30 05:08 amand the second gives:
    PROFILE_ID_NO W CREATE_DT
          7041086 N 2004-09-30-05.08.22

  • No Connection to Integration Builder in SPROXY transaction

    Hi everyone!
    I've gone through the blog ; /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    Checked all my configuration and everything seems to be ok!
    But in my business system (ECC6.0/webas 7.0), I'm still getting the "No Connection to Integration Builder" in transaction SPROXY!
    When I run SLDCHECK, everything is OK!  Checked SM59 connections = OK!
    Can you tell me what's missing in this case?  Do I need to activate the XI profile on ECC6?

    Hi again,
    Did the test connection in SM59 and got the following response;
    <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SOAP:Header />
    - <SOAP:Body>
    - <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <faultcode>SOAP:Client</faultcode>
      <faultstring>Empty HTTP request received</faultstring>
      <faultactor>http://sap.com/xi/XI/Message/30</faultactor>
    - <detail>
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIProtocol</SAP:Category>
      <SAP:Code area="MESSAGE">EMPTY_HTTP_REQUEST_RECEIVED</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Empty HTTP query received; message processing not possible</SAP:Stack>
      </SAP:Error>
      </detail>
      </SOAP:Fault>
      </SOAP:Body>
      </SOAP:Envelope>
    Regards,

  • Composition Render Getting Stuck

    I'm having trouble accomplishing a full resolution render in AE.  Originally I tried exporting through AME, and even on low settings it was telling me to expect at least 180 hours to render.  Within AE, whether its H.264 or PNG, if I have the output setting on full resolution I never make it very far past 45-48 seconds in the export before it becomes bogged down and slows almost to a halt.  Several times now I've let it run up to 8 hours long and haven't seen anything beyond 48 seconds rendered of my 4 minute project.  Often it'll cruise through the first 30 seconds at a good speed, but not much beyond that.
    Within AE I'm able to knock it down to 1/4 resolution and get an MPEG2 to finish exporting in under an hour.  But obviously 1/4 resolution isn't going to yield me the professional product I want.  The project is just under 4 minutes long and I'm trying to make a high quality render for youtube.
    My source media is:
    1920x1080 (1.0), 24 fps, Progressive
    48000 Hz, Stereo
    My export settings that I want are pretty much the youtube HD preset:
    NTSC 1280x720, 24 fps, Progressive
    AAC, 128 kbps, 48 kHz, Stereo
    VBR, 2 Pass, Target 8.00, Max 9.00 (profile High, level 4.1)
    (I've also tried CBR @ .6 and that still clunks out past 30 seconds)
    Hardware:
    Intel Core2 6600 @ 2.4GHz
    4GHz RAM
    NVIDIA GeForce GTX 460 @ 2784 MB
    Effects used:
    This is my best guess at the hangup.  I have 155 AE elements.  Those 155 break down into:
    69 motion trackers
    2 solid layers (a slight color burn and slight vignette)
    1 adjustment layer with 3 effects
    2 sequences imported through the Premiere dynamic link including the motion tracking, a mask, 3 effects (including keylight, a simple choker and a simple wire removal), and a single audio track
    77 jpgs (each with 1 camera blur effect)
    4 short mp4 video tracks each between 3-3.2 MB

    I stopped the jpeg sequence rendering.  Turned out like all of the others.  Ran for over 16 hours and only got 53 seconds into the composition.
    Here's some screen shots.  The first is just a basic breakdown - the null objects with the tracking info continue all the way up to 1.  The jpgs/mp4 clips continue all of the way down to the bottom.  The middle is two dynamically linked sequences from premiere pro 5.5.  There's a solid yellow color burn above it at 8% opacity, an adjustment layer with curves, unsharp mask, and noise HLS, and a black solid vignette at 5% opacity.
    This shot highlights the biggest JPG and mp4 transform details.
    This last one highlights how I approached the tracking information.  Each shot had its own tracker.  A jpg is loaded and parented to the null object with the appropriate tracking information.  Highlighted is 75 (IMG_2087.jpg) being parented to 69 (Tracking).
    As for the jpg and mp4 dimensions... looking them up now.
    The mp4's are 320 x 240 and scaled sometimes up to near 1000%
    The smaller pictures (IMG_2087-92) are at 3648 x 2736 and the big one I use for any shot with a big pan (bigcenter) is 7608 x 2736.  My composition settings are 1920 x 1080.  Sounds like a bad match!  And I've got 77 of these!

  • Flickering after export

    Hi, i have some flickering troubles after export in several videos i made.
    These videos are quite easy, short and with a few effects. Generally they are made with ten video tracks and only 1 audio track.
    These flickerings appear randomly in the video output, despite the preview was great. Normally the flickering appears not in the transitions between two video tracks, but inside one.
    Actually i found a "solution": i cancel the video track with the flickering from the timeline and replace it from the video list. After this move, the export often doesn't go wrong, but this seems more a matter of luck than a final solution.
    So, can anyone help me?
    Here i report some data about my work.
    I have a small videocamera that records in fullhd at 25fps and i use premiere cs4.
    Input: avchd 1080p25, progressive
    Output: h.264 - ntsc - 1280x720 - 25fps - progressive - vbr 1 - bitrate 6 mbps - max 9 - high profile - level 4,1
    Unfortunately i haven't a high performance pc: i5-3450, 3.1 ghz; ram 8 gb; nvidia geforce gt 640, 2 gb.
    Thanks, Simon!

    Unfortunately I can't change the video source to 25 fps, the reason for this is unknown, I spoke to a customer support person and he told me that it automatically detects the video signal detection which is 1920x1080 being displayed at 30 fps.
    This is coming from my xbox which is PAL, and I am playing a PAL game, all very confusing.

  • Moving from Corel Ventura into InDesign CS4 - prints dark

    My company has been using Corel Ventura for years, up to version 10.   We are now switching in InDesign CS4, but everything is printing dark.  We use it to publish black & white manuals, including some photos  & vector art.
    Ventura had an essentially unmanaged color workflow -  everything was set to generic - i.e. - "Generic RGB" & "Generic  CMYK"
    In Indesign, currently we are using "North American General  Purpose 2".  The files are printed to a postscript file in InDesign.   Then made into a PDF via Distiller.  The settings for the PS file &  Distiller we are using came from LightingSource.com.
    I  was assuming that the problem came up in the creation of the PS file -  under Color Handling - it is set to "Let InDesign Determine Colors".  So  I took the other option & used "Let PS printer determine colors"   The pages print lighter now, but they are actually too light.  I'm not  sure what to try next, given that any direct alteration of the printer  setup is out of the question.
    Any help would be great!!!
    Lighting Source Settings -  http://lightningsource.com/ops/files/premedia/PSsettingsINDcs4_PC_int.pdf

    Not knowing more, this is a possible solution if you have Photoshop:
    1. In Photoshop with no documents open: Edit Color Settings. By CMYK, Custom CMYK. Black Generation "Maximum"
    2. Hit OK, but NOT to the whole Color Settings dialog, just the Custom CMYK dialog. Again in the CMYK pull down, "Save CMYK" Put the profile in your Color Sync folder where InDesign will recognize it. After you save it CANCEL. You don't really want to alter your Photoshop color settings, you just want to create the Max Black Generation profile
    3. In InDesign. Create a top most layer on master page. Create a white box to fill the whole page. Set Blend Mode to "Color" Lock the layer.
    4. Change the transparency blend space to RGB (Under Edit)
    5. Assign the new Max Black CMYK profile to the ID document (Edit: Assign Profile)
    6. Check with Separations Preview, you should have K channel only
    7. Export PDF/X1a. By Output: Destination: "Document CMYK." You must flatten transparency when you output PDF, and X-1a will do this. The PDF result will be black and white, K channel only. Verify in Acrobat.
    This process converts an all color InDesign document to K only CMYK. Dot Gain will be standard 20% but can be changed in step 1 when you create the custom CMYK.
    Any grayscale images placed should not be affected by this workflow.
    This process is the closest thing I know of to grayscale color management in InDesign.

  • Hello? Anyone out there?

    Hi there.
    I posted my problem on the forum because I was at the end of my tether with BT.
    My original post was here:
    http://community.bt.com/t5/BT-Infinity/Infinity-woes-Speeds-less-than-1Mb-s/m-p/369747/highlight/fal...
    I was advised to contact the forum mods and did so on the 4th January giving full details of my problem. I was led to believe that it could take three days or so for a response. I finally received an email 5 days later (on the 9th) saying:
    Hello,
    Thanks for your email, I am sorry for this delay in replying.
    I can see that my colleague in the technical helpdesk forwarded this case to a specialised technical management team for further assistance. You will be contacted back as soon as possible.
    If however you don’t hear from them within the next couple of days do let me know so I can chase this up with them.
    Best wishes
    Since then... 9 days on from my initial post. Nothing.
    No update. No assurance that ANYONE in BT was looking into this. Nada.
    Are the forum mods superbusy? That I could understand but nobody has contacted me to let me know they'll get to me eventually. Have I been kicked into the long grass in the hope that I'll just shut-up? I had hopes for this forum to help or at least get in touch.
    What a disappointment.
    Mark

    ypt wrote:
    Hi Mark,
    Is your download profile still as good as it was?
    If so have you tried powering down your router and modem, leaving off for about 5 minutes and reconnecting - it may not work but worth a try!
    If no luck try the mods again, they don't normally leave you in mid air, I'm wondering if your email was perhaps after an indian conversation. There have been a couple of posts since Christmas where the mods haven't received a message from the forum - speaks volumes for the quality of BT Mail! (don't getme started on that!)
    ggod luck
    Michael
    Hi Mark I'd definitely have a go at Michael's suggestion of resetting the Modem and Router.
    Looking at your previous thread assuming things haven't changed the exchange equipment (DLM) has set your Download IP on the Max band (IP Profile for your line is -38710 Kbps)..... which is good. 
    In THIS POST dodgerm had the same download IP but was achieving a very slow download.
    Thankfully a reset of his equipment recovered the situation.
    Note turning off the Modem too often isn't recommend as that may cause the DLM to think your line has a problem and reduce the IP in an attempt to provide a slower but more reliable broadband.
    Turning off for a test like this or a say when you go on holiday should be ok though.
    Please let us know how it goes.... and if you need add the "After a Reset" results to this thread and include the URL on the BT Forum Mod contact form. 
    Please Click On any Text in Blue as that automatically links to information.
    PC (NDEGR)

  • Performance issue loading 4000 records from XML

    Hello, Im' trying to upload in a table with the following sqlstatement records from an XML having content of this type
    <?xml version="1.0" encoding="UTF-8"?>
    <custom-objects xmlns="http://www.mysite.com/xml/impex/customobject/2006-10-31">
        <custom-object type-id="NEWSLETTER_SUBSCRIBER" object-id="[email protected]">
      <object-attribute attribute-id="customer-no"><value>BLY00000001</value></object-attribute>
      <object-attribute attribute-id="customer_type"><value>registered</value></object-attribute>
            <object-attribute attribute-id="title"><value>Mr.</value></object-attribute>
            <object-attribute attribute-id="first_name"><value>Jean paul</value></object-attribute>
            <object-attribute attribute-id="is_subscribed"><value>true</value></object-attribute>
            <object-attribute attribute-id="last_name"><value>Pennati Swiss</value></object-attribute>
            <object-attribute attribute-id="address_line_1"><value>newsletter ADDRESS LINE 1 data</value></object-attribute>
            <object-attribute attribute-id="address_line_2"><value>newsletter ADDRESS LINE 2 data</value></object-attribute>
            <object-attribute attribute-id="address_line_3"><value>newsletter ADDRESS LINE 3 data</value></object-attribute>
            <object-attribute attribute-id="housenumber"><value>newsletter HOUSENUMBER data</value></object-attribute>
            <object-attribute attribute-id="city"><value>newsletter DD</value></object-attribute>
            <object-attribute attribute-id="post_code"><value>6987</value></object-attribute>
            <object-attribute attribute-id="state"><value>ASD</value></object-attribute>
            <object-attribute attribute-id="country"><value>ES</value></object-attribute>
            <object-attribute attribute-id="phone_home"><value>0044 1234567 newsletter phone_home</value></object-attribute>
            <object-attribute attribute-id="preferred_locale"><value>fr_CH</value></object-attribute>
            <object-attribute attribute-id="exported"><value>true</value></object-attribute>
            <object-attribute attribute-id="profiling"><value>true</value></object-attribute>
            <object-attribute attribute-id="promotions"><value>true</value></object-attribute>
            <object-attribute attribute-id="source"><value>https://www.mysite.com</value></object-attribute>
            <object-attribute attribute-id="source_ip"><value>10.10.1.1</value></object-attribute>
            <object-attribute attribute-id="pr_product_serial_number"><value>000123345678 product serial no.</value></object-attribute>
            <object-attribute attribute-id="pr_purchased_from"><value>Store where product to be registered was purchased</value></object-attribute>
            <object-attribute attribute-id="pr_date_of_purchase"><value></value></object-attribute>
            <object-attribute attribute-id="locale"><value>fr_CH</value></object-attribute> 
        </custom-object>
        <custom-object type-id="NEWSLETTER_SUBSCRIBER" object-id="[email protected]">
       <object-attribute attribute-id="customer-no"><value></value></object-attribute>
       <object-attribute attribute-id="customer_type"><value>unregistered</value></object-attribute>
            <object-attribute attribute-id="title"><value>Mr.</value></object-attribute>
            <object-attribute attribute-id="first_name"><value>Jean paul</value></object-attribute>
            <object-attribute attribute-id="is_subscribed"><value>true</value></object-attribute>
            <object-attribute attribute-id="last_name"><value>Pennati Swiss</value></object-attribute>
            <object-attribute attribute-id="address_line_1"><value>newsletter ADDRESS LINE 1 data</value></object-attribute>
            <object-attribute attribute-id="address_line_2"><value>newsletter ADDRESS LINE 2 data</value></object-attribute>
            <object-attribute attribute-id="address_line_3"><value>newsletter ADDRESS LINE 3 data</value></object-attribute>
            <object-attribute attribute-id="housenumber"><value>newsletter HOUSENUMBER data</value></object-attribute>
            <object-attribute attribute-id="city"><value>newsletter CASLANO</value></object-attribute>
            <object-attribute attribute-id="post_code"><value>6987</value></object-attribute>
            <object-attribute attribute-id="state"><value>TICINO</value></object-attribute>
            <object-attribute attribute-id="country"><value>CH</value></object-attribute>
            <object-attribute attribute-id="phone_home"><value>0044 1234567 newsletter phone_home</value></object-attribute>
            <object-attribute attribute-id="preferred_locale"><value>fr_CH</value></object-attribute>
            <object-attribute attribute-id="exported"><value>true</value></object-attribute>
            <object-attribute attribute-id="profiling"><value>true</value></object-attribute>
            <object-attribute attribute-id="promotions"><value>true</value></object-attribute>
            <object-attribute attribute-id="source"><value>https://www.mysite.com</value></object-attribute>
            <object-attribute attribute-id="source_ip"><value>85.219.17.170</value></object-attribute>
            <object-attribute attribute-id="pr_product_serial_number"><value>000123345678 product serial no.</value></object-attribute>
            <object-attribute attribute-id="pr_purchased_from"><value>Store where product to be registered was purchased</value></object-attribute>
            <object-attribute attribute-id="pr_date_of_purchase"><value></value></object-attribute>
            <object-attribute attribute-id="locale"><value>fr_CH</value></object-attribute> 
        </custom-object>
    </custom-objects>
    I use the following sequence of queries below to do the insert (XML_FILE is passed to the procedure as XMLType) 
    INSERT INTO DW_CUSTOMER.NEWSLETTERS (
       BRANDID,
       CUSTOMER_EMAIL,
       DW_WEBSITE_TAG
    Select
    p_brandid as BRANDID,
    CUSTOMER_EMAIL,
    p_website
    FROM
    (select XML_FILE from dual) p,
    XMLTable(
    xmlnamespaces(default 'http://www.mysite.com/xml/impex/customobject/2006-10-31'),
    '/custom-objects/custom-object' PASSING p.XML_FILE
    COLUMNS
    customer_email PATH '@object-id'
    ) CUSTOMER_LEVEL1;
    INSERT INTO DW_CUSTOMER.NEWSLETTERS_C_ATT (
       BRANDID, 
       CUSTOMER_EMAIL,
       CUSTOMER_NO, 
       CUSTOMER_TYPE,
       TITLE,
       FIRST_NAME,
       LAST_NAME,
       PHONE_HOME,
       BIRTHDAY,
       ADDRESS1,
       ADDRESS2,
       ADDRESS3,
       HOUSENUMBER,
       CITY,
       POSTAL_CODE,
       STATE,
       COUNTRY,
       IS_SUBSCRIBED,
       PREFERRED_LOCALE,
       PROFILING,
       PROMOTIONS,
       EXPORTED,
       SOURCE,
       SOURCE_IP,
       PR_PRODUCT_SERIAL_NO,
       PR_PURCHASED_FROM,
       PR_PURCHASE_DATE,
       LOCALE,
       DW_WEBSITE_TAG)
        with mainq as
            SELECT
            CUST_LEVEL1.customer_email as CUSTOMER_EMAIL,
            CUST_LEVEL2.*
            FROM
            (select XML_FILE from dual) p,
            XMLTable(
            xmlnamespaces(default 'http://www.mysite.com/xml/impex/customobject/2006-10-31'),
            '/custom-objects/custom-object' PASSING p.XML_FILE
            COLUMNS
            customer_email PATH '@object-id',
            NEWSLETTERS_C_ATT XMLType PATH 'object-attribute'
            ) CUST_LEVEL1,
            XMLTable(
            xmlnamespaces(default 'http://www.mysite.com/xml/impex/customobject/2006-10-31'),
            '/object-attribute' PASSING CUST_LEVEL1.NEWSLETTERS_C_ATT
            COLUMNS
            attribute_id PATH '@attribute-id',
            thevalue PATH 'value'
            ) CUST_LEVEL2
        select
        p_brandid
        ,customer_email
        ,nvl(max(decode(attribute_id,'customer_no',thevalue)),SET_NEWSL_CUST_ID) customer_no   
        ,max(decode(attribute_id,'customer_type',thevalue)) customer_type
        ,max(decode(attribute_id,'title',thevalue)) title
        ,substr(max(decode(attribute_id,'first_name',thevalue)) ,1,64)first_name
        ,substr(max(decode(attribute_id,'last_name',thevalue)) ,1,64) last_name
        ,substr(max(decode(attribute_id,'phone_hone',thevalue)) ,1,64) phone_hone
        ,max(decode(attribute_id,'birthday',thevalue)) birthday
        ,substr(max(decode(attribute_id,'address_line1',thevalue)) ,1,100) address_line1
        ,substr(max(decode(attribute_id,'address_line2',thevalue)) ,1,100) address_line2
        ,substr(max(decode(attribute_id,'address_line3',thevalue)) ,1,100) address_line3   
        ,substr(max(decode(attribute_id,'housenumber',thevalue)) ,1,64) housenumber
        ,substr(max(decode(attribute_id,'city',thevalue)) ,1,128) city
        ,substr(max(decode(attribute_id,'post_code',thevalue)) ,1,64) postal_code
        ,substr(max(decode(attribute_id,'state',thevalue)),1,256) state
        ,substr(max(decode(attribute_id,'country',thevalue)),1,32) country
        ,max(decode(attribute_id,'is_subscribed',thevalue)) is_subscribed
        ,max(decode(attribute_id,'preferred_locale',thevalue)) preferred_locale
        ,max(decode(attribute_id,'profiling',thevalue)) profiling
        ,max(decode(attribute_id,'promotions',thevalue)) promotions
        ,max(decode(attribute_id,'exported',thevalue)) exported   
        ,substr(max(decode(attribute_id,'source',thevalue)),1,256) source   
        ,max(decode(attribute_id,'source_ip',thevalue)) source_ip       
        ,substr(max(decode(attribute_id,'pr_product_serial_number',thevalue)),1,64) pr_product_serial_number
        ,substr(max(decode(attribute_id,'pr_purchased_from',thevalue)),1,64) pr_purchased_from   
        ,substr(max(decode(attribute_id,'pr_date_of_purchase',thevalue)),1,32) pr_date_of_purchase
        ,max(decode(attribute_id,'locale',thevalue)) locale
        ,p_website   
        from
        mainq
        group by customer_email, p_website
    I CANNOT MANAGE TO INSERT 4000 records in less than 30 minutes!
    Can you help or advise how to reduce this to reasonable timings?
    Thanks

    Simplified example on a few attributes :
    -- INSERT INTO tmp_xml VALUES ( xml_file );
    INSERT ALL
      INTO newsletters (brandid, customer_email, dw_website_tag)
      VALUES (p_brandid, customer_email, p_website)
      INTO newsletters_c_att (brandid, customer_email, customer_no, customer_type, title, first_name, last_name)
      VALUES (p_brandid, customer_email, customer_no, customer_type, title, first_name, last_name)
    SELECT o.*
    FROM tmp_xml t
       , XMLTable(
           xmlnamespaces(default 'http://www.mysite.com/xml/impex/customobject/2006-10-31')
         , '/custom-objects/custom-object'
           passing t.object_value
           columns customer_email varchar2(256) path '@object-id'
                 , customer_no    varchar2(256) path 'object-attribute[@attribute-id="customer-no"]/value'
                 , customer_type  varchar2(256) path 'object-attribute[@attribute-id="customer_type"]/value'
                 , title          varchar2(256) path 'object-attribute[@attribute-id="title"]/value'
                 , first_name     varchar2(64)  path 'object-attribute[@attribute-id="first_name"]/value'
                 , last_name      varchar2(64)  path 'object-attribute[@attribute-id="last_name"]/value'
         ) o

  • Capex not calculating out years

    Hi,
    I've got a new client running the CapEx module in a configuration that's close to out of the box.  In the Year dimension, they added years after the "No Year" member when updating the year hierarchy.  The years after "No Year" (FY15 & FY16) wouldn't calc depreciation, but the next year (FY14) would.
    So we changed the order of the years to put "No Year" last.  Now the members we add calculate depreciation with no problem.
    The problem is that the assets that were already in won't recalculate for FY15 & FY16.  We've recalced them, changed the asset status, etc.  Has anyone run into a similar problem?  We can add any new assets correctly, so we know that CalcDepr is working correctly, but can't get it to apply to what's already in there.
    Thanks for the help,
    Larry Manekin

    Thanks Srini, The tried your solution but still the problem exists.
    I have created a new column, called Avg Headcount and entered condition in the column, I am using pivot table.
    max(rsum("Workforce Profile Facts"."Associate Headcount"))/max(rsum(1))
    Actual Results
    Month Year      Associate Headcount      Involuntary Termination Count (Associates)      Avg Headcount
    2012 / 07      18878.0      55      18907.8
    2012 / 08      18817.0      53      18878.0
    Grand Total      18817.0      108      18878.0
    Expected results
    Month Year      Associate Headcount      Involuntary Termination Count (Associates)      Avg Headcount
    2012 / 07      18878.0      55      18878
    2012 / 08      18817.0      53      18817
    Grand Total      37695.0      108      37695/2 = 18847.5
    Eeven my Associate Headcount, pivots grand total was wrong, my instanceconfig.xml already setted to aggregate enabled.

Maybe you are looking for

  • How do I unregister my Iphone i no longer have??

    How do I unregister my Iphone i no longer have?

  • Mail sent through JavaMail gets sent back

    We use JavaMail to send e-mails out with PDF attachments. About 15% of the time, the mail comes back with the message javax.mail.MessagingException. When we send the same e-mail a few minutes later, it goes through without any problem. Any ideas what

  • Bridge CC "operation could not be completed"

    When I attempt to open Adobe Bridge with my Mac OS X Lion format computer, I get "operation could not be completed".  I only have one account on my computer, and have tried the option click, reset preferences.  Any Help?

  • Talking to Parent app is not possable

    All I want to do is communicate by having my child app talk to my parent application. I cannot get this to work, and getting extremely frustrated with this. I cannot find good examples on this scenerio. Documentation does not seem to provide the deta

  • Any way to limit bit rate like the Shuffle G2?

    I didn't find this in searching, so I'm asking if anyone knows of a way to limit the bit-rate of the song, like the iPod Shuffle G2 can (limits songs to 128 bit AAC if that option is checked). That would be greatly appreciated with such limited capac