Max number of queries in webi

Hi all
Someone know what is the maximum number of queries in a Web Intelligence document with Java Panel Reports?
Thanks for your help.

Where did you get your information? I've created reports with far more than 15 data providers. I have reports with 30+ data providers that work fine. And I've certainly see reports that exceed 700MB of data. I'm not saying they're a good idea but I have seen them. In most cases, super large reports (>1GB) are going to place a huge strain on the back end infrastructure and should be avoided, but they're certainly possible.

Similar Messages

  • Max Number of Queries in a Workbook

    What is the Maximum number of queries that can be used in a workbook? I have about 50 in one, but stops executing after 10

    Hi,
    There is limitation in excel, it can dispaly maximum of 65536 Rows and "IV" Coloums.
    It may happen that your workbook result may be utilized by 10 queries output.
    Thats what I think , Just check.
    Thanks
    Mayank

  • Max. number of queries in one workbook

    Hello experts,
    is there a mximum number of queries which can be embedded in one workbook?
    What are the disadvantages of using many queries in one workbook.
    Are there other disadvantages for input ready queries?
    Thank you
    Johannes

    Johannes, to follow up on Rakesh' answer, your performance will depend on the amount of data you are pulling out with the queries.
    as for the additional disadvantages - unless you use the BExGetData formula, formatting will be your primary issue.  Also, when you create buttons for the input ready query, the only time you get to set what Data Provider you are using is when you first code the button.   After that, you would need to recreate the button to ensure that you are pointing to the right query.
    the advantages are that you can model your reporting requirements any way you want (for example we use two multiproviders with different characteristics and use 6 queries to pull the data out)
    Pavel

  • Max number of columns in a Webi report

    In a worst-case scenario test, I requested about 1700 columns in a Webi report, but only a little more than 300 appeared in the SQL; a TOAD request for the same 1700 columns was successful. Is there an upper limit for the number of objects that can appear in a Webi report? Is there a parameter that could increase the limit?

    My eyes read the first half and my brian assumed the second half.
    I dont think there is a limitaion on the number of objects that a WebI report can pull.
    The only limitation I know of is the maximum number of column that you can display in the report panel; the max number is 100,000.
    With the limit on the max number of column diplay in a WebI report can be translated into the max number of columns in the query panel.
    This setting is in CMC> Applications>Web Intelligence-->Quick Display mode

  • "max number of thread"

    We are running a java web app on a Ubuntu Oracle WebLogic server version 10.3.3.
    The java web app performs long polls with open tcp socket to keep the client connection open. The clients are long polling the WebLogic at 30 seconds.
    Currently we are not able to maintain stability for greater than 24 hours with approximately 200 simultaneous sessions on WebLogic server. Session to me is active client/server tcp connection. We have re-written our application to use continuations, but we are seeing ConcurrentModificationException errors in performance testing.
    Is there any setting in WebLogic for “max number of thread” that can handle?
    Edited by: user9316392 on Jul 8, 2010 11:07 AM

    First, WebLogic since 9.0 has a self-tuning thread pool where WLS will automatically grow and shrink the number of threads based on some internal algorithms. I'm not aware of a hard limit so theoretically there is no max thread count as long as the JVM has memory and WLS thinks more threads will help. You can read up on it here:
    http://www.oracle.com/technology/pub/articles/dev2arch/2006/01/workload-management.html
    Practically, I wouldn't expect more than several hundred threads to be helpful.
    As for your situation, how does WLS become unstable? Out of memory, out of file descriptors, errors on new requests, etc. I think you're going to have to use some JVM tools to see what happens to your JVM over time. Is there a memory leak somewhere, is it non-heap memory, etc. JRockit Mission Control is helpful if running on JRockit. If you're on Sun Hotspot, them presumably you can use some of the Hotspot tools. You'll want to compare the state of the JVM towards the beginning of your load test, but after a slight warm-up period with a snapshot after the load test has been running for a long period of time.

  • Max number of dataproviders in the same workbook

    Hi,
    Do you know please what is the max number of dataproviders (recommanded by SAP) we can use in the same workbook / Bex analyzer?
    For information, we are in BI 7 based on excel 2003.
    Thx.
    Radj.
    Edited by: Radjech Radjech on Dec 3, 2010 12:24 PM

    One suggestion is:
    Each tab (copy of the query) would have distinct filter value(s).   In workbook settings,  Uncheck "Allow Refresh of Individual Queries".   Also in WB settings, Do Not Refresh at Opening.    For the entire 50-tab workbook, the filter is limited to a minimum:  company code and the date range because the other filters are hardcoded in each tab.    When you refresh and change variable values at opening the file, all you enter is the company code value and the date
    You might also want to change the Grid Properties:  Uncheck Apply Formatting (for performance); and Uncheck Allow Navigation.  You can add these back later.   Might as well uncheck Sort.
    I have my own question about the DPs.  Can you rename them from the generic Data Provider 1 or copy of Data Provider 1?
    Susan McLeod

  • In Oracle 10g, what is the max number of values we can pass to  'IN' Clause

    Hi,
    In my SQL query i have a scenario like, i have to pass the values to 'IN' Clause dynamically from other application. I want to know what is the the max number of values i can pass to 'IN' Clause.
    i have searched in many pages i seeing answers like 'may be 1000' , 'not sure'....
    Could any one tell me the exact limit of IN Clause in 10g.
    Thanks in Advance.
    Chandran

    Hi, Chandran,
    Chandran M wrote:
    In my SQL query i have a scenario like, i have to pass the values to 'IN' Clause dynamically from other application. I want to know what is the the max number of values i can pass to 'IN' Clause.
    i have searched in many pages i seeing answers like 'may be 1000' , 'not sure'....Don't overlook [Dont want to know|http://forums.oracle.com/forums/thread.jspa?messageID=2683385&#2683385]. This may explain why people are reluctant to give a straight answer.
    Could any one tell me the exact limit of IN Clause in 10g.1000 items such as IN (1, 2, 3, ..., 1000)
    No limit on the number of sets: IN ((1), (2), (3), ...) *<=== NOT QUITE!* See below
    No limit in sub-queries: IN (SELECT ...)
    Edited by: Frank Kulash on Jun 3, 2009 9:43 AM
    The limit of 1000 applies to sets of single items: (x) IN ((1), (2), (3), ...)
    There is no limit if the sets contain two or more items: (x, 0) IN ((1,0), (2,0), (3,0), ...)
    Thanks to Michaels for pointing this out.
    Edited by: Frank Kulash on Jun 3, 2009 10:22 AM
    Fixed link

  • Is a subquery in a BO report limited to a max number of records???

    Here's my problem:
    I recieved an excel sheet with 700 records of customers from a client who wants me to to create a report with specific data for these customers in my Business Objects universe (BO6.5 on SQL Server).
    So I created a dataprovider with query 1, i.e. the requested data of customers. Then I created a second dataprovider, query 2, based on 'personal files', i.e. the excel sheet. In query 1 I added to the conditions that each customer should be in (sub)query 2 (CustomerId In list of the query result ('query2.CustomerId').
    the syntax I have used for this seems OK.
    However, I recieve the following error: "Too many selected values (LOV0001)". I know this error has to do with parameter MAX_INLIST_VALUES, which is limited by default to 99 and can be extended to 256 max. But I thought it refers to the max number of items in lists of values.
    When I limit the number of records in the excel sheet to 99 the result is perfect (proof that I got the syntax right!). I can upgrade the parameter to 256, and can split the excel sheet into three, but that will not be useful when next time my client sends me 10.000 customer records.
    Can I make reports in BO which use subqueries that result in more than 256 records at all? (hardly imaginable).
    What is the best way to do this?
    Thanks in advance!

    Hi Lucas,
    Following is the information regarding the issue you are getting and might help you to resolve the issue.
    ADAPT00519195- Too many selected values (LOV0001) - Select Query Result operand
    For XIR2 Fixed Details-Rejected as this is by design
    I have found that this is a limitation by design and when the values exceed 18000 we get this error in BO.
    There is no fix for this issue, as itu2019s by design. The product always behaved in this manner.
    Also an ER (ADAPT00754295) for this issue has already been raised.
    Unfortunately, we cannot confirm if and when this Enhancement Request will be taken on by the developers.
    A dedicated team reviews all ERs on a regular basis for technical and commercial feasibility and whether or not the functionality is consistent with our product direction. Unfortunately we cannot presently advise on a timeframe for the inclusion of any ER to our product suite.
    The product group will then review the request and determine whether or not the functionality/feature will be included in a future release.
    Currently I can only suggest that you check the release notes in the ReadMe documents of future service packs, as it will be listed there once the ER has been included
    The only workaround which I can suggest for now is:
    Workaround 1:
    Test the issue by keep the value of MAX_Inlist_values parameter to 256 on designer level.
    Workaround 2:
    The best solution is to combine 'n' queries via a UNION. You should first highlight the first 99 or so entries from the LOV list box and then combine this query with a second one that selects the remaining LOV choices.
    Using UNION between queries; which is the only possible workaround
    Please do let me know if you have any queries related to the same.
    Regards,
    Sarbhjeet Kaur

  • Max number of connection for adapters

    Hi PI/XI Experts,
    I have a WS to Proxy Syncronous scenario. I need to know how many client could consume the web service at the same time? Are there any limitation? If so what is the max. number? and where it can be changed?
    There is another question that how many of the WS clients message could be processed via ABAP Proxy? It is important to transport the all the messages to ABAP Proxy at the same time as much as possible.
    Kind regards,
    Altuğ Bayram

    Hi Raj,
    Where you get this knowledge? When i do search before this message i only found about RFC adapter max connection limitations. Every server/adapter should have a maximum capacity. Maybe it is high number for WS and XI adapters but i need to know what it is. If you how can i find it please share the information.
    Kind regards,
    Altuğ Bayram

  • Max number of concurrent users?

    I'm in the process of creating a web site with Cold Fusion and
    Oracle. One concern involves the lack of web hosting services
    that run Oracle on their servers. So, to get around this
    problem, I was considering replicating an Oracle lite database
    and putting it on an ISP's server. My thinking is that there
    would be little need of DBA functions and I can run it on any
    server I choose. But ....
    1. Would Oracle 8i lite support a lot of concurrent users?
    2. What other factors would I have to consider if I set it up
    as a distributed DB ?
    Any help on these thoughts would be greatly appreciated.
    Charles
    null

              Thank you Mark.
              "Mark Griffith" <[email protected]> wrote:
              >Jyothi:
              >
              >Sadly there is not an option to throttle the server in this manner. You
              >will/would have to restrict the QueueLength, which is an excluded property
              >on the ExecuteQueue defintion.
              >
              >http://edocs.bea.com/wls/docs81/javadocs/weblogic/management/configuration/ExecuteQueueMBean.html
              >
              >But this is only a very gross/general level of the server queuing execute
              >requests and isnt fine tuned to just servlets like you want it to be.
              >
              >Cheers
              >mbg
              >
              >"jyothi prabhu" <[email protected]> wrote in message
              >news:3ed04a70$[email protected]..
              >>
              >> Hello everybody,
              >>
              >> is it possible to set max. number of concurrent users accessing
              >weblogic server
              >> through a login servlet? For example, is it possible that at a given
              >point of
              >> time, maximum n users can be logged onto weblogic server while accessing
              >a web
              >> application.
              >>
              >> thanks.
              >
              >
              

  • How to file auto number in save for web ?

    Hi All,
    how to file auto number in save for web ?
    I have make an action script in Photoshop cs5 that
    change the image resolution and SaveForWeb...
    (but at this point user need to supply the file name)
    so, How to write the code/action such that when the
    action button is click the image will save into the file
    file2eMail_001,file2eMail_002,file2eMail_003,file2eMail_004
    or to any unused number ?
    thank for any help!

    You could also ask over in the Photoshop Scripting Forum, I’m pretty certain stuff like progressively numbered copies has been addressed there previously.

  • HT204053 Max number of devices on one iTunes account?

    Max number of Devices on a single iTunes account

    Devices or Computers? The former there is no limit. For the latter there is a limit of 5.

  • How to replace one variable with another in large number of queries

    Hello guys!
    I have this situation: our company needs to use one variable instead of another for certain amount of queries.
    Is there some way to automatically replace one variable with another for a certain characteristic in big number of queries ( like 150 - 200 ) ? Doing this manually would take lots of time)
    Apreciate your help!

    you could try (at your own risk) the following:
    1. search the technical id (ELTUID) of your variable in table RSZELTDIR
    2. see where this variable is used in table RSZELTXREF (by filling RSZELTDIR-ELTUIID in RSZELTXREF-TELTUID)
    3. add similar entries for your new variable
    4. delete the entries for the old variable (they're part of the key, so you can't simply "change" them)

  • Is there a max number of names that can be put into Contacts

    is there a max number of names that can be put into Contacts and still have the app work well?

    Yes, there is. It's how many contacts your hard drive can take. So you can fill up the entire computer with nothing but contacts until your HDD/Flash has no space left. So if you have 250GB, it'd be less than if you had 500GB and you'd have more on 750GB.

  • Max number of chars in process message MSEL?

    Hi, what is the max number of characteristics can be used in process message category's MSEL table? Right now, I am using more than 99 characteristics and I get a short dump DYNPRO_FIELD_CONVERSION. Is it really limited to 99 characteristics and if it is true, is there an OSS note to change it to allow more than 99?
    Thanks and points available

    Please make sure that you build a
    multithreaded program first (check with ldd).
    If anyone can tell me the maximum number of threads per process I would
    really appreicate it.
    Also the maximum number of open files per process. It depends on the architecture (x86/SPARC), OS version,
    64 or 32-bit, /etc/system, shell limitations (/usr/bin/ulimit) ...
    Search for "rlim_fd_max / rlim_fd_cur" on docs.sun.com too.
    HTH,
    -vladimir

Maybe you are looking for