Maximum record length in sender file adapter
Hi,
My requrement is to read a test file which contains the records of fixed length of 4096 charcters. I tried a quick test but sender adapter seems to be terminating the records.
Is there any limitation on the number of characters in records which file adapter can read? Please suggest. I am putting togather a prototype for a potential client and it will have a big impact on decision whether PI can be used in project or not.
Thanks for help!
Never tried this one. How ever, were you trying with content conversion? When you say the records are being truncated, can you tell after how many characters the adapter is truncating the record?
VJ
Similar Messages
-
Sender File Adapter. Fixed Lengths and Field Separator
Hello guys,
I have a doubt in Sender File Adapter with Content Conversion.
I have a text file like:
a,b,c,,e
I have the configuration in the adapter:
Register.fieldNames: a,b,c,d,e
Register.fieldSeparator: ,
The question I have is can I format the length of the text when i create the XML?
I woul like to create the XML like:
<Row>
<Register>
<a>a </a>
<a>b </a>
<a>c </a>
<a> </a>
<a>e </a>
</Register>
</Row>
I would like that when I create the file in Field A I have length = 4, but I have only 1 in the entry, and I want to fill the rest of the length with spaces.
I tried with FieldFixedLengths but when I test it the fields are not being formatted and take the commas as part of the field.
I know that this can be done in Receiver File Adapter, you leave for example one field of 5 length and you format it to 12 length with spaces.
Is this possible for Sender File ADapter?
Many thanks.
Regards,
Xavi.hi,
See the example given in this bog, in this blog the string has been splited into different fields as per the field length, so you may use the same concept to get your output.
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
I hope it helps you.
Regards,
Sarvesh -
Sender file adapter Need to Get Only one record Using FCC
Hi All,
I am using File to ABAP Proxy interface, where i need to Trigger my proxy so in my sender file adapter , i need to configure as such it is should take only one record, from whole file i am using Key field parametrs in FCC but it is taking all the records which is not having the key fields also
please help me
Thanking you
Sridhar2A64310 1 6V83970 03751650016001154000 1 6V9961XT-3 13236157001160
2A64310 1 6V83970 000 1 6V9962XT-3 23236162
2A64730 1 6V83970 03751650016000106000 1 6V9962XT-3 13236162000112
2A64730 1 6V83970 000 1 6V9961XT-3 23236157
2A64741 6V99481 6V83971 4S541403751650016000152360 1 6V9964XT-3 13236168000166
2A64741 6V99471 6V83971 4S5414 000 1 6V9963XT-3 23236167
2A64772 6V99492 6V83982 3S860605001650017000244000 2 6V9965XT-3 13289090000248
2A65690 1 6V97460 07501226872000110000 11242153L&MP 1
2A65690 1 6V97460 000 11242121L&MP 2
EOF
this is sample file , i need to have any one line , cause i need to just trigger a proxy , i am not to going tp take entire file cause in real time i will getting 100 MB file which will be a performance issue -
Sender File Adapter - Fixed Length
We have a Fixed File(Sender). With 3 fields. NO Header. Space is the separator for each fields
VendorNumber 10 bytes
VendorName 10 bytes
City 5 bytes
In the File we can have multiple records.
The Root Node is Vendor.
I am trying to define the SENDER FILE ADAPTER in the following way (I have referred mostly all the blogs) but my file is not picking up for some reason.
File looks like this
V123456789 A123456789 Bosto
V234567890 B123456789 Atlan
V334587900 C123456789 Austi
Note : I have been asked to give the Transport Protocol as "NFS" (Whether this is the problem???) I have summarised the complete details below. Please help me
Adapter Type : File Sender
Transport Protocol : NFS
Message Protocol : File Content Convervsion
Adapter Engine : Integration Server
FILE ACCESS PARAMETERS
Source Directory : /business
file Name : vendor.txt
Content Conversion Parameters
Document Name : Vendor
Document NameSpace: http://sap.com/xi/XI/SplitAndMerge
Recordsetname : Message1
Record Structure : File_MT,*
Recordset Sequence: Ascending
Key Field type : String(Case Sensitive)
Additional Parameters
File_MT.fieldFixedLengths 10,10,5
File_MT.fieldNames VendorNumber,VendorName,City
File_MT.fieldSeparator
File_MT..processFieldNames fromConfiguration.Hi Naveen,
Do check the following things,
>>Note : I have been asked to give the Transport Protocol as "NFS" (Whether this is the problem???) I have summarized the complete details below. Please help me
1.If your file resides on your local network/local computer give NFS(Network file system). if your file resides on a FTP location give FTP and also give the FTP log on parameters.
Additional Parameters
File_MT.fieldFixedLengths 10,10,5
File_MT.fieldNames VendorNumber,VendorName,City
File_MT.fieldSeparator
File_MT..processFieldNames fromConfiguration
2.If this structure does not match with the input file structure the file adapter wont pick up the file. So check for the help document provided by SAP in the following path.
help.sap.com --> Documentation --> SAPNetWeaver --> SAPNetWeaver '04 --> English --> process integration --> SAP Exchange Infrastructure --> connectivity --> Adapters --> File Adapter
Your file contains three records
V123456789 A123456789 Bosto
V234567890 B123456789 Atlan
V334587900 C123456789 Austi
You have mentioned the fieldSeperator as space but there is no File_MT.endSeparator '/n' which differentiates between each and every row (record).
Parameters for Record set Structures mentioned in the sender adapter configuration does not match with the actual file structure .
Try giving exact structures in the configuration of sender file adapter.
regards,
Aravindh. -
File Content Conversion - Sender File Adapter - Record Delimeter ~
The inbound file has file has ~ as record delimeter. I am using the FCC at sender file adapter to covert this file into XML. Somehow, the file adapter is not able to interpret "~" as my record delimeter even thoough I specified "record.endSeparator = ~" in FCC.
Would someone help me with a solution?Raju,
You can also try to use the '0x7E' as endSeperator condition.
I am not sure if the HTML tag will work but this should do the trick. This should be the HEX corresponding entry
char description hex char code html
" ~ " "Tilde" "0x7e" "~" &!tilde; (without !)
greets.
in adition to this see SAP help
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/655453b48a4ddfe10000000a1553f7/frameset.htm
Special Characters in Strings for Separators
In all strings for separators (NameA.fieldSeparator, NameA.beginSeparator, NameA.endSeparator), you can specify non-printable ASCII characters. These characters can each be inserted individually in the strings in the form ´0xHH´ (including the quotation marks), where HH represents the character encoded as a hexadecimal value.
Please also ensure that the "recordSet Structure" also need to be configured Correctly
for example:
Header,1,Detail,*
Header.fieldSeperator --> %parameter%
Detail.fieldSeperator --> %parameter%
Detail.endSeparator --> '0x7e'
Greets -
Sender File Adapter cannot send single record per message ?
Hi,
I have scenario flat file to jdbc. but then why the sender file adapter didn't split the record to become single record per message eventhough i have set it in "Recordsets Per Message" = 1. ?
Document Name MT_APINVOICE
Document Namespace urn:file:jdbc:apivinvoice
Document Offset 8
Recordset Name INPUT
Recordset Namespace
Recordset Structure RECORD,*
Recordset Sequence Ascending
Recordset per Message 1
Key Field Name
Key field Type String
RECORD.fieldFixedLengths 10,5,10,10
RECORD.endSeparator 'nl'
RECORD.fieldNames F1,F2,F3,F4
Please advise
Thank You and Best Regards
Fernand>>but then how to make for example more then 1 records per message.
like 10 records per message. should i set RECORD,10 ?
That is right. Just try it out yourself.
@Shesagiri,
Number of record is decided by the parameter Recordset structure and number of recordset with in a message is decided by Recordset per Message.
Regards
Jaishankar -
Module processing inside Sender File Adapter
Hello,
I am trying to analyze whether I can create a specialized module inside Sender File Adapter. As of right now, the Sender File Adapter and Receiver as well, assume endSeparator character in the end of each record. For files that do not have this field, it is just on continuous string, I assumed I can create an
adapter module
call it BEFORE data in the file is being converted to XML format
Insert 'nl' character (since the record length is fixed)
Call regular adapter processing (converting to/from XML)
However, creating any module inside Sender File Adapter, the payload of the main document is already in XML format. Is there anyway to avoid it?
Thanks for your help,
Dmitriy MindichIt is not possible with the standard functionality.
So maintain the sender file adapter with no conversion, but in the module tab enter following modules:
1. Your module
2. The conversion module (*)
3. The standard module.
(*) for details look here:
Look here:
http://service.sap.com/nw-howtoguides
-> Exchange Infrastructure
-> How To Use the Content Conversion Module in JMS Adapter
Regards
Stefan -
Sender File Adapter is not reading anything
Hi,
I have a really strange problem here. I'm tyring to read a file using file adapter (FTP) and the adapter doesn't read anything and it does not throw any error in the communication channel monitoring.
I'm using a receiver file adapter to write files to the same FTP folder, so it can't be a connectivity problem. And I tried to get the file using Filezilla and it works fine...
In the sender file adapter I tried to simplify the maximum to solve the problem:
- NO File Content Conversion
- NO advanced attributes
- I used the "*" in the file name to read any file
- I've only configured the FTP connection, the folder and the file name. I don't understand why it isn't working...Yes I got this message:
Polling interval started. Length: 5,0 seconds
Now I tried something... In the FTP Connection parameters, I set as the server a random and unexisting name, and I get the same result...
I'm starting to thing that some firewall is blocking the connection, but I have to wait until next monday to know this. But I don't understand why the receiver FTP channel is working...
PD: The cache is correctly refreshed because I changed the polling interval time, and it has been updated on the monitoring -
File content Conversion Issuse for a Sender File Adapter
Hi All ,
I am working for a Migration project , so my File structure will be as follows
<HEADER>
<DATA1>
<DATA2>
<DATA3>
<HEADER>
<ITEM>
<ITEM1>
<ITEM2>
<ITEM3>
<ITEM>
WHERE i do have flat file will be as follows
10001,20081902,US
10,soda,1
30,soda,4
40,soda,5
10002,20081902,US
10,steel,1
30,steel,4
40,steel,5
how to pick this file using FCC from sendere flat file adapter without keyfields , and i can use fixed length alsoSridhar,
You can use a work around like this. Create a generic Data Type something like below.
<Message Type>
<Recordset> - root node
<ROW> - element with occurence 0..unbounded
Now create an outbound MI with the above MT, in FCC in sender file adapter, give Recordset structure as ROW, *
This way , you will read the entire file inside XI as an XML like below
<ROW> header record </ROW>
<ROW> item record 1 </ROW>
<ROW> item record 2 </ROW>
<ROW>....</ROW>
In XI , since your header row & item rows are fixed length, now, you can use that in a UDF in your message mapping , or parse the xml using DOM parser in Java mapping, you should be good. Hope this helps.
~Saravana -
Sender File Adapter - File Content Conversion
Hello,
i do have a problem with the file content conversion at the sender file adapter.
I have configured the file content conversion with key field defined
keyfield: key
recordsetstructure is set as head,1,item,*
head.fieldSeparator |
head.beginSeparator |
head.endSeparator |
head.keyFieldValue H
head.fieldNames key,....
item.fieldSeparator |
item.beginSeparator |
item.endSeparator |
item.keyFieldValue I
item.fieldNames key,....
When i run it like this it will not read since it has a problem to identify the key fields.
When ever i change the whole logic to be not based on fieldseparator but on fixed length, everything is working perfectly fine.
but this unfortuantly doesn't help as i have no fixed structure for the rest of the fields.
also when i change the recordsetstructure to head,1,item,1 my file is also processed correctly, of corse only for the first line, it at least tells me that the file structure is correctly defined.
Can anyone help why the identification for the keyfields doesn't work with field names and separator but in the same set up with fixed lengths ?
thanks a lotHello All,
thanks for the helpful answers.
So i tried Jayan tip and removed the begin Separter.
Unfortuantly my file is really looking like this |H|...|...| for the header record
and for the item record |I|...|...| ( this was an" I" like in Item ...
In my opinion this means i really do have a begin seperator which is the same like the field separator.
When i removed it from both the file and the config it started to work.
So i wrote an java function which will trow away the first digit in this case and integrated it in my szenario.
So that when this file is read there is no | as a begin flag anymore.
And the whole thing starts to work, this sounds more like a bug then a feature but anyway i am happy.
so thanks a lot
Tina -
Mapping problem due to FCC in sender file adapter
Hi All
I am doing File( Flat File ) to RFC Scenario.it is working fine..
the problem comes in mapping with multiple records.
FCC at sender file adapter is used
my Data Type are :
Source DT Target RFC import parameter(table).
E2ED20* ITEM*
KEY VBELN
VBELN POSNR
E2E24* CHARG
KEY
POSNR
CHARG
<b>*->>multiple occurence
E2ED20 and E2E24 are 2 segment ,KEY is used in FCC to identify E2EDL20 & E2EDL24</b>
My source text file is like this :
E2EDL20 0200
E2EDL24 xyz
E2EDL20 0201
E2EDL24 abc
E2EDL24 efg
E2EDL24 mln
E2EDL20 0202
E2EDL24 gty
so the payload should be :
0200 xyz
0201 abc
0201 efg
0201 mln
0202 gty
in <i>FCC ignoer record set= true</i>
otherwise is not called...
i try to use split by value & use oneasmany , not helpfull.
in message mapping when i checked th field VBELN -> display queue
i am getting an array 0200
0201
0202 in white fields
thanks & regards
Ashutosh Rawat<b>Source payload</b>
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_MATNO_FILE xmlns:ns="urn:abc:xxx">
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
<b><VBELN>0083662685</VBELN></b>
</E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900001</POSNR>
<CHARG>1078629</CHARG>
<LFIMG>3200</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900002</POSNR>
<CHARG>1078630</CHARG>
<LFIMG>1895</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900003</POSNR>
<CHARG>1079145</CHARG>
<LFIMG>1883</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900004</POSNR>
<CHARG>1079146</CHARG>
<LFIMG>3195</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
<b> <VBELN>0083662648</VBELN></b>
</E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900011</POSNR>
<CHARG>1001450</CHARG>
<LFIMG>2946</LFIMG>
<MEINS>8PC</MEINS>
</E2E24>
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
<b> <VBELN>0083673936</VBELN></b> </E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900012</POSNR>
<CHARG>1073953</CHARG>
<LFIMG>2458</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
</ns:MT_MATNO_FILE>
<b>at target what required is</b>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900001</POSNR>
</item>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900002</POSNR>
</item>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900003</POSNR>
</item>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900004</POSNR>
</item>
<item>
<b><VBELN>0083662648</VBELN></b>
<POSNR>900011</POSNR>
</item>
<item>
<b><VBELN>0083673936</VBELN></b>
<POSNR>900012</POSNR>
</item>
in Sender FCC
E2ED20.fieldFixedLengths 7,76
E2ED20.fieldNames KZ,VBELN
E2ED20.keyFieldValue E1EDL20
E2ED20.endSeparator 'nl'
E2E24.fieldFixedLengths 7,24,13,7,3
E2E24.keyFieldValue E1EDL24
E2E24.fieldNames KZ,POSNR,CHARG,LFIMG,MEINS
E2E24.endSeparator 'nl'
ignoreRecordsetName true
source file is already there...
Message was edited by:
ashutosh rawat -
Recordset per message in Sender File Adapter
Hi Friends
I have configured a sender file adapter to pick up *.txt files from a specific path, Since the file is having thousands of records it is failing to process the file at PI level . In order to avoid the problem I have kept Recordset Set Per Message as 10 , but still PI is processing all the records into a single message. Please help me in troubleshooting it.
Regards
Suman.Hi Suman,
Go thru these threads for troubleshooting...
Massive file
Processing huge file loads through XI
Processing of huge no of Inbound xml files
Bottleneck in Large file processing
How to process large data files in XI ? 100 MB files ?
Regds,
Pinangshuk. -
Problem facing in sender file adapter
Hi XI gurus,
I am facing a problem in sender file adapter communcation channel
Is there any restriction in XI that XI picks max of 100 at a time .
Actaully probolem here is My XI sender file adapter need to pick 2800 file from ftp.
adapter need to file pick files ranging SAP_OUT_066581_280_INV.xml to SAP_OUT_SZ22TXN066581_2800_INV.xml
to pick these we have given file name as u201CSAP_OUT_*_INV.xmlu201D when ever given this XI is coming with no messges.
when ever file name is given as SAP_OUT_SZ22TXN066581_3*_INV.xml it XI has picked file from 300 to 399
when eve tried with the options to pick all the message
SAP_OUT_SZ22TXN066581_*_INV.xml Failed with no messaege
even atleast tried to pick 1000 mesaanges from 1000 to 1999
i have given like this
SAP_OUT_SZ22TXN066581_1*_INV.xml failed with no messages
while trying with option xi picking file max 100 at a time
SAP_OUT_SZ22TXN066581_1*_INV.xml
SAP_OUT_SZ22TXN066581_11*_INV.xml
SAP_OUT_SZ22TXN066581_12*_INV.xml
like this I am increaing the number and picking maximum of 100 messages only
Is there any way to auto mate this or nny file names need to be required
waiting for your replyCheck SAP Note 821267 - FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter.
I guess point 8 might relate to your problem if the FTP adapter timeout occurs.
check the note 849089 as well.
Also check point 13 and 26.
Gaurav Jain
Points if answer is useful
Edited by: Gaurav Jain on Jun 6, 2008 4:20 PM -
KeyFieldValue in Sender File Adapter Not Working
Hi,
I have a flat file like this...
1Field1Field2Filed3.....
2Field1Field2Field3....
1Field1Field2Filed3.....
2Field1Field2Field3.....
1Field1Field2Filed3.....
2Field1Field2Field3....
My requirement is to pick only lines starting with '1'.
I have configured the Sender File Adapter like this,
Recordset Structure : SOURCE,*
Key Field Name: KF
Key Field Type : String(Case-Sensitive)
File Content Conversion:
SOURCE.fieldFixedLengths 1,5,5,5....
SOURCE.fieldNames KF,FIELD1,FIELD2....
SOURCE.keyFieldValue 1
After all this, still it picks up all the recored instead of records starting with '1'. Can any one solve this?
Regards,
SreedharIf you feel module processor is bit tough you can use XSLT Mapping which is simple in sloving ur problem.
Check this blog to do a sample example using module processor.
/people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter
To implement the above check this link....
https://websmp201.sap-ag.de/~sapdownload/011000358700003237612005E/HowToCreateAdapterModules.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e21106cc-0c01-0010-db95-dbfc0ffd83b3
http://help.sap.com/saphelp_nw04/helpdata/en/8b/895e407aa4c44ce10000000a1550b0/content.htm
/people/gowtham.kuchipudi2/blog/2006/01/13/stop-creation-of-an-empty-file-from-file-adapter-using-module -
Problem in Sender File Adapter using FCC with Variable structure
Hi Experts,
Hi Experts,
I have facing an issues while using FCC in Sender File adapter. Below are the configs for the same:-
Recordset structure required is ==HEADER,1,DATA,*,TRAILER,1
Recordset per message == *
Key Field Name == Key
(Sorry i dont know how to insert screen shot here..pls tell me how can i insert screen shots here on sdn)
HEADER.fieldSeparator ,
HEADER.endSeparator u2018nlu2019
HEADER.fieldNames Key,x,y,zu2026
HEADER.keyFieldValue 1
HEADER.keyFieldInStructure ignore
HEADER.fieldContentFormatting trim
HEADER.additionalLastFields ignore
HEADER.missingLastFields ignore
DATA.fieldSeparator
DATA.endSeparator
DATA.fieldNames
DATA.keyFieldValue
DATA.keyFieldInStructure
DATA.fieldContentFormatting
DATA.additionalLastFields
DATA.missingLastFields
Using same variables for Trailer record as well.
Source CSV file which i am picking:-
ADSE ,RASD,replan Contact ,2 0080509 0 8:43:25 ,
EMPL ,0011111, S Top Up ,20080401 ,20080430 ,sdf , 00000000431250 ,2007 , , , , , ,20080414 18:07:35,
EMPL ,0222222, r Cash Award ,20070701 ,20070703 ,ded , 00000000023509 ,2007 , , , , , ,20080414 18:09:31,
EMPL ,0233333, Cash Award ,20070801 ,20070831 ,df , 00000000044057 ,2007 , , , , , ,20080414 18:10:56,
EMPL ,0244444, Cash Award ,20080101 ,20080111 ,sf , 00000000026717 ,2007 , , , , , ,20080414 18:08:29,
BTRL , 5140,
When i tested the scenario and monitored it using MDT in CC monitoring tool its giving me below mentioned error.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
XML document must have a top level element. Error processing resource 'http://myurlname/mdt/me...
However if i change the occurence of DATA as some specific value for eg 4 instead of * it works fine.
Kindly help me in solving this problem.
Thanks,
Aditya VermaHi Madan,
Thanks a lot for giving me the way to this. But when i tested this with the below file its giving me the same error. Please let me know if i need to do any changes to the parameters mentioned above:-
ADSE ,ASDA,Sha replan Fr ont Feed Contact ,2 0080509 0 8:43:25 ,
EMPL ,0011111, Cash Top Up ,20080401 ,20080430 ,TPV , 00000000431250 ,2007 , , , , , ,20080414 18:07:35,
EMPL ,0222222, r Cash Award ,20070701 ,20070703 ,TPV , 00000000023509 ,2007 , , , , , ,20080414 18:09:31,
EMPL ,0233333, r Cash Award ,20070801 ,20070831 ,TPV , 00000000044057 ,2007 , , , , , ,20080414 18:10:56,
EMPL ,0244444, Cash Award ,20080101 ,20080111 ,TPV , 00000000026717 ,2007 , , , , , ,20080414 18:08:29,
EMPL ,0255555, Cash Award ,20080301 ,20080320 ,TPV , 00000000027870 ,2007 , , , , , ,20080414 18:08:25,
EMPL ,0266666, Cash Award ,20071001 ,20071020 ,TPV , 00000000020681 ,2007 , , , , , ,20080414 18:09:31,
EMPL ,0877777, Cash Top Up ,20080401 ,20080430 ,TPV , 00000000036000 ,2007 , , , , , ,20080414 18:07:05,
EMPL ,0888888, Leaver Cash Award ,20071201 ,20071231 ,TPV , 00000000157200 ,2007 , , , , , ,20080414 18:11:29,
EMPL ,0899999, S Leaver Cash Award ,20080301 ,20080331 ,TPV , 00000000153530 ,2007 , , , , , ,20080414 18:07:42,
EMPL ,0800000, S Leaver Cash Award ,20070701 ,20070731 ,TPV , 00000000012234 ,2007 , , , , , ,20080414 18:08:34,
BTRL , 5140,
This the original csv file which i'll get in live. Kindly suggest as ur solution worked with other file but not working with this scv file.
Thanks a lot,
Aditya.
Maybe you are looking for
-
Analysis of Order Value for Open PO
Dear all, Could someone help to restrict the ME81N to Open PO only. Or alternatevly, could you please indicate a T.code for Open PO Value ($), with un userfriendly outcome (T.Code ME2L, ME2K, ME2N etc refer to Open PO only (WE101) BUT the report is b
-
Year to Date using SAP variables
I've run into a sticking point when trying to create a year to date calculation that works without user entry. The infocube is updated by finance each month (for the previous month) after the final adjustments are made. For this reason, when the quer
-
Enhanced CD features/Macromedia Director Problems...
Ok, so I know this isn't an iDVD question, but it seems that the program is 'sort of' similar (you know, creative, arty, techy, etc). So don't mad because it's a little off topic My band is completing post-production on our EP and we'd like it to be
-
Problem in printing the output !
I have around 45 fields to show in the output ! i have given linesize 1023 because i have to get the output horizontally. but still i am not able to adjust. IS there any other way so that I can customize my print out
-
Hi gurus, I want to know the tax flow BED, CESS, SHces, CST/VAT in third party scenario, can anybody explain the process flow. Thanks in advance. Edited by: Emerson Praveen on Nov 19, 2008 12:37 PM... Edited by: Emerson Praveen on Nov 19, 2008 12: