Maximum work process hold time exeeded
HI ALL,
My user is running one Report painter report. He is getting the values in the report with out any issue. But after trying to filter the data, he is getting the error as "Maximum work process hold time exeeded".
And some times he is getting the same error while exporting the data to the local file from the report.
Is it because of SAP GUI version and patch level?
Kindly let us know.
Thanks & Regards
Shankar
HI Pradeep,
Thanks for your reponse.
Could you please give me some details of that technical step, where i have to set the time , where can i get that parameter ID etc...
Thanks In advance.
shankar
Similar Messages
-
Maximum work process hold time exceed
Dear all,
One of my SAP user got the below error in SAP PROD server , kindly check below logs .
u201CIRP maximum work process hold time exceed. This may be caused by network problems or slow front-end-systems.u201D
Note : SAP Gui also latest installed , still the user got the above error .
Kindly suggestThis error message means that the SAP server (a workprocess) wanted to send data to the frontend (SAPGUI) but the frontend didn't either confirm that the data could be sent or the data didn'T reach the frontend at all.
As already specified in the error message itself this can be caused by a slow (swapping) frontend or by network problems.
Another reason can be local firewalls or firewalls between the server and the frontend.
Markus -
How to monitor SM50 spool work process wait time from RZ20
Hello All,
I want to monitor the SM50 spool work process wait time from RZ20 (like dialog response time from rz20). Please help me to how to do this.
Regards
SubbuHi Subbu,
You may refer SAP help on CCMS to get the list of MTEs to be configured for spool monitoring.
MTE
Description
SpoolNumbers
Spool numbers that every output request is assigned
UsedNumbers
Percentage usage of the spool numbers; you must delete old output requests before this number reaches 100 percent
Status
Is only displayed if the spool service belongs to an SAP application server
WaitTime
Wait time in the spool service in seconds
Monitoring the Spool System (SAP Library - SAP Printing Guide (BC-CCM-PRN))
Hope this helps.
Regards,
Deepak Kori -
PROD server Dailog work process status INHOLD
Dear all,
i have checked sm50 in prod server , most of the work process shows status INHOLD .
Kindly adviseHi nick,
Repeatedly we are facing Work process hold status -
> Reason Private mode .....
No Ty. PID Status Reasn Start Err Sem CPU Time Cl. User
4 DIA 184400 Hold PRIV Yes 37:30 740 320 SA_A048
Report / Spool action
RFITEMGL
Main Program
RFITEMGL
Action Table
Waiting f. since
Server
Database Number Time (usec) Recs.
Direct Read 5.374 39.267 9
Sequential Read 1.799 96030090 917.418
Insert 0 0 0
Update 0 0 0
Direct Read 5.374 39.267 9
Sequential Read 1.799 96030090 917.418
Insert 0 0 0
Update 0 0 0
Delete 1 317 0
Sources 8.726 (Bytes)
RSQL 1048206074 (Bytes)
Commit 0
DB Procedure Calls 0 0
Roles / Memory Number Time (usec)
Roll In 3 323.606
Roll Out 3 3.035
Roll 3.072.000 (Bytes)
Page 1.007.616 (Bytes)
Memory (Total) 1.956.695.364 (Bytes)
Memory(Total Private) 534.922.656 (Bytes)
Memory (used) 1.944.115.424 (Bytes)
Memory (Max. Transaction) 2.002.772.288 (Bytes)
Memory (Max. Dialog Step) 1.956.684.992 (Bytes)
Development Environ. Number Time (usec)
Generate 0
Load Report 3.815
Load Screen 8.726 (Bytes) 34
Load CUA 275
Read Dictionary 0
RFC 0 Calls 0,000000000000000E+00
Queue API 0 (Bytes) 0
Ad Opcodes 0 0
Kindly suggest -
Maximum number of dialog work process
Hello gurus,
Could you please let me know what is the maximum number of dialog work process that you can configure in an Netweaver system with ABAP 7.0 before considering to install a new application server to distribute the load?
Thaks for your help,
Best regards> Just one question, according to the following statement, can I think that I should estimate a usage of 1/4 CPU core by every dialog WP?
No, this was just an example to make clear what I mean.
> Do you know any SAP note that could help me to estimate the number of WP according to the load of the system?
There is no such note and there can't be.
You could have a system with e. g. 100 users where 10 of them do really produce load, the other 90 may just run a few transactions or do just nothing - so 50 WPs is too much. You could also have a system with 20 users where ALL are entering data all data and doing reporting and stuff so 20 WPs is too less. There may also be processes like ATP that use one background worprocess and spawn a number of dialog WPs you configure in the application. If you configure too few of them, the ATP run will run very log, if you configure too much, the system will be overloaded and slowing down. I can imagine dozens of other examples what may cause load or not.
Because of that it's not possible to give a formular how many WPs to be configured for how many users.
This is a tuning thing and needs to be estimated in the first weeks after a GoLive; watch the system, reconfigure, watch. Check ST03N and SM50/SM66 or book an early watch after some time, they have rough estimates and give usually good advises. Out of theory it's almost impossible to predict something.
Markus -
One work process can only process one user request at a time?
Hi,
How to configure the how many work processes for 80 concurrent users login daily.One work process can only process one user request at a time? Does this mean a login user has a dedicated work process servicing him. Or many login users interleave a work process's service? ,clarify the same.
ThankuThere are different types of work processes and the number needed depends on the number of transactions that will take place in the system. We are running 80 concurrent users with 15 dialog work processes. Please see the link below for an explanation:
http://help.sap.com/saphelp_46c/helpdata/en/fc/eb2e8a358411d1829f0000e829fbfe/content.htm -
Background work process On-hold
Hello,
There is a background job running in Production system for more that 10000ms.
Background work processes is on-hold and the resaon is ARFC.
Following is the log file:
X Thu Jun 11 07:31:10 2009
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
Can any one help.
TruptiHi,
In addition to above check below links. it speaks about same error message.
Re: Kernel upgrade to 700.175 UC incresing the dev_w0 log drastically
Re: RFC_VMC_COMMUNICATION_ERROR
Thanks
Sushil -
Work process in running status from Long time
Hi all,
In my production system Workprocess is in runnig staus almost from 44 hours.
i tried to end session of user but it not ending.
i tried to kill work process from sm50 end work process and from os(unix) kill -9 pid every thing i tried but work process is in still running
please give some ideas to clear this
Thanks,
Shashi
Edited by: shashikiran.ss on Oct 11, 2010 1:23 PMHi Juan,
yes from sm50 i have done cancel without core. no jobs are running or sheduled with that user. but work process status is in running with program J_1IREGS no action is taking place.
Restarting box not possible right now.
Regards
Shashi -
Unable to start the SAP instance - work processes are terminated
Hello,
We are implementing SAP ECC 6.0 on iSeries, i5/OS V5R4.
The application server & the database server are implemented on one centralized physical iSeries server.
We recently attempted to copy one SAP system (DEV) from one iSeries server to another, through restoring from an Entire System backup.
After successfully conducting the restore onto the new (destination) iSeries server, and conducting all the necessary host name changes to be the same as the host name of the source system, we encountered a problem when trying to start the SAP : all the jobs under sub-system R3_00 are started, except the jobs constituting the SAP work processes; i.e. WP00, WP01, etc.
The following is the file holding the SAP start log :
/usr/sap/<SID>/DVEBMGS00/work/sapstart.log
SAP-R/3-Startup Program Rel 700 V1.8 (2003/04/24)
Starting at 2008/04/07 13:55:49
Startup Profile: "/usr/sap/PRO/SYS/profile/START_DVEBMGS00_MASAPPRO"
Execute Pre-Startup Commands
(47) Local: /usr/sap/PRO/SYS/exe/run/cleanipc 00 remove
(47) Executing "/usr/sap/PRO/SYS/exe/run/cleanipc 00 remove"...
(47) Okay!
(47) Local: CLRLIB LIB(R3WRK00)
(47) Executing CL command "CLRLIB LIB(R3WRK00)"...
(47) Okay!
(47) Local: /usr/sap/PRO/SYS/exe/run/sapmscsa pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -n
(47) Executing "/usr/sap/PRO/SYS/exe/run/sapmscsa pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -n"...
(47) Okay!
Starting Programs
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/saposcol" asynchronously...
(47) Okay, child's pid=52.
(52) Starting: local /usr/sap/PRO/SYS/exe/run/saposcol
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/msg_server pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO" asynchronously...
(47) Okay, child's pid=53.
(53) Starting: local /usr/sap/PRO/SYS/exe/run/msg_server pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/disp+work pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO" asynchronously...
(47) Okay, child's pid=54.
(54) Starting: local /usr/sap/PRO/SYS/exe/run/disp+work pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/rslgcoll pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F" asynchronously...
(47) Okay, child's pid=55.
(55) Starting: local /usr/sap/PRO/SYS/exe/run/rslgcoll pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/rslgsend pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F" asynchronously...
(47) Okay, child's pid=56.
(56) Starting: local /usr/sap/PRO/SYS/exe/run/rslgsend pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/igswd_mt -mode=profile pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO" asynchronously...
(47) Okay, child's pid=57.
(57) Starting: local /usr/sap/PRO/SYS/exe/run/igswd_mt -mode=profile pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO
(47) Waiting for Child Processes to terminate.
(47) **** 2008/04/07 13:55:56 Child 53 terminated with Status 0 . ****
(47) **** 2008/04/07 13:56:25 Child 54 terminated with Status 0 . ****
Thank you in advance for your cooperation.
Best regards.
Reda KhalifaHello,
I did delete all the SAP-related SQL Packages, using the command : DLTR3PKG, then IPL the server, then try to start the SAP system, but with no success (the same previous status)
As per your request, the following are contents of the four log files :
dev_disp.new, dev_disp, dev_w0, dev_rd :
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 00
sid PRO
systemid 324 (IBM iSeries with OS400)
relno 7000
patchlevel 0
patchno 98
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 52
Tue Apr 8 13:47:32 2008
kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 52) [dpxxdisp.c 1239]
shared lib "dw_xml.so" version 98 successfully loaded
shared lib "dw_xtc.so" version 98 successfully loaded
shared lib "dw_stl.so" version 98 successfully loaded
shared lib "dw_gui.so" version 98 successfully loaded
shared lib "dw_mdm.so" version 98 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
WARNING => DpNetCheck: NiServToNo(sapdp00) failed (rc=-3)
ERROR => DpNetCheck: NiServToNo(sapgw00) failed (rc=-3) [dpxxtool2.c 5217]
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >MASAPPRO_PRO_00 <
DpShMCreate: sizeof(wp_adm) 50960 (1456)
DpShMCreate: sizeof(tm_adm) 27955928 (27928)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1848)
DpShMCreate: sizeof(wall_adm) (200056/174328/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x700000080000000, size: 28969592)
DpShMCreate: allocated sys_adm at 0x700000080000000
DpShMCreate: allocated wp_adm at 0x700000080001ee8
DpShMCreate: allocated tm_adm_list at 0x70000008000e5f8
DpShMCreate: allocated tm_adm at 0x70000008000e658
DpShMCreate: allocated wp_ca_adm at 0x700000081ab7930
DpShMCreate: allocated appc_ca_adm at 0x700000081abd6f0
DpShMCreate: allocated comm_adm at 0x700000081abf630
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x700000081b45310
DpShMCreate: allocated gw_adm at 0x700000081b45390
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x700000081b453c0
DpShMCreate: allocated wall_adm at 0x700000081b453c8
Tue Apr 8 13:47:33 2008
MBUF state OFF
DpCommInitTable: init table for 500 entries
ERROR => DpIPCInit2: NiServToNo failed ((null)--3) [dpxxtool2.c 511]
DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit2
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Apr 8 13:47:43 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Apr 8 11:47:43 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
6 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
7 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
8 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
9 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
10 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
11 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
12 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
13 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
14 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
15 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
16 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
17 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
18 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
19 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
20 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
21 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
22 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
23 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
24 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
25 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
26 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
27 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
28 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
29 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
30 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
31 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
32 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
33 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
34 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Tue Apr 8 11:47:43 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
ERROR => DpMQueueInfo: DpQueueInfo [dpxxtool.c 2032]
Dump of tm_adm structure: Tue Apr 8 11:47:43 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Apr 8 11:47:43 2008
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Apr 8 13:47:48 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >MASAPPRO_PRO_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect: shmat key 57 prot 3/0 done
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect: shmat key 57 prot 1/4096 done
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
ShmCreate( 76, 0, 2, 0x0x1808c5508 )
ShmKeyPermission( 76 ) = 0777 (octal)
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 1, 3 )
ShmProtect: shmat key 1 prot 3/0 done
ShmCreate( 1, 0, 2, -> 0x0x700000070000000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 2, 3 )
ShmProtect: shmat key 2 prot 3/0 done
ShmCreate( 2, 0, 2, -> 0x0x700000080000000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 3, 3 )
ShmProtect: shmat key 3 prot 3/0 done
ShmCreate( 3, 0, 2, -> 0x0x700000090000000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 4 ) = 0777 (octal)
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 14 ) = 0777 (octal)
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 11 ) = 0777 (octal)
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 19 ) = 0777 (octal)
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 33 ) = 0777 (octal)
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 41 ) = 0777 (octal)
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 42 ) = 0777 (octal)
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 43 ) = 0777 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 45 ) = 0777 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 44 ) = 0777 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmCleanup( 54 )
ShmCreate( 54, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 54 ) = 0777 (octal)
ShmCleanup SHM_DB_SYNC
ShmCleanup( 46 )
ShmCreate( 46, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 46 ) = 0777 (octal)
ShmCleanup SHM_DB_CUA_BUFFER
ShmCleanup( 47 )
ShmCreate( 47, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 47 ) = 0777 (octal)
ShmCleanup SHM_DB_OTR_BUFFER
ShmCleanup( 64 )
ShmCreate( 64, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 64 ) = 0777 (octal)
ShmCleanup SHM_DB_ESM_BUFFER
ShmCleanup( 65 )
ShmCreate( 65, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 65 ) = 0777 (octal)
ShmCleanup SHM_ROLL_AREA_KEY
ShmCleanup( 9 )
ShmCreate( 9, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 9 ) = 0777 (octal)
ShmCleanup SHM_PAGING_AREA_KEY
ShmCleanup( 8 )
ShmCreate( 8, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 8 ) = 0777 (octal)
ShmCleanup SHM_ROLL_ADM_KEY
ShmCleanup( 17 )
ShmCreate( 17, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 17 ) = 0777 (octal)
ShmCleanup SHM_PAGING_ADM_KEY
ShmCleanup( 18 )
ShmCreate( 18, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 18 ) = 0777 (octal)
ShmCleanup SHM_PXA_KEY
ShmCleanup( 6 )
ShmCreate( 6, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 6 ) = 0777 (octal)
ShmCleanup SHM_ENQ_TABLE_KEY
ShmCleanup( 34 )
ShmCreate( 34, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 34 ) = 0777 (octal)
ShmCleanup SHM_ENQID_KEY
ShmCleanup( 58 )
ShmCreate( 58, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 58 ) = 0777 (octal)
ShmCleanup SHM_VB_ADM_KEY
ShmCleanup( 7 )
ShmCreate( 7, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 7 ) = 0777 (octal)
ShmCleanup SHM_DB_POOL
ShmCleanup( 40 )
ShmCreate( 40, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 40 ) = 0777 (octal)
ShmCleanup SHM_ES2_ADM
ShmCleanup( 76 )
ShmCreate( 76, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 76 ) = 0777 (octal)
ShmCleanup SHM_EM_ADM
ShmCleanup( 51 )
ShmCreate( 51, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 51 ) = 0777 (octal)
ShmCleanup SHM_EM2_ADM
ShmCleanup( 77 )
ShmCreate( 77, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 77 ) = 0777 (octal)
ShmCleanup SHM_EG2_ADM
ShmCleanup( 78 )
ShmCreate( 78, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 78 ) = 0777 (octal)
ShmCleanup SHM_MSBUF
ShmCleanup( 52 )
ShmCreate( 52, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 52, 3 )
ShmProtect: shmat key 52 prot 3/0 done
ShmCreate( 52, 0, 2, -> 0x0x7000000a0000000 )
ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
ShmCleanup( 30 )
ShmCreate( 30, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 30 ) = 0777 (octal)
ShmCleanup SHM_JAVA
ShmCleanup( 70 )
ShmCreate( 70, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 70 ) = 0777 (octal)
ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
ShmCleanup( 56 )
ShmCreate( 56, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 56 ) = 0777 (octal)
ShmCleanup SHM_POOL_0
ShmCleanup( 10 )
ShmCreate( 10, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 10 ) = 0777 (octal)
ShmCleanup SHM_PROFILE
ShmCleanup( 57 )
ShmCreate( 57, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 57, 3 )
ShmProtect: shmat key 57 prot 3/0 done
ShmCreate( 57, 0, 2, -> 0x0x700000020000000 )
MiCleanup:
ShmCleanup( 62 )
ShmCreate( 62, 0, 2, 0x0xfffffffffffe900 )
ShmKeyPermission( 62 ) = 0777 (octal)
ERROR => ShmCleanup(62) failed 3 [mpixx.c 3239]
MpiCleanup() -> 1
removing Semaphore-Management
Sem2Lock: LockObjPtr = 0x700000030000158, Yield = 1
ERROR => e=2 semctl(4,0,IPC_RMID,..) (2: No such file or directory) [semux.c 2098]
removing request queue
ShmCleanup( 31 )
ShmCreate( 31, 0, 2, 0x0xfffffffffffe910 )
ShmKeyPermission( 31 ) = 0777 (octal)
ERROR => DpRqIQRemove: ShmDelete [dpxxqueu.c 431]
closing connect handles (dgm + tcp)
***LOG Q05=> DpHalt, DPStop ( 52) [dpxxdisp.c 10594]
shutdown completed - server stopped ***
Good Bye .....
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 00
sid PRO
systemid 324 (IBM iSeries with OS400)
relno 7000
patchlevel 0
patchno 98
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 9197
Thu Jan 31 05:54:08 2008
kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 9197) [dpxxdisp.c 1239]
shared lib "dw_xml.so" version 98 successfully loaded
shared lib "dw_xtc.so" version 98 successfully loaded
shared lib "dw_stl.so" version 98 successfully loaded
shared lib "dw_gui.so" version 98 successfully loaded
shared lib "dw_mdm.so" version 98 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >MASAPPRO_PRO_00 <
DpShMCreate: sizeof(wp_adm) 50960 (1456)
DpShMCreate: sizeof(tm_adm) 27955928 (27928)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1848)
DpShMCreate: sizeof(wall_adm) (200056/174328/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x700000080000000, size: 28969592)
DpShMCreate: allocated sys_adm at 0x700000080000000
DpShMCreate: allocated wp_adm at 0x700000080001ee8
DpShMCreate: allocated tm_adm_list at 0x70000008000e5f8
DpShMCreate: allocated tm_adm at 0x70000008000e658
DpShMCreate: allocated wp_ca_adm at 0x700000081ab7930
DpShMCreate: allocated appc_ca_adm at 0x700000081abd6f0
DpShMCreate: allocated comm_adm at 0x700000081abf630
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x700000081b45310
DpShMCreate: allocated gw_adm at 0x700000081b45390
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x700000081b453c0
DpShMCreate: allocated wall_adm at 0x700000081b453c8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Thu Jan 31 05:54:09 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
<ES> Info: use normal pages (no huge table support available)EsStdUnamFileMapInit: ES base = 0x0x7000000d0000000
EsStdInit: Extended Memory 12288 MB allocated
<ES> 3071 blocks reserved for free list.
ES initialized.
Thu Jan 31 05:54:14 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:14 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:14 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:15 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:15 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:15 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:16 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:16 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:17 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:17 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:18 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:18 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:45 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:45 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:47 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:49 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:51 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:53 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:00 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:02 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:03 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:06 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:08 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:13 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:14 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:18 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:21 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:23 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:25 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:27 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:27 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:28 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:29 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:30 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:32 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1626]
***LOG Q0K=> DpMsAttach, mscon ( MASAPPRO) [dpxxdisp.c 11664]
DpStartStopMsg: send start message (myname is >MASAPPRO_PRO_00 <)
DpStartStopMsg: start msg sent
Thu Jan 31 05:55:32 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:34 2008
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 98
Release check o.K.
Thu Jan 31 05:56:06 2008
MBUF state ACTIVE
Thu Jan 31 05:56:07 2008
DpModState: change server state from STARTING to ACTIVE
Thu Jan 31 05:57:28 2008
change reqtype of W0 from 1 to 4
***LOG Q0V=> DpAdXWpConf, mod_req ( 0DIABTC) [dpxxdisp.c 13661]
change reqtype of W1 from 1 to 4
***LOG Q0V=> DpAdXWpConf, mod_req ( 1DIABTC) [dpxxdisp.c 13661]
Thu Jan 31 08:00:55 2008
change reqtype of W0 from 4 to 1
***LOG Q0V=> DpAdXWpConf, mod_req ( 0BTCDIA) [dpxxdisp.c 13661]
change reqtype of W1 from 4 to 1
***LOG Q0V=> DpAdXWpConf, mod_req ( 1BTCDIA) [dpxxdisp.c 13661]
Thu Jan 31 08:44:38 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 12 / sock 19
(SI_ECONN_BROKEN/73; I4; ST; 10.2.4.135:1179) [nixxi.cpp 4248]
Network error of client T42, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T42 is 10.2.4.135(10.2.4.135)
***LOG Q04=> DpRTmPrep, NiBufReceive (347 ALSALI 42 training4 ) [dpxxdisp.c 11375]
RM-T42, U347, 900 ALSALI, training4, 08:44:28, M0, W1, SBWP, 2/1
Thu Jan 31 09:09:27 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 77 / sock 84
(SI_ECONN_BROKEN/73; I4; ST; 10.2.3.76:1233) [nixxi.cpp 4248]
Network error of client T109, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T109 is 10.2.3.76(10.2.3.76)
***LOG Q04=> DpRTmPrep, NiBufReceive (462 ASEDKY 109 amrsedke ) [dpxxdisp.c 11375]
RM-T109, U462, 900 ASEDKY, amrsedke, 08:49:14, M0, W1, VA05, 2/1
Thu Jan 31 09:55:17 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 49 / sock 56
(SI_ECONN_BROKEN/73; I4; ST; 10.2.14.50:1158) [nixxi.cpp 4248]
Network error of client T81, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T81 is 10.2.14.50(10.2.14.50)
***LOG Q04=> DpRTmPrep, NiBufReceive (364 MHASSAN 81 Motazhassan ) [dpxxdisp.c 11375]
RM-T81, U364, 900 MHASSAN, Motazhassan, 09:54:12, M1, W6, , 4/2
Thu Jan 31 09:55:27 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 108 / sock 51
(SI_ECONN_BROKEN/73; I4; ST; 10.2.14.52:1158) [nixxi.cpp 4248]
Network error of client T168, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T168 is 10.2.14.52(10.2.14.52)
***LOG Q04=> DpRTmPrep, NiBufReceive (1380 MKADY 168 AtaFathy ) [dpxxdisp.c 11375]
RM-T168, U1380, 900 MKADY, AtaFathy, 09:54:12, M0, W3, ZSDS, 2/2
Thu Jan 31 10:01:29 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 122 / sock 129
(SI_ECONN_BROKEN/73; I4; ST; 10.2.14.53:1144) [nixxi.cpp 4248]
Network error of client T67, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T67 is 10.2.14.53(10.2.14.53)
***LOG Q04=> DpRTmPrep, NiBufReceive (1230 MALGOHARY 67 Mohamedelgoh) [dpxxdisp.c 11375]
RM-T67, U1230, 900 MALGOHARY, Mohamedelgohary, 09:41:13, M0, W2, FBCJ, 2/1
Thu Jan 31 10:21:30 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 100 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T100, U402, 900 EABDELHAKAM, EmanHakam, 10:00:29, M1, W1, , 3/1
Thu Jan 31 10:25:50 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 65 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T65, U1129, 900 MSAAD, MOHAMMEDSAAD, 10:04:38, M0, W6, , 2/0
Thu Jan 31 10:27:50 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 189 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T189, U1638, 000 , MaryRose2, 10:06:37, M0, W5, SESS, 2/0
Thu Jan 31 11:01:54 2008
SoftCancel request for T107 U2249 M1 received from REMOTE_TERMINAL
Thu Jan 31 11:05:12 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 188 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T188, U2347, 900 MABDELGHANY, ManStore, 10:43:54, M0, W10, , 2/0
Thu Jan 31 11:12:30 2008
Network error of client T190, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T190 is 10.2.6.71(10.2.6.71)
***LOG Q04=> DpRTmPrep, NiBufReceive (2917 HAEZZ 190 hanyezzeldin) [dpxxdisp.c 11375]
RM-T190, U2917, 900 HAEZZ, hanyezzeldin, 11:12:18, M0, W3, VELO, 2/1
Thu Jan 31 11:13:14 2008
ERROR => DpRqCheck: T190 in state TM_SLOT_FREE [dpxxdisp.c 6846]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5196]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c 5198]
-IN-- sender_id DISPATCHER tid 190 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 2917 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 38334
-IN-- req_info LOGOFF CANCELMODE
ERROR => DpRqCheck: T190 in state TM_SLOT_FREE [dpxxdisp.c 6846]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5196]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c 5198]
Thu Jan 31 11:13:15 2008
-IN-- sender_id DISPATCHER tid 190 wp_ca_blk 4 wp_id 0
-IN-- action SEND_TO_WP uid 2917 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len 8 rq_id 40183
-IN-- req_info LOGOFF CANCELMODE
Thu Jan 31 11:16:53 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 57 / sock 64
(SI_ECONN_BROKEN/73; I4; ST; 10.2.7.139:1185) [nixxi.cpp 4248]
Network error of client T86, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T86 is 10.2.7.139(10.2.7.139)
***LOG Q04=> DpRTmPrep, NiBufReceive (834 RMOAWAD 86 roshdimoawad) [dpxxdisp.c 11375]
RM-T86, U834, 900 RMOAWAD, roshdimoawad, 10:56:06, M1, W12, FBL5, 3/2
Thu Jan 31 11:19:13 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 105 / sock 112
(SI_ECONN_BROKEN/73; I4; ST; 10.2.7.120:1207) [nixxi.cpp 4248]
Network error of client T143, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T143 is 10.2.7.120(10.2.7.120)
***LOG Q04=> DpRTmPrep, NiBufReceive (552 IFEKRY 143 ibrahimfekry) [dpxxdisp.c 11375]
RM-T143, U552, 900 IFEKRY, ibrahimfekry, 11:19:06, M0, W1, FB01, 3/1
Thu Jan 31 11:56:01 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:56:43 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:56:46 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:57:50 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:14 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:41 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:47 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:49 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:50 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:53 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:01 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:02 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:03 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:04 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:05 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:07 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:08 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:09 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:12 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:15 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:20 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:19:50 2008
DpHdlDeadWp: restart wp (pid=9213) automatically
Thu Jan 31 12:19:56 2008
Network error of client T180, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Thu Jan 31 12:19:56 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 12:19:57 2008
Client address of T180 is 10.2.6.71(10.2.6.71)
***LOG Q04=> DpRTmPrep, NiBufReceive (2942 HAEZZ 180 hanyezzeldin) [dpxxdisp.c 11375]
RM-T180, U2942, 900 HAEZZ, hanyezzeldin, 11:51:33, M0, W0, VELO, 2/1
Thu Jan 31 12:19:58 2008
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c 6908]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5196]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c 5198]
-IN-- sender_id REMOTE_TERMINAL tid 180 wp_ca_blk 5 wp_id -1
-IN-- action SEND_TO_WP uid 2942 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len 375 rq_id 49950
Thu Jan 31 12:21:27 2008
ERROR => W0 (pid 9340) died [dpxxdisp.c 14319]
Thu Jan 31 12:21:29 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 12:30:53 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 52 / sock 158
(SI_ECONN_BROKEN/73; I4; ST; 10.2.5.110:1255) [nixxi.cpp 4248]
Network error of client T113, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T113 is 10.2.5.110(10.2.5.110)
***LOG Q04=> DpRTmPrep, NiBufReceive (2713 MMAGDY 113 MOHAMEDMAGDI) [dpxxdisp.c 11375]
RM-T113, U2713, 900 MMAGDY, MOHAMEDMAGDI, 12:27:33, M1, W8, FB1D, 4/2
Thu Jan 31 12:39:20 2008
SoftCancel request for T117 U2416 M1 received from REMOTE_TERMINAL
Thu Jan 31 12:54:32 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:56:17 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:59:34 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 108 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T108, U4450, 900 EABDELHAKAM, EmanHakam, 12:38:22, M0, W7, FTR0, 2/2
Thu Jan 31 13:06:12 2008
ERROR => DpRqCheck: T162 in state TM_SLOT_FREE [dpxxdisp.c 6846]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5196]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c 5198] -
Work processes ended by itself
Hi all
Yesterday, in our BI system, all of a sudden in the evening all our work processes went into the end state and the system froze.
We did not issue a endsap or anything like that.
We tried looking into the files but are not sure what exactly happened.
In the DSPLOG QHST,
We see the work proocess WP00 ended abnormally and then everything went down after that.
We saved the files to investigate.
Here is the trace file for WP00 :
C Thu Jul 17 17:32:18 2008
C Secondary DB connect, Service connection
C === Secondary DB connect successfull! ===
C === Connection settings ===
C connected = TRUE
C con_hdl = 1
C db_handle = 3
C dbhost = biprd
C rdbname =
C dblib = R3BIPDATA
C r3sysle_changed = FALSE
C query_compl_reval = O
C dbconnecttype = L
C user = BIP00
C qaqqinilib = Default (QUSRSYS)
C dbjobname = QXDARECVR
C dbjobuser = QUSER
C dbjobno = 083090
C rmtexelib = SAPBIPNUC
C parallel_alter_tables = *OFF
C ===========================
C Query options file QUSRSYS/QAQQINI not found.
B Connection 1 opened (DBSL handle 1)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080715 082859 biprd
B 000 001 R/3*BWMON 000001505 ACTIVE NO NO NO 004 255 255 20080717 173218 biprd
B 000 002 R/3*TIMESTAMP 000001504 DISCONNECTED NO NO NO 004 255 255 20080717 163325 biprd
B 000 003 R/3* 000001500 DISCONNECTED NO NO NO 002 255 255 20080717 163316 biprd
B 000 004 R/3*DTPLOG 000001497 DISCONNECTED NO NO NO 002 255 255 20080717 155733 biprd
B 000 005 R/3*RSAPOADM 000000954 DISCONNECTED NO NO NO 000 255 255 20080716 171044 biprd
B 000 006 R/3*BWDIM 000001422 DISCONNECTED NO NO NO 004 255 255 20080717 070217 biprd
M
M Thu Jul 17 17:46:40 2008
M ThLocalRes: trace flag = 0
M DpSigInt: caught signal 15
M in_ThErrHandle: 1
M ThResetEmMagic: reset em magic for T32/M0/I0
M ThSigHandler: signal (step 4, th_errno 11, action 2)
M
M Info for wp 0
M
M pid = 1070
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = DP_RQ_DIAWP
M rq_info = 0
M tid = 32
M mode = 0
M len = 168
M rq_id = 2155
M rq_source = FROM_WP_CA
M last_tid = 32
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 20000
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 1
M ext_checked_resource(HTTP) = 1
M report = > <
M action = 11
M tab_name = >/BI0/D0SD_C035 <
M attachedVm = no VM
M
M Modeinfo for User T32/M0
M
M tm state = 2
M uid = 10845
M term type = 0xca
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >PMCGARTY <
M terminal = >10.54.6.53 <
M client = >300<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M its_plugin = NO
M allowCreateMode = YES
M blockSoftCanel = NO
M session_id = >487E8451D9FE042EE10080010A36FF71<
M ext_session_id = >487E8451D9FE042EE10080010A36FF71<
M imode = 0
M mode state = 0x42
M mode clean_state = 2
M task_type = 0
M lastThFc = THFCMPIINIT
M lastAction = TH_IACT_NO_ACTION
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 0
M async_receives = 0
M cpic_receive = 0
M em handle = 3
M roll state = 2
M abap state = 2
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M softcancel = 1
M cancelInitiator = IC_MAN
M clean_state = DP_SOFTCANCEL
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M msg_count = 3
M tcode = > <
M last_wp = 0
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 9
M act enq infos = 2
M em_hyper_hdl = 7000000b1965600
M plugin_info = 7000000b193a300
M act_plugin_hdl = 0
M act_plugin_no = 1
M max_plugin_no = 1
M
M Adresse Offset Data from input buffer
M -
M 700000070000000 000000 00000000 6e000000 44000101 00000000 |....n...D.......|
M 700000070000010 000016 00000000 00000000 00000000 00000000 |................|
M 700000070000020 000032 00000000 00000000 00000000 00000000 |................|
M 700000070000030 000048 00000000 00000004 0000000c 6d732f68 |............ms/h|
M 700000070000040 000064 7474705f 706f7274 66666666 66666667 |ttp_portfffffffg|
M 700000070000050 000080 09001000 a005a170 07000003 55196850 |.......p....U.hP|
M 700000070000060 000096 00000000 00000000 00000001 80083218 |..............2.|
M 700000070000070 000112 0fffffff ffffafe8 00000000 00000054 |...............T|
M 700000070000080 000128 00000001 8063f4b8 0fffffff ffffacc0 |.....c..........|
M 700000070000090 000144 00000000 00000080 00000001 004ac160 |.............J.`|
M 7000000700000a0 000160 00000004 38313030 |....8100 |
M -
M
M *****************************************************************************
M *
M * LOCATION SAP-Server biprd_BIP_00 on host biprd (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Thu Jul 17 17:46:45 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 10713
M * COUNTER 6
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M Entering ThSetStatError
M ThIErrHandle: incomplete previous roll out, do a full roll out
M ThRollOut: roll out T32/U10845/M0/I0 (level=7, short_roll_out=0)
M ThRollOut: call rrol_out (1)
M ThRollOut: act roll state = DP_ROLLED_OUT
M ThRollOut: roll level <> 0, don't call ab_rollout
M ThRollOut: full roll out of U10845 M0 I0 (Level 7) ok
M ThIErrHandle: prv_action of W0: 0xa
M ThIErrHandle: don't try rollback again
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=1)
M ThIErrHandle: Entering ThReplyToMsg
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (11)
M ThErrHdlUser: save context
M ThEmContextDetach2: detach T32/M0 from em memory (em_hdl=3, force=0)
M ThEmContextDetach2: reset local em info
M call ThrShutDown ...
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE YES YES NO 000 255 255 20080715 082859 biprd
B 000 001 R/3*BWMON 000001507 DISCONNECTED NO NO NO 001 255 255 20080717 174636 biprd
B 000 002 R/3*TIMESTAMP 000001508 DISCONNECTED NO NO NO 004 255 255 20080717 173227 biprd
B 000 003 R/3* 000001509 INACTIVE NO NO NO 004 255 255 20080717 174636 biprd
B 000 004 R/3*DTPLOG 000001497 DISCONNECTED NO NO NO 002 255 255 20080717 155733 biprd
B 000 005 R/3*RSAPOADM 000000954 DISCONNECTED NO NO NO 000 255 255 20080716 171044 biprd
B 000 006 R/3*BWDIM 000001422 DISCONNECTED NO NO NO 004 255 255 20080717 070217 biprd
B Disconnected from connection 0
B Disconnected from connection 3
B statistics db_con_commit (com_total=125160, com_tx=49059)
B statistics db_con_rollback (roll_total=2545, roll_tx=3)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1070) [dpuxtool.c 269]
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid BIP
M systemid 324 (IBM iSeries with OS400)
M relno 7000
M patchlevel 0
M patchno 154
M intno 20050900
M make: single threaded, ASCII, 64 bit, optimized
M pid 2490
M
M
M Thu Jul 17 17:48:57 2008
M kernel runs with dp version 235(ext=110) (@(#) DPLIB-INT-VERSION-235)
M length of sys_adm_ext is 364 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 4 2490) [thxxhead.c 1281]
M ThInit: running on host biprd
M calling db_connect ...
C DB4 SQL Reparse Activated
C R3INLPGM: RmtExeLib from /usr/sap/BIP/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is SAPBIPNUC
C DBSLENCWT: rc=0, msg=CPF9897 CONCURRENT WRITE IS ENABLED.
C DbSl/DB codepage check: OK - (ASCII).
C === Central DB connect successfull! ===
C === Connection settings ===
C connected = TRUE
C con_hdl = 0
C db_handle = 1
C dbhost = biprd
C rdbname =
C dblib = R3BIPDATA
C r3sysle_changed = TRUE
C query_compl_reval = O
C dbconnecttype = L
C user = BIP00
C qaqqinilib = Default (QUSRSYS)
C dbjobname = WP00
C dbjobuser = BIP00
C dbjobno = 083100
C rmtexelib = SAPBIPNUC
C parallel_alter_tables = *OFF
C ===========================
C Query options file QUSRSYS/QAQQINI not found.
C -
C -
DbSl EGO Structure
C -
C SAPSYSTEMNAME = BIP
C Character encoding = ASCII
C process class = dialog process
C workprocess id = 0
C local host = biprd
C dbhost = biprd
C rdbname =
C dbname = BIPbiprd
C dblib = R3BIPDATA
C application server = DVEBMGS00
C Connect type = LOCAL
C pid = 2490
C wpjobname = WP00
C wpjobuser = BIP00
C wpjobno = 083100
C DB2/400 vers. appl. server = PASE 4
C DB2/400 vers. DB server = V5R4
C da_cache_size = 100
C reopen = ON
C timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
C dbsl_trace = OFF
C allow_cancel = Try (Unspecified)
C nqe_optimize_method = O - All I/O (compatibility mode)
C nte_list_size = 10
C dbsl_alternate_package = OFF
C -
C SQL monitor started for job
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080717 174857 biprd
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 7000001e0000000, size: 4400000)
M SHM_ROLL_AREA (addr: 7000001f0000000, size: 268435456)
M SHM_PAGING_AREA (addr: 700000200000000, size: 268435456)
M SHM_ROLL_ADM (addr: 700000210000000, size: 2672386)
M SHM_PAGING_ADM (addr: 700000220000000, size: 656416)
M
M Thu Jul 17 17:48:58 2008
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 700000230000000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7440 bytes (50 server) at 700000240000000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
B dbntab: NTAB buffers attached
B dbntab: Buffer FTAB(hash header) (addr: 700000260000088, size: 496)
B dbntab: Buffer FTAB(anchor array) (addr: 700000260000278, size: 320072)
B dbntab: Buffer FTAB(item array) (addr: 70000026004e4c0, size: 1280000)
B dbntab: Buffer FTAB(data area) (addr: 700000260186cc0, size: 30720000)
B dbntab: Buffer IREC(hash header) (addr: 700000270000088, size: 496)
B dbntab: Buffer IREC(anchor array) (addr: 700000270000278, size: 320072)
B dbntab: Buffer IREC(item array) (addr: 70000027004e4c0, size: 320000)
B dbntab: Buffer IREC(data area) (addr: 70000027009c6c0, size: 6144000)
B dbntab: Buffer STAB(hash header) (addr: 700000280000088, size: 496)
B dbntab: Buffer STAB(anchor array) (addr: 700000280000278, size: 320072)
B dbntab: Buffer STAB(item array) (addr: 70000028004e4c0, size: 320000)
B dbntab: Buffer STAB(data area) (addr: 70000028009c6c0, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 700000290000088, size: 2160)
B dbntab: Buffer TTAB(anchor array) (addr: 7000002900008f8, size: 320072)
B dbntab: Buffer TTAB(item array) (addr: 70000029004eb40, size: 800000)
B dbntab: Buffer TTAB(data area) (addr: 700000290112040, size: 3760000)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 16, CON_ID = 1510
B dbstat: TABSTAT buffer attached (addr: 7000002a0007808)
B dbtbxbuf: Buffer TABL (addr: 7000002b0000100, size: 64000000, end: 7000002b3d09100)
B dbtbxbuf: Buffer TABLP (addr: 7000002c0000100, size: 16776192, end: 7000002c0fffd00)
B dbexpbuf: Buffer EIBUF (addr: 7000002e0000108, size: 4194304, end: 7000002e0400108)
B dbexpbuf: Buffer ESM (addr: 7000002f0000108, size: 4194304, end: 7000002f0400108)
B dbexpbuf: Buffer CUA (addr: 700000300000108, size: 16776192, end: 700000300fffd08)
B dbexpbuf: Buffer OTR (addr: 700000310000108, size: 4194304, end: 700000310400108)
B dbcalbuf: Buffer CALE (addr: 700000320000000, size: 500000, end: 70000032007a120)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 182d471b0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 700000340000060
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 7000003400004a8
S using messages for server info
S size of spec char cache entry: 165024 bytes (timeout 100 sec)
S size of open spool request entry: 1248 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A Thu Jul 17 17:49:03 2008
A
A -PXA--
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 21192kb, dir_size: 10540kb.
A Attached to PXA (address 700000350000000, size 600000K, 2 fragments of 289404K )
A abap/pxa = shared unprotect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=7000000b053b000 leng=20955136 end=7000000b1937000)
A >> Shm MMADM area (addr=7000000b09071d0 leng=261120 end=7000000b0946dd0)
A >> Shm MMDAT area (addr=7000000b0947000 leng=16711680 end=7000000b1937000)
A RFC Destination> destination biprd_BIP_00 host biprd system BIP systnr 0 (biprd_BIP_00)
A RFC Options> H=biprd,S=00,d=1,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 33072 bytes at 700000380000000
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/BIP/SYS/exe/run/libsapsecu.o .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N
N Thu Jul 17 17:49:04 2008
N ===...completed with return code 5.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [DB400:700.08]):
B max_blocking_factor = 20, max_in_blocking_factor = 40,
B min_blocking_factor = 10, min_in_blocking_factor = 10,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 1, prefer_in_itab_opt = 1,
B convert AVG = 1, alias table FUPD = 1,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding =SBCS / <none>:-,
B use_hints = abap->1, dbif->0x3, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 1
W ITS Plugin: Release: 700, [7000.0.154.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [16]
W ===... Calling itsp_Init in external dll ===>
W PpioRecoverLocks, table: 7000000b05352f8
W PpioRecoverLocks, number of file locks 256
W PpioRecoverLocks: file lock set to: 0
W PpioRecoverLocks: directory lock set to: 0
W PpioRecoverLocks: global lock set to: 0
W PpioRecoverLocks() done
W PprcRecoverLocks, table: 7000000b05357c0
W PprcRecoverLocks: directory lock set to: 0
W PprcRecoverLocks() done
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M ThCheckPrevUser: previous user was T32/M0, clean counter 0
M ThCheckPrevUser: clean previous user T32/U10845/M0/I0/V-1
M
M Modeinfo for User T32/M0
M
M tm state = 2
M uid = 10845
M term type = 0xca
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >PMCGARTY <
M terminal = >10.54.6.53 <
M client = >300<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M its_plugin = NO
M allowCreateMode = YES
M blockSoftCanel = NO
M session_id = >487E8451D9FE042EE10080010A36FF71<
M ext_session_id = >487E8451D9FE042EE10080010A36FF71<
M imode = 0
M mode state = 0x42
M mode clean_state = 2
M task_type = 0
M lastThFc = THFCMPIINIT
M lastAction = TH_IACT_NO_ACTION
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 3
M roll state = 3
M abap state = 3
M em state = 2
M eg state = 1
M spa state = 3
M enq state = 0
M softcancel = 1
M cancelInitiator = IC_MAN
M clean_state = DP_SOFTCANCEL
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M msg_count = 3
M tcode = > <
M last_wp = 0
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 9
M act enq infos = 2
M em_hyper_hdl = 7000000b1965600
M plugin_info = 7000000b193a300
M act_plugin_hdl = 0
M act_plugin_no = 1
M max_plugin_no = 1
M
M ThCheckPrevUser: reset spa state for user T32/U10845/M0
M LOCK WP ca_blk 7
M ThAtWpBlk: set zttatiln to zero
M ThAtWpBlk: set zttatoln to zero
M DpVmcGetVmByTmAdm: no VM found for T32/M0/I0
M LOCK APPC ca_blk 11
M set task type 0
M ThCleanPrevUser: clean U10845 T32 M0 I0 no VM clean state DP_SOFTCANCEL clean counter 1
M ThCleanPrevUser: saved MODE_REC = 40
M PfStatDisconnect: disconnect statistics
M ThCleanPrevUser: found soft cancel flag
M ThSoftCancel: set clean state of T32/M0 to DP_DEFAULT_CLEANING
M ThSoftCancel: soft cancel of T32/M0
M set DbgError 0
M ThSoftCancel: set rq_id_last_softcancel to 2155
M ThCheckMemoryState (0, 0, 0)
M ThRollIn: roll in T32/U10845/M0/I0 (level=7, abap_level=1, attach_em=1)
M ThCheckEmState: check ATTACH for em hdl 3
M ThCheckEmState: call EmContextAttach (em_hdl=3)
M ThRollIn: U10845 M0 I0 (Level 7) ok
M ThRollIn: roll in abap store
M ThIncrSpaVers: spavers of T32/M0 is 2
M ThDequeueCurrentLocks: delete current locks (force=0)
M ThDelEnqInfo: del enq_own >20080717174632922051000000biprd...........................</1
M ThDelEnqInfo: act enq info: 1
M ThDelEnqInfo: del enq_own >20080717174632922065000000biprd...........................</2
M ThDelEnqInfo: act enq info: 0
M ThIAMDel: delete tid/mode 32/0 (th_errno 0, release 1)
M ThTSCancel: set T32/M0 in status MODE_CANCEL
M ThIDeleteMode (32, 0, 3, ><, 0, 255, TRUE)
M ThIDeleteMode: no modes found ..
M no sub modes
M ThCheckMemoryState (0, 0, 1)
M ThIAMDel2: last active mode (0) delete tid (32)
M ThIUsrDel (0, 1)
M ThCheckMemoryState (0, 0, 1)
M ThIUsrDel: set status of T32 to TM_NEND
M ThResFree: free resources of U10845 M0 I0 (normal mode, complete free) at level 3, errno=0, db_action=TH_DB_ROLLBACK, pooling=1
M ThResFree: reset spa state for user T32/U10845/M0
M ThCheckMemoryState (0, 0, 1)
M ThCallHooks: call hook >SAP-Trace RFC save< for event BEFORE_SESSION_END
M TrThHookFunc: called for session end
M ThLocalContextId: create local context id
M NiIMyHostName: hostname = 'biprd.nycus.pharma'
M NiHsLGetNodeAddr: found hostname 'biprd.nycus.pharma' in cache
M NiIGetNodeAddr: hostname 'biprd.nycus.pharma' = addr 10.54.255.113
M ThGetTransId2: got trans id (spa) >487E8456D9FE042EE10080010A36FF71< (32)
M ThCallHooks: call hook >abTpdaThHook_EModeEnded< for event BEFORE_SESSION_END
M ThCallHooks: call hook >ITSP: EndOfSession< for event BEFORE_SESSION_END
M ThCallHooks: call hook >HttpClearSession< for event BEFORE_SESSION_END
M ThCallHooks: call hook >DbgBeforeSessionEnd< for event BEFORE_SESSION_END
M ThCallHooks: call hook >abRtmClearSession< for event BEFORE_SESSION_END
M ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_SESSION_END
M ThIRollBack
M ThIRollBack: call db_rollback
M ThCheckComOrRb (event=0, full_commit=1)
M ThCallHooks: call hook >ab_SosRfcBeforeRollback< for event BEFORE_ROLLBACK
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_ROLLBACK
M PfAStatRevertCollected: nothing to do
M ThCallHooks: call hook >dyKeyTableReset< for event BEFORE_ROLLBACK
M ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_ROLLBACK
M ThCheckComOrRb (event=2, full_commit=1)
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_ROLLBACK
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >ThNoResetMutex< for event AFTER_ROLLBACK
M ThNoCheckMutex: check for remaining locked intervals
M ThCallHooks: call hook >rsts_after_rollback< for event AFTER_ROLLBACK
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_ROLLBACK
M ThVBIRollBack: initialize TH-hooks
M SosRegisterHook: add hook >ThVBICmRbHook(1804e1b10)< for event AFTER_COMMIT
M SosRegisterHook: add hook >ThVBICmRbHook(1804e1b10)< for event AFTER_ROLLBACK
M ThICommit3: full commit, set time, free resources, redispatch
M ThICommit3: commit and free resources
M ThCheckComOrRb (event=1, full_commit=1)
M ThCallHooks: call hook >ab_SosShmBeforeCommit< for event BEFORE_COMMIT
M ThCallHooks: call hook >ab_SosRfcBeforeCommit< for event BEFORE_COMMIT
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCheckComOrRb (event=3, full_commit=1)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >dyKeyTableReset< for event AFTER_COMMIT
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThrClearMemory o.k.
M ThCallHooks: call hook >db_x_short_mem_sync_point< for event AFTER_STORAGE_FREE
M ThCallHooks: call hook >rsts_storage_free< for event AFTER_STORAGE_FREE
M ThAlarm: set alarm to 600 sec
M ThICommit3 o.k.
M PfClearAllRec: clear statistic area
M PfStatDisconnect: disconnect statistics
M rdisp/cpic_snc_delete2: -1 -> 0
M ThDealComm: T32/U10845/M0 has no cpic conns
M clean up all internal modes of T32/U10845/M0
M call ab_endmode (END_MODE_CLEAR_ALL)
M ThVmcCleanMode (deleteOfMainMode=1, AoS=0)
M DpVmcGetVmByTmAdm: no VM found for T32/M0/I0
M ThSesGetSessionType: no associated entry
M ThSesIsJavaSessionId: no associated entry
M ThVmcCleanMode o.k.
M ThGetEnqInfo: no enq info found
M rdisp/cpic_snc_delete: -1 -> 0
M ThRmLocQueue: no async request found
M ThPlgCleanAll: clean all plugins of T32/M0/I0 (th_errno=0, level=3)
M ThPlgClean: clean plugin 0 of T32/M0 (th_errno=0)
M ThPlgClean: call cleanup handler
M ThPlgClean: clean server plugin
M DpSetContextCounter: num_used_contexts[1] = 0
M ThPageFree: free (10845,0,0, mode = 3)
M ThRollFree: free (10845,0,0, mode = 3)
M ThRmFree: cleanup resources for T32 M0
M RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 7000000600c9718/7000000b193bf50/0/1/0
M RmCleanUpResources3: call resource handler 180510808 for key/entry 10/0
M RmInitResourceTblEntry: free resource description at 7000000b1940fc0 (ext_tbl=0)
M RmIFreeTable: free resource table at 7000000b193bf50 (ext_tbl=0)
M ThRmFree: reset eg state of T32 M0
M ThRmFree cleanup resources for T32
M RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 7000000600cf348/0/1/1/0
M RmCleanUpResources3: no resources registered
M ThRmFree: reset eg state of T32
M ThInvalidateEnqMem: reset enq memory 7000000b193ccf0 of T32/M0
M ThIEmFree: delete hyper context (hyperHdl=7000000b1965600)
M ThIEmFree: call EmContextDelete (em_hdl=3)
M ThResFree: save spa pointer 1825d05d0 and install dummy spa
M ThClearMode: clear tid/mode 32/0 (next/prev 0/0)
M ThIUsrDel: set state of term T32 to TM_NEND
M ThISend: (tm/user/type/info = 32/PMCGARTY /0x41/0x0, mode_deleted=1)
M TASK_SWITCH
M DISP
M in_ThErrHandle: 1
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M invalidate act fields from T32/M0
M ThCallDbBreak: use db_sqlbreak
M ThIErrHandle: don't try rollback again
M ThShutDownServer: shutdown server
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M NiIWrite: hdl 5 sent data (wrt=72,pac=1,MESG_IO)
M NiICloseHandle: shutdown and close hdl 5 / sock 9
M call ThrShutDown (1)...
M ThDBDisconnect: disconnect from data base
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 INACTIVE NO YES NO 000 255 255 20080717 174857 biprd
C SQL monitor stopped for job
B Disconnected from connection 0
B statistics db_con_commit (com_total=3, com_tx=0)
B statistics db_con_rollback (roll_total=1, roll_tx=0)
M ThDBDisconnect: disconnect o.k.
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2490) [dpuxtool.c 269]
M Good Bye (-1).....
The DEV_DISP trace fie show the following :
Thu Jul 17 14:12:25 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 27 (60secs)-> disconnecting [dpxxdisp.c 12401]
RM-T27, U10596, 300 KPATIL, IBM-0C94DFEA52A, 13:10:38, M0, W0, RSA1, 2/2
Thu Jul 17 14:37:27 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 38 (60secs)-> disconnecting [dpxxdisp.c 12401]
RM-T38, U10342, 300 RPYNDUPAL, IBM-4C1A50FA72C, 13:35:25, M1, W0, LIST, 3/2
Thu Jul 17 17:46:41 2008
SoftCancel request for T32 U10845 M0 received from IC_MAN
Thu Jul 17 17:46:47 2008
DpSigInt: caught signal 2
DpHalt: shutdown server >biprd_BIP_00 < (normal)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=91)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Stop work processes
Thu Jul 17 17:46:54 2008
ERROR => DpWPCheck: W7 (pid 101) died (severity=0, status=65280) [dpxxdisp.c 14923]
child (pid=101) exited with exit code 255
my types changed after wp death/restart 0xbf --> 0xb9
ERROR => DpWPCheck: W8 (pid 104) died (severity=0, status=65280) [dpxxdisp.c 14923]
child (pid=104) exited with exit code 255
ERROR => DpWPCheck: W10 (pid 106) died (severity=0, status=65280) [dpxxdisp.c 14923]
child (pid=106) exited with exit code 255
my types changed after wp death/restart 0xb9 --> 0xa9
my types changed after wp death/restart 0xa9 --> 0x89
Thu Jul 17 17:46:59 2008
ERROR => DpWPCheck: W9 (pid 105) died (severity=0, status=65280) [dpxxdisp.c 14923]
child (pid=105) exited with exit code 255
Thu Jul 17 17:47:02 2008
J2EE server info
start = TRUE
state = INACTIVE
pid = 91
start_lazy = 0
start_control = SAP J2EE startup framework
ERROR => DpWPCheck: W6 (pid 100) died (severity=0, status=65280) [dpxxdisp.c 14923]
child (pid=100) exited with exit code 255
Thu Jul 17 17:47:08 2008
ERROR => DpWPCheck: W1 (pid 95) died (severity=0, status=65280) [dpxxdisp.c 14923]
child (pid=95) exited with exit code 255
ERROR => DpWPCheck: W2 (pid 96) died (severity=0, status=65280) [dpxxdisp.c 14923]
child (pid=96) exited with exit code 255
ERROR => DpWPCheck: W11 (pid 107) died (severity=0, status=65280) [dpxxdisp.c 14923]
child (pid=107) exited with exit code 255
Thu Jul 17 17:47:24 2008
my types changed after wp death/restart 0x89 --> 0x81
ERROR => DpWPCheck: W3 (pid 97) died (severity=0, status=65280) [dpxxdisp.c 14923]
child (pid=97) exited with exit code 255
ERROR => DpWPCheck: W4 (pid 98) died (severity=0, status=65280) [dpxxdisp.c 14923]
child (pid=98) exited with exit code 255
ERROR => DpWPCheck: W12 (pid 108) died (severity=0, status=65280) [dpxxdisp.c 14923]
child (pid=108) exited with exit code 255
ERROR => DpWPCheck: W13 (pid 109) died (severity=0, status=65280) [dpxxdisp.c 14923]
child (pid=109) exited with exit code 255
Thu Jul 17 17:47:50 2008
Stop gateway
Stop icman
Terminate gui connections
wait for end of work processes
waiting for termination of work processes ...
Thu Jul 17 17:47:51 2008
waiting for termination of work processes ...
Thu Jul 17 17:47:51 2008
ERROR => DpIcmMsgProcess: IcmRecMsg (rc=-8,-6) [dpxxdisp.c 18205]
Thu Jul 17 17:47:52 2008
waiting for termination of work processes ...
Thu Jul 17 17:47:52 2008
ERROR => gateway (pid 89) died [dpxxdisp.c 15725]
ERROR => Internet Communication Manager (pid 90) died [dpxxdisp.c 15811]
MPI: emergency cleanup
Thu Jul 17 17:47:53 2008
DpSetProcessPriority: Run priority for icman adjusted to 12
Thu Jul 17 17:47:53 2008
waiting for termination of work processes ...
Thu Jul 17 17:47:54 2008
waiting for termination of work processes ...
Thu Jul 17 17:47:55 2008
waiting for termination of work processes ...
Thu Jul 17 17:47:56 2008
waiting for termination of work processes ...
Thu Jul 17 17:47:57 2008
waiting for termination of work processes ...
Thu Jul 17 17:47:58 2008
waiting for termination of work processes ...
Thu Jul 17 17:47:59 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:00 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:01 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:02 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:03 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:04 2008
ERROR => Got data for TM 38 in state != TM_CONNECTED/TM_NEND(stat=4) [dpxxdisp.c 2112]
Thu Jul 17 17:48:04 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:05 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:06 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:07 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:08 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:09 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:10 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:11 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:12 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:13 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:15 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:16 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:17 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:18 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:19 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:20 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:21 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:22 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:23 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:24 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:25 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:26 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:27 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:28 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:29 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:30 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:31 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:32 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:33 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:34 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:35 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:36 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:37 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:38 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:39 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:40 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:41 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:42 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:43 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:44 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:45 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:46 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:47 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:48 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:49 2008
waiting for termination of work processes ...
Thu Jul 17 17:48:51 2008
ERROR => DpHalt: W0 (pid 2483) still alive ... [dpxxdisp.c 10124]
Thu Jul 17 17:48:56 2008
DpJ2eeMsgProcess: j2ee state = INACTIVE (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=91)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
ERROR => DpWPCheck: W0 (pid 2483) died (severity=0, status=589833) [dpxxdisp.c 14923]
child (pid=2483) killed with signal 9
Thu Jul 17 17:48:57 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jul 17 17:49:13 2008
ERROR => DpWPCheck: W0 (pid 2490) died (severity=0, status=65280) [dpxxdisp.c 14923]
child (pid=2490) exited with exit code 255
my types changed after wp death/restart 0x81 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=21
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jul 17 17:49:23 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Jul 17 21:49:23 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2490 Ended no 4 0 0 Sequential Read /BI0/D0SD_
1 DIA 95 Ended no 9 0 0
2 DIA 96 Ended no 9 0 0
3 DIA 97 Ended no 8 0 0
4 DIA 98 Ended no 8 0 0
5 DIA 99 Ended no 9 0 0
6 DIA 100 Ended no 11 0 0
7 UPD 101 Ended no 13 0 0
8 ENQ 104 Ended no 13 0 0
9 BTC 105 Ended no 12 0 0
10 BTC 106 Ended no 13 0 0
11 BTC 107 Ended no 9 0 0
12 BTC 108 Ended no 8 0 0
13 BTC 109 Ended no 8 0 0
14 SPO 110 Ended no 13 0 0
15 UP2 111 Ended no 13 0 0
Dispatcher Queue Statistics Thu Jul 17 21:49:23 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
5
2000
336608
336608
--------++++--
+
DIA
20
22
2000
94495
94475
--------++++--
+
UPD
0
1
2000
4
4
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
2
2000
9554
9554
--------++++--
+
SPO
0
2
2000
6561
6561
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 2200
wake_evt_udp_now 0
wake events total387923, udp369152 ( 95%), shm 18771 ( 4%)
since last update total387923, udp369152 ( 95%), shm 18771 ( 4%)
Dump of tm_adm structure: Thu Jul 17 21:49:23 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
AP-T23, U10717, 300 WKACZMAREK, 127.0.1.15, 15:28:40, M0, W1, , 1/0
AP-T31, U10833, 000 TMSADM, DmcmorrisLT1, 17:41:18, M0, W0, , 1/0
AP-T33, U10843, 300 SAPJSF, biprd.nycus.pharma, 17:42:01, M0, W0, , 1/0
RM-T39, U10847, , MNYLT0004, 17:48:19, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Thu Jul 17 21:49:23 2008
=============================
Slots: 300, Used: 5, Max: 21
--------++--
+
id
owner
pid
eyecatcher
---Hi Ingrid
Thanks a lot for the response.
That parameter is right now set to "0".
But on reading the documentation for that parameter, it says you should change it only if SAP recommends you to do so.
We checked in our other systems as well and all that is set to "0" as well.
Will that be Ok to change the parameter to a different value?
If yes, what is the value to be used?
Thanks a lot -
Increase work process to specific Reports..
HI
is it possible to increase work process time to specifi report, becasue i am getting below error while running the report
The program "SAPLKARS" has exceeded the maximum permitted runtime without
interruption and has therefore been terminated.
After a specific time, the program is terminated to make the work area
available to other users who may be waiting.
This is to prevent a work area being blocked unnecessarily long by, for
example:
- Endless loops (DO, WHILE, ...),
- Database accesses with a large result set
- Database accesses without a suitable index (full table scan)
The maximum runtime of a program is limited by the system profile
parameter "rdisp/max_wprun_time". The current setting is 600 seconds. If this
time limit is
exceeded, the system attempts to cancel any running SQL statement or
signals the ABAP processor to stop the running program. Then the system
waits another 60 seconds maximum. If the program is then still active,
the work process is restarted.
please get me the solution asap
thanks By engliYou can set rdisp/max_wprun_time this value dynamically and chage it back to original value after your report is finished.
before you start your reoprt or program do this,
T-CODE --> RZ11 --> rdisp/max_wprun_time --> change value --> new value --> hit OK.
After your report is finished you can switch back to old value.
Regards
SM. -
Dispatcher Not Running work process stop.
HI,
I am facing this problem while installing SAP PI 7.3 on RHEL6 with Oracle. During installation it stops at when it will start instance and when I check found having some issue with dispatcher. Below are the few logs which I found during installation no issue with oracle starting properly and not having any issue with R3trans -d.
Dev_dpmon
trc file: "dev_dpmon", trc level: 1, release: "720"
sysno 00
sid
systemid 390 (AMD/Intel x86_64 with Linux)
relno 7200
patchlevel 0
patchno 90
intno 20020600
make single threaded, Unicode, 64 bit, optimized
profile
pid 14944
Sun May 29 20:46:43 2011
kernel runs with dp version 130000(ext=118000) (@(#) DPLIB-INT-VERSION-129000-UC)
length of sys_adm_ext is 588 bytes
ERROR => DpSysAdmExtCreate: ShmCreate (ATTACH) failed (3) [dpxxtool2.c 691]
ERROR => DpIPCInit2: DpSysAdmExtCreate [dpxxtool2.c 408]
ERROR => DpMonInit: DpExtProcAttach [dpxxmon.c 1081]
ERROR => main: DpMonInit [dpxxmon.c 579]
And Dev_w0
trc file: "dev_w0", trc level: 2, release: "720"
ACTIVE TRACE LEVEL 2
ACTIVE TRACE COMPONENTS all, MJ
M Sun May 29 22:43:59 2011
M
M command line arg 0: dw.sapAX2_DVEBMGS50
M command line arg 1: pf=/usr/sap/AX2/SYS/profile/AX2_DVEBMGS50_sachin
M
M sysno 50
M sid AX2
M systemid 390 (AMD/Intel x86_64 with Linux)
M relno 7200
M patchlevel 0
M patchno 90
M intno 20020600
M make single threaded, Unicode, 64 bit, optimized
M profile /usr/sap/AX2/SYS/profile/AX2_DVEBMGS50_sachin
M pid 2661
M
M kernel runs with dp version 130000(ext=118000) (@(#) DPLIB-INT-VERSION-129000-UC)
M length of sys_adm_ext is 588 bytes
M DpWpCreate: W0 started
M DpFreeResources(pid=2661)
M NiICloseHandle: shutdown and close hdl 1/sock 8
M DpDelSocketInfo: del info for nihdl 9 (pos/type=1/1)
M NiICloseHandle: shutdown and close hdl 9/sock 9 - sock 10
M clear adfunctable
M DpSlicFreeResources: free license server resources
M prctl(PR_SET_UNALIGN): generate SIGBUS on unaligned user access disabled.
M ThStart: th_step = TH_INIT
M ThStart: taskhandler started
M SemSetCb: set callbacks (tryLockCb/lockedCb/releasedCb/tryErrorCb=5b3773/5b37c9/5b37fd/5b3856)
M SigIRegisterExitRoutine: exithandler installed (ThSigHandler)
M SigIRegisterRoutine: handler for signal SIGQUIT installed (ThSigIgnoreHandler)
M SigIRegisterRoutine: handler for signal SIGCHLD installed (SIG_DFL)
M ThrRegisterHooks: register basic hooks
M SosRegisterHook: add hook >ThrBtcStartUp(6bb2c2)< (condition/order=0xf/1) for event AFTER_MSG_UP
M SosRegisterHook: add hook >ThrBtcStartUp(6bb2c2)< (condition/order=0xf/1) for event AFTER_OPMODE_SWITCH
M SosRegisterHook: add hook >ThrtRaiseStopEvent(6b8efa)< (condition/order=0xf/1) for event SOFT_SHUTDOWN
M SosRegisterHook: add hook >ThrtFinishSoftShutdownTest(6b8ea4)< (condition/order=0xf/1) for event FINISH_SOFT_SHUTDOWN_TEST
M SosRegisterHook: add hook >ThrSaveSPAFields(6bad2c)< (condition/order=0xf/1) for event BEFORE_DUMP
M SosRegisterHook: add hook >db_init(16d17f0)< (condition/order=0xf/1) for event CREATE_SHM
M SosRegisterHook: add hook >ThVBDbaRequired(62d600)< (condition/order=IF_ROLLED_IN/1) for event DB_ADMIN_REQUIRED
M SosRegisterHook: add hook >ThrRegisterSem(64b3e0)< (condition/order=0xf/1) for event BEFORE_DB_CONNECT
M SosRegisterHook: add hook >ThrBtcCallLgCl(6bb258)< (condition/order=0xf/1) for event BEFORE_DUMP
M ThrRegisterHooks o.k.
M ThInit: initializing DIA work process W0
M eppSetEnvironment: set component = 1, version = 3, allocFunc = 54de70, freeFunc = 6077d7, traceFunc = 6077f9, traceLevel = 2
M ThInit: ThEppInit o.k.
M
M ***LOG Q01=> ThInit, WPStart (Workp. 0 1 2661) [thxxhead.c 1318]
M
M ThSetTraceLevel: save trace level
M iRng_InitHighResTimer() : Use default timer = 0; Resolution of timer: 1000000000
M -
M Sun May 29 22:44:05 2011
M -
M Rng_PseudoRandomInit() : Initialization of the Pseudo-RNG (128/128/256)
M -
M NiHLFlush: cache flushed
M NiSrvLFlush: service cache flushed
M ThInit: dummy spa pointer = 631dca0
M ThInit: save spa pointer 7f9c7b18e1a0
M ThInitCpicStack: init cpic stack
M ThInit: running on host sachin
M ThPrivInit o.k.
M ThSysUsrCheck (1,1): check system user T0/U1/M0
M ThIEmFree: em state of T0/M0 (em_hdl=-1) is DP_EM_NO_CONTEXT
M ThSysUsrCheck: clear T0
M DpITmSlotClear: clear slot T0
M ThCallHooks: call hook >ThrRegisterSem< for event BEFORE_DB_CONNECT
M SosRegisterSem: malloc/realloc table
M SosRegisterSem: add sem >SEM_TM_ADM_KEY< for wptype 0x77
M SosRegisterSem: add sem >SEM_COMM_ADM_KEY< for wptype 0x77
M SosRegisterSem: add sem >SEM_STAT_KEY< for wptype 0x73
M SosRegisterSem: add sem >SEM_SHM_ADM_AREA_KEY< for wptype 0x73
M SosRegisterSem: add sem >SEM_REQ_QUEUE_KEY< for wptype 0x77
M SosRegisterSem: add sem >SEM_REQ_QUEUE_DIA_KEY< for wptype 0x77
M SosRegisterSem: add sem >SEM_REQ_QUEUE_NOWP_KEY< for wptype 0x77
M SosRegisterSem: add sem >SEM_MSBUF< for wptype 0x73
M SosRegisterSem: add sem >SEM_ASTAT_KEY< for wptype 0x73
M SosRegisterSem: add sem >SEM_PROFILE< for wptype 0x73
M SosRegisterSem: malloc/realloc table
M SosRegisterSem: add sem >SEM_THRUN_ADM< for wptype 0x73
M SosRegisterSem: add sem >SEM_VMC_ADM< for wptype 0x73
M SosRegisterSem: add sem >SEM_PXA_KEY< for wptype 0x73
M ThrRegisterSem: init SEM_PXA_KEY o.k.
M SosRegisterSem: add sem >SEM_ROLL_ADM_KEY< for wptype 0x73
M ThrRegisterSem: init SEM_ROLL_ADM_KEY o.k.
M SosRegisterSem: add sem >SEM_PAGING_KEY< for wptype 0x73
M ThrRegisterSem: init SEM_PAGING_KEY o.k.
M SosRegisterSem: add sem >SEM_CALI_BUFFER< for wptype 0x73
M ThrRegisterSem: init SEM_CALI_BUFFER o.k.
M SosRegisterSem: add sem >SEM_CCC_KEY< for wptype 0x73
M ThrRegisterSem: init SEM_CCC_KEY o.k.
M SosRegisterSem: add sem >SEM_VB_KEY< for wptype 0x73
M ThrRegisterSem: init SEM_VB_KEY o.k.
M SosRegisterSem: add sem >SEM_PRES_BUF< for wptype 0x73
M ThrRegisterSem: init SEM_PRES_BUF o.k.
M SosRegisterSem: add sem >SEM_DB_TBUFF< for wptype 0x73
M ThrRegisterSem: init SEM_DB_TBUFF o.k.
M SosRegisterSem: malloc/realloc table
M SosRegisterSem: add sem >SEM_DB_SYNC< for wptype 0x73
M ThrRegisterSem: init SEM_DB_SYNC o.k.
M SosRegisterSem: add sem >SEM_DB_TTAB< for wptype 0x73
M ThrRegisterSem: init SEM_DB_TTAB o.k.
M SosRegisterSem: add sem >SEM_DB_SNTAB< for wptype 0x73
M ThrRegisterSem: init SEM_DB_SNTAB o.k.
M SosRegisterSem: add sem >SEM_DB_IREC< for wptype 0x73
M ThrRegisterSem: init SEM_DB_IREC o.k.
M SosRegisterSem: add sem >SEM_DB_FTAB< for wptype 0x73
M ThrRegisterSem: init SEM_DB_FTAB o.k.
M SosRegisterSem: add sem >SEM_LOGFILE_KEY< for wptype 0x77
M ThrRegisterSem: init SEM_LOGFILE_KEY o.k.
M SosRegisterSem: add sem >SEM_DB_TBUFF_P< for wptype 0x73
M ThrRegisterSem: init SEM_DB_TBUFF_P o.k.
M SosRegisterSem: add sem >SEM_ENQ_REQ_KEY< for wptype 0x77
M ThrRegisterSem: init SEM_ENQ_REQ_KEY o.k.
M SosRegisterSem: add sem >SEM_ENQ_TABLE_KEY< for wptype 0x77
M ThrRegisterSem: init SEM_ENQ_TABLE_KEY o.k.
M SosRegisterSem: add sem >SEM_SAPCOM_1< for wptype 0x73
M ThrRegisterSem: init SEM_SAPCOM_1 o.k.
M SosRegisterSem: malloc/realloc table
M SosRegisterSem: add sem >SEM_SAPCOM_2< for wptype 0x73
M ThrRegisterSem: init SEM_SAPCOM_2 o.k.
M SosRegisterSem: add sem >SEM_VMS_FIXADR_KEY< for wptype 0x73
M ThrRegisterSem: init SEM_VMS_FIXADR_KEY o.k.
M SosRegisterSem: add sem >SEM_DB_CUA_BUFFER< for wptype 0x73
M ThrRegisterSem: init SEM_DB_CUA_BUFFER o.k.
M SosRegisterSem: add sem >SEM_RSPO_ADMIN< for wptype 0x73
M ThrRegisterSem: init SEM_RSPO_ADMIN o.k.
M SosRegisterSem: add sem >SEM_DB_OBJ_BUFFER< for wptype 0x73
M ThrRegisterSem: init SEM_DB_OBJ_BUFFER o.k.
M SosRegisterSem: add sem >SEM_CCMS_AS_MONI_KEY< for wptype 0x77
M ThrRegisterSem: init SEM_CCMS_AS_MONI_KEY o.k.
M SosRegisterSem: add sem >SEM_EG_ADM< for wptype 0x77
M ThrRegisterSem: init SEM_EG_ADM o.k.
M SosRegisterSem: add sem >SEM_STAT_BUF< for wptype 0x73
M ThrRegisterSem: init SEM_STAT_BUF o.k.
M SosRegisterSem: add sem >SEM_WP_ADM_KEY< for wptype 0x73
M ThrRegisterSem: init SEM_WP_ADM_KEY o.k.
M SosRegisterSem: add sem >SEM_RSPO_CACHE< for wptype 0x73
M ThrRegisterSem: init SEM_RSPO_CACHE o.k.
M SosRegisterSem: malloc/realloc table
M SosRegisterSem: add sem >SEM_AUDIT_SHM< for wptype 0x73
M ThrRegisterSem: init SEM_AUDIT_SHM o.k.
M SosRegisterSem: add sem >SEM_RSPO_RFC< for wptype 0x73
M ThrRegisterSem: init SEM_RSPO_RFC o.k.
M SosRegisterSem: add sem >SEM_AB_VMIT< for wptype 0x73
M ThrRegisterSem: init SEM_AB_VMIT o.k.
M SosRegisterSem: add sem >SEM_ENQID_KEY< for wptype 0x73
M ThrRegisterSem: init SEM_ENQID_KEY o.k.
M SosRegisterSem: add sem >SEM_ATRA_KEY< for wptype 0x73
M ThrRegisterSem: init SEM_ATRA_KEY o.k.
M SosRegisterSem: add sem >SEM_COV_KEY< for wptype 0x73
M ThrRegisterSem: init SEM_COV_KEY o.k.
M SosRegisterSem: add sem >SEM_ZDATE_TIMEINFO< for wptype 0x73
M ThrRegisterSem: init SEM_ZDATE_TIMEINFO o.k.
M SosRegisterSem: add sem >SEM_DB_OTR_BUFFER< for wptype 0x73
M ThrRegisterSem: init SEM_DB_OTR_BUFFER o.k.
M SosRegisterSem: add sem >SEM_DB_ESM_BUFFER< for wptype 0x73
M ThrRegisterSem: init SEM_DB_ESM_BUFFER o.k.
M SosRegisterSem: add sem >SEM_RTM_KEY< for wptype 0x73
M ThrRegisterSem: init SEM_RTM_KEY o.k.
M SosRegisterSem: malloc/realloc table
M SosRegisterSem: add sem >SEM_JAVA_1< for wptype 0x1
M ThrRegisterSem: init SEM_JAVA_1 o.k.
M SosRegisterSem: add sem >SEM_DBG_SESSION_BPS< for wptype 0x73
M ThrRegisterSem: init SEM_DBG_SESSION_BPS o.k.
M SosRegisterSem: add sem >SEM_HST_KEY< for wptype 0x73
M ThrRegisterSem: init SEM_HST_KEY o.k.
M ThCallHooks: hook >ThrRegisterSem< o.k.
M calling db_connect ...
B Loading DB library '/usr/sap/AX2/DVEBMGS50/exe/dboraslib.so' ...
M DlLoadLib() success: dlopen("/usr/sap/AX2/DVEBMGS50/exe/dboraslib.so"), hdl 0
B Library '/usr/sap/AX2/DVEBMGS50/exe/dboraslib.so' loaded
B Version of '/usr/sap/AX2/DVEBMGS50/exe/dboraslib.so' is "720.00", patchlevel (0.81)
C Register application info.
C Oracle client version: 10.2.0.4.0, V5, default build, (dbsl 720 170211, UNICODE[2])
C Installed Oracle client patches:
C # Unique Patch ID: 12114073Created on 15 Jan 2010, 09:30:31 hrs PST8PDT
C # Patch 8732366 : Created on 27 Jul 2009, 15:49:18 hrs CEST
C # Patch 6944036 : Created on 3 Jun 2008, 23:35:37 hrs PST8PDT
C # Patch 6826661 : Created on 20 May 2008, 00:23:58 hrs PST8PDT
C # Patch 6775231 : Created on 2 Dec 2008, 21:45:40 hrs PST8PDT
C # Unique Patch ID: 12924916Created on 13 Sep 2010, 23:47:52 hrs PST8PDT
C Client NLS setting (by OCINlsGetInfo(con=0)): 'AMERICAN_AMERICA.UTF16'
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@AX2 on connection 0 (nls 0) ... (dbsl 720 170211, UNICODE[2])
C Attaching to database server AX2 (con=0, svchp=6aae3d8, srvhp=6ab20b8)
C Starting user session: OCISessionBegin(con=0, usr='/',svc=6aae3d8, srv=6ab20b8, usr=6af1ba0)
C Connected to session 23.
C Now '/@AX2' is connected: con=0, nls=0, session_id=23.
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con=0, svc=6aae3d8, usr=6af1ba0)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@AX2 on connection 0 (nls 0) ... (dbsl 720 170211, UNICODE[2])
C Starting user session: OCISessionBegin(con=0, usr='SAPSR3', svc=6aae3d8, srv=6ab20b8, usr=6af1ba0)
C Connected to session 23.
C Now 'SAPSR3/<pwd>@AX2' is connected: con=0, nls=0, session_id=23.
C con=0, V$NLS_PARAMETERS: NLS_LANG=AMERICAN_AMERICA.UTF8, NLS_NCHAR_CHARACTERSET=UTF8, UNI_NON=FALSE
C Nls CharacterSet (V$NLS) NatioCharSet (V$NLS) EnvHp ErrHp ErrBt
C 0 (UTF16) UTF8 (AL16UTF16) UTF8 6a95d10 6a9d810 6aae4a8
C DB instance AX2 is running on sachin with ORACLE version 11.2.0.2.0 since MAY 29, 2011, 22:43:07.
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX BC HC PRM RCT FRC TIM MAX OPT Date Time DBHost Program
B 000 000 R/3 000000000 ACTIVE NO NO NO YES NO NO 000 255 255 20110529 224405 sachin
M ThInit: db_connect o.k.
M ICT: ict/odata_compatible_urls=0
M ICT: HTTP compression only above 1024 bytes
M ICT: maximum size of HTTP messages: 101 MB
M ICT: exclude compression: .zip,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif,.png,.swc,*.swf
M ICT: exclude_compression: *.zip
M ICT: exclude_compression: *.rar
M ICT: exclude_compression: *.arj
M ICT: exclude_compression: *.z
M ICT: exclude_compression: *.gz
M ICT: exclude_compression: *.tar
M ICT: exclude_compression: *.lzh
M ICT: exclude_compression: *.cab
M ICT: exclude_compression: *.hqx
M ICT: exclude_compression: *.ace
M ICT: exclude_compression: *.jar
M ICT: exclude_compression: *.ear
M ICT: exclude_compression: *.war
M ICT: exclude_compression: *.css
M ICT: exclude_compression: *.pdf
M ICT: exclude_compression: *.gzip
M ICT: exclude_compression: *.uue
M ICT: exclude_compression: *.bz2
M ICT: exclude_compression: *.iso
M ICT: exclude_compression: *.sda
M ICT: exclude_compression: *.sar
M ICT: exclude_compression: *.gif
M ICT: exclude_compression: *.png
M ICT: exclude_compression: *.swc
M ICT: exclude_compression: *.swf
M ThJInit: init java layer
M ThPlgRegister: register handler for protocol 17 (HTTP(JAVA))
M ThJInit: java not active
M Sun May 29 22:44:10 2011
M
M read th-profile-values from sys_adm
M
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 7f9c80b56000, size: 4400000)
M SHM_ROLL_AREA (addr: 7f9c23573000, size: 268435456)
M SHM_PAGING_AREA (addr: 7f9c13573000, size: 268435456)
M SHM_ROLL_ADM (addr: 7f9c80f8a000, size: 11142696)
M SHM_PAGING_ADM (addr: 7f9c132f2000, size: 2622496)
M ThCreateNoBuffer allocated 564152 bytes for 1000 entries at 7f9c0c824000
M ThCreateNoBuffer index size: 3000 elems
Thanks
SachinI am using below java version.
Java version 1.4.2
java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM ( build 2.3, J2RE 1.4.2 IBM J9 2.3 Linux amd64-64 j9vmxa64142ifx-20101119 (JIT Enable)
j9VM - 20101118_68931_LHdSMr
JIT - 20090210_1447ifx2_r8
GC - 200902_24
Br,
Sachin -
Disp+work process starts than dies in SAP R/3 4.7 Ent. server
I stopped SAP R/3 4.7 ent server for backup, when i restart the Microsoft management console the disp+work process turns yellow to grey.
Can any one help me to solve this problem???
O/s :Windows2000 server
database :SAPDB 7.3
Here iam attaching the log files......
sapstart,dev_rfc,dev_w0,dev_disp,stderr2,stderr3 and stderr4
sapstart.trc:
SAPSRV\Administrator is starting R/3 System at 2006/05/13 14:35:56
SAP-R/3-Startup Program
Starting at 2006/05/13 14:35:56
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3352) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3188) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3856) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/13 14:44:15
(1264) Parent Shutdown at 2006/05/13 14:44:15
(1264) kill(3856) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/13 14:44:48
SAP-R/3-Startup Program
Starting at 2006/05/13 14:44:48
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3872) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3876) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3844) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/13 16:24:21
(1264) Parent Shutdown at 2006/05/13 16:24:21
(1264) kill(3844) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/13 17:53:25
SAP-R/3-Startup Program
Starting at 2006/05/13 17:53:25
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(2872) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(948) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3468) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/14 14:36:33
(1264) Parent Shutdown at 2006/05/14 14:36:33
(1264) kill(3468) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/14 14:41:50
SAP-R/3-Startup Program
Starting at 2006/05/14 14:41:50
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3220) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3236) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3244) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/14 14:47:09
(1264) Parent Shutdown at 2006/05/14 14:47:09
(1264) kill(3244) failed.
2.dev_w0
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sun May 14 14:42:14 2006
B create_con (con_name=R/3)
B Loading DB library '5\dbadaslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(5\dbadaslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library '5\dbadaslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 3296
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3296) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 20304 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00100040, size: 1985344)
M DpShMCreate: allocated sys_adm at 00100040
M DpShMCreate: allocated wp_adm at 00100560
M DpShMCreate: allocated tm_adm_list at 001054B0
M DpShMCreate: allocated tm_adm at 001054D8
M DpShMCreate: allocated wp_ca_adm at 002A2198
M DpShMCreate: allocated appc_ca_adm at 002A67E8
M DpShMCreate: allocated comm_adm_list at 002A7F58
M DpShMCreate: allocated comm_adm at 002A7F70
M DpShMCreate: allocated ca_info at 002D6D70
M DpShMCreate: allocated wall_adm at 002D6D78
X
X Sun May 14 14:42:16 2006
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library '5\dbadaslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(5\dbadaslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library '5\dbadaslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1102]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SAPSRV_ER2_01 on host SAPSRV (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Sun May 14 14:42:16 2006
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3296) [dpnttool.c 346]
3. dev_rfc.trc
ERROR file opened at 20060419 104033 India Standard , SAP-REL 620,0,1574 RFC-VER 3 673347 MT-SL
T:73832 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1422
T:73832 <* RfcReceive [1] : returns 3:RFC_SYS_EXCEPTION
T:73832 <* RfcCallReceive [1] : returns 3:RFC_SYS_EXCEPTION
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:52:34 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:52:35 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:53:15 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:55:12 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:58:17 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:01:11 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:02:21 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:02:22 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:05:32 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcSendData [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcDispatch [1] : returns 18:RFC_INVALID_HANDLE
ERROR file opened at 20060421 202203 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
T:4468 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:4468 <* RfcDispatch [1] : returns 1:RFC_FAILURE
ERROR file opened at 20060428 194717 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
>TS> Fri Apr 28 19:47:18 2006
T:73164 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:73164 <* RfcDispatch [1] : returns 1:RFC_FAILURE
ERROR file opened at 20060512 214308 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
T:5504 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:5504 <* RfcDispatch [1] : returns 1:RFC_FAILURE
4.dev_disp.trc
trc file: "dev_disp", trc level: 1, release: "620"
Sun May 14 14:42:07 2006
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 3244
***LOG Q00=> DpSapEnvInit, DPStart (01 3244) [dpxxdisp.c 978]
shared lib "dw_xml.dll" version 674 successfully loaded
shared lib "dw_xtc.dll" version 674 successfully loaded
shared lib "dw_stl.dll" version 674 successfully loaded
Sun May 14 14:42:11 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 20304 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 001C0040, size: 1985344)
DpShMCreate: allocated sys_adm at 001C0040
DpShMCreate: allocated wp_adm at 001C0560
DpShMCreate: allocated tm_adm_list at 001C54B0
DpShMCreate: allocated tm_adm at 001C54D8
DpShMCreate: allocated wp_ca_adm at 00362198
DpShMCreate: allocated appc_ca_adm at 003667E8
DpShMCreate: allocated comm_adm_list at 00367F58
DpShMCreate: allocated comm_adm at 00367F70
DpShMCreate: allocated ca_info at 00396D70
DpShMCreate: allocated wall_adm at 00396D78
Sun May 14 14:42:12 2006
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
<ES> 2457 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( SAPSRV) [dpxxdisp.c 9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Sun May 14 14:42:13 2006
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Sun May 14 14:42:52 2006
ERROR => W0 (pid 3296) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W1 (pid 3304) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
ERROR => W2 (pid 3312) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
ERROR => W3 (pid 3320) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 3328) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W5 (pid 3336) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W6 (pid 3344) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W7 (pid 3784) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
ERROR => W8 (pid 3820) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 3584) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
ERROR => W10 (pid 3668) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
ERROR => W11 (pid 3632) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
ERROR => W12 (pid 3652) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 3616) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W13
ERROR => W14 (pid 3648) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W14
ERROR => W15 (pid 3628) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W15
ERROR => W16 (pid 3656) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W16
ERROR => W17 (pid 4024) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W17
ERROR => W18 (pid 3928) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W18
ERROR => W19 (pid 3880) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W19
ERROR => W20 (pid 3432) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W20
ERROR => W21 (pid 3124) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W21
ERROR => W22 (pid 3800) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W22
ERROR => W23 (pid 3804) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W23
ERROR => W24 (pid 3812) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W24
ERROR => W25 (pid 3832) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W25
ERROR => W26 (pid 3480) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W26
my types changed after wp death/restart 0xbd --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Sun May 14 14:42:57 2006
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3244) [dpxxdisp.c 7883]
5.stderr2
D:\usr\sap\ER2\DVEBMGS01\work>set DBNAME=ERc
D:\usr\sap\ER2\DVEBMGS01\work>if "" == "" (set DB_USERKEY="c" ) else (set DB_USERKEY="c_J2EE" )
D:\usr\sap\ER2\DVEBMGS01\work>dbmcli -U "c" dbm_version VERSION 1>dbversion.out
D:\usr\sap\ER2\DVEBMGS01\work>findstr -i "OK" dbversion.out 1>dbmcli.err
D:\usr\sap\ER2\DVEBMGS01\work>if errorlevel 1 goto err_dbm
D:\usr\sap\ER2\DVEBMGS01\work>findstr -i "7.4" dbversion.out 1>adatmp
D:\usr\sap\ER2\DVEBMGS01\work>if errorlevel 1 (set dbmcli_cmd="db_warm" ) else (set dbmcli_cmd="db_online" )
D:\usr\sap\ER2\DVEBMGS01\work>dbmcli -U "c" "db_warm"
OK
Database ER2 successfully started !
6. stderr3
rslgwr1(21): Searching for overlap point in pre-existing SysLog file...
7.stderr4
maximum pfclock time: 4294sec (1)
work process W0 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W2 died => tskh_init: db_connect
IcmBndMain: handle for "localhost:8001" successfully sent to server
maximum pfclock time: 4294sec (1)
work process W23 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1155
adjust_clock: delta 1106
work process W26 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W10 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 757
work process W20 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 9312
adjust_clock: delta 1040
work process W7 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W18 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W12 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W1 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W14 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 760
work process W11 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1129
work process W25 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 3589
adjust_clock: delta 631
work process W24 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 757
adjust_clock: delta 652
adjust_clock: delta 514
work process W8 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W22 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1192
work process W21 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W3 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W16 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1617
adjust_clock: delta 1609
work process W5 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 9714
work process W17 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 2063
work process W19 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 746
work process W6 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 2040
work process W4 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W15 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1089
work process W13 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W9 died => tskh_init: db_connect
ICM up and operational (pid: 3272) ***
Shutdown ICM server ....maximum pfclock time: 4294sec (1)
ICM shutdown completed (pid: 3272) ***
DISPATCHER EMERGENCY SHUTDOWN => DpEnvCheck: no more work processes
maximum pfclock time: 4294sec (1)Hi Bapujee,
I upgraded kernel 6.20 (Patch level 1602)as per the details you mentioned. when i restarted the server the message server starts perfectly,but disp+work process turns to yellow than dies(during that time WP Table is blank).
Also attaching dev_w0 file.
thanks & regards,
sreepathi
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Tue May 16 23:38:55 2006
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ER2\SYS\exe\run\dbadaslib.dll' ...
B Library 'D:\usr\sap\ER2\SYS\exe\run\dbadaslib.dll' loaded
B Version of 'D:\usr\sap\ER2\SYS\exe\run\dbadaslib.dll' is "620.02", patchlevel (0.1599)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 1602
M intno 20020600
M make: multithreaded, ASCII
M pid 3180
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3180) [dpxxdisp.c 1088]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 12920 (760)
M DpShMCreate: sizeof(tm_adm) 1835536 (9132)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05D10040, size: 2122960)
M DpShMCreate: allocated sys_adm at 05D10040
M DpShMCreate: allocated wp_adm at 05D10678
M DpShMCreate: allocated tm_adm_list at 05D138F0
M DpShMCreate: allocated tm_adm at 05D13918
M DpShMCreate: allocated wp_ca_adm at 05ED3B28
M DpShMCreate: allocated appc_ca_adm at 05ED8178
M DpShMCreate: allocated comm_adm_list at 05ED98E8
M DpShMCreate: allocated comm_adm at 05ED9900
M DpShMCreate: allocated ca_info at 05F08700
M DpShMCreate: allocated wall_adm at 05F08708
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Tue May 16 23:38:57 2006
M calling db_connect ...
C
C DBADASLIB : version 620.02
C SAPDB shared library (dbadaslib) patchlevels (last 10)
C (0.1599) Set isolation level calls optimized (note 762712)
C (0.1491) ThGetWpId corrected (note 624930)
C (0.1412) Support of SAPDB database hints (note 652096)
C (0.1411) LobGetpiece returns a failure if no data available (note 720343)
C (0.1355) SAPDB supports DBSL_CMD_INI_KRN_CALLBACK (note 624930)
C (0.1352) CHECKPOINT NOWAIT removed (note 708201)
C (0.1278) UPDSTAT without tracefile (note 696689)
C (0.1267) Explain problem with RAW values and IN-clause fixed (note 692188)
C (0.1189) Explain for database version 7.5 changed (note 680586)
C (0.1115) Object consistency (note 650475)
C
C
C INFO : SQLOPT= -I 0 -t 0 -F SAPDB.3180.pct
C Precompiler Runtime : C-PreComp 7.3.1 Build 007-000-087-566
C Precompiler runtime is SAP DB 7.3.1.007
C *** ERROR => Using non supported SAP DB precompiler runtime version: 7.3.1.007
[dbslada.c 5093]
C *** ERROR => Min. version for this release must be 7.3.1.010
[dbslada.c 5095]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1200]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8812]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M rq_info = 0
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SAPSRV_ER2_01 on host SAPSRV (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Tue May 16 23:38:57 2006
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8957
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 233]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3180) [dpnttool.c 356]
Message was edited by: Sreepathi -
Disp+work process starts than dies in SAP R/3 4.7 Enterprise server
I stopped SAP R/3 4.7 ent server for backup, when i restart the Microsoft management console the disp+work process turns yellow to grey.
Can any one help me to solve this problem???
O/s :Windows2000 server
database :SAPDB 7.3
Here iam attaching the log files......
sapstart,dev_rfc,dev_w0,dev_disp,stderr2,stderr3 and stderr4
sapstart.trc:
SAPSRV\Administrator is starting R/3 System at 2006/05/13 14:35:56
SAP-R/3-Startup Program
Starting at 2006/05/13 14:35:56
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3352) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3188) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3856) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/13 14:44:15
(1264) Parent Shutdown at 2006/05/13 14:44:15
(1264) kill(3856) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/13 14:44:48
SAP-R/3-Startup Program
Starting at 2006/05/13 14:44:48
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3872) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3876) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3844) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/13 16:24:21
(1264) Parent Shutdown at 2006/05/13 16:24:21
(1264) kill(3844) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/13 17:53:25
SAP-R/3-Startup Program
Starting at 2006/05/13 17:53:25
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(2872) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(948) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3468) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/14 14:36:33
(1264) Parent Shutdown at 2006/05/14 14:36:33
(1264) kill(3468) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/14 14:41:50
SAP-R/3-Startup Program
Starting at 2006/05/14 14:41:50
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3220) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3236) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3244) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/14 14:47:09
(1264) Parent Shutdown at 2006/05/14 14:47:09
(1264) kill(3244) failed.
2.dev_w0
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sun May 14 14:42:14 2006
B create_con (con_name=R/3)
B Loading DB library '5\dbadaslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(5\dbadaslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library '5\dbadaslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 3296
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3296) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 20304 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00100040, size: 1985344)
M DpShMCreate: allocated sys_adm at 00100040
M DpShMCreate: allocated wp_adm at 00100560
M DpShMCreate: allocated tm_adm_list at 001054B0
M DpShMCreate: allocated tm_adm at 001054D8
M DpShMCreate: allocated wp_ca_adm at 002A2198
M DpShMCreate: allocated appc_ca_adm at 002A67E8
M DpShMCreate: allocated comm_adm_list at 002A7F58
M DpShMCreate: allocated comm_adm at 002A7F70
M DpShMCreate: allocated ca_info at 002D6D70
M DpShMCreate: allocated wall_adm at 002D6D78
X
X Sun May 14 14:42:16 2006
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library '5\dbadaslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(5\dbadaslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library '5\dbadaslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1102]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SAPSRV_ER2_01 on host SAPSRV (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Sun May 14 14:42:16 2006
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3296) [dpnttool.c 346]
3. dev_rfc.trc
ERROR file opened at 20060419 104033 India Standard , SAP-REL 620,0,1574 RFC-VER 3 673347 MT-SL
T:73832 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1422
T:73832 <* RfcReceive [1] : returns 3:RFC_SYS_EXCEPTION
T:73832 <* RfcCallReceive [1] : returns 3:RFC_SYS_EXCEPTION
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:52:34 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:52:35 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:53:15 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:55:12 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:58:17 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:01:11 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:02:21 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:02:22 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:05:32 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcSendData [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcDispatch [1] : returns 18:RFC_INVALID_HANDLE
ERROR file opened at 20060421 202203 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
T:4468 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:4468 <* RfcDispatch [1] : returns 1:RFC_FAILURE
ERROR file opened at 20060428 194717 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
>TS> Fri Apr 28 19:47:18 2006
T:73164 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:73164 <* RfcDispatch [1] : returns 1:RFC_FAILURE
ERROR file opened at 20060512 214308 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
T:5504 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:5504 <* RfcDispatch [1] : returns 1:RFC_FAILURE
4.dev_disp.trc
trc file: "dev_disp", trc level: 1, release: "620"
Sun May 14 14:42:07 2006
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 3244
***LOG Q00=> DpSapEnvInit, DPStart (01 3244) [dpxxdisp.c 978]
shared lib "dw_xml.dll" version 674 successfully loaded
shared lib "dw_xtc.dll" version 674 successfully loaded
shared lib "dw_stl.dll" version 674 successfully loaded
Sun May 14 14:42:11 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 20304 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 001C0040, size: 1985344)
DpShMCreate: allocated sys_adm at 001C0040
DpShMCreate: allocated wp_adm at 001C0560
DpShMCreate: allocated tm_adm_list at 001C54B0
DpShMCreate: allocated tm_adm at 001C54D8
DpShMCreate: allocated wp_ca_adm at 00362198
DpShMCreate: allocated appc_ca_adm at 003667E8
DpShMCreate: allocated comm_adm_list at 00367F58
DpShMCreate: allocated comm_adm at 00367F70
DpShMCreate: allocated ca_info at 00396D70
DpShMCreate: allocated wall_adm at 00396D78
Sun May 14 14:42:12 2006
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
<ES> 2457 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( SAPSRV) [dpxxdisp.c 9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Sun May 14 14:42:13 2006
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Sun May 14 14:42:52 2006
ERROR => W0 (pid 3296) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W1 (pid 3304) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
ERROR => W2 (pid 3312) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
ERROR => W3 (pid 3320) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 3328) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W5 (pid 3336) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W6 (pid 3344) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W7 (pid 3784) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
ERROR => W8 (pid 3820) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 3584) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
ERROR => W10 (pid 3668) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
ERROR => W11 (pid 3632) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
ERROR => W12 (pid 3652) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 3616) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W13
ERROR => W14 (pid 3648) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W14
ERROR => W15 (pid 3628) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W15
ERROR => W16 (pid 3656) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W16
ERROR => W17 (pid 4024) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W17
ERROR => W18 (pid 3928) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W18
ERROR => W19 (pid 3880) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W19
ERROR => W20 (pid 3432) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W20
ERROR => W21 (pid 3124) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W21
ERROR => W22 (pid 3800) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W22
ERROR => W23 (pid 3804) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W23
ERROR => W24 (pid 3812) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W24
ERROR => W25 (pid 3832) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W25
ERROR => W26 (pid 3480) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W26
my types changed after wp death/restart 0xbd --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Sun May 14 14:42:57 2006
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3244) [dpxxdisp.c 7883]
5.stderr2
D:\usr\sap\ER2\DVEBMGS01\work>set DBNAME=ERc
D:\usr\sap\ER2\DVEBMGS01\work>if "" == "" (set DB_USERKEY="c" ) else (set DB_USERKEY="c_J2EE" )
D:\usr\sap\ER2\DVEBMGS01\work>dbmcli -U "c" dbm_version VERSION 1>dbversion.out
D:\usr\sap\ER2\DVEBMGS01\work>findstr -i "OK" dbversion.out 1>dbmcli.err
D:\usr\sap\ER2\DVEBMGS01\work>if errorlevel 1 goto err_dbm
D:\usr\sap\ER2\DVEBMGS01\work>findstr -i "7.4" dbversion.out 1>adatmp
D:\usr\sap\ER2\DVEBMGS01\work>if errorlevel 1 (set dbmcli_cmd="db_warm" ) else (set dbmcli_cmd="db_online" )
D:\usr\sap\ER2\DVEBMGS01\work>dbmcli -U "c" "db_warm"
OK
Database ER2 successfully started !
6. stderr3
rslgwr1(21): Searching for overlap point in pre-existing SysLog file...
7.stderr4
maximum pfclock time: 4294sec (1)
work process W0 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W2 died => tskh_init: db_connect
IcmBndMain: handle for "localhost:8001" successfully sent to server
maximum pfclock time: 4294sec (1)
work process W23 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1155
adjust_clock: delta 1106
work process W26 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W10 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 757
work process W20 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 9312
adjust_clock: delta 1040
work process W7 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W18 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W12 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W1 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W14 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 760
work process W11 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1129
work process W25 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 3589
adjust_clock: delta 631
work process W24 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 757
adjust_clock: delta 652
adjust_clock: delta 514
work process W8 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W22 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1192
work process W21 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W3 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W16 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1617
adjust_clock: delta 1609
work process W5 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 9714
work process W17 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 2063
work process W19 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 746
work process W6 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 2040
work process W4 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W15 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1089
work process W13 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W9 died => tskh_init: db_connect
ICM up and operational (pid: 3272) ***
Shutdown ICM server ....maximum pfclock time: 4294sec (1)
ICM shutdown completed (pid: 3272) ***
DISPATCHER EMERGENCY SHUTDOWN => DpEnvCheck: no more work processes
maximum pfclock time: 4294sec (1)these are the content of some log files plz help me out my sap system is not starting my work process is ending in some ended status
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( sap) [dpxxdisp.c 9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Thu Oct 15 20:22:46 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Thu Oct 15 20:23:12 2009
ERROR => W0 (pid 3988) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W1 (pid 3996) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
ERROR => W2 (pid 4004) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
ERROR => W3 (pid 4016) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 4024) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W5 (pid 4032) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W6 (pid 4040) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W7 (pid 4048) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
ERROR => W8 (pid 4056) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 4064) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
ERROR => W10 (pid 4072) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
ERROR => W11 (pid 4080) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
ERROR => W12 (pid 4088) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 624) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W13
ERROR => W14 (pid 456) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W14
ERROR => W15 (pid 576) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W15
my types changed after wp death/restart 0xbf --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Thu Oct 15 20:23:17 2009
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3912) [dpxxdisp.c 7883]
trc file: "dev_ms", trc level: 1, release: "620"
[Thr 3908] Thu Oct 15 20:22:00 2009
[Thr 3908] MsSSetTrcLog: trc logging not active
[Thr 3908] relno 6200
[Thr 3908] patchlevel 0
[Thr 3908] patchno 665
[Thr 3908] intno 20020600
[Thr 3908] pid 3904
[Thr 3908] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3904) [msxxserv.c 1524]
[Thr 3908] MsHttpPortInsert: set HTTP state to LISTEN
[Thr 3908] MsHttpOwnDomain: own domain[1] = microsoft.com
[Thr 3908] *** I listen to port sapmsDEV (3600) ***
[Thr 3908] *** HTTP LISTEN ***
[Thr 3908] *** I listen to HTTP port 8100 ***
[Thr 3908] CUSTOMER KEY: >H2132125860<
[Thr 3908] Thu Oct 15 20:23:17 2009
[Thr 3908] ***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 1094]
[Thr 3908] *** ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv.c 8523]
[Thr 3908] *** ERROR => MsSClientHandle: MsSRead C1 (sap_DEV_00), MSEINTERN [msxxserv.c 3662]
[Thr 3908] Thu Oct 15 20:33:37 2009
[Thr 3908] *** ERROR => MsSCheckConnections: no response from client C0 (192.168.1.25) after 300 secs received [msxxserv.c
2910]
[Thr 3908] *** ERROR => MsSCheckConnections: disconnect now [192.168.1.25] [msxxserv.c 2914]
[Thr 3936] Thu Oct 15 20:37:12 2009
[Thr 3936] MsSExit: received SIGINT (2)
[Thr 3936] ***LOG Q02=> MsSHalt, MSStop (Msg Server 3904) [msxxserv.c 4811]
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Oct 15 20:22:46 2009
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'F:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'F:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 3988
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3988) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 12032 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 055B0040, size: 1977072)
M DpShMCreate: allocated sys_adm at 055B0040
M DpShMCreate: allocated wp_adm at 055B0560
M DpShMCreate: allocated tm_adm_list at 055B3460
M DpShMCreate: allocated tm_adm at 055B3488
M DpShMCreate: allocated wp_ca_adm at 05750148
M DpShMCreate: allocated appc_ca_adm at 05754798
M DpShMCreate: allocated comm_adm_list at 05755F08
M DpShMCreate: allocated comm_adm at 05755F20
M DpShMCreate: allocated ca_info at 05784D20
M DpShMCreate: allocated wall_adm at 05784D28
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Thu Oct 15 20:22:48 2009
M calling db_connect ...
C Got ORACLE_HOME=F:\oracle\ora92 from environment
C
C Thu Oct 15 20:22:49 2009
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 ...
C Attaching to DB Server DEV (con_hdl=0,svchp=03BFC74C,svrhp=06D04FC4)
C
C Thu Oct 15 20:22:50 2009
C Starting user session (con_hdl=0,svchp=03BFC74C,srvhp=06D04FC4,usrhp=06D0D7A4)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9601]
C Try to connect with default password
C Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
C Starting user session (con_hdl=0,svchp=03BFC74C,srvhp=06D04FC4,usrhp=06D0D7A4)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9601]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 957] [dbsh 0957 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1102]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sap_DEV_00 on host sap (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Thu Oct 15 20:22:50 2009
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3988) [dpnttool.c 346]
trc file: "dev_w1", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Oct 15 20:22:36 2009
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'F:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'F:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 3996
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 1 3996) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 12032 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 055B0040, size: 1977072)
M DpShMCreate: allocated sys_adm at 055B0040
M DpShMCreate: allocated wp_adm at 055B0560
M DpShMCreate: allocated tm_adm_list at 055B3460
M DpShMCreate: allocated tm_adm at 055B3488
M DpShMCreate: allocated wp_ca_adm at 05750148
M DpShMCreate: allocated appc_ca_adm at 05754798
M DpShMCreate: allocated comm_adm_list at 05755F08
M DpShMCreate: allocated comm_adm at 05755F20
M DpShMCreate: allocated ca_info at 05784D20
M DpShMCreate: allocated wall_adm at 05784D28
X EmInit: MmSetImplementation( 2 ).
X <ES> client 1 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Thu Oct 15 20:22:44 2009
M calling db_connect ...
C
C Thu Oct 15 20:22:45 2009
C Got ORACLE_HOME=F:\oracle\ora92 from environment
C
C Thu Oct 15 20:22:49 2009
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 ...
C Attaching to DB Server DEV (con_hdl=0,svchp=07BD053C,svrhp=07BD27A4)
C
C Thu Oct 15 20:22:51 2009
C Starting user session (con_hdl=0,svchp=07BD053C,srvhp=07BD27A4,usrhp=07BDAF84)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9601]
C Try to connect with default password
C Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
C Starting user session (con_hdl=0,svchp=07BD053C,srvhp=07BD27A4,usrhp=07BDAF84)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9601]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 957] [dbsh 0957 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1102]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 1
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sap_DEV_00 on host sap (wp 1)
M * ERROR tskh_init: db_connect
M *
M * TIME Thu Oct 15 20:22:51 2009
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B dbtbxbuf: Buffer TBX_SINGLE not available
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 3996) [dpnttool.c 346] -
SAP work Process goes in run state,Users cannot login developer trace paste
Hi team,
We have a system which is at ECC6 release 701 ABAP + java system.
The work process frequently go in run state and since this is an IDES system, I always restart the system.
Please help me since i want tio know the root cause for the same.
The dev trace is as follows, and i beleive its a listener problem by the logs.
kernel runs with dp version 244000(ext=110000) (@(#) DPLIB-INT-VERSION-244000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 199004) [dpxxdisp.c 1287]
shared lib "dw_xml.dll" version 254 successfully loaded
shared lib "dw_xtc.dll" version 254 successfully loaded
shared lib "dw_stl.dll" version 254 successfully loaded
shared lib "dw_gui.dll" version 254 successfully loaded
shared lib "dw_mdm.dll" version 254 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Dec 13 08:26:23 2010
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0223.qqq.nxst) took 6 seconds
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
Mon Dec 13 08:26:29 2010
J2EE server info
start = TRUE
state = STARTED
pid = 200040
argv[0] = D:\usr\sap\BI7\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BI7\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BI7\SYS\profile\BI7_DVEBMGS00_q4de3gsy203
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=BI7
argv[7] = -DSAPMYNAME=q4de3gsy203_BI7_00
argv[8] = -DSAPPROFILE=D:\usr\sap\BI7\SYS\profile\BI7_DVEBMGS00_q4de3gsy203
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1694]
***LOG Q0K=> DpMsAttach, mscon ( q4de3gsy203) [dpxxdisp.c 12697]
DpStartStopMsg: send start message (myname is >q4de3gsy203_BI7_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 254
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Mon Dec 13 08:27:09 2010
my types changed after wp death/restart 0xbf --> 0xbd
my types changed after wp death/restart 0xbd --> 0xb5
my types changed after wp death/restart 0xb5 --> 0x95
Mon Dec 13 08:27:29 2010
ERROR => DpWPCheck: W1 (pid 199044) died (severity=0, status=0) [dpxxdisp.c 15841]
ERROR => DpWPCheck: W4 (pid 199912) died (severity=0, status=0) [dpxxdisp.c 15841]
ERROR => DpWPCheck: W6 (pid 192420) died (severity=0, status=0) [dpxxdisp.c 15841]
ERROR => DpWPCheck: W8 (pid 199528) died (severity=0, status=0) [dpxxdisp.c 15841]
ERROR => DpWPCheck: W9 (pid 198860) died (severity=0, status=0) [dpxxdisp.c 15841]
ERROR => DpWPCheck: W10 (pid 199664) died (severity=0, status=0) [dpxxdisp.c 15841]
my types changed after wp death/restart 0x95 --> 0x85
ERROR => DpWPCheck: W12 (pid 200036) died (severity=0, status=0) [dpxxdisp.c 15841]
Mon Dec 13 08:27:43 2010
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 316
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4882) [nixxi.cpp 4424]
ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Mon Dec 13 08:27:49 2010
ERROR => DpWPCheck: W0 (pid 200632) died (severity=0, status=0) [dpxxdisp.c 15841]
ERROR => DpWPCheck: W1 (pid 199044) died (severity=0, status=0) [dpxxdisp.c 15841]
my types changed after wp death/restart 0x85 --> 0x84
ERROR => DpWPCheck: W3 (pid 93796) died (severity=0, status=0) [dpxxdisp.c 15841]
ERROR => DpWPCheck: W4 (pid 199912) died (severity=0, status=0) [dpxxdisp.c 15841]
ERROR => DpWPCheck: W5 (pid 200484) died (severity=0, status=0) [dpxxdisp.c 15841]
ERROR => DpWPCheck: W6 (pid 192420) died (severity=0, status=0) [dpxxdisp.c 15841]
my types changed after wp death/restart 0x84 --> 0x80
ERROR => DpWPCheck: W8 (pid 199528) died (severity=0, status=0) [dpxxdisp.c 15841]
ERROR => DpWPCheck: W9 (pid 198860) died (severity=0, status=0) [dpxxdisp.c 15841]
ERROR => DpWPCheck: W10 (pid 199664) died (severity=0, status=0) [dpxxdisp.c 15841]
ERROR => DpWPCheck: W11 (pid 199720) died (severity=0, status=0) [dpxxdisp.c 15841]
ERROR => DpWPCheck: W12 (pid 200036) died (severity=0, status=0) [dpxxdisp.c 15841]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=493
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Dec 13 08:27:59 2010
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Dec 13 07:27:59 2010
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 200632 Ended no 2 0 0
1 DIA 199044 Ended no 3 0 0
2 DIA 200280 Ended no 1 0 0
3 DIA 93796 Ended no 2 0 0
4 DIA 199912 Ended no 3 0 0
5 DIA 200484 Ended no 2 0 0
6 UPD 192420 Ended no 3 0 0
7 ENQ 199792 Ended no 1 0 0
8 BTC 199528 Ended no 3 0 0
9 BTC 198860 Ended no 3 0 0
10 BTC 199664 Ended no 3 0 0
11 SPO 199720 Ended no 2 0 0
12 UP2 200036 Ended no 3 0 0
Dispatcher Queue Statistics Mon Dec 13 07:27:59 2010
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (184860) (SOFT_KILL)
Stop icman
killing process (190124) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:184860 HANDLE:440)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=493
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Dec 13 08:28:05 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:184860 HANDLE:440)
wait for end of icman
[DpProcDied] Process lives (PID:190124 HANDLE:448)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=493
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Dec 13 08:28:06 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:190124 HANDLE:448)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=493
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Dec 13 08:28:07 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:190124 HANDLE:448)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=493
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Dec 13 08:28:08 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:190124 HANDLE:448)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=493
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Dec 13 08:28:09 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:190124 HANDLE:448)
[DpProcDied] Process died (PID:200040 HANDLE:424)
DpStartStopMsg: send stop message (myname is >q4de3gsy203_BI7_00 <)
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Dec 13 08:28:10 2010
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 13043]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 368 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 368 (pos=3)
SiSelNRemove: removed sock 368
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpSemRq: key: 2, units: 1, timeout: -1
DpSemRel: key: 2, units: 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 368
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 199004) [dpxxdisp.c 11230]
Good Bye .....
Please revert if you need more information.
Regards,
Prasad ShettyHI Juan,
trace file for dev_w0 as asked
C Starting user session: OCISessionBegin(con_hdl=0, usr=SAPSR3/<pwd>, svchp=0000000013FB7748, srvhp=0000000013FB9B78, usrhp=0000000013EA1EC8)
C Now 'SAPSR3/<pwd>@BI7' is connected: con_hdl=0, nls_hdl=0, session_id=65.
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance BI7 is running on Q4DE3GSY203 with ORACLE version 10.2.0.2.0 since DEC 13, 2010, 08:38:55
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20101213 083926 Q4DE3GSY203
C build_stmt: reallocating stmt buffer: 256 -> 2000 characters
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif,*.png
I
I Mon Dec 13 08:40:14 2010
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000015860050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFEA010050, size: 61440000)
M SHM_PAGING_AREA (addr: 0000000015CA0050, size: 32768000)
M SHM_ROLL_ADM (addr: 0000000017BF0050, size: 633840)
M SHM_PAGING_ADM (addr: 0000000017C90050, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0000000017D20050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 000000000B490050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M Deactivate statistics hyper index locking
B dbntab: NTAB buffers attached
B dbntab: Buffer FTAB(hash header) (addr: 0000000017E400E0, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 0000000017E40330, size: 320072)
B dbntab: Buffer FTAB(item array) (addr: 0000000017E8E580, size: 1280000)
B dbntab: Buffer FTAB(data area) (addr: 0000000017FC6D80, size: 30720000)
B dbntab: Buffer IREC(hash header) (addr: 0000000019D200E0, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 0000000019D20330, size: 320072)
B dbntab: Buffer IREC(item array) (addr: 0000000019D6E580, size: 320000)
B dbntab: Buffer IREC(data area) (addr: 0000000019DBC780, size: 6144000)
B dbntab: Buffer STAB(hash header) (addr: 000000001A3A00E0, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 000000001A3A0330, size: 320072)
B dbntab: Buffer STAB(item array) (addr: 000000001A3EE580, size: 320000)
B dbntab: Buffer STAB(data area) (addr: 000000001A43C780, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 000000001A7300E0, size: 1944)
B dbntab: Buffer TTAB(anchor array) (addr: 000000001A730880, size: 320072)
B dbntab: Buffer TTAB(item array) (addr: 000000001A77EAD0, size: 800000)
B dbntab: Buffer TTAB(data area) (addr: 000000001A841FD0, size: 5840000)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B dbstat: TABSTAT buffer attached (addr: 000000001ADE9FB0)
B dbtbxbuf: Buffer TABL (addr: 000000001D7D0160, size: 30000000, end: 000000001F46C4E0)
B dbtbxbuf: Buffer TABLP (addr: 000000001F470160, size: 10240000, end: 000000001FE34160)
B dbexpbuf: Buffer EIBUF (addr: 000000001FE40170, size: 4194304, end: 0000000020240170)
B dbexpbuf: Buffer ESM (addr: 0000000020250170, size: 4194304, end: 0000000020650170)
B dbexpbuf: Buffer CUA (addr: 0000000020660170, size: 3072000, end: 000000002094E170)
B dbexpbuf: Buffer OTR (addr: 0000000020950170, size: 4194304, end: 0000000020D50170)
B dbcalbuf: Buffer CALE (addr: 0000000020D60050, size: 500000, end: 0000000020DDA170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates inside critical section: event_update_nocsec = 0
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 00000000141756E0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S intervals: query=50, rescan=1800, global=300 info=120
S processing queue enabled
S creating spool memory service RSPO-RCLOCKS at 000000002A0700D0
S doing lock recovery
S setting server cache root
S using server cache size 100 (prof=100)
S creating spool memory service RSPO-SERVERCACHE at 000000002A0704F0
S using messages for server info
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B max_blocking_factor = 5, max_in_blocking_factor = 5,
B min_blocking_factor = 5, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
S
S Mon Dec 13 08:40:15 2010
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A **GENER Trace switched on ***
A
A -PXA--
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 20564kb, dir_size: 20472kb.
A Attached to PXA (address 000007FFEDAB0050, size 300000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF4FEEA000 leng=20955136 end=000007FF512E6000)
A >> Shm MMADM area (addr=000007FF50392E80 leng=247168 end=000007FF503CF400)
A >> Shm MMDAT area (addr=000007FF503D0000 leng=15818752 end=000007FF512E6000)
A RFC Destination> destination q4de3gsy203_BI7_00 host q4de3gsy203 system BI7 systnr 0 (q4de3gsy203_BI7_00)
A RFC Options> H=q4de3gsy203,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 27042 bytes at 000000002A9E0050
N
N Mon Dec 13 08:40:16 2010
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\BI7\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\BI7\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N
N Mon Dec 13 08:40:17 2010
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.254.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [22]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
E Profile-Parameter: enque/deque_wait_answer = FALSE
E Profile-Parameter: enque/sync_dequeall = 0
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
S
S Mon Dec 13 08:40:19 2010
S found spool memory service RSPO-ACTIONS at 000000002A07A230
A
A Mon Dec 13 08:40:20 2010
A **GENER Trace switched off ***
M SosICreateNewAnchorArray: sos_search_anchor_semantics = 1
C
C Mon Dec 13 08:40:21 2010
C build_stmt: reallocating stmt buffer: 2000 -> 3002 characters
B table logging switched on for client '800'
M
M Mon Dec 13 08:40:23 2010
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 000000000AFC0050
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 000000000AFC07C0
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 000000000AFC0800
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 000000000AFC080C
M rdisp/rb_cleaned_rfc = 0
M
M Mon Dec 13 08:40:27 2010
M Deactivate ASTAT hyper index locking
M
M Mon Dec 13 08:44:30 2010
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host q4de3gsy203 / sapgw00
M * ERROR program dbmrfc@sapdb not registered
M *
M * TIME Mon Dec 13 08:44:30 2010
M * RELEASE 700
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 679
M * MODULE gwr3cpic.c
M * LINE 1835
M * DETAIL TP dbmrfc@sapdb not registered
M * COUNTER 15
M *
M *****************************************************************************
M
A RFC 1485 CONVID 21905907
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLSADC (Transaction: )
A RFC> User: RANGUPTA (Client: 001)
A RFC> Destination: SAPDB_DBM_DAEMON (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 21904860, {D18C06E0-7859-F141-92A8-005056956B4B})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLSADC)
A RFC SERVER> Called function module: DBM_CONNECT_PUR
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M Mon Dec 13 08:45:54 2010
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host q4de3gsy203 / sapgw00
M * ERROR program dbmrfc@sapdb not registered
M *
M * TIME Mon Dec 13 08:45:54 2010
M * RELEASE 700
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 679
M * MODULE gwr3cpic.c
M * LINE 1835
M * DETAIL TP dbmrfc@sapdb not registered
M * COUNTER 30
M *
M *****************************************************************************
M
A RFC 1485 CONVID 21998657
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLSADC (Transaction: )
A RFC> User: RANGUPTA (Client: 001)
A RFC> Destination: SAPDB_DBM_DAEMON (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 21997642, {038D06E0-8E49-F147-92A8-005056956B4B})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLSADC)
A RFC SERVER> Called function module: DBM_CONNECT_PUR
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M Mon Dec 13 08:48:12 2010
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host q4de3gsy203 / sapgw00
M * ERROR program dbmrfc@sapdb not registered
M *
M * TIME Mon Dec 13 08:48:12 2010
M * RELEASE 700
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 679
M * MODULE gwr3cpic.c
M * LINE 1835
M * DETAIL TP dbmrfc@sapdb not registered
M * COUNTER 45
M *
M *****************************************************************************
M
A RFC 1485 CONVID 22146986
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLSADC (Transaction: )
A RFC> User: RANGUPTA (Client: 001)
A RFC> Destination: SAPDB_DBM_DAEMON (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 22145986, {558D06E0-45BF-F199-92A8-005056956B4B})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLSADC)
A RFC SERVER> Called function module: DBM_CONNECT_PUR
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M Mon Dec 13 08:49:33 2010
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host q4de3gsy203 / sapgw00
M * ERROR program dbmrfc@sapdb not registered
M *
M * TIME Mon Dec 13 08:49:33 2010
M * RELEASE 700
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 679
M * MODULE gwr3cpic.c
M * LINE 1835
M * DETAIL TP dbmrfc@sapdb not registered
M * COUNTER 60
M *
M *****************************************************************************
It is a bit large will this do ?
Regards,
Prasad
Maybe you are looking for
-
Accessing a public array from extra class.
I am trying to access a public array that I declared in my main class from a separate class. I am a bit confused about why this is not working. The method search in the extra class is called in the extra class in part one of the nextKeystream method.
-
Mac OSX 10.6.7, Indesign CS5. This may be more of an Acrobat question, but here goes. I've got some huge PDF files containing musical scores, over 250 pages, that I want to place into Indesign. These were generated by a Windows program (Sibelius, if
-
Hi, I have an issue with my new Blackberry z10. I'm trying to activate my z10 with only the wifi network without a sim card, but when I'm connected to the network the phone is locked to "update" without loading bar. I cannot do anything now. When i r
-
I can't export to HD in Premiere Pro CC despite using HD source video and large format photos
I am trying to create a video slide show in PP CC using various sizes of photos and some HD source video footage and when I export the finished product the titles are murky, the photos are pixelated, and it looks HORRIBLE in general. I know in previo
-
MWI on mobile phones (CUC 8.5)
Hey. Anyone played with getting MWI information from the Unity connection (8.5) to a mobile phone I have it running on a unity 4.x on the windows platform, but i can se any documentation on the informix on the CUC Can anyone help?? Best regards Thoma