May Day! MIDP DTMF help needed !!
hi all,
am trying to make a call to another mobile device by using platformRequest() method. am successful with this. but, once I get connected I need to send DTMF codes. pl help how to do this. am confused which method to use, etc.
thanks in advance
Su37
hi,
am using a Menu driven application. using tis menu, I can make the call. once the call has connected I need to send 4 digit DTMF by using another menu item in the same menu. Is this not possible?
thanks in advance
Su37
Similar Messages
-
Dear apple management, apple support communities
I have purchased I pad mini e few days ago. I need help as follows:
(1) Camera: i did take a few photos but something has gone wrong. As i press the camera icon, I get a blank dark black screen. What do you think has gone wrong ? HELP URGENTLY REQUIRED.
(2) How do i sync my pc with I pad mini?
(3)i can read on i pad mini file made in microsoft excel but all numbers are very different from the original document. What is the solutuon?
Dr Uma S Nayak
<Personal Information Edited by Host>You are talking to fellow users on these forums, not iTunes Support or Apple - I've asked the hosts to remove your phone number from your post.
For the Camera app, try closing it via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar at the bottom of the iPad's screen, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't fix it then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
In terms of syncing, you will need iTunes on your computer - if you haven't already downloaded it then you can do so from here : http://www.apple.com/itunes/download/
You can conncet the iPad to your computer and select it on the left-hand sidebar of your computer's iTunes (you can enable the sidebar on iTunes 11 on a PC via control-S), and use the tabs on the right-hand side of the iTunes screen to sycn your content to the iPad.
Syncing music : http://support.apple.com/kb/HT1351
Syncing apps : http://support.apple.com/kb/PH12315
If you haven't yet synced your iPad to your computer you may also find this page useful : https://discussions.apple.com/docs/DOC-3141
For the excel file, what app are you viewing/editing it in ? If the values are different then it may be that the app that you are using doesn't support all the formulas that are being used in the spreadsheet. Apps that 'support' excel documents include Apple's Numbers app, and from third-parties apps such as Documents To Go ('premium' version) and QuickOffice Pro HD. -
HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help.
I bought it in South Africa and I am currently in Israel.thank you for the response.its not working, tried that. i can switch the machine on and off, can hear the machine when i hold it to my ear. but nothing works, not the screen, not the sound, nothing.
-
Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help needed !
Hello:
I would trot back into the Apple store and have them fix the problem (or call Applecare with a warranty issue). There is no sense in you wasting your time trying to troubleshoot things on a new computer.
Barry -
Ok so my problem is I put $100 on my account an it not letting me buy in app purchases an I'm ticked off to the max an idk how to fix this I bough in app the other day perfectly fine I need help bad HELP me
You need to Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Good Day
Can anyone help me get icloud customer service help email address? I need to contact them to help me reset my password.
I cant use my iPhone since upgrading to Ios7
Thank you in advance
Moagi.(RSA)
<E-mail Edited by Host>It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. No-one is goingto email you.
Go to http://iforgot.apple.com and sign in with your iCloud login. A new password will be sent to your associated email address. If this doesn't work you will have to contact Support. Go to https://getsupport.apple.com; click' See all products and services', then 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password'. -
hi just noticed that 3g has gone from my i phone 6 plus i know it was working the other day , what do i need to do , spoke to 02 10 mins ago told me to call apple help
Try looking at this site. https://downdetector.co.uk/problems/o2
Looks like there are a few problems -
URGENT HELP NEEDED (Bios Settings Failed)
Hey Guys,
I am having problems with my MSI Board, and don't know what to do. I am very much a noob to BIOS/and modding so I apologize in advance. You guys helped me a few months ago getting everything up and running and all was great for months. Then last night I walked away from my PC for a while and when i came back a starting screen was on saying my OC Settings Failed to load, i tried other versions I saved and they all failed as well. I ended up loading failsafe options, and got the "double start" where the computer turns on, then instantly shuts off, then turns on again. This allowed me to load windows 7, which then started to "install updates". So i think while i was away Windows automatically updated and rebooted... but would that effect my BIOS settings?
As I said, I had my system running perfect for months no errors or crashes at all based on the Bios setting you guys help me with in this thread: https://forum-en.msi.com/index.php?topic=147854.0
However, last week I removed the heat sink and installed this cooler: http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Water+Cooling-_-Corsair-_-35181010
All I did was unhook everything from the MB, install the cooler, and then hook everything back up to the MB. The only thing I may have done wrong is not connect the SATA devices (my HDs and ROMS) back in the spots they were in originally. However after I installed the cooler, they system booted right up, and I haven’t had any problems with my system for the past two weeks. I also should note I didnt make any BIOS changes either after I installed the cooler. So I don’t know if I should have done something there. Yet, like I said the system has been fine for the past two weeks, no crashes or errors... it wasn’t until last night after Windows auto updated that this has begun.
The reason I need "URGENT HELP" is because of course I just a new job with deadlines due and so much video editing work I need to do. I would be fine leaving it on failsafe settings, and forgetting the OC setting all together if I new that would make the system stable. But considering its still doing the "double start" even in failsafe mode, im afraid if i start working my system will crash.
So I am begging anybody for any advice or help they could provide. I will provide my system info below. If anybody can guide me as to what settings I should set in BIOS i would appreciate it. Or perhaps there’s a BIOS update that I should use now that I have a cooler and not a heat sink? If you need any more information from me, just ask. I will be monitoring this thread all day, as I desperately need help.
MY SYSTEM:
Intel 980X chip running Win 7 64bit (with MSI BigBang xPower MB installed in my old Dell XPS 730X)
(1) SATA II WD 3gb Hard Drive @ 1.5TB
(2) OCZ SATA II SSD drives @120GB: http://www.newegg.com/Product/Product.aspx?Item=N82E16820227543
(2) Hitachi 6gb SATA III drives @2TB: http://www.newegg.com/Product/Product.aspx?Item=N82E16822145473
3 DVD/CD/BLUERAY DRIVES:
1 SATA DVD DRIVE
1 SATA BlueRay Drive
1 SATA CD Drive
(So 8 SATA Devices Total)
24GIGs of this ram: http://www.newegg.com/Product/Product.aspx?Item=N82E16820145321
1 NVida Geforce GTX 470
1 Soundblaster X-Fi Titanum Card
New Addition Water Cooler: http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Water+Cooling-_-Corsair-_-35181010PROBLEM: My OC BIOS setting wont load. Even on failsafe i get the "double start". I want to get back to my OC (stable) settings.
UPDATE: Since I posted somebody messaged me mentioned I should have "reset the CMOS" after I installed the new cooler. So I did that, and now they system starts fine without the "double start". I am able to load one of my saved OC settings now as well (but any others causes a failure).
NEW QUESTIONS:
1. Since I reset the CMOS and now the system is starting fine on my last OC settings, is it safe to assume the sytem is stable for now?
2. I never made any power changes or BIOS changes after I installed the new cooler. Should I have?
3. After I reset the CMOS was I soupposed to reinstall the drivers from the MSI disk again? I did not, and the system seems to be fine, but I thought I was soupposed to do that after a CMOS reset.
4. Is there a new BIOS version for my setup that may be better now? Im currently on v1.5
Here is a screenshot from CPUZ of the system information currently. This is with it booting normally after my CMOS reboot. I just figured id post it incase it helps with any of my questions. Thanks so much for helping guys! -
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help............... -
? symbol in Keynote - Help Needed please !!!!
Hi,
New to Mac and even newer to keynote.....
when i open a new slide there are ? symbols on the slide which appear also when i play the slides....
is this an error or not ?
If its an error what does it mean and if not how do i remove them ?????
Please help as my daughters homework needs doing (by her obviously, not me)
Thanks
NickHere are a few things you can do to troubleshoot the problem:
- Have you tried re-recording the entire song playlist? This would be the first thing to try.
- If it still skips, does it play OK in the Editing mode (not in Presentation mode)? If so, there may be a problem with the way you Recorded the Soundtrack.
- Try recording just "Beautiful Day" as a Soundtrack and see if it still skips. If so, then this track itself may have some "glitches" and need to be replaced with a new copy.
- What is the processor speed of your playback computer? With some presentations the audio will skip on slower machines, but not faster ones. (e.g. Some audio tracks will skip on my G5 desktop but not on my MacBook Pro.)
Good luck -
New Nokia E7 just bought in Italy * help needed to...
I just bought a new E7
Very nice and light but I let my old E90 and I need some help to solve some problems
How can I
*If I want to check mail manually there is nowhere a function or option or button "check mail" !!
*In my address book of E90 I could add some details on the descriptions. I can't there ! If for an example I wanted to make difference etween more mobiles number on a name I could put on E90 mobile perso or mobile night or mobile urgency
There I can't add any detail on the voices on the phone !
And when I transferred from E90 all those details are now lost and I have the name with 5 mobiles numbers without any tag or note !
*Other very big problem, when you send mails (not sms) there is no folder "sent mails" anywhere !!! You can't keep you sent mails !!!
in italian
* Nei vari indirizzi mail come faccio a fare il controllo mail manualmente ? Non esiste nelle opzioni o da nessuna parte il tasto check mail o similare
* Nella rubrica a differenza sempre del mio ultimo E90 se voglio mettere un dettaglio su le varie voci non posso. Per esempio Mario Rossi ha tre numeri cellulari dove prima mettevo numero celliulare giorno, numero urgenze o numero riservato e adesso non posso. Oltre ad avermi nel trasferimento dei dati dall e90 a e7 perso tutti i "dettagli" della rubrica qui sopra spiegati. Mi ha trasferito i numeri ma senza i dettagli che avevo aggiunto
* Importante per le mails quando invio una email NON appare da nessuna parte una cartella o folder SENT MAILS. Assurdo ma non c e una cartella mails inviate ! appare sms inviati ma da NESSUNA parte mails inviate !!!no news from Nokia...
Re: New Nokia E7 just bought in Italy * help needed to solve problems
03-May-2011 05:15 PM
Please help answering few functions missing !!
1 Any news from Nokia for the SENT MAIL patch release ???
Still got empty sent mails and even NO possibility to make automatically a copy in personal mail of what we send !
2 Other patch ALARM SETTINGS CANT PUT AN alarm for tomorrow for example and can t suspend a daily weekly alarm but can oly cancel and after need to reinsert it
3 Other info, is it possible to PROGRAM text messages SMS. I f you want to write NOW an SMS text mesage and program to be sent automatically at example three hours later or an hour the day after or what else is it possible ??
4 When you send a mail what is the function FOLLOW UP or ACTIVATE FOLLOW UP ???
5 any news to modify tags in address book with peronal tags ? -
Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports. -
HELP NEEDED! I have been working for 3 days in a "new doc". Of course i have saved several times (control+s)
but i do not remember it asking me about file name or folder. Today my comp crashed and i do not find the file. Just found 2 files (a tmp and one with no extension)
: one with 174 mg and another one with almost 2 gb. Is there any possibility to recover my work? Photoshop did not oppened a thing when i restarted comp
Thanks in advanceThe TMP file is your Scratch Disk file, and cannot be "recovered" to an Image file.
Your second file might be almost anything. Though designed more for video files, both G-Spot and MediaInfo (both free file info utilities), CAN read several Still Image file types, and might help point out what that file (the one with no extension) really is. OTOH, as it could be almost anything, it could be that there is no header info in the file, for either to read.
Good luck,
Hunt
PS - Before I did much additional work, I would investigate WHY your computer shut down. If you are on a PC, I would go into Event Viewer, at the time of the shutdown, and see if you can track down any warning, or error messages, in both the System and Applications Tabs. I am pretty sure that a Mac has similar, but have not a clue where, or even what it would be called. -
Help needed in PS module on CJ9ECP/CJ20N for revaluating CCR??
help needed in PS module on CJ9ECP/CJ20N for revaluating CCR??
How to handle method on_costing_component_to_outtab which belongs to badi gui_itemization_ck. This is to revaluate CCR in CJ20N.
From sale transaction(va01/va02) i need to call cj20n/cj9ecp for revaluating cost estimates. Can anyone say how to proceed with this thing.
Can any one say how to handle pop up window in CJ20N/CJ9ECP when clicked edit ecp button. Later how to revaluate cost estimates. For this should i need to go for call transaction or is there any method available. If so how to handle method for revaluating cost estimates for ECP of WBS elementsThanks Amol for the advice.
My friend doesn't belong to an engineering background and had not worked in a manufacturing environment.
He holds an MBA degree specialised in systems and has worked in software companies supporting software projects and the functions(like HR,Procurement in the same setup) as a software quality guy.
Moreover the modules mentioned by you requires engineering background with manufacturing exposure.
He had enquired for the course at siemens and they said that he may not be suitable for any of the modules offered by them as per the above reasons.They also mentioned that they have to check with SAP Labs for expert opinion.
Please provide your inputs.
regards,
Zubair. -
Urgent help needed on oracle queueing
Hi
we have created AQ tables and queues but are facing with the following errors
Thu Aug 30 17:25:31 2007
Errors in file e:\orant\ora9i\pds\udump\pds_ora_4092.trc:
ORA-00600: internal error code, arguments: [opidor: call 1], [], [], [], [], [], [], []
Thu Aug 30 17:44:17 2007
Errors in file e:\orant\ora9i\pds\udump\pds_ora_4092.trc:
ORA-00600: internal error code, arguments: [17281], [1001], [0x25EBB628], [], [], [], [], []
ORA-01001: invalid cursor
Thu Aug 30 17:44:17 2007
Errors in file e:\orant\ora9i\pds\udump\pds_ora_4092.trc:
ORA-00600: internal error code, arguments: [17281], [1001], [0x25EBB628], [], [], [], [], []
ORA-01001: invalid cursor
ORA-00600: internal error code, arguments: [17281], [1001], [0x25EBB628], [], [], [], [], []
ORA-01001: invalid cursor
help needed asap
thanxORA-600 should be reported to Oracle support with trace files and alertlog.
Well the following note may help you:
Note: 433389.1
Hope this Helps
Regards
Maybe you are looking for
-
I have a PDF form with submit by URL button. When used 'select email client' box pops up. If by desktop email, button works fine. If by internet email you have to save the pdf. But my PDF will not save to my computer when testing the form. It a
-
Can i take the update off my phone ?
is there any way to un-upgrade an iphone?
-
Why can't I adjust the size/proportions of objects anymore?
This problem has been happening intermittently today. The resizing squares around all of my objects have disappeared and I can no longer adjust their size or dimensions. I have tried resetting my tools as well as deactivating and reactivating my acco
-
OracleORA8ITNSListener start but no oracle start
hi master , still i have sql plus starting error oracle no available thaking you master fahim
-
Does anyone have any suggestions for a good workflow between Aperture and Camera Raw (photoshop CS5)?. I would like to edit in Camera Raw, but store my photos in Aperture. My images are referenced images stored on an external hard drive. Thank you!