MB1A details in Pi sheet
Hi All,
I want the component list that got posted through MB1A transaction in PI sheet.How can we do this.
(I will do batch determination in process order for components and while doing MB1A i may make some changes.I want the system to pick up this changed list in PI sheet)
Any suggestions?
regards
Jeevan
closed
Similar Messages
-
Standard SAP reports for detailed Service Entry Sheet data
Hi All,
I am searching for standard SAP reports to extract the detailed Service Entry Sheet data out of SAP. For example, I need the deailed information like Service Entry Sheet Number, Purchase Order Number, PO line item number, short text, Posting Date, External Number, Service number, Quantity, Gross Price, Cost Object (Order or Network or WBS), Personal Number (if applicable), workday. I couldn't find any standard report. So if anyone know it, please help me.
Thanks,
TingHi,
In ME2S also you can get good report by execution and by clicking SO/ PO number.( where cost object can be viewed)
If you are very much specific, go for development
Regards,
Biju K -
Making a "details" view contact sheet
I'm trying to make a contact sheet PDF, but have the images displayed in the "details" mode. Is there a way to do this?
I'd like to have it look like this... (even better would be a block of ruled lines in the blank space for handwritten notes)
http://i175.photobucket.com/albums/w134/navstar/bridge-details-Picture-7.gifHi Navarro,
As you can see, your thread has been viewed over thirty times. It seems that no one knows the answer.
My feeling is that, if it's possible at all, it would have to be done through scripting. Tried the Bridge Scripting forum yet? -
Load details into a Sheet to run in subquery
Hi guys
Is there a way to get a list of values i.e. references from a column in excel into a Disco sheet to run them as a subquery on a 2nd sheet?
I have stacks of references and need to do a select for the values in that custom table.
Thank
JohanHi,
Your best option is to save the Excel sheet as a csv file and map the file into the database as an external table. You will need to have a shared drive between the desktop and the server (a samba drive is OK) and some DBA input to set up the external table and database directory.
One set up it works well since you can change and save the excel sheet and then just refresh the Discoverer worksheet to see the new content.
Rod West -
Service entry sheet create for contracts with unplanned services
Hi,
I am creating SES using BAPI_ENTRYSHEET_CREATE. I have a scenario in which i need to create SES based on the PO no, PO Item , Quantity, Headertext, Contract No, Contract Item, Contract_Item_Line. While creating manual SES using ML81N we use Contract button to provide contract no, item and service(service with master, without master). When i am creating SES it is creating SES but the service is getting posted as unplanned not contract checkbox. In ML81N screen there are four checkboxes for any service line. 1)Plannes 2) Unplanned 3)Contract 4) Dele. Indicator
In my case it should flag the contract button but when there is an unplanned service for any contract no, it is flagging the Unplanned checkbox not contract checkbox.
Please suggest
Thanks
Randhiryou can get the PackNo details of entry sheet from ESSR and of PO from EKPO. from the packno find the subpack no in ESLL. put the subpack no again in ESLL as pack number and you get the services for entry sheet and PO. you may try a logic to link both
-
Service Entry Sheet SES Reporting - Additional Planned & Unplanned Services
Hey Experts,
We have activated the ability for users to add additional planned and unplanned services during service entry sheet processing. I am looking for a way to run a report which displays the amount or quantity of additional planned services (services which exceed the amount planned in the purchase order) and unplanned services which have been entered against the purchase order.
Your thoughts would be helpful!!
Leo.you can get the PackNo details of entry sheet from ESSR and of PO from EKPO. from the packno find the subpack no in ESLL. put the subpack no again in ESLL as pack number and you get the services for entry sheet and PO. you may try a logic to link both
-
Hi all,
I have a flat file which consists of vendor details (vendor no. address details) and Invoice details (like invoice no., pymt trm, due date, tax id, g/l acc.no. etc). I want to upload these details from spread sheet to SAP could u please help me to do this.
what is the way to upload either BDC or BAPI
if the t.code is FB60 or F-43 how i am going to upload can u please help me with proper code.
u r help will be very important and it will be awarded.
thanks.
naveen.Hi,
In FB60 there is no chance to upload vendor address details and one more thing is i want upload g/l acc. details also for this i may have to use BDC table control i think.
So i have to upload vendor address details seperatly or is there any chance to upload along with the invoice details (i.e. BAPI name).
if i have to use BDC could please help me in using the table control for this t.code.
give me any sample program on BDC table control.
thanks.
Naveen -
XML BI Publisher Output in 2 sheets Excel
Hi ,
I want XML BI Publisher output in 2 sheets Excel. first sheet contains Report details and next sheet contains Report output. Could we please help me in this?. I am using BI Publisher 11.1.1.0 and Oracle apps is R12.1.
Thanks>
I am using Oracle Apps 11i.
>
for apps questions plz use Category: E-Business Suite - https://forums.oracle.com/forums/category.jspa?categoryID=3
>
I have to create one report in Oracle Apps in which the report output should be in Excel Format and in that excel 2 sheet should be generated.
One sheet is having data from one module and one sheet is having a data from other module.
>
look at 830960's link
also use Forum: BI Publisher - BI Publisher
>
Please suggest me how can i write a code like this and how can i create a concurrent?
>
- create your report and use it as data source for result report (excel)
- create excel template(for r12) or ,for example, xsl tempalte for 11i
- create concurrent and executable, for concurrent program set output as xml
>
What should be the value of output format in the concurrent program ?
>
xml
as another approach - convert your rdf report to xml publisher report -
I am trying to create a report with deill to detail functionality. I have got main report showing payments of customer and i want user to click on the account number field to open the details about the account. I have got 2 reports already defined. Now from the first report i am trying to create Drill to Detail in another Sheet. I dont see other report folder in the 'Where do you want to drill to?" Option. Please help me what i need to do to make the account detail report visible under the Drill to detail option.
ThanksUse a common key between this two folders to define a drill to detail item class in discoverer administrator. The second sheet will apear in the drill to detail dialog box.
Thanks. -
How to download data to Excel sheet
Hi ,
I want to modify a standard program CRM_MKTBP_ATTR_HISTORY in CRM,
which is displaying business partner details with attribute value old attribute value and changed by, so they want to display all the details in excel sheet then they excutive this prog it shuld ne downloaded to excel sheet.
here prog is in object oriented abap i am not able to trace final interal table.
but in class CL_GUI_ALV_GRID there is a method called EXPORT_TO_SPREAD_SHEET.
can any body help me in this.
thanks in advance .
sreedhar.please check this code and links given below
DATA: BEGIN OF itab1 OCCURS 0,
f1(10),
END OF itab1.
itab1-f1 = 'Field 1'.
APPEND itab1.
itab1-f1 = 'Field 2'.
APPEND itab1.
itab1-f1 = 'Field 3'.
APPEND itab1.
itab1-f1 = 'Field 4'.
APPEND itab1.
itab1-f1 = 'Field 5'.
APPEND itab1.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:test.xls'
filetype = 'ASC'
write_field_separator = 'X'
TABLES
data_tab = itab
fieldnames = itab1
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
check these links also
http://www.sapdevelopment.co.uk/file/file_uploadpc.htm
http://www.sapdevelopment.co.uk/file/file_updown.htm
http://www.sapdevelopment.co.uk/file/file_downloadpc.htm -
Any BAPIs to post Service entery details
Hi SAP Gurus,
I need to create an interface program to upload Service entry details received from the different system to sap.
Details:
Service Entry Sheet will be posted manually for the accepted services in case of Maintenance, Repair and Licensing. A batch job will be created to post the Service Entry Sheet from the file extracted out of the EPM system, based on the number of actual hours worked by each Contractor on a Project.
Kindly inform whether any BAPI is available to post this data or I need to go for BDC method only.
Regards
Harihi,
chk out these BAPI's
BAPI_SERVICENOTIFICAT_GETLIST Select service notifications according to customer or contact person
BAPI_SERVICENOTIFICAT_CREATE Create service notification
BAPI_SERVNOT_ADD_DATA Added Items, Causes, Activities, Tasks, Partners of the service notif.
BAPI_SERVNOT_CHANGEUSRSTAT Change the user status of a service notification
BAPI_SERVNOT_CLOSE Complete service notification
BAPI_SERVNOT_CREATE Create service notification
BAPI_SERVNOT_DEL_DATA Delete Items, Causes, Activities, Tasks, Partners of the service notif.
BAPI_SERVNOT_GET_DETAIL Get details about a service notification
BAPI_SERVNOT_MODIFY_DATA Modify a service notification or associated subdata
BAPI_SERVNOT_POSTPONE Postpone service notification
BAPI_SERVNOT_PUTINPROGRESS Put in process a service notification
BAPI_PROC_CHAR_GET_HELPVALUES Read allowed values for a process characteristic
BAPI_PROC_CHAR_GET_LIST Read process characteristics, incl. detail data
BASB Service Master Record: BAPIs
BAPI_SERVICE_GET_DETAIL Read Detailed Data for a Service Master Record
BAPI_SERVICE_GET_LIST List Display for Service Master Records
BAPI_SERVICE_GET_DETAIL Read Detailed Data for a Service Master Record
BAPI_SERVICENOTIFICAT_CREATE Create service notification
BAPI_SERVICENOTIFICAT_GETLIST Select service notifications according to customer or contact person
Regards,
Arunsri -
Report for List of Transfer orders in warehouse management
hi,
i want generate a report for list of transfer order orders in warehouse management
is there any report with you guys kindly help me,
or any standard report is there to display list of transfer orders in warehouse management
Thanks,
Rajesh
Edited by: rajesh kumar kandagatla on Feb 11, 2009 9:27 PMHi,
If it is one time requirement, you can run the report LT23 and download the data to excel sheet and donwload material details in another sheet and you can match the temperature column in excel file.
If it is permanent requirement, create a query and attach transaction code to that or write a seperate report for this requirement.
Please let me know.
Thanks
Nagarajan -
How to use QAAWS with a prompt to show ALL values
I have to build a dashboard which has two prompts in it
One for Customer and the other one is Project
Customer prompt should let user to select a customer from the list to display dashboard with the selected customer.Also it should allow user to select ALL from the prompt values to display all customers
There is a object defined in the universe for 'ALL' to use in Web Intelligence report. But for dashboard I don't want to use LiveOffice as it is having many issues when refreshing
I am thinking to use QAAWS as my dashboard is not that complex. It shows all details in spread sheets
How to work in this situation with QAAWS..does not it need to create new objects in the universe or modify exisiting 'ALL' object lovs
Please let me know the easiest way to achieve thisHi,
I think you can achieve in two ways ...
1. In the QaWS, you've Prompt Parameters next to the prompt, choose "Optional Prompt"; When user runs the report if they kept the selection blank, report runs for ALL
2. In the QaWS, in the Prompt choos "Matches Pattern", and in the Xcelsius dashboard pass "%%" to the selection, and in the selection list for the customer dropdown include one additional cell containing ALL text;
Hope it helps,
Saradhi -
Error in running DME - No advice number
Hi,
Seeking experts help as I ran into some issues in DME. got to do a immediate fix.
When I ran DME (RFFOUC_T ) for the Pymt method P ( Bnk Trasfers).
First I got a popup to provide printer details - DME accompanying sheet - Bnk ID
When I insert output device - LOCL and hit print, I get a message that maintain output device in user master record"
Can you plz suggest were do we need to maintain default output device details"?
After I put the printer details once again and hit printer,
I got a output but error at "LISTFS" dataset that in the form XXXX / window main , the element 610-p is missing and relavant form is defective.
Main issue is that I wanted to to know if this program has generated any advice number. If it has, where can i check the advice #. I knew PAYR table but i get only check numbers.
Appreciate your help
peddiYou need to do this in T-code "FBZP" .
This might also help .
ACH file for Garnishment vendor (Child Support)
^ Saquib -
TABLE LINK SHIPMENT DOCUMENT TO VENDOR PAYMENT
Hi,
Our process is we are creating shipment document and cost then backgroung we are creating
service sheet entry and purchase. Against service sheet entry we parking transport vendor bill
and againsr park document payment is given to vendor against the MIRO t code.
I need help of entire table link to develop report shipment document to vendor payment document no and
details againt service sheet entry.
Thanks in advance
Regards
TarunkumarYou can get link by joinning below tables.Hope these tables will elp to get data.
VTTK shipment number.
VFKP shipment costing item data
CESSR service entry sheet details
EKBE PO history
RBCO & RBKP invoice item and header tables.
From cessr you will get shipment cost document and service entry sheet details and you will get from EKBE PO ,service entry sheet and invoice details.
Maybe you are looking for
-
Edge audio doesn't work in DPS project
Being very happy after latest update of Edge CC, I've decided to make DPS project for iPad. First, when I chose "autoplay" button for audio timeline, I got a warning about sound autoplay option is not supported at digital devices (??). So what should
-
Hi, i'm trying to use annotation in my code, but the compiler show following error message: (try -source 1.5 to enable annotations) my jdk defaullt is jdk 1.5 help.
-
New iMac: do I really want to use time machine backup from macbook (which I will continue to use but has a lot of stuff on it I don't particularly want to move to the imac)?? Or is it better to move things manually and reload applications?
-
Some type doesn't appear during preview
I can see the type animation when I press enter on the keyboard for the timeline to play but when previewing it, some of it doesn't appear for some reason. Also I am using Macromedia Flash 8, Windows Xp, and wondering if it the file will be compatibl
-
Wha' Happen? I Can't Do My Wurk!!!
Sorry for the Mighty Wind reference..<G> But I was arranging some files in the HD window, you know where the side bar lists; Desktop,Users,Applications, Documents, Pictures and used to list MUSIC! I say used to as I accidently slid it out the window