MCB2300 Run Debug Failed

Can you tell me what the following error message means
uVision status : Run/Debug failed
Detail: [UVSC_DBG_START_EXECUTION, MSG: 0x2002, STATUS: 0xB] (11)
Thanks,
Richard

"Operation not possible when target is executing"
However, the code may be returned in response to many UVSOCK messages.
Perhaps you got the mesage when you tryed to debug an application while another was already in progress, but LabVIEW sends messages in proper order (e.g. stop debug, exit debug, enter debug, etc.).
I am wandering what version are you using?

Similar Messages

Error: Acquire running lock failed: 256 with HA after upgr. to 2.1.5

Hello,
after upgrading the 2 servers in server pool from 2.1.2 to 2.1.5 using yum, all vms throw:
Error: Acquire running lock failed: 256
when trying to start them. HA-infrastructure-check works well from OVMM 2.1.2 (not upgraded yet) and if we disable HA for the server pool, the vms come up. Shared storage is on NFS
We have the following in /var/log/xen/xend.log:
[2009-06-26 14:52:21 2649] DEBUG (XendDomainInfo:87) XendDomainInfo.create(['vm', ['name', '470_vm215'], ['memory', '1024'], ['on_reboot', 'restart'], ['on_crash', 'restart'], ['vcpus', 1], ['on_xend_start', 'ignore'], ['on_xend_stop', 'ignore'], ['uuid', '14205f6a-12cc-42da-a32e-06f30b6288d4'], ['bootloader', '/usr/bin/pygrub'], ['bootloader_args', '-q'], ['image', ['linux']], ['device', ['vbd', ['uname', 'file:/OVS/running_pool/470_vm215/system.img'], ['dev', 'sda'], ['mode', 'w']]], ['device', ['vif', ['bridge', 'xenbr0'], ['mac', '00:16:3E:32:CD:FC'], ['type', 'netfront']]], ['device', ['vkbd']], ['device', ['vfb', ['vncunused', '1'], ['vncpasswd', 'XXXXXXXX'], ['vnclisten', '0.0.0.0'], ['type', 'vnc'], ['display', 'localhost:11.0'], ['xauthority', '/root/.Xauthority']]]])
[2009-06-26 14:52:21 2649] ERROR (XendDomainInfo:452) VM start failed
Traceback (most recent call last):
File "/usr/lib/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 430, in start
self.acquire_running_lock();
File "/usr/lib/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 2891, in acquire_running_lock
raise XendError('Acquire running lock failed: %s' % status)
XendError: Acquire running lock failed: 256
[2009-06-26 14:52:21 2649] DEBUG (XendDomainInfo:1881) XendDomainInfo.destroy: domid=None
[2009-06-26 14:52:21 2649] ERROR (XendDomainInfo:92) Domain construction failed
Traceback (most recent call last):
File "/usr/lib/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 90, in create
vm.start()
File "/usr/lib/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 430, in start
self.acquire_running_lock();
File "/usr/lib/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 2891, in acquire_running_lock
raise XendError('Acquire running lock failed: %s' % status)
XendError: Acquire running lock failed: 256
[2009-06-26 14:52:21 2649] DEBUG (XendDomainInfo:1881) XendDomainInfo.destroy: domid=None
and in /var/log/xen/xend-debug.log:
ha_set_dlm_lock ['14205f6a-12cc-42da-a32e-06f30b6288d4', '470_vm215'] =>
failed: <Exception: create lock('/dlm/ovm/4205f6a12cc42daa32e06f30b6288d4') failed. <OSError: [Errno 26] Text file busy: '/dlm/ovm/4205f6a12cc42daa32e06f30b6288d4'>
StackTrace:
File "/opt/ovs-agent-2.2/OVSXHA.py", line 371, in ha_set_dlm_lock
fd = os.open(lock_path, os.O_CREAT | os.O_NONBLOCK)
>
StackTrace:
File "/opt/ovs-agent-2.2/OVSXHA.py", line 379, in ha_set_dlm_lock
raise Exception("create lock('%s') failed. %s" % (lock_path, errmsg))
Any ideas?
Thanks, Olaf

suk wrote:
1. To delete the database, which database are you referring to? I'm referring to the ovs-agent database:
1. Stop the agent: # /etc/init.d/ovs-agent stop 2. Delete the database: # rm -f /etc/ovs-agent/db 3. Start the agent: # /etc/init.d/ovs-agent start If you have Oracle VM Manager v2.1.5 (which you should have upgraded before your servers, btw), you can now try using the "Restore" option for the server pool. Click on the Server Pool in the manager and hit "Restore" -- this will send the configuration data back down to the agents in the pool. Alternatively, you may need to de-register the servers in your pool and re-register them.
2. To re-imported the guests, how?In Oracle VM Manager -- if you recreate the pool, you have the option of "Importing" both VM Templates and VM Guests. Deleting the pool in the Manager does not delete your guests as long as you ensure that you DO NOT select "Remove Working Directories".

EA2: bug in package run/debug dialog

The PL/SQL block is not (re)generated correctly when switching between implementations of an overloaded func/proc:
Whenever you run/debug a package from sql developer a dialog box is opened in which you can select a TARGET (any of the public function/procedures for the package).
A pl/sql block to execute the the selected TARGET is then dynamically generated.
If you have an overload procedure it is presented as
FUNC1(1)
FUNC1(2)
FUNC2
FUNC3
If you switch between 2 overloads, the parameters to the left actually changes correctly. So it does notice the change
However the PL/SQL below is unchanged. The variables are still valid for FUNC(1) instead of FUNC(2)
Edited by: apodictus on Dec 11, 2010 10:08 PM

I already noticed the bug is probably a bit more delicate then originally stated.
I extended the original overload procedure for which I found the bug with a few more formal parameters.
To my surprise after that alteration, the PL/SQL block was suddenly generated correctly.
Might have been an initial invocation then...

Carriage returns causes enclosed VBScript to run and fail to complete

I am finding a weird problem.
I have my autosequence file working perfectly without any errors but the same VBscript file when enclosed runs and fails to complete I am unable to figure what is wrong.
I am using �vbCRLF� to read/write from INI files into the script files. Other than this I dont use any cariage returns. When Iopen my Script files in other editors like Notepad etc, I am able to find a small square kind of a character. Is there some unseen Carriage Returns (CRs) or Line Feeds (LFs) or some combination due to which I am facing this.
(I am using DIAdem 9)
Can anyone please help me out with this immediately.
Thanks in advance,
Wating for your quick response.

Hello, I'm searching through the Diadem Forum and I didn't find something that I could use.
I have to exchange text information between to programs (DIAdem and CatmanProfessional).
My initial idea is to create INI file to acomplish this. Catman has a function to read or write quite easily describing the SECTIONS and KEYS of this INI file.
However I can't see something on Diadem Script. It onlys read or write Text files... And then I must extract the key values cutting and finding one by one.
I saw that Labview has an open VI to treat this, is there nothing similar for DIAdem?

Flash Builder 4 - Run/Debug toolbar disabled

Hello
I have worked on my FLEX project for several weeks now. I have the need to have a Team Share now, as other developers will collaborate on this FLEX project.
I setup SVN and was able to check in changes and verify the changes on the SVN server. That works well.
I noticed now that I cannot run or debug the project at all. The run/debug toolbar buttons are disabled.
When I view the Run/Debug settings under Project Properties, it is empty.
What must I do to get my project back into debug, and the ability to even run it??? Help??

You're in the SVN Repository Exploring perspective, which looks a lot like the normal Flash perspective, but it isn't quite the same. Go to the Window menu and choose Perspective -> Flash.

SOA Suite Demo MIMEService - cannot be run/debug in this release.

Hi,
I'm getting the error message "MimeService.bpel cannot be run/debug in this release" after opening the example project in JDeveloper and selecting "Run".
Compilation works fine though:
Successful compilation: 0 errors, 0 warnings.
I installed the SOA Suite 10.1.3.1 and also tried it after updating to 10.1.3.3.
For JDeveloper I have tried v10.1.3.1 and v10.1.3.2
Any suggestions?
Thanks
Fabian

You can not run a BPEL process in JDeveloper, you can only deploy it to the SOA server and test it from there.
Marc

Run - Debug project option is disabled to run the CVI RT application

Hi,
I am new to CVI Real time. I have taken the example code LoopTimingRT.prj and LoopTimingHost.prj from CVI samples directory. I am planning to run RT and host in the same desktop PC. I have created two seperate workspaces for RT and Host with their respective projects.For RT, target is given as local desktop computer, target type selected as dll, in target settings, Run time support is mentioned as Real Time Only.
In CVI Real Time Help and also in Getting Started with Labwindows/CVI Real Time pdf, it is mentioned like we have select Run -> Debug Project to run the RT application. When i am trying to do that, that option itself is disabled in RT workspace.
Please can anyone help me.
Thanks,
Haari

Hi,
As suggested by Raman you can go ahead with same step.
Regards,
SM

Run/debug settings not visible

I can't see the run/debug settings in flex 3. Sometimes, even
the buttons right next to the Launch Configurations are gone and in
various other places there are parts of the UI missing.
I also tried to install the flex plugin for eclipse, but the
same problem happens here. I tried to reinstall flex, upgrade to
3.01, but nothing seems to help.
I have the latest Java version. And the latest display
drivers (GeForce 8800 GTS)
*edit* I am running flex on vista

Ashu,
It is not only the JTA timeout which may cause transaction rollback. If JDBC and BPEL are involved then following timeouts also does matter and ideally all of them will be less than the JTA timeout -
1. XA connection timeout configured in data-source
2. Statement timeout configured in data-source
3. BPEL timeout - set property SyncMaxWaitTime (value in seconds) in the EM console
4. SOA EJB's timeout
Now question here should not be that which timeout is actually causing the transaction rollback, rather question should be that why a JDBC call is taking 300 seconds? What processing are you doing which is taking this much time?
Regards,
Anuj

Cannot be run/debug in this release?

Hi, I am following the installation instructions and built my first HelloWorld Composite service, but when I tried to run it, JDeveloper gave me the error message: cannot be run/debug in this release. Is this by design or is it I'm missing anything?
Thanks for any insights!

I reconfigured SOA with "Basic" option (it was "Configure All"), and it's working now

MessageDrivenHome::run: dequeue FAILED

Hi All,
Good Morning,
The Scenario is sth like that Servlet is Posting a message, Message Driven Bean receiving a Message over Oracle Application Server 10.1.1.2 where. Using OracleAs JMS provider. JNDI look up part is fine. may have I some insight on this error.
What ever message is sent by serrvlet is available with Queue but MBD is unavailable to receive the message. It seems OnMessage() is method is not fired. And getting the following message in lof file.
Auto-deploying JMSTest10MDB.jar... done.
JMSTes10Web: jsp: init
JMSTes10Web: Started
MessageDrivenHome::run: dequeue FAILED; attempting to re-acquire JMS session for blocking receiveMessageDrivenHome::run: retry_cnt=0 this.dequeue_retry_cnt=0 this.dequeue_retry_interval=60
MessageDrivenHome::run: dequeue FAILED; attempting to re-acquire JMS session for blocking receive
MessageDrivenHome::run: retry_cnt=0 this.dequeue_retry_cnt=0 this.dequeue_retry_interval=60
MessageDrivenHome::run: dequeue FAILED; attempting to re-acquire JMS session for blocking receive
MessageDrivenHome::run: retry_cnt=0 this.dequeue_retry_cnt=0 this.dequeue_retry_interval=60
MessageDrivenHome::run: dequeue FAILED; attempting to re-acquire JMS session for blocking receive
MessageDrivenHome::run: retry_cnt=0 this.dequeue_retry_cnt=0 this.dequeue_retry_interval=60
MessageDrivenHome::run: dequeue FAILED; attempting to re-acquire JMS session for blocking receive
MessageDrivenHome::run: retry_cnt=0 this.dequeue_retry_cnt=0 this.dequeue_retry_interval=60
05/06/13 13:52:13 Started
05/06/13 13:52:13 JMSTes10Web: Stopped
05/06/13 13:52:13 JMSTes10Web: jsp: init
05/06/13 13:52:13 JMSTes10Web: Started
05/06/13 13:52:54 JMSTes10Web: JMSTestServlet: init
05/06/13 13:52:54 JMSTes10Web: Stopped
Awaiting for prompt reply.
Thanks and Regards
Sunil Kumar Gupta

Are you using OC4J JMS or Oracle JMS (OJMS)? The difference is that the OC4J JMS is in-memory (not persistent by default), and uses a property file for configuration. OJMS 'hooks' into the Oracle Database Advanced Queueing (AQ). If you are using OJMS, the dequeueing error could be caused by a broken AQ on the database. I've seen this a couple of times after database upgrades, where the catpatch.sql was not run after the patch. Also, in both cases, check that you have used the correct way to do your JNDI lookup to get the providers.
Hope this helps,
Bastiaan

Running msiexec failed with return code 1619: While running SOFTWARE PROVISIONING MGR 1.0

Hello All SAP Basis Guys,
Running msiexec failed with return code 1619: getting this error
While running SOFTWARE PROVISIONING MGR 1.0 (for Windows Server on IA32 32bit ) for renaming (Domain name change) the SAP ECC 6.0 server on top of Windows Server 2003 x86 which is a 32 bit OS.
I am using the SAPCAR (for Windows Server on IA32 32bit ) to extract .SAR
can anyone please help me with this ?
List of attached for your reference.
1. Available versions of SPWM for windows in marketplace.
2. Window version details of KC1GSCSAP6 server (GS1 system).
3. Error screen while running SWPM
Thanks,
John

Issue has been resolved, its a bug in SWPM tool.
Problem:
SAPCAR is extrating the "sapmmcx86u.msi" under the folder DBINDEP.
But while running the tool, system is trying to open "sapmmcx86u.msi" from the path "common\install" folder.
Solution:
After you received the error, copy path "sapmmcx86u.msi" to "common\install" folder and you will be good.

Click-2-run configuration failed

I was downloading an Adobe Flash Player update and it downloaded a bunch of other junk (something like Optimizer Pro Plus). Now my Microsoft Office programs won't open. I get a "click-2-run configuration failed" message.

Maurine1 wrote:
I was downloading an Adobe Flash Player update and it downloaded a bunch of other junk (something like Optimizer Pro Plus). Now my Microsoft Office programs won't open. I get a "click-2-run configuration failed" message.
Whatever you downloaded wasn't Flash Player, and it DIDN'T come from Adobe.
The ONLY things that are EVER bundled with any freeware downloads from Adobe are:
McAfee Security Scan
Norton Security Scan
Google Chrome & Toolbar
Lightroom 5 (Mac only)
You were tricked into downloading an illegal fake with malware. You need to uninstall whatever it was that you downloaded and run a thorough system scan to remove the other junk it put on.

Error: Acquire running lock failed: 256

Can anyone help me? I did everthing that documentation says,but can't start my Virtual Machine .The error below picks up
Error: Acquire running lock failed: 256

VM server and VM manager both on virtual box
Oracle VM 3.1.1

Run Debug not working?

I am super new to Flex. When I try to debug my class, I get the following error, which I don't know what to do with and it opens the swf file in Flash CS4. Is there a Flex debugger that I need to download? I am running Flex Builder 3.
Failed to connect; session timed out.
Ensure that:
1. You compiled your Flash application with debugging on.
2. You are running the debugger version of Flash Player.
Thanks a lot for any help!!!

Are you running a debugger version of Flash Player? (Right click on any Flash content--you should see "Debugger" in the context menu). If not, download a debug version from Adobe. If so, some people have had problems with some Firefox plugins preventing the debugger from attaching (I hit this with Firebug). If you're running Firefox, try disabling those plugins. If it's neither of these, please provide more details (your platform, Flex version, and Flash Player version).

Adding complex computed column at run-time fails in PB 12.6

I support a large 'vintage' application that was originally written in the late 90's, and has been migrated from version to version over the years. Currently I'm working to get it working in PB 12.6 Classic, build 3506, migrating it from PB 11.5
The first issue I've come across is that PFC treeviews are not working properly. After some debugging, I determined that the cause of the failure is the PFC code's creation of 'key' column in the datawindows being used to populate each level.
In the pfc_u_tv.of_createkey function, it looks at the linkages between the levels of a treeviews data, and then crafts an expression, and then uses that to create a computed column, which is subsequently used to uniquely identify the data.
The expression is a series of string concatenations, such as this:
expression='String(ctg_cd) + "#$%" + String(app_cd) + "#$%" + String(app_cd) + "#$%" + String(win_id) + "#$%" + String(ctg_cd) + "#$%"'
This expression is then used in a modify statement to create the new compute key column:
ls_rc = ads_obj.Modify("create compute(band=detail x='0' y='0' " + &
"height='0' width='0' name=pfc_tvi_key " + ls_Exp + ")")
In earlier versions, this works, and when you do a getitemstring afterward you get a long concatenated value that PFC uses to uniquely identify treeview items.
Such as 'a/r#$%plcy#$%plcy#$%w_m_plcy_fncl_tran#$%a/r#$%'
However, in PB 12.6, only the first portion of the expression is processed. There is no error returned from the Modify function, and the column is created, but the expression is only evaluating one part of the expression. In this partiular case, it results in
'plcy'
I just noticed that this isn't the *first* item in the set of concatenated columns and string literals, which is interesting. In any case, when the computed key values are not correct, the whole method PFC is using to populate and run the treeview falls apart, and you get all children under each parent, and selections on the treeview object do not work properly because the key column values are not unique.
I can copy the expression value from a debugging session, and use that to create a computed column at design time, pasting the expression in, and naming it the same as the created column (pfv_tvi_key), and this then allows the treeview to work properly. However, this is a very cumbersome and problematic workaround. The application has a lot of treeviews, with a very large number of datawindows operating as all the different types of items on different levels of different trees. I don't think it's a practical workaround, and future maintenance would be very difficult.
bu the workaround still demonstrates it is not an issue with the syntax of the compute expression, just an issue with the way it is handled by PowerBuilder when a column is created at run time,vs. at design time.
Has anyone else encountered this issue? I would think there are a fair number of older apps still around that are using PFC treeviews.
My next step will be to install PB 12.6 build 4011 and cross my fingers. Other than that, perhaps try 12.5?

Updating the PFC layers has started to lead down a rabbit hole of hundreds and hundreds of errors.
Granted, many of these are probably rooted in a few ancestor issues.
But I'm not sure this will lead to a solution.
The problem lies in using a modify statement to create a computed column at run time containing an expression with multiple concatenated values.
If I look at the pfc_u_tv.of_createkey function from the newer PFC version, I see the same code there:
ls_rc = ads_obj.Modify("create compute(band=detail x='0' y='0' " + &
"height='0' width='0' name=pfc_tvi_key " + ls_Exp + ")")
And the same code above it which creates the expression used in the modify.
So after doing all the patching for the new PFC version, I somehow suspect I'll still be facing the same datastore.modify problem.
Not to say that isn't a good thing to do, just not sure it addresses the root of the problem.

MCB2300 Run Debug Failed

Similar Messages

Maybe you are looking for