MCOD Installation

Hello,
In MCOD we can install multileple SAP components in one DB. It means multiple comoments have only one single DB Instance or each component has its unique DB Instance?
Thanks for your help
Kris

Hi Kris,
>
> In MCOD we can install multileple SAP components in one DB. It means multiple comoments have only one single DB Instance
or each component has its unique DB Instance?
In MCOD system, DB instance will be single but every system will have their own database schema. For more information check below link:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80bf0979-8e07-2a10-e486-d72e3aa81f80?overridelayout=true
SAP note 443925
Thanks
Sunny

Similar Messages

MCOD Installation - Error ORA-1403 when accessing table SAPUSER

Hello.
We are in middle of a MCOD installation of 4.7 x 2.00 SR1 with BW 3.1 on Windows 2003/Oracle.
BW 3.1 is up and running, while 4.7 fails on R3loads.
Following are SAP000.log and SAPUSER.log files:
SAP000.log
===============================
D:\usr\sap\D11\SYS\exe\run/R3load.exe: START OF LOG: 20060507193904
D:\usr\sap\D11\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
D:\usr\sap\D11\SYS\exe\run/R3load.exe: version R6.40/V1.4
D:\usr\sap\D11\SYS\exe\run/R3load.exe -dbcodepage 1100 -i D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAP0000.cmd -l D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAP0000.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) ERROR: DDL statement failed
(DROP TABLE "REPOLOAD")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: ORA-406 occured when executing SQL statement (parse error offset = 0)
(DB) ERROR: DDL statement failed
(CREATE TABLE "REPOLOAD" ( "PROGNAME" VARCHAR2(40) DEFAULT ' ' NOT NULL , "R3STATE" VARCHAR2(1) DEFAULT ' ' NOT NULL , "MACH" NUMBER(5) DEFAULT 0 NOT NULL , "UNAM" VARCHAR2(12) DEFAULT ' ' NOT NULL , "UDAT" VARCHAR2(8) DEFAULT '00000000' NOT NULL , "UTIME" VARCHAR2(6) DEFAULT '000000' NOT NULL , "L_DATALG" NUMBER(10) DEFAULT 0 NOT NULL , "Q_DATALG" NUMBER(10) DEFAULT 0 NOT NULL , "SDAT" VARCHAR2(8) DEFAULT '00000000' NOT NULL , "STIME" VARCHAR2(6) DEFAULT '000000' NOT NULL , "MINOR_VERS" NUMBER(5) DEFAULT 0 NOT NULL , "MAJOR_VERS" NUMBER(10) DEFAULT 0 NOT NULL , "LDATA" BLOB , "QDATA" BLOB ) TABLESPACE PSAPD11620 STORAGE (INITIAL 0000000016K NEXT 0000040960K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 406)
error message returned by DbSl:
ORA-00406: COMPATIBLE parameter needs to be 9.2.0.0.0 or greater
(DB) INFO: disconnected from DB
D:\usr\sap\D11\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\D11\SYS\exe\run/R3load.exe: END OF LOG: 20060507193905
========================================
SAPUSER.log
==============================
D:\usr\sap\D11\SYS\exe\run/R3load.exe: START OF LOG: 20060507193834
D:\usr\sap\D11\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
D:\usr\sap\D11\SYS\exe\run/R3load.exe: version R6.40/V1.4
D:\usr\sap\D11\SYS\exe\run/R3load.exe -dbcodepage 1100 -i D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAPUSER.cmd -l D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAPUSER.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) INFO: disconnected from DB
D:\usr\sap\D11\SYS\exe\run/R3load.exe: job completed
D:\usr\sap\D11\SYS\exe\run/R3load.exe: END OF LOG: 20060507193835
==============================================
Kindly look into it.
Thanks
KT

Hi KT,
Actually the problem is not ORA-1403, but the <i>ORA-00406: COMPATIBLE parameter needs to be 9.2.0.0.0 or greater</i>.
Please update the COMPATIBLE parameter in your init<SID>.ora file and restart the database. This should fix your problem.
Kind regards,
Alexander Webster
P.S. points are appreciated if my reply was helpfull.
Message was edited by: Alexander Webster
Removed typo

Uninstall ECC Instance in MCOD installation

Hello
We are currently running 2 SAP ECC 6.0 on one database (MCOD), is it possible to uninstall one of the instances without affecting the other?
can we remove only one schema in the DB?
Kind Regards

Dmerchan
Ok, how do i uninstall SAP instance in MCOD installation? through SAPinst?
Yes.
is there a guide to do that?
You can find that information in installation guide
Thanks
Sushil

Effects of EHP4 on MCOD installations

Hello All,
Can you let me know what are the effects of EHP4 on MCOD installation
I have two SAP instances installed on 1 sql server,how does it effect the second instance when I perform the EHP4 upgrade of one instance
Rohit

Hi Rohit,
As Juan stated installing EHP on one of the system will not effect other MCOD system..
But only thing you need to take care is while installing EHP on one of MCOD system then archiving should be on as other system will be in operation...
Thanks
Sunny

MCOD Installation on ONE Computer

is it possible to do a MCOD installation on one computer?
actually i encountered serious problems installing the SRM Server in a data base of an existing CRM System.
one problem i see is, that the user environment variables of the administrator are overwritten.
i think this was the reason why i run into errors while installing the database data base load.
could i perform an MCOD installation employing several ADMINISTRATOR accounts for each sap system to avoid this problem?
or what is the real problem with MCOD installations on one computer? has anyone else already tried it?
Message was edited by: Gideon Lenz

Hi,
Check the note 388866, it gives directions to where you find more resources on MCOD.. i believe it gives the email id of the SAP chap who deals with MCOD.
Also check the FAQ on http://service.sap.com/mcod
Hope that helps
Regards,
Siddhesh

MCOD installation with differents hosts

Hi.
I have a trouble with an (MCOD) Java installation of a BI system.
I already installed the ABAP stack of BI on a server (called myhost1) with the SID RW1 and the ABAP schema called SAPSR3.
I try to install, on a 2nd server called myhost2, the Java stack of a BI system (AS JAVA and BI JAVA) in MCOD. The SID of my JAVA stack is RJ1. But, during the install. process, when I have to fill the DBSID (i.e. RW1), the field Database host already contains myhost2 and I can't change the value to myhost1.
So my question is : is it possible to install a Java stack in MCOD on a different physical server than the one where the ABAP instance is installed ?
Thanks for your help
Best regards.
David.

Hi Rohit,
This means...
1. I need to agiain run the Oracle setup with Differnt SID and then I need to install the SAP on the New Installation is it..
2. its same procedure for the SQL also is it.

Mcod installation pre-requisites

Dear All,
I am about to install MCOD system. ECC6.0 is already installed on the host,
Now It is needed to install CRM 5.0 on to the same host and same database oracle.
Could you please let me know what are the pre-requisites we take before i start the
CRM installation.
- Do we have any effect on to the existing env. variables because i have to start
installation from the same host -root user
- Do we need to take any special actions for the listener configuration?
- I got through from Inst guide , we need to increase the free space in SYSTEM tablespace
if you can provide any other pre-requisites, It will be greatful for me.
Thanks and Regards

> I am about to install MCOD system. ECC6.0 is already installed on the host,
> Now It is needed to install CRM 5.0 on to the same host and same database oracle.
Are you really SURE you want to do that? MCOD has more drawbacks that pro's.
- Database maintenance requires both systems (ERP + CRM) to be shut down
- system copies using backup/restore are always done for both systems (can be tricky)
- in case of a logical error you have to reset both systems (imagine that in your ERP!)
I would install a separate Oracle software and use a second ORACLE_HOME to separate both instances from each other. The only cost of that is local harddisk space for the Oracle software.
Markus

MCOD installation fails during Database instance phase "CREATE TABLESPACES

We are installing solution manager 3.2 using MCOD option on windows 2003/oracle. Installation fails during Database instance phase "CREATE TABLESPACES" step without any error. Interesting thing is no error message in installation log or oracle alert log.
Installation Details
First instance: SMD / Instance number: 00 / schema: sapsmd / Database SID: SMD
Second instance; SMQ / Instance number: 01 / schema: sapsmq / Database SID: SMD
Did any one come across this issue? Any help is greatly appreciated.
Thanks

Hi,
Did u checked for the Space utilization on the drives.Normally when installation fails there will be some intimation of the cause in the log files written in the sapinst directory.IF it is failing in the tablespace creation phase the that means that the data files cannot be created.
It depends on the database you use: Data files(Oracle), Containers (DB2).
Do check in the sapdata directories whethere the data file have created.
If its not giving you any error then the installation might got stuck bcoz of some memory problems during the "create tablespace phase"
Regards
Ashly.

Kernal Upgrade in MCOD installation

Hi experts,
In My landscape 3 servers DEV,QTY and PRD. but DEV & QTY is MCOD installed.
and i want to Upgrade the Kernel on DEV Server only.
when i uncar the database dependent and database independent .SAR files in /sapmnt/sid/exe.
but which command i executed after this.
./saproot.sh sid <DBSID>
What is DBSID ???
In Devlopement system
SID--DEV
instance No--00
in st04
DBSID---DEV
& QTY sysetm.
SID--QTY
instance No--01
in st04
DBSID---DEV
Os--HPUX
Oracle 10g ECC 6.0
Regards,
Vivek

Dear vivek,
Hope you are doing good.
Also the below links will help you if there are any queries with the kernel update procedure.
If you wish to do a Manual Kernel Upgrade:
<http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/
70d8838d-cb8f-2c10-7ab8-d1504670fbb8>
Kernel upgrade using JSPM:
<Video Blog: Applying Support Packages Stacks with JSPM>
and
SAP Note No. 19466: Downloading SAP kernel patches
Thank you and have a nice day :).
Kind Regards,
Hemanth

Install SAP Solution Manager with DEV instance in the same server (MCOD)

Hello, i would like to install SAP Solutions Manager together with DEV ECC 6.0 in the same host, DEV is currently installed and working fine.
I followed note 551915 to convert MS-SQL 2005 to MCOD (change of schema from dbo to dev) and worked fine. But when i am installing the SolMan through the sapinst i don´t see the option MCOD
The only option i am confussed is
MS SQL Server
Database reuse o - New Database (DBSID = SAPSID)
o - Use Existing Database
Database ID (DBSID)
Witch option should i choose to perform a MCOD installation? new db or use existing db (DEV)?
Kind Regards

Hi Merchan, if you want to use MCOD you need to select the option: o - Use Existing Database
Database ID (DBSID) .
Regards,
Darwin C.

MCOD and DB13 (ORA-01031: insufficient privileges)

Hello Oracle experts,
I have a problem with a MCOD installation.
Situation:
I have an Oracle Real Application Cluster with two database instances (DE1_1 and DE1_2). In database 1 (DE1_1) there are running two SAP systems (DE1 and DE2).
In database 2 (DE1_2) there are running also two SAP systems (QE1 and QE2).
DE1: SAPSR3     (DE1_1 )
DE2: SAPSR4     (DE1_1)
QE1: SAPSR5     (DE1_2)
QE2: SAPSR6     (DE1_2)
DE1 has been the first installation. The next one´s have been DE2 (SAPSR4), QE1 (SAPSR5) and QE2 (SAPSR6).
Complication:
Transaction DB13 is making trouble in the systems DE2, QE1 and QE2.
There is a pop-up containing this information:
SQL Errorcode: 1.031
SELECT beg, funct, sysid, obj, rc, ende, actid, line FROM sap_sdbah
WHERE beg BETWEEN '20110416000000' AND '20110524235959' AND sysid = 'DE1'
ORA-01031: insufficient privileges
I can confirm this popup and reach the DBA Planning Calendar. In the message window there are two error messages:
- An error occurred when processing system DE2
- Function ORA_LOG_READ failed with return code = Other error
Only in the first system (DE1) there are no problems when calling DB13!
Solution:
I already checked the following notes:
Note 134592 - Importing the SAPDBA role (sapdba_role.sql)
--> I executed the script from the note.
Note 834917 - Oracle Database 10g: New database role SAPCONN
--> I executed the script from the note.
And checked this:
SQL> select grantee, granted_role from dba_role_privs
where granted_role in ('SAPDBA', 'SAPCONN');
GRANTEE                        GRANTED_ROLE
SYS                            SAPDBA
OPS$SAPSERVICEDE2              SAPDBA
OPS$SAPSERVICEQE1              SAPDBA
OPS$QE1ADM                     SAPDBA
SAPSR6                         SAPCONN
OPS$ORADE1                     SAPDBA
SAPSR5                         SAPCONN
OPS$QE2ADM                     SAPDBA
OPS$SAPSERVICEQE2              SAPDBA
SYS                            SAPCONN
OPS$DE1ADM                     SAPDBA
GRANTEE                        GRANTED_ROLE
SAPSR3                         SAPCONN
OPS$SAPSERVICEDE1              SAPDBA
SAPSR4                         SAPCONN
SYSTEM                         SAPDBA
OPS$DE2ADM                     SAPDBA
16 rows selected.
Is it correct that there is only ONE ORA<SID>?
The rest is correct regarding the note.
Note 1028220 - ORA-01031: Insufficient privileges despite SAPCONN role
Checked this statement:
SQL> select grantee, granted_role, default_role from dba_role_privs
where grantee = 'SAPSR6';
GRANTEE                        GRANTED_ROLE                   DEF
SAPSR6                         SAPCONN                        YES
It´s correct regarding the note.
Note 91216 - BRBACKUP/SAPDBA: ORA-01031 Insufficient privileges
Checked it!
Note 400241 - Problems with ops$ or sapr3 connect to Oracle
SQL> SELECT OWNER, TABLE_OWNER, TABLE_NAME FROM DBA_SYNONYMS
WHERE SYNONYM_NAME = 'SAPUSER';
OWNER                          TABLE_OWNER
TABLE_NAME
OPS$SAPSERVICEDE1              OPS$DE1ADM
SAPUSER
OPS$SAPSERVICEDE2              OPS$DE2ADM
SAPUSER
OPS$SAPSERVICEQE1              OPS$QE1ADM
SAPUSER
OWNER                          TABLE_OWNER
TABLE_NAME
OPS$SAPSERVICEQE2              OPS$QE2ADM
SAPUSER
It´s correct regarding the note.
Note 113747 - Permissions for DBA tools BR*Tools and SAPDBA
Permissons for BR*Tools are adjusted regarding this note.
It is still not working!!
Any further suggestions? I don´t know exactly what to configure in a MCOD database. Maybe I forgot one thingu2026
Thank you in advance and kind regards,
Geraldine

Well, it's up to you whether or not you consider that a problem.
And it seems SAP doesn't.
The solution for your ORA-01031 probably will be:
In the schema of Oracle user SAPSR3 there are tables SDBAH and SDBAD. Grant full access to Oracle users SAPSR4/5/6.
But afterwards you may encounter another error message.
You have been warned.
Not sure if this is documented anywhere.
And as I wrote, I doubt that it is worth the effort...
It always seemed SAP did not really like nor support MCOD installations. So by now we haven't any of them left.
regards

SIDS on oracle installation.

Hi,
Iam doing installation on windows with oracle on ecc 6.0,first its asking sapsid,and in next its asking dbsid.
for the both times we have to give same sid or diffrent.
Thanku

"it depends". Usually they are the same but not in an MCOD installation.
Read the installation guides, they will tell what to enter where.
Markus

SAP ERP ECC6.0 SR3 EHP4 IDES Installation Questions

I have downloaded some IDES SR3 EHP4 installation files from SWDC.
I installed Windows 2003 Server 64 bit, Oracle 10.2.0.4 and Java 1.4 on VMWare.
Now I don't know how to proceed from here because I have some doubt.
1. What Dics Number should I download? Currently I have downloaded 50096277, 51031678, 51036767 UC and Non UC, 51036905, 51036971, 51036972, 51037093, 51037095, 51037622, 51037623.
2. I've seen some post saying ABAP + Java stack cannot be installed in the same SID. If I installed using different SID will it incur additional hard disk space? What need to be done to install both stack in the same machine with different SID?
3. Can anyone provide me a brief installation guide if he successfully installed IDES EHP4 before?

Hi,
1. What Dics Number should I download?
Please check that you would need the following disk for the installation.
Installation master DVD, Export DVD for the IDES,Oracle client ,Kernel DVD, database for oracle DVD(RDBMS) and you shall need the Java software component DVD for the installation.
2. I've seen some post saying ABAP + Java stack cannot be installed in the same SID
I think you will have to go with the Mcod installation and the SID fo both ABAP and JAVA should be different .
3. Can anyone provide me a brief installation guide if he successfully installed IDES EHP4 before?
Go to service market place and you shall find the installation guide for the perticular os and the Db for which you are going for the installation.
Thanks
Rishi Abrol

Separating the MCOD system

If anyone have any experience in separating MCOD database which is on version DB2 V8.1 fp10, please guide me on how to proceed.
Best regards,
AL

"Separating" an MCOD installation can be (easily) done using a homogeneous system copy using R3load:
http://service.sap.com/systemcopy
After you have copied one of the systems you can delete that schema on database level.
Markus

Multiple Logical Systems in Partner Profile for one instance

Can we create multiple Logical Systems in Partner Profile (WE20) for one instance or one System? If it is possible, can we create Logical System with respect to Plant/Country?

I am not quite sure if I understood your problem completley. But let's see...
Usually you use on on MSCS Cluster Group per SAP instance. So you have your already existing NW 7.0 ABAP stack in a separated Cluster Group, and you create a new Cluster Group for your new Java system.
You can find more information about it in this guide here on SDN:
Link: [High Availability;
More information about High Availability Setups for SAP System can be found here on SDN:
Link: [High Availability]
If you want to use the same database for your clustered ABAP stack and your new Java stack you can do a MCOD installation.
Please see Link: [SAP Note 388866 - Multiple Components on One Database - Installation|https://service.sap.com/sap/support/notes/388866]
Hope this helps.
Best regards,
Mathias

MCOD Installation

Similar Messages

Maybe you are looking for