MCOD installation with differents hosts
Hi.
I have a trouble with an (MCOD) Java installation of a BI system.
I already installed the ABAP stack of BI on a server (called myhost1) with the SID RW1 and the ABAP schema called SAPSR3.
I try to install, on a 2nd server called myhost2, the Java stack of a BI system (AS JAVA and BI JAVA) in MCOD. The SID of my JAVA stack is RJ1. But, during the install. process, when I have to fill the DBSID (i.e. RW1), the field Database host already contains myhost2 and I can't change the value to myhost1.
So my question is : is it possible to install a Java stack in MCOD on a different physical server than the one where the ABAP instance is installed ?
Thanks for your help
Best regards.
David.
Hi Rohit,
This means...
1. I need to agiain run the Oracle setup with Differnt SID and then I need to install the SAP on the New Installation is it..
2. its same procedure for the SQL also is it.
Similar Messages
-
SAP R-3 IDES 4.71 installation with Oracle9i
Hello
I am having problems installing SAP R-3 IDES 4.71 installation with Oracle9i on windows 2003 Server. The log file comes up with this erorr
INFO 2008-05-14 22:50:30
Changed working directory to C:\SAPinst ORACLE SAPINST.
INFO 2008-05-14 22:53:59
See 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' output in 'C:\SAPinst ORACLE SAPINST\startsap.log'.
TRACE
ProgramReturnCode='-1' means error.
ERROR 2030-05-14 22:53:59
MOS-01012 PROBLEM: 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' returned with '-1' which is not a defined as a success code.
Windows 2003 Server
AMD 2GH Dual core
2GB Ram
250GB HDD
Computer name: bw2003
Central instance: DEV
I checked the host file system32/drivers/etc the IP adress and the host name is there.
I am hoping that someone could help me with the installation thanks in advance.
waiting .....ok here you go
dev_disp
trc file: "dev_disp", trc level: 1, release: "620"
Sat May 18 00:27:08 2030
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 2276
***LOG Q00=> DpSapEnvInit, DPStart (00 2276) [dpxxdisp.c 978]
shared lib "dw_xml.dll" version 674 successfully loaded
shared lib "dw_xtc.dll" version 674 successfully loaded
shared lib "dw_stl.dll" version 674 successfully loaded
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 9776 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 042F0040, size: 1974816)
DpShMCreate: allocated sys_adm at 042F0040
DpShMCreate: allocated wp_adm at 042F0560
DpShMCreate: allocated tm_adm_list at 042F2B90
DpShMCreate: allocated tm_adm at 042F2BB8
DpShMCreate: allocated wp_ca_adm at 0448F878
DpShMCreate: allocated appc_ca_adm at 04493EC8
DpShMCreate: allocated comm_adm_list at 04495638
DpShMCreate: allocated comm_adm at 04495650
DpShMCreate: allocated ca_info at 044C4450
DpShMCreate: allocated wall_adm at 044C4458
MBUF state OFF
Sat May 18 00:27:09 2030
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 307 MB
<ES> 306 blocks reserved for free list.
ES initialized.
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, NiPServToNo ( sapmsDEV) [nixxi.c 2599]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1451]
Sat May 18 00:27:18 2030
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Sat May 18 00:27:32 2030
CCMS: start to initalize 3.X shared alert area (first segment).
Sat May 18 00:27:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
Sat May 18 00:27:50 2030
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:28:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:28:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:28:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:29:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W0 (pid 2328) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W11 (pid 2416) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
my types changed after wp death/restart 0xbf --> 0xaf
ERROR => MsIModTypes: not_attached [msxxi.c 1567]
Sat May 18 00:29:30 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W5 (pid 2368) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W6 (pid 2376) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W7 (pid 2384) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
my types changed after wp death/restart 0xaf --> 0xad
ERROR => MsIModTypes: not_attached [msxxi.c 1567]
Sat May 18 00:29:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W2 (pid 2344) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
ERROR => W8 (pid 2392) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W10 (pid 2408) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
ERROR => W12 (pid 2424) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
my types changed after wp death/restart 0xad --> 0x89
ERROR => MsIModTypes: not_attached [msxxi.c 1567]
Sat May 18 00:30:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W1 (pid 2336) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
Sat May 18 00:30:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:30:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:31:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:31:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:31:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:32:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W3 (pid 2352) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 2360) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W9 (pid 2400) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
Sat May 18 00:32:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:32:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:32:51 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
Sat May 18 00:33:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:33:11 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
Sat May 18 00:33:13 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
Sat May 18 00:33:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:33:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:34:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:34:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:34:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:35:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:35:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:35:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:36:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:36:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:36:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:37:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:37:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:37:33 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
Sat May 18 00:37:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:38:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:38:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:38:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:39:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:39:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:39:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:40:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:40:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:40:30 2030
caught signal 2
Sat May 18 00:40:42 2030
***LOG Q05=> DpHalt, DPStop ( 2276) [dpxxdisp.c 7883]
dev_w0
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sat May 18 00:27:19 2030
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 2328
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2328) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M
M Sat May 18 00:27:24 2030
M DpShMCreate: sizeof(wp_adm) 9776 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04AF0040, size: 1974816)
M DpShMCreate: allocated sys_adm at 04AF0040
M DpShMCreate: allocated wp_adm at 04AF0560
M DpShMCreate: allocated tm_adm_list at 04AF2B90
M DpShMCreate: allocated tm_adm at 04AF2BB8
M DpShMCreate: allocated wp_ca_adm at 04C8F878
M DpShMCreate: allocated appc_ca_adm at 04C93EC8
M DpShMCreate: allocated comm_adm_list at 04C95638
M DpShMCreate: allocated comm_adm at 04C95650
M DpShMCreate: allocated ca_info at 04CC4450
M DpShMCreate: allocated wall_adm at 04CC4458
X
X Sat May 18 00:27:28 2030
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Sat May 18 00:27:33 2030
M calling db_connect ...
C Got ORACLE_HOME=C:\oracle\ora92 from environment
C
C Sat May 18 00:28:05 2030
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C
C Sat May 18 00:28:06 2030
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 ...
C Attaching to DB Server DEV (con_hdl=0,svchp=062414CC,svrhp=06243724)
C
C Sat May 18 00:28:17 2030
C Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
C
C Sat May 18 00:28:33 2030
C Now I'm connected to ORACLE
C Got SAPDEV's password from table SAPUSER
C Got SAPDEV's password from OPS$-user
C Disconnecting from connection 0 ...
C
C Sat May 18 00:28:34 2030
C Closing user session (con_hdl=0,svchp=062414CC,usrhp=0624BEFC)
C Now I'm disconnected from ORACLE
C Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
C Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
C Now I'm connected to ORACLE
C Database NLS settings: AMERICAN_AMERICA.WE8DEC
C Database instance dev is running on BW2003 with ORACLE version 9.2.0.2.1 since 20300518
B
B Sat May 18 00:28:35 2030
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 20300518 002733 BW2003
M
M Sat May 18 00:28:36 2030
M db_connect o.k.
I
I Sat May 18 00:29:01 2030
I MtxInit: 0 0 0
X
X Sat May 18 00:29:02 2030
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13
B dbtbxbuf: Buffer TABL (addr: 0C2000C8, size: 30000000, end: 0DE9C448)
B dbtbxbuf: Buffer TABLP (addr: 0DEA00C8, size: 10240000, end: 0E8640C8)
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 276 = 276
B 2: 13 * 20 = 260
B 3: 4001 * 40 = 160040
B 4: 2000 * 128 = 256000
B 5: 4001 * 4 = 16004
B 6: 1 * 100 = 100
B 7: 65 * 4 = 260
B 8: 29385 * 128 = 3761280
B Tracing = 0, Shm Protection = 0, Force checks = 0
I *** ERROR => [CreateOsShm] CreateFileMapping(54,4096 KB) failed with Err=1455
ERROR_COMMITMENT_LIMIT: The paging file is too small for this operation to complete. [shmnt.c 2055]
I *** ERROR => ShmCreate: Create (54,4194384,1) failed [shmnt.c 469]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel unknown
Processor-Count : 1
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 1
NT Pagefile Informations
Config. minimum size : 589824 K
Config. maximum size : 1179648 K
Avail. maximum size : 1179648 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
C:\pagefile.sys
589824 K
1179648 K
1179648 K
1178900 K
NT Task Manager Informations
Total Handles : 0
Total Threads : 0
Total Processes : 0
Commit Charge Total : 1670224 K
Commit Charge Limit : 1676596 K
Commit Charge Peak : 1670376 K
Phys.Memory Total : 0 K
Phys.Memory Available : 0 K
File Cache : 0 K
Kernel Memory Total : 0 K
Kernel Memory Paged : 0 K
Kernel Memory Nonpaged : 0 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 1133576 K
Private Pages : 0 K
Total heap size : 10729 K
Virtual memory regions : 0 K
Uncommitted heap memory : 4108 K
Allocated heap memory : 4406 K
Moveable heap memory : 24 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
4
72 K
2100 K
0 K
0 K
3
352
smss.exe
212 K
448 K
144 K
160 K
0
424
winlogon.exe
996 K
9048 K
6188 K
6580 K
3
468
services.exe
1276 K
3136 K
1436 K
1564 K
0
480
lsass.exe
2148 K
6544 K
7048 K
7048 K
1
676
svchost.exe
552 K
2508 K
832 K
832 K
0
848
svchost.exe
4840 K
22520 K
13348 K
19208 K
9
972
spoolsv.exe
712 K
4060 K
3220 K
3228 K
1
1124
svchost.exe
392 K
1956 K
476 K
476 K
0
1176
agntsrvc.exe
948 K
7720 K
9128 K
9128 K
1
1196
TNSLSNR.exe
2432 K
5720 K
5764 K
5776 K
1
1212
cmd.exe
384 K
1572 K
1488 K
1488 K
0
1228
ORACLE.EXE
122564 K
135924 K
203080 K
205256 K
38
1324
SAPSTARTSRV.EXE
2520 K
13364 K
14828 K
14828 K
3
1420
VMwareService.exe
928 K
2164 K
604 K
604 K
0
1528
dbsnmp.exe
2240 K
11312 K
13608 K
39264 K
3
1816
Explorer.EXE
2928 K
15120 K
10200 K
10332 K
13
1864
jusched.exe
252 K
1764 K
432 K
432 K
0
1872
VMwareTray.exe
724 K
3144 K
852 K
888 K
0
1880
VMwareUser.exe
1376 K
3284 K
1032 K
1048 K
0
1996
svchost.exe
488 K
3740 K
1440 K
21664 K
1
216
svchost.exe
800 K
3708 K
2788 K
2788 K
0
2080
sapinst.exe
82868 K
105272 K
84324 K
105292 K
41
2088
javaw.exe
6944 K
21272 K
20396 K
20896 K
6
2200
startsap.exe
460 K
1772 K
748 K
748 K
0
2212
sapstart.exe
1244 K
3176 K
1188 K
1188 K
0
2276
disp+work.exe
[DP] DEV_00
26740 K
42464 K
30176 K
30176 K
10
2312
gwrd.EXE
[GW] DEV_00
1852 K
6116 K
3936 K
8208 K
1
2320
icman.EXE
56440 K
60192 K
75880 K
75880 K
17
2328
disp+work.EXE
[WP] DEV_00
10700 K
11516 K
43684 K
43788 K
7
2336
disp+work.EXE
[WP] DEV_00
6696 K
13084 K
42180 K
42180 K
6
2344
disp+work.EXE
[WP] DEV_00
10896 K
14092 K
42180 K
42180 K
6
2352
disp+work.EXE
[WP] DEV_00
10088 K
14588 K
42176 K
42176 K
6
2360
disp+work.EXE
[WP] DEV_00
9320 K
12960 K
42184 K
42184 K
6
2368
disp+work.EXE
[WP] DEV_00
9480 K
13076 K
42184 K
42184 K
6
2376
disp+work.EXE
[WP] DEV_00
10060 K
13220 K
42180 K
42180 K
6
2384
disp+work.EXE
[WP] DEV_00
10024 K
15128 K
42184 K
42184 K
6
2392
disp+work.EXE
[WP] DEV_00
6576 K
14752 K
42180 K
42180 K
6
2400
disp+work.EXE
[WP] DEV_00
8812 K
13436 K
42184 K
42184 K
6
2408
disp+work.EXE
[WP] DEV_00
8552 K
16140 K
42180 K
42180 K
6
2416
disp+work.EXE
25744 K
25972 K
41644 K
43788 K
10
2424
disp+work.EXE
[WP] DEV_00
6848 K
11060 K
42180 K
42180 K
6
Sum
460128 K
1063904 K
B dbexpbuf[0]: Shm 54: create failed
B ***LOG BBF=> internal error in export/import buffer: object buf init fail [dbexpbuf#4 @ 2611] [dbexpbuf2611 ]
B dbexpbuf: return code (sap_rc): 4
B Buffer 0 will not be available
B Unexpected returncode from db_exp_init(EXP_ATP) : 4
B db_objinit failed
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 237]
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 1656]
M ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1159]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server bw2003_DEV_00 on host bw2003 (wp 0)
M * ERROR tskh_init: ThIPCInit
M *
M * TIME Sat May 18 00:29:02 2030
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 17
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2328) [dpnttool.c 346]
M SemCleanup: Reset blocking on semaphore (Key:4/Slot:3)
Thanks buddy
waiting... -
I upgraded from Dreamweaver CS4 to CS6. but now when I want to upload I get "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?
Mac OS 10.8.5
None of these issues are causing the error in DW CS6. We have double checked all of them and we have everything exactly right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Could there must be factor in 6 that didn't exist in 4? Something that isnt in the SiteSetup but in some hidden dialog box ?
I can also upload to my host using Fetch, a third party FTP. And as I said DW CS4 works fine. So the problem is not with my host, its with DW CS6 in particular.Thank you Jon, that fixed it perfectly. You have saved me from going crazy. The only difference I see now is in "Server Name" it changed what I had entered (my ftp address) to "Remote Server"; which seems odd -- but it works! Although I know there maybe also some other dialog box I have never seen
Of course I saw that menu item "Import" and but I thought thats obviously not for me: "Why would I want to import an entire website?". I did not however see "Export the selected site" for thats only a tiny icon in the footer. However I would have thought the same: "Why would I want to export my entire website?".
An observation: I've seen this problem in a lot of Adobe software, the menu-names of items are obscure, non descriptive. What would be better would be for the menu names or popups to say "Export Site Setup settings" and "Import Site Setup settings" -
Problem with NW04s SR2 installation with MS SQL Server 2000 SP4
Im struggling with the NW04s installation with MS SQL Server 2000.
The installation stops at the step Create/modify database schema SAPJ2EDB.
The following error/info from log file,
INFO 2007-06-06 12:02:33 [iaxxgenimp.cpp:632]
showDialog()
Execute step doConfiguration of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|NW_MSS_SRVCFG|ind|ind|ind|ind|6|0.
INFO 2007-06-06 12:02:35 [iaxxgenimp.cpp:632]
showDialog()
Execute step doTempdb of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:36 [iaxxgenimp.cpp:632]
showDialog()
Execute step doSwitch of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:36 [iaxxgenimp.cpp:632]
showDialog()
Execute step doTempDBAnalyze of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:37 [iaxxgenimp.cpp:632]
showDialog()
Execute step doTempDBBeforeRestart of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:38 [iaxxgenimp.cpp:632]
showDialog()
Execute step doRestartServer of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:58 [ianxbservi.cpp:697]
CIaNtServices::stop(const map<iastring,iastring>&)
The service 'MSSQLSERVER' stopped successfully on host 'GBCZ672C'.
INFO 2007-06-06 12:03:10 [ianxbservi.cpp:632]
CIaNtServices::start(const map<iastring,iastring>&)
The service 'MSSQLSERVER' started successfully on host 'GBCZ672C'.
INFO 2007-06-06 12:03:21 [ianxbservi.cpp:632]
CIaNtServices::start(const map<iastring,iastring>&)
The service 'SQLSERVERAGENT' started successfully on host 'GBCZ672C'.
INFO 2007-06-06 12:03:21 [iaxxgenimp.cpp:632]
showDialog()
Execute step doTempDBAfterRestart of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:03:22 [iaxxgenimp.cpp:632]
showDialog()
Execute step doChangeTempSetNewSize of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:03:39 [iaxxgenimp.cpp:632]
showDialog()
Execute step CheckParameters of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
INFO 2007-06-06 12:03:39 [iaxxgenimp.cpp:632]
showDialog()
Execute step CreateDirectories of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
INFO 2007-06-06 12:03:40 [iaxxgenimp.cpp:632]
showDialog()
Execute step CreateDatabase of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
ERROR 2007-06-06 12:03:40 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR .
ERROR 2007-06-06 12:03:40
lib=iamodmssql module=CIaNtMssDmo
MDB-05053 Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.
INFO 2007-06-06 12:04:04 [iaxxgenimp.cpp:774]
showDialog()
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase".
ERROR 2007-06-06 12:04:05 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR .
Please let me know if you can help or if there is any other way around.
Many Thanks in advance.
Ritin JainHi All,
I was not able to solve the problem with MS SQL 2000, but I was able to resolve the issue with MS SQL 2005.
You have to chhose the following settings while instalation,
Service Account - Select one of the following options:
1) Use the built-in System account for each service and choose Local system or Network Service.
2) Use a domain user account, and enter the user name and password.
Under Start services at the end of setup make sure that SQL Server and SQL Server Agent are selected.
Authentication Mode
1) Select Mixed Mode (Windows Authentication and SQL Server Authentication).
This mode is required for a Java or ABAP+Java system.
If you choose this mode, you have to set the password for the sa login.
Note: The password for the sa login must comply with the Windows password policy.
Collation Settings
1) Select SQL collations (used for compatibility with previous versions of SQL Server).
2) From the drop-down list select Binary order based on code point comparison, for use with the 850 (Multilingual) Character Set.
I hope this helps! -
MCOD Installation - Error ORA-1403 when accessing table SAPUSER
Hello.
We are in middle of a MCOD installation of 4.7 x 2.00 SR1 with BW 3.1 on Windows 2003/Oracle.
BW 3.1 is up and running, while 4.7 fails on R3loads.
Following are SAP000.log and SAPUSER.log files:
SAP000.log
===============================
D:\usr\sap\D11\SYS\exe\run/R3load.exe: START OF LOG: 20060507193904
D:\usr\sap\D11\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
D:\usr\sap\D11\SYS\exe\run/R3load.exe: version R6.40/V1.4
D:\usr\sap\D11\SYS\exe\run/R3load.exe -dbcodepage 1100 -i D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAP0000.cmd -l D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAP0000.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) ERROR: DDL statement failed
(DROP TABLE "REPOLOAD")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: ORA-406 occured when executing SQL statement (parse error offset = 0)
(DB) ERROR: DDL statement failed
(CREATE TABLE "REPOLOAD" ( "PROGNAME" VARCHAR2(40) DEFAULT ' ' NOT NULL , "R3STATE" VARCHAR2(1) DEFAULT ' ' NOT NULL , "MACH" NUMBER(5) DEFAULT 0 NOT NULL , "UNAM" VARCHAR2(12) DEFAULT ' ' NOT NULL , "UDAT" VARCHAR2(8) DEFAULT '00000000' NOT NULL , "UTIME" VARCHAR2(6) DEFAULT '000000' NOT NULL , "L_DATALG" NUMBER(10) DEFAULT 0 NOT NULL , "Q_DATALG" NUMBER(10) DEFAULT 0 NOT NULL , "SDAT" VARCHAR2(8) DEFAULT '00000000' NOT NULL , "STIME" VARCHAR2(6) DEFAULT '000000' NOT NULL , "MINOR_VERS" NUMBER(5) DEFAULT 0 NOT NULL , "MAJOR_VERS" NUMBER(10) DEFAULT 0 NOT NULL , "LDATA" BLOB , "QDATA" BLOB ) TABLESPACE PSAPD11620 STORAGE (INITIAL 0000000016K NEXT 0000040960K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 406)
error message returned by DbSl:
ORA-00406: COMPATIBLE parameter needs to be 9.2.0.0.0 or greater
(DB) INFO: disconnected from DB
D:\usr\sap\D11\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\D11\SYS\exe\run/R3load.exe: END OF LOG: 20060507193905
========================================
SAPUSER.log
==============================
D:\usr\sap\D11\SYS\exe\run/R3load.exe: START OF LOG: 20060507193834
D:\usr\sap\D11\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
D:\usr\sap\D11\SYS\exe\run/R3load.exe: version R6.40/V1.4
D:\usr\sap\D11\SYS\exe\run/R3load.exe -dbcodepage 1100 -i D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAPUSER.cmd -l D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAPUSER.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) INFO: disconnected from DB
D:\usr\sap\D11\SYS\exe\run/R3load.exe: job completed
D:\usr\sap\D11\SYS\exe\run/R3load.exe: END OF LOG: 20060507193835
==============================================
Kindly look into it.
Thanks
KTHi KT,
Actually the problem is not ORA-1403, but the <i>ORA-00406: COMPATIBLE parameter needs to be 9.2.0.0.0 or greater</i>.
Please update the COMPATIBLE parameter in your init<SID>.ora file and restart the database. This should fix your problem.
Kind regards,
Alexander Webster
P.S. points are appreciated if my reply was helpfull.
Message was edited by: Alexander Webster
Removed typo -
Wf component container not starting with Virtual host
Hi,
We have setup fresh instance of R 12.1.1 on Solaris with Virtual host. Did installation with rapidwiz -servername virtual.
Now when we end setting up wfmailer setup it refused to start saying component services are not up. While looking at it, it is still looking for Physical host rather Virtual. Can anyone suggest how to resolve this.
ThanksPost in 11i thread closing it
-
MCOD Installation on ONE Computer
is it possible to do a MCOD installation on one computer?
actually i encountered serious problems installing the SRM Server in a data base of an existing CRM System.
one problem i see is, that the user environment variables of the administrator are overwritten.
i think this was the reason why i run into errors while installing the database data base load.
could i perform an MCOD installation employing several ADMINISTRATOR accounts for each sap system to avoid this problem?
or what is the real problem with MCOD installations on one computer? has anyone else already tried it?
Message was edited by: Gideon LenzHi,
Check the note 388866, it gives directions to where you find more resources on MCOD.. i believe it gives the email id of the SAP chap who deals with MCOD.
Also check the FAQ on http://service.sap.com/mcod
Hope that helps
Regards,
Siddhesh -
Oracle 10g R2 installation with ASM+RAC
Gurus,
Need some suggestuon on Oracle 10g R2 installation with ASM and RAC option.
We have found many documents on the Oracle, HP, HP-Oracle CTC and third party web sites, but nothing that is specific to this particular combination of separate
ORACLE_HOMEs, ASM and 10g RAC CRS. It is unclear for me from the documentation how this combination of ASM and 10.2g RAC may best be installed.
The high level steps i got after reading lot of docs as follows - but i am not sure whether these are correct or not. if they are correct, can any one share their experience/notes please?
1) Install CRS
2) Install RDBMS for ASM HOME - create separater oracle home for ASM instance using OUI
3) Install RDBMS for RAC Database Home - create separater oracle home for RAC database using OUI
4) Create ASM database using DBCA -
5) Use dbca to create database.Oracle provides 'paint by numbers' tutorials called 'Oracle By Example'. (Go to OTN, check under the Training tab)
They have one for a Windows based ASM/RAC that you might want to review. Not your specific environment, but the steps will be dag-nabbed close.
I recommend walking the path (http://otn.oracle.com >> training:OBE >> Database 10g Release 1:VMWare:Installation
http://www.oracle.com/technology/obe/obe10gdb_vmware/install/racinstallwin2k/racinstallwin2k.htm -
Multiple independent devices on Single installation with independent monthly rental charges
Hi Experts,
4 Independent single register based devices installed (Tech+ Billing) in a single installation with same time slice. There is only monthly rental charges for each independent meter. No meter reading required and NO consumption charges. I believe we can do this scenario. Can anybody advise for any consequences?
Note: number of devices can change from 2/3/4.Hi,
How are you going to satisfy the meter read orders to make it billable without entering the meter reads? If you do not need any meter read, can't you use any flat rate / time dependent prices? The amount output will be same but you will not be using any settle* variant program. You may use any Lumsum* variant program. If you do not use the devices for entering meter read, do you have any requirement of installing the devices with the utility installation?
Thanks.
Nirmalya -
hi, my software for example games , installation with another apple id and i want to update software but i cant , how can do this change ? i should go to itunes store to do this change or i cant at all?
you can change your apple id or password etc here http://www.apple.com/support/appleid/
Good Luck
Matthew -
Error in installation with NW04S
Hi,
error : CJS-30196. SAPBC JSF Communication role is not assigned to the user SAPJSF.
i am getting the fallowing error in installation with NW04S. while trying to assign the above role to the user.any body help me with the solution.
Thanks & Regards
kiran.BHi,
Assign the Role <b>SAP_BC_JSF_COMMUNICATION_RO</b> to the profile of SAPJSF user in production client and restart the installation.
Regards,
Siddhesh -
Hello, staff!
My site (http://теле.онлайн) have a contact form and i can't public site even on bys.catalist by using e-mail for sending form by my host-provider: info@теле.онлайн. If i use another one, for example my own - [email protected] - it is ok on bys.catalist, but it not working on my host, becouse the terns only allow to use their e-mail - info@теле.онлайн.
So, what we got now if i try to use info@теле.онлайн:
Can't public site on buisness catalist servise with that mistake - 400 bad gateway. (117007);
if i export site as HTML and load it to my host by using FileZilla - forms don't work with that message: theres mistake on server.
I've contacted with my host-provider and they say that only info@теле.онлайн are allowed to be used in form.
So now i need to know - is that possible to configure Muse with that e-mail?
What if not? I have a contract with Adobe for 1 year, what should i do now?
PS sorry for my english it's pure, but i'm trying my bestCreate a New User Account, and as that New User try to set up this one account -- as it is POP, set to leave messages on the server after download. If not familiar with setting up a New User Account, see:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
This will be a useful test, and is not meant to suggest a permanent switch to the New User Account, but rather a test of the Mail application outside of your normal User Account.
Also in System Preferences/Networks click on Advanced, then Proxies and make sure no proxy selections have been checked.
Ernie
Message was edited by: Ernie Stamper -
Help with the HOST and START, forms 6i
Hi i like open to image with de Host and Start in Forms 6i.
For example Host('start '||:path||'', NO_SCREEN ); -> is correct if the path is c:\ ... but if the path is more longer with space in white for example C:\Documents and settings ... i put the quotes "C:\Documents and settings ..." but Doesn't open the image, another window (MSDOS) open... :SHello,
Try this:
Host('cmd /c START "" "' || :path || '" ');Francois -
[Solved]Can't finish The Hobbit installation with virtual drive
Is there any way that I could combine two iso files into one so that I could finish The Hobbit installation process. I always get stuck at the point where it asks for the second disk and gnome-disk-utility won't unmount the first ISO because it's still in use by the installation process.
I tried doing this
$ sudo mount -t iso9660 -o loop disc1-mountpoint
$ sudo mount -t iso9660 -o loop disc2-mountpoint
$ sudo mkisofs -l -J -R -o dvd.iso disc1-mountpoint disc2-mountpoint
and here's what I got
I: -input-charset not specified, using utf-8 (detected in locale settings)
Using BILBO000.ICO;1 for /bilbo.ico (bilbo.ico)
Using AUTORUN000.INF;1 for /Autorun.inf (Autorun.inf)
genisoimage: Error: '/media/dc/bilbo.ico' and '/media/live/bilbo.ico' have the same Rock Ridge name 'bilbo.ico'.
genisoimage: Error: '/media/dc/Autorun.inf' and '/media/live/Autorun.inf' have the same Rock Ridge name 'Autorun.inf'.
Unable to sort directory
NOTE: multiple source directories have been specified and merged into the root
of the filesystem. Check your program arguments. genisoimage is not tar.
So here's what I'm currently trying right now.
$ cat HobbitCD1.iso > The_Hobbit.iso
$ cat HobbitCD2.iso >> The_Hobbit.iso
Okay, so doing that didn't return any errors, now to see if I can finish the installation with the new ISO file.
Nope it still asks for disk 2. So the real question is how can I force the first disk to unmount so that I can replace it with the second disk?
Last edited by lspci (2012-08-23 22:40:14)progandy wrote:Why don't you try this?
Manually mount the first iso image, begin installation, forcibly unmount old iso, mount new iso, continue installation.
Oh, you can forcibly unmount something?!
(read the manpage for umount)
Oh, whaddaya know, you can.
from umount's manpage
-f Force umount (in case of an unreachable NFS system). (Requires kernel 2.1.116 or later.)
I dunno why I didn't think to check the manpage for umount. Sorry, my bad.
EDIT: Okay, so forcibly unmounting the iso didn't work. I was able to force umount, but I couldn't disassociate the /dev/loop2 from the HobbitCD1.iso file. losetup doesn't seem to support forcing. I think that I better just install this under Windows and then copy and paste the installed files to my external hard drive and then move them onto my laptop from there. =/ Not really what I was looking for, though.
Last edited by lspci (2012-07-30 11:53:58) -
Will my web site created with iweb hosted by fatcow work on icloud?
will my web site created with iweb hosted by fatcow work on icloud?
No. iCloud does not host websites.
Maybe you are looking for
-
Adobe Muse does not list a new system font (otf) I just installed. After trying everything I could think it turned out that I have to open a new admin account and use Muse from there, where it successfully lists the font. How do I solve this problem
-
How do I stop "auto Renewal" purchases?
My daughter has used my iPad and downloaded app game. Now every week I get an automatic $2 taken out of my bank account from iTunes titled " automatic renewal"... How can I stop this from occurring or cancel this?
-
Error--Timed out trying to start process J000.
Hi all, I have a Oracle 9.2 on sun box with 2 node rac. i am getting an erorr in alert log file i.e Timed out trying to start process J001. Tue Feb 17 13:27:30 2009 Timed out trying to start process J000. Tue Feb 17 13:29:39 2009 Timed out trying to
-
Hi We have a infotype 9004, and we needed to add one more field to this. I've already add the file to PS9004 structure and inserted this field in screen. But when I open PA30 this field is disabled to input even though this is an input/output field.
-
Newbie needs InDesign CS5 help: text overflow into new page
Hello... so, I've been using InDesign CS5 to create a document, because it transfers nicely into the pdf format. I had written most of the stuff a couple months ago, am transferring it to InDesign via copy and paste, and then have to go in an "re-d