MDT 2010 Vista cannot finish after joining domain

Hi,
I have a problem with deployment process after joining domain. I am deploying Vista using MDT 2010 with LiteTouch.  Everything works fine. However, deployment process stops after joining domain. I suppose that autologon is disabled/don't work after joining domain and all following steps can't be started.
What is wrong with my configuration or Task Sequence?
Thanks in advance, Jan.

Hi Jan,
Thank you for your post.
As you said that the deployment process stopped after joining domain, may I know if there is any error received? If so, please let me know the details.
Meanwhile, I would like to share the following with you:
Avoiding Legan Notice that breaks MDT autologon
http://blogs.msdn.com/alex_semi/archive/2009/08/28/avoiding-legan-notice-that-breaks-mdt-autologon.aspx
Thanks.
Nicholas Li
TechNet Subscriber Support in forum
Nicholas Li - MSFT

Similar Messages

  • OVM Server takes long time to boot up - gets stuck for minutes after joining domain

    Server takes a long time to reboot. Seems to get stuck for 8-10 minutes every time after joining domain.
    See below extract from /var/log/messages:-
    Feb 1 16:39:49 svrshir441 kernel: OCFS2 1.8.0
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000E5144BF336A244A4 ( 0 1 2 ) 3 nodes
    Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,4) on (node 1, slot 2) with ordered data mode.
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB00000500000328DE591E03F0DB ( 0 1 2 ) 3 nodes
    Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,2) on (node 1, slot 2) with ordered data mode.
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB000005000024F2772BB88DAA6A ( 0 1 2 ) 3 nodes
    Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,5) on (node 1, slot 2) with ordered data mode.
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000B8721C8850D2C515 ( 0 1 2 ) 3 nodes
    Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,1) on (node 1, slot 2) with ordered data mode.
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000EE77A2D3C8C7383B ( 0 1 2 ) 3 nodes
    Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,0) on (node 1, slot 2) with ordered data mode.
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000B96BA1B4B79D765E ( 0 1 2 ) 3 nodes
    Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,3) on (node 1, slot 2) with ordered data mode.
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain ovm ( 0 1 2 ) 3 nodes
    Feb 1 16:47:22 svrshir441 kernel: mpt2sas0: _ctl_BRM_status_show: BRM attribute is only forwarpdrive
    Feb 1 16:47:22 svrshir441 kernel: mpt2sas0: _ctl_host_trace_buffer_show: host_trace_buffer is not registered
    Feb 1 16:47:22 svrshir441 kernel: mpt2sas0: _ctl_host_trace_buffer_size_show: host_trace_buffer is not registered
    Feb 1 16:47:22 svrshir441 kernel: qla2xxx [0000:30:00.0]-1020:7: **** Failed mbx[0]=4006
    No idea why it seems to pause for 8 minutes.

    [2015-02-01 16:38:23 9555] DEBUG (ocfs2:162) cluster debug: {'/sys/kernel/debug/o2dlm': [], '/sys/kernel/debug/o2net': ['connected_n
    odes', 'stats', 'sock_containers', 'send_tracking'], '/sys/kernel/debug/o2hb': ['0004FB0000050000E5144BF336A244A4', 'failed_regions'
    , 'quorum_regions', 'live_regions', 'livenodes'], 'service o2cb status': 'Driver for "configfs": Loaded\nFilesystem "configfs": Moun
    ted\nStack glue driver: Loaded\nStack plugin "o2cb": Loaded\nDriver for "ocfs2_dlmfs": Loaded\nFilesystem "ocfs2_dlmfs": Mounted\nCh
    ecking O2CB cluster "8cd10008859eaf59": Online\n  Heartbeat dead threshold: 61\n  Network idle timeout: 60000\n  Network keepalive d
    elay: 2000\n  Network reconnect delay: 2000\n  Heartbeat mode: Global\nChecking O2CB heartbeat: Active\n  0004FB0000050000E5144BF336
    A244A4 /dev/dm-4\nNodes in O2CB cluster: 0 1 2 \n'}
    [2015-02-01 16:38:23 9555] DEBUG (ocfs2:162) cluster debug: {'/sys/kernel/debug/o2dlm': [], '/sys/kernel/debug/o2net': ['connected_n
    odes', 'stats', 'sock_containers', 'send_tracking'], '/sys/kernel/debug/o2hb': ['0004FB0000050000E5144BF336A244A4', 'failed_regions'
    , 'quorum_regions', 'live_regions', 'livenodes'], 'service o2cb status': 'Driver for "configfs": Loaded\nFilesystem "configfs": Moun
    ted\nStack glue driver: Loaded\nStack plugin "o2cb": Loaded\nDriver for "ocfs2_dlmfs": Loaded\nFilesystem "ocfs2_dlmfs": Mounted\nCh
    ecking O2CB cluster "8cd10008859eaf59": Online\n  Heartbeat dead threshold: 61\n  Network idle timeout: 60000\n  Network keepalive d
    elay: 2000\n  Network reconnect delay: 2000\n  Heartbeat mode: Global\nChecking O2CB heartbeat: Active\n  0004FB0000050000E5144BF336
    A244A4 /dev/dm-4\nNodes in O2CB cluster: 0 1 2 \n'}
    [2015-02-01 16:38:23 9555] DEBUG (ocfs2:270) Trying to mount /dev/mapper/360080e500036115200000b315294458d to /poolfsmnt/0004fb00000
    50000e5144bf336a244a4
    [2015-02-01 16:38:23 9555] DEBUG (ocfs2:295) /dev/mapper/360080e500036115200000b315294458d mounted to /poolfsmnt/0004fb0000050000e51
    44bf336a244a4
    [2015-02-01 16:38:24 10441] INFO (notificationserver:213) NOTIFICATION SERVER STARTED
    [2015-02-01 16:38:24 10443] INFO (remaster:140) REMASTER SERVER STARTED
    [2015-02-01 16:38:24 10444] INFO (monitor:23) MONITOR SERVER STARTED
    [2015-02-01 16:38:24 10447] INFO (ha:89) HA SERVER STARTED
    [2015-02-01 16:38:24 10448] INFO (stats:26) STAT SERVER STARTED
    [2015-02-01 16:38:24 10451] INFO (xmlrpc:307) Oracle VM Agent XMLRPC Server started.
    [2015-02-01 16:38:24 10451] INFO (xmlrpc:316) Oracle VM Server version: {'release': '3.2.8', 'date': '201404161506', 'build': '736'}
    , hostname: svrshir441, ip: 10.90.17.41
    [2015-02-01 16:38:24 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:38:24 10441] DEBUG (notificationserver:239) Connected to manager.
    [2015-02-01 16:38:25 10441] INFO (notificationserver:267) Service started.
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdb-7:0:0:0 (unde
    f:0x20470080e5361152:360080e500036115200000b315294458d)
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdh-9:0:0:0 (acti
    ve:0x20460080e5361152:360080e500036115200000b315294458d)
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdd-7:0:0:2 (unde
    f:0x20470080e5361152:360080e500036115200000b36529447cb)
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdj-9:0:0:2 (acti
    ve:0x20460080e5361152:360080e500036115200000b36529447cb)
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdf-7:0:0:4 (unde
    f:0x20470080e5361152:360080e500036115200000b39529448ba)
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdl-9:0:0:4 (acti
    ve:0x20460080e5361152:360080e500036115200000b39529448ba)
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdc-7:0:0:1 (acti
    ve:0x20470080e5361152:360080e500037683a00000b1652944694)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdi-9:0:0:1 (unde
    f:0x20460080e5361152:360080e500037683a00000b1652944694)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sde-7:0:0:3 (acti
    ve:0x20470080e5361152:360080e500037683a00000b18529448bf)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdk-9:0:0:3 (unde
    f:0x20460080e5361152:360080e500037683a00000b18529448bf)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdg-7:0:0:5 (acti
    ve:0x20470080e5361152:360080e500037683a00000b1a529449ac)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdm-9:0:0:5 (unde
    f:0x20460080e5361152:360080e500037683a00000b1a529449ac)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_DM] dm-5 (360080e5000
    36115200000b39529448ba)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_DM] dm-1 (360080e5000
    36115200000b36529447cb)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_DM] dm-0 (360080e5000
    37683a00000b1652944694)
    [2015-02-01 16:38:27 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_DM] dm-2 (360080e5000
    37683a00000b18529448bf)
    [2015-02-01 16:38:27 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_DM] dm-3 (360080e5000
    37683a00000b1a529449ac)
    [2015-02-01 16:38:27 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_DM] dm-4 (360080e5000
    36115200000b315294458d)
    [2015-02-01 16:38:29 10444] DEBUG (monitor:36) Cluster state changed from [Unknown] to [DLM_Ready]
    [2015-02-01 16:38:29 10444] INFO (notification:47) Notification sent: {CLUSTER} {MONITOR} Cluster state changed from [Unknown] to [D
    LM_Ready]
    [2015-02-01 16:38:29 10441] INFO (notificationserver:139) Sending notification: {CLUSTER} {MONITOR} Cluster state changed from [Unkn
    own] to [DLM_Ready]
    [2015-02-01 16:38:33 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:33 {NETWORK} net : ADD : eth4 (1)
    [2015-02-01 16:38:36 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:36 {NETWORK} net : ADD : eth5 (1)
    [2015-02-01 16:38:39 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:39 {NETWORK} net : ADD : eth6 (0)
    [2015-02-01 16:38:42 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:42 {NETWORK} net : ADD : eth7 (1)
    [2015-02-01 16:38:45 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:45 {NETWORK} net : ADD : eth0 (1)
    [2015-02-01 16:38:48 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:48 {NETWORK} net : ADD : eth1 (1)
    [2015-02-01 16:38:51 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:51 {NETWORK} net : ADD : eth2 (0)
    [2015-02-01 16:38:54 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:54 {NETWORK} net : ADD : eth3 (1)
    [2015-02-01 16:38:57 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:57 {NETWORK} net : ADD : bond0 (1)
    [2015-02-01 16:39:00 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:39:00 {NETWORK} net : ADD : bond1 (1)
    [2015-02-01 16:39:03 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:39:03 {NETWORK} net : ADD : bond1.590 (1)
    [2015-02-01 16:39:06 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:39:06 {NETWORK} net : ADD : bond1.90 (1)
    [2015-02-01 16:40:56 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) None&c=8&s=
    1422808694292&lb=p&t=2&p=%3Ccom.oracle.odof.OdofIdentifier%3E%3Clong%3E943%3C%2Flong%3E%3C%2Fcom.oracle.odof.OdofIdentifier%3E%2Ccom
    pareTo%2Cjava.lang.Object%2CNone%2C5'
    [2015-02-01 16:41:05 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
    90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
    [2015-02-01 16:41:26 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
    90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
    [2015-02-01 16:41:47 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
    90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
    [2015-02-01 16:42:05 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
    90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
    [2015-02-01 16:42:26 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
    90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
    [2015-02-01 16:42:26 10441] INFO (notificationserver:276) Service stopped.
    [2015-02-01 16:42:26 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:42:29 10441] ERROR (notificationserver:244) Error initializing notification server: 'Invalid URL Request (send) https
    ://10.90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1
    767abc'
    [2015-02-01 16:42:45 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:42:59 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:43:05 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:43:25 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:43:32 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:43:45 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:44:02 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:44:05 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:44:25 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:44:32 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:44:46 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:44:53 11242] DEBUG (service:76) call start: discover_server
    [2015-02-01 16:44:54 11242] DEBUG (service:76) call complete: discover_server
    [2015-02-01 16:45:02 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:45:02 10441] DEBUG (notificationserver:239) Connected to manager.
    [2015-02-01 16:45:03 10441] INFO (notificationserver:267) Service started.
    [2015-02-01 16:47:22 11455] DEBUG (service:76) call start: get_api_version
    [2015-02-01 16:47:22 11455] DEBUG (service:76) call complete: get_api_version
    [2015-02-01 16:47:22 11456] DEBUG (service:76) call start: discover_server
    [2015-02-01 16:47:22 11456] DEBUG (service:76) call complete: discover_server
    [2015-02-01 16:47:22 11470] DEBUG (service:76) call start: discover_hardware
    [2015-02-01 16:47:23 11470] DEBUG (service:76) call complete: discover_hardware
    [2015-02-01 16:47:23 11497] DEBUG (service:76) call start: discover_network
    [2015-02-01 16:47:23 11497] DEBUG (service:76) call complete: discover_network
    [2015-02-01 16:47:24 11498] DEBUG (service:76) call start: discover_storage_plugins
    [2015-02-01 16:47:24 11498] DEBUG (service:76) call complete: discover_storage_plugins
    [2015-02-01 16:47:24 11501] DEBUG (service:74) call start: discover_physical_luns('',)
    [2015-02-01 16:47:25 11501] DEBUG (service:76) call complete: discover_physical_luns
    [2015-02-01 16:47:25 11523] DEBUG (service:74) call start: discover_physical_luns('360080e500036115200000b315294458d 360080e50003611
    5200000b36529447cb 360080e500037683a00000b1652944694 360080e500036115200000b39529448ba 360080e500037683a00000b18529448bf 360080e5000
    36115200000b315294458d 360080e500037683a00000b1a529449ac 360080e500036115200000b36529447cb 360080e500037683a00000b1652944694 360080e
    500036115200000b39529448ba 360080e500037683a00000b18529448bf 360080e500037683a00000b1a529449ac',)
    [2015-02-01 16:47:25 11523] DEBUG (service:76) call complete: discover_physical_luns
    [2015-02-01 16:47:26 11545] DEBUG (service:76) call start: discover_repository_db
    [2015-02-01 16:47:26 11545] DEBUG (service:76) call complete: discover_repository_db
    [2015-02-01 16:47:26 11546] DEBUG (service:74) call start: storage_plugin_listMountPoints('oracle.ocfs2.OCFS2.OCFS2Plugin', {'status
    ': '', 'admin_user': '', 'admin_host': '', 'uuid': '0004fb000009000090ee9ab5a5966c67', 'total_sz': 0, 'admin_passwd': '******', 'fre
    e_sz': 0, 'name': '0004fb000009000090ee9ab5a5966c67', 'access_host': '', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': []
    , 'used_sz': 0, 'storage_desc': ''})
    [2015-02-01 16:47:26 11546] INFO (storageplugin:109) storage_plugin_listMountPoints(oracle.ocfs2.OCFS2.OCFS2Plugin)
    [2015-02-01 16:47:27 11546] DEBUG (service:76) call complete: storage_plugin_listMountPoints
    [2015-02-01 16:47:27 11573] DEBUG (service:76) call start: get_yum_config
    [2015-02-01 16:47:27 11573] DEBUG (service:76) call complete: get_yum_config
    [2015-02-01 16:47:27 11574] DEBUG (service:76) call start: discover_cluster
    [2015-02-01 16:47:27 11574] DEBUG (service:76) call complete: discover_cluster
    [2015-02-01 16:48:53 11703] DEBUG (service:76) call start: discover_network
    [2015-02-01 16:48:53 11703] DEBUG (service:76) call complete: discover_network
    [2015-02-01 16:48:53 11704] DEBUG (service:74) async call start: start_vm('0004fb00000300001e5b01d4a4cb6426', '0004fb0000060000eff93
    af0676e8c83')
    [2015-02-01 16:48:53 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-eff9-3af0676e8c83 {START
    [2015-02-01 16:48:54 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-eff9-3af0676e8c83 {VNC}
    5900
    [2015-02-01 16:48:54 11706] DEBUG (base:269) async call complete: func: start_vm pid: 11706 status: 0 output:
    [2015-02-01 16:48:54 11706] INFO (notification:47) Notification sent: {ASYNC_PROC} exit PID 11706
    [2015-02-01 16:48:54 10441] INFO (notificationserver:139) Sending notification: {ASYNC_PROC} exit PID 11706
    [2015-02-01 16:48:55 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000eff93af0676e8c83 {SSLVNC} 6
    900
    [2015-02-01 16:48:55 11958] DEBUG (service:74) call start: configure_vm_ha('0004fb00000300001e5b01d4a4cb6426', '0004fb0000060000eff9
    3af0676e8c83', True)
    [2015-02-01 16:48:56 11958] DEBUG (service:76) call complete: configure_vm_ha
    [2015-02-01 16:48:56 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000eff93af0676e8c83 {SSLTTY} 7
    900
    [2015-02-01 16:50:01 12075] DEBUG (service:76) call start: discover_network
    [2015-02-01 16:50:01 12075] DEBUG (service:76) call complete: discover_network
    [2015-02-01 16:50:01 12076] DEBUG (service:74) async call start: start_vm('0004fb0000030000ba5b6d02faa88c44', '0004fb0000060000fd7d7
    ad27e9d7b63')
    [2015-02-01 16:50:02 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {START
    [2015-02-01 16:50:02 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {VNC}
    5901
    [2015-02-01 16:50:02 12078] DEBUG (base:269) async call complete: func: start_vm pid: 12078 status: 0 output:
    [2015-02-01 16:50:02 12078] INFO (notification:47) Notification sent: {ASYNC_PROC} exit PID 12078
    [2015-02-01 16:50:03 10441] INFO (notificationserver:139) Sending notification: {ASYNC_PROC} exit PID 12078
    [2015-02-01 16:50:03 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000fd7d7ad27e9d7b63 {SSLVNC} 6
    901
    [2015-02-01 16:50:04 12516] DEBUG (service:74) call start: configure_vm_ha('0004fb0000030000ba5b6d02faa88c44', '0004fb0000060000fd7d
    7ad27e9d7b63', True)
    [2015-02-01 16:50:04 12516] DEBUG (service:76) call complete: configure_vm_ha
    [2015-02-01 16:50:04 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000fd7d7ad27e9d7b63 {SSLTTY} 7
    902
    [2015-02-01 16:50:54 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {VMAPI
    } VMAPIEvent {"VMAPIEvent":{"severity":5,"subsystem":"OVMSvcSS","process":"OVMSvc","type":"system","payload":{"type":"alive","alive"
    :{"hostname":"GIS-DB-SVR1","domainName":"gloscc.gov.uk","osType":"Windows","osVersion":"Windows Server 2008 R2 Service Pack 1","kern
    elVersion":"6.1.7601.18700","arch":"AMD64","guestType":"PVHVM","guestDriverVersion":"3.2.2.0","vmapiVersion":"100"}}}}
    [2015-02-01 16:50:54 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {VMAPI
    } VMAPIEvent {"VMAPIEvent":{"severity":5,"subsystem":"OVMSvcSS","process":"OVMSvc","type":"system","payload":{"type":"IPChange","IPC
    hange":{"intrface":"Oracle VM Virtual Ethernet Adapter","mac":"0021f6000001","ipv4info":{"ipinfo":[{"address":"10.90.0.66","netmask"
    :"255.255.255.0","gateway":"","mtu":1500,"speed":1000000000}]},"ipv6info":{"ipinfo":[{"address":"fe80::993f:d5f4:599d:fa4%14","netma
    sk":"255.255.255.0","gateway":"","mtu":1500,"speed":1000000000}]}}}}}

  • Microsoft Store Breaks After Joining Domain (2008)

    After joining a Windows 8 Pro Tablet to domain, store apps are no longer working.
    This is important to us for two reasons :
    1) Users must be able to use OneNote and Photo Apps
    2) Users must be able to access Domain shares and have access to the same files as his regular workstation
    All of this regardless of what user logs in.
    Currently active COMPUTER GPO :
    Enable Offline Files
    Enable Remote Desktop
    Local Admin Group to Domain Users
    NTP Client configuration
    Trusted Zones (Local Intranet/Shared Paths)
    Currently Active USER GPO :
    Map network Drives
    Create Folder Structure at logo on server (VBS)
    Folder Redirection (Desktop and Documents to Server. Favorites, Music, pictures and Video follow Documents)
    I've tried a few tricks found on google and technet, but I seem to only regain partial and temporary access to the store. Apps will open and close immediately (Store/Camera for example).
    Any suggestions would be appreciated and thank your for your time!

    Hi,
    If this issue occurs just after joining domain, you need check this policy:
    Computer Configuration/Windows Components/Store/Turn off the Store application
    If it is not this case, we can re-register Windows Store for a test:
    Fix Store App in Windows 8.1
    http://blogs.msdn.com/b/notime/archive/2013/10/18/fix-store-app-in-windows-8-1.aspx
    Alex Zhao
    TechNet Community Support

  • Network Category not set to 'DomainAuthenticated' after joining domain.

    I have a several hundred Windows 2012 servers that do not update thier network category to 'DomainAuthenticated' after being joined to a domain.  All my networks are unidentified and thus set to public.  I can run the following command and change
    them to private, but all documentation says that it should auto-magically change to DomainAuthenticated after joining a domain.  Does anyone have a solution?
    Get-NetConnectionProfile
    |
    where {$_.NetworkCategory
    -eq
    "Public"}
    |
    Set-NetConnectionProfile
    -NetworkCategory
    Private

    Hi,
    If the server is domain joined, when it starts to detect the network location, the machine will contact a DC via port 389. If this detection successful, it will get the domain profile. And we cannot change
    it. If the domain was not found or process failed, NLA will let you to determine which firewall profile will be used, private or public.
    For more information about Network Location Awareness, you may refer to the following article. It also applies to Windows 2012.
    Network Location Awareness (NLA) and how it relates to Windows Firewall Profiles
    http://blogs.technet.com/b/networking/archive/2010/09/08/network-location-awareness-nla-and-how-it-relates-to-windows-firewall-profiles.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • OS pre-instaled CM12 Client, but it can not automatically find site after joining Domain

    Background:
    we update sccm 2007 to sccm 2012 r2
    For New PC, the OS pre-installed with our image by PC Vendor. The image has sccm 2012 client. So when users get the new pc, we only need to join the domain.
    After joining the domain, 2012 client will never automatic locate the site code base on AD. 
    I do some testing.
    Install client in the domain pc with parameter SMSSITECODE=AUTO, the site code can be located
    Install client in the workgroup pc firstly, the join the domain. Client will never automatic locate the site code base on AD
    But If I  click Find Site in the Advanced tab of the Configuration Manager Properties in
    the Control Panel. The site code can be located.

    I'm going to guess you're running 2007 and 2012 side by side, in which case you need to look at your boundary groups.  In 2007 you simply had boundaries, in 2012 if you don't make boundary groups and assign boundaries and site site assignment to said
    group nothing will happen.
    If you have upgraded your infrastructure completely to 2012 but haven't upgraded all of your clients yet ... what you should be seeing is the opposite:  2007 clients wont check into 2012 unless you enable automatic client upgrade.  Then there's
    if you have overlapping site codes between the two systems.
    Better detail See:
    https://technet.microsoft.com/en-us/library/gg682060.aspx
    Assignment scenario
    Assignment outcome
    You have used automatic site assignment and your System Center 2012 Configuration Manager boundaries overlap with Configuration Manager 2007 boundaries.
    The client automatically tries to find a System Center 2012 Configuration Manager site.
    The client first checks Active Directory Domain Services and if it finds a System Center 2012 Configuration Manager site published, site assignment succeeds. If this is not successful
    (for example, the System Center 2012 Configuration Manager sites is not published or the computer is a workgroup client), the client then checks for site information from its assigned management point.
    Note
    You can assign a management point to the client during client installation by using the Client.msi property SMSMP=<server_name>.
    If both these methods fail, site assignment fails and you must manually assign the client.
    You have assigned the System Center 2012 Configuration Manager client by using a specific site code rather than automatic site assignment, and mistakenly specified a site code for a Configuration
    Manager 2007 site.
    Site assignment fails and you must manually reassign the client to a System Center 2012 Configuration Manage

  • Cannot Replicate after upgrading domain functional level

    Hello, 
    Parent and child domain. Parent domain (forest) still in domain functional level 2003. However, child domain i just updated to domain functional level 2008 R2. Now replication is not working. I believe the issue is dns, but i do not know what could be different
    the names have not changed? This is a two way transitive trust between domains.
    Frequent messages from dcdiag dns, are 
    no DNS RPC connectivity (although i have tried restarting dcom, netbios and frs)
    Also in event viewer many 13508 errors
    Any help is greatly appreciated thank you.

    Have you restarted the DCs after that you raised the functional level? The password of the krbtgt account is reset when the DFL is raised from 2003 -> and sometimes the DCs need to be restarted for the authentication to succeed up to the root.
    If you from a Windows Server 2008 R2 DC run dcdiag /test:dns /E dose it report any errors?
    Enfo Zipper
    Christoffer Andersson – Principal Advisor
    http://blogs.chrisse.se - Directory Services Blog

  • Firefox removed all my bookmarks after joining domain

    my system administrator joined my computer on domain and all my bookmarks were gone. How to get them back?
    Thanks

    If you are experiencing problems with Firefox, instead of trying to find the cause of the problem and fix it, sometimes it is easier to create a new profile and copy it over your data importantes.La Reset Firefox feature will do it for you automatically.

  • MDT TS not joining domain

    Hi,
    I'm experiencing something weird. my MDT 2010 U1 TS doesn't join HP Compaq 6200 & ProBook 6460b to the domain when I deploy Win 7 x64. It works for x86.
    I'm using drivers packages and my WinPE have all drivers (same version x86 and x64). I didn't enter my domain informations in the CS.ini, I only use the "Apply Network Settings step for the domain. It's configured correctly with the SCCM account to use to join
    the domain. My computers account are created manually in a OU before do the OSD (not a container). I did F8 during the TS and the computer have an IP and I'm able to ping it all the time during
    Here is the log in advertisement status in SCCM:
    Severity    Type    Site code    Date / Time    System    Component    Message ID    Description
    Information    Milestone    CTX    07/06/2012 9:30:05 AM    COMPVALERIE    Task Sequence Engine    11134    The task sequence execution engine successfully
    completed the action (Apply Network Settings) in the group (PostInstall) with exit code 0  Action output: ==============================[ OSDNetSettings.exe ]=========================== Command line: "osdnetsettings.exe" configure Setting %SystemRoot%
    to "D:\Windows" Loading existing answer file "D:\Windows\panther\unattend\unattend.xml" Configuring global network settings Join type: 0 Joining domain: sa.domain.com Getting namespace "Microsoft-Windows-UnattendedJoin" for architecture "amd64" DNS domain: 
    DNS domain search order:  IP filter sec enabled: false No adapters found in environment.  Performing global configuration only. Writing configuration information to D:\Windows\panther\unattend\unattend.xml Successfully saved configuration information
    to D:\Windows\panther\unattend\unattend.xml Configuring "OSDNetSettings.exe finalize" to run on first boot OSDNetSettings finished: 0x00000000.
    For some others computers able to join the domain, I have the same results in the advertisment status log file.
    Here is some log from the BDD.log:
    Loaded D:\Windows\panther\unattend\unattend.xml    zticonfigure    07/06/2012 9:30:06 AM    0 (0x0000)
    Merge specified, but D:\_SMSTaskSequence\WDPackage\Control\\Unattend.xml wasn't found, unable to merge    zticonfigure    07/06/2012 9:30:06 AM    0 (0x0000)
    Property UPGRADE is now = false    zticonfigure    07/06/2012 9:30:06 AM    0 (0x0000)
    Property ComputerName is now = COMPVALERIE    zticonfigure    07/06/2012 9:30:06 AM    0 (0x0000)
    No value found for FullName    zticonfigure    07/06/2012 9:30:06 AM    0 (0x0000)
    No value found for OrgName    zticonfigure    07/06/2012 9:30:06 AM    0 (0x0000)
    No value found for ProductKey    zticonfigure    07/06/2012 9:30:06 AM    0 (0x0000)
    No value found for JoinDomain    zticonfigure    07/06/2012 9:30:06 AM    0 (0x0000)
    No value found for MachineObjectOU    zticonfigure    07/06/2012 9:30:06 AM    0 (0x0000)
    No value found for JoinWorkgroup    zticonfigure    07/06/2012 9:30:06 AM    0 (0x0000)
    No value found for DomainAdmin    zticonfigure    07/06/2012 9:30:06 AM    0 (0x0000)
    Here is the netsetup.log file:
    06/01/2012 09:53:29:714 -----------------------------------------------------------------
    06/01/2012 09:53:29:714 NetpDoDomainJoin
    06/01/2012 09:53:29:714 NetpMachineValidToJoin: 'COMPVALERIE'
    06/01/2012 09:53:29:714     OS Version: 6.1
    06/01/2012 09:53:29:714     Build number: 7601 (7601.win7sp1_gdr.110622-1506)
    06/01/2012 09:53:29:714     ServicePack: Service Pack 1
    06/01/2012 09:53:29:807     SKU: Windows 7 Enterprise
    06/01/2012 09:53:29:807 NetpGetLsaPrimaryDomain: status: 0x0
    06/01/2012 09:53:29:807 NetpMachineValidToJoin: status: 0x0
    06/01/2012 09:53:29:807 NetpJoinWorkgroup: joining computer 'COMPVALERIE' to workgroup 'WORKGROUP'
    06/01/2012 09:53:29:807 NetpValidateName: checking to see if 'WORKGROUP' is valid as type 2 name
    06/01/2012 09:53:29:838 NetpCheckNetBiosNameNotInUse for 'WORKGROUP' [ Workgroup as MACHINE]  returned 0x0
    06/01/2012 09:53:29:838 NetpValidateName: name 'WORKGROUP' is valid for type 2
    06/01/2012 09:53:29:979 NetpSetLsaPrimaryDomain: for 'WORKGROUP' status: 0x0
    06/01/2012 09:53:30:057 NetpJoinWorkgroup: status:  0x0
    06/01/2012 09:53:30:057 NetpDoDomainJoin: status: 0x0
    Now the thing weird is the smsts.log file:
    Found network adapter "Bluetooth Device (Personal Area Network)" with IP Address 0.0.0.0.    TSMBootstrap    07/06/2012 9:45:23 AM    2292 (0x08F4)
    Found network adapter "Intel(R) Centrino(R) Advanced-N 6205" with IP Address 0.0.0.0.    TSMBootstrap    07/06/2012 9:45:23 AM    2292 (0x08F4)
    Found network adapter "Intel(R) 82579LM Gigabit Network Connection" with IP Address 0.0.0.0.    TSMBootstrap    07/06/2012 9:45:23 AM    2292 (0x08F4)
    During the TS a I did F8 and it get a IP address and I'm able to ping the servers but why in the log I don't see an IP ? What do I need to fix this ?
    And Why the netsetup.log file see WORKGROUP instead of the domain ?

    Hi,
    Have been struggling with this is issue for months! Have only just this minute got it to work. Thought I would share how I got it to work, just in case other people may find it helpful.
    We here use SCCM 2012 R2, and deploy images using SCCM Task Sequences. For months now we have not been able to get our HP Probook 6560b's to finish installing and join to the domain. The task sequence would finish and show a Windows 7 login screen for a
    local account.
    Having tried a matter of many different ways it has worked using the driver, as mentioned above by Olivierdsm2 and MattGrimley.
    First I downloaded the HP Driver pack for the Probook 6560b. I made them all into folders corresponding to Driver Category, Audio, Chipset, Network. Making sure any EXE's are unzipped to show raw INF form if applicable. I then made sure the Network driver
    was removed and replaced with the one mentioned by Olivierdsm2 and MattGrimley. The Intel(R) 82579LM Gigabit Network Connection v11.15.16.0.
    I created a new Virtual Machine on our Hyper-V server, with a clean Windows 7 image. I installed all software required for the image such as Office 2010, and then completed Windows updates. I then used Sysprep to generalize the image and make it OOBE. I
    added the WinPE iso to the CD Tray in Hyper-V and as the VM shut down it booted into WinPE. I then used DiskPart to list the volumes, just so I could see which Drive letter corresponds to each partition, as I will need these details for next command lines.
    I then exited Diskpart and entered into Image X to capture the WIM. I captured the WIM to local drive and then copied over to my computer where I used DISM to mount the WIM and then to apply the HP drivers from the folder location mentioned above. Making
    sure to use the Recurse switch so it adds drivers from within the folders. It imported successfully and then commited the changes so the WIM was unmounted.
    I then copied the WIM to my SCCM server and imported it to the Operating System Images section. making sure I distributed the content. I added the WIM to my Task Sequence and named it so it was specific to the Probook 6560b. I changed the task sequence by
    deleting auto install or apply drivers, as these are now in the image itself. So I will only install this task sequence to Probook 6560b's.
    Having done all the steps I then made the task sequence available to PXE and Media and ran the installation on the Probook laptop, and it actually FAILED!!
    The network driver didn't actually install from DISM. Logged into Laptop and on Device Manager the network driver wasn't installed. I then installed the Network Driver "The Intel(R) 82579LM Gigabit Network Connection v11.15.16.0 " manually from the laptop
    and it then installed ok. I followed the same steps above to Sysprep, and capture image with ImageX. Then once I added the image to SCCM and to the task sequence, I ran the installing again to the laptop and IT WORKED!!! The laptop came on, and it was joined
    to the domain!
    I did this from Hyper-V as I read that this will create an image that doesn't have too many drivers from the reference image device. I don't know if this still would work capturing straight from the laptop itself, but when I did try this before I logged
    in locally to check the driver version and it was always an up to date driver, which must be why it never worked before. I think our drivers and driver packages from SCCM must have the newer drivers as to why this didn't work from there. But I'm just happy
    this now works and we can save time not having to do things manually.
    Hopefully this may help anyone with similar issue who is in difficulty with this. Would never have got it to work if I hadn't come across this forum entry. Even if it is for MDT. Could not find any other site that helped with this issue.
    thanks,
    Don

  • After joining computer to the windows doamin i cannot change password for Mac for the domain user

    After joining computer to the windows doamin i cannot change password for Mac for the domain user

    Hi,
    Did this problem occures after installed Windows 8.1 Update 1? Here is another thread that had similar problem. Also I don't think this problem relate with Domain. Please refer to the solution of the thread below for reference, If there is any
    progress, please let us know.
    http://social.technet.microsoft.com/Forums/en-US/08993680-b6f5-4e80-b031-d32fec97d682/not-able-to-right-click-on-tiles-after-81-update?forum=w8itproge
    Roger Lu
    TechNet Community Support

  • Windows live mail having problum after joining in domain examples incoming is good but sent or outgoing is not there and also send mails are not exporting at the time of live mail exporting time?

    windows live mail having problem after joining in domain examples incoming is good but sent or outgoing is not there and also send mails are not exporting at the time of live mail exporting time?

    This is not usually related to AD issues, but it may be more of a DNS issue. I posted a request in your other thread to post an unedited ipconfig /all of the DC and of the client.
    This may help use diagnose this issue and your other thread's printer issues.
    Thank you,
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • MDT : Failed to join domain

    Hello,
    I am receiving the below error bdd.log and after that zero touch installation is failing.
    Error in the logs : “Failed to join domain. The account may not have permission The specified network name is no longer available. (Error: 80070040; Source: Windows)”
    Please let me know how to solve it
    Regards,
    Boopathi S

    Hi Boopathi,
    As per the description, I understand that it's an issue about Microsoft Deployment Toolkit.
    The error message above indicates that the network resource that you specified was either temporarily taken offline or is no longer available. It is possible that:
    The share at the server might have been temporarily deleted;
    The server that shared the resource might have been turned off;
    The permissions might have been changed.
    You might want to check above aspects. Also, please note that this is the forum to discuss questions and feedback for
    Microsoft Office client. Since your query is directly related to
    Microsoft Deployment Toolkit, I would suggest you to post in the forum of
    Solution Accelerators>Microsoft Deployment Toolkit, where you can get more experienced responses:
    https://social.technet.microsoft.com/Forums/en-US/home?forum=mdt
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • MDT 2013, D: Wim not applying after update from MDT 2010 to 2013

    Updated MDT from MDT 2010 Update 1 to MDT 2012 Update 1, uninstalled WAIK, Installed MDT 2013, and then ADK, Upgraded all Deployment shares along the way, and now the extra drive (D:) Wim will not apply to Drive, i have tried two different ways to handle
    the said action, the first was using the Unattend.xml, adding the  DataImage Action, the other was using an Imagex command from the MDT task sequence. neither is applying the Wim, before the upgrade this worked. has any one else had this issue? 
    Thank you, 
    Dane Zittritsch
    Thinix Support Manager

    I moved from MDT 2010 to MDT 2013 and its just not working, i have tried a few different methods, the old way we used the
    Unattend.xml and placed a install order and that always worked, but now i am trying to use Imagex and its not applying the wim, when i get in the image the D:\ (Second Drive) is missing files.  Now here is the weird part, if i re-run the task sequence
    the D WIM is applied, but that's counter productive. i will apply my TS.xml information. 
    Ts.xml
    <?xml version="1.0"?>
       -<sequence description="A complete task sequence for deploying a client operating system" name="Standard Client Task Sequence" version="3.00"> -<globalVarList> <variable name="OSGUID" property="OSGUID">{52bb4035-96e5-46f3-9d17-3d2a363895c3}</variable>
          <variable name="DestinationDisk" property="DestinationDisk">0</variable>
          <variable name="DestinationPartition" property="DestinationPartition">2</variable>
         <variable name="DestinationOSVariable" property="DestinationOSVariable">OSDisk</variable>
         <variable name="DestinationOSRefresh" property="DestinationOSRefresh"/>
         <variable name="DestinationOSDriveLetter" property="DestinationOSDriveLetter"/>
         <variable name="DestinationOSInstallType" property="DestinationOSInstallType">ByDiskPartition</variable>
    </globalVarList>
    -<group description="Initialize the TS environment" name="Initialization" expand="true" continueOnError="false" disable="false">
    - <step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly"
    property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action> </step> </group> -<group description="Test"
    name="Validation" expand="true" continueOnError="false" disable="false"> -<condition> -<operator type="or"> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable> <variable
    name="Operator">equals</variable> <variable name="Value">VALIDATION</variable> </expression> </operator> </condition> -<step description="" name="Validate" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="BDD_Validate"> -<defaultVarList> <variable name="ImageSize" property="ImageSize">0</variable> <variable name="ImageProcessorSpeed" property="ImageProcessorSpeed">800</variable> <variable name="ImageMemory" property="ImageMemory">768</variable>
    <variable name="VerifyOS" property="VerifyOS">CLIENT</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIValidate.wsf"</action> </step> -<step description="" name="Check BIOS" continueOnError="false" disable="false"
    startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIBIOSCheck.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    -<step description="" name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> </group> -<group description="" name="State Capture" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
    name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">STATECAPTURE</variable> </expression> </condition> -<step description="" name="Next Phase" continueOnError="false"
    disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    </group> -<group description="" name="Preinstall" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable>
    <variable name="Operator">equals</variable> <variable name="Value">PREINSTALL</variable> </expression> </condition> -<step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action>
    </step> -<group description="" name="New Computer only" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DeploymentType</variable>
    <variable name="Operator">equals</variable> <variable name="Value">NEWCOMPUTER</variable> </expression> </condition> -<step description="" name="Validate" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="BDD_Validate"> -<defaultVarList> <variable name="ImageSize" property="ImageSize">0</variable> <variable name="ImageProcessorSpeed" property="ImageProcessorSpeed">800</variable> <variable name="ImageMemory" property="ImageMemory">768</variable>
    <variable name="VerifyOS" property="VerifyOS">CLIENT</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIValidate.wsf"</action> </step> -<step description="" name="Format and Partition Disk" continueOnError="false"
    disable="true" successCodeList="0 3010" type="SMS_TaskSequence_PartitionDiskAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="OSDDiskIndex" property="DiskIndex">0</variable> <variable name="DONotCreateExtraPartition"
    property="DONotCreateExtraPartition"/> <variable name="OSDPartitions0Type" property="Partitions0Type">Primary</variable> <variable name="OSDPartitions0FileSystem" property="Partitions0FileSystem">NTFS</variable> <variable name="OSDPartitions0Bootable"
    property="Partitions0Bootable">True</variable> <variable name="OSDPartitions0QuickFormat" property="Partitions0QuickFormat">True</variable> <variable name="OSDPartitions0VolumeName" property="Partitions0VolumeName">OSDisk</variable>
    <variable name="OSDPartitions0Size" property="Partitions0Size">100</variable> <variable name="OSDPartitions0SizeUnits" property="Partitions0SizeUnits">%</variable> <variable name="OSDPartitions0VolumeLetterVariable" property="Partitions0VolumeLetterVariable">OSDisk</variable>
    <variable name="OSDPartitions" property="Partitions">1</variable> <variable name="OSDPartitionStyle" property="PartitionStyle">MBR</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDiskpart.wsf"</action>
    </step> -<step description="You can change the size of the partition(s) in the \Scripts\WinRE\DiskConfig.txt file. Make sure your partition is large enough to hold the recovery image if you install alot of software. Current configuration is 160GB
    for recovery, 60 for OS, 10 for scratch" name="Format and Partition Disk [Custom]" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable
    name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010 BETA\Configure-HDD.cmd"</action> </step> -<step
    description="" name="Copy scripts" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTICopyScripts.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> </group> -<step description="" name="Configure" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIConfigure.wsf"</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Inject Drivers" continueOnError="false" disable="false" successCodeList="0 3010" type="BDD_InjectDrivers"
    runIn="WinPEandFullOS"> -<defaultVarList> <variable name="DriverSelectionProfile" property="DriverSelectionProfile">Dell OptiPlex 790</variable> <variable name="DriverInjectionMode" property="DriverInjectionMode">ALL</variable>
    </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action> </step> -<step description="" name="Apply Patches" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_InstallUpdatesOffline">
    <action>cscript.exe "%SCRIPTROOT%\ZTIPatches.wsf"</action> -<defaultVarList> <variable name="PackageSelectionProfile" property="PackageSelectionProfile">All Packages</variable> </defaultVarList> </step> -<step description=""
    name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> </group> -<group description="" name="Install" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
    name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">INSTALL</variable> </expression> </condition> -<step description="" name="[Custom] Apply D Wim " continueOnError="false"
    disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> -<step description="" name="Install Operating System" continueOnError="false" disable="false" successCodeList="0 3010" type="BDD_InstallOS" runIn="WinPEandFullOS">
    -<defaultVarList> <variable name="OSGUID" property="OSGUID">{52bb4035-96e5-46f3-9d17-3d2a363895c3}</variable> <variable name="DestinationDisk" property="DestinationDisk">0</variable> <variable name="DestinationPartition" property="DestinationPartition">2</variable>
    <variable name="DestinationOSDriveLetter" property="DestinationOSDriveLetter"/> <variable name="DestinationOSVariable" property="DestinationOSVariable">OSDisk</variable> <variable name="DestinationOSRefresh" property="DestinationOSRefresh"/>
    <variable name="DestinationOSInstallType" property="DestinationOSInstallType">ByDiskPartition</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\LTIApply.wsf"</action> </step> -<step description="" name="Restart
    computer" continueOnError="false" disable="false" successCodeList="0 3010" type="SMS_TaskSequence_RebootAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="SMSRebootMessage" property="Message"/> <variable name="SMSRebootTimeout"
    property="MessageTimeout">60</variable> <variable name="SMSRebootTarget" property="Target"/> </defaultVarList> <action>smsboot.exe /target:WinPE</action> </step> -<step description="" name="Next Phase" continueOnError="false"
    disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    </group> -<group description="" name="Postinstall" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable>
    <variable name="Operator">equals</variable> <variable name="Value">POSTINSTALL</variable> </expression> </condition> -<step description="" name="Copy Scripts" continueOnError="false" disable="true" startIn="" successCodeList="0
    3010"> <action>cscript.exe "%SCRIPTROOT%\LTICopyScripts.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
    <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Configure"
    continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIConfigure.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable
    name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> -<step description="Applies the D: wim to System " name="Apply Scratch Drive" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS">
    -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable
    name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"\\thinix-dev1\navyImage$\Tools\x86\imagex.exe" /apply
    "\\thinix-dev1\navyImage$\Operating Systems\navycnic-gen_20131226100000\navycnic-gen_20131226100000_ddrive.wim" 1 D:\</action> </step> -<step description="" name="Inject Drivers" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIdrivers.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
    <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<group description="" name="Custom
    Tasks" expand="true" continueOnError="false" disable="false"> -<step description="Makes sure there is no Boot Config files on C drive and changes them to R drive:" name="Recovery Partition" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\Re-assign
    DriveLetter.cmd"</action> </step> -<step description="" name="[Custom] Apply D Wim " continueOnError="false" disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList>
    <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> -<step description=""
    name="[Custom] TDRBCD" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable
    name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\TDRBCD.exe"</action> </step> -<step description="" name="[Custom] Apply D Wim " continueOnError="false"
    disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> </group> -<step description="" name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Set Phase" continueOnError="false" disable="false" successCodeList="0
    3010" type="SMS_TaskSequence_SetVariableAction"> -<defaultVarList> <variable name="VariableName" property="VariableName">PHASE</variable> <variable name="VariableValue" property="VariableValue">STATERESTORE</variable> </defaultVarList>
    <action>cscript.exe "%SCRIPTROOT%\ZTISetVariable.wsf"</action> </step> </group> -<group description="" name="State Restore" expand="false" continueOnError="false" disable="true"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression">
    <variable name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">STATERESTORE</variable> </expression> </condition> -<step description="" name="Gather local only"
    continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/>
    </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action> </step> -<step description="" name="Post-Apply Cleanup" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\LTIApply.wsf" /post</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Recover From Domain " continueOnError="false" disable="false"
    successCodeList="0 3010" type="BDD_RecoverDomainJoin" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="DomainErrorRecovery" property="DomainErrorRecovery">Auto</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDomainJoin.wsf"
    </action> </step> -<step description="" name="Tattoo" continueOnError="true" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTITatoo.wsf"</action> -<defaultVarList> <variable name="RunAsUser"
    property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile"
    property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Opt In to CEIP and WER" continueOnError="true" disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIOptIn.wsf"
    /CEIP:YES /WER:YES</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Windows Update (Pre-Application Installation)" continueOnError="true"
    disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIWindowsUpdate.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    -<step description="" name="Install Applications" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_InstallApplication"> <action>cscript.exe "%SCRIPTROOT%\ZTIApplications.wsf"</action> -<defaultVarList>
    <variable name="ApplicationGUID" property="ApplicationGUID"/> <variable name="ApplicationSuccessCodes" property="ApplicationSuccessCodes">0 3010</variable> </defaultVarList> </step> -<step description="" name="Windows Update
    (Post-Application Installation)" continueOnError="true" disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIWindowsUpdate.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> <group description="" name="Custom Tasks" expand="true" continueOnError="false" disable="false"/> -<step description="" name="Enable BitLocker" continueOnError="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_EnableBitLockerAction">
    <action>cscript.exe "%SCRIPTROOT%\ZTIBde.wsf"</action> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">BdeInstallSuppress</variable> <variable name="Operator">notEquals</variable>
    <variable name="Value">YES</variable> </expression> </condition> -<defaultVarList> <variable name="OSDBitLockerTargetDrive" property="BdeTargetDriveLetter"/> <variable name="OSDBitLockerMode" property="BdeInstall">TPM</variable>
    <variable name="OSDBitLockerStartupKeyDrive" property="BdeKeyLocation"/> <variable name="OSDBitLockerCreateRecoveryPassword" property="BdeRecoveryPassword">AD</variable> <variable name="OSDBitLockerWaitForEncryption" property="WaitForEncryption">false</variable>
    </defaultVarList> </step> -<step description="" name="Restore User State" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIUserState.wsf" /restore</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Restore Groups" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\ZTIGroups.wsf" /restore</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable
    name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Apply Local GPO Package"
    continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIApplyGPOPack.wsf"</action> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
    name="Variable">ApplyGPOPack</variable> <variable name="Operator">notEquals</variable> <variable name="Value">NO</variable> </expression> </condition> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> -<group description="" name="Imaging" expand="false" continueOnError="false" disable="false"> <action/> -<group description="" name="Prepare Only" expand="false" continueOnError="false" disable="false">
    -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">PREPARE</variable>
    </expression> </condition> -<step description="" name="Copy Sysprep files" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> </group> -<group description="" name="Sysprep Only" expand="false" continueOnError="false" disable="false"> -<condition>
    -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">SYSPREP</variable> </expression>
    </condition> -<step description="" name="Add mass storage drivers to sysprep.inf for XP and 2003" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action>
    -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Execute Sysprep" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> </group> -<group description="" name="Capture Image" expand="false" continueOnError="false"
    disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">YES</variable>
    </expression> </condition> -<step description="" name="Apply Windows PE" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTIApply.wsf" /PE /STAGE</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Add mass storage drivers to sysprep.inf for XP and 2003" continueOnError="false" disable="false" startIn=""
    successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
    <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Execute
    Sysprep" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> -<step description="" name="Apply Windows PE (BCD)" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%_SMSTSMDataPath%\Scripts\LTIApply.wsf" /PE /BCD</action>
    -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">ImageBuild</variable> <variable name="Operator">greaterEqual</variable> <variable name="Value">6</variable>
    </expression> </condition> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Restart computer" continueOnError="false" disable="false"
    successCodeList="0 3010" type="SMS_TaskSequence_RebootAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="Message" property="Message"/> <variable name="MessageTimeout" property="MessageTimeout">60</variable> <variable
    name="Target" property="Target"/> </defaultVarList> <action>smsboot.exe /target:WinPE</action> </step> -<step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"
    type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action>
    </step> -<step description="" name="Create WIM" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIBackup.wsf"</action> -<defaultVarList> <variable name="RunAsUser"
    property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile"
    property="LoadProfile">false</variable> </defaultVarList> </step> </group> </group> </group> </sequence>

  • MDT 2010 - USB 3.0 issue after OS Install and Inject Drivers steps

    Hello,
    I'm using MDT 2010 and I'm booting and image PCs from a USB drive. On some newer systems (eg: Latitude El530) I have issues when I use the USB 3 ports (if media is connected to USB 2 port, everuthing is fine). The systes recognizes the USB stick and I can
    start the Task Sequence just fine. I pass the Install OS step and Inject Drivers step, but after the first reboot, I get the prompt to insert the media to continue the deployment. This happens only if the stick is connected to the USB 3.0 ports. If I
    check Device Manager, I see the USB device withouth driver. The drivers are already on the USB stick...I puled them from FileRepository from an updated system with all the drivers. Is anyone else having similar issues? I see other people have USB 3 issues,
    but mostlly to start the deployment from it, or at partitioning...I don't have that issue. My issue starts after the OS is installed.
    Any sugestion is appreciated...Thank you...
    aburica

    You should be able to do this.  nVidia Optimus video drivers have the same issue.  How we solved this
    We create selection profiles for each make and model
    We inject every single driver in profile for each make and model
    The Optimus driver then gets installed because it is local to the machine already.
    Why it didn't work before is the child device never gets detected during the PNP enum that happens when you have 'Install only matching drivers from the selection profile' so never ends up in the local driver store.
    P.S. We ONLY have the drivers that install imported into each make model folder.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
    How to ask a question that is fixable.

  • Microsoft Updates after Windows 7 Deployment using MDT 2010 Update 1

    Hello,
    After I deploy Windows 7 using MDT 2010 Update 1, i'm prompted to download and install updates. Updates which were installed prior to the capture process. During the capture process, does something reset Windows Update and makes it think the updates were
    not installed?
    My process of building a custom image is as follows:
    1. PXE boot and kick-off a build task sequence (install OS + drivers + soe applications). (protectmypc = 3 in unattend.xml)
    2. Download and install all Microsoft Updates, configure the OS, configure third-party applications.
    3. Map a network drive to my deployment share, run litetouch.vbs and kick-off a capture task sequence.
    4. PXE boot and kick-off a deployment task sequence. (copy profile = true, protectmypc = 1 in unattend.xml)

    I'm getting updates but they are new updates. We have updates turned off through Group Policy and after an image is deployed it is attempting to install updates which should not be installed through Windows. I also have the protectmypc setting set to 3
    and have updates turned off before capture. Something is searching for updates and during the deployment process and I need to find out how to stop this from happening. Someone has to know where these updates are coming from.
    Joseph N. Sunderman | IT Professional

  • MDT 2010 hangs on uefi equipped machines

    Hi all,
    I'm new to MDT (Started playing with the betas earlier this year), but I've been using WDS for nearly a year or so.  I have an MDT 2010 server running on a Windows 2003 box with all of the latest service packs, fix packs, etc. The MDT server has been configured to deploy our install images to our test lab (We run everything from 2003 R2 up to 2008 R2). So far the MDT server (I upgraded the betas to the RTM code) has been running great on almost all of our machines, with the exception of our uEFI based machines.
    We are primarily an IBM lab (We have a smattering of Dell and HP boxes, but none yet that have a uEFI Bios). We have mostly xSeries and BladeCenter products.
    Our scenario:
    We're running MDT 2010 in an LTI setup. No database, we just want the end user to be able to PXE boot the box, boot the Lite Touch 32 or 64 bit wim and then get the MDT screen that allows them to pick what operating system they want installed. Let the install start in the WinPE mode and then the WinPE mode reboots and continues on its installation path (DOS boot mode for the 2003 R2 installs , 2008 GUI setup, etc)
    That part works fine for all of our regular xSeries (ie non uEFI) blades and servers. The user picks their OS, the preinstall phase starts, finishes and reboots out of the WinPE shell and then continues on with its next phase of the install.
    Our uEFI enabled boxes (Mostly IBM HS22, x3200 M3, x3250 M3) boot into the MDT selection screen just fine. We can choose our os and the install starts in the PE phase (Sorry if I'm messing up the phase names still learning MDT as I go). Once the WinPE phase finshes, instead of rebooting (like the non uEFI boxes do) these boxes automatically open a Command Prompt window and then sit there until you close the window or type exit. I have not opened the command prompt (I know you can hit F8, but this is being done by MDT on its own). Once you manually close this window, the install continues just like it should.
    I've updated alll firmware levels on these boxes to see if it might be something going on there, but no luck. MDT 2010 continues to hang (opens the command prompt) after completing the WinPE portion of the installation.
    Has anybody else out there seen this behaviour? Anyone have any ideas how to correct it?
    Thanks,
    Jim Kosek

    Hi there,
    This is the original poster.
    I had meant to list out our steps to correct this issue earlier this week, but this is the first chance I got to update this. Hate being the only one in on a holiday week :(
    Like Keith stated above this is caused by the NETIMM.INF driver. Thanks to Keith's guidance in parsing through the log files (Especially since I had no idea where most of them were hiding) we were able to see that the NETIMM.INF driver would try and load during the Windows PE Setup phase. This driver does not appear to load correctly in Windows PE (I've been trying to get it to load into a different PE image for the better part of a year for other reasons). When this driver gets loaded during the PE phase, the installer would see that the driver did not load correctly. The installer would pop open a command prompt window to allow you to debug what went wrong. Since this driver isn't really needed for the installation, you could exit the command prompt window and your install would continue along just like it should.
    If you look at your wpeinint.log file you should see something like this:
    Info      Installing device usb\vid_04b3&pid_4010 X:\WINDOWS\INF\netimm.inf failed with status 0xe0000219
    Info      Spent 19095ms installing network drivers
    Info      STATUS: FAILURE (0xe0000219)
    Warning   Applying WinPE unattend settings failed with status 0xe0000219; ignoring shutdown settings
    This is what hangs the box.
    When Keith first pointed me to the driver being the problem, I just removed the driver from my Out-Of-Box-Drivers and still had the issue. The NETIMM.INF file is part of the base install media so it shows up anyway. I then did just what you did by disabling the Commands on the USB Interface. This basically stops that device from being available during the install, so no device, no driver and MDT is happy and reboots like it should.
    The problem I have with that solution is that all of the OS Firmware update disks from IBM want to try and communicate through that USB device when you go to update anything on that machine (uEFI code, Diagnostics, ASU, etc). So if that device is not there, then you cannot use any of the on-line flash utilities to update your machine. Not sure how many machines you have (or how often you upgrade the Firmware on them), but that might come back to bite you later. Plus you also have to remember to disable that on all of your IMM equipped machines BIOS's. And then when a user resets the Bios back to defaults that USB device gets turned back on again and you start getting calls that the deployments are hanging. I'm in a test lab and we get new machines brought to us all of the time. I may not be the one to set it up and then I have to rely on somebody remembering to change a setting in Bios. I'd rather just change it globally from my end and then I know its fixed. But to each their own.
    I did like Keith suggested and edited the WIM files. I simply renamed the NETIMM.INF to NETIMM.OLD and closed the WIMs back up. I too was worried about having to change the WIM files repeatedly. I'm the one that built out our MDT server. My co-workers know enough to rebuild the deployment share if need be, but they don't use MDT enough to know about mounting WIMs and changing files and such. What I did was I changed these on our base install media. In my case, MDT picked Windows 7 to build out the 32 Bit LiteTouch.wim and 2008R2 for the 64 bit LiteTouch.wim file. Once I changed these on the original disks, all of my LiteTouch rebuilds have kept this change intact. Now if I ever change these original disks and have to completely rebuild the WIM files, I'm sure I'll forget to make that change. However I'd rather deal with that then (My end users will let me know if the installs start hanging again) instead of having to remember to change each machine's bios settings.
    Now since the NETIMM.INF driver is no longer on the install media, I need some way to add that driver during the installation and not during the PE phase. What I did was to add the NETIMM.INF file into my Out-of-Box Drivers section. I then created a new selection profile called LiteTouch. I added all of my necessary drivers, with the exception of the NETIMM.INF driver, into that new LiteTouch selection group and I changed my LiteTouch Components to only load from the LiteTouch Selection group during the PE phase. I then call my All Drivers group during the installation of the Operating Systems. That way I do not get the driver during PE, but I get the driver installed during setup and I can then talk to the IMM for updates and such. 
    My way might not be the best way for everyone else, but it does what I need it to do.
    I would like to take a minute though and thank Keith again for all of his help in troubleshooting this problem. We have a lot of remote users and this was causing them some grief because they would start a deployment and expect it to be done when they came back later. On the IMM equipped machines, they would be staring at a command prompt screen and have no idea what went wrong. I would then get calls stating that the install failed. Without Keith's help I'd still be getting those calls from our users.
    Jim Kosek

Maybe you are looking for

  • Line Items in Excise Invoice

    Hi We have a scenario in which one of our customers is importing some goods against a PO. the number of items is about 5000 in the Invoice. However, standard SAP allows posting of only upto 999 items in a document. Is there any way in which the same

  • Redirect attachment to other https port on same server

    Hi I want the EBP attachments to be redirected to the other port on the same server. Can you please provide some inputs on this? Regards Rajeev

  • Korg Nanopad not working in Garageband since upgrading to Lion

    I've just upgraded to Lion and the new update to Garageband but have found that my Korg Nanopad's not working anymore. I've got a Nanokey and that's fine but not the Nanopad. I've Downloaded and installed all new drivers etc... but still no luck and

  • Too much space between Divs/Containers?

    http://kansascitycrates.com/antiques.html I am rewriting my company website and can't find the setting to move my top 2 containers (editable regions) closer to the header / horizontal spry menu bar? Specifically, I want to reduce the space above and

  • How to reverse a column

    Hi All, I have a table test. The data is as given below x y z 1 4 7 2 5 8 3 6 9 i want to reverse the column y the output should be x y z 1 6 7 2 5 8 3 4 9 Thanks, Vikas