MDT 2010 - USB 3.0 issue after OS Install and Inject Drivers steps

Hello,
I'm using MDT 2010 and I'm booting and image PCs from a USB drive. On some newer systems (eg: Latitude El530) I have issues when I use the USB 3 ports (if media is connected to USB 2 port, everuthing is fine). The systes recognizes the USB stick and I can
start the Task Sequence just fine. I pass the Install OS step and Inject Drivers step, but after the first reboot, I get the prompt to insert the media to continue the deployment. This happens only if the stick is connected to the USB 3.0 ports. If I
check Device Manager, I see the USB device withouth driver. The drivers are already on the USB stick...I puled them from FileRepository from an updated system with all the drivers. Is anyone else having similar issues? I see other people have USB 3 issues,
but mostlly to start the deployment from it, or at partitioning...I don't have that issue. My issue starts after the OS is installed.
Any sugestion is appreciated...Thank you...
aburica

You should be able to do this.  nVidia Optimus video drivers have the same issue.  How we solved this
We create selection profiles for each make and model
We inject every single driver in profile for each make and model
The Optimus driver then gets installed because it is local to the machine already.
Why it didn't work before is the child device never gets detected during the PNP enum that happens when you have 'Install only matching drivers from the selection profile' so never ends up in the local driver store.
P.S. We ONLY have the drivers that install imported into each make model folder.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
How to ask a question that is fixable.

Similar Messages

  • **** Bluetooth and keyboard issues after latest itunes and 10.6.5 update.-

    read below
    Message was edited by: Paulman!

    Have been experiencing intermittent keyboard, trackpad and usb mouse function issues after installing the latest system and itunes updates, which was yesterday or day before.
    (Lost even some work because the only way to get things moving was to restart.)
    Tried solution (verify and repair disc permissions) that coconutmunk recommends under similar topic from 2007:
    http://discussions.apple.com/thread.jspa?threadID=1190210
    That solution fixed worst part of the problem: getting all 3 parts irresponsive.
    It seems as problem is still not entirely solved as computer has once tried to lock all 3 again, however before I had chance to get concerned it locked up all 3 again by itself.
    Yet, usb mouse keeps on getting disconnected every now and then randomly, even after 2 runs with disc permission solution.
    Conclusion from 2007topics where people had issues with keyboards and/or mouse devices, was that it was Leopard system having those problems, nothing like that was reported in about Tiger system, as it seems.
    Now, those problems were fixed back then with an update, but seems this new update has brought back old issues!
    Frankly, I really do not have time with computer issues, on top of Maya being characteristically moody already every now and then, as I have to be done with a pretty big project only within few days!
    Please PLEASE, Apple crew, fix this issue asap!
    I really need those things working properly quick!
    Thanks in advance!

  • I tried to install windows 7 in my macbook pro late 2011 but i tried to create partions after it installed and it turn to dynamic disks and ican't access mac or win 7 what should I do i cant format it because i dont have a backup

    I tried to install windows 7 in my macbook pro late 2011 but i tried to create partions after it installed and it turn to dynamic disks and i can't access mac or win 7 what should I do i cant format it because i dont have a backup

    It's not that you can't format it because you have no backup, it's because you'll lose everything when you do. Lesson learned. Always have a backup.

  • When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed"   and of course there is no device that shows up either.  It would be great to download my photos!  I'm using Windows

    When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed"   and of course there is no device that shows up either.  It would be great to download my photos!  I'm using Windows

    Go through this support doc:
    OS: Device not recognised in iTunes
    Windows: http://support.apple.com/kb/TS1538

  • Can't open itunes,even after un-installing and then re-installing!

    I keep getting the following error message when trying to open itunes on my pc.
    'The folder "itunes" cannot be found or created, and is required.The default location for this folder is inside the "my music" folder.'
    This error message appeared even after un-installing and re-installing itunes.
    I conducted a search for the 'my music' folder,and it came up with nothing.
    Please help!

    If you truly don't have a folder named C/......./My Music, there are bigger problems with that PC.
    That folder is a default windows XP folder and should be there.
    The file extensions setting is easy to change. Win Explorer > Tools > Folder options
    http://www.fileinfo.com/help/windows-show-extensions.html
    If your music folder really doesn't exist, see if you can do the shift-start and CREATE a new library. It will be blank, but at least that will tell us if itunes can even start. It will NOT run without an ITL library file.

  • I can't get Firefox to start. It says that Firefox is already running after re-install and re-start it again. I have deleted all profiles, but no luck. HELP!

    I can't get Firefox to start. It says that Firefox is already running after re-install and re-start it again. I have deleted all profiles, but no luck. HELP! edit

    -> [[Firefox is already running but is not responding]]
    -> Profile in use
    * http://kb.mozillazine.org/Profile_in_use
    Check and tell if its working.

  • Some issues after clean installing windows 7 pro 64bit

    Hi,
    I have a couple of issues, I clean installed windows 7 pro, 64bit, (vanilla) restored my license with ABR and used system update to download all the drivers. (no issues until here) But after restarting the system, I found this issues:
    1. I have to put the bios in legacy mode for system to boot. Otherwise it gives me a "no operating system found" message. Is there any way to make a proper installation for the system to boot in UEFI and LEGACY?
    2. System update didn't install thinkvantage center. (the program that stays in the taskbar). Should this be installed manually? Or system update should have installed it?
    3*. I can not use lenovo driver page of my x120e. In IE it shows me repeatedly the wizard to choose my model, although I enter the correct info there. It starts all over again and again. Tried opera, I can see the drivers page, but I can't browse, or expand none of the sections. (all I can think of this, do I need java for the page to work?)
    3*. UPDATE: After installing IE 9, java and flash player, still not working. Opera too. Google Chrome works fine.           What's the matter with IE and OPERA? What component do I need to make IE work with lenovo drivers download page?
    Can anyone help me? Never had to deal with these issues.
    Thanks in advance 
    I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
    Who helped you today? Do not forget to thank him.
    My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

    Hello,
    Have you tried wiping the hard disk drive and reinstalling Windows 7 Professional x64 from the factory recovery discs while the BIOS is set to UEFI?  If so, did that work?
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Cannot get USB port to work after re-installing of SP2 on Satellite Pro L20

    After re-installing XP Home SP2 and downloading all the updates & Drivers from here I cannot get my USB port to work properly, if I have more than one peripheral plugged in it says "Bandwidth Exceeded".
    I have a Behringer BCD2000 which is a souncard/midi controler for DJ mixing, it worked fine before i reinstalled windows, now it clicks and pops when playing tunes, also the ASIO doesn't work when I run Traktor (Dj software) and the program freezes. Any other external sound card wont work either. I've been all through the device manager no conflicts apart from an ! over Serial under hidden devices.
    I'm lost, is my only option buying a PCMCIA sound card, it worked fine before so surely there is a software solution to this?
    If anyone can help I'd be most appreciative.

    Hello
    Try to disable USB Error Detection:
    1. Right-click My Computer and then click Properties.
    2. Select Device Manager to view the Device Manager
    3. Locate and click the Universal Serial Bus Controller entry.
    4. Double-click Universal Host Controller and then click the Advanced tab of the Universal Host Controller Properties.
    5. Put a checkmark in the box for Disable USB Error Detection. Click OK.
    6. Restart the computer to see if "Bandwidth Exceeded" message occurs again
    Did you use recovery media to reinstall WXP? When someone write it worked before and now not it is really not easy to say why this happen. Try to configure notebook as before and maybe it will work again. Behringer BCD2000 is not known to me and I dont know how it works and which software must be preinstalled there.
    Can you use different USB devices like external HDD, USB mouse, USB memory stick or printer?

  • First USB port stops working after random time and won't work until I restart

    Hey guys
    I have this problem on my late 2011 Macbook Pro 13 inch,
    It's been for a year already and it really freaks me out and drive me crazy
    My first USB port next to the thunderbolt stops working after like 3 days, and it won't respond until I restart my computer or log off and log in again.
    If I restart my computer, USB stops working after 3 days and won't respond until I restart
    If I log off it works for like a couple of hours and then stops again
    I have tried EVERYTHING, SMC reset - no luck, PRAM reset - same results, Upgraded to lion same results, Upgraded to mountain lion - SAME RESULT
    And I can't take it to an apple store because I'm not from the US
    I am 100% sure this is a software problem and I've seen here that many people have faced this problem
    Please help, it really freaks me out

    ElectroSpyzz wrote:
    Hey guys
    I have this problem on my late 2011 Macbook Pro 13 inch,
    It's been for a year already and it really freaks me out and drive me crazy
    My first USB port next to the thunderbolt stops working after like 3 days, and it won't respond until I restart my computer or log off and log in again.
    If I restart my computer, USB stops working after 3 days and won't respond until I restart
    If I log off it works for like a couple of hours and then stops again...
    I'm sure this isn't what you want to hear but unless you really are using your laptop 24 hours a day, is there any reason why you don't just shut it down and reboot when you're ready to use it again? I have to wonder how many other MacBook Pro owners potentially have the same problem but when they quit computing for the day, their computers quit too.

  • Issues after Clean Install

    I erased my HD and did a clean install of Leopard to speed up my system.
    After the install I did a software update and while restarting a window popped up that said something about Boot Cache. It seemed like it was taking a long time, so I left it overnight.
    The computer was up this morning, so I started to install applications. I then did another software update..
    I just installed iLife 08 and hit restart. Now the computer seems to be hanging at the part where the little circular dots are supposed to show up at the bottom middle of the screen.
    The reason I did a clean install is because one of the issues I was having is that the computer took FOREVER to restart. A clean install doesn't seem to have fixed the problem.......? That doesn't seem right.
    I am on a G5 Quad. There is nothing on my system except 10.5, Final Cut Studio 2, and iLife....

    motherwell wrote:
    I erased my HD and did a clean install of Leopard to speed up my system.
    A clean install would mean that you did not import any previous files or settings but after a full erase you installed Leopard with all new settings and programs manually.
    If you imported any old files or settings, you dirtied your install, possibly with whatever caused your original problem.
    It is always better to solve or fix an issue rather than to start over again, because sometimes the problem is obvious.
    If after a true clean install a problem recurs, then your hardware is at fault - RAM, HD, some driver, board or something like that. Again, it's always better to diagnose a problem and find out what is/was causing it.

  • LCM login issue after SP2 install

    Hi,
    I am unable to login to LCM after SP2 install, unable to uninstall LCM as well.
    "Sorry, LCM application is unable to process your request."
    It was working fine until SP2 install..All servers are running fine..I stopped and started SIA and all servers.
    I also tried to uninstall or repair SP2..doesn't allow uninstalling...
    Error 1723..A DLL required to run this installation could not be run...All servers running fine..
    Please help me if anyone come across this problem..

    Hi Seb,
    Thanks for the timely help..As per the note, I tried to update the SIANAME in registry.
    But,It was already updated and i just saved registry and ran addnode script to update the node..
    when i run, getting exception " Could not commit LCM Service category because another object with the same name already exist" Ofcourse LCM Service is already running..Please suggest...

  • HP G4-2275dx left two usb ports not working after OS install.

    Hi all.
    I had to remove my windows 8(Upgraded to Pro before) install due to compatibility with certain programs and I was not very satisfied with the results.
    So I had an extra cd key for windows 7 x64 home premium.
    Everything went smooth.
    I had all my drivers installed.
    I installed Direct X also.
    But when I tried to use my tutle beach headset it would not install the driver for the headset or even make the sound when a device is mounted.
    So I checked device manager and I saw three yellow excelemation errors.
    two were "Universal Serial Bus(USB) controller"
    one was "SM bus controller"
    I have installed the catalyst drivers multiple times but no dice.
    Any help will be appreciated.
    Happy Holidays.
    This question was solved.
    View Solution.

    Hi,
    Download and install the Chipset driver from the following link.
    http://support.amd.com/en-us/download/chipset?os=Windows%207
    When done, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • IPhoto issues after Leopard install...

    I downloaded Leopard not long ago and I am having some problems iPhoto. It seems like my libraries and photos are there, and I can see the thumbnails. But when I go to view the photo I get the big grey box with a ? in it. Is there a setting I am missing or did something go wrong when I upgraded to Leopard? Any advice or direction will be much appreciated. Thanks.
    --Matt

    Welcome to the Apple Discussions. Where did you download Leopard from? And what version was it?
    How did you install it, Archive and Install or Erase and Install?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • TF10121: The path '' is not found or not supported. Type or select a different path. After SQL2012 install and Solution upgraded to VS2010

    I have recently upgraded a solution from vs2008 to vs2010.  This solution happens to contain several .rptproj file (SSRS 2008R2 reports).  I was able to upgrade the solution after I installed SQL2012 (which installed the necessary templates
    into vs2010). 
    However whenever I open the solution the Output window now pops up and continuously lists the same error (shows output from Source Control - Team Foundation).
    TF10121: The path '' is not found or not supported. Type or select a different path.
    I have tried reinstalling Team Explorer SP1, and VS2010 SP1, but with no change.
    If I unbind the solution from source control the messages go away.  Rebind and they return.
    The problem doesn't always start straight away, it may take a few solution explorer clicks.
    Opening an rdl into the editor seems to halt the messages, until I go back to clicking in solution explorer (similarly the issue doesn't always re-occur first click).
    E.g.
    TF10121: The path '' is not found or not supported. Type or select a different path.
    TF10121: The path '' is not found or not supported. Type or select a different path.
    Audit.rdl has been automatically checked out for editing.
    Then no errors until going back and clicking in solution explorer (which is using auto hide)
    [See also:
    http://social.msdn.microsoft.com/Forums/en-US/tfsversioncontrol/thread/8c7cc472-3ac1-4800-8199-5f4b41414748]
    Does anyone else out there share this problem or more importantly a solution/work around?

    Hi Evanw21,
    Based on the current information, it seems to be the known issue described in the following KB article:
    FIX: TF10121 error when you right-click a project file of the project or a folder in the project in Visual Studio 2010
    The root cause of the problem is that we hold onto a stale reference to the old project and get back an empty string when we try to get its directory path. To resolve this problem, contact Microsoft Customer Support Services to obtain the hotfix. For a complete
    list of Microsoft Customer Support Services telephone numbers and information about support costs, visit the following Microsoft website:
    http://support.microsoft.com/contactus/?ws=support
    Besides, there is one easy workaround. If we close the solution and re-open it prior to attempting to re-add the project, we should be able to add it successfully. 
    References:
    TF10121
    Hope this helps.
    Regards,
    Mike Yin
    If you have any feedback on our support, please click
    here
    Mike Yin
    TechNet Community Support

  • IPhoto won't open after new install and restore of back-up

    Hi guys
    My hard drive just died (for the second time in 6 months!) so I have just gotten the computer back with a new drive. I did a new install of Tiger from my original install CDs, did the download thing to get all the updates, and ran a "restore" from my external drive using iBackup (http://www.grapefruit.ch/iBackup//index.html) to restore all my previous system settings, documents, etc. So far this seems to have worked well, a couple of 3rd party applications didn't re-install - specifically Neo Office and WiFind - but I was able to manually install those and everything seems to be working fine.
    Except iPhoto. It won't open. When I click the dock icon it bounces once and does nothing. No little arrow under it or anything. Nothing at all happens when I click the icon in Finder (in the Applications folder). When I searched it in spotlight it told me there was a file called iphoto.crash.log, so I went and had a look at that hoping it would tell me the problem, but I don't understand it. I'm not particularly good at the behind the scenes stuff with computers.
    Wondering what I should do now - if someone can perhaps interpret the log file and find the issue if that would help, or if I should uninstall and re-install iPhoto by itself (and if so, how?), or if there is something else that may be causing the issue. I noticed there are a few files relating to it when I search with spotlight but I don't know which of them might be relevant. I could post a screenshot if that is allowed, or post the log file if it would help?
    Thanks in advance for any advice or help!
    Regards,
    Chloë

    400 Updates???
    Did you Repair Permissions before & after each one?
    The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
    The combo update for PowerPC-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
    The combo update for Intel-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
    Repair Permissions before & after re-install, then reboot again each time.
    If all the above do not resolve the problem, then it's time for an Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
    http://docs.info.apple.com/article.html?artnum=107120
    I only use Software Update to see what is needed, then get them for real via...
    http://www.apple.com/support/downloads/
    That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

Maybe you are looking for