Meaning of Warning Message

Dear all,
I have an INCLUDE, say the name is "Z_INCLUDE". I have included it in a program, say the program name is "Z_REPORT". When I perform syntax check in ABAP Editor, the following warning message appears for every single subroutine in Z_INCLUDE.
Include Z_INCLUDE
There should only be definitions in the TOP include (or nested includes within it). This means that any sort of implementations (CLASS... IMPLEMENTATION, FORM..., FUNCTION) is not meaningful.
01. What does the warning message mean?
02. How do I get rid of it?
Thank you in advance.
Regards,
Goh Tiam Tjai

Hi,
Warning messages W are  processed according to the context in which they occur.
1)Messages Without Screens:-
  In PBO context program continues processing after the MESSAGE statement otherwise, program terminates and control returns to point from which the program was called.
2)Messages on Screens:-
    Warning messages are not possible in POH or POV processing.
PAI processing is terminated, and control returns to the current screen. All of the screen fields for which there is a FIELD or CHAIN statement are ready for input. The user must enter a new value. The system then restarts PAI processing for the screen using the new values.
3)Messages on Selection Screens:-
    Selection screen processing terminates, and the    selection screen is redisplayed.
4)Messages in Function Modules and Methods:-
   Warning  messages are ignored in this case.
Thanks,
Pramod

Similar Messages

  • What does this message mean? "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired"

    What does this message mean? "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired"  I get this when I try to repair permissions in disk utility.

    It's an innocuous error you can ignore. It was introduced with previous updates for ARD and/or Java before Lion. These are messages, not errors. They will cause no harm, and they will be repeated each time you repair permissions.

  • Doing disc repair I got the following message. What does it mean?Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

    I got this message. What does it mean?
    Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.

    That the current software is installed. Ignore it.
    (71759)

  • Email warning message...does this mean my bt email...

    I had a spate of these email warning messages (oddly enough AFTER bt had prompted me to change my password).  Then I had a complaint from a friend about receiving emails - purportedly from me - promoting some website.  Ran a virus scan.  All quiet.
    I've just got another one.
    "This message was created automatically by mail delivery software.
    A message that you sent has not yet been delivered to one or more of its
    recipients after more than 48 hours on the queue on lserver.vanessacox.com"
    which is different from the previous message, which was:
    "This message was created automatically by mail delivery software.
    A message that you sent has not yet been delivered to one or more of its
    recipients after more than 48 hours on the queue on mercury.anticlown.com"
    Does this mean my account has been hacked twice now??  Or what?  And what should I do about it? 
    Help?
    Thanks.
    **Here today....blonde tomorrow**

    The email that you had "from BT", areyou sure it was from BT. Did you click on links within the email to change your passwrod. If you did it was possible that the email was a phishing email and that by doing the password change you gave the hackers access to your email account and all you contacts details.
    You should have a read through this link and follow the instructions and check that there is no forwarding email addresses set up etc. Change your password and security questions.
    http://bt.custhelp.com/app/answers/detail/a_id/39411/?s_intcid=con_L1:Technical help:L2:Email or security:sab:locked
    The hacker will now have your contacts details and can use them at will and spoof your email address which will make any emails they send appear as though they have come from you. There is not much you can do about that now other than start using a new email address and tell your contacts to delete any emails that come from your hacked address. 

  • Warning Message re Layout, what does it mean

    When burning a DVD in DVD SP, I receive the following two warning messages, even though the session is ultimately marked as successful:
    1) Warning: The file PFARDVDlayout found in the VIDEO_TS or HV DVD_TS folder will not be included in the final disc. [note: PFAR_DVD is the project name]
    2) Warning: The file VOD_DATA.LAY found in the VIDEO_TS or HVDVD_ TS folder will not be included in the final disc.
    I have received these same warning messages for two different projects I have burned DVDs for.
    I noticed on one of the projects that the type in the interface is something less than sharp. Do these warnings have anything to do with the interface image quality?
    What do these warnings mean, and what impact do they have on the final product?
    How can the warnings be avoided?
    Thanks in advance.

    Pamela:
    Those are standard warnings and means nothing for your final DVD quality. Some files that DVDSP creates during building for "it's own use" will be not included in the final disc and MUST not be inlcuded.
    Nothing related with image quality.
    Hope that helps !
      Alberto

  • When pressing the "R" on the keyboard to record the following pop up - "Beta-only warning message-not to be localized Can't create record files please report" and then this "error occurred Result= -48"  What does this mean?

    When pressing the "R" key on the keyboard to record the following pops up - "Beta-only warning message-not to be localized.  Can't create record file, Please Report"  I press O.K. and this pops up - "Error occurred Result= -48".  Can't figure out why.  First time I have every had problems>  What's up with this?

    a -48 error is a duplicate filename.
    the first things i'd try are the oddball problems fixes:
    http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • I am getting a warning message when i am trying to create a host-named sitecollection.

    Hi guys,
          I am trying to create a host-named site collection. I have created the root site collection. After that i have tried to create customer root site. I have doing this process with the guidance of this link.
    http://technet.microsoft.com/en-us/library/cc424952.aspx#section2a
    When i tried to create a customer root site. I am getting a warning message
    " WARNING: The port specified for the new host header site does not match any known bindings in the specified Web
    Application.  The new site will not be accessible if the Web Application is not extended to an IIS Web Site serving
    this port."
    I couldn't when this warning message comes. I tried to bind the server with webapplication which is created for host-named site collection. No use.
    Can anyone help me to solve. And i wanna know why this error message comes!!!
    Thanks in advance
    Rajendran.

    First, you shouldn't create a host named site collection on a Web app that has host header named.  Doing that implements host names at two different levels and will not work reliably.  Second I'm not sure what you mean when you say you didn't
    use the FQDN but used just the domain name.  A Full url will always be either an FQDN or a shorter Netbios name.  If you use a Netbios name it simply assumes the local AD domain of the workstation to create an FQDN as the url  There is no way
    to use just the domain name.  For example, Contoso.com is the domain name.  Server.contoso.com or WEbsite.contoso.com are FQDNs.  YOu can also use a shorter version that is just server or website, but when those resolve in TCP/IP they would
    still resolve using server.contoso.com or website.contoso.com if the workstation where your browser is was in the contoso.com domain.  What is the URL for your root site and your host named site?
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • How to remove the warning messages in CODE INSPECTOR of my report......?

    Hi All,
    I am trying to do the check to my program i.e CODE INSPECTOR. i am seeing the following warning messages below.
    1 warning message
    Program zraj0xxx include  zraj0xxx row 000083 Column0000
    %LINR-VBUP contains a hyphen
    (The Hyphen is used as a dereferencing operator! )
    Note: when i double click on the above message its taking me to the below code of my program.
    DATA %COUNT-VBUP(4) TYPE X.
    DATA %LINR-VBUP(2).
    TABLES VBPA.
    DATA %COUNT-VBPA(4) TYPE X.
    DATA %LINR-VBPA(2).
    2 warning message
    Program zraj0xxx include  zraj0xxx row 000079 Column0000
    Field string VLPMA is not referenced statically in the program
    Note: when i double click on the above message its taking me to the below code of my program.
    SELECTION-SCREEN: BEGIN OF BLOCK PROG
                               WITH FRAME TITLE TEXT-F58.
    TABLES: VLPMA,                                             
                  VLKPA.  
    TABLES VBUP.
    3 warning message
    Program zraj0xxx include  zraj0xxx row 000001 Column0000
    TEXT- GOH from the text pool is not used.
    Note: when i double click on the above message its taking me to the below code of my program.
    REPORT ZHYD0147 LINE-SIZE 255 NO STANDARD PAGE HEADING
       MESSAGE-ID ZB                                        
       LINE-COUNT 065(001).
    Thanks in advance.
    Rajesh.

    Hi Rajesh,
    First  warning message.
    DATA %COUNT-VBUP(4) TYPE X.
    DATA %LINR-VBUP(2).
    TABLES VBPA.
    DATA %COUNT-VBPA(4) TYPE X.
    DATA %LINR-VBPA(2).
    Here you are not supposed to use hyphen but instead use '_'.
    Second warning message
    Program zraj0xxx include zraj0xxx row 000079 Column0000
    Field string VLPMA is not referenced statically in the program
    That means you are not using this VLPMA any where in your program so bettr delete fromt he Top Include.
    Note: when i double click on the above message its taking me to the below code of my program.
    Third warning message
    Program zraj0xxx include zraj0xxx row 000001 Column0000
    TEXT- GOH from the text pool is not used.
    this also means that you are not using this Text elemnt anywhere of your program.So delete this one also.
    Thanks
    Rohini.

  • Warning message in IT0021

    Hi experts,
    When i create, change or display the record in IT0021with any subtype, it shows warning message "Assignment to feature P0021 did not take place ", what does it mean? what will happen if i ignore this message? where it will going to effect?
    How to handle this warning message?
    Kindly guide me in this..

    Hi,
    pls check the feature P0021 is configured against country grouping 40 and required subtypes.
    The subtypes 1 (Spouse), 2 (Child), and 10 (Divorced spouse) are supported
    now save and activate the same CTRL+F3.
    regards,
    puja
    Edited by: pujapushap on Mar 5, 2012 7:09 AM

  • Warning message in field exit

    Hi All,
    I'd the requirement of giving a warning message for transaction VA01 if user enters some specific order type.
    So I'd created a field exit for AUART for this screen. But i am able to give error message only and found out that warning & info messages can't be given in a field exit.
    Please help me out. Is there any way I can give a warning message in field exit or suggest some other sol. for it.
    Thanks,
    Manu

    Hi,
    Thanks f or your answers, but the issue is that i need to give this message as User enters the details on VA01 screen & presses enters.SO i can't use user exit like move_field_to_Vbak & others.
    Also, using a FM to give pop up message will ultimately make use of statement CALL SCREEN which is not allowed in field exit, i also tried FMs which displays messages normally means not in pop up screen, but again through it also i can only give error messages.
    Please suggets if there is any other option.
    Thanks,
    Manu Parihar

  • SSIS package fails with the error as given below. But its warning messages are incorrect.

    My SSIS package loads data from access database to SQL Server database.
    It's a straight copy. It fails with the below warnings and error message as shown below:
    Error messages:
    [OLE DB Source [113]] Error: There was an error with OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID] on OLE DB Source.Outputs[OLE DB Source Output]. The column status returned was: "Text was truncated or one or more characters had no
    match in the target code page.".
    [OLE DB Source [113]] Error: The "OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID]" failed because truncation occurred, and the truncation row disposition on "OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID]"
    specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
    [SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.  The PrimeOutput method on OLE DB Source returned error code 0xC020902A.  The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure
    code is defined by the component, but the error is fatal and the pipeline stopped executing.  There may be error messages posted before this with more information about the failure.
    There are 3 warning messages even before I run the package. Warnings are all about the mismatch between the source and destination column sizes.
    I cross checked the source and destination column sizes. The destination column sizes are fairly high than the source column sizes.
    It worked well all the while and when we are going to pre-prod it is throwing errors. Any help is highly appreciated.
    Thank you.

    It worked well all the while and when we are going to pre-prod it is throwing errors. Any help is highly appreciated.
    Please check if the dev destination table has same column data types and size as compared with pre prod table
    Thanks, hsbal

  • Reg: Warning message in UWL or task TS00700049 &  TS00700059

    Hi ,
           We tried to configure the Universal worklist. On registering it , we are getting hte following warnings.
    WebDynproApplication value not found for task TS00700049 in system SAP_Webflow
    Portal Component value not found for task TS00700059 in system SAP_Webflow
    Can anyone let us know if we have to give any parameters in SWFVISU tcode.
    Thanks & Regards
    Priya

    Hi Priya,
    WebDynproApplication value not found for task TS00700049 in system SAP_Webflow
    This means in the visuvalisation parameters maintained for this task in back end, the WebDynproApplication name specified is not available in portal.
    Do one thing, goto swfvisu, then search for task TS00700049, select the task and click on visuvalisation parametres option on the left hand side. Check what is the webdynpro application name specified there.
    generally this value will be local/applicationname
    *Portal Component value not found for task TS00700059 in system SAP_Webflow *
    This means the portal component specified in the backend is not available in portal.
    Do one thing, goto swfvisu, then search for task TS00700059 , select the task and click on visuvalisation parametres option on the left hand side. Check what is the portal component value.
    More over, I hope these two are only warning messages. they wont effect your UWL functionality. If you are using these two tasks then you wont get desired results.
    Regards,
    SrinivaS

  • Handling a warning message in BDC through RFC

    Hi all,
    I have a requirement where I have to do a CALL TRANSACTION using a RFC Fn. Module.
    This is for sending time sheet data to CATSDB thru CAT2 (T-code). In the process of time entry I have to go through a warning message (time entry for saturday & sunday ) and save the time sheet. I have recorded all this thru SHDB and created the BDC. The FM works fine in the back end. It is also fine when this RFC is called in the front end from a portal, except for the warning message part. The FM errors out when called thru portal  for uploading data for saturday or sunday.
    There seems to be no problem when I call this function module in the backend using a custom program and try to save time for saturday and sunday. I have tried various options and founnd that the RFC is failing only when called for saturday and sunday. Somehow the BDC part where the warning message is handled is causing the error.
    One of my colleague said, the backend is trying to return a dialog box/screen (warning message pop up) to the fucntion module which is not being accomodated or something of that sort????
    Is this true??? So does this mean I cannot do it the way I am trying to.
    Any suggestions and thoughts on why this is happening. Am I missing something here???
    Any kind of input is highly appreciated.
    Thanks
    M
    Edited by: Mark Mark on Aug 26, 2008 5:45 AM
    Edited by: Mark Mark on Aug 26, 2008 6:07 AM

    Hi Anees, Thanks for your suggestion.
    I was probably not very clear in stating my problem. I do not have to display the error or warning message.
    During time entry,when I click SAVE button, I get a warning message, to get through this message I have to hit ENTER  again (now the time sheet is saved). All this I have recorded in SHDB and used in the BDC.
    Now my problem is this BDC for saturday & sunday (the warning message comes up for these days) does not work when the RFC is called from the portal, whereas the time sheet is saved without any errors when I try to call this from the back end.
    Also the RFC works fine for the rest of the days both in the back end and also when called from the portal.
    I hope I am clear.....
    Any suggestions
    Thanks
    M

  • Warning message while posting Credit Memo.

    Hi Guru,
    Currently the Invoice shows a soft warning message if a same number
    in Reference field (XBLNR) is used to post two different inovices.
    the client wants the same kind of Soft message to be appeared in case of a same number is used in the Reference Field when Posting credit memo. I think the check shd be against Accounting Doc right??
    Incase of invoice we have a check for duplicate invoice in SPRO and we can maintian it..
    What about credit Memo??? we do have any config...to my knowledge we need technical development.
    In Se91 i will go and create new Message and assign it to M8(Message Class for invoice)........and do assignments in OBA5
    Now the soft warning msg can be achieved only by calling this msg in ABAP Code right??? can be done thru Config..?????.
    if any other details if i need to know please do let me know.....or anyother suggestions....to achieve this,,,
    Is it a Config or Developement ???
    Thanks for the support
    Balaji

    In OBA7 if i check the "Reference number" that means while entering the document the reference number is compulsory field.
    and in vendor master i already checked the docueble invoce check that is why while posting KR it is giving the warning message.
    Regards,

  • Error or warning message when closing WBS element

    Hello Friends,
    Is it possible to issue any error or warning message while closing the account assigned WBS after balancing cost to zero on WBS by settlement and (commitment zero) fully  completion of GR, but IR has not yet done that means PO is still open.
    Thanks for the help.
    Kris

    you should not use messages on closure for this
    run ME5J report
    or run a line item report on the GR/IR account
    This should be checxked from logistics side not from WBS or projects

Maybe you are looking for