Media Manage Issues with Premiere CS6

My Premiere CS6 seems to have trouble media managing entire 30 minute shows.  I have tried a number of different options.  I have made new sequences with individual segments that are smaller, new projects and reducing the size of photos in the sequence just to name a few.  Each one ends with the same error message and a Premiere CS6 crash.  Does anyone have any other solutions? 

That would work for saving all video but what about tranistions, color, audio filters?  Also media managing my projects saves a lot of space on my computer by eliminiting the video I dont use.  My stock video is saved to a back up drive.  I would like to be able to open up a media manage in the future if need be and make adjustments and re export.  Sometimes clients ask for small changes.  I have media managed every single one of my projects up to this point, this problem just recently came about.  So I know it can work and it does.  I just dont know why it doesnt work properly anymore.

Similar Messages

  • Latest nVidia 310.90 drivers issues with Premiere CS6

    Hey guys,
    I'm currently running the GTX590 with 306.97 drivers and any later drivers have proven to not work with Premiere CS6.
    I understand Premiere has issues with SLI and can only utilize a single GPU, but if I update  the drivers to anything later than 306.97, my preview window goes blank during playback. Audio is working and After Effects preview works just fine, but Premiere has issues with displaying video during playback.
    The main reason I wanted to update  the nVidia drivers is for better gameplay, but seeing that i cannot edit in Premiere because of that, i have reverted back to 306.97.
    Does anyone have suggestions with regards to getting the latest drivers to work with Premiere CS6?
    Thanks!

    They work fine for me on Win 8.  But I don't have SLI.

  • Media offline issue in premiere cs6

    I recently had my copy of Premiere CS6 fixed due to a handlertitler.dll problem. However, when it was finally fixed there was some playback issues, and about a third of my media is offline. How do I relink the media to where I can hear and see my video on Premiere CS6?

    Media Offline is most often caused by the links to it, which are absolute Paths, being changed. It could be a drive letter, a file Rename, or similar.
    I agree with Jim, that the best course of action is to let PrPro relink that media, when it asks "Where is file ____ ?" This article goes into more detail: http://forums.adobe.com/message/4598705#4598705
    Good luck,
    Hunt
    PS - if you have not Moved, or Renamed anything, I would definitely check my HDD's, to make sure that they are functioning at 100%.

  • Any known issues with Premiere CC and imported HDV clips?

    I'm having consistent difficulty with Premiere CC playback of HDV video that originated in FCP 7. This was not an issue in Premiere CS6. The problem is dropout and pixelization which is consistent, pass after pass, and occurs at the same TC location on some clips. It is almost like some clips are corrupted in a consistent manner, while others are not, and don't seem to become corrupted.
    For a variety of reasons, I still shoot HDV on a Z1U, and use an old FCP7 workstation to digitize media. I then import these individual video clip files into CS6. These are clips that play correctly in FCP, Premier CS6, and in the Finder, and Quicktime Pro, but not Premiere CC.
    I have Dropboxed a sample clip to my service contact at AJA, and she is reporting the same issue with Premiere CC. (The technical support at AJA is the best I've experienced in over 30 years of video production).
    The same issue presents itself with HDV clips that were converted to such from .m2v via Clipwrap.
    Any other types of media play correctly within Premiere CC. For example, I have a CS6 project that is nothing but After Effect CS6 anims comiled into a program in Premiere CS6; it plays perfectly. So do any media that Premiere CC puts through its own conversion or import "routine," like AVCHD. Even XDCAM clips that went into FCP via XDCAM Transfer play well.
    Any thoughts?

    Tim,
    I would assume the clips work fine in FCP7, so you're not totally busted. Maybe try using Compressor or AME, like the other guy said, to export them in another format; I'd recommend Apple ProRes 422. Fallback is to work in FCP7, as the tapes are gone.
    When I 1st posted this problem, I left for vacation. I saw briefly that someone suggested a plugin in another reply, but I haven't had a chance to pursue that yet. I'm in northern Michigan (USA) with limited access to email. I'll do some follow up this Monday when I return. Good luck!!
    Sent from my iPhone
    Phil Mariasy
    Allied Media Group
    [email protected]
    419-297-2730
    151 N. Michigan
    Ste. 300
    Toledo, OH 43604

  • Slow down issue with Premiere CS4 on a Mac pro

    I am having a similar slow down issue with Premiere CS4 on a Mac pro, but I don't have bloated prproj file size.
    Here is what I am working with:
    Mac Pro intel quad core 2.8ghz
    OSX 10.6.7 Snow Leopard
    6Gigs RAM
    3TB storage between 4 drives, each drive with about 50% free space
    I am editing a 10 minute HD video from avchd files.  The edited video is very heavy in photoshop files with a variety of different fx including green screen.  The system has slowed down to almost a standstill.  Anytime I move the playcurser, or try to do any action, it displays the spinning top "thinking" icon and takes 15 seconds to several minutes to unfreeze.  I am often forced to force quit and I have gotten unexpected quits several times.   The program also freezes on startup frequently.
    No other programs are running.  When I export with media encoder, it took about 4 hours to complete.  The last 4 or so photoshop images I added seemed to tip the program over the edge.  It had been slowing down some, but those last few really dropped the processing speed.  Before those additions, export took 30 min to 1hr.
    I did delete the render files (did not check if the file size was bloated beforehand, oops) but it has not significantly affected my performance.

    Do you need all of those extra pixels in the stills? Are you panning the full 4976?
    Two things to consider are that if you using, say a 1920 x 1080 Sequence Frame Size, you can only see that at any time, regardless of how large the images are in pixels. If there are extra pixels, i.e. the Pan is not using all 4976 pxls., I would Scale to just what you need in PS, prior to Import.
    If you are doing any Scale in PrPro, its Scaling algorithms are not as efficient, as those in PS. [Note: CS5 and 5.5 are a major improvement on that statement.]
    With many large stills (the max for CS4 is 4096 x 4096, if there ARE extra pixels, pushing those around will use up resources, and quickly. As a test, some years back, I was working on a "photo wall," and was using 4000 x 4000 images. The workstation had no issues with slowness, until I got to the 5th large still. By the 8th, the Project was too slow to edit. I had to wait for everything. Luckily, I have AE, and it handles large stills much more efficiently, and much differently, than PrPro. I just moved to an AE Comp, and completed the Project, finishing up n PrPro, after I Exported from AE.
    Just something to think about. With Scaling in PrPro, this is one time, where bigger is not necessarily better.
    Good luck,
    Hunt

  • Major Issues with Premiere Pro CC

    I am currently having some major issues with Premiere Pro CC running on my macbook pro(specs below).
    I am trying to export a 4 minute video using the vimeo 1080p export settings as I usually do, and it takes about 10 hours to export the video. On cs6, a similar project would take 5-10 minutes.
    Also, the video that was exported contained a lot of clips that came out choppy and low quality.
    I am currently on the phone with tech support, and they cannot seem to figure out what is wrong.
    I have seen a few post about CC having issues with amd cards, but nothing has been confirmed yet.
    Any help would be greatly appreciated since this job is past due due to these issues.
    2011 MacBook Pro
    i7 2.2
    16GB Ram
    256 SSD + 750GB HD
    AMD Radeon HD 6750M 1GB

    You neglected to specify exactly which release of PPro CC you are running. There have been 5 of them.
    If you're on CC7.2 or 7.2.1, then you may be hitting the same problem discussed in one of these threads:
    RGB Curves: http://forums.adobe.com/message/5929088?tstart=0#5929088
    http://forums.adobe.com/message/5934916?tstart=30#5934916
    http://forums.adobe.com/message/5935386?tstart=0#5935386
    The first thing to try is switching Renderer to Software Only.

  • Issue with Illustrator CS6 - can't get it to run

    Since a couple of weeks ago, I have an issue with Illustrator CS6 - can't get it to run When starting the application I get the following error:
    "The procedure entry point ?AcquireVarient@ImageInterface@drawbot@dvaui@@QBE?BV?$intrusive_ptr@UImageInterface@drawb ot@dvaui@@@boost@@V?$rational@J@5@@Z could not be located in the dynamic link library D:\Program Files\Contents\Windows\Illustrator.exe."
    I'm running it on Windows 8 (x64). I have multiple other Adobe applications installed, which are running fine. I've tried solving the issue with reinstalling Illustrator - multiple times. My GPU driver is updated to the latest version.

    I have this issue as well on my Mac and called tech support 4 times and they can't fix it. Adobe has really gone down hill in a short amount of time!!
    Only thing that worked (as a temporary fix) is to create a new user and toggle back and forth between two users which is very annoying. Adobe has tried uninstalling, reinstalling, taking over my computer remotely, trashing plugins, verifying permissions but the fact remains that we bought CS6 four weeks ago and Illustrator doesn't work.
    I'm going on Facebook to let others know.....don't buy Adobe, it doesn't work and they don't know how to fix.

  • Having major issues with InDesign CS6

    Having major issues with InDesign CS6. Not only is it crashing, but it is corrupting the existing file.  Then when I relaunch, it is not allowing me to open the file again.
    In another instance, yesterday I opened an file created 3 months ago and it allowed me to make changes, however I could not save them to the existing file, or not even to a new name.
    I had to copy each layer on each page to create a new document.  NOT GOOD!!!

    SherwoodGirl wrote:
    Having major issues with InDesign CS6.
    Then post your qeustion on the Adobe forums is it's their software you're having problems with:
    http://www.adobeforums.com

  • Having major issues with InDesign CS6. will upgrade fix???

    Having major issues with InDesign CS6. Not only is it crashing, but it is corrupting the existing file.  Then when I relaunch, it is not allowing me to open the file again.
    In another instance, yesterday I opened an file created 3 months ago and it allowed me to make changes, however I could not save them to the existing file, or not even to a new name.
    I had to copy each layer on each page to create a new document.  NOT GOOD!!!  Just saw that ADOBE has an update for InDesign.  WILL THIS FIX THE PROBLEM??

    Yes, I would certainly get the latest update. That we often solve issues like these, for this is not normal. Some further tips would be quite InDesign, then to trash your InDesign preferences and then re-start InDesign (it will rebuild them again). Some further areas to look into would be:
    * Corrupt Font(s) (or corrupt font caches - see below)
    * Corrupt Image(s)
    * Power Failures (power surges)
    * Placing images via drag-and-drop from an Internet page
    * Working on an InDesign file over a network or on a remote server
    If all else fails, we as Markzware (I work for them) also offer a Service to fix corrupt InDesign documents. See:
    http://markzware.com/support/faq/recover-bad-file-service/
    Hopefully this helps you.
    David Dilling of
    Markzware

  • Help Viewer is an issue with InDesign CS6

    Would anyone happen to know if the Help Viewer is an issue with InDesign CS6? Even with a manual install the Help feature launches without issues the first time and won’t launch after the second time. This is the message we are receiving on Windows 7:
    “Help viewer is not installed check your internet connection and reinstall InDesign”

    Anup R. wrote:
    Can you try the option mentioned in 2nd para of the reply, if you are connected to internet?
    You can try changing the preference "General Settings" > "Display Local Help content only" to "No" so that application launches the online help content.
    -Anup.
    YES! It does help.Thank you very much. I changed the setting yesterday but side tracked before I see the online content works. So in general scope, yes it takes me to the online help center, which gives me options for more "community" answers. So yes, thank you for making me look further.
    However, I really was a fan of the local help that looked like and felt like the user manuals produced by Adobe, not just blogs, and more message boards. So I am still partially dismayed that I take the time to download and update the local help files, but can't use them. And wish Adobe would just fix the problem, so I can have immediate access to user manuals without having to surf all over for answers. Perhaps this is a novice thought, but I liked reading it in manual formats provided by the amnufacture of the software.
    Thanks again though for the help and it will just have to get used to this method. UNLESS you can tell me good news of something else I am missing?

  • Colour Management Issue with PS CS3 and Leopard 10.5.2

    Hi Everyone,
    Since I have installed Leopard I am having colour management issues with Photoshop CS3 and my Canon i9950 printer.
    My screen is calibrated with a Spyder and I used to ask Photoshop (in 10.4.11) to manage colour when printing and used the Spyder profile. Everything came out as I saw it on screen.
    Now in leopard when I do the same thing everything comes out too yellow on the print. If I ask Photoshop to let the printer manage the colour it is too red. If I use the default colour management (photoshop managing the colour and it choosing the colour space it is better, but still too yellow).
    Photoshop gives the hint to turn off colour management in the printer but there is no option for this and it also said the same thing before of course (when it worked in 10.4.11).
    Any ideas?
    Thanks.

    >It was working perfectly in Tiger with the monitor profile.
    You were lucky.
    the monitor profile is so Photoshop can display your images correctly.
    the working space is Adobe RGB, sRGB, BruceRGB, ect... these are all known color spaces so when the file goes to another computer there is a consistent color space for reference. If you use your monitor profile as a working space then nobody else knows what is going on with your file.
    when you print you need to use the printer profile for the type of paper you are printing on this is supplied by the printer manufacturer. you can also have custom profiles made.
    you need to read up on color management:
    http://www.gballard.net/psd.html
    http://digitaldog.net/

  • Colour Management issue With Leopard and PS CS3

    Hi Everyone,
    Since I have installed Leopard I am having colour management issues with Photoshop CS3 and my Canon i9950 printer.
    My screen is calibrated with a Spyder and I used to ask Photoshop (in 10.4.11) to manage colour when printing and used the Spyder profile. Everything came out as I saw it on screen.
    Now in leopard when I do the same thing everything comes out too yellow on the print. If I ask Photoshop to let the printer manage the colour it is too red. If I use the default colour management (photoshop managing the colour and it choosing the colour space it is better, but still too yellow).
    Photoshop gives the hint to turn off colour management in the printer but there is no option for this and it also said the same thing before of course (when it worked in 10.4.11).
    Any ideas?
    Thanks.

    You need to use the correct printer profile for the paper you're using. If the printer didn't come with any pre-built profiles, check Canon's web site to see if they have any profiles available for your printer that you can download.
    Printer profiles are very specific. You can't take take a profile for glossy Epson paper and expect it to work very well for Canon glossy paper.

  • Colour Management Issues with Leopard and Photoshop CS3

    Hi Everyone,
    Since I have installed Leopard I am having colour management issues with Photoshop CS3 and my Canon i9950 printer.
    My screen is calibrated with a Spyder and I used to ask Photoshop (in 10.4.11) to manage colour when printing and used the Spyder profile. Everything came out as I saw it on screen.
    Now in leopard when I do the same thing everything comes out too yellow on the print. If I ask Photoshop to let the printer manage the colour it is too red. If I use the default colour management (photoshop managing the colour and it choosing the colour space it is better, but still too yellow).
    Photoshop gives the hint to turn off colour management in the printer but there is no option for this and it also said the same thing before of course (when it worked in 10.4.11).
    Any ideas?
    Thanks.

    I'm having exactly the same problem, only my printer is a Canon Pixma iX4000. The colour is all bleached out, it looks exactly like when you've accidentally printed an RGB file on a CMYK printer, and at first I thought that was what I had done, but it isn't. This is very frustrating, I've spent all day going through the manuals, recalibrating etc, but no luck. This is a brand new Mac Pro and printer, but if its not going to print what I see on screen it's just expensive junk.
    I wasn't sure if the problem was Leopard or the printer or CS3...

  • MEDIA MANAGER ISSUES?? PLEASE READ BEFORE POSTING

    We have created several Media Manager specific threads for your issues that are "stickied" at the top of this board.  These are :
    Media Manager Installation Issues
    Media Manager Design Issues
    Media Manager Audio Playback Issues
    Media Manager Video Playback Issues
    Media Manager General (Other) Issues
    Please post your Media Manager issues in the correct corresponding thread so that our FSC employees can identify and begin to resolve some of the problems being experienced by our Media Manager customers.
    Thank You!!
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

    I can understand your point of view and I respect it in regards to Small Basic being a learning language. None the less, let me make a suggestion that would be more ageeable, I think,  to different kinds of people. Why not make different versions
    of this new language: version 1 for beginners that I heard would be out by the end of this year,
    version 2 for intermediates and version 3 for more advanced programmers. All this would culminate to the Visual Basic language. These 3 versions would smoothe out the gap between SB and Visual Basic. Your new programmers would
    evolve at the same time your versions would come out and Microsoft would have a long term policy of loyal programmers. 

  • Recent Media Encoder 2014 and Premiere CS6 Updates Fail

    For the past month or so the Media Encoder 2014 and Premiere CS6 updates are failing to install within the App Updater. The error message is U44M1P34.
    What's the solution?

    Here's an extract:
    12/19/14 07:11:50:073 | [FATAL] |  | OOBE | DE |  |  |  | 33680 | Payload 'Adobe Media Encoder CC 2014_8.0.1_AdobeMediaEncoder8AllTrial 8.0.0.22 {843B3BFA-BA88-4788-856E-1289F0846449}' information not found in Media_db.
    12/19/14 07:11:50:074 | [INFO] |  | OOBE | DE |  |  |  | 33680 | :: END TIMER :: [Total Timer] took 750.765 milliseconds (0.750765 seconds) DTR = 255.739 KBPS (0.249745 MBPS)
    12/19/14 07:11:51:075 | [INFO] |  | OOBE | DE |  |  |  | 33680 | -------------------------------------- Summary --------------------------------------
    12/19/14 07:11:51:075 | [INFO] |  | OOBE | DE |  |  |  | 33680 |  - 1 fatal error(s), 0 error(s)
    12/19/14 07:11:51:075 | [INFO] |  | OOBE | DE |  |  |  | 33680 | Win OS version: 6.2.0.0 64 bit Type: 1
    12/19/14 07:11:51:075 | [INFO] |  | OOBE | DE |  |  |  | 33680 |
    12/19/14 07:11:51:075 | [INFO] |  | OOBE | DE |  |  |  | 33680 | FATAL: Payload 'Adobe Media Encoder CC 2014_8.0.1_AdobeMediaEncoder8AllTrial 8.0.0.22 {843B3BFA-BA88-4788-856E-1289F0846449}' information not found in Media_db.
    12/19/14 07:11:51:075 | [INFO] |  | OOBE | DE |  |  |  | 33680 |
    12/19/14 07:11:51:075 | [INFO] |  | OOBE | DE |  |  |  | 33680 | Please search the above error string(s) to find when the error occurred.
    12/19/14 07:11:51:075 | [INFO] |  | OOBE | DE |  |  |  | 33680 | These errors resulted in installer Exit Code mentioned below.
    I'd attach the file but don't see how to do that in a reply.
    - Mark

Maybe you are looking for