Media Manager doesn't support Chinese character file name?

I've tried to add files to the library, but non of the files named with Chinese characters were able to add. It give me an error.

That's interesting - we'll have to check on that for you.

Similar Messages

Some chinese character file name not uploading in SharePoint Document Library?

Hi
Some Chinese character pdf file name not uploading in SharePoint Document Library. I am getting following error.
1. File not found error if i would upload using file browse option in Doc Lib.
2. Can't read from the source file or disk. if i would tried to copy and paste using "Open with explorer" options.
File name is "LA（未签署）.pdf"
Note: This file has been converted from "TIFF" to "PDF".
Thanks & Regards
Poomani Sankaran

Hi Poomani,
For troubleshooting your issue, please let's verify the followings:
Whether other pdf file which are not converted from "TIFF" and contain Chinese char could be uploaded into the SharePoint Document library.
Whether other pdf file which are converted from "TIFF" and don't contain Chinese char could be uploaded into the SharePoint Document library.
Please upload these pdf files into other libraries, compare the result.
Please check the log file to find more information about this issue. The path of the log file is:
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Media manager doesn't support network folders?

My XP Professional install has My Documents pointing to a network share. I wanted to have it pull in music from there so I could create ringtones, but it doesn't seem like that works. e.g. it doesn't find anything. I'm run into at least one other windows app in the recent past (sorry, don't remember which one) that didn't support this either. Is this a known limitation?

That's interesting - we'll have to check on that for you.

Media Manager doesn't work anymore

When I'm capturing and logging footage, Media Manager is part of my work flow. I capture the entire tape, then use the DV Start/Stop detect function to make subclips. Then I use Media Manager to create smaller versions of the subclips. I I log and archive the newly created compressed clips, and use them for edits.
But now with FCP 5.0.2, Media Manager doesn't work like it used to. The end result of outputting the subclips is one large clip. If I output half of them at a clip (1,3,5,7,9,etc.) and then go back and do the rest (2,4,6,8,10,...) it works. But what a pain. I've tried every variation of settings. Nothing make a difference.
What gives?
Also, the subclips all now have the first frame of the next clip stuck on the end. That's not Media Manager, it happens before. But it is not cool.
Anyone having similar problems, and any solutions?
-Daniel Cohen

Tom,
Here is the process:
Capture the entire DV tape as one long clip.
Use DV Start/Stop detection to create markers. (This results in that extra last frame from the beginning of the next clip.)
Make subclips from the markers.
Select subclips and go to Media Manager
Use Media Manager to Recompress
-Recompress media using OfflineRT NTSC (Photo JPEG)
-Delete unused media from selected clips.
-No handles (I want the clip as it was on the tape)
-Base media file names on clip names
-Select a media destination
And off it goes.
Instead of creating individual clips (at the slected location) it makes one long clip, like the source just smaller because it is now compressed.
In earlier version of FCP this worked. Something has changed in version 5.
I can trick the Media Manager by selecting every other subclip, outputting, and then going back and selecting the rest. But that is twice the work. And I still have those darn extra frames at the end of the clips.
Any ideas. (I have already done the Quicktime repair listed in many other threads.)
-Daniel Cohen

I have new Sony A77 M2 camera and adobe Lightroom doesn't support its RAW files. Can you help? I have LR 5.4

I have new Sony A77 M2 camera and adobe Lightroom doesn't support its RAW files. Can you help? I have LR 5.4

You will likely get better program help in a program forum Photoshop Lightroom
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Media Manager doesn't work

I have a Blackberry 8330 (CDMA) v4.50.191 (Plaform 3.4.0.62).
The Blackberry desktop manager is v4.5
The Media Manager doesn't work.
when I click on the icon for it, the window gets a grayish tint -- like it's going to do something -- but then it returns to normal and nothing happens.
I am trying to download photos I took with my Blackberry camera to my computer.
Can anyone tell me some recommendations on how to download them and/or repair the Media Manager?
Thanks,
Sharlene

Hello,
My advice, skip the Media Manager and instead use Mass Storage Mode:
KB11879 What is mass storage mode
With that, you can work with your BB memory area(s) as USB drives on your computer, and use your normal computer interface to do so.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Why can't I import clips with foreign character file names?

What the **** man?
I've got a series of clips with foreign character file names that FCP will not let me access via the Import->File method. Some of the offending character sets include Chinese, Arabic, and a couple of less well known Unicode sets like Cherokee and Inuktitus.
What's interesting is that I can easily drag the clips onto the TL manually via Finder, but not File->Import. Also, XML passed to FCP that includes foreign character file names is ignored. Seeing as FCP is an Apple product I would have expected proper Unicode support 4 years ago.
Obviously I don't need a workaround per se... But I'd very much like to know why this is the way it is. We're developers doing development work for FCP so it's important for us.

We're developers doing development work for FCP so it's important for us.
Then you have a more direct path to the FCP engineers than this forum. Send them feedback directly. This place is user to user - no apple employees are officially here.
good luck.
x

VCast media manager doesn't run under W7 64-bit

How do I download music to my new Droid 2. When I tried to install Vcast Media Manager, it aborted because it does not support 64-bit OS.
I'm not interested in having a 32-bit OS just to support one application.
Thanks
<Chas>

I have a 64-bit OS on my Laptop, as well, and experienced the same message.
I noticed that when I first plugged my phone into my PC the Windows Explorer came up and allowed me to browse my entire Droid 2 files. But, after allowing Motorola to continue to install the "needed" drivers/software, I was no longer able to browse my phone with Windows Explorer. So, I uninstalled the two Motorola files that install whenever I plug my phone into my PC, and viola! the Windows Explorer works again.
Therefore, the solution for moving files back and forth from your PC to your phone is to not use the VCast Media Manager and just use the Windows Explorer that defaults when you first plug your phone into your computer USB port. When prompted to allow Motorola to modify your computer, say "no". By doing this, your phone won't go to the Verizon Website and block your ability to use the Windows Explorer from there on out.
You'll need to say "no" everytime you plug your phone into your PC, but at least you'll have the file management needed.

Vcast Media Manager -- where is support for 64-bit windows computers??

I purchased a Droid 2 in October, when I plug it into my computer it brings up Verizon Vcast Media Manager page to download that program (which is good because I want to get my music onto my phone from my desktop computer). But only after download attempt does it tell me that said program will only support a 32-bit operating system. Well, I, my wife, and a lot of other people have a 64-bit operating system. Is Verizon really that far behind the times? Seriously has no one noticed this, a 32-bit machine is outdated these days. Why can i not hook my Droid up to my puter, I thought this was smartphone technology... Maybe the phone is smarter than Verizons Programmers?? To VZW, please correct me if I am wrong, or fix the problem if I am correct.

Currently there is no 64bit version available at this time, and no ETA to when one will be available. I would recommend as an alternative using the Droid 2 as a mass storage drive to transfer music. I have included the instruction in an article below:
http://support.vzw.com/clc/devices/knowledge_base.html?id=34780
If it still does not recognize it as a device, try putting it in USB debugging mode. Instruction article given below:
http://support.vzw.com/clc/devices/knowledge_base.html?id=31366
***As long as a memory card is present in the device, it will show up as a drive on your personal computer. Once it shows up as a drive, you can drag and drop music and media files on the Droid 2.

My 7100 is telling me it doesn't support a aac fil...

I don't get it. Looking at all available info, my 7100 should support aac files. It appears all my ringtones are aac fies. Even sound recordings I have made are aac files. But I downloaded a song in aac format from Vodafone and when I tried to open it, my phone is telling it doesn't support this file format. What the deuce??? Please help.

Thanks people. It's been a week and no responses.

I want to print file labels but the avery ap doesn't support their own file labels. Any other way to print file labels from ipad?

I want to print file labels but the avery ap doesn't support file labels, is there ant way to print file label from an ipad?

You cannot save to Dropbox from Pages natively, but there is a workaround that allows you to use the Copy to WebDAV to get things to Dropbox:
http://techinch.com/2011/02/02/integrate-dropbox-with-pages-keynote-and-numbers- on-ipad/
As to the "Send to iTunes" command "not playing ball", if you'll post specifics, perhaps someone can help you sort that out. It should be pretty straightforward.
Regards.

Roxio Media Manager doesn't work

So I installed the software that came with my blackberry 8330 curve. I open the desktop manager and try to open the media manager and I get a popup that says the following:
[quote]The certificate file is missing or has been corrupted. Please re-install it. {/quote]
And won't let me add music to my blackberry so I can listen on the bus. This is a fresh install of the software from the cd that came with my crackberry, so unless it's corrupted on the cd, I don't see how it can be corrupted.
PLEASE help. I just want to be able to put my music on my phone.
Solved!
Go to Solution.

I have been advised by others on this forum to use DM ver 4.6 WITHOUT Media Manager as that is the best version for the curve. 4.7 was released for the Storm and other users have experienced problems with it on the curve. These are the steps I followed:
1. Make sure you back up your device first.
2. Uninstall the Desktop software through the Start - Settings - Control Panel - Add/Remove Programs - Blackberry Desktop Software - Uninstall
3. Then empty the recycle bin, restart your computer and go to Blackberry.com - Software - Blackberry Desktop Software for PC's - Download - DM 4.6 without Media Manager.
4. Download and install DM version 4.6 without Media Manager.
Once that has been installed, use 'drag 'n drop' to copy your music from your pc to the music folder on your BB. Do this in Windows Explorer or 'My Computer' or whatever you call it. Also, any DRM files will not play on the BB, I believe this is because of the digital righs issue on music files.
Hope this helps. Be patient and keep coming back as someone is always here to help
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Roxio Media Manager Doesn't Detect Device

My computer runs Vista Business and I have 8130 Pearl. I don't understand why the software isn't recognizing the device, please help!

I have been advised by others on this forum to use DM ver 4.6 WITHOUT Media Manager as that is the best version for the curve. 4.7 was released for the Storm and other users have experienced problems with it on the curve. These are the steps I followed:
1. Make sure you back up your device first.
2. Uninstall the Desktop software through the Start - Settings - Control Panel - Add/Remove Programs - Blackberry Desktop Software - Uninstall
3. Then empty the recycle bin, restart your computer and go to Blackberry.com - Software - Blackberry Desktop Software for PC's - Download - DM 4.6 without Media Manager.
4. Download and install DM version 4.6 without Media Manager.
Once that has been installed, use 'drag 'n drop' to copy your music from your pc to the music folder on your BB. Do this in Windows Explorer or 'My Computer' or whatever you call it. Also, any DRM files will not play on the BB, I believe this is because of the digital righs issue on music files.
Hope this helps. Be patient and keep coming back as someone is always here to help
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Support Chinese Character

Hi,
I have some problems on handling Chinese Character.
I pass Chinese words to CFC and then do the SELECT search in DB. However, I find it cannot find Chinese words correctly.
When I try to prompt ( alert(#trim(URLDecode(search_tenderee_name))#) ) the wordings retrieved in CFC, it shows me incorrectly word.
I use the following method to call CFC:
ColdFusion.navigate('cfc/control.cfc?method=loadNameListSelection&search_name='+escape(doc ument.getElementById('search').value),'tableList');
Can anyone help me to solve this problem?
P.S. I have also tried:
ColdFusion.navigate('cfc/control.cfc?method=loadNameListSelection&search_name='+document.g etElementById('search').value,'tableList');
alert(#trim(search_tenderee_name)#)
It also cannot prompt me the correct Chinese Character.

no you can't if you have a US variant it has a language pack specific to north american region. you might be able to go to nokia care and ask them to install a language pack with Chinese language but make sure it also has other languages that you are likely to use . also it will cost you as it is not standard to switch language packs
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Bought the DLSR Sony a33, but now Aperture 3 doesn't support my RAW-Files.

Does anyone know how long Apple wait to support new RAW-Files?
Thanks,
Kirkemen

The Sony SLT - A33? That should be supported by Aperture 3.
http://www.apple.com/aperture/specs/raw.html
Oh wait, I see. Is that a just released camera?

Media Manager doesn't support Chinese character file name?

Similar Messages

Maybe you are looking for