Meeting Place and Webex Call Back Failing

Hi
Meeting place 8.5 with WebEx scheduling, SIP trunk to CUCM 8.5.
Calling in using the specified number configured in call manager completes over the SIP trunk however call back from webex fails.
Error:
WebEx call back failed; no answer.
Problem is I never recieve a call. I have enabled Webex call backs in webex.
Seems like there is an issue on either MP or CUCM.
Just looking for some ideas as I am stumped.

This turned out to be a few things:
1) I needed to configure a SIP proxy to CUCM from meeting place. This was the CUCM IP address and TCP port number.
2) The SIP trunk security profile needed to be reconfigured for this trunk.
3) E164 was being used so I created a translation pattern to strip the + for the CSS associated with the RP.
A few things learned along the way.
1) The "activity" command ran from a SSH prompt with allow you to simulate a call from meeting place. Option 4, enter the number to dial and "f" for port.
2) In meeting place - Services -Logs - System Information Capture - Loading the index file and under the CCA SIP LOG is the error being returned by CUCM. In my case it was Warning: 399 CSLCCM1 "Unable to find a device handler for the request received on port
3) Command "cptrace" again from the SSH prompt will allow you to view the digits being sent from webex to meeting place.
I hope this information helps someone...

Similar Messages

Meeting Place 8.5 Calling Webex participants for Audio

I have MP8.5 intergration with Webex and Users are managed by Webex.
The Application Server is set up for Audio only. Users are synced up with Webex.
MP is set up as the audio controller for WebEx meetings.
Users that log into Webex for a meeting are asked to either dial in or have WebEx do a call back using the MP AS.
Users who dial in get to the MP AS and can be seen using the audio, Audio meeting works fine. Users who try and use WebEx call back are not getting called. When users are asked to put in their call back number the Webex prompt is forcing USA (or anyother dial plan) and this is causing a "1" to be prefixed to the number the user wants called. The MP AS is integrated with a CUCM across a SIP trunk. The internal users all have to dial "9" to access a outside line.
I have two questions.
How do I force the Webex to stop prefixing the "1" to numbers it is calling?
When the AS tries to call out to users, how do I get it to prefix a "9" so it can dial out of my system?
As always any help will be greatly appreciated. Thanks

Hello,
I have the same problem.
I cannot make internal call-back (to my Directory number) from the WebEx
There are some countries (including mine) that are not in the WebEx call back menu, even if I have control of the my MP and CUCM.
And the E164 is ot fullfilled. If i want to call another number.

Cisco Meeting Place and Unity

Can anyone tell me where I can find a good book on how to administer Cisco meeting Place and Unity? Thanks.

This works on your voice network. There is a centralized server usually located in the same location as your CUCM with a SIP connection between the two. Bandwidth requirements are the same as a phone call. If you are using G.711, then 60K+ per call. Each participant calls into the system on either an internal number or on a PSTN line with a dedicated phone number(s). The enter the meeting ID and are in the meeting. Beside scheduled meetings reservationless is also supported. The MP Application Server handles managing the voices in a meeting and is the only server required.
MP runs on specific MCS server listed below and won’t install/be supported on other MCS servers.
MCS 7845-I3-RC2 Dual Intel E5540 2.53 GHz, 4x300 HDD, 8GB RAM
HP equivalent: DL380-G6 Server, part number AX693A
MCS 7845-I2-RC2 (end-of-sale 12/09) Dual Intel 5140 2.33 GHz, 4x146GB HDD, 4GB RAM
MCS 7845-H2-RC2 (end-of-sale 7/09) Dual Intel 5140 2.33 GHz, 4X146 GB HDD, 4GB RAM
HP equivalent: DL380-G5 Server, part number 470064-887
MCS 7835-I3-RC1 Single Intel 5504 Quad-core 2.00 GHz, 2x146 HDD, 4GB RAM
HP equivalent: DL380-G6 Server, part number AX690A
Note: The MCS 7835-I3-RC1 does not support multinode deployments.
The following URL (http://www.cisco.com/en/US/products/sw/ps5664/ps5669/tsd_products_support_series_home.html) is the location of a lot of the MP documentation.
Hope this helps.
John

Re: Forte and OrbixWeb call-back

We have created a business process manager (BPM) layer between our client GUI
and business model objects that supports Java call-in/call-out. This enables
switching out the Forte windows with Java windows for a web solution with
minimal code re-write.
We were able to get most functionality to work as per our design, which
included registering a call back function from a Java GUI in the BPM, but had
to make some sacrifices due to a Forte bug, at least under 3.0.D. We turned
in case #38434, detailing errors when we tried to fire a callback method with
parameters, example below ("callback" was the Java object passed in.)
method TestIIOPBackend.FireCallback(input message: Framework.string)
begin
if callback != nil then
task.part.logmgr.putline('Firing callback');
//WORKS
callback.CallMe();
//ERROR!
callback.CallMeString(message);
else
task.part.logmgr.putline('Callback not set');
end if;
end method;
This may have been fixed in 3.0.F, we found a way to work around it in our
design and haven't investigated since.
-DFR
Ngai* Stuart <[email protected]> on 01/20/98 09:14:28 AM
To: '[email protected]' <[email protected]> @ INTERNET
cc:
Subject: Forte and OrbixWeb call-back
Has anyone actually tried the tech note 11153 "Java call-in/call-out and
Forte
Anchored Objects"? I'm trying to verify the callback mechanism from
Forte to
an IIOP Java client. Thanks.
<<< Stuart Ngai (416)359-4306 [email protected] >>>
------ Message Header Follows ------
Received: from pebble.SageIT.com by notes.bsginc.com
(PostalUnion/SMTP(tm) v2.1.9c for Windows NT(tm))
id AA-1998Jan20.101336.1771.787915; Tue, 20 Jan 1998 10:13:36 -0600
Received: (from sync@localhost) by pebble.SageIT.com (8.6.10/8.6.9) id HAA03868
for forte-users-outgoing; Tue, 20 Jan 1998 07:25:41 -0800
Received: (from uucp@localhost) by pebble.SageIT.com (8.6.10/8.6.9) id HAA03862
for <[email protected]>; Tue, 20 Jan 1998 07:25:39 -0800
Received: from keeper.nesbittburns.ca(192.139.71.50) by pebble.sagesoln.com via
smap (V2.0)
id xma003860; Tue, 20 Jan 98 07:25:19 -0800
Received: from NesbittBurns.ca (tds223.nesbittburns.ca) by
keeper.NesbittBurns.ca (4.1/SMI-4.1)
id AA22591; Tue, 20 Jan 98 10:23:47 EST
Received: from nbtormail02.nesbittburns.ca by NesbittBurns.ca (5.x/SMI-SVR4)
id AA12961; Tue, 20 Jan 1998 10:26:54 -0500
Received: by nbtormail02.nesbittburns.ca with SMTP (Microsoft Exchange Server
Internet Mail Connector Version 4.0.995.52)
id <[email protected]>; Tue, 20 Jan 1998
10:27:52
-0500
Message-Id:
<c=CA%a=_%p=Nesbitt_Burns_In%[email protected]>
From: "Ngai, Stuart" <[email protected]>
To: "'[email protected]'" <[email protected]>
Subject: Forte and OrbixWeb call-back
Date: Tue, 20 Jan 1998 10:27:39 -0500
X-Mailer: Microsoft Exchange Server Internet Mail Connector Version 4.0.995.52
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Sender: [email protected]
Precedence: bulk
Reply-To: "Ngai, Stuart" <[email protected]>

Peggy,
1) Do you have experience with PowerBuilder and Forte' applications running at
the same time on the same (laptop) computer? Here I'm thinking
about any potential resource constraints? Memory Requirements?As log as you are using Win95 or NT you should not be concerned about WIN-resources. Memory depends more on what your 2 tier PB application requires than what your Forté would require.
Cheers,
Troels
Lindhard Forté Solutions
-----Original Message-----
From: Peggy Lynn Adrian [SMTP:[email protected]]
Sent: Thursday, January 15, 1998 10:31 PM
To: [email protected]
Subject: Forte and Powerbuilder Experience Needed
I sent this query to Forte support but maybe someone out there can help me
with practical experience
with the following?
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 01/15/98 04:30
PM ---------------------------
Peggy Lynn Adrian
01/14/98 03:55 PM
To: [email protected]
cc: Peggy Lynn Adrian/AM/LLY@Lilly
Subject: Forte and Powerbuilder Experience Needed
1) Do you have experience with PowerBuilder and Forte' applications running at
the same time on the same (laptop) computer? Here I'm thinking
about any potential resource constraints? Memory Requirements?
2) Can PowerBuilder and Forte' applications call and interact with one
another?
The Forte' application will need to interact with the PowerBuilder application
to pull out information maintained by the PB application.

My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

If FaceTime ever worked properly for you, restarting your modem (and separate router/wireless if you have such) may help. If the problem continues, try connecting at a different location to see if the problem is within your wi-fi.
The black dot problem may mean you need to reset your iPod. If that does not help, it may need service by an Apple Authorized Service Provider.
If you need help with any of these suggestions, detailed help on each topic is available via Apple's Support pages:
http://www.apple.com/support/ipodtouch/
Message was edited by: EZ Jim
Mac OSX 10.7.3

Forte and OrbixWeb call-back

Has anyone actually tried the tech note 11153 "Java call-in/call-out and
Forte
Anchored Objects"? I'm trying to verify the callback mechanism from
Forte to
an IIOP Java client. Thanks.
<<< Stuart Ngai (416)359-4306 [email protected] >>>

This turned out to be a few things:
1) I needed to configure a SIP proxy to CUCM from meeting place. This was the CUCM IP address and TCP port number.
2) The SIP trunk security profile needed to be reconfigured for this trunk.
3) E164 was being used so I created a translation pattern to strip the + for the CSS associated with the RP.
A few things learned along the way.
1) The "activity" command ran from a SSH prompt with allow you to simulate a call from meeting place. Option 4, enter the number to dial and "f" for port.
2) In meeting place - Services -Logs - System Information Capture - Loading the index file and under the CCA SIP LOG is the error being returned by CUCM. In my case it was Warning: 399 CSLCCM1 "Unable to find a device handler for the request received on port
3) Command "cptrace" again from the SSH prompt will allow you to view the digits being sent from webex to meeting place.
I hope this information helps someone...

Meeting place and SRST feature

Hi all,
I am new to Voice communication. So, i need help from you guys.
One of my customer one to have cisco Meeting place express on their premises. Basic requirement is -
i) Voice, video and document sharing
ii) PSTN and PABX integration with the solution [SRST feature]
Can you share design and BoM?
Thanks i advance.
Russell

MeetingPlace Express is end of sale and cannot be ordered any longer.
Also, this is not the correct channel for sales/BoM assistance. You need to work with Cisco Presales assistance and/or your Cisco AM if you require assistance on that front.

Meeting Place 8.5 Authentication users fails

Hi all,
My customer have installed The Meeting Place 8.5 and have problem whit the authentication of the users.
They have configured the Directory Service, for import users and use the Meeting Place Conference manager to Schedule the Meetings.
When try to intro to the Conference Managers with a Directory Service user, receive an error "Wrong user ID and password combination"
The user Profile exist in the MP.
I attach some screens.
Please I need your help.
Thanks a lot
Guillermo

Hi Guillermo,
MeetingPlace Conference Manager is meant for users with Attendant or System Manager privileges on the system. Regular End users are not allowed to use Conference Manager and shouldn't be allowed. The same is observed when trying to log in to the Administration Center web interface of MP Application server. Only local user profiles can log in.
Is there a reason why the end users don't use MeetingPlace Outlook plug-in to schedule meetings via their Microsoft Outlook clients?
Here you can find more information about Conference Manager: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/meetingplace/8_5/english/books/admin_doc_compilation/mp85_admin_documentation/meetingmanager_install.html
As for scheduling via Outlook, you can find more information here: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/meetingplace/8_5/english/books/admin_doc_compilation/mp85_admin_documentation/outlook_integration.html
I hope this will help.
-Dejan

No profile images, and all calls keep failing

Title says it all.
When I sign into skype on my xbox one, none of my contacts profile pictures load in.
Then when I try to make a call to anyone it says is online, the call trys for a bit and then fails.

Same problem here after the iOS 8 install and subsequent update. 2007 Lexus ES 350. Also, USB connectivity problems with other car stereos.
There is also another thread with the same issue: Re: Why does Siri bluetooth connection in 2008 Toyota Prius with iOS 8 terminate outgoing call with message "call terminated by network" on Prius screen
Apple Support - ARE YOU LISTENING?

TS2776 I can't find an e-mail address for Apple Support. I spoke to an Apple Support Advisor named Barbara, on July 7th (over a month ago) and she said Apple was "working on my problem and would call back". Help!!!!

See above
<Title Edited by Host>

There is no email address for Apple Support, since Apple does not provide support via email (except for the iTunes Store). You will need to call Apple support and ask for further assistance.
By the way, everyone here is just a fellow user, so posting any personal details here including case numbers is a bad idea.
Regards.

Is it possible for high humidity to brake the backlight to an ipod or ipad because they were both just sitting on the counter in the same place and now the back light wont work.

?

Yes it is possible for high humidity to damage the iPod/iPad. Try drying the devices in a sealed container with uncooked rice for five days or do. Change the rice daily.
The try restoring the iPod.
Is still it does not work then have hardware damage.
See if the visible liquid indicator show liquid contact.
iPhone and iPod: Liquid damage is not covered by warranty

Question in Cisco Unified Meeting Place 8.5 with Webex integration

Greetings,
Let us say that I have the following requirements for fresh installation:
UCS C210-M2
CUWL-Pro for users (700 users)
CUCM 8.6
Cisco unified Meeting Place 8.5
My concern is about Meeting place; one of the requirments is to order Meeting Place 8.5 for local (on-premises) audio conferencing, and use Cisco Webex (cloud) for Web & Video conferencing.
I have the following questions:
- What part numbers should be ordered for meeting place and Webex?
- CUWL-Pro comes with Webex ports included, can use those ports?
Thanks in advance..

Hi Anand,
For MP 8.5 new setup, you don't need a web server. Web server is an optional component only when you are upgrading the system from earlier MP releases.
If you are installing Webex node, it needs to be on a seperate MCS server (however, this is an optional component).
Application server and Express Media Server require only one UCS server if this is single node deployment.
Hardware requirements for application server and Webex node can be found in the following documents:
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_Hardware_Requirements#Application_Server_Requirements
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_Hardware_Requirements#Cisco_WebEx_Node_Requirements
The complete information about MP 8.5 requirements:
http://docwiki.cisco.com/wiki/Category:Planning_for_Cisco_Unified_MeetingPlace_Release_8.5
HTH,
Natasa

Jabber and webex integration

Hello everyone,
We're trying to integrate meeting place and webex with our presence service to allow Jabber and CUP users to use all of the available features we have.
We're having some issues to get webex up and running because we're getting a "The WebEx meeting account is invalid" message everytime we try to access from jabber.
If I go to meeting center I can successfully log in using the same credentials I'm using on jabber so I don't understand why it says the account is invalid.
This issue happens for all of the users. Have anyone seen this behaviour already?
Thanks!!

We use Meeting Center rather than Meeting Place but I think the authentication is similar. The problem I had was since we use Meeting Center (cloud WebEx) and do not use SSO the accounts are different. Once the Not Set "Source for Web Conferencing" was configured, I was able to goto the client (Mac Jabber 8.6.2 in this case) and enter my credentials in Preferences -> Accounts -> Meetings

Meeting place external calls

Hi,
We have configured meeting place with webex-node.
When internal users join the meeting we can hear eachother.
When an external user calls the ISDN number he hears all the messages from meeting place, he gives the meeting ID and after that he should hear the waiting room music, or be joined in an existing meeting, but he hears nothing.
When a meeting of some internal users is place, we can hear that meeting place anounces that user XYZ joins the meeting. XYZ being the name that external user has given. But external user can not hear anything, and internal users can not hear external user. When external user hangs up, meeting place says that user XYZ has left the meeting.
It seems that the stream of exteranl user is not mixed with the internal users.
any idea?
thanks,
JH

Something goes wrong between Meeting place/Callmanager/Voice gateway
Voice gateway uses H323 to Callmanager
Meetingplace uses SIP to Callmanager
Solved problem by creating a SIP dial-peer on voice gateway pointing to MP
JH

Meeting Place Configuration Doc

Hi
I am configuring Meeting Place 8.5. Can anyone please provide me Meeting Place 8.5 basic configuration guide. I have the cisco guide with me. I have created sip trunk in cucm and done basic configuration in Meeting Place server as per cisco guide. But when I test calling meeting place number, the call gets disconnected. Something somewhere I have missed. I have successfully imported the users to the meeting place server. Thank u.

Hi,
Are you using EMS or HMS? Can you make sure you have correct configuration on SIP trunk (CUCM side) and make sure on MP you have configured the correct CUCM configuration under SIP config.
Login to your MP as root and see check below:
1. cd /var/mp
2. ls -l
and see if you see cca directory or not? If not then looks like you configured the MP for HMS but you don't have hardware MCU or possibly MCU is not online or not configure properly.
If you see above directory do below:
cd /var/mp/cca
tail -f tvsip* | grep -e '--'
make a test call and you will see sometihng on your screen, capture the whole stuff and post here will look tell you what's going on but if you don't see any calls coming that means call is not even landing to MP then check your CUCM for possibly PT, CSS, RP, RP, Trunk etc.
Please let me know if you need any more info.
If you need immediate assistance kindly open a TAC case.
HTH
Arun

Meeting Place and Webex Call Back Failing

Similar Messages

Maybe you are looking for