Meeting Workspace Link in Outlook does Link to Correct Date

We use meeting workspaces frequently to manage meetings and we typically connect them to a Outlook recurring meeting.  In the past when you opened up the Outlook recurring meeting and clicked on the link it took you directly to the meeting workspace
instance of that date.  But, now it no longer links correctly and it does not create a unique instance id for each instance on the Outlook calendar.  Any thoughts on what would change in SharePoint that I doesn't allow Outlook to link to a specific
meeting workspace date?

Hi johnsonsrun,
i looked for some articles regarding this, perhaps you may try:
http://www.lockworldherald.com/thewebforyou/2013/03/01/sharepoint-troubleshooting-meeting-workspaces-are-not-saving-date-specific-information-to-the-correct-date/
if for example, that you did upgrade from 2007 to 2010 environment, then the links may be broke when the upgrade process, and perhaps it may not be recoverable, to solve this issue, is to update the date for each meeting workspace that having the issue,
or create new meeting workspace.
http://support.microsoft.com/kb/2312523/en-us
http://office.microsoft.com/en-in/sharepoint-workspace-help/setting-and-updating-recurring-meetings-HA010286868.aspx
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

  • Calendar Recurring meeting Meeting workspace link disappears

    I established a recurring meeting, and set the parameter to establish
    a meeting workspace for each meeting. Prior to editing the meeting,
    the meeting workspace link appears on the meeting properties page
    (linked through the calendar.) Once I edit the meeting notes, the
    link disappears, however if I go into "edit" it then reappears.
    I also changed the date on one of the recurring meetings to be the correct date since the
    user changed the date for that meeting. An interesting thing happened. On the calendar webpart
    the link is shown below.
    dispform.aspx?id=3
    If I clicked into the calendar and highlighted the same meeting the link is this:
    dispform.aspx?id=3.1.1
    I cannot figure out why it is showing on one and not the other when the fields selected in
    the view are the same. The 3.1.1 link show the meeting workspace link, the link with just the 3
    does not. Is this a bug? Did I do something wrong?
    Sharepoint is not integrated with Outlook.
    I am using WSS 3 with SP2 on a Windows 2003 server.
    Any help is greatly appreciated!
    coustack

    I have the same issue with similar symptoms, and wonder if there is any update. We are using SharePoint 2010. We have a meeting recurrence set up with a meeting workspace, and the calendar is sync'ed to SharePoint. One of the meeting dates changed, so I
    used Outlook to update the meeting time:
    > the meeting workspace updated and shows the correct date
    > the "ID" number shows "ID=10" on the calendar web part, and "ID=10.1.8" on the actual calendar view (this is the same as the original post say "3" on one view and "3.1.1" on another view.
    > Some users are able to see the hyperlink to the Meeting Workspace from both the Web Part and the Calendar views, while other users are unable to see the link from the Web Part view. In other words, clicking on the Meeting link in a calendar web part
    opens a page with all the meeting information, except the "Workspace" row is simply blank where the link should be.
    >> I set it all up, and I do not have the problem in IE (ver 10)
    >> my boss who has the same level permissions does not have the problem in either IE or Chrome.
    >> my coworker (who has slightly reduced permissions) is unable to see the link in the webpart in IE
    >> my client (with reduced permissions) is unable to see the link in the Web part using IE.
    So, this issue seems to be tied to the changing a meeting date after the recurrence and workspaces are both created. It may also be tied to permissions or browser version/settings. I agree with the "answer" in that accessing the information from
    the calendar view seems to work OK for all users in all browsers. I wanted to post this to track that the issue is not happening for all users, which suggests that there are other factors involved. I looked at this using 5 different profiles, and found only
    2 (one internal user and one external user) experiencing the problem. So, I question why this works OK for 60% of users, but not the other 40%. It makes me think that this could be fixed through a setting, either in the browser or the user profile. The "answer"
    was also provided ~6 years ago, so I wondered if there was updated information at this time.
    Thanks!
    Matt

  • Cannot create a Sharepoint meeting workspace in a Outlook 2010 meeting request

    I am using Sharepoint 2010 and Outlook 2010. I am trying to create a meeting request and also create a sharepoint workspace attach to that meeting request in Outlook.                           
    First I click Create button and then it would let me choose a location for the workspace server in a drop-down box. I chose "other...". After I input my sharepoint site URL in the Workspace Server, Outlook does not recognize the address and a windows
    popup saying "The operation could not be completed because of a problem found on the server or the server could not be found."
    I checked the thread below and it doesn't solve my problem at all.
    There is no reason why this should not be working.  I also created a meeting workspace in sharepoint, and can't even link it to an outlook meeting request when pasting the direct link from the browser.
    Did Microsoft break this and forget (or not care) to tell anyone?
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/64ebe619-c3e3-4d20-8f67-138aa65dfb71/cannot-create-a-sharepoint-meeting-workspace-in-a-outlook-2010-meeting-request?referrer=http://social.technet.microsoft.com/Forums/sharepoint/en-US/64ebe619-c3e3-4d20-8f67-138aa65dfb71/cannot-create-a-sharepoint-meeting-workspace-in-a-outlook-2010-meeting-request?referrer=http://social.technet.microsoft.com/Forums/sharepoint/en-US/64ebe619-c3e3-4d20-8f67-138aa65dfb71/cannot-create-a-sharepoint-meeting-workspace-in-a-outlook-2010-meeting-request?referrer=http://social.technet.microsoft.com/Forums/sharepoint/en-US/64ebe619-c3e3-4d20-8f67-138aa65dfb71/cannot-create-a-sharepoint-meeting-workspace-in-a-outlook-2010-meeting-request?forum=outlook

    Hi,
    I found a similar thread and someone posted a solution:
    http://community.office365.com/en-us/f/154/t/735.aspx
    I've quoted the solution and you can try if this fits your scenario:
    The issue with Outlook not being able to find a Meeting Workspace is usually due to authentication not being passed correctly. Adding Trusted Sites information to Internet Explorer lets the browser know to allow the authentication to pass.
    Open Internet Explorer
    Go to: Internet Options -> Security -> Local Intranet -> Sites -> Advanced
    Add:   *.sharepoint.com ,  *.microsoftonline.com  ,  *.lync.com   ,  *.outlook.com
    Click Save
    Then go to Internet Options -> Security -> Trusted Sites -> Sites
    Add:  https://*.sharepoint.com  , 
    https://*.microsoftonline.com  , 
    https://*.lync.com  , 
    https://*.outlook.com
    Click Save
    Close Internet Explorer
    Open Internet Explorer
    Goto login.microsoftonline.com and sign in, make sure "keep me signed in" is checked.
    Go back to outlook and the meeting workspace button will work now.
    Note Since you are using Sharepoint 2010, in the example above it's SharePoint Online, the URL you need to add is your own SharePoint Site URL. Also login your own page as you should not be using login.microsoftonline.com.
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Webi does not pick correct Data

    Hi Guys,
    I have a webi. The Universe for the Webi is based on  Bex Query. I see correct Data in Bex Query but when I create a webi report it does not pick correct data.
    I have checked following points already:-
    1] No Resstriction at Query Level
    2] No restriction at Universe Level
    3] No Filters/ Restriction at Webi Level.
    Can anyone suggest whats happening?
    Regards

    Hi Ray,
    It happens sometimes that data gets aggregated over all the dimension objects present in the 'Available Objects' section in webi.
    Try to pull only the characteristics present in the row section of the bex query say 'X' and measure in the column section of bex query say 'Y' into the results pane in the edit query window in webi.Then run the report and check.
    This will give you the idea about aggregation.
    Regards
    Vineeta

  • Discoverer Report opened from Portal does not show correct data

    Hi,
    When I try to open a Discoverer report from a portal that I created, it shows stale data but when I click on "Analyze", it shows all the data correctly.
    Does anyone know what the reason could be for this?
    Thank you,
    Santoshi

    I assume you used the Discoverer Portlet Provider. A discoverer portlet is never live data. When you define the portlet you specify how often to 'refresh' the data. If you skipped this step, then you just get the data as-of when you created the portlet.
    Generally you specify the refresh time to be sometime after your usual database load completes.

  • LastDataRefresh(ROLLUPTIME)-does not show correct date for multiprovider

    Hi,
    The Last data refresh (Rolluptime) shows incorrect date for multiprovider and we use lot of multiproviders.
    Removing the last data refresh from the "Information" button of the Bex Web Analyzer which is using the "Information field web item",  shows an empty space and a colon ":" and an empty box.
    Please let me know if there is any other way to remove the last data fresh without showing the empty space.
    We are on SPS 7 and FEP 7. Is this problem still exist in SPS 8/FEP 8?
    Thankyou,
    -Sini
    Message was edited by: Sini Kumar

    Depends on your definition of correct. Your initial question was that this time does not display. This time should display. For a multprovider, it uses this formula
    first(last(<All InfoProviders under Multi - ROLLUPTIME>))
    It uses the earliest rollup time from the last rolluptime of all the base providers.

  • Report refresh does not contain correct data

    Hi all,
    I'm having a problem with an interactive report. this report contains checkboxes for each row.
    When clicking the submit button, a process is called which changes the status of the checked records.
    This status change should cause the IR to not query these records anymore after the submit, but they still appear even though i did a commit after the proces.
    When i refresh the page the correct records are removed from the report.
    Is this normal because i thought the page processes are completed before branching is executed.
    Grtz,
    Mario

    my mistake, i was doing a query with sysdate in the where clause, but when using systimestamp this problem was solved.

  • Export to PDF from Infoview does not show correct data - CRS 2008

    I have a problem where users attempt to export a report from the Infoview interface to a PDF.  The report shows correctly in Infoview while in Crystal Reports format, but when the use exports the data, the data changes and shows different values.  To troubleshoot, I have tried this on different clients - without a change in the result.  I have also pulled the latest instance of the report from this history on the Central Management Console.  Interestingly enough, the same thing happens when I export to a PDF from there as well.  Any insight or help would be greatly appreciated.  Thanks!

    Hello,
    I can't tell you offhand on what the issue is here, as various factors come into play.
    Here are a few troubleshooting steps you can try:
    - Try opening the report in Crystal Report designer and export to pdf from there. Does this work?
    - Instead of viewing the report and export; schedule a report to PDF and check the results.
    - there is currently a know issue in regards of certain formulas and using font type "arial Unicode MS" that gives incorrect export to pdf. Maybe alter the font used.. or see if you take out any questionable formulas and try again to export.
    Regards,
    Duncan

  • Timestamp when saved in text file and reloaded does not give correct dates

    Hello
    I am struggling with time stamp. I have almost corrected the problem but it is not as good as I expect it to be.
    I have data in the main vi which logs into text file with time stamp for everyday results logs.
    I then pull all this data to display on waveform graph with the performance data on y axis and time stamp on x axis.
    I convert the time stamp data from string back to time stamp using scan from function in string pallette. When I run the waveform graph vi. The time stamp data is not correct one. I see year values beginning 1974 etc. I change these values to 2011 and the correct dates and then could see the accurate logged data from data logger but I would like to have the starting date in my logged file the left most date on x-axis. I try modify dates in display format section of waveform graph but I think it gives the values in seconds which doesn't make much sense to me. Is it possible to automatically set the starting value of the graph as the first date in the logged file? I am new with using time stamps. Any feedback will be appreciated.
    Kind Regards
    Austin

    Hi Austin,
    "Is it possible to automatically set the starting value of the graph as the first date in the logged file?"
    Sure: Use autoscaling, format x-axis as time and use waveforms with correct t0 value...
    For all other questions you should attach a VI to show your current state of programming!
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Comcast home pge thru firefox does not have correct date, using ie i have the correct date

    when i open comcast using firefox, date on homepage is november 5, when i use internet explorer date is correct

    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Outlook does not display linked images after installin 7525 printer

    Installed 7525HP photosmart printer earlier today.  Since installation, Outlook does not display linked images when I open emails.  p6620f HP desktop computer. 

    You're probably not going to like the answer: Welcome to HTML-based email, and web (browser- or mail-based) rendering incompatibilities and quirks.
    Newer Microsoft Internet Explorer is (much) better than older releases, so see if a newer Windows client or a newer version of Outlook does better.
    If you really want to see what's going on here, view the raw HTML that's getting generated, and see what Microsoft wants or uses or expects within Outlook, and send that.

  • Sharepoint Meeting Workspace Does Not Synchronize Changes Made in Sharepoint Calendar

     I have a Sharepoint Meeting Workspace that is no longer able to track changes to individual Workspace Meetings that I make in the Sharepoint Calendar. I get a message
    "Changes to the event were saved, but they could not be communicated to the Meeting Workspace associated with the event. For more information, contact the server administrator. "
    I am looking for clues on how to fix this issue.....

    Hi Amit,
    you can not move specific changes from Dev to production.
    but you can follow this process to make your workflow as it is as in Dev:
    Create a new workflow on the new list in Product.
    Create at least one step, one condition and one action in this workflow.
    1. In Dev server open your .xomal file as XML and copy the entire contents.
    2.In Production server Open your .xoml file as XML and Paste the entire contents
    3. repeat this operation for the xoml.rules file
    4.Double click the .xoml file for the new workflow to open the workflow in the Workflow Designer and click Check Workflow to verify no errors and then click Finish to ensure the workflow is saved.
    Whenever you need to make changes apply the same.
    Please Mark Answer and Vote me if it will to resolve your issue

  • How to send a mail that appears as meeting dialog in MS outlook?

    Hi:
    Is it possible for the mail adapter to send a mail that appears as a meeting dialog in Ms outlook? If yes, could you please tell how to do it? Actually I'm developing my own module. Thanks a lot.

    if writing a module does not help you...I would suggest you go for a Java proxy for sending this mail and refer to this link for creating a Outlook meeting request using Javamail.
    http://www.bloggingaboutoracle.org/archives/java-outlook-integration-sending-a-meeting-request-from-java

  • Transferring Calendar with Meeting WorkSpace

    I have asked to transfer a meeting workspace with the calendar to another collection site. When I transferred the calendar & meeting workspace - I got no issue but when I click "Go to Calendar", it didn't go back to the calendar that I transferred,
    it went back to a different calendar link. 
    E.g.
    old calendar link: intranet.test.com/sites/project/calendar.aspx
    New link: sharepoint.test.com/sites/project/paperless/calendar.aspx
    when click "Go to Calendar" on meeting workspace, it goes to: sharepoint.test.com/sites/project/calendar.aspx
    Anything I missed out when I migrated it? 

    Hi,
    Meeting workspace was created due to the Calendar event with "use a meeting workspace to organize attendees, agendas, documents,..." and since it is a recurring event, it auto created the dates in the workspace. 
    I tried saving the calendar via template including its content and when I click the workspace link for date, it showing page cannot be displayed. I also import the meeting workspace however (1.)it does not link to the calendar (2.)it empty. 

  • How to create separate Meeting Workspaces and attendees of the meetings from subsequent Meeting Workspaces and it's Attendees

    Hello Community
        I created an "objective" and "Agenda" in a Meeting Workspace and added
    "Attendees".
        Later on I created another "objective" and "Agenda" in a Meeting Workspace
    but, the "objective/Agenda" and Attendees from the last "objective/Agenda"  remain visible.
        The question is how do you create an objective/Agenda and apply the
    attendees that will attend that "Meeting Workspace" and then later create
    another "objective/Agenda" and enter the "Attendees" to that new Meeting Workspace?
        Note: Another way to ask the question is how do you separate and save
    each Meeting Workspace its "objective/Agenda" and its attendees subsequent
    objective/Agenda and its attendees so that you can see each individual meeting
    and the attendees of that meeting?
        Thank you
        Shabeaut

    Hi Shabeaut,
    We could create/link to a meeting workspace when we create a calendar event as I posted above, we could also create a meeting workspace without creating an event.
    http://office.microsoft.com/en-us/sharepoint-foundation-help/create-customize-and-delete-a-meeting-workspace-site-HA010378262.aspx
    Here is the reference for Decision Meeting workspace:
    http://techwirenews.com/2013/01/15/using-decision-meeting-workspace-in-sharepoint-2010-office-365-part-ii/
    In most cases, each meeting workspace is dedicated for certain meeting event in one to one relationship. You need to create difference workspaces for differenct meetings.
    Regards, 
    Rebecca Tu
    TechNet Community Support

Maybe you are looking for

  • I am having mail problems after installing Mountain Lion

    The mail doesn't work properly and the cursor freezes up and I get the color wheel whenever I start typing and have to wait for it to catch up.  All this started after downloading the wonderful upgrade Mountain Lion.  Is there a way to go back.  I wa

  • Problem with macbook connecting to wireless: help please

    thanks for reading this thread. i have a linksys WRT54G2 router connected straight from the ethernet port of a cable internet connection. it's been working fine for the past month or two for both me (using macbook 10.5.6), my flatmate (running vista

  • 2 Log-ins with Single User in SAP B1 8.8/8.81

    Can we still use 1 User ID to log in at 2 different instances simultaneously in SAP B1 8.8/8,81? If no, has SAP provided any documentation in this regard?

  • Sub-query problem on Oracle 10g

    The following query works on Oracle 10.2.0.1.0 on windows,but doesn't work on Oracle 10.2.0.2.0 on Linux. Error report: SQL Error: ORA-00904: "T"."AUDIT_USECS": invalid identifier 00904. 00000 - "%s: invalid identifier" It works after i remove the su

  • [sqlldr] upload number datatype from varchar2 datatype in ctl file

    dear friends. this is two files from my DAT file. In the last field the data is: |3180.8| or |605.| 00000000|0|0601|2000082|6|20131023414|3378|1|MATUTE|40|C|MATUTE|CUADRA 17 DE ISABEL LA CATOLICA|11|03|150115|3180.8| 00000000|0|0601|2000082|1|2013102