Memory_management BSOD
Hello!
It has been a month now, and i constantly receive memory_management BSOD's. Not to mention that my Windows R(8) Hd graphics driver crashes occasionally. I do not know if these are related in any way. I have posted a DUMP file, for review so that my computer
may be diagnosed. I run Windows 7 Home Premium, if that is of any importance.
Link to the MiniDump File uploaded to Skydrive:
Mini Dump File
Thank you for your time and effort.
Hi,
The attached DMP file is of the MEMORY_MANAGEMENT (1a) bug check.
This indicates that a severe memory management error occurred.
BugCheck 1A, {5003, fffff70001080000, f95, 1504e009}
- The 1st parameter of the bug check is 5003 which indicates the working set free list is corrupt.
Please run Memtest for NO LESS than ~8 passes (several hours):
Memtest86+:
Download Memtest86+ here:
http://www.memtest.org/
Which should I download?
You can either download the pre-compiled ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key. What this will do is format your USB drive, make it a bootable device, and then install the necessary
files. Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).
Do note that some older generation motherboards do not support USB-based booting, therefore your only option is CD (or Floppy if you really wanted to).
How Memtest works:
Memtest86 writes a series of test patterns to most memory addresses, reads back the data written, and compares it for errors.
The default pass does 9 different tests, varying in access patterns and test data. A tenth test, bit fade, is selectable from the menu. It writes all memory with zeroes, then sleeps for 90 minutes before checking to see if bits have changed (perhaps because
of refresh problems). This is repeated with all ones for a total time of 3 hours per pass.
Many chipsets can report RAM speeds and timings via SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclocked, Memtest86 can test that memory performance
is error-free with these faster settings.
Some hardware is able to report the "PAT status" (PAT: enabled or PAT: disabled). This is a reference to Intel Performance acceleration technology; there may be BIOS settings which affect this aspect of memory timing.
This information, if available to the program, can be displayed via a menu option.
Any other questions, they can most likely be answered by reading this great guide here:
http://forum.canardpc.com/threads/28864-FAQ-please-read-before-posting
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama
Similar Messages
-
Memory_Management BSOD after upgrading to Windows 8.1
hey everyone, so I updated to windows 8.1 this week mostly to try out Project Spark, and it's given me nothing but trouble since. My computer has never had a problem running but now all of a sudden I'm getting blue screens left and right, shockwave refuses
to work sometimes, and my computer went into auto repair. I have gotten multiple BSODs with MEMORY_MANAGEMENT as well as at least one for 0xC000021a. It may have to do with all the games I have loaded on my computer, as it's particularly active when I want
to play League of Legends. the dump files are here: https://skydrive.live.com/redir?resid=2E2E8DA8870596AC%21117 . Thank you for your time :)* Bugcheck Analysis *
MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041793, The subtype of the bugcheck.
Arg2: fffff680000b9800
Arg3: 0000000000000011
Arg4: 0000000000000010
Debugging Details:
BUGCHECK_STR: 0x1a_41793
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: dota.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff802f0fe5bf2 to fffff802f0fc6ca0
STACK_TEXT:
ffffd000`2cf4f338 fffff802`f0fe5bf2 : 00000000`0000001a 00000000`00041793 fffff680`000b9800 00000000`00000011 : nt!KeBugCheckEx [d:\blue_gdr\minkernel\ntos\ke\amd64\procstat.asm @ 176]
ffffd000`2cf4f340 fffff802`f0ebee82 : ffffe000`0381c360 00000000`00000001 00000000`00000000 ffffe000`53646156 : nt!MiDeleteVirtualAddresses+0x124802 [d:\blue_gdr\minkernel\ntos\mm\deleteva.c @ 248]
ffffd000`2cf4f5a0 fffff802`f1230591 : ffffe000`051f7150 ffffe000`051f7150 ffffe000`00000000 ffffe000`00000000 : nt!MiDeleteVad+0xc02 [d:\blue_gdr\minkernel\ntos\mm\umapview.c @ 394]
ffffd000`2cf4f690 fffff802`f126b440 : 00000000`00040000 ffffd000`2cf4f7c0 00000000`00000000 fffff802`f12888f2 : nt!MmCleanProcessAddressSpace+0x8d [d:\blue_gdr\minkernel\ntos\mm\procsup.c @ 3080]
ffffd000`2cf4f6f0 fffff802`f129e820 : ffffe000`008ec6c0 ffffc000`0237f060 ffffd000`2cf4f7c0 00000000`00000000 : nt!PspRundownSingleProcess+0xac [d:\blue_gdr\minkernel\ntos\ps\psdelete.c @ 530]
ffffd000`2cf4f780 fffff802`f1327334 : 00000000`00000001 ffffe000`00c2d1c0 ffffd000`2cf4fa80 ffffe000`00c2d268 : nt!PspExitThread+0x4c8 [d:\blue_gdr\minkernel\ntos\ps\psdelete.c @ 2039]
ffffd000`2cf4f890 fffff802`f0f1f37a : ffffe000`03344160 ffffd000`2cf4f9e0 ffffe000`00c2d1c0 fffff802`f0f1aaf2 : nt!KiSchedulerApcTerminate+0x18 [d:\blue_gdr\minkernel\ntos\ke\thredsup.c @ 4146]
ffffd000`2cf4f8c0 fffff802`f0fcbbc0 : 00000000`17c306ac ffffd000`2cf4f940 fffff802`f0f6ddd0 00000000`00000000 : nt!KiDeliverApc+0x2fa [d:\blue_gdr\minkernel\ntos\ke\apcsup.c @ 377]
ffffd000`2cf4f940 fffff802`f0fd255a : ffffe000`00c2d1c0 00000000`00000000 ffffe000`075721a0 ffffe000`075721a0 : nt!KiInitiateUserApc+0x70 [d:\blue_gdr\minkernel\ntos\ke\amd64\apcint.asm @ 130]
ffffd000`2cf4fa80 00000000`77742772 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceExit+0x9f [d:\blue_gdr\minkernel\ntos\ke\amd64\trap.asm @ 2406]
00000000`1bb4ebd8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x77742772
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!MiDeleteVirtualAddresses+124802 [d:\blue_gdr\minkernel\ntos\mm\deleteva.c @ 248]
fffff802`f0fe5bf2 cc int 3
FAULTING_SOURCE_LINE: d:\blue_gdr\minkernel\ntos\mm\deleteva.c
FAULTING_SOURCE_FILE: d:\blue_gdr\minkernel\ntos\mm\deleteva.c
FAULTING_SOURCE_LINE_NUMBER: 248
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt!MiDeleteVirtualAddresses+124802
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
DEBUG_FLR_IMAGE_TIMESTAMP: 52718d9c
IMAGE_NAME: memory_corruption
BUCKET_ID_FUNC_OFFSET: 124802
FAILURE_BUCKET_ID: 0x1a_41793_nt!MiDeleteVirtualAddresses
BUCKET_ID: 0x1a_41793_nt!MiDeleteVirtualAddresses
Followup: MachineOwner
Hi,
One of the memory dumps is a Stack Overrun - which is sometimes caused by malware. Please scan your system for malware.
Meanwhile,update your all drivers to the latest version.
Regards,
Kelvin hsu
TechNet Community Support -
After upgrading to Windows 8, then 8.1 from Windows 7 I have been experiencing frequent BSOD halts that appear to be related to the storage driver. Version 12.8 of the intel driver and utility has been used up until now. I have tried an older version (10.8)
of the driver and utility as that was reported to work will with Win 8. I have also (and currently) upgraded to the latest driver 12.9.0.1001 which was released only a few months ago. The issue appears to occur when the system is under high load for
extended periods (e.g. video rendering or extended game play). My guess is that as it's a memory management issue related to when the swap file is being extensively used.
I have a large number of mini-dumps available all with the same error id, and same sub-type. I have scanned the pc to confirm no infections, rootkits or other malware appear to be contributing to this issue. Suggestions or a fix would be greatly appreciated!
Here is some data from the latest full dump:
0: kd> .symfix
0: kd> .reload
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
0: kd> !analyze -vv
* Bugcheck Analysis
MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000003453, The subtype of the bugcheck.
Arg2: ffffe00001bae2c0
Arg3: 0000000000125529
Arg4: 0000000000000004
Debugging Details:
BUILD_VERSION_STRING: 9600.16452.amd64fre.winblue_gdr.131030-1505
SYSTEM_MANUFACTURER: System manufacturer
SYSTEM_PRODUCT_NAME: System manufacturer
BIOS_VENDOR: American Megatrends Inc.
BIOS_VERSION: 1403
BASEBOARD_MANUFACTURER: ASUSTeK Computer INC.
OVERLAPPED_UNLOADED_MODULE: Address regions for 'dump_iaStorA'
and 'dump_iaStorA.sys (unloaded)' overlap
BUGCHECK_STR: 0x1a_3453
CPU_MICROCODE: 6,f,b,0 (F,M,S,R) SIG: C1'00000000 (cache) C1'00000000 (init)
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 0
ANALYSIS_SESSION_HOST: SILENTBOB
ANALYSIS_SESSION_TIME: 01-04-2014 00:07:43.0544
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
LAST_CONTROL_TRANSFER: from fffff8021b1ff0a5 to fffff8021b1cdca0
STACK_TEXT:
ffffd000`21a4a8b8 fffff802`1b1ff0a5 : 00000000`0000001a 00000000`00003453 ffffe000`01bae2c0 00000000`00125529 : nt!KeBugCheckEx
ffffd000`21a4a8c0 fffff802`1b472fed : ffffffff`ffffffff ffffe000`06eae0b0 ffffe000`04e98a60 ffffe000`01bae5a8 : nt! ?? ::FNODOBFM::`string'+0x20f05
ffffd000`21a4a960 fffff802`1b472ae9 : ffffe000`01bae2c0 ffffe000`04e98a60 ffffe000`01bae5a8 00000000`00000001 : nt!MmDeleteProcessAddressSpace+0x35
ffffd000`21a4a9a0 fffff802`1b4aebf8 : 00000000`00000000 00000000`00000000 ffffe000`01bae2c0 ffffe000`000c32f0 : nt!PspProcessDelete+0x199
ffffd000`21a4aa40 fffff802`1b0bb60f : 00000000`00000000 ffffd000`21a4ab69 ffffe000`01bae2c0 ffffe000`07eee000 : nt!ObpRemoveObjectRoutine+0x64
ffffd000`21a4aaa0 fffff802`1b10a3d2 : ffffe000`07eee000 ffffe000`07eeede8 ffffe000`07eeeff8 ffffe000`07eee048 : nt!ObfDereferenceObject+0x8f
ffffd000`21a4aae0 fffff802`1b4769b5 : 00000000`00000000 00000000`00000000 ffffd000`21a4ab69 ffffe000`07eeede8 : nt!MmFreeAccessPfnBuffer+0x22
ffffd000`21a4ab10 fffff802`1b6805ce : 00000000`00000001 fffff802`1b31f928 00000000`00000000 ffffe000`00000000 : nt!PfpFlushBuffers+0x24d
ffffd000`21a4abd0 fffff802`1b10d2e4 : 00000000`00000000 ffffe000`04e98740 ffffe000`04e98740 ffffe000`000ee900 : nt!PfTLoggingWorker+0x156
ffffd000`21a4ad40 fffff802`1b1d42c6 : ffffd000`201d5180 ffffe000`04e98740 ffffd000`201e11c0 ffffc000`04accdd0 : nt!PspSystemThreadStartup+0x58
ffffd000`21a4ada0 00000000`00000000 : ffffd000`21a4b000 ffffd000`21a45000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+20f05
fffff802`1b1ff0a5 cc int 3
FAULT_INSTR_CODE: 85c6ffcc
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+20f05
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 52718d9c
BUCKET_ID_FUNC_OFFSET: 20f05
FAILURE_BUCKET_ID: 0x1a_3453_VRF_nt!_??_::FNODOBFM::_string_
BUCKET_ID: 0x1a_3453_VRF_nt!_??_::FNODOBFM::_string_
ANALYSIS_SESSION_ELAPSED_TIME: fdb
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x1a_3453_vrf_nt!_??_::fnodobfm::_string_
FAILURE_ID_HASH: {218cdcfe-f420-cf6d-10b1-e3e8392a9d9e}
Followup: MachineOwner
0: kd> kb
RetAddr : Args to Child
: Call Site
fffff802`1b1ff0a5 : 00000000`0000001a 00000000`00003453 ffffe000`01bae2c0 00000000`00125529 : nt!KeBugCheckEx
fffff802`1b472fed : ffffffff`ffffffff ffffe000`06eae0b0 ffffe000`04e98a60 ffffe000`01bae5a8 : nt! ?? ::FNODOBFM::`string'+0x20f05
fffff802`1b472ae9 : ffffe000`01bae2c0 ffffe000`04e98a60 ffffe000`01bae5a8 00000000`00000001 : nt!MmDeleteProcessAddressSpace+0x35
fffff802`1b4aebf8 : 00000000`00000000 00000000`00000000 ffffe000`01bae2c0 ffffe000`000c32f0 : nt!PspProcessDelete+0x199
fffff802`1b0bb60f : 00000000`00000000 ffffd000`21a4ab69 ffffe000`01bae2c0 ffffe000`07eee000 : nt!ObpRemoveObjectRoutine+0x64
fffff802`1b10a3d2 : ffffe000`07eee000 ffffe000`07eeede8 ffffe000`07eeeff8 ffffe000`07eee048 : nt!ObfDereferenceObject+0x8f
fffff802`1b4769b5 : 00000000`00000000 00000000`00000000 ffffd000`21a4ab69 ffffe000`07eeede8 : nt!MmFreeAccessPfnBuffer+0x22
fffff802`1b6805ce : 00000000`00000001 fffff802`1b31f928 00000000`00000000 ffffe000`00000000 : nt!PfpFlushBuffers+0x24d
fffff802`1b10d2e4 : 00000000`00000000 ffffe000`04e98740 ffffe000`04e98740 ffffe000`000ee900 : nt!PfTLoggingWorker+0x156
fffff802`1b1d42c6 : ffffd000`201d5180 ffffe000`04e98740 ffffd000`201e11c0 ffffc000`04accdd0 : nt!PspSystemThreadStartup+0x58
00000000`00000000 : ffffd000`21a4b000 ffffd000`21a45000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
0: kd> dv
Unable to enumerate locals, HRESULT 0x80004005
Private symbols (symbols.pri) are required for locals.
Type ".hh dbgerr005" for details.You may have read this thread?
http://answers.microsoft.com/en-us/windows/forum/windows_8-system/bsod-power-driver-state-failure-iastorasys/4643832c-e2b6-49ca-b646-6ff135bc30f9?msgId=e7295c77-5107-4bb2-843b-3326b3786ee8
Have you run the Memtest86 tool for testing memories?
http://www.memtest.org/ -
MSI P55 GD65 - BSOD - MEMORY_MANAGEMENT
I'm facing a weird issue with my pc:
If I turn on the PC, the system starts up fine, but within 30 secs up to 5 minutes I get a BSOD (usually MEMORY_MANAGEMENT).
If I then restart the system it will run fine..
CPU intensive gaming, memory checks, benchmarks, standby and wakeup, all runs fine... after a first BSOD.
I've tried all kinds of memory settings, but nothing seems to help. Also hard to test if it runs fine after a crash.
It's almost like the system needs to warm-up a bit and then it will run fine
The BSOD message indicates a memory issue, but then I would expect random BSOD, not only right after cold start.
Any suggestions?
MSI P55 GD65 - latest 1.9 bios
i875k
Windows 7 64bit
Geil DDR3-1600 2x2GB Black Dragon GB34GB1600C8DC
This Geil ram is not in the MSI memory list but Geil shows the MSI P55 GD65 in their compatibility list for this memory:
"All motherboards listed on the GeIL Qualified Motherboard List – GQML have been tested with the specified GeIL memory kits for compatibility, stability and
performance by GeILs’ FAE to ensure best quality."
http://www.geil.com.tw/uploads/download_files/c8c397a9533d1896e708e3c106a99cb3.pdfStatus update:
I've reset the bios to safe defaults.
Started up memtest86+ and screen turned red rather then blue, so lots of mem-errors.
Restarted and then memtest ran fine for more then 10 hours.
Passed 20 times all tests no errors with both Dimms inserted.
Then I tested cold start with 1 dimm only:
- with 1 DIMM in slot 3 only system cold-starts fine and memtest runs fine with no errors.
- with 1 DIMM in slot 1 only system cold-starts fine and memtest starts up but then doesn't even start a test. So it seems to be hanging already.
Swapping both dimms showed the same result.
Preliminary conclusion now is a faulty slot 1
Does it indeed sound like a slot 1 issue?
MB is the worst part to RMA, so hopefully I can find a solution.... slot 1 seems not to be completely broken after all.
PS: increasing to 1.6V I had already tried before without success. -
Windows Server 2008 R2 SP1 BSOD 0x1a with CLFS.sys
Hello,
I've got a BSOD on a Windows Server 2008 R2 with SP1 installed. Analyzed the dump and could
see a Bug-check of 0x1a which means "MEMORY_MANAGEMENT".
Further analysis on this dump shows me, that this probably is caused by the CLFS.sys, which
is the Common Log File System Driver. This CLFS.sys is installed with date:
Tue Jul 14 01:19:57 2009
I have now searched trough MS Support pages and resources and also the Internet, but I found no
information about an update for this or a newer version. It's nearby impossible to find newer versions
for specific files in i.e. Hot-fixes.
Do you know this issue with the 0x1a BSOD and CLFS.sys and/or do you know a newer version ?
Any help would be very appreciated!
Thanks and regards plus have a nice day !
TinoHi Tino,
Regarding to Bug Check 0x1A, please refer to following article.
Bug Check 0x1A: MEMORY_MANAGEMENT
Did you install any third-party application in this problematic server? Would you please let me know whether
the BSOD issue occurred regularly? Or just occurred suddenly? If the BSOD issue occurred regularly, please
perform a clean boot and check if this BSOD issue still exists.
In addition, please check if necessary updates need to be installed and drivers need to be updated. Please
run sfc /scannow command to scan all protected system files and check if find errors.
As you know, troubleshoot this kind of kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Actually, it is not effective
for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
àThis CLFS.sys is installed with date: Tue Jul 14 01:19:57 2009
àor do you know a newer version?
By the way, I checked the CLFS.sys in a Windows Server 2008 R2 in my Lab environment. It also created in July
2009.
Hope this helps.
Best regards,
Justin Gu -
Random BSOD after installing Windows 8.1 on Lynx K3011
I upgraded the graphics drivers as intructed her in another thread and that works now. However I keep getting a random BSOD with the error MEMORY_MANAGEMENT.
I did a bug check analysis and this is the result:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\101413-9031-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 9600.16384.x86fre.winblue_rtm.130821-1623
Machine Name:
Kernel base = 0x81c14000 PsLoadedModuleList = 0x81e0e218
Debug session time: Mon Oct 14 12:47:54.837 2013 (UTC - 7:00)
System Uptime: 0 days 0:00:09.648
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 1A, {1238, 85ea6368, 802, 0}
Probably caused by : rdyboost.sys ( rdyboost!ST_STORE<SMD_TRAITS>:tReleaseRegion+4c )
Followup: MachineOwner
3: kd> !analyze -v
* Bugcheck Analysis *
MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 00001238, The subtype of the bugcheck.
Arg2: 85ea6368
Arg3: 00000802
Arg4: 00000000
Debugging Details:
BUGCHECK_STR: 0x1a_1238
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from 81d63c8d to 81d14ce4
STACK_TEXT:
8b90ebf0 81d63c8d 0000001a 00001238 85ea6368 nt!KeBugCheckEx
8b90ec38 82d1abb4 85ea6368 8506b040 00000162 nt! ?? ::FNODOBFM::`string'+0x355e7
8b90ec54 82d18dec 00000000 8506bd10 00000001 rdyboost!ST_STORE<SMD_TRAITS>:tReleaseRegion+0x4c
8b90ecc4 82d1704b 00000000 86291040 8506b008 rdyboost!ST_STORE<SMD_TRAITS>:tDmPageRemove+0x3ac
8b90ed00 82d1739e 00000000 8506c200 83a4b040 rdyboost!ST_STORE<SMD_TRAITS>:tWorkItemProcess+0xf3
8b90ed40 82d266a0 ce25f08e 00000000 8506c200 rdyboost!SMKM_STORE<SMD_TRAITS>:mStWorker+0xfc
8b90ed70 81cc36a8 8506b008 61b2fcc6 00000000 rdyboost!SMKM_STORE<SMD_TRAITS>:mStWorkerThread+0x1d
8b90edb0 81d2a701 82d26683 8265bf68 00000000 nt!PspSystemThreadStartup+0x58
8b90edbc 00000000 00000000 2444c718 80000010 nt!KiThreadStartup+0x15
STACK_COMMAND: kb
FOLLOWUP_IP:
rdyboost!ST_STORE<SMD_TRAITS>:tReleaseRegion+4c
82d1abb4 6a00 push 0
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: rdyboost!ST_STORE<SMD_TRAITS>:tReleaseRegion+4c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: rdyboost
IMAGE_NAME: rdyboost.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 52158f40
BUCKET_ID_FUNC_OFFSET: 4c
FAILURE_BUCKET_ID: 0x1a_1238_rdyboost!ST_STORE_SMD_TRAITS_:tReleaseRegion
BUCKET_ID: 0x1a_1238_rdyboost!ST_STORE_SMD_TRAITS_:tReleaseRegion
Followup: MachineOwner
Any ideas? Probably more incompatible drivers. If I can't get Windows 8.1 running correctly, does anyone know how to restore the system image?
Solved!
Go to Solution.this error is so much obvius.
just look on internet on how to disable readyboost. additional just turn off the hybrid function and u will never see this bsod again, even i dont know how dumb ur mediacenter edition is and want to give u other bsods. btw i only seen bsods couse of **bleep** driver on my devices. donno how u manage to get such bluescreens......
btw according to the results i recommning ya to use ckhdsk /f to ur disk. mstWorker is mentioned wich means read write issues on access files. mstworker is microsoft Tiworker, an process wich examines files an bit. used by winupdate and the indexer. -
Multiple BSOD Windows 7 Home Premium 64bit Fujitsu Amilo Desktop
hi, ive had my fujitsu amilo pc for about 7-8 years and its been working fine until just after xmas i started getting bluescreens and pc wouldnt start up.. ive tried everything, memtest shows no problems , heres a list of bsod codes ive wrote down:
driver irql not less or equal (i think thats what it said)
system_service_exception (this and above are most frequent)
memory_management
reference_by_pointer
page fault in non paged area
dxgkrnl (couldnt catch the rest of what it said)
but yeah, i thought it was my external graphics card so i took that out and still having problems.. ive done driver booster 2 pro and updated all drivers, tried reinstall of windows etc..
specs:
1tb hdd
4gb ram
quad core processor
minidump files:
https://onedrive.live.com/redir?resid=4AA35FD013E54D17%21118 or http://1drv.ms/1tZvlFA
if anyone could help that would be great, im really stuck on this one
Chrisive run memtest with no probs found, driver booster 2 pro, ive downloaded chipset drivers from nvidia using system scan to identify the right machine, i'm not and never have overclocked, havent needed to as its
a good machine.. i've taken my external graphics card out as i suspected this was the problem and now still having issues
I think running driver verifier will help tell us more about what is going on, as already mentioned by
ZigZag3143x. Secondly, please uninstall driver booster. You don't need a third party program/utility to help in updating your drivers. Manuallysearch for, and update your devices from the system, motherboard or device manufacturers website.
Last but not least, please check the "hotfix" linked below, and determine whether or not, it applies to your system.
I mention the hotfix because you have 1394ohci.sys on your loaded modules list.
Stop error code 0x0000003B (SYSTEM_SERVICE_EXCEPTION) on a computer that is running Windows 7 or Windows Server 2008 R2 when you use some IEEE 1394 devices.
http://support.microsoft.com/kb/980932
Crash details...
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80002f99d7d, Address of the instruction which caused the bugcheck
Arg3: fffff88003eddf40, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!AlpcpReceiveSynchronousReply+5d
fffff800`02f99d7d f0480fba6ff800 lock bts qword ptr [rdi-8],0
CONTEXT: fffff88003eddf40 -- (.cxr 0xfffff88003eddf40)
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=fffffa8006624b50 rsi=0000000000000000 rdi=7ffff8a002205930
rip=fffff80002f99d7d rsp=fffff88003ede920 rbp=fffffa8006624b50
r8=fffffa800646fbb8 r9=0000000000000000 r10=fffffffffffffff7
r11=0000000000000000 r12=fffff88003ede9b8 r13=0000000060000000
r14=fffffa8006471d20 r15=fffffa8006471d20
iopl=0 nv up ei pl nz na po nc
cs=0010 ss=0000 ds=002b es=002b fs=0053 gs=002b efl=00010206
nt!AlpcpReceiveSynchronousReply+0x5d:
fffff800`02f99d7d f0480fba6ff800 lock bts qword ptr [rdi-8],0 ds:002b:7ffff8a0`02205928=????????????????
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: svchost.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff80002f99d7d
STACK_TEXT:
fffff880`03ede920 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!AlpcpReceiveSynchronousReply+0x5d
FOLLOWUP_IP:
nt!AlpcpReceiveSynchronousReply+5d
fffff800`02f99d7d f0480fba6ff800 lock bts qword ptr [rdi-8],0
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: nt!AlpcpReceiveSynchronousReply+5d
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 521ea035
STACK_COMMAND: .cxr 0xfffff88003eddf40 ; kb
FAILURE_BUCKET_ID: X64_0x3B_nt!AlpcpReceiveSynchronousReply+5d
BUCKET_ID: X64_0x3B_nt!AlpcpReceiveSynchronousReply+5d
Followup: MachineOwner -
BSOD hal.dll+12903 and ntoskrnl.eve+185543
I have been working on this PC for quit some time the person before me had no records of what was wrong with the PC or what he did to correct it. The PC shuts down at random and freezes at times, I had changed the UPS, the power cord and even noticed that
the heat sink was loose fixed that. Still the PC kept freezing, I decided to go ahead and re-install Win7 now its BSOD and I used Bluescreenview to view the errors and hal.dll and ntoskrnl.exe appeared. I ran a mem test and it was ok ran an HD test and still
good. Any help is appreciated thanks in advance.
Running Win 7 pro 64bit
4gig ram
video: NVIDIA GeForce 8400GS
mobo: P5N-E SLI
==================================================
Dump File : 061914-34788-01.dmp
Crash Time : 6/19/2014 9:02:30 AM
Bug Check String :
Bug Check Code : 0x00000124
Parameter 1 : 00000000`00000000
Parameter 2 : fffffa80`04cbe038
Parameter 3 : 00000000`b2000000
Parameter 4 : 00000000`00010014
Caused By Driver : hal.dll
Caused By Address : hal.dll+12903
File Description : Hardware Abstraction Layer DLL
Product Name : Microsoft® Windows® Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor : x64
Crash Address : ntoskrnl.exe+6f880
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\061914-34788-01.dmp
Processors Count : 2
Major Version : 15
Minor Version : 7600
Dump File Size : 270,984
Dump File Time : 6/19/2014 9:04:35 AM
==================================================
==================================================
Dump File : 061914-38735-01.dmp
Crash Time : 6/19/2014 8:55:48 AM
Bug Check String : MEMORY_MANAGEMENT
Bug Check Code : 0x0000001a
Parameter 1 : 00000000`00041790
Parameter 2 : fffffa80`017ac900
Parameter 3 : 00000000`0000ffff
Parameter 4 : 00000000`00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+6f880
File Description : NT Kernel & System
Product Name : Microsoft® Windows® Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.17273 (win7_gdr.130318-1532)
Processor : x64
Crash Address : ntoskrnl.exe+6f880
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\061914-38735-01.dmp
Processors Count : 2
Major Version : 15
Minor Version : 7600
Dump File Size : 270,984
Dump File Time : 6/19/2014 8:57:53 AM
==================================================Tmtz15
There wer all related to hardware and called BCC124
Stop 0x124 is a hardware error
If you are overclocking try resetting your processor to standard settings and see
if that helps.
If you continue to get BSODs here are some more things you may want to consider.
This is usually heat related, defective hardware, memory or even processor though
it is"possible" that it is driver related (rare).
Stop 0x124 - what it means and what to try
Synopsis:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.
Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.
Generic "Stop 0x124" Troubleshooting Strategy:
1) Ensure that none of the hardware components are overclocked. Hardware that is driven beyond its design specifications - by overclocking - can malfunction in unpredictable
ways.
2) Ensure that the machine is adequately cooled.
If there is any doubt, open up the side of the PC case (be mindful of any relevant warranty conditions!) and point a mains fan squarely at the motherboard. That will rule out most (lack of) cooling issues.
3) Update all hardware-related drivers: video, sound, RAID (if any), NIC... anything that interacts with a piece of hardware.
It is good practice to run the latest drivers anyway.
4) Update the motherboard BIOS according to the manufacturer's instructions and clear the CMOS.
Their website should provide detailed instructions as to the brand and model-specific procedure.
5) Rarely, bugs in the OS may cause "false positive" 0x124 events where the hardware wasn't complaining but Windows thought otherwise (because of the bug).
At the time of writing, Windows 7 is not known to suffer from any such defects, but it is nevertheless important to always keep Windows itself updated.
6) Attempt to (stress) test those hardware components which can be put through their paces artificially.
The most obvious examples are the RAM and HDD(s).
For the RAM, use the 3rd-party memtest86 utility to run many hours worth of testing. (6-8 passes to stress the ram out)
For hard drives, check whether CHKDSK /R finds any problems on the drive(s), notably "bad sectors".
Unreliable RAM, in particular, is deadly as far as software is concerned, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result from the diagnostics utilities does not guarantee that the RAM is
free from defects - only that none were encountered during the test passes.
7) As the last of the non-invasive troubleshooting steps, perform a "vanilla" reinstallation of Windows: just the OS itself without any additional applications, games,
utilities, updates, or new drivers - NOTHING AT ALL that is not sourced from the Windows 7 disc.
Should that fail to mitigate the 0x124 problem, jump to the next steps.
If you run the "vanilla" installation long enough to convince yourself that not a single 0x124 crash has occurred, start installing updates and applications slowly, always pausing between successive additions long enough to get a feel for whether the machine
is still free from 0x124 crashes.
Should the crashing resume, obviously the very last software addition(s) may be somehow linked to the root cause.
If stop 0x124 errors persist despite the steps above, and the hardware is under warranty, consider returning it and requesting a replacement which does not suffer periodic MCE events.
Be aware that attempting the subsequent hardware troubleshooting steps may, in some cases, void your warranty:
8) Clean and carefully remove any dust from the inside of the machine.
Reseat all connectors and memory modules.
Use a can of compressed air to clean out the RAM DIMM sockets as much as possible.
9) If all else fails, start removing items of hardware one-by-one in the hope that the culprit is something non-essential which can be removed.
Obviously, this type of testing is a lot easier if you've got access to equivalent components in order to perform swaps.
Should you find yourself in the situation of having performed all of the steps
above without a resolution of the symptom, unfortunately the most likely reason is because the error message is literally correct - something is fundamentally wrong with the machine's hardware.
More advanced reading can be found here from a MS MVP IT PRO
http://captaindbg.com/bug-check-0x124-whea_uncorrectable_error-how-to-troubleshoot/
Wanikiya and Dyami--Team Zigzag -
Apple iTunes 10.0.1 = BSOD in Windows 7
Okay! I always upgrade to the latest version of software, chiefly as a test bed for others with whom I consult. I have been running Windows 7 since it was released (well before actually ).
I have never ever had a BSOD for any reason on ANY of my Windows 7 machines. Until today. I upgraded iTunes from 10.0.68 to 10.0.1, and now, as I navigate around iTunes, I either get a program has stopped working and will be closed message, or the BSOD. The BSOD message, high flyover is the error was in Memory_Management.
Here are my computer specs:
Model: HP Pavilion DV6756
OS: Windows 7 64-bit
Memory: 3 Gigabytes
CPU: Intel Centrino
Anyone else having as much fun as I am?I see the system has been saving memory dumps for the crashes. With any luck, if we interrogate the dump files with the 64-bit version of WinDbg, we can track down the component causing the crash.
1. Download and install the 64-bit version of Windows debugging tools from here:
http://www.microsoft.com/whdc/devtools/debugging/install64bit.mspx
2. Go to Start, All Programs, Debugging Tools For Windows, Windbg
Once you open Windbg, you will presented with a blank screen.
3. Click on "File > Symbol File Path". Here you will enter the symbols
path. Symbols are needed to effectively debug.
The path will be:
SRVc:symbolshttp://msdl.microsoft.com/download/symbols
4. Enter in this path and click OK. Now, go to "File > Save Workspace"
so that your symbols path is saved for future use.
5. Go to "File > Open Crash Dump" and load the file.
(An "Open Crash Dump" screen will appear ... navigate to C:\Windows\MEMORY.DMP\, or C:\Windows\Minidump\, and doubleclick on one of the dump files there.)
If you get a dialog at this point saying you don't have permission to open the file, try this: OK out of the permission warning dialog. Right-click on the dump file (In the "Open Crash Dump" screen), and select "Properties". Click the "Security" tab. Click the "Advanced" button. Click "Continue". Check the "Include inheritable permissions from this object's parent" checkbox, and click OK. Click Yes when the Windows security box comes up. Close the "properties" screens at this point, and go back to "Open Crash Dump", and try doubleclicking on the dump file again.
You will/should get a message to save base workspace information. Choose no.
Now you will get a debugging screen. It takes a little bit to run it,
as the symbols have to be downloaded as they are needed.
After the "bugcheck analysis" part of the screen comes up, look for the component that seems to be causing the crash.
Let us know the precise name of the component. (Include any file name extensions like .dll or .sys.)
If you can, have a look at several of the dumps that seem to be associated with the BSODs. Are all the crashes being caused by the same component? If not, could you let us know the names of the various components being cited in the various crash dumps? -
Random BSOD X58 Pro E new build
Hi everyone, I hope you can help me. I'm new to the custom built PC realm so forgive my ignorance on some of the finer points. I have searched and can't seem to find, or perhaps understand a solution to this problem I'm having. So, with the obligatory "please don't hit me" stuff out of the way here's the deal….
This PC was purchased from ibuypower with a factory 20% overclock. BSODs have appeared randomly since I unpacked it. Initially it was thought these screens were due to an unstable overclock, however they have persisted even with optimized defaults enabled. They usually appear during the first boot of the day, during light duty internet browsing, or doing nothing much at all. The BSOD has never appeared under a heavy load such as flight sim, photoshop, or lightroom (overclocked or not the PC has performed flawlessly running these programs). For example I ran flight simulator for three hours the other night at 3.85GHz with my RAM at 1600MHz and it ran beautifully. As you can see below however (info compiled from the program “whocrashed”) it has happened a ton. These have occurred pretty equally in OC and default configuration. I've ran the default win 7 memory diagnostic, LinX, and memtest86+ with no errors found so far. I hope I have provided enough information for a diagnosis, if most it is useless then I apologize and I will do my best to track down whatever additional info may be required to get to the bottom of this. Thank you in advance.
Intel Core i7-960 3.2GHz
MSI X58 Pro-E MS-7522 BIOS ver. 8.14
Corsair DDR3 1600Mhz 3x2GB
XFX HD 6950 2GB GDDR5 PCI Express 2.1x16
WD 1TB 7200RPM SATA 6.0Gb/s 64MB cache
12-1 internal USB card reader
Corsair H70 Liquid Cooler
Enermax 120mm Fan
Windows 7 home premium 64bit
Corsair AX850 850watts (3.3v/25a, 5v/25a, 12v/70a)
Below is a list of all crashes that have occured...
On Fri 4/8/2011 11:53:11 PM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: atikmdag.sys (atikmdag+0x164394)
Bugcheck code: 0x50 (0xFFFFF89FCAC822CC, 0x0, 0xFFFFF88004A21394, 0x5)
Error: PAGE_FAULT_IN_NONPAGED_AREA
description: ATI Radeon Kernel Mode Driver
On Fri 4/8/2011 4:05:29 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\040811-16921-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x80640)
Bugcheck code: 0x1A (0x41284, 0x2FCC001, 0x0, 0xFFFFF70001080000)
Error: MEMORY_MANAGEMENT
description: NT Kernel & System
On Wed 4/6/2011 12:22:06 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\040611-14078-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x80640)
Bugcheck code: 0x1A (0x403, 0xFFFFF68000029698, 0x4E000001B11EA867, 0xFFFFF68000000002)
Error: MEMORY_MANAGEMENT
description: NT Kernel & System
On Wed 4/6/2011 12:13:51 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\040611-17062-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x80640)
Bugcheck code: 0x50 (0xFFFFF88047479380, 0x0, 0xFFFFF88004C00215, 0x5)
Error: PAGE_FAULT_IN_NONPAGED_AREA
description: NT Kernel & System
On Wed 4/6/2011 12:29:38 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\040511-19218-01.dmp
This was probably caused by the following module: fltmgr.sys (fltmgr+0x22751)
Bugcheck code: 0x1A (0x41201, 0xFFFFF6800002C398, 0x443000001B152867, 0xFFFFFA8005D5F330)
Error: MEMORY_MANAGEMENT
description: Microsoft Filesystem Filter Manager
On Mon 4/4/2011 12:44:17 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\040411-16234-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x80640)
Bugcheck code: 0x1A (0x41790, 0xFFFFFA80033A7AC0, 0xFFFF, 0x0)
Error: MEMORY_MANAGEMENT
description: NT Kernel & System
On Fri 4/1/2011 3:10:21 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\040111-16984-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x80640)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF88002922120, 0xFFFFF8800A98B7A0, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
description: NT Kernel & System
On Fri 4/1/2011 1:35:24 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\040111-17093-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x80640)
Bugcheck code: 0x1A (0x41790, 0xFFFFFA8004970460, 0xFFFF, 0x0)
Error: MEMORY_MANAGEMENT
description: NT Kernel & System
On Thu 3/31/2011 6:16:22 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\033111-24796-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x70740)
Bugcheck code: 0x1A (0x41284, 0xA017001, 0x5CD2, 0xFFFFF70001080000)
Error: MEMORY_MANAGEMENT
description: NT Kernel & System
On Thu 3/31/2011 6:14:46 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\033111-14218-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x70740)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80002F4A43D, 0xFFFFF88006FF6D70, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
description: NT Kernel & System
On Wed 3/30/2011 6:27:21 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\033011-17968-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x71F00)
Bugcheck code: 0x1A (0x41790, 0xFFFFFA8003445980, 0xFFFF, 0x0)
Error: MEMORY_MANAGEMENT
description: NT Kernel & System
On Wed 3/30/2011 6:24:50 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\033011-22375-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x71F00)
Bugcheck code: 0x1A (0x41284, 0x5F3B001, 0xA2D, 0xFFFFF70001080000)
Error: MEMORY_MANAGEMENT
description: NT Kernel & System
On Wed 3/30/2011 6:23:00 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\033011-23234-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x71F00)
Bugcheck code: 0x34 (0x50830, 0xFFFFF880033387F8, 0xFFFFF88003338050, 0xFFFFF80002D8908D)
Error: CACHE_MANAGER
description: NT Kernel & System
On Wed 3/30/2011 6:18:27 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\033011-14640-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x71F00)
Bugcheck code: 0x50 (0xFFFFFB00C2A67AE0, 0x0, 0xFFFFF96000171509, 0x7)
Error: PAGE_FAULT_IN_NONPAGED_AREA
description: NT Kernel & System
On Wed 3/30/2011 6:11:53 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\033011-18218-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x71F00)
Bugcheck code: 0x50 (0xFFFFFAA007336454, 0x0, 0xFFFFF880012BD642, 0x5)
Error: PAGE_FAULT_IN_NONPAGED_AREA
description: NT Kernel & SystemWith optimized defaults enabled the DRAM voltage is set to auto and it doesn't appear I can change it..please advise. Also, the BSODs have gotten much worse now and I haven't changed anything, they now occur at any time. I've probably gotten six in the past three hours. I guess the computer knows I have reached out to you guys and it's peeved
When the OC is enabled (hasn't been for several days now, but BSODs still occured when it was) the DRAM voltage was set to 1.64v per "tech support" they said that setting it to 1.65v would actually be 1.66v (not sure how that is, but that's what they said).
And to your last question their OC settings were +0.100 on the CPU voltage and 160 on the base clock. -
The tale of BSoD and Depot exchange. New Lenovo customer.
Greetings community, new first time owner of a Lenovo Product....
This has been a very upsetting experience to the date. I received my W530 5/20/2013 after two delays in the shipping. Upon the initial startup I was met with an immediate BSOD. Not entirely worried I continued with the routine update of Lenovo and then windows programs. Unfortunately, the BSoD continued from that moment on for the next few hours. After living through that I called up Lenovo support service and began asking questions. They said I could send it in to be repaired.
Following the first repair, (which results were a simle re-image) I wanted to test my faith in Lenovo so when the issues continued with error codes such as "PFN_list_corrupt", ""Memory_management". I sent it again.
After receiving w530 back from second depot, issues on CPU OS_lockup and Re-image were the actions taken.
Once again, a short hour after initial startup I was greeted warmly by "Memory_management".
I suspect the RAM or the memory control on board as the culprit behind these issues... and i would really appreciate any help searching for a way to resolve them.
The newest errror code today was a "System_service_exception" (0x0000003b)
I have passed the 21 days for return on the product while only having the laptop in my possesion for <14 days. Return is (unfortunely and highly depressing.) not an option. I just want to get to the bottom of receiving the product in this state and a means fix the recurring issues that updated drivers/solutions software cannot do alone.
Is there any advice the community could offer me in this possition?
W530 i7-3840Qm. Quad K1000M. 16GB RAM. 16GB mSSD(expresscache). 500gb HDD
W530 i7-3840Qm. Quad K1000M. 16GB RAM. 16GB mSSD(expresscache). 500gb HDD
Solved!
Go to Solution.I have encountered the 3b BSOD quite a few times along with a long list of other BSODs.
Depending on how many ram you have. Try taking all but one stick out of the computer and see if it persists. Try your different RAM sticks that way.
Another option is to run some RAM test, but they will often say that nothing is wrong (they did on mine).
When I got all my RAM switched the BSODs stopped.
Before that my computer supplier tried loading a new win 7 image, changed HD (twice), changed GPU, changed motherboard.
But all it took was 16 GB of fresh RAM. -
I keep getting BSOD. At first I had windows vista installed, I tried updating everything, bios, memory drivers, graphics drivers, again still BSOD. I downgrading to windows XP(because of this and other reasons). I still get BSOD.
The messages associated with it are:
1)no message given
2)memory_management
3)irql_not_less_or_equal
I have the Lenovo T61p.
Any assistance would be greatly appreciated.Hello David,
The Sequence setting needs to match the video and audio of the incoming files. When this occurs correctly rendering is minimized.
Sequence settings are selected by choosing the correct _Easy Setup_ before the material is edited to the Timeline.
Note: The Material has to match the Sequence settings not the other way round. FCE works with fixed formats.
If you provide details of the footage you are working with and how they arrived into FCE, we may be able to help.
Al -
A funny anomaly for those who use JDK on Windows 7, just for your info.
On Windows 7 Professional ver.6.1 (Build 7601: Service Pack 1) that has Adobe Reader 9 Automatic Updater enabled, an attempt to download jdk-7u2-windows-i586.exe resulted in Blue Screen of Death every time when the Adobe Updater has "Click here for Updating for the newest version of Adobe Reader" displayed (as a sign of a completed automatic installer download, and the message ignored by the user).
The BSOD occurred at the last part of the download, occurred every time without failure, until I finally gave up enjoying the good old Blue Screen and installed the latest Adobe Reader 9(version 9.4.7) before downloading the JDK 7u2 installer. After this Adobe install, the download and the installation of the SE JDK went smoothly without a hitch.Thanks for the comment. It prompted me to describe the BSOD in more detail.
Out of the 11 times I experienced these BSOD's while downloading 7u2, I got several different bug check strings:
MEMORY_MANAGEMENT 4 times, Points to ntkrnlpa.exe
IRQL_NOT_LESS_OR_EQUAL 3 times, Points to fltmgr.sys, MpFilter.sys, ntkrnlpa.exe (once)
Points to halmacpi.dll, ntkrnlpa.exe (twice)
BAD_POOL_HEADER Twice, Points to fltmgr.sys, halmacpi.dll, ntkrnlpa.exe
KERNEL_MODE_EXCEPTION_NOT_HANDLED Once, Points to ntkrnlpa.exe
PFN_LIST_CORRUPT Once, Points to ntkrnlpa.exe
Interesting, isn't it? It seems Windows is not quite sure what to blame the blue screen for. While I am quite aware of app developers' tendency to blame device drivers, driver coders blaming BIOS, BIOS coders pointing to hardware for the "cause" of a problem, I am not interested in semantics on the difference between causing and triggering. It is certainly true that many BSOD has their roots in device driver and BIOS bugs, but I am not so sure if this is the case here. As I don't have the time to look into the way Adobe lets its updater to make downloaded file status to survive a reboot, how Oracle installer performs CRC and other operations, and how Windows system files and config protection schemes interact with them, I chose to be a news reporter. -
New build keeps BSOD and freezing
HI all
Right here we go
i have built a PC for my son specs are
OS: win7 home 64bit
Motherboard: msi Z87 G45
Memory: patriot viper 3 1600 8GB
GPU: Gigabyte 650TI 2GB
CPU: I5 4670K Haswell
PSU: Be Quiet! CM BQT L8-730W PSU Pure Power
HDD: Seagate 1TB Barracuda
I loaded all the software and updated all drivers and the bios.
The pc either crashes bsod or freezes when installing certain games (star craft and Guild wars) but will play others without issue, it has crashed while opening some web pages and defraggler
I have so far:
I have swapped both the GPU, PSU and memory with my other PC but it keeps crashing while theses items cause no issues on my pc .
I have scanned the memory with Memtest but nothing shows up.
I was done a complete re-install after a format.
I have change the HDD and even installed with the 32 Bit version in-case it was the 64bit disc.
I have checked and re seated all componants including the CPU.
the only two parts i havent changed is the CPU and the Motherboard.
Here are just a few of the BSOD reports:
==================================================
Dump File : 100613-18969-01.dmp
Crash Time : 06/10/2013 12:59:23
Bug Check String : CACHE_MANAGER
Bug Check Code : 0x00000034
Parameter 1 : 00000000`00050853
Parameter 2 : fffff880`03185618
Parameter 3 : fffff880`03184e70
Parameter 4 : fffff800`02d004b4
Caused By Driver : ataport.SYS
Caused By Address : ataport.SYS+f5ad
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+75b80
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\100613-18969-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File Size : 289,312
Dump File Time : 06/10/2013 13:00:18
==================================================
==================================================
Dump File : 100613-21200-01.dmp
Crash Time : 06/10/2013 13:10:35
Bug Check String : PAGE_FAULT_IN_NONPAGED_AREA
Bug Check Code : 0x00000050
Parameter 1 : fffff280`0a480828
Parameter 2 : 00000000`00000000
Parameter 3 : fffff800`03043fa5
Parameter 4 : 00000000`00000007
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+75b80
File Description : NT Kernel & System
Product Name : Microsoft® Windows® Operating System
Company : Microsoft Corporation
File Version : 6.1.7601.18247 (win7sp1_gdr.130828-1532)
Processor : x64
Crash Address : ntoskrnl.exe+75b80
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\100613-21200-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File Size : 284,792
Dump File Time : 06/10/2013 13:11:24
==================================================
==================================================
Dump File : 100713-21684-01.dmp
Crash Time : 07/10/2013 10:34:12
Bug Check String : MEMORY_MANAGEMENT
Bug Check Code : 0x0000001a
Parameter 1 : 00000000`00005100
Parameter 2 : fffff6fc`4004fdf0
Parameter 3 : 00000000`00000003
Parameter 4 : 00000000`00000001
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+75b80
File Description : NT Kernel & System
Product Name : Microsoft® Windows® Operating System
Company : Microsoft Corporation
File Version : 6.1.7601.18247 (win7sp1_gdr.130828-1532)
Processor : x64
Crash Address : ntoskrnl.exe+75b80
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\100713-21684-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File Size : 286,400
Dump File Time : 07/10/2013 10:35:48
==================================================
Any advice (before i start to lose what hair i have left)would be much appreciated
Daveok, got bsod, bios updated 1.6B2, after sleep got blue screen
"Who Crashed"
This was probably caused by the following module: ntoskrnl.exe (nt+0x75B80)
Bugcheck code: 0x1A (0x41287, 0x30, 0x0, 0x0)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
BlueScreenView
==================================================
Filename : ntoskrnl.exe
Address In Stack : ntoskrnl.exe+ed22
From Address : fffff800`02e06000
To Address : fffff800`033ec000
Size : 0x005e6000
Time Stamp : 0x51fb06cd
Product Name : Microsoft® Windows® Operating System
File Description : NT Kernel & System
File Version : 6.1.7601.18229 (win7sp1_gdr.130801-1533)
Company : Microsoft Corporation
Full Path : C:\Windows\system32\ntoskrnl.exe
==================================================
only changes in bios i got is memory XMP profile 1 2400 Hz.
memory placed only 8gigs in 4th slot, several times even bios dont start when memory in this slot.
What this can be?
bad slot?
memory incompatibility?
I need some tips, suggestion. -
Windows 7 64 Bit Frequent BSOD
I've been running Windows 7 for awhile now with no problems, but as of two days ago I've started getting frequent BSODs. It doesn't seem to be giving me the same error every time though, I've gotten anything from System_service_exception to Memory_management to IRQL less or not equal errors. I hadn't added any new hardware at the time or updated my drivers, so I'm beginning to question whether it's software or hardware related. Any help would be appreciated.
Hi,
I would like to suggest you update the BIOS and the hardware drivers for Windows 7 first.
If the issue persists, would you please send me more information for analyzing. For your convenience, I have created a workspace for you. You can upload the information files to the following link. (Please choose "Send Files to Microsoft")
Workspace URL: https://sftasia.one.microsoft.com/choosetransfer.aspx?key=353a5034-ba00-48fc-9263-7f88d34d6e73
Password: RoNed+-0v29
Note: Due to differences in text formatting with various email clients, the workspace link above may appear to be broken. Please be sure to include all text between '(' and ')' when typing or copying the workspace link into your browser. Meanwhile, please note that files uploaded for more than 72 hours will be deleted automatically. Please ensure to notify me timely after you have uploaded the files. Thank you for your understanding.
Collect Minidump Files
=================
1. Click "Start", input "SYSDM.CPL" (without quotation marks) in the “Search” bar and press “Enter”.
2. Switch to the "Advanced" tab and click the "Settings" button under "Startup and Recovery".
3. Under "Write debugging information" section, make sure the "Small memory dump (128KB)" option is selected.
4. Make sure "%SystemRoot%\Minidump" is in the "Small dump directory" open box and click “OK”.
If the Blue Screen appears again, please refer to the following steps to collect memory dump files:
1. Click “Start”, type “%SystemRoot%\Minidump" (without quotation marks) in “Search” bar and press “Enter”.
2. Go to your Desktop, right-click on it and create a new folder named "Dump".
3. Copy all the memory dump files (looks like [Mini092008-01.dmp]) in Minidump to this folder.
4. Right-click on the Dump folder, click "Send To", and click "Compressed (zipped) Folder".
5. Please send the ZIP file to us.
If it is inconvenient for you to upload the dump files. I would like to suggest you analyze them with Debugging Tools by yourself. You may install it and it’s Symbol Packages from the following link:
http://www.microsoft.com/whdc/Devtools/Debugging/default.mspx
WinDbg will tell you the possible cause.
If no clue can be found, you may contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request. To troubleshoot this kind of kernel crash issue, we need to debug the crashed system dump. Unfortunately, debugging is beyond what we can do in the forum. Please be advised that contacting phone support will be a charged call.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Regards,
Arthur Li - MSFT
Maybe you are looking for
-
Palm Desk Top 6.2, a step backwards?
I use the Palm desktop considerably for my work schedule. I just got a new laptop which came with Vista. I downloaded the latest Palm desktop (6.2.2) and while the program works I am very disappointed that some of the features of the old version are
-
Cannot see text in large PDF file
Hi all, I've searched Google and these forums, but I have yet to find anything relating to my issue. I'm trying to view a PDF file, but I cannot see any text in Adobe Reader. I've viewed it w/ the FoxIt reader, and I can see all text there. Any idea
-
Report (sales order not delibered-not reserved)
Hello to everybody! Hoe it's going after hollidays? I need some help to know if there is any standard option to get a report in which we obtain,per material, the sales orders which haven't been still delivered and which have not any reservation assoc
-
Getting C++ Runtime Error R6025 trying to open LC form
This is a form I created with LC 8.05/Acrobat Pro 8.1, now on my client's website at http://www.rachc.org/docs/CommonsRR4Form-Guidelines.pdf -- is there something seriously wrong with this version of Live Cycle Designer? Or is it the current crop of
-
PS CS6: Texture Painting on a 3d model
I've been using Photoshop proper for quite a while, but have just recently started working with the 3d aspect. I have some tileable 2d images as source (human skin) and some importable 3d models with uv maps (human body). What i want to do is paint t