MENGE...ALV...STRUCTURE..BLANK

Hi folks,
I am using Reuse_ALV_list_display along with structure. In the structure for Menge field display i want BLANK space when quantity is ZERO. Im getting 0.000 or 0 for ZERO, i want blank space to be displayed instead of zeros...I dont know what data element i can give so that in my structure i maintain MENGE field instead of quan datatype.
Thanks.

Hi!
Did you use fieldcat ?
If you use fieldcat. Do as following:
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      I_STRUCTURE_NAME = 'SPFLI'
    CHANGING
      CT_FIELDCAT      = GT_FIELDCAT.
LOOP AT GT_FIELDCAT INTO GS_FIELDCAT .
    CASE GS_FIELDCAT-FIELDNAME .
      WHEN 'CARRID'.
          (Some properties was set here)
          GS_FIELDCAT-NO_ZERO   = 'X'. " Example
    END CASE.
END LOOP.
Then Zero field will display as blank.
Thanks & Regard!
huandv

Similar Messages

Set Filter in ALV report, blank screen returned

I have a standard ALV report (uses REUSE_ALV_GRID_DISPLAY). The user has to be able to filter the results based on entries from certain columns.
When I try to filter any columns other than a column with a date a blank screen is returned.
This filtering problem only exists with the Single value field. I can filter the results in the "select ranges", "exclude values" and "exclude ranges" without any problems.
Any suggestions?
Edited by: Damien Crowe on Jul 6, 2009 5:09 PM
Set the fieldcatalog-edit_maskto "==ALPHA".
Edited by: Damien Crowe on Jul 14, 2009 5:35 PM

what was the solution to this problem?
Thanks

Preview and Download in ALV report blank

Dear All,
I have a problem. When user preview and download to local save (txt, xls, etc) from report in ALV format, user get blank preview and blank file.
I use 2 FM.
1st i use FM REUSE_ALV_LIST_LAYOUT_INFO_GET to get fieldcat because user want to download after customize the layout (example default there are 5 field then user hide 2 field so only 3 field are displayed and downloaded).
2nd I use FM REUSE_ALV_GRID_DISPLAY to display as ALV format. and user can download via download button default in ALV format.
so, anyone.. could u help me ??
Thanks

Hi,
ok I generaeted the fieldcatalog for the above and try to execute as this as I described above
i am giving the code just check it.
type-pools SLIS.
data : lv_vbeln type vbak-vbeln.
select-options : so_vbeln for lv_vbeln.
initialization.
so_vbeln-low = '4970'.
so_vbeln-high = '4975'.
append so_vbeln.
data : lt_fcat type SLIS_T_FIELDCAT_ALV,
       ls_fcat like line of lt_fcat.
types : begin of ty_vbak,
         vbeln type vbak-vbeln,
         erdat type vbak-erdat,
         erzet type vbak-erzet,
         ernam type vbak-ernam,
       end of ty_vbak.
data : lt_vbak type standard table of ty_vbak,
       ls_vbak type ty_vbak.
data : ls_variant like DISVARIANT.
data : ls_layo type SLIS_LAYOUT_ALV.
start-of-selection.
perform getvbak.
if sy-subrc eq 0.
perform displayvbak.
endif.
FORM GETVBAK .
select vbeln erdat erzet ernam from vbak
into table lt_vbak
where vbeln in so_vbeln.
ENDFORM.                    " GETVBAK
FORM DISPLAYVBAK .
clear ls_fcat.
ls_fact-fieldname = 'VBELN'.
ls_fcat-colpos = 1.
ls_fcat-seltext_m = 'Sales No'.
ls_fcat-outputlen = 10.
append ls_fcat to lt_fcat.
clear ls_fcat.
ls_fact-fieldname = 'ERDAT'.
ls_fcat-colpos = '2'.
ls_fcat-seltext_m = 'Date'.
ls_fcat-outputlen = 10.
append ls_fcat to lt_fcat.
clear ls_fcat.
ls_fact-fieldname = 'ERZET'.
ls_fcat-colpos = '3'.
ls_fcat-seltext_m = 'Time'.
ls_fcat-outputlen = 10.
append ls_fcat to lt_fcat.
clear ls_fcat.
ls_fact-fieldname = 'ERNAM'.
ls_fcat-colpos = '4'.
ls_fcat-seltext_m = 'Created By'.
ls_fcat-outputlen = 10.
append ls_fcat to lt_fcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = sy-repid
   IS_LAYOUT                         = ls_layo
   IT_FIELDCAT                       = lt_fcat[]
   I_SAVE                            = 'X'
   IS_VARIANT                        = ls_variant
TABLES
    T_OUTTAB                          = lt_vbak[].
ENDFORM.                    " DISPLAYVBAK
Thanks & Regards,
Raghunadh K

ALV returning blank output

Hi all,
I'm converting a report into ALV format. My problem over is that my ALV output is blank.
FYI, I've checked on the internal table that I passed into the function 'REUSE_ALV_GRID_DISPLAY', there are 50 rows of data inside the internal table. Using the same internal table, I can even write out the report.
Even when I try to pass it in for ALV output, everything is display nicely (title, column header, column size) except the content are 50 blank rows.
Anyone can help? Thanks in advance!
Regards,
JT

Hi all,
I've changed the order of field catalog to be the same as list display order as well as all the field name to upper-case.
The output I get even worse. It only show me title and a blank grey page.
I did ALV report for 3 times previously without any problem. This is the first time I encountered such problem and I've been debugging the problem for the past 4 days.
Below is part of my code.
TYPE-POOLS: SLIS.
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      I_SORT TYPE SLIS_T_SORTINFO_ALV WITH HEADER LINE,
      I_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER WITH HEADER LINE,
      I_EVENTS TYPE SLIS_T_EVENT WITH HEADER LINE,
      F2CODE LIKE SY-UCOMM VALUE '&ETA',
      LAYOUT TYPE SLIS_LAYOUT_ALV,
      GT_SLIS_T_EVENTS TYPE SLIS_T_EVENT,
      GW_SLIS_EVENTS TYPE SLIS_ALV_EVENT,
      C_PROG LIKE SY-REPID,
      INX2 TYPE SY-TABIX.
TYPES: BEGIN OF TYPE_ALV,
         LZONE     LIKE KNA1-LZONE,
         NAME1     LIKE KNA1-NAME1 ,
         VTEXT     LIKE TZONT-VTEXT,
         COST      TYPE P DECIMALS 2,
         NTGEW     TYPE P DECIMALS 2,
         RMMT      TYPE P DECIMALS 2,
         MATKL     LIKE LIPS-MATKL,
       END OF TYPE_ALV.
DATA: REC_ALV TYPE TYPE_ALV OCCURS 0 WITH HEADER LINE.
Move data into rec_alv
    CLEAR: rec_alv.
    rec_alv-lzone = rec-lzone.
    rec_alv-name1 = rec-name1.
    rec_alv-vtext = rec-vtext.
    rec_alv-cost = cost_text.
    rec_alv-ntgew = btgew_text.
    rec_alv-rmmt = rmmt_text.
    rec_alv-matkl = rec-matkl.
    APPEND rec_alv.
FORM BUILD_FIELDCAT
FORM BUILD_FIELDCAT.
PERFORM FIELDCAT USING:
    'REC_ALV' ' ' 'LZONE' '20' 'Transporter'                   ' ' ' ',
    'REC_ALV' ' ' 'NAME1' '35' 'Customer'                     ' ' ' ',
    'REC_ALV' ' ' 'VTEXT' '40' 'Area Coverage'               ' ' ' ',
    'REC_ALV' ' ' 'COST'   '15' 'Transport Cost Amount' ' ' 'X',
    'REC_ALV' ' ' 'NTGEW' '15' 'Sales Volume'             ' ' 'X',
    'REC_ALV' ' ' 'RMMT'   '15' 'Transport Cost'             ' ' 'X',
    'REC_ALV' ' ' 'MATKL' '20' 'Material Group'             ' ' ' '.
ENDFORM.
FORM BUILD_SORTTABLE
FORM BUILD_SORTTABLE.
PERFORM SORTTABLE USING:
    '1' 'LZONE' 'REC_ALV' 'X' ' ' ' ',
    '2' 'NAME1' 'REC_ALV' 'X' ' ' ' ',
    '3' 'VTEXT' 'REC_ALV' 'X' ' ' ' ',
    '4' 'COST' 'REC_ALV' 'X' ' ' 'X',
    '5' 'NTGEW' 'REC_ALV' 'X' ' ' 'X',
    '6' 'RMMT' 'REC_ALV' 'X' ' ' 'X',
    '7' 'MATKL' 'REC_ALV' 'X' ' ' ' '.
ENDFORM.
FORM DISPLAY_ALV
FORM DISPLAY_ALV USING TITLE TYPE C.
C_PROG = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM = C_PROG
      IT_FIELDCAT = I_FIELDCAT[]
      IS_LAYOUT = LAYOUT
      I_GRID_TITLE = TITLE
      IT_SORT = I_SORT[]
      I_SAVE = 'A'
    TABLES
      T_OUTTAB = REC_ALV
    EXCEPTIONS
      PROGRAM_ERROR = 1
      OTHERS        = 2.
ENDFORM.

ALV wrong (blank) Cell Color in Checkbox-Column

I have several columns with checkboxes in an ALV. (Editor = Checkbox)
The color is set with set_cell_design_fieldname( ).
Some of the cells are set to invisible with set_visible_fieldname( )
For these cells the value for the cell design is cl_wd_abstr_master_table_col=>e_cell_design-standard.
Some of these (invisible) cells are displayed with white color.
Most of the cells are correctly displayed in light blue.
Service-Pack level is 15. (SAP_BASIS)
Thanks in advance
Bernhard

Valid values for Color are from 1 to 7. So in your Loop at IT_EKPO as you are assigning LD_Color with Sy-tabix value, the first 7 are getting different colors and the remaining 8,9,10 are getting default color as color value 8,9,10 are invalid. Check the below logic which would generate 1 to 7 for the sy-tabix value 1 to 10.
LOOP AT IT_EKPO into wa_ekpo.
LD_color = ( SY-TABIX - 1 ) mod 7 + 1. " Returns 1 to 7 for different Sy-tabix values
WA_CELLCOLOR-FNAME = 'EBELN'.
WA_CELLCOLOR-COLOR-COL = LD_color.
WA_CELLCOLOR-COLOR-INT = '1'.
..... " Existing logic
ENDLOOP.

ALV - show blank cell if numeric value is zero

Hi
I have an ALV with serveral numeric and decimal fields.
Is it possible without a lot of effort (like assigning a separate cell with the visibilty attribute for each cell) to hide the cell content if the value is zero instead of showing 0 or 0,00 and so on .
Thanks
Thomas

>
Thomas Jetzinger wrote:
> Hi
>
> I have an ALV with serveral numeric and decimal fields.
>
> Is it possible without a lot of effort (like assigning a separate cell with the visibilty attribute for each cell) to hide the cell content if the value is zero instead of showing 0 or 0,00 and so on .
>
> Thanks
> Thomas
I have a feeling that a cell variant or dynamic manipulation of visibility is going to be the correct answer. The data type rules will always fire for the conversion exit on output. You could maybe create a custom domain with its onw conversion exit but I would think that would actually lead to more work than just using hte cell variant/visibility property.

Explicit Search Helps Short-Dump in Editable ALV with included structure

I have an editable ALV grid defined as follows:
TYPES: BEGIN OF gs_outtab200.
    TYPES: row_indx(4)      TYPE n.
    TYPES: multipurp        TYPE c.
    INCLUDE structure zxrfwc_test.
TYPES: end of gs_outtab200.
DATA:
    gt_outtab200             TYPE TABLE OF gs_outtab200,
    wa_outtab200             TYPE gs_outtab200.
The included structure zxrfwc_test has a component (field) which is defined with a data element that has an explicit search helps associated with it.
I know that this search help is working properly because it works fine in the program's selection screen.
But when I invoke the search help from within a column of the ALV itself, I get a short dump with a "GETWA_NOT_ASSIGNED" error.
I have done plenty of editable ALVs with search helps defined on the data elements and never encountered this problem.
Am I hitting this problem because the zxrfwc_test structure is defined within the
gs_outtab200 structure ??
If not, what is causing this problem. (Please note that I have set ls_fcat-F4AVAILABL = 'X' in the fieldcat routine - this doesn't seem to help at all.)
Please advise!!!!
I'm really stuck on this one because it's always worked before when I'm not dealing with a dictionary structure that's included within a larger ALV structure.
Thanks.

Hi,
How you are creating your field catalog?
Try to create a field catalog in the following way giving reference to your structure. is it possible for you create a DDIC structure as same as
TYPES: BEGIN OF gs_outtab200.
    TYPES: row_indx(4)      TYPE n.
    TYPES: multipurp        TYPE c.
    INCLUDE structure zxrfwc_test.
TYPES: end of gs_outtab200.
* Form f_generate_fieldcatalog                                         *
* Form generate the field catalog table                                *
form f_generate_fieldcatalog.
* Private variable
data : v_structure like dd02l-tabname.   " Table Name
v_structure = c_yatt_alv.                      " Structure Name
* Build the fieldcat according to DDIC structure YATT_ALV:
call function 'LVC_FIELDCATALOG_MERGE'
    exporting
      i_structure_name       = v_structure
      i_client_never_display = c_x
    changing
      ct_fieldcat            = i_fieldcat[].
endform.                                 " F_generate_fieldcatalog
a®

ALV grid is not displaying few fields of final internal table of type DMBTR

hello frnds,
i am displaying 10 fields in ALV grid using field catalog.
among them five fields are currency fields on which i doing some arithematic operations. but all these fields are not getting displayed in alv grid.
here is my code....
declaring final strucutre to generate report
TYPES:BEGIN OF ty_final,
          gjahr   TYPE gjahr,       " Year
          wwert   TYPE wwert_d,     " Traslation date
          bukrs   TYPE bukrs,       " company code
          hkont   TYPE hkont,       " General ledger account
          txt20   TYPE txt20_skat, " Account name
          belnr   TYPE belnr_d,     " Purchase order number
          shkzg   TYPE shkzg,       " Dt/Cr indicator
          dmbtr1   TYPE dmbtr,       " Ammount in local currency
          v_alc   TYPE dmbtr,       " Ammount in local currency
          wrbtr   TYPE wrbtr,       " Ammount in foreign currency
          ebeln   TYPE ebeln,       " Purchase order number
          ebelp   TYPE ebelp,       " Item number
          matnr   TYPE matnr,       " Material number
          menge   TYPE menge_d,     " Qunatity
          meins   TYPE meins,       " Unit of measure
          stprs   TYPE stprs,       " Std material master
          v_iv    TYPE dmbtr,       " Invoice value
          pswsl   TYPE pswsl,       " Currency
          v_erc   TYPE dmbtr,       " Exchange rate calculated
          v_op    TYPE dmbtr,       " Order price
          v_uos   TYPE dmbtr,       " Unit order to stock
          v_io    TYPE dmbtr,       " Invoice to order
          v_uv    TYPE dmbtr,       " Unit value
          v_t     TYPE dmbtr,       " Total
          v_d     TYPE dmbtr,       " Differecne
          netpr   TYPE bprei,       " Net price in purchasing document
          v_total TYPE dmbtr,       " Total
          v_os    TYPE dmbtr,       " Order to stock
          v_ito   TYPE dmbtr,       " Invoice to order
          saknr   TYPE saknr,       " G/L account number
       END OF ty_final.
FORM move_data.
IF NOT i_bseg[] IS INITIAL.
    LOOP AT i_bseg INTO wa_bseg.
      wa_final-gjahr = wa_bseg-gjahr.
      wa_final-bukrs = wa_bseg-bukrs.
      wa_final-hkont = wa_bseg-hkont.
      wa_final-belnr = wa_bseg-belnr.
      wa_final-shkzg = wa_bseg-shkzg.
      wa_final-wrbtr = wa_bseg-wrbtr.
      wa_final-ebeln = wa_bseg-ebeln.
      wa_final-ebelp = wa_bseg-ebelp.
      wa_final-matnr = wa_bseg-matnr.
      wa_final-menge = wa_bseg-menge.
      wa_final-meins = wa_bseg-meins.
      wa_final-pswsl = wa_bseg-pswsl.
      wa_final-dmbtr1 = wa_bseg-dmbtr.
      wa_final-saknr = wa_bseg-saknr.
      wa_final-v_total = wa_bseg-dmbtr.
      READ TABLE i_bkpf INTO wa_bkpf WITH KEY bukrs = wa_bseg-bukrs.
      IF sy-subrc = 0.
        wa_final-wwert = wa_bkpf-wwert.
      ENDIF.
     CLEAR wa_bkpf.
      READ TABLE i_mbew INTO wa_mbew WITH KEY matnr = wa_bseg-matnr.
      IF sy-subrc = 0.
        wa_final-stprs = wa_mbew-stprs.
      ENDIF.
     CLEAR wa_mbew.
      READ TABLE i_ekpo INTO wa_ekpo WITH KEY ebeln = wa_bseg-ebeln.
      IF sy-subrc = 0.
        wa_final-netpr = wa_ekpo-netpr.
      ENDIF.
     CLEAR wa_ekpo.
      READ TABLE i_skat INTO wa_skat WITH KEY saknr = wa_bseg-saknr.
      IF sy-subrc = 0.
        wa_final-txt20 = wa_skat-txt20.
      ENDIF.
calculating output values
      IF wa_bseg-shkzg = 'H'.
        wa_final-v_alc = -1 * wa_bseg-dmbtr.
      ELSEIF wa_bseg-shkzg = 'S'.
        wa_final-v_alc = 1 * wa_bseg-dmbtr.
      ENDIF.
     DATA : l_c_v_alc TYPE p DECIMALS 2,
     l_c_v_iv TYPE p DECIMALS 2.
     l_c_v_alc = wa_final-v_alc.
      IF wa_bseg-menge NE 0.
        wa_final-v_iv = wa_bseg-dmbtr / wa_bseg-menge.
      ENDIF.
      IF wa_bseg-dmbtr NE 0.
        wa_final-v_erc = wa_bseg-wrbtr   / wa_final-dmbtr1.
      ENDIF.
      IF wa_final-v_erc NE 0.
        wa_final-v_op   = wa_ekpo-netpr   / wa_final-v_erc.
      ENDIF.
      wa_final-v_uos = wa_mbew-stprs   - wa_final-v_op.
      wa_final-v_io   = wa_final-v_iv   + wa_final-v_uos.
      wa_final-v_uv   = wa_final-v_uos + wa_final-v_io.
      wa_final-v_t    = wa_final-v_uv   + wa_bseg-menge.
      wa_final-v_d    = wa_final-v_t    - wa_final-v_alc.
      wa_final-v_os   = wa_final-v_uos * wa_bseg-menge.
      wa_final-v_ito = wa_final-v_io   * wa_bseg-menge.
      CLEAR wa_bseg.
      APPEND wa_final TO i_final.
      CLEAR wa_final.
    ENDLOOP.
ENDIF.
ENDFORM.                    "data_retrieval
*&      Form build_fieldcat
      text
--> p1        text
<-- p2        text
FORM build_fieldcat.
CLEAR wa_fieldcat.
* TYPES : v_alc TYPE dmbtr. "curr. " decimal 2.
DATA: l_c_v_alc TYPE p DECIMALS 2,
l_c_v_iv TYPE p DECIMALS 2 .
l_c_v_alc = v_alc.
l_c_v_iv = v_iv.
Constant Declarations.
CONSTANTS:
            l_c_gjahr(5)   TYPE c VALUE 'GJAHR',      " Year
            l_c_wwert(5)   TYPE c VALUE 'WWERT',      " Traslation date
            l_c_bukrs(5)   TYPE c VALUE 'BUKRS',      " company code
            l_c_hkont(5)   TYPE c VALUE 'HKONT',      " General ledger account
            l_c_txt20(10) TYPE c VALUE 'TXT20',      " Account name
            l_c_belnr(5)   TYPE c VALUE 'BELNR',      " Doc number
            l_c_shkzg(5)   TYPE c VALUE 'SHKZG',      " Dt/Cr indicator
            l_c_dmbtr(5)   TYPE c VALUE 'DMBTR1',      " Ammount in local currency
           " l_c_v_alc      TYPE c VALUE 'V_ALC',      " Ammount in local currency
            l_c_wrbtr(5)   TYPE c VALUE 'WRBTR',      " Ammount in foreign currency
            l_c_ebeln(5)   TYPE c VALUE 'EBELN',      " Purchase order number
            l_c_ebelp(5)   TYPE c VALUE 'EBELP',      " Item number
            l_c_matnr(5)   TYPE c VALUE 'MATNR',      " Material number
            l_c_menge(7)   TYPE c VALUE 'MENGE',      " Qunatity
            l_c_meins(5)   TYPE c VALUE 'MEINS',      " Unit of measure
            l_c_stprs(5)   TYPE c VALUE 'STPRS',      " Std material master
           " l_c_v_iv(4)    TYPE c VALUE 'V_IV',           " Invoice value
            l_c_pswsl(5)   TYPE c VALUE 'PSWSL',      " Currency
            l_c_v_erc(5)   TYPE c VALUE 'V_ERC',      " Exchange rate calculated
            l_c_v_op(4)    TYPE c VALUE 'V_OP',       " Order price
            l_c_v_uos(5)   TYPE c VALUE 'V_UOS',      " Unit order to stock
            l_c_v_io(4)    TYPE c VALUE 'V_IO',       " Invoice to order
            l_c_v_uv(4)    TYPE c VALUE 'V_UV',       " Unit value
            l_c_v_t(3)     TYPE c VALUE 'V_T',        " Total
            l_c_v_d(3)     TYPE c VALUE 'V_D',        " Differecne
            l_c_netpr(5)   TYPE c VALUE 'NETPR',      " Net price in purchasing document
            l_c_v_total(7) TYPE c VALUE 'V_TOTAL',    " Total
            l_c_v_os(4)    TYPE c VALUE 'V_OS',      " Order to stock
            l_c_v_ito(5)   TYPE c VALUE 'V_ITO',      " Invoice to order
            l_c_saknr(5)   TYPE c VALUE 'SAKNR',      " G/L account number
            l_c_i_final(7) TYPE c VALUE 'I_FINAL'.    " Final internal table
Fieldcat for fiscal year
wa_fieldcat-col_pos   = 1.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_gjahr.
wa_fieldcat-seltext_m = text-007.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Translation date
wa_fieldcat-col_pos   = 2.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_wwert.
wa_fieldcat-seltext_m = text-008.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Company code
wa_fieldcat-col_pos   = 3.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_bukrs.
wa_fieldcat-seltext_m = text-009.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for General ledger account
wa_fieldcat-col_pos   = 4.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_hkont.
wa_fieldcat-seltext_m = text-010.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Account name
wa_fieldcat-col_pos   = 5.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_txt20.
wa_fieldcat-seltext_m = text-011.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Doc number
wa_fieldcat-col_pos   = 6.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_belnr.
wa_fieldcat-seltext_m = text-012.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Dt/Cr indicator
wa_fieldcat-col_pos   = 7.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_shkzg.
wa_fieldcat-seltext_m = text-013.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Ammount in local currency
wa_fieldcat-col_pos   = 8.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = 'DMBTR1'.
wa_fieldcat-seltext_m = text-014.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Ammount in local currency
wa_fieldcat-col_pos   = 9.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = 'V_ALC'.
wa_fieldcat-seltext_m = text-015.
wa_fieldcat-ref_fieldname = 'DMBTR'.
wa_fieldcat-no_sign   = 'X'.
wa_fieldcat-do_sum    = c_x.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Ammount in foreign currency
wa_fieldcat-col_pos   = 10.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_wrbtr.
wa_fieldcat-seltext_m = text-016.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Purchse order number
wa_fieldcat-col_pos   = 11.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_ebeln.
wa_fieldcat-seltext_m = text-017.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Item No
wa_fieldcat-col_pos   = 12.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_ebelp.
wa_fieldcat-seltext_m = text-018.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Material number
wa_fieldcat-col_pos   = 13.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_matnr.
wa_fieldcat-seltext_m = text-019.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Qunatity
wa_fieldcat-col_pos   = 14.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_menge.
wa_fieldcat-seltext_m = text-020.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Unit of measure
wa_fieldcat-col_pos   = 15.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_meins.
wa_fieldcat-seltext_m = text-021.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Std material master
wa_fieldcat-col_pos   = 16.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_stprs.
wa_fieldcat-seltext_m = text-022.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Invoice value,
wa_fieldcat-col_pos   = 17.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = 'V_IV'.
wa_fieldcat-seltext_m = text-023.
wa_fieldcat-ref_fieldname = 'DMBTR'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Currency
wa_fieldcat-col_pos   = 18.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_pswsl.
wa_fieldcat-seltext_m = text-024.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Exchange rate calculated
wa_fieldcat-col_pos   = 19.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = 'V_ERC'.
wa_fieldcat-seltext_m = text-025.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Order price
wa_fieldcat-col_pos   = 20.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_v_op.
wa_fieldcat-seltext_m = text-026.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Unit order to stock
wa_fieldcat-col_pos   = 21.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_v_uos.
wa_fieldcat-seltext_m = text-027.
wa_fieldcat-do_sum    = c_x.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Invoice to order
wa_fieldcat-col_pos   = 22.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_v_io.
wa_fieldcat-seltext_m = text-028.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Unit value
wa_fieldcat-col_pos   = 23.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_v_uv.
wa_fieldcat-seltext_m = text-029.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Total
wa_fieldcat-col_pos   = 24.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_v_t.
wa_fieldcat-seltext_m = text-030.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Difference
wa_fieldcat-col_pos   = 25.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_v_d.
wa_fieldcat-seltext_m = text-031.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Net Price in Purchasing Document
wa_fieldcat-col_pos   = 26.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_netpr.
wa_fieldcat-seltext_m = text-032.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Total
wa_fieldcat-col_pos   = 27.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_v_total.
wa_fieldcat-seltext_m = text-033.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Order to stock
wa_fieldcat-col_pos   = 28.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_v_os.
wa_fieldcat-seltext_m = text-034.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Invoice to order
wa_fieldcat-col_pos   = 29.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_v_ito.
wa_fieldcat-seltext_m = text-035.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
fieldcat for invoice to order
wa_fieldcat-col_pos   = 30.
wa_fieldcat-tabname   = l_c_i_final.
wa_fieldcat-fieldname = l_c_saknr.
wa_fieldcat-seltext_m = text-035.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
ENDFORM.                    "build_fieldcat

Hi romanch,
defining the field catalog you must reference all currency fields to the respective currency key field (type CUKY).
<alv_fieldcat>-cfieldname         = 'HWAER'.
This is sample for alv output of a currency field. The alv structure has a field HWAER which carries the currency key, e.g. USD or so.
Obviously you do not provide a cutrrency key for your values. If they are initial (zero), ALV will not display them as 0,00 but leave the field empty if the reference too currency key is not established.
If you define a DDIC structure for the ALV output this refernce is enforced. You can pass the DDIC structure name to the ALV and don not have to create the field catalog manually.
Regards,
Clemens

Field in alv

Folks
I have a requirement where i need to add a new field to FB03 transaction at item level. I found no user exit to add a new column. But when i look into the program it is nothing but an ALV report that displays the columns. Now i want to add a new field to the alv structure. How can i proceed to do this? Do i have to go for a mod to enhance the screen?
The program name is sapmf05l- Include MF05LTOP_ALV
Thanks in advace.
Raj

Hi
- Update the structure RFPOSX and RFPOS using append structure where you insert your new fields by trx SE11.
- Run the report RFPOSXEXTEND: this report'll update the structure RFPOSXEXT in order to the definition of RFPOSX, so it'll insert your new fields.
- Trx SE37: create a copy of fm SAMPLE_INTERFACE_00001650, here insert the abap codes you need to fill your new fields.
- Trx BF24: Create your product and set it as active.
- Trx BF34: Assign the event 00001650 to your product and insert the name of your function module.
U can use trx FIBF instead of BF24 and BF34.
I don't remember, but I believe you have to run the report RFPOSXEXTEND in all enviroments.
That's all.

ALV: How do I suppress repeating values and page breaks on printed output?

Good day, everyone!
First, I've done a LOT of searching trying to find the answer to my question, but I'm not finding an answer. If this has already been answered and you can point me to a URL, I would appreciate it.
Here's my issue: I have a rather simple ALV report. It has the columns of Person ID, Personnel Number, For Period, In Period, and Amount. I sort by Person ID and Personnel Number, and if the value repeats on the next line of the report, I want to suppress it (make it blank).
I thought the answer was in the following code, where I set the GROUP attribute to asterisk:
CLEAR sortcat_ln.
sortcat_ln-spos      = '1'.
sortcat_ln-fieldname = 'PERSONID_EXT'.
sortcat_ln-up        = c_true.
sortcat_ln-group     = '*'.
APPEND sortcat_ln TO sortcat.
CLEAR sortcat_ln.
sortcat_ln-spos      = '2'.
sortcat_ln-fieldname = 'PERNR'.
sortcat_ln-up        = c_true.
sortcat_ln-group     = '*'.
APPEND sortcat_ln TO sortcat.
It looks PERFECT on the screen -- the values are suppressed if they repeat, and everything appears together on one screen. However, when I print the report, two things happen: 1) The values repeat on each row, even if they are the same, and 2) I get a page break after each Person ID / Personnel Number combination.
I now realize that I can't use the GROUP attribute. Is there some other way in ALV to blank these repeating values and keep all the rows together on one page, rather than page breaking after each value change?
Thanks!
Dave

Hi
Same requirement i had before, when i try to print preview. the output of the grid display is in grouping is ok, but when i print preview or print it doesnt cater the grouping and page breaks, so what i did i modify the internal table use in alv , after hitting the print preview/print with the format desired by the user. you can do that in user-command. see code below
FORM user_command USING r_ucomm TYPE syucomm
                        rs_selfield TYPE slis_selfield.
DATA lt_sort TYPE lvc_t_sort.
CASE r_ucomm.
    WHEN '&RNT_PREV' OR '&RNT'.
      t_final_x[] = t_final[].
      PERFORM clear_redundant.
      PERFORM set_sort_criteria USING lt_sort.
    WHEN '&F03' OR '&PRINT_BACK_PREVIEW'.
      t_final[] = t_final_x[].
    WHEN OTHERS.
ENDCASE.
ENDFORM.                    "user_command
hope it helps

Infospoke BADI -- no change in structure?

Hello Experts,
We have three fields in: rsbo > edit infospoke INF1> transform
1) Source structure
2) Target structure
3) Addin Implementation.
-- I want to create a BADI and do not want to change the structure. But set some values in another table when INF1 is run.
-- Wondering if it is still possible to use BADI in this situation.
-- So can i leave the target structure blank or repeat it with the source structure itself.
Thanks,
Sweatha

You need to fill it with the source structure in the definition and move the fields in your implementation (probably by move-corresponding). Otherwise you're free to fill as many other database tables as you like.
Best regards
Dirk

DrillDown in ALV for fixed values of domains

Hi,
i want to create an ALV Grid with an structure that has data elements with domains containing fixed values.
As far as i know, in Table Controls and other dynpro fields refering to such domains, the drilldown function is automatically available.
In an ALV-Grid the values are available with the F4-Button.
Ok, you can select a value, but the value is shown in the grid is the fixed value not the short text of the value like it is in Table Controls. What I did is to implement an conversion exit to show the short text in the grid, but I am not really satisfied.
What I ask you: Is there a possability to show a field of the ALV-Structure with drilldown functionality automatically, when the domain has fixed values?
Thanks in Advance
Michael

Hi Michael,
I think I have found the solution to your problem. When you call the method SET_DROP_DOWN_TABLE of the ALV Grid, you can see that there are two tables parameters (both of which are optional).
You can use the second tables parameter to give the short text of your field-value.
Consider the following code snippet.
==========================
data : lt_dropdown_with_alias type LVC_T_DRAL,
       ls_dropdown_with_alias type LVC_S_DRAL.
ls_dropdown_with_alias-handle = '1'.
ls_dropdown_with_alias-int_value = 'T'.
ls_dropdown_with_alias-value = 'True'.
append ls_dropdown_with_alias to lt_dropdown_with_alias.
ls_dropdown_with_alias-handle = '1'.
ls_dropdown_with_alias-int_value = 'F'.
ls_dropdown_with_alias-value = 'False'.
append ls_dropdown_with_alias to lt_dropdown_with_alias.
call method ALV_GRID->set_drop_down_table
            exporting IT_DROP_DOWN_ALIAS = lt_dropdown_with_alias.
==========================
Obviously, <b>int_value</b> is the internal value and <b>value</b> is the text that you want to be displayed.
Hope this helps.
Regards,
Anand Mandalika.
P.S. I'm almost certain that this code will work. If it does, please do reward the points.

ALV: how to disable editable cell and F4 in certain rows only.

I am building a table maintenance front-end with an ALV grid using OOP concept. Certain fields are editable and also have customised search helps assigned to them in the ALV structure defined for the grid. What I want is where I have identified an entry in my database table as being locked by another user, I want to grey the line out on the ALV grid so that the entry cannot be edited and not have f4 input whilst this entry is locked by another user.
I can grey the line out or disable F4 but not both at the same time. If I disable the cells of the row concerned using MC_STYLE_DISABLED, the F4 is still active and will change the contents of the cell concerned via the data_changed event method in CL_GUI_ALV_GRID.
I have used MC_STYLE_DISABLED where I have declared a layout in my table similiar to this:
DATA: BEGIN OF OUTPUT OCCURS 0,
FIELD1,
FIELD2,
STYLE TYPE LVC_T_STYL,
LOCK TYPE C.
END OF OUTPUT.
DATA: ls_celltab TYPE lvc_s_styl.
* Where lock identified, field LOCK set to 'X'.
LOOP AT OUTPUT where lock = 'X'.
ls_celltab-fieldname = 'FIELD1'.
ls_celltab-style = cl_gui_alv_grid=>mc_style_disabled.
APPEND ls_celltab TO OUTPUT-STYLE.
ls_celltab-fieldname = 'FIELD2'.
ls_celltab-style = cl_gui_alv_grid=>mc_style_disabled.
APPEND ls_celltab TO OUTPUT-STYLE.
ENDIF.
append OUTPUT.
I have tried adding MC_STYLE_F4_NO to field LS_CELLTAB-STYLE2 but this does not do both actions atthe same time.
Can anyone suggest what I might be doing wrong or an alternative way around this?
Many thanks
Regards
Larissa

As I have explained, I have fields that are editable AND are F4 enabled. What I want is for certain rows of the ALV that I do not want any procesing to occur to make all fields in that row not available for input AND not f4 enabled. I read a lock using a lock object. If the entry in my ALV matches the key locked in the lock object, I want that line to be in display mode only in the ALV with no F4 help being able to be called. It happens on the grid frontend when I press enter and have checked if any of my entries in my ALV are already locked by another user. The code is too long to post here. I can disbale the editable fields using MC_STYLE_DISABLED as described above but then the little drop down to enable F4 input is still visible against the field.
I have got round it by calling the f4 in event HANDLE_ON_F4 to not go via the search help and set er_event_data->m_event_handled = c_yes so that the F4 hit list does not appear, but I want to get rid of the drop down marker in that field in that instance.
Hope this is a little clearer now.
Larissa

ALV - How to set selected rows into internal table

Hi all,
I am tying to set with an 'X' flag the selected rows in my ALV using an internal table that contains all rows showed.
More exactly I have tried to follow these steps.
1) I have added the filed SEL (type SEL) to my ALV structure zrt_bo_slabsend and I defined my internal table in this way
     DATA: gt_report TYPE STANDARD TABLE OF zrt_bo_slabsend,
                gw_report TYPE zrt_bo_slabsend.
2) I have set gw_layo-box_fname = 'SEL' to gw_layo (ALV layout)
Pressing the "delete button" that I have insert on the top of the ALV, I intercept correctly my user command and I call a form (named "delete_lines") where I have this abap code
FORM delete_lines.
    DATA: l_subrc          LIKE sy-subrc,
        lw_grid_settings LIKE lvc_s_glay.
gw_layo-box_fname         = 'SEL'.
                                 "set field name to store row selection
gw_layo-edit              = 'X'. "makes whole ALV table editable
gw_layo-zebra             = 'X'.
gv_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY_LVC'
exporting
      i_callback_program       = gv_repid
     i_callback_pf_status_set = gc_status
     i_callback_user_command = gc_user_command
     is_layout_lvc            = gw_layo
     it_fieldcat_lvc          = gw_fkat
     i_grid_settings          = lw_grid_settings
      i_save                   = 'X'
      is_variant               = variant
      it_events                = gt_events
    TABLES
      t_outtab                 = gt_report
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
LOOP AT gt_report ASSIGNING <report> WHERE SEL = 'X'.
    DELETE gt_report.
ENDLOOP.
ENDFORM.
I'd like to select many rows in my ALV report, than by pressing the delete button I'd like to see a refresh of my ALV, without the selected rows. I want to save it only at the end of my action, only by pressing the save button.
Any suggestion about the abap code will be well appreciated.
Thanks in advance for your kind help.
Regards.
    Giovanni

Hi Giovanni,
I am using the method:-
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
*   I_INTERFACE_CHECK                 = ' '
*   I_BYPASSING_BUFFER                =
*   I_BUFFER_ACTIVE                   =
   I_CALLBACK_PROGRAM                = gd_REPID
   I_CALLBACK_PF_STATUS_SET          = 'UDIT'
   I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
*   I_CALLBACK_TOP_OF_PAGE            = ' '
*   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
*   I_CALLBACK_HTML_END_OF_LIST       = ' '
*   I_STRUCTURE_NAME                  =
*   I_BACKGROUND_ID                   = ' '
   I_GRID_TITLE                      = 'Mainatin cell entry'
*   I_GRID_SETTINGS                   =
   IS_LAYOUT_LVC                     = GS_LAYOUT
   IT_FIELDCAT_LVC                   = I_FIELDCAT[]
*   IT_EXCLUDING                      =
*   IT_SPECIAL_GROUPS_LVC             =
*   IT_SORT_LVC                       =
*   IT_FILTER_LVC                     =
*   IT_HYPERLINK                      =
*   IS_SEL_HIDE                       =
   I_DEFAULT                         = 'X'
*   I_SAVE                            = 'X'
*   IS_VARIANT                        =
   IT_EVENTS                         =
   IT_EVENT_EXIT                     =
*   IS_PRINT_LVC                      =
*   IS_REPREP_ID_LVC                  =
   I_SCREEN_START_COLUMN             = 30
   I_SCREEN_START_LINE               = 14
   I_SCREEN_END_COLUMN               = 120
   I_SCREEN_END_LINE                 = 25
*   IT_EXCEPT_QINFO_LVC               =
*   I_HTML_HEIGHT_TOP                 =
*   I_HTML_HEIGHT_END                 =
* IMPORTING
*   E_EXIT_CAUSED_BY_CALLER           =
*   ES_EXIT_CAUSED_BY_USER            =
TABLES
    T_OUTTAB                          = IT_ZCP_DEMAND_SYS1
* EXCEPTIONS
*   PROGRAM_ERROR                     = 1
*   OTHERS                            = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I have made five buttons on my toolbar (add, delete, save, back, exit).
Kindly tell me how can I catch the sy-ucomm of these buttons.
NOTE: this FM is written inside an user-exit, so I cannot make forms.
Thanks in advance.

Dynamic ALV Grid is not displaying !!

Hi all,
I am trying to create dynamic alv grids and upto five levels(five grids) out put is displaying fine without any problem. But when I try to display the 6th grid, the program is going into infinite loop and getting timed out. Even I tried to increse the height of the grid even though it is not displaying.
Please correct me if any thing is wrong in below code.
*1st Level grid
IF <table1> IS ASSIGNED AND <table1> IS NOT INITIAL.
   CREATE OBJECT ob_split1
       EXPORTING
         parent      = ob_custom
         orientation = cl_gui_easy_splitter_container=>orientation_vertical.
    PERFORM set_split_height USING ob_split1 '20'.
    CREATE OBJECT ob_grid1
      EXPORTING
        i_parent = ob_split1->top_left_container.
ELSE.
    CREATE OBJECT ob_split1
       EXPORTING
         parent      = ob_custom
         orientation = cl_gui_easy_splitter_container=>orientation_vertical.
    PERFORM set_split_height USING ob_split1 '0'.
ENDIF.
*2nd Level grid
IF <table2> IS ASSIGNED AND <table2> IS NOT INITIAL.
   CREATE OBJECT ob_split2
       EXPORTING
         parent      = ob_split1->bottom_right_container
         orientation = cl_gui_easy_splitter_container=>orientation_vertical.
      PERFORM set_split_height USING ob_split2   '20'.
    CREATE OBJECT ob_grid2
      EXPORTING
        i_parent = ob_split2->top_left_container.
ELSE.
     CREATE OBJECT ob_split2
        EXPORTING
          parent      = ob_split1->bottom_right_container
          orientation = cl_gui_easy_splitter_container=>orientation_vertical.
     PERFORM set_split_height USING ob_split2    '0'.
ENDIF.
(Created 3rd,4th,5th same like above).
*6th Level grid
IF <table6> IS ASSIGNED AND <table6> IS NOT INITIAL.
CREATE OBJECT ob_split6
       EXPORTING
         parent      = ob_split5->bottom_right_container
         orientation = cl_gui_easy_splitter_container=>orientation_vertical.
     PERFORM set_split_height USING ob_split6 '20'.
     CREATE OBJECT ob_grid6
       EXPORTING
         i_parent = ob_split6->top_left_container.
ELSE.
     CREATE OBJECT ob_split6
       EXPORTING
         parent      = ob_split5->bottom_right_container
         orientation = cl_gui_easy_splitter_container=>orientation_vertical.
     PERFORM set_split_height USING ob_split6 '0'.
ENDIF.
Appreciated your reply. Please let me know for additional info.
Thanks,
Ranjith.
Edited by: Thomas Zloch on Dec 8, 2010 5:44 PM - please use code tags

Hi romanch,
defining the field catalog you must reference all currency fields to the respective currency key field (type CUKY).
<alv_fieldcat>-cfieldname         = 'HWAER'.
This is sample for alv output of a currency field. The alv structure has a field HWAER which carries the currency key, e.g. USD or so.
Obviously you do not provide a cutrrency key for your values. If they are initial (zero), ALV will not display them as 0,00 but leave the field empty if the reference too currency key is not established.
If you define a DDIC structure for the ALV output this refernce is enforced. You can pass the DDIC structure name to the ALV and don not have to create the field catalog manually.
Regards,
Clemens

Doubt in hiding columns in ALV list

Hi Experts ,
                      I am working on block ALV list . I need to hide certain columns in the list based on condition . For example : ALV structure has fields such MATNR    MEINS    MBRSH   MTART
For a particular material if ITAB-MEINS EQ C_SPACE . Then the column - MEINS should be hidden for particular material record.
Could anyone suggest me code for this logic .
Thanks ,
Kumaran.C

Hi Rajnesh ,
                       Thanks for that reply , But one doubt .
Should we have to loop the ITAB before creating the feildcatalog ?
say for ex :
loop at itab.
if itab-meins eq c_space.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-selfield_m = 'UOM'.
fieldcatalog-col_pos    = 3.
fieldcatalog-no_out     = 'MEINS'.
append fieldcatalog from fieldcatalog.
end if.
endloop.
is this the way to code the above logic , pls explain .
Thanks,
Kumaran.C

MENGE...ALV...STRUCTURE..BLANK

Similar Messages

Maybe you are looking for