Merging roles is not working in QA box

Hello folks,
I have Portal SP13, i merged 2 roles and it is working according to my requirement in the development box. but when i transport the same from Development box to QA box it is showing as a seperate role.
In dev box the role got merged and in QA its not getting merged.
I checked and compared the properties of worksets and roles in DEV and QA, both are same and we dont have any diffrence.
Please throw some suggestions to solve this.
Thanks & Regards
Kumar

@micheal,
You are right, only one user is able to see as per req. and other see as multiple options.
@Koti,
I have cleared the cache, logoff and login many times, still i am having the same prob.
Thanks & Regards
Kumar

Similar Messages

  • Another FPN Thread: Remote role assignment not working

    Hi all,
    We have successfully implemented FPN for use in our ESS and BW environment and we are experiencing very little problems with it. We now want to start implementing it for our eRecruitment and SRM systems (as producers). For some reason we are not able to use the Remote Role Assignement functionality.
    We have set up trust for the systems and use SSO.
    Connection test for the producer is successfull.
    We can see the Producer content in the pcd on the consumer.
    Server times are the same.
    As far as I know I have correctly set permissions on producer and consumer.
    Possible cause: We are in the process of upgrading our consumer Portal to NW 7.0 SPS15 and have encountered some problems. The system is partially upgraded, so some components are SP15 and some others are still SP13. This is currently under investigation by SAP. Can this be an issue as our producer portals all are still on SP13?
    I hope to hear from you soon. Please ask if you need any screenshots. Thanks in advance.
    Best regards,
    Jan Laros

    Hi Jan,
    if remote role assignment not works, you can also use remote delta links. I only work with remote delta links because i have more options   and a better performance.
    If your connection works you can go to Content Administration ->Portal Content-> NetWeaver-Content-Producer. Hier you can see your remote system. Now you can copy the role and add it to your portal-content.
    If you can not see the content make sure that you have the same user  on both sides also check the premissions on the portal-content of your remote system. To test the connection it is easier to add Everyone group to the content of your remote system.
    regards,
    Sharam

  • Card reader not working out the box scr 3500?

    cac card reader not working out of box scr3500 help

    Welcome to discussions Kevin!
    I'm sorry to hear that first of all make sure that there is nothing sick on the eye of the camera it self, after that how is the lighting on the room that the computer will be set up? did the green light came on when you're trying to use iSight? i'm asking because the same thing happen to me but it was nothing but bad lighting in my office. If this doen't help call apple asap they should replace your computer with out a problem. Hope this helps good luck!
    Miguel

  • Merge calls is not working in my iphone

    merge calls is not working in my i phone i checked it for 5 times not working help me i am new for this

    Hello naveen_199155,
    Welcome to the Apple Support Communities!
    I understand that you would like to merge calls together on your iPhone, but it is not working as expected. There are a couple of different resources I would suggest reading over in this situation. 
    First, depending on whether you have a GSM network iPhone or a CDMA network iPhone, the Conference calls feature may work differently. Please review the first attached article for this information. 
    iPhone: Understanding phone features - Apple Support
    Conference calls
    Supports up to five calls simultaneously
    Supports up to two calls simultaneously.
    CDMA networks may not be able to add, swap, or merge calls in certain situations. See the iPhone user guide for more details.
    Another valuable resource, just to ensure the correct steps are being taken to set up a conference call, is the iOS 8 User Guide (page 51). Please read over this for more information on the process as well as why the feature may not be working if you are using a CDMA iPhone. 
    manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    Have a great day,
    Joe

  • Row Level Security - Data filter - Roles Variable Not working in OBIEE 11.1.1.7.1

    Hi all,
    Previously, we were using OBIEE 11.1.1.5.0 and we were able to assign users to application roles by using the initialization block to assign the ROLES session variables.
    1. My USER_SECURITY table in Oracle database:
    USER_NAME | USER_ID | ROL
    user1       | 1723    | GobalDataRole
    user2       | 1739    | GobalDataRole
    user3      | 1743    | GobalDataRole
    2. The SQL query in my session initialization block:
    select USER_NAME, USER_ID, ROL
    from USER_SECURITY
    where USERNAME = ':USER'
    3. The row-wise initialization option is not checked.
    4. In the Oracle Enterprise Manager Fusion Middleware Control, we created new application role: GobalDataRole and sync with rpd.
    5. The GobalDataRole is used in the RPD to filter the data under permissions --> data filter. GobalDataRole only has access to Country A data.
    6. Result: under my account, also in rpd Manage --> Sessions, user variable details
    User_name , user_id & Rol variable is working fine as expected,
    When we log in as user1, we can see in My Account, user assigned to: BI Consumers; Authenticated Role; GobalDataRole
    When we log in as user2, we can see in My Account, user assigned to: BI Consumers; Authenticated Role; GobalDataRole
    When we log in as user3, we can see in My Account, user assigned to: BI Consumers; Authenticated Role; GobalDataRole
    User1, User2, and User3 are able to see the data correctly according the their data access setup.
    Now, we using OBIEE 11.1.1.7.1 and using the same method, but we not able to assign users to application roles by using the initialization block to assign the ROLES session variables anymore.
    Result:
    User_name & user_id variable is working fine as expected, but the ROl variaible is not capturing the DB value,
    When we log in as user1, we can see in My Account, user assigned to: BI Consumers; Authenticated Role
    When we log in as user2, we can see in My Account, user assigned to: BI Consumers; Authenticated Role
    When we log in as user3, we can see in My Account, user assigned to: BI Consumers; Authenticated Role
    User1, User2, and User3 can see all data (which is wrong) because they are not assigned to the correct application role that sets the data restriction/filter.
    Has anyone encountered the same issue? Any advice on how to solve this?
    Thanks in advance!
    Satheeshkumar P

    Thanks user10615659     ,
    - Yes the variable ROLES available in OBIEE 11.1.1.7.1
    - Tested the init block and variables in offline rpd its working as expected.
    - In online rpd, except ROLES and GROUP variable remaining variables working fine.
    - Verified log file in both online and offline init block testing - the init block execution is successful.
    Thanks

  • CUP Role Mappings Not Working

    We have configured role mappings in CUP such that when a main role is added to a request the associated roles will automatically be added to the request.  We noticed this functionality works when the main role is added upon initial request, however, when the main role is added during a subsequent stage (after the request is submitted), the associated roles are not getting added.  Has anyone encountered this issue or knows how to resolve?  Any input would be much appreciated.

    Hi,
    Role mapping configuration is only relevant at the time of request creation and not relevant if the role is added to by the approver.
    I hope this should resolve your confusion.
    Regards,
    Ankush
    SAP GR&C

  • Application Role does not work

    In EM, I add a new application role to an ADF web application.
    This application role named simple11_AR_superAdmin and it has a group member named simple11_G_superAdmin.
    This group is created in weblogic console and assign users.
    However, this setting does not work. This application can be login by all users (including weblogic).
    How to enable application roles? Does application role of EM equal to application role created in Jdeveloper?

    DO NOT UPDATE ON THE PHONE ITSELF! Never do this! You risk bricking your iPhone and seeing the Silver Apple Logo of Death due to incomplete downloads and/or crashing! This has happened to me on my old iPhone as well as thousands of others. Use iTunes and iTunes only to update Apps!

  • "merge duplicate contacts" - not working

    I have roughly 3600 contacts, many of which are duplicate names. I ran 'merge duplicate contacts' and Address Book came back and advised there were 1500 duplicates (which seemed high but, hey). I said, yes, 'merge' and it went off for two to three minutes and finished. There was no change in the number of contacts! All dups were still there.
    So I ran it again and Address Book found no duplicates, even though there are still as many as there were originally.
    Mystified.
    Dave

    Rocking wrote:
    PLease help me in resolving this problem
    Hi,
    I'm sure that people will be happy to help you if you would explain better your problem.
    You simply wrote "is not working". Don't you think it is a bit too generic?
    Do you get an Oracle error, data are not updated as expected?
    We don't know what your problem is. Sorry.
    Please follow Paul advice and check the FAQ which is explaining how to post a question.
    A well written question will definitely get a good answer.
    Regards.
    Alberto

  • On demand not working on 2 boxes

    on demand not working on 2 of my boxes 

    Hi karenz1951, I see that you called in regarding this issue, please let me know if you are still not able to use Video on Demand on your two boxes.
    Thank you

  • Azure Web role scaling not working when using Reserved IP

    Hi,
    I am using autoscaling feature for long time now on my web role deployment. I've recently create new deployment (with same web role bits) to use a reserved IP. Since that moment, the autoscaling is NOT working anymore. I can see many AutoscaleAction failures
    in the Management Portal Operation logs.
    When I try to update the role instance count using REST call (via Azure Management Studio of Cerebrata), I get the following error:
    Code: BadRequest
    Message: A reserved IP cannot be added, removed or changed during deployment update or upgrade.
    I cannot find anything about scaling and reserved IP on the net but I can't believe I am the only one in this situation ?!?!
    Thanks for your help
    Jean Bédard
    Regards, Jean

    Hi,
    Refer to the
    Publish Windows Azure Application Wizard on MSDN, specifically #7 in Configuration Your Settings.
    When ‘Deployment Update’ is checked, only the changes since your last deployment will be pushed out to update your services. This is not possible when changing the virtual network settings of the service. To enable full deployments, you have two options:
    Uncheck the ‘Deployment update’ checkbox
    Click ‘Settings’ on the ‘Deployment update’ item, and select ‘If deployment can’t be updated, do a full deployment’.

  • Business role customizing not working in crm 2007 web client

    Can someone tell me what services need to be activated via sicf for business role customizing to work in the Web Client under the Administration component in CRM 2007.  I have everything else working in this are eg surveys, document template, fact sheet configuration, view configuration but the business role customizing when selected just opens a blank screen
    Thanks in advance
    Eddie

    Hi Eddie,
    The SAP CRM 2007 Master guide suggests enabling all the SICF services in the SAP namespace.
    We had some script errors in CRM UI, but once all the SICF services were activated, they simply disappeared.
    The IDES demo systems are also set up this way, so you can try doing it.
    Regards,
    Padma

  • Paste as Smart Object from Ai to Ps not working. Boundary box is there but art is missing.

    Paste as shape layer works and so does paste as outline but Smart Object and pixels paste not working. I have the latest versions of each program.

    Could you please post screenshots to illustrate the issue?
    Are you sure the copied Path has Fill or Stroke?

  • Why will this not work for combo box

    I need to know why this will not work a combobox but it works for text fields. Isay ther is an error in the doc.createTextNode.
    Please any help would be great.
    Thanks
    // Repeats for each Element in the User Configuration.
    item = doc.createElement("COMPANY_NAME"); // Create element
    item.appendChild( doc.createTextNode(SetupCompanyNameJText.getText()) );
    UserConfig.appendChild( item ); // atach element to User Config element
    item = doc.createElement("INTIALS"); // Create element
    item.appendChild( doc.createTextNode(SetupIntialsjComboBox.getSelectedItem()) );
    UserConfig.appendChild( item ); // atach element to User Config element
    item = doc.createElement("FIRST_NAME"); // Create element
    item.appendChild( doc.createTextNode(SetupFirstNamejText.getText()) );
    UserConfig.appendChild( item );

    when I do that I end up with the following
    Error: #:300: class Configuration not found in class
    any ideas
    thanks

  • Audigy 4, digital out would not work, now external box does not power

    I recently purchased a audigy 4 sound card. At first it was almost as if there was a loose wire somewhere. Sometimes the external break out box would power up and sometimes it would not. There was no loose wire and it now no longer powers up at all. The only thing that was worse than the intermittent power up was the digital out on the box. First of all I was told that you could use the spidf out on the box to a receivers digital in, this never worked now matter what settings I tried. I was then told to try the mini out. So I went and bought a mono mini out, that was a joke, didn't fit right rarely worked. I then went and bought a mini stereo plug to RCA out, that fit right and worked a few times, It no longer works at all.
    I had the settings set up correctly with the spidif passthrough.
    Has anyone else had any problems getting the digital out to work with a receiver?
    The analog works fine, but just like the audigy mp3 the bass output for my sub is weak and almost nonexistent. I have a nice hifi/ht system I am trying to get this card to work with.

    hello there!
    i have the same problem - when i use the equalizer i can save a preset without problems,
    but if i reboot the pc i first have to open the equalizers window to make the equalizer work. without having opened the equalizer window it seems to be not activated.
    does anybody have an idea how to fix that problem?
    greetz,
    doolak

  • Call merging (conference calling) not working on iOS 8.1 & iPhone 6 (VZW)

    Hello Everyone. I've discovered a problem with call merging on my new Verizon iPhone 6 (iOS 8.1). When I add a caller and then hit the merge call button after the second caller answers, the screen says that the calls are now merged. However, the original caller is still on hold and cannot join the call. This problem seems to exist regardless of whether any of the callers in question have CallerID blocking or not. Also, when placing a call on hold to answer an incoming call, I have access to switch calls button, but not the merge calls button.
    Has anyone else experienced this glitch? Is there a solution or work-around?
    Thanks,
    Jamie

    I have the same problem with T-Mobile, but this must be an Apple thing!  Why do they feel the need to fix ring tones but screw up more important things like Bluetooth and Call Merging????  Seriously, their rein at the top won't last with this BS!

Maybe you are looking for