Message F5725 and MR11

We're using MR11 to clear the GR/IR account. We have a US PO that the user put a Canadian cost center on. When we try to post it in MR11, we get F5725.
Inconsistent currency information
Message no. F5725
Diagnosis
Company code '2000' has currency type '10'. This currency type has the currency key 'CAD' in the financial accounting application.
The same currency type is conveyed to financial accounting across the accounting interface with currency key 'USD'
The currency definitions are accurate and cannot be changed. The problem is with this PO and the posting. I can't change the Cost Center on the PO now. How do I fix this?

I believe that we're getting this error because of the way we have our currencies defined. However, changing currency configuration because of one error message for one PO is not the fix. I'm not going to change our config in OB22 or OX06 because of this single PO. Our currencies were defined over 4 years ago and now I have this one problem.
When the user entered the PO with the wrong Cost Center from a different company, he would have received this message.
2070061 belongs to a company code with a different local currency
Message no. KI189
Diagnosis
You made an account assignment to 2070061. This object is assigned to controlling area CA00 which in turn is assigned to company code 2000 with a different local currency. You can post only to objects belonging to this controlling area from company codes that have the same local currency as the object's company code. 2070061's company code has local currency CAD but the current company code's currency is USD.
System Response
You cannot post to 2070061 from the current company code.
Procedure
Check the object 2070061 and the company code it is assigned to. If the posting is in FI, you can change the company code in the posting row.
This warning message is a result of having our currencies defined the way we do, which is 30 (group) in OX06 and 10 (local) CAD in 2000 and 10 (local) USD in 1000, with each company having 30 as the second currency. If we had these defined differently I doubt we would have the issue we're having with this PO. However, changing the currencies is NOT an option.
Can someone tell me how to correct this PO or the Posting? In the message above it says that "you can change the company code in the posting row". What does this mean? In what transaction? Thanks

Similar Messages

Problem with internet. When i open System preferences, Network, message drops down: 'your network settings have been changed by another application'. I click OK, but it drops a message again and again, preventing me to do anything about the setting.

Problem with internet. When i open System preferences, Network, message drops down: 'your network settings have been changed by another application'. I click OK, but it dropps the message again and again, preventing me to do anything about the setting.

A Fix for "Your network preferences have been changed by another application" Error
In the Library/Preferences/SystemConfiguration/ folder delete the following:
com.apple.airport.preferences.plist
NetworkInterfaces.plist
preferences.plist
com.apple.nat.plist
You will have to re-configure all your network settings since deleting.
(10.4.10)
Use Software Update to update your OS to last version of Tiger. Install all the other updates that goes along w/it.

I am having trouble installing Itunes 11.1.1. I get an error message 2502 and 2503. Any help in this regard would be appreciated.

I am having troble installing Itunes 11.1.1. I get erro message 2502 and 2503. Any help?

Windows 7 32 bits
I had the same issue which is now solved. For your information, the following procedure was successful:
Check permissions within the Installer folder. To do this, follow these steps.
1. Click on Start and in the Start Search bar > type in > c: /windows/installer.
2. Right click on c: /windows/installer at the top under programs and click properties.
3. Click on the security tab > Verify if System and Administrator account has Full access permissions.
Note : I ran into problem with locating the C:\windows\installer directory. For some reason Windows Explorer wouldn't show it even though I don't have it hidden. I ended up using the ExplorerXP application to locate the directory. ExplorerXP is available at http://www.explorerxp.com/

Iphone 5 - I am trying to delete message threads and once I do, I go to text someone else and it won't send. HELP? I just don't want those messages on my phone anymore.

Iphone 5 - I am trying to delete message threads and once I do, I go to text someone else and it won't send. HELP? I just don't want those messages on my phone anymore. I have tried to restart my phone but when I do, the "deleted" threads show back up on my phone. I use iOS 7.1.

Hello Makayla,
It sounds like you're deleted message threads keep coming back after you restart the devie. I recommend starting by quitting all the running apps on your phone:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
If the issue persists, backup your device to iTunes and then restore it as a new device and verify that it works.
How to erase your iOS device and then set it up as a new device or restore it from backups
If it does, then restore your backup to either verify it still works and the software just needed reinstalled, or isolate the issue to the backup file itself.
Thank you for using Apple Support Communities.
Regards,
Sterling

HT201413 I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the sign that says this application has failed because MSVCR80.dll was not found.

I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the banner that says this application has failed because MSVCR80.dll was not found. anyone have a fix suggestion? thanks

Click here and follow the instructions.
(98724)

GR/IR Clearing When to perform F.13/F.19 and MR11

Dear,
Can you pls explain GR/IR Clearing and its grouping, whats the process for GR/IR
adjustments done?
What is Grouping and Regroping?
When to perform F.13/F.19 and MR11?
I have read the threads discussed here on this topic, still I do not understand.
Thanks All
Krishna

Hi
When we execute SAP124 (F.13) with the flag "only documents which can be cleared" it will display in detailed list only those documents that can be cleared.
If dont check this field it will generate a list even of documents that cannot be cleared.
In this case in OB74 you have given ASSIGNMENT and INVOICE REFERENCE as the criteria.
But what is probably happening is that the ASSIGNMENT is not matching in these documents and thus the system does not find
the item suitable or rather eligible for clearing.
If you check the documentation relative to the "Special processing of GR/IR clearing accounts" in SE38 -> SAPF124, you will find the following information:
"If you set the GR/IR accounts special processing indicator: The program then automatically uses the EBELN and EBELP fields as well a as the XREF3 reference field as grouping criteria.
This means that documents with the most recent posting date are initially ignored."
So the system is checking these three fields for grouping the documents.
For clearing GR/IR account it is not obligatory to set indicator GR/IR Account Special Processing. As described in note 546410 it can be more effective not use this indicator.
Also read note 546410 and 574482 thoroughly.

Write message to Job log with message class and message number

hi folk,
When running a background job I'm able to write a message to the job log using the statement - Message "some text..." type 'I'.
In the Job log I can see the message "some text.." with a "default" message class and message number (but in my report i don't specify any message ID) so I have no idea it comes from.
Then I try to send a message where I specify the message class/number etc...using message id 'Z1' number 000 with "some text..." In the job log I now can see the "right" message class "Z1" and the number 000, but the message is empty?
Please advice how to write a message with the message class and message number.
Best regards
LinhNg

Hi Linh,
How did you provide the text "Some message"? Did you hard code it or used a text element?
Regards,
Immanuel.

Push notifications from Messages App and other apps

Hello!
I've got my first Blackberry (Bold 9790), I have a problem: I don't know what I did before during set up etc. but now I have always doubles push notifications, for exemple, if I receive a message on Whatsapp I get a notification from Whatsapp App and from the Messages app, same for Facebook etc this is annoying me a lot, how can I restore Messages to show me notifications only for SMS and e-mails??? Or how can I get only one notification for all things happen and not receive notifications twice? thank you!!

UPDATEIn Whatsapp I unpluggged th eoption "show chat in the messages folder" and now when I get a new Whatsapp message, in the home screen I get the notification from the app (and not from Messages) but without the preview?!

I can't use firefox after upgrading to 4.0. I get the message I have to restart my computer for upgrading, but ik doesn't start. I get the message over and over

I can't open firefox after upgrading to 4.0
I get the message over and over again that i have to restart my computer for upgrading to firefox.
I tried new installation. But i got problems on all my accounts

Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
Starting The Computer In Safe Mode;
If running, turn your computer off.
Remove any disks and thumb drives that are in your hard drives or ports.
Now start your computer but also;
'''Windows; '''Press the <F8> key repeatedly.
'''Mac: '''Hold down the Shift key.
'''Linux; '''Using the command line, Linux/Unix computers can be booted
into various run levels that determine which resources are loaded.
For example, "runlevel 1" is typically the equivalent to Windows and
Mac safe modes.
* Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
When the '''Boot''' menu is displayed, release the key you were pressing.
You must now choose what mode to use. The most used are;
* Safe Mode; The computer runs with only a minimum set of programs.
* Safe Mode '''With '''Networking; Same as above, but with internet access.

TS4425 when trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

When trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's

How can i prevent mail from downloading the same messages over and over again?

is there any way to prevent Mail from downloading the same messages over and over again? Mail has a minimum of "50 recent messages" to download, but i hate having to delete them every time i check for new mail! why doesn't the program remember if you have already downloaded a message, and suppress any subsequent downloads???

Same issue since Mavericks.

TS3899 I can no longer send photos in an email from my iphone 5. It uploads the photo to the "new message" page - and then it freezes. I can use safari and check my emails, and when the email part is frozen the rest of the phone works fine ! any advice?!

I can no longer send photos in an email from my iphone 5. It uploads the photo the the "mew message" page and then it freezes! I can use safari and check my emails, and when the email part is frozen I can still use the rest of my phone. Any advice ?!?

Hi, ireland a.
I would recommend closing any open applications in multitasking and restarting the device. If unfamiliar with multitasking, I have included a screenshot on how to process an application close.
iOS: Force an app to close
Once these steps are processed, attempt to send the photo again.
iPhoto for iOS (iPhone): Send photos by email
http://support.apple.com/kb/PH3271
Regards,
Jason H.

Log message Taxonomy and indicated that no longer exist.

I have messages in my log EP, a taxonomy and an index that no longer exists, but it fills my message log and the message that comes out constantly
My SAP Portal is the 7.0 SPP 14

Hi,
Have a look at Note 1077677,it might be usefull.
http://help.sap.com/saphelp_nw04s/helpdata/EN/45/27f3f0ff07d54ebedca914853a97f7/frameset.htm
narsi

How do I enlarge the font in messages received and sent? I have it set at "13", but it is very, very small on my screen. I can't seem to change the appearance of the tool bar even when I try to "customize".

How do I enlarge the font in messages received and sent? I have the font set at "13", but the appearance on my screen is very, very small. When I try to "customize the toolbar" to look like the tool bar above this message, I am unable to do so. Please advise. Thank you.

Thanks MartinR, yes the Toggle bars can be adjusted so that I can see all the tracks - just in the smallest setting - however this also creates a huge area of grey which serves no other purpose than to "use up screen space". If this is deliberate then there is nothing one can do - since presumably the additional profit made on screen sales is more important to Apple, than the combined annoyance to those working on a 13" laptop. Of course a 15" screen or even 17" screen may make this wastage less obvious. Please indicate that this is all incorrect and explain why it is important to have space waiting "for additional tracks", even if I have no intention of making additional tracks. If that is the answer then perhaps additional space to the left and right of the timeline would be useful in case I wish to make a 30 minute film, so that it could be placed there without having to drag anything. It may be that I am expecting software than can be tailor adjusted, each parameter to the desired level as in professional items and since this is a cheap consumer program it is not possible.
I bought Final Cut Pro for a lot of money (when it first appeared it was thousands and not just hundreds) but never used it since it was too complicated and tedious, but maybe there, this problem of screen wastage does not occurr, perhaps someone can advise! I could go back and reinstall it, but it was made for 10.2.8 and not 10.6.8 so it would not run on this macbook. I recently bought an old 15" TitaniumPowerbook (from 2005) and despite running at 1MHz the response time on it is "instantaneous" - amazing to not have the almost half second delay on many commands - graphics appear nearly immediately (just 5 milliseconds delay) and this makes working so much more enjoyable, not having the (350ms) stutter of 10.6.8 which we all get used to after our initial disappointment.
Thanks for your help!

There's a not enough storage message appearing and I can't get rid of it.

There's a not enough storage message appearing and I can't get rid of it.

A reset may help: Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons and await restart.

Message F5725 and MR11

Similar Messages

Maybe you are looking for