Message: HP Deskjet All-in-one series. This software update requires that orig software be inst 1st.

Can anyone tell me how to delete this item?  Every time HP does an update, it pops up with this note...and I do NOT have an HP printer.

Hello,
Go to the control panel and make sure everything HP is removed from the list. Also, make sure under the start menu, you have nothing listed underneath that.
Please let me know if you see nothing, then I'll give you instructions on how to remove it from the registry.

Similar Messages

  • My brand new HP Deskjet 1510 all-in-one series Cant print

    This new HP 1510 All in one series that I just bought is not consistent in printing and most of the times it picks the paper and makes a bipping sound and then stops. It will then give a printing error report and spit out the paper with no print. This is driving me crazy. I have uninstalled and installed a couple of times but the problem persists. At times it prints and at times it doesn't. you can barely tell when it is going to print and most of the times it doesnt. I really need suggestions please

    Hello there @Drawingston , welcome to the forums
    I read your post about your Deskjet 1510 not printing consistently from your Windows 8.1 system, and when it prints, the pages are blank. I will surely try to help you!
    I would suggest that you try a few things, they are:
    Run the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. Please send me the results in a screen shot or write them in a response.
    Try a different USB cable that runs directly from the back of the printer, to the PC.
    Click this guide and try cleaning the paper rollers: The Printer Does Not Pick Up or Feed Paper
    Reset the printer and make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors.
    Try printing again from more than one program.
    Let me know all of the results
    Good luck!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How do I scan on my HP deskjet 1510 all in one series? Theres' no button on the printer?

    there's no scan button on my hp deskjet 1510 all in one series printer? how do I scan?

    Hello,
    If you go to the following location and identify what PC operating system you are using, it provides instructions on how to scan to your computer:
    http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=26675&tmp_task=useCategory&cc=us&dlc...
    I work for HP, However, I am speaking for myself and not for HP

  • Is it possible to connect HP DESKJET 1510 All-in-One series Wireless printer without USB cable?

    my mom recently bought me the HP DESKJET 1510 All-in-One series so i have an at home printer for school work. but when we bought it we did not know there was a certain USB that had to connect to the printer. so we bought the wrong one. now i have a project due and i cannot print. we have a small USB that fits it but its hard to connect it to the computer and printer because its so small. so if we can have it sent to the printer without the USB that would be perfect!

    Hi,
    No, in many cases printers won't come with USB cables. You need a cable which is similar to the following one:
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I NEED A FREE DOWNLOAD FOR MY PRINTER/DESKJET F300 ALL IN-ONE-SERIES/HP

    I NEED A FREE DOWNLOAD FOR MY HP DESKJET F300 ALL-IN- ONE SERIES,OR ANY 325 SERIES.

    Hi,
    You will definitely get FREE from the following link:
       http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?cc=mx&taskId=135&prodSeriesId=11293...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP 3540 e-all-in-one series. Missed a step during setup. Please help!

    Hi,
    I've just set up my HP 3540 e-all-in-one series, however I think I've missed a crucial step and I'm worried I've messed everything up. I printed the alignment page and on it, it says to scan the alignment page for best print quality. I somehow bypassed this step and I'm at a loss as to what to do now. Will it affect the printer or quality in any way?
    Please help!!

    Hello there! Welcome to the forums @panda411 
    If there are any "alignment" issues you're noticing when you use your Deskjet Ink Advantage 3540, you can run the alignment manually to see if that corrects the issue.
    If there is no issue, I wouldn't suggest doing anything differently. What comes to mind is the saying "if it's not broken, don't fix it"!
    If you feel you need to align the printer, try this:
    source
    If there is anything else I can help with, just let me know!
    Best wishes
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Windows 8.1 with my f 300,all in one series

    I am unable to use my F300 all in one series with my windows 8.1 laptop.please help

    Hello hemalsheth80,
    Please let me take a moment to say "Welcome" to the HP Forums.
                                      I hope you enjoy your experience!
    I see that you are having some issues when attempting to connect your printer to your Windows 8.1 computer.
    Please respond with your exact printers Model Number.  As you can see, HP has a number of models that fit the description that you have already provided.
    HP Deskjet F325 All-in-One Printer
    HP Deskjet F335 All-in-One Printer
    HP Deskjet F340 All-in-One Printer
    HP Deskjet F370 All-in-One Printer
    HP Deskjet F375 All-in-One Printer
    HP Deskjet F380 All-in-One Printer
    How Do I Find My Model Number?
    I look forward to hearing from you.
    Thanks for your time.
    Cheers,   
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP Deskjet all-in-one F4440 will not print

    My HP Deskjet all-in-one- F4440 will not print.  I have put in a new color and a new black cartridge.  It clanks loudly when it moves back and forth.  Finally it stops and then pulls plain paper through as though printing on it - does this two or three times.  then it pulls plain paper halfway through and stops.  I have to tug and carefully pull halfway paper back out towards front to remove.

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? Are there any error messages or flashing lights? What operating system are you using?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • How do I install driver for hp psc 2400 all in one series AND safe wsnmp32.dl​l Without a Disk?

    How do I install driver(s) for hp psc 2400 all in one series ( WIndows 7 laptop)   AND a safe version of wsnmp32.dll -- Without a Disk?    A tech took the driver off my laptop and I now have no printer/scanner.  Help!!
    Much thanks!

    Hello,
    I see that you're having an issue installing the software. I would suggest following this document, which will guide you through several steps on how to resolve the issue.

  • Blue screen error c824C1500 on HP Photosmart All-in-one series C5580

    A blue screen error c824C1500 appears on my HP Photosmart All-in-one series C5580's display when I turn it on. I have gone through the basic troubleshooting solution and it give me the same error message when I plug the power cord back in. Any other solutions? Thank you.

    You probably need a new printhead or pump.  Either is financially prohibitive vs. a new printer.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I have a hp C410 all-in-one series printer.  When I updated to 10.8.1 it was no longer supported.  HP told me to go to the Apple system updates and download an installation program.  I can't find that program in my Apple updates file.

    I have a hp C410 all-in-one series printer.  When I updated to 10.8.1 it was no longer supported.  HP told me to go to the Apple system updates and download an installation program update.  I can't find that program in my Apple updates file.  Please help.

    From the HP Support site, this may help:)
    "Re: Problem with latest HP software update for Mountain Lion and HP Photosmart Premier C410.
    Options 
    08-10-2012 10:54 AM
    Download and install this: http://support.apple.com/kb/DL907
    Reset the printing system:
    - Go to System Preferences > Print & Scan
    - Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it."
    Hope this helps

  • Installing new HP Officejet Pro 6830 e-All-in-One series

    We just installed the HP Officejet Pro 6830 e-All-in-One Series.  The screen on the printer does nothing but spin around with the notation that it is "Checking for printer updates".   Why is this happening?  Like I said, we just set it up and I am turning to this form because I can't find a Support contact phone number.  I've turned the printer off and then back on. We've installed, uninstalled, and re-installed.  About ready to pack it up and just use our old All-in-One again. Thank you!

    Hi @kukki,
    Welcome to the HP Forums!
    I see that you need help with installing and setup your HP Officejet pro 6830 on Windows 7. I am happy to help you with these issues!
    In the meantime, please see these guides:
    Setting up the Printer Hardware for the HP Officejet 6810 and Officejet Pro 6830 e-All-in-One Printe....
    Download and Install Your Windows HP Printer Driver and Software for a USB Cable Connection.
    Setting Up the Printer for a Wireless or Wired Network for the HP Officejet 6810 and Officejet Pro 6....
    You can choose which you want depending on the type of connection you are using.
    Hope this resolves your issues, and have a great day!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • DeskJet All in One printer cartridge compatibility

    Hi there. I hope you can help me. So my dad gave me this wonderful printer, the DeskJet 2544 all in one. Unfortunately, the tri. Color cartridge ran out. I was about to shop online on the HP website but there was no 301 tri color CH562E like the one installed on mine. I was thinking if I can buy other cartridges that can be an alternative? For example, the deskjet 2540 all in one uses HP 61 cartridge. Can I order and use that?<br><br>Also, what is the difference of a deskjet all in one printer and a DESKJET INK ADVANTAGE all in one printer? Can I use cartridges from that?<br><br>Thank you. Looking forward for someone to help.

    Was the printer purchased on one country but you are in another?  If so you will need to Contact HP to request a "Regionalization Reset". There should not be any charge for this, it is covered as part of the cartridge warranty. You will need to have access to your computer and printer while on the line with HP. You will also need to have a set of cartridges for the new region, once the reset is complete cartridges from the original region will no longer work.  HP's web page on the subject is here.
    You can find the correct cartridges for your area from the HP SureSupply site.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Hp 1512 all in one series printer

    i have a hp 1512 all in one series printer the software that came with it says hp 1510 all in one series printer is this the right software

    Hi blanche2,
    I understand you are inquiring if you have the proper software CD for your printer. Yes you do. A printer much like a car has a series that contains a base model and a few others. By adding different features and options to the base model it will create a different model number under that original series. The base driver will be the same for all the printers, but each model will have certain extras. Also different store chains will be assigned a different model number in that series depending on the promotions that are offered at that particular chain.
    I hope this helps, let me know.
    Thank you,
    I worked on behalf of HP.

  • Connecting HP C4100 all in one series printer

    I purchase two mac notebooks for my kids and I am having trouble getting the printer to work. I installed the proper disk driver for Mac computers still nothing. What prints out is this: %!PS-Adobe-3.0
    %RBINumCopies:1
    %%Pages: (atend)
    %APLDSCEncoding:UTF8
    %%Title:
    I should have bought PC's for the kids. I Hate the apple notebook format
    Can someone help me. I do not like apple's customer service either.
    thank you
    Don
    email me @ [email protected]

    Welcome To Discussions ds4b!
    Did you download & install a Mac OS X driver from Product search results for HP C4100 All-in-One Series?
    ali b

Maybe you are looking for

  • Leopard Crashed and now won't boot

    Hi there, I was surfing the net earlier with my black macbook, with leopard updated to the most recent updates. But as I was on Safari opening up another webpage, the spinning beach ball bigins (just like a normal safari crash, or like an overload),

  • Transformation XML - abap

    dear abap experts, i currently want to read an xml file and convert it to an internal table in abap program. in sap help, i find TRANSFORMATION, but the example there is convert from data in abap to xml format. i have tried to convert from xml file t

  • RFC Adaptive Model Questions

    Hi all, I have some questions about RFC Adaptive Model in Web Dynpro: 1)Can I add a new RFC into a Model without recreating that? 2)There’s a way to WebDynpro don’t lost de mapped attributes like an input field that’s mapped to an import parameter of

  • Publishing user profile service application in SharePoint 2010

    Hi,  Can I have a link specific to publishing the user profile service application in a step by step manner in SharePoint 2010. This is quite urgent.

  • Clipping Path needed!

    I have been sent a psd file of a bottle (with a transparent background) that has already been deep etched. I need to create a clipping path so I can then save it as an eps to place in Indesign and send off to printer as a pdf. Currently the pdf when