Message in ML83 for SES

Hi everyone! I am working in ERP 4.6B and I have the following problem: I create a SES by transaction code ML81N, when I save the document the message is not appearing in the messages screen independing on that the configuration is complete on transaction MN13 and M/75. But if I go out the transaction ML81N and I go into the same transaction again, or I modify this SES, the message type appears.
What can I do? Message type must be created at the same moment that the document is saved.
In transaction M/75 on Defaults values tab page, in Dispacth time I have Send inmediately.
Thanks in advance
Rose

Hi Rosa,
One last check which is something I mentioned earlier is to review what your vendor schema looks like on your PO. Are you adopting a VN on your partners tab on the header of the PO?
Your condition record maintenance seems fine. This is probably the last thing I would check.
Hope this helps.

Similar Messages

Message settings option for text messages is not c...

I am using N73 phone and here i cant go to the message settings option for text messages. actually i want to change my message center.
Message > Options > Settings > Text Message
When i tried to follow above steps it finally ends up with the Main menu. But previously it works fine. I want to know there whether there is another way to set it or i need to go for a phone software installation.
Thanks.

The settings can also the sent directly to your phone as an auto install sms from your network. Contact your network and request they send you the sms.

Cancel a SD invoice error message "no authorization for transaction FB08"

Hi Gurus,
I am trying to cancel a SD invoice and am receiving the error message " no authorization for transaction FB08" is coming. Never has this happened in past, i have checked all the security authorizations also and they are in place. Accounting document status is showing as not cleared. Also, as per my understanding cancellation of invoice happens through VF11 which does not calls FB08. Please point out reasons as to why this could be happening and the possible solution thereof.
regards
Anmol Pareek

Hi Anmol
Once you got the error screen, immediately after that goto T code SU53 and expand all link. Take the screen shot and send it to your BASIS team to provide you proper access.
Yes you are correct cancellation is done through VF11 but sometime some programs internally calls other T codes.
take help of your basis team.

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again, time after time? (Windows 7 64bit US).

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again , time after time? (Windows 7 64bit US).
I guess this may be a feature request. Adobe may think this is a good message for every new eBook.
I sure would like to decide about that myself.
Thanks in advance if this will be changed.

singmk wrote:
Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
Would like to hope there is some way to have control over this. Can someone help?
Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
Hope this can help you.
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?

Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?

Thanks Linc I will sit tight for a while to see what happens before chasing up customer service. Cheers.

Error message -L3199-Total for assigned quantities exceeds quantity to be removed

Hi,
We are facing problem in picking at last HU in WM while creating transfer order for delivery document in PRD. We reproduced same issue in QXS.
Sales order was created with 40 Drums and also delivery with 40 Drums. Conversion factor mantained in material master is 441 DR = 30000KG, Base unit of measure is KG. While creating TO , we need to insert 5HU(each HU = 8DR) i different line items in TO . Tilll 4th HU is inserted i.e 32 DR(total) there is no issue. But as soon as we enter 5th HU below error is throwing.
Error Message - L3199-Total for assigned quantities exceeds quantity to be removed
In some cases delivery qty is showing more than picked qty (in other deliveries) and hence unable to create or confirm Transfer order.
Appreciate your comments on above issue /resolution or any OSS note/user exits/BADI exists ?
Regards,
Srinivas M

there is a huge amount of decimal dust
1 drum has a weight of 68.02721088435374
calculating the weight of 40 drums (quantity to be removed) in one single calculation rounds different to 5 * 8 drums where you actually have 5 individual calculations with a rounding that is then added to one result (assigned quantity).
Have a look into this KBA, as it explains different reactions based on the screens that are used.
However, I think you will not get lucky by this workaround as the you still have inaccurate quantities for the remaining drums
1926014 - LT03 - Overpicking allowed / not allowed during TO creation in foreground

I am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me

Dear ALL,
i am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me solutions.
var myBookFileName ,myBookFileName_temp;
                if ( myFolder != null )
                        var myFiles = [];
                        var myAllFilesList = myFolder.getFiles("*.indd");
                        for (var f = 0; f < myAllFilesList.length; f++)
                                    var myFile = myAllFilesList[f];
                                    myFiles.push(myFile);
                        if ( myFiles.length > 0 )
                                    myBookFileName = myFolder + "/"+ myFolder.name + ".indb";
                                    myBookFileName_temp=myFolder.name ;
                                    myBookFile = new File( myBookFileName );
                                    myBook = app.books.add( myBookFile );
                                   myBook.automaticPagination = false;
                                    for ( i=0; i < myFiles.length; i++ )
                                               myBook.bookContents.add( myFiles[i] );
                                    var pdfFile =File(File(myFolder).fsName + "\\"+myBookFileName_temp+"_WEB.pdf");
                                    var bookComps = myBook.bookContents;
                                    if (bookComps.length === 1)
                                                   bookComps = [bookComps];
                                     var myPDFExportPreset = app.pdfExportPresets.item("AER6");
                                    app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFEx portPreset,bookComps);
                                  //myBook.exportFile (ExportFormat.pdfType, pdfFile, false);
                                  //myBook.exportFile(pdfFile, false, pdfPref, bookComps);
                                    myBook.close(SaveOptions.yes);

Change the below line:
app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset,bookComps);
to
app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset);
Vandy

What happened when i now click a photo in a particular album i get the message "the volume for img_4006 cannot be found" what do i do

when i click on a photo in a particular album---i get the message "the volume for img_4006.jpg cannot be found. it used to open just fine. all other photos in different albums open up. what happened and i can i fix this?
thanks

Are you running a Managed or a Referenced Library?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

Error Message::: The volume for "CIMG0010.JPG" cannot be found.

When I import to iphoto, I get this message:
The volume for “CIMG0010.JPG” cannot be found.
Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again.
I have to press Cancel each time to resume importing.
Anyone have same problem?
Thx for your help.
Happy Holidays!
Ms. MiniMac

I too had this problem but found a very simple solution*. No rebuild needed.
For anyone else who runs into this problem here is what happened to me, and what I did about it (for reference):
I checked to make sure all software was updated, I tried different memory cards, I tried reformatting cards and used a card reader and tried straight from my camera (Canon 40D). I was downloading over 250 photos and after sitting there hitting 'Cancel' on each photo TWICE my photos finally loaded... or so I thought. When I went to open them, only the thumbnails were there! Argh!
Thankfully I didn't delete the memory card, and this time I tried downloading to a new folder on the Desktop and then importing to iPhoto. I got the same error. I tried locating each photo with the 'Find Photo' button and this opened the correct folder and after I scrolled down it had even highlighted the correct file. Unfortunately this did not work.
I tried a photo at the beginning, middle and end of the shoot to see if the memory card was somehow corrupt. Same problem with each. Eventually I did load my photos but again, only after I hit cancel for each one of the 250 photos. Interesting that after I hit 'cancel' it would download the photo.
The 'duplicate image' window came up for the 3 images I had randomly selected earlier, so I didn't think it could have been a naming problem. After all, I have been using the same camera for a while with sequential numbering enabled.
After reading Terence's reply (thank you) I was even more flustered that I would have to rebuild a database that I thought I was careful creating and backing up. Backing up... That was it!
I have over 40 gigs of photos on a USB drive from before I owned my Mac. I choose to use iPhoto to catalog the files but did not want to load them all on to my laptop and clog up useful memory.
It occurred to me that as Terence had suggested iPhoto may be trying to double check the new images against old ones, but the old ones can't be found. Even though the files were on completely different drives.
After simply plugging in my USB drive the photos downloaded to my MacBook immediately. Just to be clear, the photos were not using the same names as old ones nor were they being written to the USB drive; but iPhoto needed to have that USB drive plugged in to download photos to the laptop hard drive.
This is an easy fix, and avoids database rebuilding, but I am worried about when I go traveling etc. and need to download photos without my USB drive handy...

Mac OS X 10.7 drivers for HP LaserJet 1300: installation at the "Add Printer" process ended, every time, with message "Currently drivers for this printer are UNavailable..."! PLEASE HELP?

APPLE [see Apple Support's Article HT 3669] says Mac OS X 10.7 (Lion) has drivers for this Printer.
But, every time I've tried installing it to my Mac Book Pro (which came with OS X 10.7), it does recognize that the Printer (connected via USB cable) is HP LaserJet 1300 -- in fact, right below, this statement appears: "The drivers for this Printer are available...". But, when it comes to the actual process of downloading, the "Add Printer" window -- after 20+ minutes of its "searching" for the drivers -- always ends with the message: "Currently drivers for this printer are UNavailable... contact the manufacturer."!!! (Can you imagine? Apple says it's available... but its own "Add Printer" process says it's UNavailable!)
I went to HP's support site, and it, too, says that drivers for this Printer are available! -- see the 2 links:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&lc=en&cc=us&dlc=en &product=4152639
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02915680&tmp_track_link=ot_ faqs/top_issues/en_us/c02915680/loc:4&cc=us&dlc=en&lc=en&product=4152639#N507
Can somebody help me? Would very much appreciate it.

You haven't installed any of the Photoshop updates for CS5.
Go download and install the updates.

"Message Rejection Handler" for the file/ftp adapter using fault policy

Hi guys,
We are trying to implement "Message Rejection Handler" for the file/ftp adapter using following fault policy configuration.
Fault Policy:
`````````````
<?xml version='1.0' encoding='UTF-8'?>
<faultPolicies xmlns="http://schemas.oracle.com/bpel/faultpolicy">
<faultPolicy version="2.0.1" id="ProcessNameGenericPolicy"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Conditions>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:remoteFault">
<condition>
<action ref="ora-retry"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:bindingFault">
<condition>
<action ref="ora-rethrow-fault"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id="ora-retry">
<retry>
<retryCount>3</retryCount>
<retryInterval>1</retryInterval>
<retryFailureAction ref="ora-rethrow-fault"/>
</retry>
</Action>
<Action id="ora-rethrow-fault">
<rethrowFault/>
</Action>
<Action id="ora-human-intervention">
<humanIntervention/>
</Action>
<Action id="ora-terminate">
<abort/>
</Action>
</Actions>
</faultPolicy>
<faultPolicy version="2.0.1" id="ProcessNameHumanInterventionPolicy"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Conditions>
<faultName xmlns:medns="http://schemas.oracle.com/mediator/faults"
name="medns:mediatorFault">
<condition>
<test>contains($fault.mediatorErrorCode, "TYPE_TRANSIENT")</test>
<action ref="ora-retry-with-intervention"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:remoteFault">
<condition>
<action ref="ora-retry-with-intervention"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:bindingFault">
<condition>
<action ref="ora-rethrow-fault"/>

</condition>
</faultName>
</Conditions>
<Actions>
<Action id="ora-retry-with-intervention">
<retry>
<retryCount>3</retryCount>
<retryInterval>1</retryInterval>
<retryFailureAction ref="ora-human-intervention"/>
</retry>
</Action>
<Action id="ora-retry">
<retry>
<retryCount>3</retryCount>
<retryInterval>1</retryInterval>
<retryFailureAction ref="ora-rethrow-fault"/>
</retry>
</Action>
<Action id="ora-rethrow-fault">
<rethrowFault/>
</Action>
<Action id="ora-human-intervention">
<humanIntervention/>
</Action>
<Action id="ora-terminate">
<abort/>
</Action>
</Actions>
</faultPolicy>
<faultPolicy version="2.0.1" id="RejectedMessages">
<Conditions> 
<faultName xmlns:rjm="http://schemas.oracle.com/sca/rejectedmessages" name="rjm:PartnerLinkName">

<condition>
<action ref="writeToFile"/> 
</condition>
</faultName>
</Conditions>
<Actions> 
<Action id="writeToFile">
<fileAction>
<location>Server/Loc/path</location>
<fileName>Rejected_AJBFile_%ID%_%TIMESTAMP%.xml</fileName>
</fileAction>
</Action>
</Actions>
</faultPolicy>
</faultPolicies>
Fault Binding:
``````````````
<?xml version='1.0' encoding='UTF-8'?>
<faultPolicyBindings version="2.0.1"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<composite faultPolicy="ProcessNameGenericPolicy"/>
<service faultPolicy="RejectedMessages">
<name>PartnerLinkName</name>
</service>
<reference faultPolicy="RejectedMessages">
<name>PartnerLinkName</name>
</reference>
</faultPolicyBindings>
We have SyncFileRead partner link.
The expectation is: when the message read by SyncFileRead partner link is rejected,
that rejected message should come to particular directory in the server.
Could you please help us fixing this.
TIA.

HI..
Have a look at this blog :
3) Error: HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
Description: The request requires user authentication
Possible Tips:
u2022 Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
u2022 If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
u2022 If the error is in Adapter Engine
u2013then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
u2022 May be wrong password for user XIISUSER
u2022 May be wrong password for user XIAFUSER
u2013 for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message
Http* Errors in XI
Thanks,
Pooja

I am running CS6 on a 2014 21" IMac version 10.9.5. I have an earlier version of Illustrator on CS4. When launching the CS$ Illustrator the message says "License for this product has stopped working". What can I do to get this to work?

I am running CS6 on a 2014 21" IMac version 10.9.5. I have an earlier version of Illustrator on CS4. When launching the CS4 Illustrator the message says "License for this product has stopped working". What can I do to get this to work?

Mylenium,
Before downloading CS4 again, how do I uninstall the versions that are currently on my Mac?
Many thanks for your help!

MESSAGE TYPE DEFAULT FOR PURCHASE ORDER

Dear All,
I want to set default message type ZNEU for all purchase order. I try this with T-CODE MN04 AND MN05 but it is not working.
SO HOW I MAKE MESSAGE TYPE DEFAULT FOR PURCHASE ORDER
Regards,
Pankaj

Hi,
Miantain the all the conditions records in t.code : MN04. after that check for the "Define Partner Roles for Purchase Orde" what did you mentioned for new or change as per that,
Check you had fine tune the output (message) type in following path:
SPROMMPurchasingMessageOutput controlMessage tyoesDefine message type for Purchase Order--Fine-Tuned Control: Purchase Order
Select the check box coresponding to your output(message) type ZNEU to have print output for this message type .......
Now try creating PO & u will have default message type ZNEU......
Hope this will help you.......
BR,
Patil

Output message not generated for Purchase order

We maintain MN04 message condition record for 2 key combination for output type NEU:
1. Purchasing Output determination : Document type -> NB, medium 1 print out
2. Purchasing Output determination : Document type/Pur Org/Vendor -> NB, 1000, vendor 20001, medium 5 External email
When I create PO for other vendor (not 20001), the system is nicely generating the output of the PO for printout.
Next we have maintain a condition record in MN04 for a particular vendor 20001, Doc type and Porg with setting 5, 4, EN so that we can send the PO via email to the vendor 20001, the system is not generating a message output of the purchase order when i check it before saving.
Please help me with this situation. we need setup the email PO functionality.

I created another message type ZNEU copy from NEU, include it in the message schema, created condition record with MN04/MN05 for both NEU for printout and ZNEU for medium 5 email. done all steps mentioned in the links.
When create a PO still only 1 message record NEU is defualted for printout only.
The message record for email ZNEU is not defaulted in PO?? Anything elase need to be done.

How do you fix error message "data rate for this file is too high for DVD. You must replace this file with one of a lower data rate".

When trying to burn a DVD it will go through the encoding step and at 98% we see the message 'data rate for this file is too high for DVD. You must replace this file with one of a lower data rate". We need help to correct this so we can complete burning to DVD.

What did you export from Premiere?
Did you use the MPEG2-DVD preset... and did you make any changes to the preset?
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

Message in ML83 for SES

Similar Messages

Maybe you are looking for