Message interface not listed in integration directory

hi,
i have created 2 interfaces inside my message interface........
both are outbound.....!!
i am actually doing 2 scenario's inside the same name space......
when i go to integration directory i am no able to get one of the message interface's while creating the receiver determination and all those things.........?

if ur using business service then just
add outbound interface in receiver side and
inbound interface in sender side.
or if u r using business system then the problem is in ur SLD.
just check ur business system over their.
thanks
reward point if helpful .

Similar Messages

Interface Mapping Not Found in Integration Directory

Hey guys!
I'am getting this error in the test configuration part of the integration directory:
"Interface Mapping: <Not Found> com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping"
I don't see why I should be getting this error since I have properly defined a message and interface mapping for the receiving interface.
BTW, I get this error when I use XSLT mapping. If I point my interface mapping to a normal message mapping, I get no error. Is there anything I am missing?
Regards,
Glenn

The weird thing is that when I test the the configuration in the Integration Directory, it is still looking for my old message mapping (the one i created using xi editor) even though I already replaced the referenced message mapping in the interface mapping to the XSL one.
Yes, I tested the interface mapping with the same data using the XSL mapping and there's no problem.
When I send the message though, I get an error saying "NO_RECEIVER_CASE_ASYNC" I really don't see why it should not recognize the receiver. I tried refreshing the cache but it still looks for my old mapping program...
:P

Message interface not exist in any software components on business system

Hi Experts,
In development-environment we have an interface (SAP->XI->3rd party system) with a conditional receiver determination (based upon a fieldvalue in RFC that comes from SAP, "CONTROL_RECEIPE_DOWNLOAD"). This functions properly in development.
After transport to production environment this structure is not known when I try to use it in the Integration Directory when creating a conditional receiver determination. Double-click on the interface does result in the startup of the integration builder, but the interface itself can not be found. The following error-message appears:
"Error message Message interface does not exist in any software components installed on this business system"
All design-objects have been put into production and in Integration Builder the structure is available. In IR it is not...
In development In the business system of the sending SAP system, I can see the interface. In production, I don't see any interfaces at the business system....so this might be the problem but how can I add an interface manually to a business system?
Can anybody please help?
Thanks in advance
William

Hi William,
One more thing. In Production, check the technical system of source. SWCV in which you have developed your interface, should be installed on the source system. If this SWCV is not in list of your installed products & SWCV then add it. Update the business sytem in ID again & it will work. I guess you have done a typo by saying that objects are not available in IR but in Integration builder its avaliable.
Regards
Sushil

Business systems defined in SLD not visible in Integration Directory.

Hi,
After having finished with the SLD configuration involving defining the product, software component, TS and BS. Then I imported in the Integration Repository from SLD and then defined message interfaces, types etc. After that, in Integration Directory when I am trying to assign new business system (to expose business system of sld as service), it is not showing me the newly defined business systems of SLD in the Integration directory.
Please suggest me a possible solution for this.
Thanks,
noor

Hi,
It happens sometimes due to Meta Data Issue,
Go for SLD Cache :
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Still If you are not able to see the Business System when trying to import the business system. Go to Objects tab in ID --> Business System and you will find the imported Business System --> Right Click and ADD to Scenario.
Regards
Agasthuri Doss

New objects not appearing in Integration Directory

Created two new Message Interfaces and they aren't appearing in the Integration Directory when I create my Interface Determination. I copied an Interface that was appearing and the copy isn't showing either.
I've checked the change lists in both systems and nothing is left to activate. I just wanted some suggestions as to what else I should check.
Many thanks in advance.

Thanks I performed a cache refresh using SXI_CACHE and there aren't any changes are waiting to be activated.
With regards to the selection you can't delete the 'query' and select all. The select interface dialog just has a list of the interfaces available and an OK or CANCEL box.
What is also interesting is that two interfaces that were deleted earlier today are showing in the list.

Business system is not displaying in Integration Directory

Hi Friends,
i'm doing RFC to RFC scenario.. here.. upto IR(Integration Repository ) i did every thing fine.. but in ID(Integration Directory ) for assiging business systems i did't get one business systesm. in SLD part every thing i'm getting.. but here for adding the system into my scenario only i'm not getting particular one business system in OBJECTS list...
is it any authorisation problem... because for other users it was getting .. plz suggest me the solution.. for getting
thanks
Babu

Hi Babu,
Once the business system is imported from sld then you can assign that business system in any number of scenarios. You are telling tat other users are using it and if so then it should be listed in the object list..check if any one might have deleted the business system instead of removing from their scenario...and if so...you can see the business system in the imported objects from sld.
Thanks,
Prasanthi.

Message Interface not found during Receiver determination

Hi Folks,
While doing Receiver determination i found this error
Problem Loading Schema Description: Message interface does not exist in any software components installed on this business system
i checked it in SLD also for Product assigned to Particular Business System. Even i tried with creating a new one and assigning the product and software component to it.
When i imported the Business system from SLD, i m not able to see any inbound and outbound interface for particular business system.
But it is working for another scenario where inbound interfaces are used.
plz help me out
Sachin

Sachin,
><i>DEV and QA is having diff. SLD so i created the SWC and products in SLD again.</i>
You should export the SWCV from your Old SLD and import in into your new SLD.
and then import the same in Integration Respository.
When you try to export SWCV from SLD, you will get a .CIM file which you need to save in your local desktop and then import this in the new environment.
More in this article,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Regards
Bhavesh

Cisco Messaging Interface-Not Running

Hi All,
On the UCM 6.0 the Cisco Messaging Interface service is activated and when i check the status in 'control center feature services' it shows 'Not Running' and 'Activated'. If i start and refresh the page it again shows as 'Not Running'

Hi Vineet,
This interface is only used in CCM to Legacy VM integrations (via SMDI) if you are not setup that way this is why you are seeing this :)
Cisco Messaging Interface Service
The Cisco Messaging Interface allows you to connect a simplified message desk interface (SMDI)-compliant external **Third Party** voice-mail system with the Cisco CallManager. The CMI service provides the communication between the voice-mail system and Cisco CallManager. The SMDI defines a way for a phone system to provide a voice-mail system with the information needed to intelligently process incoming calls.
Genrally the Cisco Messaging Interface (CMI) is a Cisco CallManager service that should be run only on the publisher server. This service intercepts calls destined for voicemail and generates appropriate SMDI messages, which are then delivered to one of the server's Component Object Model (COM) ports.
From this doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a008037e2f3.html#wp1024396
Hope this helps!
Rob

Service interface not listed in business system in ID.

Hi Experts,
In my QA system service interfaces are not listed in business system in ID, i have added product and SWCV in SLD and i am still unable to see the service interfaces of SWCV that i have added. i have done SLD and CPA cache refresh, restarted the QA system but still unable to resolve the issue.
Please suggest how to resolve this issue.

Hi Venu,
i have done SLD and CPA cache refresh, restarted the QA system but still unable to resolve the issue.
Try if "Compare from SLD" works? This can be accessed by going to ID -> double-click business system -> communication component -> adapter specific identifiers
Regards,
Mark

Adapter engine not found in Integration Directory

Hello All,
We are having a new server installation. The problem I am having is in Integratin Directory --> Communication Channel, no option for Adapter Engine is present in the drop down. I have checked the following options:
1) SAP BASIS Component with Adapter Mata data is present in Repository.
2) In SLD, Content Maintenance, class XI Integration Server. There are 3 associated objects (the last column). XI Sub-System viewed application system is also present.
3) The Technical and Business Systems are already created for XI Integration Server in SLD.
I have also suggested the blog /people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory , to the Basis team, however the problem still persits.
Kindly suggest how we can resolve the issue and start executing our scenarios.
Regards
Pravesh
Edited by: Pravesh Sharma on Mar 9, 2009 10:11 AM
Edited by: Pravesh Sharma on Mar 9, 2009 10:12 AM

Hello,
I think the BASIS Team has gone through or implemented this OSS note as it is mention in the blog above. However the problem still persists.
Regards
Pravesh

SLD Business system not appearinn in Integration Directory Configuration

Hello,
I have configured a business system in SLD(defined a Technical system,assigned it to a business system),but when i go to
Integration directory and assign a business system without a partner,I am not able to see this business system.
can any one please help.
regards
kaushik

environment -> clear SLD cache

Business system from SLD not visible in Integration Directory

Hi,
As on the project I do not have access to the SLD, another team created new business systems there. However, when I try in the Integration Builder(Configuration) to assign the newly created systems, I cannot see them on the "Select business systems" page.
What do you think might be the cause of that? (the SLD and the XI systems are fully customized and have been used successfully until now)
Thanks in advance,
George

Hi,
In Integration directory -> Environment(Menu) ->
Click on Clear SLD Data cache and try again.
If you are unable to get even after doing above step check whether cache is up to date or do full cache refresh. This will solve your problem.
Regards,
Sakthi

Message Interface Not found??

Hi friends,
In IDoc to file.
i am using Business Service as receiver.In Business service Reciever side Interface ..i am not finding inbound interface..
interface is in active state in repository..
i did cache refresh also..
please sugget me
regards
ram

Hi Ram,
There can be two possibilities....
1. Either you might not have added your Message Interface to the Business service . If added..
2. you need to check whether the Interface direction is set to inbound in the IR.
Regards
Gopi

Message Interface not running as synchronous

Hi,
We have an synchronous interface which was running fine. We then applied SP18. This inerface now only runs in asynch mode.
Has anybode experienced this before.
Thanks
Martin

Hi Ram,
There can be two possibilities....
1. Either you might not have added your Message Interface to the Business service . If added..
2. you need to check whether the Interface direction is set to inbound in the IR.
Regards
Gopi

Admin Link not working for Integration Directory

Hi ,
I am trying to access the administration page of Integration directory by following the link
http://<host>:<port>/rep/start/index.jsp ; --> Administration --> Directory (Tab) .
Unfortunately It is throwing error as below:-
Application error occurred during the request procession.
Details: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException:
Error compiling [/build_info.jsp] of alias [dir] of J2EE application [sap.com/com.sap.xi.directory].
Exception id: [00145EC551640050000001D7000FE04E00044B0525324DE8]
Even if I am trying to access the ID admin link (http://<host>:<port>/run/support/admin ), it throws the same error.
At the same time the similar access to Integration repository are working fine.
Even the JAVA GUI of Integration directory is launching OK.
Can anybody figure out what might be the problem.
Thanks
Bipin

Hi
The problem seem to be that somehow the alias dir is not found (http://host:port/dir).
Could either try to restart application com.sap.xi.directory or redeploy.
Have you tried to restart the application from NetWeaver Administrator(http://<host>:<port>/nwa) --> Operation Management > Systems> Start & Stop . Select Java EE Application and filter for com.sap.xi.directory. Restart the application.
Also found by going directly http://<host>:<port>/nwa/apps.
Rgds
Erik

Message interface not listed in integration directory

Similar Messages

Maybe you are looking for