Stor.e TV firmware

First of all, sorry for my bad English from Spain
I have a STOR.E TV 1.5 tB device.
Of course when a I bought the device I was thinking that it was better for support to adquire one from a well know company instead of these small companies.
I was wrong, the device firmware is just a very early beta software. if you look for details you can find the tipical "Hello World" screens on the device.
Other question, is that the device appears to be a work in progress just for put something in the market, but the user experience for 200$ is very bad. In my opinion a brick
I just want to say that at least if you don't want to make effort in the development of those devices, at least help the comunity with the software and docs for other people could make de development.
I'm tired of a lot of big companies talking about green responsability, support, and other questions. But if you develop bad products and don't help the community you are contributing to make more waste just for money.
I have 2 laptops from Toshiba, but I would nerver adquire another Toshiba device if you don't help the comunity
Again, sorry for my English from Spain

> I have 2 laptops from Toshiba, but I would nerver adquire another Toshiba device if you don't help the community
Sorry but I must start with your last sentence. This forum exist for several years now and if you check a bit the content of this forum you will see that many issues were solved, many useful information shared between users and lot of problems were solved sharing good and useful tips or information.
So I dont understand this sentence.
You should not be mad or disappointed if nobody will be able to help. You can contact nearest Toshiba service anytime you want and ask for help. They have access to Toshiba database and can pick up all necessary info to help you. So contact Toshiba service, explain the situation and I hope they will be able to help you.

Similar Messages

  • Mac App Store Shows Wrong Firmware Update

    My Mac App Store on my Macbook Air shows an update for the following firmware:
    MacBook Pro EFI Firmware Update 2.9
    Obviously that shouldn't be there since I'm on a MacBook Air. The real issue other than that showing up in the list is that checking for updates times out on the server, sometimes with the timeout 1001 error, and I'm not able to get updates for any other apps, including iTunes.
    Does anyone know how to reset the app store so that it can figure out what kind of laptop I'm using? I tried looking for the com.apple.appstore... file that I saw in the forum somewhere but there was no such file under /Library/Preferences to remove.
    I did manually download that MacBook Pro 2.9 update and ran it to see if that would clear it, but it didn't. (And it wouldn't install, obviously, because it doesn't work on my system.)
    I did download iTunes 11 and installed it outside the App Store, which worked, and I also updated my MacBook firmware to the latest. And finally, I put on the 10.8.2 supplemental package manually, but none of this has fixed the app store.
    Anyone know what to do?

    Fixed my own problem after some searching. I deleted the software update file with this command:
    sudo find / -type f -name com.apple.SoftwareUpdate\* -exec rm -f {} \;
    Then after that it all worked fine, including removal of the MacBook Pro firmware update.

  • Toshiba STOR.E TV+ firmware upgrade

    Hello,
    Is there any unofficial firmware upgrade for the STOR.E TV+ product series? I can clearly see that there's no official firmware upgrade...
    The one shipping with the product looks like "work in progress" (you can see this throughout the entire user interface, which is clumsy and very "90s", but especially if you access the device using your browser - though this one could be useful if your math is rusty and need a little help to perform basic additions :) ).
    Moreover, despite the fact that the product is on the market for over 1 year now, there's no firmware upgrade available (despite the obvious need for one). Sometimes I wonder when would have been the release date if the product's time to market would have been extended in order to have a fully functional product upon the release!
    @ Toshiba developers: if you don't bother to release a firmware at least give the code "as is" to the community. This way you will certainly find someone willing to do (out of pure passion) whatever you were supposed to do (for the money you make as developers, part of those we pay for this product as customers).
    Thanks.

    Hi there,
    As expected, the software is... archaic!
    You can telnet into your box (user: root, no password required) and you'll see the software specs: it is based on BusyBox 1.1.3! There's nothing wrong with BusyBox (a Debian-based Linux distribution, originally intended to run from a single floppy disk, but now able to run to almost anything: phones, routers, NASs...), except for the version: 1.1.3 has been released on May 17, 2006! (Yes, it was already 4 years old when Toshiba decided to put the STOR.E TV+ on the market!).
    The newest version is 1.19.3, released on October 29, 2011 (and, if you follow the release notes, there have been some tremendous improvements form 2006 to 2011!).
    So.. Toshiba guys, when can we expect an update? (I sure would like to have a proof that you're actually working!)
    It is certainly not enough to just throw an update to the CLI-based code; it must be linked to the remote and OSD as well (besides, since Toshiba is not mentioned in the products list on the BusyBox site, I don't expect them to have been used an open code). So just changing the routines, without changing the way they're called for, is useless, and could brick your product.

  • Secure link to iTunes store failed and Connection attempt to firmware update server was unsuccessful

    Hello everyone, Im facing error with my iTunes. When I run diagnostics i can see "Secure link to iTunes store failed" - please see the image below
    Please note: as it is showing secure link to itunes is failed but still i can see iTunes store, but the above error shows when I run diagnostics.
    After that when I go through the next and I found the diagnostics report as below, within report i have marked a line with RED colored "Connection attempt to firmware update server unsuccessful". I need HELP!!!!!
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    Gigabyte Technology Co., Ltd. G31M-ES2C
    iTunes 11.3.0.54
    QuickTime not available
    FairPlay 2.6.12
    Apple Application Support 3.0.5
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.1.2.6
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0012B9F0069DE9C0
    Current user is an administrator.
    The current local date and time is 2014-08-05 01:48:05.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA GeForce 8400 GS 
    **** External Plug-ins Information ****
    No external plug-ins installed.
    The drive G: ZTE USB SCSI CD-ROM Rev 2.31 is a USB 2 device.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {14DCBC2B-34CB-431B-8625-1E62D7310533}
    Description:    WAN (PPP/SLIP) Interface
    IP Address:    10.128.133.101
    Subnet Mask:    255.255.255.255
    Default Gateway:    10.128.133.101
    DHCP Enabled:    No
    DHCP Server:  
    Lease Obtained:    Thu Jan 01 06:00:00 1970
    Lease Expires:    Thu Jan 01 06:00:00 1970
    DNS Servers:    8.8.8.8
            156.154.70.1
    Active Connection:    Teletalk
    Connected:    Yes
    Online:        Yes
    Using Modem:    Yes
    Using LAN:    No
    Using Proxy:    No
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2014-08-04 03:23:27.
    **** Device Connectivity Tests ****
    iPodService 11.3.0.54 is currently running.
    iTunesHelper 11.3.0.54 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    Hi msahed,
    Welcome to Apple Support Communities.
    It sounds like there is an issue with your PC establishing a secure connection to the iTunes Store and the firmware update server. Try following along with the articles below, as they should resolve the issues that you described.
    iTunes: About the "A secure network connection could not be established" alert
    http://support.apple.com/kb/ts1470
    iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814
    I hope this helps.
    -Jason

  • Secure connection to iTunes store failed and could not update to ios 6

    I tried in 4 different pcs with windows 7 installed to update my iphone 4 to latest version of ios (ios6) my current version is 5.1.1. I never had this issue ever before.. My iphone is jailbroken and so i couldnt update with OTA. I also tried to install a fresh copy of ios 5.1.1 to update my phone via OTA.. But the same problem now in itunes 10.5 and 10.7 too.. "iTunes could not connect to iphone software update server or is temporarily unavailable". I checked iTunes itunes diagnostics and the secure connection to itunes storo fail is the only thing which doesnt work.. I tried almost everything from here.. Starting from "internet option", changing the hosts file and the firewall thing.. But couldnt get it better.. What shoud i do?
    Here is my iTunes diagnostics report:
    Microsoft Windows 7 Ultimate Edition (Build 7600)
    eMachines ET1861
    iTunes 10.7.0.21
    QuickTime 7.6.9
    FairPlay 2.2.19
    Apple Application Support 2.2.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.0.59
    Apple Mobile Device Driver 1.62.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0023AEC4028E1440
    Current user is an administrator.
    The current local date and time is 2012-09-23 09:00:21.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 10.7.0.21 is currently running.
    iTunesHelper 10.7.0.21 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {A11C5D80-134D-4FA9-BF81-1C4A418C0F4A}
    Description:    Dhiraagu
    IP Address:    10.151.15.47
    Subnet Mask:    255.255.255.255
    Default Gateway:    0.0.0.0
    DHCP Enabled:    No
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 05:00:00 1970
    Lease Expires:    Thu Jan 01 05:00:00 1970
    DNS Servers:    27.114.138.4
            27.114.140.62
    Adapter Name:    {1EAA0EEE-E778-4884-B030-1AFF603AEC57}
    Description:    Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC (NDIS 6.20)
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 05:00:00 1970
    Lease Expires:    Thu Jan 01 05:00:00 1970
    DNS Servers:   
    Active Connection:    Dhiraagu
    Connected:    Yes
    Online:        Yes
    Using Modem:    Yes
    Using LAN:    No
    Using Proxy:    No
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    Last successful iTunes Store access was 2012-09-23 08:57:21.
    PLEASE HELP ME...!!!

    Hi msahed,
    Welcome to Apple Support Communities.
    It sounds like there is an issue with your PC establishing a secure connection to the iTunes Store and the firmware update server. Try following along with the articles below, as they should resolve the issues that you described.
    iTunes: About the "A secure network connection could not be established" alert
    http://support.apple.com/kb/ts1470
    iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814
    I hope this helps.
    -Jason

  • IMPORTANT: No more "backup every time" or endless apple logo crashes!

    So after 11 crashes where the iPhone wouldn't come back after bootup, I had enough. I took it to the Apple Store and they replaced it. Since then, it crashed 2 more times. Yet again, had enough, and decided to try some experimenting.
    Using this method, I have had no more crashing issues. What's more, the iPhone ONLY tried to do a backup the first time, and doesn't even try (I don't have to press the X) when I sync now. IF you are suffering from the endless apple logo crash, *TRY THIS:*
    1. Unplug your iPhone. If you're stuck at the logo, press the power/lock and home buttons at the same time. Hold them until the phone shuts off
    2. Hold down the home button and plug in the sync cable while holding. Do not let go of the home button until the screen shows up with a cable connecting to iTunes on the phone
    3. Press the button to recover your phone. Wait for the Recovery to finish and the phone to reset
    4. Go into EDIT > PREFERENCES > SYNCING on iTunes. Delete all old backups that you feel comfortable deleting (I got rid of all of them). Also (*VERY IMPORTANT*), click the checkbox next to "Disable automatic syncing for all iPhones and iPods".
    5. Select the radio button to set your iPhone up as a new iPhone. Wait for activation.
    6. Click to sync whatever you want on the Info, Ringtones, Photos, Podcasts, Music, and Movies tabs. *MAKE SURE YOU SELECT NOT TO SYNC APPS.*
    7. Perform a sync, then eject the phone
    8. Set up any config you want (email accounts, settings, ringtones, etc)
    9. Plug the phone in and press the sync button (it will not autosync). When you do, it will sync and take a backup. This backup takes about 3 seconds.
    10. Go to the Apps tab and select to sync ONLY clicked apps. Unclick all apps.
    11. Add your apps one at a time, like so: click the checkbox next to one app, press sync (takes a small amount of time per app). Once the app is done installing per iTunes, look at your iPhone. You'll notice the little spinning internet indicator at the top left is still spinning. Wait until it is done!
    12. Repeat step 11 until finished. Click the checkbox, press sync, wait, *ONE APP AT A TIME*. iTunes will not try to backup every time.
    When you're done, eject your iPhone, move things around, do all your logins you have to redo since it crashed, etc. If you want to, plug the iPhone back in. It will not auto-sync since you turned that off. You can click on another app, click sync, and it syncs the new app WITHOUT a backup!
    *_WHAT TO DO IF THERE IS A PROBLEM SYNCING AN APP_*
    If you try to sync an app (one at a time), and during the sync someone calls you or you get an error in iTunes saying the app had a problem, go to your Apps tab, UNCHECK the app you were just trying to sync, and press sync again. Allow it to de-install fully, then click the box and press sync again to try one more time.
    *_WHAT TO DO IF YOUR PHONE STARTS TO LAG_*
    I don't know if this is a good idea or if it is approved, but when I open a bunch of different programs, my phone starts to get slower and slower. I also notice that when you go into a program you've already opened, it's usually quicker than the previous time. So I'm not sure if this is like OSX, where closing an app doesn't free it up, only by right click closing does it truly close. So here's what I do:
    Go into an app you've already exited. Instead of exiting again, hold down the Home button for about 6 seconds until the app disappears. That seems to cause it to truly close, and the phone will work faster on other things. Now as a disclaimer, you MIGHT be crashing the app...I don't know. But it seems to help.

    Hmm. This sounds pretty similar to my problem. I have gone through three iPhone 3Gs so far in Japan.
    Basically, got two iPhones on launch day, probably the first two sold in my area (White and Black). One for my wife and one for myself. I have a new iMac with 4GB and a year old Macbook Pro 17 with 2GB.
    Each iPhone was synced separately on different computers with different iTunes accounts (Leopard). I have a US and a Japan iTunes account, my wife a Japan iTunes account.
    Anyway, I bought some apps on both sides (Japan and US iTunes sides sepperate computers) and none ever completed there installs. In fact they rebooted the iPhone (both of them) and iTunes crashed. When the iPhones rebooted sometimes the app was on the iPhone other times not.
    Sometimes the crash was so bad the iPhone would not boot up at all and I did a firmware restore (think I have done this 18 times so far). But the problem persisted and not a single app on either iPhone or either computer would install without first crashing iTunes and the iPhone.
    At some point, the crash was so bad the firmware restore no longer worked and basically bricked the phone entirely as it refused to recognize the SIM or iTunes and couldn't even do a restore. I brought that back to Softbank (the carrier in Japan) they had some tech folks look at the phone.
    After scratching there head, switching SIMS and plugging it into various computers, and doing a bunch of other things they replaced my iPhone with another new one from some special inventory they had of factory new phones in cardboard shipping boxes with no packaging except for the sealed phone itself (no wires). I believe these where meant to be loaners while your phone was being sent back to Apple for servicing (this is what I was told afterward in a voicemail message which I still have from Softbank apologizing for the trouble).
    My wifes never died completely but I have stopped installing any apps on it because it still crashes on installs AND removals. It never successfully installed anything without first crashing the phone and iTunes.
    Here's the kicker, as of yesterday morning I was on phone number two, and it was still crashing on installing ANY software from the App store, free or otherwise, via iTunes, or directly from the app store...
    Guess what, it died yesterday and had a blank screen and wouldn't boot at all nor would restore work at all. So today, I went to Softbank again and got it replaced once again (a loaner for the loaner), with a new one no questions asked AND guess what, there was a very upset guy sitting with a store rep with EXACTLY the same problem I had and I overheard the Softbank rep on the phone speaking to another Softbank store I assume asking for another loaner iPhone as they no longer had any loaners left in the store because they lent them all out.
    So being a noisy guy that I am, I asked sympathetically, 'Hey, sounds like Apple is giving you guys a lot of grief.' The guy told me they had replaced 28 iPhones that day at his branch alone because they couldn't revive the phones (forget about activating them) and Apple was not being very helpful. So they have been mailing them to some service center in the US (I was told) where Apple techs where going over the handsets to get some firm answers.
    So now, I have been thru 3 new iPhone 3Gs that have exactly the same problem on two different computers and a forth one that does the same and a guy at the store next to me getting a replacement phone for the same reason and a store that is out of loaners cause they got so many returned dead.
    The fact that Softbank is not even looking at my phone anymore and simply replacing it tells me this is a systemic and a widespread problem at least in Japan and causing Softbank great grief and I am not too amused myself as I got better things to do then visiting cell stores and restoring firmware.
    So clearly there is something very wrong with our beloved iPhone 3Gs firmware or possibly the phone itself or Japan got junk sent over.
    "Apple, fix this problem because you don't want to end up with tens of thousands of dead iPhones on your doorstep do you? -- if you don't already have a truckload from Japan and you might want to fix the 3G reception while your at it cause its embarrassingly terrible in 3G rich Japan."
    Aside from that, I do really love the iPhone and Apple, but love does have its limits and I am starting to feel that I am in an abusive relationship.

  • Any hope for older Mac Pro?

    My Mac Pro is a 2007 model and just under the necessary limit to be allowed to upgrade to either Mt. Lion or Mavericks. Is there any sort of upgrade that would make it eligible? (I can supply exact specs if needed)

    No Mac Pro models sold in 2007 can be upgraded beyond 10.7.5, and that will be running in 32-bit kernel.
    Apple has chosen not to update the firmware that would allow these machines to run 64-bit kernel,  ? perhaps there is not enough RAM to store the newer firmware?
    The only real upgrade path is to convert that machine into Cash, and use the cash to buy a machine that better meets your needs.

  • UCS-E140S Loses CIMC Connection

    I have a number of UCS-140S deployed in our retail stores at various firmware revisions (1.0.2, 2.0.0, and 2.1.0). Attempting to update the firmware from the CIMC using either the individual BIOS/CIMC updates or booting into the HUU 2.1.1 causes me to lose my CIMC connection and then we have to reset the CIMC from within the router. The switch ports have been hardcoded to 100Mb Full as well as AUTO but it doesn't appear to make a difference. This is extremely frustrating and I'm not able to reliably update firmware in my retail store servers. Please let me know if you've seen this issue before and if there is a solution. Thanks in advance.

    Note that I'm using IE9 to access the CIMC.

  • Lombard PowerUP problems (Similar to everyone else)

    Hello All,
    I just bought a Lombard 400mhz, and I'm facing some issues:
    Some facts:
    1) Battery is dead. Pushing the battery button results in a flashing single led.
    2) Measured the PRAM battery, and it seems holding charge: 6v and 3v depending on the wires
    3) Boots normally when I disconect/reconect the power cord.
    4) I'm sure it's not the power jack loose connection. I opened the powerbook yesterday and even include "more solder" on the joints.
    5) When I try to "restart" the machine, it turns off, and when tries to boot (apple sound + drive spinning), it goes all off again.
    6) After that, the only way to turn it on is: back triangle button reset or disconect/reconect the power cord
    Because of all that, I'm unable to install tiger on it. XPostFacto needs to store some Open Firmware configurations right?
    It's incredible how Apple did a machine with so many issues when running with a dead battery. It's not possible to just remove it?

    ombaudsman,
    You can easily remove the main battery and optical drive. There is a lever for each item on the front edge of the body of the 'book that swings out towards you starting at the corners. They are called the expansion bay release levers.
    Here's Apple's getting started guide:
    http://manuals.info.apple.com/enUS/PowerBookG3BronzeKeybdGettingStarted.PDF
    Here is a disassembly guide:
    http://www.ifixit.com/Guide/Device/PowerBookG3Lombard
    If you have to push the power manager reset button on the back panel to get started, you either have failed backside L2 cache or a failing CPU or a problem on the logic board.
    Download Newer Gauge Pro to check the L2 backside cache:
    http://www.macupdate.com/info.php/id/4512
    You can also go to the Apple menu > Apple System Profiler and see if it reports the L2 cache. Cold starting (not a restart) may also throw up a dialog box stating there is a problem with cache memory or RAM.
    Message was edited by: jpl

  • SDK question

    so for any of us to be able to test or receive any new apps, we would have to wait for june or become a developer?

    Correct.
    I don't believe a developer can install their application on an iPhone. An application will be tested with the iPhone using the iPhone simulator included with the SDK.
    Apps will be available via the iTunes App Store only after firmware 2.0 is released.

  • Airport Admin Utility cant find ABS

    Hi all,
    I have an Airport Base Station (Snow) running firmware 4.0.9 and am using Airport Admin Utility 3.1.1 on OSX 10.2.8. Yesterday, I had a local computer store update the firmware from 4.0.8 to 4.0.9. I took the Snow ABS into the store because the wireless connection was being dropped off and on. They updated the firmware, but otherwise found no problems with the ABS. I get the ABS home, login to the ABS, using the reset network name and password the store had reset them to, and re-set the ABS to my network name and 128-bit WEP hex password. Everything proceeded without any errors I thought.
    After exiting Airport Admin Utility (AAU), and re-set my location to use the Airport card, I did indeed see my old network name. Selecting it, I get prompted for the password as I expected. I select WEP 128-bit hex password, type it in and get an error message indicating that password is incorrect! I try typing the password in several more times, both in hex and ASCII. No luck!
    I figured I screwed something up, so I thought a hard reset on the ABS would allow me to get back into the ABS, via the AAU, but no luck. Using my "Airport Reload" location to connect, via the AAU, to my ABS, I can't seem to find the ABS at all now.
    When I updated the firmware myself last June, 2005, I did see my ABS in the AAU list.
    I'm pretty sure I did get a hard re-set to occur, since I now see "No Airport networks in range" when I click the Airport icon.
    Any ideas what to do next?
    Ed

    Hi Stuart,
    I've followed the instructions on both of the Apple articles you'd provided links to. The result is no go. Can't get the Airport Admin Utility to find my base station. Can't even get AAU to authenticate the password I type in for the "Other" basestation. I've tried both a hard and a soft re-set of the basestation. I've also tried for the "Airport Reload" location (as recommended in one of the articles you linked) both the "Manual" IP configuratiuon and the "Using DHCP" configuration. Both a no go.
    Do you know where the configuration file for the Snow basestation is located? The error message I get from AAU indicates that there was a problem reading the config file. Since I never explicitly saved one from the AAU menu before, I don't know the default path, nor the default filename for the basestation's config file.
    Any ideas?
    Ed

  • XAV-701HD and Galaxy S3 SCH-I535

    When I connect my S3 to my XAV-701HD I get "incompatible USB device."
    I assume this is going to require a firmware update for the head unit. Does anyone know if and when this is scheduled to be released?
    Also, any word on the US version of Drive Link? That's probably a Samsung question (waiting on a reply from them) but thought I would ask since I'm here.
    Solved!
    Go to Solution.

    Thank you for your post and welcome to the forums.
    • The Samsung Drive Link app is required to use the MirrorLink feature. The availability of the Samsung Drive Link app will depend on the country, carrier and model number. The Drive Link app is distributed through Samsung Apps or Google Play stores.
    • The firmware of your A/V Center device must start with HR. Check to ensure you have the latest firmware version:
    1. Go to the Home screen on the A/V Center.
    2. Select Settings.
    3. Select Firmware Version.
    • If the MirrorLink connection is not correctly established:
    1. Disconnect the USB cable.
    2. Close the Drive Link app.
    3. Try to connect again.
    • Close the Drive Link app after disconnecting the USB cable
    The same information is included in the link posted below at the bottom of the page:
    http://esupport.sony.com/US/perl/suppor ... l=XAV701HD

  • SGP511 17.1.1.A.0.402 / KB2917929 required / unable to install

    Hi!
    I have just received information about 17.1.A.0.402 is ready. Launched PCC, connected tablet. When I select "Update" it says that KB2917929 is required to continue and opens MS Update page.
    The problem is that this update is not applicable to my system.
    SGP511, Sony Vaio Duo 13 (USB 3.0 ports)
    Windows 8.1 Enterprise Update 1, everything up to date
    Tablet Z2 with .36 firmware
    Any ideas? I don't accept SUS solution. Not going to reinstall everything on the tablet.
    PCC message (KB required):
    WU message (KB not applicable to this system):
    Best regards,
    Sergio PL
    Xperia Z1 / Nexus 7 (2012)

    Nope. It's a plain, clean Z2 Tablet from Sony store. No firmware alterations performed.
    I looked around the web and it seems that there is a bug inside PCC that prevent update on KitKat devices using USB 3.0 port under Windows 8.1. Unfortunately Vaio Duo has only USB 3 ports.
    Finally I used Windows 7 based hardware (Dell Vostro V3300 with Windows 7 32-bit Pro, USB 2.0 port) and it updated without issues.
    However it is quite funny because Xperia Z1 updated from 4.3 to 4.4.2 (687 fw) and later to 757 using the same Vaio machine, under the same OS, using the same cable without problems.
    Best regards,
    Sergio PL
    Xperia Z1 / Nexus 7 (2012)

  • Voice VLAN with SRW224G4P

    Hi all,
    I have been trying to config a voice vlan into this switchs for the last 3 hours and for me this is impossible... I know how to do in a IOS switch but with this switchs is a nightmare...
    I have this topology,
    PC ---- IP phone ----- SW1 SRW224G4P -------- SWCORE SRW2024 --------- Router 2921 CME
    I have this config in my router,
    interface GigabitEthernet0/0
    no ip address
    duplex auto
    speed auto
    interface GigabitEthernet0/0.1
    description LAN
    encapsulation dot1Q 1 native
    ip address 192.168.5.95 255.255.255.0
    ip virtual-reassembly in
    interface GigabitEthernet0/0.100
    description Voice VLAN
    encapsulation dot1Q 100
    ip address 192.168.251.1 255.255.255.0
    ip virtual-reassembly in
    SW1 has created the VLAN 100 and enabled as VOICE VLAN
    The first 3 octes of the mac of my phone is inserted into Telephony OUI Table
    The Auto Voice VLAN Membership is enabled in the port where phone is attached.
    The port that is conected to SWCORE has the vlan 100 configured as tagged.
    SWCORE has created the VLAN 100 and enabled as VOICE VLAN
    The port that is conected to SW1 has the vlan 100 configured as tagged.
    The port that is conected to router CME has the vlan 100 configured as tagged.
    If I config other port into SWCORE with VLAN 100 tagged I can ping from CME to that host.
    Could be the problem a vlan propagation error?
    Somebody could help me? I am desperate...
    Thank you in advance.

    Hi David,
    Thank you for the purchase of the switch.
    .Like anything,  even riding a bike,  the switch is actually very easy to configure, if you have a little bit of practice on it.. 
    You mentioned you are using the " Telephony OUI Table" i guess you have a SF300-24P or ordering p/n SRW224G4P-K9-NA.  Please be specific with the switch models you are using. 
    Are you using the older SRW series or the refreshed SRWxxx-K9 (300 series) switch in the core?
    Firstly, make sure you are using version 1.1.0.73 of the switch firmware. Do that change now or verify that 1.1.0.73 is the active image on the switch.
    The switch has two areas for storing firmware images.  It stores the new firmware in the unused image area.  Check the administration guide for how to upgrade firmware and select new firmware for the next reboot.
    CDP is enabled on the switch when you use the new software, it was not there with older firmware, hence my insistance at upgrading firmware.
    ( Personally  i would prefer you to have a catalyst switch for your ISRG2 CME application, for tech support purposes. But this is the land of the free..)
    I found the following when I added my SG300-28P  to a VLAN aware UC500.
    The UC500  was advertising vlan100 as a voice vlan, configured that by Cisco Configuration Assistant, you might try CCP on your ISR.
    I had a IP phone plugged into switch port G7 and a uplink to my UC500 via port Gig27. 
    The following in blue is a screen copy from my 300 series switch CLI interface.
    You will note the switch automatically populated both VLAN and port information, the only command I added was "no passwords complexity enable," and some usernames,  which  removed from the screen capture below.
    the switch basically configured itself.
    ------------------ show system ------------------
    System Description:                       28-port Gigabit PoE Managed Switch
    System Up Time (days,hour:min:sec):       00,00:12:04
    System Contact:                          
    System Name:                              switch4cf17c
    System Location:                         
    System MAC Address:                       d0:d0:fd:4c:f1:7c
    System Object ID:                         1.3.6.1.4.1.9.6.1.83.28.2
    Fans Status:                              OK
    ------------------ show version ------------------
    SW version   1.1.0.73 ( date  19-Jun-2011 time  18:10:49 )
    Boot version  1.0.0.4 ( date  08-Apr-2010 time  16:37:57 )
    HW version    V01
      Gateway IP Address        Activity status       Type  
    192.168.10.1            Active                  dhcp    
        IP Address         I/F       Type       Status   
    192.168.10.17/24    vlan 1    DHCP        Valid      
    ------------------ show ipv6 interface ------------------
    IPv6 is disabled on all interfaces
    ------------------ show running-config ------------------
    interface gigabitethernet7
    storm-control broadcast level 10
    exit
    interface gigabitethernet7
    storm-control include-multicast
    exit
    interface  gi27
    spanning-tree link-type point-to-point
    exit
    vlan database
    vlan 100
    exit
    voice vlan oui-table add 0001e3 Siemens_AG_phone________
    voice vlan oui-table add 00036b Cisco_phone_____________
    voice vlan oui-table add 00096e Avaya___________________
    voice vlan oui-table add 000fe2 H3C_Aolynk______________
    voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
    voice vlan oui-table add 00d01e Pingtel_phone___________
    voice vlan oui-table add 00e075 Polycom/Veritel_phone___
    voice vlan oui-table add 00e0bb 3Com_phone______________
    hostname switch4cf17c
    no passwords complexity enable
    no snmp-server server
    interface gigabitethernet7
    macro description ip_phone_desktop
    exit
    interface gigabitethernet27
    macro description "switch | no_switch | switch"
    exit
    interface gigabitethernet7
    !next command is internal.
    macro auto smartport dynamic_type ip_phone_desktop
    switchport trunk allowed vlan add 100
    exit
    interface gigabitethernet27
    !next command is internal.
    macro auto smartport dynamic_type switch
    switchport trunk allowed vlan add 100
    exit
    switch4cf17c#sh cdp nei
    Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
                      S - Switch, H - Host, I - IGMP, r - Repeater, P - VoIP Phone
                      M - Remotely-Managed Device, C - CAST Phone Port,
                      W - Two-Port MAC Relay
      Device ID        Local      Adv  Time To Capability   Platform     Port ID
                       Interface  Ver. Live
    SEP503De50F133A      gi7      2     158      H P     CISCO IP        eth0
                                                         Phone
                                                         SPA525G2
    68bdab0fdcfd        gi27      2     169      S I     Cisco SG         gi9
                                                         300-10P
                                                                                               (PID:SRW2008P-K9)-VSD
    switch4cf17c#sh vlan
    Vlan       Name                   Ports                Type     Authorization
    1           1                gi1-28,Po1-8           Default      Required
    100         100                 gi7,gi27            permanent    Required
    Switch automatically figures which ports should be tagged into VLAN 100.
    I did not tell the switch it was connected to VLAN100. I did not add vlan100 to the VLAN database.
    So get the ISR router to advertise VLAN100 as a voice vlan.
    regards Dave

  • Ops Centre Newbie - Getting Started.

    Hi experts,
    We’ve recently made the decision to utilize Ops Centre to patch, provision OS and firmware throughout our UNIX (Solaris & Linux) estate. Whilst I understand the importance to undertake the relevant training, at this point, it’s looking unlikely as the current asking price for such tuition is too expensive.
    I’ve managed to install and configure Ops Centre using the available online Oracle documentation onto a Solaris 10 - SPARC (Oracle VM) platform taking extra care that all pre-requisites outlined in the site preparation guide were met. I opted for the limited configuration during the install (no asset discovery, proxy deployment, storage library etc) but did decide on connected mode and it seems to be working fine. I’ve deployed the co hosted proxy controller and have managed to perform a custom asset discovery on a particular subnet.
    To help us further reach our goals, I’d appreciate if the following questions could be answered in detail (were possible).
    1. In order to apply patches to assets, it’s my understanding that each asset needs to be managed hence each asset must have the agent installed?
    2. What purpose do storage libraries serve and based on our requirements (as above), do we require any?
    3. We have many servers on many different subnets. From my understanding, a proxy controller is required per subnet. Is that the case? Or can the amount of proxy controllers be limited by DHCP or alike for example?
    4. If a proxy controller is required per subnet, then it’ll be far more advantageous for us to deploy proxy controllers into virtual platforms (preferably Oracle Linux). Would this be possible?
    Thanks,
    D.

    1. In order to apply patches to assets, it’s my understanding that each asset needs to be managed hence each asset must have the agent installed?Correct.
    2. What purpose do storage libraries serve and based on our requirements (as above), do we require any?Storage Libraries are primarily for virtual guest storage. zones, ldoms underlying storage.
    Not to be confused with the Software Libraries, which can store the patches, firmware images, OS isos, flash archives, etc.
    You can always add both Storage and Software libraries later if you want.
    http://docs.oracle.com/cd/E18440_01/doc.111/e18416/chapter_softwarelib.htm#BABBDJFH
    http://docs.oracle.com/cd/E18440_01/doc.111/e18416/chapter_storagelib.htm#sthref42
    3. We have many servers on many different subnets. From my understanding, a proxy controller is required per subnet. Is that the case? Or can the amount of proxy controllers be limited by DHCP or alike for example?For OS Provisioning, yes. Or a proxy may be connected to and server multiple subnets for OS provisioning, too. For patch and firmware, not required, as long as ports are open between the proxy and managed assets.
    http://docs.oracle.com/cd/E24628_01/doc.121/e21484/network_reference.htm#autoId5
    4. If a proxy controller is required per subnet, then it’ll be far more advantageous for us to deploy proxy controllers into virtual platforms (preferably Oracle Linux). Would this be possible?Yes. Only restriction (not listed in your requirements though) is that Linux proxies cannot OS Provision OVM Server for Sparc systems (LDOM Control Domains), and in general Solaris OS Provisioning is a little bit limited because the Linux proxies don't have the JET framework built in.
    http://docs.oracle.com/cd/E18440_01/index.htm

Maybe you are looking for

  • Logical Profiles in ISE 1.2

    I created a logical profiles group that is assigned with the Apple-ipad, Apple-iPhone and Apple-iDevice policies. Now ISE will not update the feed policies for the three devices. This is the message that I recieved from ISE when it does it Feed Polic

  • PayPal will not open in Firefox but is OK in Internet Explorer

    How do I fix this.

  • How to display a bulletted list

    Hi All, I'd like to display a list of agreements to the user as a bulleted list.  It's all the things that the user is agreeing to when they submit the application. What would be ideal is if there is a controller that I can bind to an array, and it w

  • Flow of order reasons from crm to r/3

    Hi All I just want to know whether orders can be flowed from CRM to R/3. In my scenario i am creating a return order in CRM with order reasons  and will be replicating the same to R/3. Do order reasons also replicate to R/3 in this case. If so what a

  • My Account Account Transactions does not show all transactions

    I set up a test Webtools site based on OEC Computers backend db and created a WT user linked to Account C41000. When logged in using this user I see that there are three transactions dated in 2005 on that account which did not come accross to WT in t