Message Monitoring - Shows Number of Messages but no Messages or Data
Hello All,
We are facing an issue in Message Monitoring. When we see the Message Monitoring (Database Overview) for the Adapter Engine. It shows the number of Messages that were Successful,
but if we click the Successful messages it shows "0 Messages Found"
This was just happening for only Messages which are older than 3 days. Are there any jobs that delete these messages?
We are running on SAP PI 7.31 Dual Installation.
Thanks,
Harsh
Hi Harsh -
it shows "Persist Until" - Next Day same time the message was sent. Does this mean, I can't see the message after the persisted time??
>>>in a way Yes. but AFAIK - you would still be able to access until the next execution of your delete job.
i.e. If your message has "persists until" value as tomorrow afternoon and your delete job is scheduled to run tomorrow evening then i think you should be able to access those messages until the job finishes..
where can I change the persistence duration? Should I change the Default Delete Job time
>>> changing the default job schedule will not be helpful.
You might have to adjust the property " xiadapter.inbound.persistDuration.default " under the XPI Adapter: XI service
( NWA -> configuration->infrastcrture-> java system properties ->services ->XPI Adapter: XI)
But in case you want to keep it for longer duration may be setup archiving..
AAE Archiving in SAP PI 7.11 with XMLDAS
Similar Messages
-
Trying to edit my payment info. I keep getting the message that my number is not valid for the type of card I have selected. I have a VISA card. I have typed in the number 4 times, but same message pops up.
Thoughts?You are probably entering your Visa's security code incorrectly. Here's how to find it:
http://support.apple.com/kb/HT3541 -
Received error message, suggested uninstall and re-install but get message I don't have priveges to install i-tunes.
Hello murray103
Check out he article below to troubleshoot your install issues with iTunes. You may need to right click on the install file and click Run as Administrator.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Regards,
-Norm G. -
I am trying to move Acrobat XI to a new computer. (Mavericks to Mavericks) Toward to end of the install when 'scripts' a being installed I get an 'Installation error" message. No number or reason just a message to contact the software manufacturer.
I am using a copy of a previous download of Acrobat XI, clicking the .dmg and then on the install package.
Originally, the Acrobat software was brought into the new computer by the Migration Assistant.
Does the install assistant need to be in the mix somewhere? -
Report to show Number of sent and received messages
Hi,
We are on PI 7.1 EHP 1.
I'm wondering if there is a way to set up a daily report that will output the number of inbound and outbound messages by message type?
I know this can be done manually in the RWB but is there a way to automate it?
Thanks,
GarethYes, is possible using standard AbapStack function & tables.
Check in SDN Forum, this is an old 3D.
Re: Get count of the messages to particular Interface in a day and send email
*& Report ZPI_MESSAGES_COUNT
REPORT zpi_messages_count.
TYPES : BEGIN OF gty_filter_t,
ob_system TYPE ait_sndr,
ob_name TYPE rm_oifname,
END OF gty_filter_t.
DATA : im_filter TYPE sxi_msg_select,
pids TYPE sxms_sel_options,
pid TYPE sxmsselopt,
gt_msg TYPE sxmsmsgtab,
gt_fil TYPE TABLE OF gty_filter_t,
gs_fil TYPE gty_filter_t,
gs_fil_t TYPE gty_filter_t,
gs_msg TYPE SXMSMSGLST,
gv_lines TYPE int4,
cnt TYPE i.
PARAMETERS : s_st_dat TYPE sxi_msg_select-exedate OBLIGATORY,
s_ed_dat TYPE sxi_msg_select-exe2date OBLIGATORY,
n_hits TYPE int4 OBLIGATORY.
START-OF-SELECTION.
im_filter-exedate = s_st_dat.
im_filter-exe2date = s_ed_dat.
pid-sign = 'E' .
pid-option = 'EQ'.
pid-low = 'CENTRAL_BACK'.
APPEND pid TO pids.
CLEAR pid.
pid-sign = 'E' .
pid-option = 'EQ'.
pid-low = 'RECEIVER_BACK'.
APPEND pid TO pids.
CLEAR pid.
pid-sign = 'E' .
pid-option = 'EQ'.
pid-low = 'SENDER_BACK'.
APPEND pid TO pids.
CLEAR pid.
pid-sign = 'E' .
pid-option = 'EQ'.
pid-low = 'PE_ADAPTER'.
APPEND pid TO pids.
CLEAR pid.
pid-sign = 'E' .
pid-option = 'EQ'.
pid-low = 'PE_PROCESS'.
APPEND pid TO pids.
CLEAR pid.
im_filter-pids = pids.
CALL FUNCTION 'SXMB_SELECT_MESSAGES_NEW'
EXPORTING
im_filter = im_filter
im_number = n_hits
im_adapter_or = '0'
im_process_mode = '0'
IMPORTING
ex_msgtab = gt_msg
EX_RESULT =
EX_FIRST_TS =
EXCEPTIONS
persist_error = 1
missing_parameter = 2
negative_time_range = 3
too_many_parameters = 4
OTHERS = 5.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
DESCRIBE TABLE gt_msg LINES gv_lines.
SORT gt_msg BY ob_system.
LOOP AT gt_msg INTO gs_msg.
MOVE-CORRESPONDING gs_msg TO gs_fil.
APPEND gs_fil TO gt_fil.
CLEAR gs_fil.
ENDLOOP.
LOOP AT gt_fil INTO gs_fil.
gs_fil_t = gs_fil.
cnt = cnt + 1 .
AT END OF OB_SYSTEM .
WRITE :/ cnt, gs_fil_t-ob_name .
CLEAR cnt.
ENDAT.
ENDLOOP.
WRITE :/ gv_lines, 'Records Received'. -
My Droid Razr HD won't connect to anything when I'm using my cellular data. Also, when I receive messages, a notification pops up but no message is shown at all.
Let's get your phone connected to everything with cellular data Larissaadele! We need some more clues to explore options to resolve! When did this connectivity issue start? For the messaging issue outlined in your post, are you referring to text messages or voice mail messages? What is your phone's software version?
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport -
Get message that serial number is valid but product not found when trying to activate CS6.
Hi,
I need help with installing CS6 to a new computer. I have owned PS since CS and have upgraded through all of the versions. Do I have to download the old versions too now? I don't remember doing that on my new desktop last year. When I try to activate with the serial number it says the number is valid but the product is not found. I have tried my previous version numbers but they are invalid. There is a drop down to choose what product I am trying to activate but CS6 is not even listed. CS6 Extended is but that is not what I have. Can anyone help me with this?you purchased cs6, not as an upgrade.
if that's correct, you do not need any previous versions installed and you should not be prompted for any previous version's serial number.
what exact product did you purchase and what product did you download? -
Message Monitoring Tool in RWB for Integration Engine Messages not working
Hi all
We currently work on a Pi 7.11 system. I f we start the runtime workbench and going to the message monitoring, we want to get in to a message in the integration engine. Normaly we should get the same sxi_monitor in the web browser, but we only get the soap envelope. The pipeline steps on the left side and also the payload cannot be seen.
We increased the rights of the user to sap_all but this did not changed anything. We also implemented the J2EE monitoring rule.
Seems to me as we forgot a setting after installation, but which??
Thanks in advance for your help.
OliverHi Oliver,
I work on PI 7.0 and I know it's very different from 7.1x releases, but your problem sounds like a similar "problem" on 7.0.
Is your message sycronous? At PI 7.0 the default configuration is defined to remove the payload of sync messages. You can change it on JAVA Visual Administrator.
Try to find this parameter in Java Visual Administrator and set it to "false", below you will find the PI 7.0 path to this:
Server >> Services >> SAP XI AF Messaging >> messaging.syncMessageRemover.removeBody
I hope it helps,
Marcelo Vieira -
With an Inbox full message and couldn't download messages any more, I moved most messages to another folder under Archive but still get the same message. Reading from others' posts, I repaired Inbox but all messages there is gone and it keeps thinking forever. Tried compacting Inbox, it keeps thinking. Tried reboot and compacting (all) folders, it keeps thinking. Also deleted inbox.msf, which only one unused out of several email account's folder has, but no help. Sometimes when Inbox stops thinking, checking mail still gets Inbox full message. Wasted a whole morning already ... any idea please?
reboot your computer into safe mode with networking to stop your anti virus interfering and then compact your folders etc.
-
Problem receiving from sender, showing in SmtpReceive log but not Message Tracking
Our Exchange 2007 server (SBS2k8 really) has had problems receiving mail from a certain sender the last few weeks. With the SMTPReceive set to verbose, I can see the mail coming in but it never shows up in the message tracking logs.
Looking at similar issues, I thought maybe the content filtering agent might have been grabbing it, so I set up a transport rule to take any mail from this particular domain and set the SCL to 0 as well as bcc a copy of it to myself. But I just noticed
another entry in yesterday's smtpreceive log and that didn't do the trick (or forward a copy to me for that matter).
I'm including some samples from our SMTP log. I can see that when it works, after the 354 Start mail input line, our server sends a 250 2.6.0 code confirming the message has been queued for delivery, at which point the remote server sends a QUIT and
we close it. But when it fails, there's nothing after the 354 line.
Example of good transmission:
2014-04-23T15:00:49.636Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,0,10.0.100.3:25,50.xxx.xxx.xxx:9100,+,,
2014-04-23T15:00:49.636Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,1,10.0.100.3:25,50.xxx.xxx.xxx:9100,*,SMTPSubmit SMTPAcceptAnySender AcceptRoutingHeaders,Set Session Permissions
2014-04-23T15:00:49.636Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,2,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,"220 xxx.xxx.com Microsoft ESMTP MAIL Service ready at Wed, 23 Apr 2014 11:00:49 -0400",
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,3,10.0.100.3:25,50.xxx.xxx.xxx:9100,<,EHLO other.domain.com,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,4,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-xxx.xxx.com Hello [50.xxx.xxx.xxx],
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,5,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-SIZE 26091520,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,6,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-PIPELINING,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,7,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-DSN,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,8,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-ENHANCEDSTATUSCODES,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,9,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-STARTTLS,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,10,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-AUTH,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,11,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-8BITMIME,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,12,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-BINARYMIME,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,13,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250 CHUNKING,
2014-04-23T15:00:50.026Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,14,10.0.100.3:25,50.xxx.xxx.xxx:9100,<,MAIL FROM:<[email protected]> SIZE=3497,
2014-04-23T15:00:50.026Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,15,10.0.100.3:25,50.xxx.xxx.xxx:9100,*,08D11000FE2BD02F;2014-04-23T15:00:49.620Z;1,receiving message
2014-04-23T15:00:50.026Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,16,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250 2.1.0 Sender OK,
2014-04-23T15:00:50.073Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,17,10.0.100.3:25,50.xxx.xxx.xxx:9100,<,RCPT TO:<[email protected]>,
2014-04-23T15:00:50.291Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,18,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250 2.1.5 Recipient OK,
2014-04-23T15:00:50.338Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,19,10.0.100.3:25,50.xxx.xxx.xxx:9100,<,DATA,
2014-04-23T15:00:50.338Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,20,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,354 Start mail input; end with <CRLF>.<CRLF>,
2014-04-23T15:00:50.525Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,21,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250 2.6.0 <[email protected]> Queued mail for delivery,
2014-04-23T15:00:50.556Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,22,10.0.100.3:25,50.xxx.xxx.xxx:9100,<,QUIT,
2014-04-23T15:00:50.556Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,23,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,221 2.0.0 Service closing transmission channel,
2014-04-23T15:00:50.556Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,24,10.0.100.3:25,50.xxx.xxx.xxx:9100,-,,Local
and an example of the message not being successfully received:
2014-04-24T11:57:37.236Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,0,10.0.100.3:25,50.xxx.xxx.xxx:10131,+,,
2014-04-24T11:57:37.236Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,1,10.0.100.3:25,50.xxx.xxx.xxx:10131,*,SMTPSubmit SMTPAcceptAnySender AcceptRoutingHeaders,Set Session Permissions
2014-04-24T11:57:37.236Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,2,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,"220 xxx.xxx.com Microsoft ESMTP MAIL Service ready at Thu, 24 Apr 2014 07:57:36 -0400",
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,3,10.0.100.3:25,50.xxx.xxx.xxx:10131,<,EHLO other.domain.com,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,4,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-xxx.xxx.com Hello [50.xxx.xxx.xxx],
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,5,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-SIZE 26091520,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,6,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-PIPELINING,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,7,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-DSN,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,8,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-ENHANCEDSTATUSCODES,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,9,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-STARTTLS,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,10,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-AUTH,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,11,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-8BITMIME,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,12,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-BINARYMIME,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,13,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250 CHUNKING,
2014-04-24T11:57:37.579Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,14,10.0.100.3:25,50.xxx.xxx.xxx:10131,<,MAIL FROM:<[email protected]> SIZE=3481,
2014-04-24T11:57:37.579Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,15,10.0.100.3:25,50.xxx.xxx.xxx:10131,*,08D11000FE2BD40D;2014-04-24T11:57:37.220Z;1,receiving message
2014-04-24T11:57:37.579Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,16,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250 2.1.0 Sender OK,
2014-04-24T11:57:37.610Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,17,10.0.100.3:25,50.xxx.xxx.xxx:10131,<,RCPT TO:<[email protected]>,
2014-04-24T11:57:37.719Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,18,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250 2.1.5 Recipient OK,
2014-04-24T11:57:37.750Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,19,10.0.100.3:25,50.xxx.xxx.xxx:10131,<,DATA,
2014-04-24T11:57:37.750Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,20,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,354 Start mail input; end with <CRLF>.<CRLF>,
2014-04-24T11:57:37.875Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,21,10.0.100.3:25,50.xxx.xxx.xxx:10131,-,,Remote
Interestingly, we used to receive email from this sender in the past. When it stopped working, it didn't quite stop working outright - at some point after the deliveries stopped, 2 made it in, but nothing again since then.Check the agent logs on the machine. The Exchange anti-spam agents log files are found here:
C:\Program Files\Microsoft\Exchange Server\TransportRoles\Logs\AgentLog
If you use Forefront, its agent log files are usually here:
C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\FSEAgentLog
Other software may have its log files elsewhere.
--- Rich Matheisen MCSE&I, Exchange MVP -
I have a new MacBook Air and an IPhone. When I send text messages on my iPhone they seem to show up in Messages on my macbook. I don't want my texts to be connected to my Macbook . What steps do I need to take to make sure my text messages only stay on my iPhone.
thanksFollow the instructions under the heading "How to unlink a phone number" on this page.
-
I imported my i photo library into aperture.
I can see the i photo events in aperture library as events with the number of photos in each event.
When you click events in the aperture library no photos appear although if you roll the cursor over the event icon it show the photos. If you click on the event either on the event icon or in the library no photos appear.
HelpCheck, if you have any filters set. The search fields in the Insector panel and the browser should be showing "All items" or "Showing All".
The Browser search field could be set for each project and album individually, so you have to check it for each project.
Regards
Léonie
For example: The projects count shows "20 items", but the browser is empty, because the project's filter is set to show only rejected items. -
I owned an Apple Tv and since I upgrade my internet to higher speed my Apple Tv does not work. Please someone help.
In most scenarios you shouldn't need to forward ports, however if you need to, you may be best contacting your ISP.
As with most router issues, I would recommend that you contact your ISP with details of your problem (assuming that it was your ISP that provided it to you).
There are simply too many manufacturers with different software features and settings and often different names for such features and settings, that the best advice will likely come from those that are knowledgeable about your particular router.
Make sure your router/computer allows access over the following ports
Port
Type
Protocol
Used By
53
TCP/UDP
DNS
DNS
80
TCP
HTTP
AirPlay, iTunes Store
123
TCP/UDP
NTP
Network Time
443
TCP
HTTPS
AirPlay, PhotoStream, iTunes Store
554
TCP/UDP
RTSP
AirPlay
1900
UDP
SSDP
Bonjour
3689
TCP
DAAP
iTunes, AirPlay, HomeSharing
5297
TCP
Bonjour
5298
TCP/UDP
Bonjour
5350
UDP
NAT
Bonjour
5351
UDP
NAT
Bonjour
5353
TCP/UDP
MDNS
Bonjour, AirPlay, HomeSharing
8000-8999
TCP
iTunes Radio Streams
42000-42999
TCP
iTunes Radio Streams
49159
UDP
MDNS (Win)
Bonjour, AirPlay
49163
UDP
MDNS (Win)
Bonjour, AirPlay
The following article(s) may help you.
Troubleshooting Home Sharing
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings -
Resend Message that fails in adapter engine but shows success in sxmb_moni
Hello SDN!!
We are testing sending soap requests out via SSL. We are using a BEA as a pass through server for SSL encryption only.
The scenerio is to send a message from SAP to PI 7.1 to BEA (SSL enc) to Receiving System. We successfully connect to BEA (only used as a pass-through) but the connection to Receiving System does not work. This returns an error to our adapter engine.
My question is this, Since SXMB_MONI shows the message as successful, but the adapter engine is showing an error. What is the best way for
1. Monitor the errors, (I only see where you can monitor the type of adapter only)
2. Resend the message, since it shows valid in SXMB_MONI, it won't let me resend.
Any help will be greatly appreciated and awarded
Cheers
Devlin1. Once the message is in successful status in moni, the best way to monitor becomes RWB -> Message Monitoring.
2. For adapter engine related errors, you may resend the data manually using the resend option in the Message Monitoring. Otherwise, for automatic retry of messages, you may change the default settings.
Regards,
Prateek -
Resending the Mesage in Message Monitoring is failed again & again
H i ! All
In Scenario Idoc to File , the connectivity between XI server & FTP was down , Now is up ,
a message is failed , now again i am re-sending the message from Message Monitoring , showing the belolw error , FTP Connection is UP now , in SXMB_MONI message is processed
Exception caught by adapter framework: An error occurred while connecting to the FTP server '10.10.100.205:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /STORES/102/sapoutbound: The system cannot find the path specified. '. For details, contact your FTP server vendor.
what can be the reason ???
Thanks
AbhishekThe prolem is stil the same .....
today more than 300 mesages get prossed . I can see on FTP , but 23 messages get failed ....using same communication channel ....
I am putting the details
Sucessed messges
Write to FTP server "10.10.100.205", directory "\STORES\0019\sapoutbound", file "ZINV01_ZINVMSG_001920090705-172939-687.XML"
failed messages
Exception caught by adapter framework: An error occurred while connecting to the FTP server '10.10.100.205:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /STORES/193/sapoutbound: The system cannot find the path specified. '. For details, contact your FTP server vendor.
Thanks
Abhishek
Edited by: Abhishek Agrahari on Jul 6, 2009 8:00 AM
Maybe you are looking for
-
How di I watch a rented movie on my ipad2?
How do I watch a rented movie on my ipad2?
-
Windows 7, iTunes 10.5, AppleTV2 latest update - possible fix
So the above combination for me has given trouble since all the updates on Friday. The symptom, and I've seen it repeated in a few other posts below, is this: Running Windows 7, iTunes 10.5: after a short period, the AppleTV2 stops being able to brow
-
Will IOS version C2600 run on all 2600 variants
Is it possible to run C2600xxxxxxxxxxxxxxxxx.bin on any type of 2600 router provided there is enough space in flash to hold the image and there is enough DRAM to run it? That is to say is it possible for me to run a version of IOS I am running withou
-
Social Media Trends for 2014 - Have you noticed them?
Recently I have been conducting some research on Social Media trends that have grown in popularity especially this year and look likley to continue to grow. Here are the top 5 trends that most experts recognise as an area of focus for all social medi
-
I can't move a layer in photoshop CS6 Beta for Mac. I just get a red border
I can't move a layer in photoshop CS6 Beta for Mac. I just get a red border around the canvas. Any Ideas?