Message PLACEHOLDERS

Hi Freinds,
Im using statement 'MESSAGE I002(ZMSG_PM) WITH 'ABCBMMMMM'.
But the message displays the message stored in 002 in message class zmsd_pm andit does not show 'ABCBMMMMM'.
I want to display message with the message defined in msg class with some additional data.
How to do this
Thanx
RR

Dear rajiv
Other wise u can try like this also ....
U declare a variable like
data: l_message(100).
then wherever u want message
Concatenate 'msg1variable' 'msg2 variable' into l_message.
now u can use that l_message.
regards
karthik
Let me know if u face any issues.

Similar Messages

Incomplete/Incorrect Alert notifications

Good day all.
We set up application monitoring in our SolMan system. The only problem that we're having is that the alert messages we get are incorrect.
What basically happens is that the message placeholders are not replaced with the message variables in the alerts. If you open slg1 though, you get the full correct message.
E.g I would get a message like 'Unrecognized response from credit. & & & &' instead of 'Unrecognized response from credit. IND_AFFORD_IND = N is invalid for Appl.- 0050761111 for BP - 134900427'
So my question here is whether it would be possible for me to pull the correct alert text straight from slg1log or if there's is any other way of getting the message variables replaced..
Any help on this will be greatly appreciated.
Kindest Regards
Vincent
Edited by: Vinchacho on Aug 29, 2011 3:33 PM

Hi Lydia
I think there is some confusion here - I don't see the possible answer?
I am showing in the Mirror Monitor Screenshot that there was NO STATE CHANGE to show that the CONNECTION was lost!
Rather it is showing the state change to SYNCHRONIZING
Thanks Howard Diesel
Hi Howard,
Refer to this
article, in the Database Mirroring History dialog box, the possible mirroring states are as follows.
◦Unknown
◦Synchronizing
◦Synchronized
◦Suspended
◦Disconnected
According to the error 1479, it indicates that the Mirrorred instance doesn’t receive any responses to ping for 10 seconds from Principal server. It is caused by network latency. To work around this issue, we can increase the timeout value from default 10 seconds
to higher value via the following T-SQL. For more details, please review this blog:
Adjusting the automatic failover time for SQL Server Database Mirroring.
ALTER DATABASE dbName SET PARTNER TIMEOUT 20
Thanks,
Lydia Zhang

Destination DLL disabled. []: [CrystalEnterprise.Smtp]

Hi,
When I am trying to schedule a report in infoview, the status shows failed and displays this error :
destination DLL disabled. []: [CrystalEnterprise.Smtp]
i have changed the destination settings and added to and from in it and the metrics option says
true for SMTP Email destination default setting valid is true..
could you please help me out...
Thanks in advance
DV

Hi Toor,
Please go through by below link..
How to do Scheduling Crystal Reports?
Antony
Follow these steps.
There are two ways to configure EMail destination settings:
    1.1 Default settings can be configured on destination tab of specific job server.
    1.2 Report specific settings can be configured to change default settings while scheduling the report.
To enable the Email settings in the job server, navigate to:
    Home >> Servers >> ReportSpeficJobServer
and Enable the "Email (SMTP)" option in the Destination Name list.
Then click on "Email (SMTP)" link to set the following options:
    3.1 Domain name (Mandatory).
    3.2 Server Name (Mandatory).
    3.3 SMTP Port (Mandatory).
    3.4 Authentication details if required (Optional).
    3.5 Email settings for From / To / Cc (This can be configured while scheduling the report as well).
    3.6 Subject / Message / Placeholders are optional.
    3.7 Checkbox "Attach report instance to the email message" can be uncheck if it is required to send only the confirmation of Successful instances.
    3.8 If checked, File Name settings can be configured (Optional).
Click on update to save the settings.
Make sure SMTP port is opened .SMTP Default port is 25.
Thanks,
Amit

Fill placeholders within message strings dynamically on jspx pages

Hello all,
i am searching a solution for the following problem.
Let's assume the following key/value pair exists in the message resource bundle:
targets.delete.confirmation=Do your really want to delete the target "{0}"?
On a jspx page there is a confirmation dialog. The code looks like that:
<af:dialog id="dialogDel" type="yesNo" closeIconVisible="true"
title="#{nls\['targets.delete.title'\]}"
visible="true" modal="true" partialTriggers="tabTgt tabTgt:btnDelete"
dialogListener="#{backingBeanScope.targetsBean.dialogDel_action}">
<af:message messageType="confirmation" message="#{nls\['targets.delete.confirmation'\]}">
<f:attribute name="{0}" value="#{bindings.TgtName.inputValue}"/>
</af:message>
</af:dialog>
Now i want the placeholder {0} getting filled at runtime dynamically with the inputValue of the appropriate binding.
The code as shown doesn't solve the problem.
I'm experienced in developping web applications with ADF UIX and there i got this done with the following code:
<boundAttribute name="title">
<messageFormat format="${nls\['targets.delete.confirmation'\]}">
<dataObject source="${bindings.TgtName.inputValue}"/>
</messageFormat>
</boundAttribute>
What's the equivalent to 'messageFormat' in ADF Faces??
Any help will be appreciated.

Hi,
Not sure if this will help, but rather than using proper messages, can you just use a piece of output text like:
<h:outputFormat value="#{nls['targets.delete.confirmation']}">
<f:param value="#{bindings.TgtName.inputValue}"/>
</h:outputFormat>The outputFormat tag is from the JSF HTML tag library
Dave

Error message in reports

Hi Friends,
How error message occured in ABAP Reports & solution for that ?

Hi Dhananjaya,
also check this.
Messages allow you to communicate with users from your programs. They are mainly used when the user has made an invalid entry on a screen.
To send messages from a program, you must link it to a message class. Each message class has an ID, and usually contains a whole set of message. Each message has a single line of text, and may contain placeholders for variables.
All messages are stored in table T100. You create and edit them using Transaction SE91. Once you have created a message, you can use it in the MESSAGE statement in a program.
Also,
In SE91, you can see all the error message details.
For information, if the error message shows "V10222", you have enter the first three digits in "Message Class" and last three in "Number". This means, whatever the message number is, the last three digits has to be entered in "Number" and the value precedes this last three numeric value has to be entered in Message Class.
And finally,
Let me put it this way..
Every Error Message belongs to a Message Class.
So, a particular Message Class will have a number of Messages under it.
You need to know the Message class first. For Sales we have the following message classes V1, V10, V2, V4, V5, VD, VU, VV, VX, WVA
*If you want to know all the message classes available for a transaction:-*
For knowing all the Message Classes for a particular transaction, you goto-->SE93, put the transaction code and choose display. After this, there is a button on the top (Display Object List), press that button. On the left hand side you will get the Object Name-(example: VA in case of sales). Drop down there and choose Message Classes. You will get all the message classes there.
If you know the Message Class and want to see the Messages under it:
So, goto-->SE91, put the message class and choose Display
cheers,
Hema.

Message not seen in SXMB_MONI

Hello Experts,
We are sending MATMAS IDoc from ECC system through PI 7.1 to third party using HTTP.
When Material is sent using transaction BD10 an IDoc gets triggered and is visible in transaction WE02 in green status.The Port used to send the IDoc data is the same that is configured in the Partner Profile for the PI system.
But the corresponding message is not visible in SXMB_MONI of PI.
Please help!
Thanks in advance,
Suraj

Hello Prateek,
Yes it is showing stuck in SM58 with status '::000'
If we see the help of status it shows "Field contents that were used for the placeholders in the statement MESSAGE."
We cannot understand what this status means or how to resolve it.
Please help!
Regards,
Suraj

How to display field values in long text of messages....

Hi,
Currently iam doing an userexit. In that i want to display error messages. and if we click on message it will display the long text. My question is i want to display field values in the long text. Under the long text's &system_response& i want to display a field value.
Regards
chinna

Hi Chinna,
Within short and long texts, you can use placeholders, which can be replaced with the content of data objects using the MESSAGE statement. A maximum of four character-type placeholders are permitted; they are indicated by #&i# in short texts, and by #&Vi&# in long texts, where i = [1, 4]. If #&# itself is to be displayed as part of the text, it must be specified as #&&# in short texts and as "&" in long texts.
To add some detail on how to create variables in Long text, you have to go to 'commands' and in symbol option provide the variables like
&V1& &V2& and so on.
Hope this helps you.
revert for further clarification.
<b>Alwyas reward Points to useful suggestions.</b>
Regards,
Vikas
Message was edited by:
Vikas Taneja

Images in Outlook 2010 messages disappeared (SOLVED)

Racking my brain on this one, and tried a ton of things found in googling. I have Outlook 2010 with both a work Microsoft Exchange and personal Gmail IMAP set up, and both have stopped showing pictures embedded in e-mails. They just show
a completely blank box (no red X). I've been through all the "Show pictures" settings in both Outlook and Word. I disabled, rebooted, and then re-enabled just to be sure something wasn't stuck. I've also tried clearing the Temporary Internet
folder. Even went so far as to create a dummy Admin account and completely DELETE the Temporary Internet folder so system could do a scratch rebuild. Similar steps on Gmail. Deleted the entire account from Outlook and created it as new.
All my IMAP messages pulled right back in, but still no images.
Any idea of other things I might try? At a loss here . . . . .
~Vol

Well, about the time I posted I found the answer to my own question. They are both things that I had tried, but I guess I had never tried them at the same time!
STEP 1:
- Close Outlook.
- Go to this registry key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
- Rename “OutlookSecureTempFolder” key as OutlookSecureTempFolder.old”
- Re-start Outlook
STEP 2:
- Create new email
- From e-mail compose screen, go to File / Options / Mail / Editor Options / Advanced and make sure that "Show picture placeholders" is NOT checked
- Close & re-start Outlook
Hopefully that tidbit helps someone else. Thanks!

What is '&' used in message class

Hi,
What is '&' used in message class with the message no in SE91.
Give me details idea on this.
Best Regards,
Chini

If you use '&' operator in your message, then you can pass the text/literals whatever you want to get display in the message.
For example,
In a message clase zmsg, there is a message like this...
018 Table & not exist
you can call this message from your program by passsnig the table name in to this message...
For example,
ztablename = 'BUT000'.
Message e018(zmsg) with ztablename.
Filling Message Texts Dynamically *
Message texts in table T100 can contain up to four ampersand characters (&) as placeholders. You can replace these at runtime using the WITH addition in the MESSAGE statement:
MESSAGE ... WITH f1 ... f4.
The contents of fields f1 ... f4 are then inserted sequentially into the message text in place of the placeholders.

To through custumize warning messages while creating PO

Hi All,
I want to through some warning message throgh user exit while creating PO is there any standar message id i can use to through warning message i know '00' with number 398 but that is working only for error message.
Regards
Sagar

If you're doing these in an exit, you decide in your code whether A,E,I,W, message type. Beware though, how you present...you might want to do I messages with the "display like E" addition. I utilize message 016 from message class GR a lot...It's just placeholders and you can then issue messages with three or four values, like:
message e016(gr) with
<document> <item> 'text' 'more text'
etc.... mix and match up to four values, literals, constants, text-elements, etc.

Extended sytax check error for messages

Hi I am doing a Extend syntax check for a report and i am getting fowloing error for the messages displyed in report. in the report the stranded message class' MESSAGE ID 00' is used. i am getting this error in extended check:
No. of WITH fields of MESSAGE 398 for ID 00
TEXT-001
No. of placeholders in this message: 4
Message: & & & &
Highest placeholder number in long text: 4
Long text:
&CAUSE&
Please suggest me how to correct the same. i tried taking the text element but too i am getting this messages.
plz help me
mahesh

Hi Mahesh,
The message number 398 of message class 00 has four place holder, which means its expecting you to pass 4 values in message statement. It seems you are pass just one parameter after TWITH .
You can either pass SPACE for rest of parameters as
MESSAGE s398(00) WITH 'TEST' space space space.
or you can hide the message with "#EC *
MESSAGE s398(00) WITH 'TEST' . "#EC *

Supress error message in reports 6i

I am brand new to reports.
I validate a date parameter in the AFTerFormParmater. If the
date is null (blanked out) I want to issue an srw error message
and reset the date on the form to a default.
I get the my srw error message but
then I also get a system error message about the "trigger failed"
how can I supress this message
in addition - how can I reset the date so it is not blank when
the parameter form is redisplayed.
I cannot run the report from a normal form as I have not taken'
the forms class yet. Everything needs to be done from reports
itself.

Hi Dhananjaya,
also check this.
Messages allow you to communicate with users from your programs. They are mainly used when the user has made an invalid entry on a screen.
To send messages from a program, you must link it to a message class. Each message class has an ID, and usually contains a whole set of message. Each message has a single line of text, and may contain placeholders for variables.
All messages are stored in table T100. You create and edit them using Transaction SE91. Once you have created a message, you can use it in the MESSAGE statement in a program.
Also,
In SE91, you can see all the error message details.
For information, if the error message shows "V10222", you have enter the first three digits in "Message Class" and last three in "Number". This means, whatever the message number is, the last three digits has to be entered in "Number" and the value precedes this last three numeric value has to be entered in Message Class.
And finally,
Let me put it this way..
Every Error Message belongs to a Message Class.
So, a particular Message Class will have a number of Messages under it.
You need to know the Message class first. For Sales we have the following message classes V1, V10, V2, V4, V5, VD, VU, VV, VX, WVA
*If you want to know all the message classes available for a transaction:-*
For knowing all the Message Classes for a particular transaction, you goto-->SE93, put the transaction code and choose display. After this, there is a button on the top (Display Object List), press that button. On the left hand side you will get the Object Name-(example: VA in case of sales). Drop down there and choose Message Classes. You will get all the message classes there.
If you know the Message Class and want to see the Messages under it:
So, goto-->SE91, put the message class and choose Display
cheers,
Hema.

The images in my text messages are disappearing.

The images in my text messages are disappearing. Some I've sent and some I've received. Some are weeks and weeks old, some just a couple days. I'm using iPhone 6Plus with 8.0.2. Any ideas what's happening here?
Regards, John

I have the same condition on my iPhone only. I also have an iPad, a Macbook Air and an iMac that share the same iCloud account. Messages with photos seem to work fine on all devices except my iPhone. All of a sudden all the photos in my iPhone message streams have disappeared and been replace by question mark placeholders. I rebooted all devices, shut down messages, and rebooted, restarted, with no luck. Very bizarre and extremely frustrating. Any suggestions?

Mail thinks the messages I send are Junk?

I tried to open a message I send in Mail only to find the following message:
"The message from James Hurley <[email protected]> concerning “MyMessage” has not been downloaded from the server. You need to take this account online in order to download it."
When I did a search for a key word I knew to be in the message, the message was found but Mail said: "Mail thinks this message is Junk Mail."
It's one thing for the filter to judge incoming mail as junk, but quite another to judge my outgoing mail as junk. I'll be the judge of that, thank you very much.
I did get a response to the message I sent, so it did go out.
What gives with Mail?
Jim

Have you made any changes to the junk filter in Preferences > Junk Mail > Advanced? You may be able to fix the issue of sent messages being marked as junk as follows:
1. Go to Preferences > Junk Mail, disable junk mail filtering, then enable it again. This resets the rule that governs what the junk filter does.
2. Choose either Training or Automatic mode (it doesn’t matter) and leave the other options checked. Click Advanced to see how the junk filter rule is defined now if you want, but don’t touch anything there.
3. Reset the junk filter database (Preferences > Junk Mail > Reset).
As to the “You need to take this account online in order to download it” error message, is only this message that has this problem? What type of mail account is this (POP, IMAP, .Mac)? If IMAP or .Mac, what are your Preferences > Accounts > Mailbox Behaviors > Sent settings?
BTW, posting real email addresses in a publicly accessible forum such as this is a bad idea. Posting an email address using placeholders (e.g. [email protected]) is equally informative and keeps the real address undisclosed.

Validating Dates in JSF using convertDateTime an overriding message format

Have seen a way to validate dates with this kind of code snippet:
         <h:inputText id="departDate"
            value="#{flight.departDate}">
           <f:convertDateTime pattern="dd/MM/yy"/>
         </h:inputText>
         <h:message for="departDate"/>-----
This results in an ugly default error message when things go wrong like so:
j_id_jsp_1447383442_1:departDate: 'a' could not be understood as a date. Example: 28/02/08
Is there a way I can override this by using some sort of message placeholder, so I get a message like:
*"Depart Date 's' is invalid"*
So placeholder message would be *"[0} {1} is invalid"*, where parm *0* would be *"Depart Date"* and parm *1* would be value *"#{flight.departDate}"*.
I know you can resort to a full blown custom converter class, but I was wondering if I could put a message formatted with placeholders directly into the code snippet.
Is this feasible?

After several more iterations of testing, I discovered the problem is actually due to using the trinidad rendering kit. Part of my migration to 1.2 involved experimenting with the use of the trinidad components. I thought I had removed all the trinidad stuff from my application during testing of this date problem, but I discovered that I had left the following in:
web-app library:    trinidad-1.2.10
faces-config.xml entry:
    <default-render-kit-id>
            org.apache.myfaces.trinidad.core
    </default-render-kit-id>once these items were removed, the application worked as expected. So it looks like the problem is with the trinidad rendering kit/library.
Edited by: emprice26 on Aug 11, 2009 6:02 PM

Message PLACEHOLDERS

Similar Messages

Maybe you are looking for