Message: "The database structure has been modified" every time I log to SAP

Hello,
"The database structure has been modified. In order to resume this process, all open windows will be closed". Every time I log to one of my companies in SAP Business One this message appears.
I haven't installed any new addons and made no changes in database structure (and any other user hasn't done any changes), but this message appears always when I log to company for the first time (when I try to log on another user or log to another company there is no message). Can anyone help me with this problem?
Best regards
Ela Świderska

Hi Ela Świderska,
You may check this thread first:
UDFs disappeared
Thanks,
Gordon

Similar Messages

  • The Database Structure Has Been Modified

    Good Day!
    Just want to ask what is the probable reason why upon using SAP, there is a system message " The database structure has been modified. In order to resume the process, all open windows will be closed. Continue?"  Even upon user log in , this system message appear affecting other user's data entry. Upon adding of the document (of other users when this system message appear), all the UDFs are missing, causing their data entry to be inaccurate since you cannot update row level once the document has been added.
    Hope to hear from you soon.
    Thanks
    Sandra

    Hello ...
    This error message appears every time that has altered the structure of the database, either by creating a new field of user or user table, so it is inevitable that appear the same.
    Now, it is necessary as a measure, to control who has access to make these changes, and that they are made without users.
    I hope it will help
    Best regards,

  • The database structure has been modified - how to check if it happend?

    Hello,
    I have a question. How to check if the database structure has been modified? I know that there is shown a messagebox after creating table and adding some fields, but sometimes this message appear after some seconds. The problem is that I want to create table and UDO for this table, and until database structure is not modified I got an error message. If I wait and DB strucuture modifies then UDO is creating correctly.
    My question is - does anyone know how to check if database structure has been modified?
    Regards,
    Hmg

    Hi Szymon,
    I guess you are stuck up in a kinda scenario, where in, you will be populating a form with values, before the structure modifies, if this is going to be your problem, I can help you out with a work around.
    In the beginning of the process, before the creation of the UDO or tables, set a boolean value to false, and once all UDO's and Tables are created, only then, should you make it true and only after the boolean becomes true, you should proceed with populating the values from the screen.
    I really ament sure what your problem is, but one of my guys faced this problem, I then, thought even you might have a similar problem.
    Satish.

  • DATABASE STRUCTURE HAS BEEN MODIFIED PROBLEM...

    Hi
    I am getting the message " The database structure has been modified " after every 5 minutes.
    Regards

    Hi,
    You may check this thread:
    Message: "The database structure has been modified" every time I log to SAP
    Thanks,
    Gordon

  • The application Entourage has unexpectedly quit - every time I quit?

    Ever since I upgraded to 10.3.9 I get the message "The application Entourage has unexpectedly quit" every time I close it out.
    It hassn't seemed to have hurt anything, but I always wonder if it is not the first sign of an impending total system crash on my aging unit.
    POWERBOOK G4 Titanium (2002) Mac OS X (10.3.9) Entourage, v.10.0.0 (1309)
    POWEBOOK G4 Titanium   Mac OS X (10.3.9)  

    It is probably a coincidence that the problem coincided with your upgrade but do go to Microsoft's website and make sure your Office installation has the most recent update for your version.
    The problem is probably being caused by your E'rage database being damaged. Quit E'rage and then restart while holding the option key. This will force E'rage to rebuild/repair the database which should take care of the problem.

  • I continue to receive message that "We could not complete your iTunes Store request. An unknown error occurred (4002). Please try again later." This has been happening every time iTunes Match runs in background. Any suggestions for a cure?

    I continue to receive message that "We could not complete your iTunes Store request. An unknown error occurred (4002). Please try again later." This has been happening every time iTunes Match runs in background. Any suggestions for a cure?

    Found a potential solution here:
    https://discussions.apple.com/thread/4332757
    Gsleeroy
    Re: error 4002 in itunes match do you have a solution? 
    Sep 23, 2012 10:08 AM (in response to matracaelcan)
    Hi All,
    I had this problem today myself, and was frustrated repeatedly by the '4002' error.
    I have literally just fixed the issue by doing the following steps:
    1: Go to the 'Store' tab and select 'Turn Off iTunes Match'
    2: Return to the 'Store' tab and select 'Update Genius'
    3: Wait for this to complete succesfully, the return to the 'Store' tab once more and select 'Turn On iTunes Match'.
    4: iTunes Match will now go through the motions and should succeed!
    I hope this helps

  • Firefox will not keep igoogle as my home page. I have done all of the steps to do so but every time I log off and then comeback, google is gone. This is a new problem; igoogle on Firefox has been my homepage for years.

    iGoogle has been my homepage for years. All of a sudden when I logon I now get the Firefox welcome page not Google. I have done all of the steps Firefox indicates to make iGoogel my home page but it keeps reverting to Firefox after I logoff.

    Check these out
    https://support.mozilla.com/en-US/questions/807756
    https://support.mozilla.com/en-US/questions/807756
    https://support.mozilla.com/en-US/questions/826342
    Check and tell if its working.

  • Why do I get "The form data has expired." every time with Flash formatted CFFORM moved to CF 9.1?

    We are moving a ColdFusion site from CF8 to CF9.1 and have discovered that any CFForm that was uses Flash as it's format keeps giving us the "The form data has expired." error almost every time we visit the page containing the form.  We have fiddled with the timeout settings and even tried to add the various "cfheader" workarounds that some people have mentioned when getting this error, but to no avail.  To be clear this works perfectly on CF8 *and* it works on our CF 9.1 QA server, but for some reason fails on the Live Server.  Supposedly the Live server completely matches the QA server, but the behavior is sure different in this instance.
    What could be the issues?  What Apache or CF settings might I look into?  Could there be some weird permissions error on the generated swf form file or some other obscure reason?  I am totally in the dark and can't figure out why ColdFusion keeps thinking the form data has expired.
    Please, any ideas would be welcome.
    Thanks!

    Make sure the web server settings between the QA and the Production servers are also compatible.
    I suspect your suspecion about permissions is the closest to the answer.  But this is a little out of my depth of expertise.
    Realize that ColdFusion default behavior is to NOT generate and actual swf FILE.  Rather what it does is generate the swf content in memory and directly deliver it to the client.  But if the web server is configured to look for an actual file system file you may have a clash going on

  • I blocked quite a few different phone numbers awhile ago but when I looked at the blocked numbers today it looks like the same number has been blocked multiple times.  Does anyone know why that is?

    I blocked a lot of different numbers awhile ago but when I checked the blocked numbers today it looked like the same numbers were blocked multiple times.  So for example if I blocked phone numbers 555-555-5555, 555-555-5556, and 555-555-5557 on different days it looks like only 555-555-5555 has been blocked 3 different times and I no longer see phone numbers 555-555-5556 or 555-555-5557.  Does anyone know why?

    Oh dear, one of those phantom disconnections. You know they are actually so common BT have a specialist department that deals with them. I think they are called Priority Back in Service, there is no actual phone number you can ring them on, you have to call 150 as normal and the customer service team are supposed to raise the issue with them to sort out.
    You could contact that Mods but they sometimes take 3 days to reply, especially with it being the weekend.

  • How to stop the mixed-content Yes/No question every time you log in or change screens.

    Since the new VZW forum format when I log in or change screens I have been asked if I want to accept content that was not sent encrypted (HTTPS:\).  See attached photo to see what I mean.
    Speaking for myself, I found this very annoying so here is how to stop it if you are using Windows Internet Explorer.
    Bring up Windows Internet Explorer.  I use IE8 and it fixed mine.
    Then go to TOOLS>Internet Options and Select the Security Tab.  Then Click the Custom Level button.  Next go down through the list in the Miscellaneous Section and change "Display Mixed Content" to ENABLE.
    Hope this makes your day a bit brighter, it did mime!
    JerryF
    If you want to see more about this you can look here.
    http://blogs.msdn.com/b/askie/archive/2009/05/14/mixed-content-and-internet-explorer-8-0.aspx

    jco23,
    Go back and again check to see that it is ENABLED.
    I say this because the first time I "tried" to enable it, it didn't enable it.  I tried again and discovered that I did NOT do the proper exit procedure when closing (leaving) the miscellaneous list after I changed it to enabled.  Oh dopey me!!!
    The second time it worked.
    JerryF

  • WAE 512 - ver 4.1.5b.7 - nodemgr: The device_mgr service has been disabled.

    Hi
    I have restarted the WAE and now I've this message:
    The device_mgr service has been disabled.
    here is message from CLI:
    ASERVER-53#sh alarms
    Critical Alarms:
         Alarm ID             Module/Submodule     Instance
       1 svcdisabled          nodemgr              device_mgr
    Major Alarms:
    None
    Minor Alarms:
    None
    Is it possible to try manualy enable this service ? (After next restart I have the same message).
    If you need any additional logs please let me know.
    Thanks you in advance for your help.
    James

    James,
    I found following exception thrown:
    com.actona.services.configuration.MgException: TimePeriod is not time because it doesn't consist of 'time' element
        at com.actona.services.configuration.MBeanConfigAttribute.objectFromXML(MBeanConfigAttribute.java:158)
        at com.actona.services.configuration.MBeanConfigAttribute.(MBeanConfigAttribute.java:52)
        at com.actona.services.configuration.MBeanConfig.getAttributesFromXML(MBeanConfig.java:118)
        at com.actona.services.configuration.MBeanConfig.(MBeanConfig.java:39)
        at com.actona.services.configuration.ApplicationConfig.loadConfiguration(ApplicationConfig.java:182)
        at com.actona.services.configuration.ApplicationConfig.(ApplicationConfig.java:55)
        at com.actona.services.configuration.Configurator.(Configurator.java:47)
        at com.actona.services.Loader.(Loader.java:82)
        at com.actona.services.Server.(Server.java:65)
        at com.actona.services.Server.init(Server.java:170)
        at com.actona.services.Server.main(Server.java:231)
    [FATAL] 2011-01-12 14:05:52 UTC - Server: Caught MgException - com.actona.services.configuration.MgException: TimePeriod is not time because it doesn't consist of 'time' element
    Nested exception: TimePeriod is not time because it doesn't consist of 'time' element
    com.actona.services.configuration.MBeanConfigAttribute.objectFromXML(MBeanConfigAttribute.java:158)
    com.actona.services.configuration.MBeanConfigAttribute.(MBeanConfigAttribute.java:52)
    com.actona.services.configuration.MBeanConfig.getAttributesFromXML(MBeanConfig.java:118)
    com.actona.services.configuration.MBeanConfig.(MBeanConfig.java:39)
    com.actona.services.configuration.ApplicationConfig.loadConfiguration(ApplicationConfig.java:182)
    com.actona.services.configuration.ApplicationConfig.(ApplicationConfig.java:55)
    com.actona.services.configuration.Configurator.(Configurator.java:47)
    com.actona.services.Loader.(Loader.java:82)
    com.actona.services.Server.(Server.java:65)
    com.actona.services.Server.init(Server.java:170)
    com.actona.services.Server.main(Server.java:231)
    A quick look in our database and I THINK I found the answer for you.
    I found a previous case where under rare circumstances an XML would become corrupted and solution was to run a script.
    I'm actually not sure if I'm supposed to provide you with the script (there's always quite a few concerns with this), but I'm going to risk it.
    However you can only run the script at your own risk and if it goes wrong please reimage the device.
    Regarding CM and how devices are recongnized, forgive my inoreance but I believe it was in part mac address (or something else imprinted into device) of device, but can't remember for sure, nor have the time to look for it.
    HTH,
    Marcin

  • [svn] 4443: The direction property has been changed to gridDirection.

    Revision: 4443
    Author: [email protected]
    Date: 2009-01-08 10:53:00 -0800 (Thu, 08 Jan 2009)
    Log Message:
    The direction property has been changed to gridDirection. Here is the update for the sample.
    Added Paths:
    flex/sdk/trunk/samples/explorer/charts/GridLinesExample.mxml

    Revision: 4443
    Author: [email protected]
    Date: 2009-01-08 10:53:00 -0800 (Thu, 08 Jan 2009)
    Log Message:
    The direction property has been changed to gridDirection. Here is the update for the sample.
    Added Paths:
    flex/sdk/trunk/samples/explorer/charts/GridLinesExample.mxml

  • "Itunes has stopped working" every time

    So recently I have been using itunes and a moment after it loads up I am faced with the window "itunes has stopped working", every time. I have tried doing stuff with QTmoviewin.dll, messed around with QuickTime, deleted anything that may conflict with Itunes (including bonjour). I have turned the internet off and ran it, but to no avail. I have literally tried every trick in the book, looked on all the forums and nothing seems to be working. The crash always happens when I open it, the bar at the top seems to be downloading something, gets to Never Gonna Give You Up and says "Determining Audio Volume". Then it crashes. And I can't get to it quick enough to stop it. So I really need some answers, but I would like to keep uninstalling as a very last option. And try not to refer me to another thread because I have seen nearly every one. Please help me. Thank you.

    Hello El Chubbo,
    Thanks for using Apple Support Communities.
    To troubleshoot iTunes crashing unexpectedly please follow the troubleshooting steps in the article below.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Take care,
    Alex H.

  • Same window opens in Finder every time I log in

    Any idea how I can prevent the pl.lproj window from opening every time I log in? Thanks!

    Sorry about that! Yes, I should have mentioned it.
    Anyway, I created a new admin account and as you suspected the window did not open at login. The account I'm logging in with is a network account and the "opening window" does not follow the account to other Macs.
    I trashed the com.apple.finder.plist file and at login it created a new one but the window still opened. Sigh...

  • Software Update runs every time I log in

    How do I stop software update from running every time I log in? I have it set to check for updates weekly (the default), but it starts up every time I log in.

    Welcome to Apple Discussions:
    It might be a corrupted .plist.
    First try this:
    Uncheck the box for checking for updates.
    Reboot
    See if the problem still occurs.
    If so, create a new temporary admin account and see if the problem occurs with the new user.
    Report back

Maybe you are looking for