Messages getting stuck in SMQR when ABAP proxy is triggered.

Hi Gurus,
I have written an ABAP client proxy in my CRM system.
When the proxy was triggered in CRM sxmb_moni data was in green flag state
I used transaction smqr in CRM and then refresh the blocked queues.
In CRM sxmb_moni data was in successful state again.
Is there any way to reprocess the data which is stuck in SMQR automatically.
I have already scheduled the JOBs RSQIWKEX and RSXMB_RESTART_MESSAGES in the CRM system still facing the issue when the proxy is triggered.I can see the messages stuck in SMQR.
Any help will be highly appreciated.
Regards,
Amitanshu

Hi,
In CRM system
goto SMQ1 & SMQ2 Clear(Delete) all the strucked Queues.
Goto SMQR and say Delete all the Queueus
Goto SXMB_ADM-Manage Queueus-Just Say Register
Now trigger and check
Regards
Seshagiri

Similar Messages

  • My iPhone 4S hangs (gets stuck or unresponsive) when deleting photos from the camera roll or use Messages app

    I am now on my third replacement phone from Apple because of this issue.  My iPhone 4S frequently hangs (gets stuck), without response, when I click on the trash icon to delete a photo, for about 20-30 seconds before becoming responsive again. I notice that this problem of freezing happens also when I use my Messages app for texts. There is no crash that occurs because the app responds after hanging for some time, therefore does not create a crash report to be sent to Apple.  I never had this problem on my iPhone 4, and truly regret upgrading to the new device. I bought this phone for the faster processor, however I ended up with a device that is much slower and unresponsive. At the instruction of the multiple geniuses at the Apple store, I've restored the phone numerous times and set it up as a new device to no avail, and have lost app data every time.  I've had three different phones now, and the genius cannot resolve my issue. they've even done what's called a DFU mode restore to restore the device firmware, yet no fix.  Is anyone having similar issues? I'm starting to think its a software issue, although the apple store kept replacing my phone with a "remanufactured phone" even though I was within the 30 day return period. When I asked to get a new phone from the box, they told me it couldn't be done since I had my device replaced with a repair model already. 

    I suffer same.  AppleCare can't seem to solve the problem.  I did a restore from backup. Then I did a restore as new phone (virgin). Then I did a restore as a new device and then backed up from a stored backup (which does not replace media).  To no avail.  Some days it works fine, and on others it's extremely bothersome. The major symptoms:
    1. It can take 5+ seconds to delete a photo.
    2. It can take 10+ seconds for the camera app to activate. In many instances, the moment is long gone.
    3. Switching from camera to video can take 5+ seconds.
    4. Saving a photo that's been optimized in iOS 5 can take 30 seconds. Absurd.
    Note that Photos and Camera aren't the only affected applications. What'sApp can have the same issues on occasion. Voice Memos don't respond like they should, either.  I suspect that there's some behind-the-scenes operations with network feed to which iOS gives its full attention (contrary to the UX getting full attention is is historically the case). This makes the user interface painfully slow at times — and, as most of us here would agree — painfully annoying.  This might have to do with changes designed around iCloud, but I'm not even (yet) using it.
    The bottom line is that what used to be a quick, pretty good phone camera is now totally lackluster and unreliable for fast shots.  Sometimes I think Apple spends too much time worrying about form and not enough about function.

  • Messages getting stuck in SMQ2

    Messages get stuck in SMQ2 with the Error msg "SQL error on database occurred when accessing a table".
    This is happening on PI system 7.11 SP04 with Max DB version 7.7.06.07.
    This typically happens when sending messages from one BPM to another although it has more of a random pattern.
    A corresponding dump is also seen in ST22.
    The dump details are as below:
    Runtime error : DBIF_RSQL_SQL_ERROR
    Exception : CX_SY_OPEN_SQL_DB
    Database error text : Invalid numeric value for parameter/column (10)
    Internal call code : "[RSQL/UPDT/SWFRXIHDR ]"
    Any help is highly appreciated in resolving this issue.
    Regards,
    Murali Narayanan

    > The dump details are as below:
    > Runtime error : DBIF_RSQL_SQL_ERROR
    > Exception : CX_SY_OPEN_SQL_DB
    > Database error text : Invalid numeric value for parameter/column (10)
    I would update the kernel (plus the database interface library lib_dbsl) to the latest patchlevels and try again. If the error persists I'd upgrade the database to the latest patchlevel. If it still doesn't work I'd open an OSS call (BC-DB-SDB).
    Markus

  • Message getting stuck in XBQO queue - Time limit exceeded

    Hi All,
    We have a BPM scenario in our project (on PI 7.0 SP18), where bundle of PEXR2002 Payment IDocs are received as a single flat file. This file is then consumed by the BPM, to split the message into multiple payments using Java Mapping.
    However, when we get an IDoc file of size greater than 5 MB (more than 500 IDocs), the message gets stuck in XBQO queue and eventually giving a SYSFAIL with the message "Time limit exceeded". Could you please let us know if you have encountered a similar issue and are aware of a possible solution.
    Any pointers to this will be really appreciated.
    Thanks & Regards,
    ROSIE SASIDHARAN

    H Rosie,
    1)  Goto SXMB_ADM-> Integration Engine Configuration->Parameter  EO_MSG_SIZE_LIMIT->possible values 0 - 2,097,151 (KB)
    The parameter EO_MSG_SIZE_LIMIT enables serial processing of messages of a particular size. This applies for messages with the quality of service Exactly Once (EO). If the message is larger than the parameter value, the message is processed in a separate queue.
    2)  Goto SXMB_ADM-> Integration Engine Configuration->Parameter  HTTP_TIMEOUT->possible values n Seconds, where n is a whole number.
    The parameter Specifies the timeout for HTTP connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
      See SAP Note 335162  for sysfail issue....
      Hope these will help u....
    Regds,
    Pinangshuk.

  • Messages getting stuck in QRFC Queue

    Hi,
    Today I noticed that a message had gotten stuck with the status "Sheduled for Outbound Processing" (scenario IDOC->XI->File), XI 3.0 SP11.
    This in turn had the effect that the whole QRFC queue got stuck, and all following messages got stuck with status "Sheduled".
    I had to remove the first message from the queue manually so that XI could start to purge the other messages from the queue.
    What could be the reason for the first messages getting stuck with this status ("Sheduled for Outbound Processing")?
    The message was very small, just a couple of lines. One thing that comes into mind, is that XI received 4 IDOCS for the same interface, within one second. These 4 messages were assigned to different queues, but one of them got stuck. Could there be problems with XI when several messages arrive on the same interface within a very short time?
    Is it possible to use Alerts to detect this kind of problem in the future? As I have understood, Alerts only handle XI "errors", but according to XI, this message did not have an "error status", it just had the status "Sheduled for Outbound processing"..
    Thanks for any help,
    Hans

    Hi,
    If the message got struck in Queue, you try to activate the queues in smq2 to reprocess the data instead of deleting it. This is the final solution. But you should able to see a dump in ST22 for this problem.
    thanks,
    sasi

  • Everything is updated!!  iPhone, iPad, iTunes and MacBook Pro...  All I am trying to do is drag content from my iTunes Library to the devices.  iTunes gets stuck EVERY single time!  What usually triggers the Non-Sense is when I am adding a 2nd file!

    Everything is updated!!  iPhone, iPad, iTunes and MacBook Pro...  All I am trying to do is drag content from my iTunes Library to the devices.  iTunes gets stuck EVERY single time!  What usually triggers the Non-Sense is when I am adding a 2nd file!
    Why does iTunes SUCK??
    1) Many items greyed out in the menu bar, for well over 2 years, maybe more!
    2) I Can't drag more than one piece of content from your iTunes library to any device (iPhone, iPad)
    If you do it gets stuck for HOURS and HOURS in "Preparing To Update" and the little activity circle never completes, ever!!
    I used to be able to drag over 1000 tunes, movies, etc. go have breakfast come back and it would all be on my device!!
    Can't do it anymore, one song at a time, maybe an album at a time, or one movie, and that is it!!
    If you do a 2nd item the other items stop loading and never continue!!
    This is so BAD, I don't understand how they don't have this fixed yet!!
    Please tell me I am not the only one!!
    ...and If I am tell me how to fix it!
    Very appreciated,
    Joe

    Everything is updated!!  iPhone, iPad, iTunes and MacBook Pro...  All I am trying to do is drag content from my iTunes Library to the devices.  iTunes gets stuck EVERY single time!  What usually triggers the Non-Sense is when I am adding a 2nd file!
    Why does iTunes SUCK??
    1) Many items greyed out in the menu bar, for well over 2 years, maybe more!
    2) I Can't drag more than one piece of content from your iTunes library to any device (iPhone, iPad)
    If you do it gets stuck for HOURS and HOURS in "Preparing To Update" and the little activity circle never completes, ever!!
    I used to be able to drag over 1000 tunes, movies, etc. go have breakfast come back and it would all be on my device!!
    Can't do it anymore, one song at a time, maybe an album at a time, or one movie, and that is it!!
    If you do a 2nd item the other items stop loading and never continue!!
    This is so BAD, I don't understand how they don't have this fixed yet!!
    Please tell me I am not the only one!!
    ...and If I am tell me how to fix it!
    Very appreciated,
    Joe

  • Messages getting stuck in tcp_local Channel

    Hi All
    Version
    Sun Java(tm) System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004)
    libimta.so 6.1 HotFix 0.01 (built 12:52:04, Jun 24 2004)
    SunOS dakota 5.9 Generic_112233-12 sun4u sparc SUNW,Sun-Fire-V440
    Background
    In the last week we've been experiencing problems with outgoing messages getting stuck in our tcp_local channel. They can stay for up to 4 hours before dequeuing. We plan to install Patch 116568 which is the latest core patch for our version of the Messaging Server.
    To date we haven't experienced any DNS problems and have not made any configuration changes.
    However I was just wondering if anyone had come across this type of problem before? We're hoping the patch will resolve the issue but would be interested in other alternatives.
    Thanks in advance
    Paul

    You'll have to do more research before I can offer help. . .
    It's not unusual for some messages to be retried, and depending on the destination, that may take a while.
    Some outside domains are always slow. If you have many messages queued for such outside domains, they can involve the whole server, and cause mails to queue up behind them.
    Many installations create a new channel, such as, "tcp_slow", and use rewrite rules to move messages addressed to these domains (aol, hotmail, earthlink, etc.) into this separate channel. You can "tune" that channel differently, and messages there won't block tcp_local.

  • When i run keynote in the play mode, some times the computer get stuck, why?, when i run key note in the play mode, some times the computer get stuck, why?

    when i run keynote in the play mode, some times the computer get stuck, why?, when i run key note in the play mode, some times the computer get stuck, why?

    hello,
    I had the same issue. This is what I was told to do.
    iWork has to be removed completely to be effective when re-installing, you must use an application removal tool to do this or it wont remove every Keynote file.
    Appcleaner   will do this and its free.
    The following procedure has helped solve many issues with Keynote:
    1  Close Keynote then use Appcleaner
    2  Empty the Trash
    3  Shut down the Mac, then restart and press the shift key immediately after the startup sound, then release shift when the Apple logo appears
              allow the Mac to boot up to the desktop, it will take longer then usual as the hard drive is being repaired
    4  restart the Mac
    5  Reinstall iWork
    6  Repair permissions:
              Applications > Utilities > Disk Utility > First  Aid:   click on your system disc in the drive column
              and select Repair  Disk Permissions
    7  open Keynote and test

  • FCPX gets stuck on 0% when trying to export video

    Hi.
    Final Cut Pro will always get stuck at 0% when I try to export a video in the "Apple Devices" format. This just started happening recently. Is there any way I can get this to start working again?

    Are you editing with H.264 natively?  FCPX will freeze on a "bad frame" in an h.264 cut (usually at the very beginning of the clip.) If you are editing H.264 natively, you can usually get FCPX to behave if you right click on your Event clips and Transcode > Optimized media. You should also trim off the bad frames (they are typically solid green) in the storyline.

  • From time to time, my outgoing mail messages get stuck in the "outbox".  I'm having trouble resolving the problem.

    From time to time, my outgoing mail messages get stuck in the "outbox".  I'm having trouble resolving the problem.

    I use Comcast. My computer (Mac Air) also uses my iCloud and Me accounts. The message I get back says they are all offline.

  • My iphone 4 is getting stuck during gaming when sim card is inserted. Call anyone help me out to solve this problem?

    My iphone 4 is getting stuck during gaming when sim card is inserted. Call anyone help me out to solve this problem?

    That doesn't make any sense to me at all, unless the games you're trying to play have some sort of online connection/capability and you're in a weak signal area, thus the games can't make the required online connection. What happens when you turn cellular data off in settings: Settings>General>Network>Cellular Data>Off.

  • Messages gets stuck up in active state

    Hi ,
    In our production environment, we are facing strange issues for the past 1 week.
    Issue 1:
    Messages gets stuck up in active state. In our message tracking mechanism ,the status is successfully sent to destination party. The message should not hold up in active state in first place?
    If we restart the Host instance, it is creating duplicate and processing it which is creating misssing ICR issue.
    Per day message flow-200 messages
    Please suggest ?
    Kind Regards,
    Giri.a
    girishkumar.a

    Hi Girish, 
    I believe OFTP adapter is not native adapter(in box) for BizTalk Server.
    So, is there any logging mechanism in OFTP adapter?
    Also, can we connect to the FTP server using some other tool like Filezilla etc. If other 3rd party products are also not able to connect to this server then we can say that its not a BizTalk issue.
    Thanks,
    Prashant
    Please mark this post accordingly if it answers your query or is helpful.

  • Messages getting scheduled in SAP ECC Box:Messages getting stuck in Inbound

    The scenario is -
    JDBC Sender-->> SAP PI-->> ECC Server(via ABAP proxy)
    The Interface is running properly in SAP PI & then the messages are getting posted to the Inbound queues in SAP ECC Box. Generally it takes few seconds for the messages to get processed, but now all are getting scheduled in the Inbound queues(in different channels as seen in SMQ2)
    We re-ran the interfaces again a few times, but all of them kept getting scheduled. Finally, after 2 hours one of the messages got processed. I suppose we won't face any problem now onwards.
    Though I can see several suggestions like registering the queues & assigning dedicated queues to the interface, none of the blog suggest the probable cause of the event?
    Can this be due to some issue in the server(heavy pressure of data in the server during the period/issue in the queues??)
    I found the following links regarding issues like these --
    XML file getting stucked in queue in ECC
    Message in scheduled state
    Thanks

    Is the printing issue with one specific printer or across system.
    What method you have configured for output device.
    There should be any issue if you add spool work process to Application server.
    Then you should be able to configure spool server load balancing. (Search on help.sap.com for spool load balancing)

  • Queue Stucked - Exactly Once Async Abap Proxy

    Hi Guys
    I have several JMS->Xi->Abap Proxy scenarios in my production environment, the Abap Proxies servers are in a SAP IS-OIL 4.72 with a SAP WEBAS 6.20 and the XI is the XI 3.0.
    Some of the Abap Proxies calls are asynchronous, and when one of the abap proxies has an sysfail error (for example), it stuck the entire queue, and this is causing some problems, for the other calls (interfaces) that are not being processed until the "bad" abap proxy is "solved".
    I know that we can schedule a job that reprocess the call but imagine that the problem is still not solved, I still have the other calls waiting, ie, I am putting in jeopardy some interfaces because of one error.
    It seems that this queue management happens because SAP IS-OIL is treating all asynchronous AbapProxy calls as EOIO calls.
    <b>1. Is my previous assumption correct???</b>
    <b>2. How can I invoke from SAP XI3.0 an asynchronous Abap Proxy just with EO quality of service???</b>
    <b>3. How can I setup the CCMS to alert when a queue is “stucked” (please be aware that I have a ERP SAP has a SAP WEBAS 6.20)???</b>
    Take Care
    PC

    Hi Moorthy
    > You are calling Proxy from XI right ?
    Yes
    > What is the source system ?
    The source system is a 3rd party app that sends an XML message via JMS to XI, XI then calls the abap proxy that is in our SAP ISOIL.
    > You can restrict the quality of service in the
    > Outbound Interface..i.e message coming into XI.
    >
    Are you saying that has to be the 3rd party that has to say to Xi that the async call that XI will have to do to SAP ISOIL has to be EO??? How can this be done?? Is in the Message Interfaces configuration - Integration Repository???
    Remember that I'm having queue problems in SAP ISOIL, where the abap proxies are processed !!!
    > Here is the link for CCMS -
    > http://help.sap.com/saphelp_nw04/helpdata/en/e5/5d1741
    > b393f26fe10000000a1550b0/frameset.htm
    > https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/
    > 2894
    > https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/
    > 2895
    > https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/
    > 2777
    >
    Thanks a lot for the links, it seems that is good head start.
    However I'm concerned that because my SAP ISOIL has the SAP WEBAS 6.2 (old Integration Engine), the CCMS features that are explained in the links will not work in the old version. Remember that I've probably have to configure the CCMS in XI3.0 (my integration platform) and SAP IS-OIL my main system, where all abap proxys are run and called, where IDOCS are sent and received, ie, is the point of origin and final point of all my integrations... 
    That's why I'm so concerned about the stopped queues in SAP ISOIL, I really need full availability in this system (queues), I am talking around 10.000 messages being sent and received... and in the near future will be around 100.000 messages for sure...
    > Regards,
    > Moorthy
    Take Care
    PC

  • Lost message from XI 3.0 to ABAP proxy

    Hi,
    we are currently trying to send a message from SAP Rel. 4.5B by RFC to XI 3.0 and then posting it by ABAP proxy technology to an SAP System 4.7 based on WebAS 6.20
    Everything seems to be fine while the message is marked "successfully processed" in the XI but we cannot find the message in the destination system. It seems that the message gets lost in the XI.
    We've already checked our parameters and everything seems to be well maintained.
    <b>Does anybody has had a similar problem? Could this be a communication problem between XI 3.0 and 2.0?</b>
    Thanks for any comment.
    Christina

    Hi Colin,
    just to be sure that we are talking about the same.
    In the Integration Engine we defined in SM59 one entry of type "R/3 connection" with the parameters
    - target host: /H/SAP01L0C.cdc.xxxx.com
    - system number: 40
    - gateway host and gateway service
    In the Integration Builder (Configuration Runtime) we defined one communication channel for the destination system with the parameters:
    - Transport Protocol: HTTP 1.0
    - Message Protocol: XI 2.0
    - Adapter Engine: Integration Server
    - Adressing Type: URL Address
    - Target Host: SAP01L0C.cdc.xxxx.com
    - Service Number: 8440
    - Path: /sap/xi/engine?type=receiver
    and the part with the authentication data including logon language and client.
    Do we have to make an additional entry in SM59 in the Integration Engine of type "HTTP Connections to R/3 System"?
    Regards,
    Christina

Maybe you are looking for