Metastat error "there are no exsiting databases

Good day
We have a numerous T2000, T5220 and V240/V245 in our fleet. Most have mirrored drives supporting the Solais 10. On one of our v245 we appear to have lost one of our drives. The metastat command returns the following:
bash-3.00# metastat
d6: Mirror
Submirror 0: d16
State: Needs maintenance
Submirror 1: d26
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 56894016 blocks (27 GB)
d16: Submirror of d6
State: Needs maintenance
Invoke: metareplace d6 c1t0d0s6 <new device>
Size: 56894016 blocks (27 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s6 0 No Maintenance Yes
d26: Submirror of d6
State: Okay
Size: 56894016 blocks (27 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s6 0 No Okay Yes
d5: Mirror
Submirror 0: d15
State: Needs maintenance
Submirror 1: d25
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 20484288 blocks (9.8 GB)
d15: Submirror of d5
State: Needs maintenance
Invoke: metareplace d5 c1t0d0s5 <new device>
Size: 20484288 blocks (9.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s5 0 No Maintenance Yes
d25: Submirror of d5
State: Okay
Size: 20484288 blocks (9.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s5 0 No Okay Yes
d4: Mirror
Submirror 0: d14
State: Needs maintenance
Submirror 1: d24
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 20484288 blocks (9.8 GB)
d14: Submirror of d4
State: Needs maintenance
Invoke: metareplace d4 c1t0d0s4 <new device>
Size: 20484288 blocks (9.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s4 0 No Maintenance Yes
d24: Submirror of d4
State: Okay
Size: 20484288 blocks (9.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s4 0 No Okay Yes
d3: Mirror
Submirror 0: d13
State: Needs maintenance
Submirror 1: d23
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 20484288 blocks (9.8 GB)
d13: Submirror of d3
State: Needs maintenance
Invoke: metareplace d3 c1t0d0s3 <new device>
Size: 20484288 blocks (9.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s3 0 No Maintenance Yes
d23: Submirror of d3
State: Okay
Size: 20484288 blocks (9.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s3 0 No Okay Yes
d1: Mirror
Submirror 0: d11
State: Needs maintenance
Submirror 1: d21
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 4202688 blocks (2.0 GB)
d11: Submirror of d1
State: Needs maintenance
Invoke: metareplace d1 c1t0d0s1 <new device>
Size: 4202688 blocks (2.0 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s1 0 No Maintenance Yes
d21: Submirror of d1
State: Okay
Size: 4202688 blocks (2.0 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s1 0 No Okay Yes
d0: Mirror
Submirror 0: d10
State: Needs maintenance
Submirror 1: d20
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 20484288 blocks (9.8 GB)
d10: Submirror of d0
State: Needs maintenance
Invoke: metareplace d0 c1t0d0s0 <new device>
Size: 20484288 blocks (9.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s0 0 No Maintenance Yes
d20: Submirror of d0
State: Okay
Size: 20484288 blocks (9.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s0 0 No Okay Yes
Device Relocation Information:
Device Reloc Device ID
c1t1d0 Yes id1,sd@n500000e01579f140
c1t0d0 Yes id1,sd@n500000e0157a12f0
But when I run radictl on the same unit, the respnse is No RAID volumes found
on the T2000, raidctl will show the devices, but metastat says no existing databases.
why?

In further research, the answer is you either setup raid 1 disk mirroring using raidctl (which is hardware driven), or meta (which is software driven)
on our v245 the RAID was setup using the software.
iostat -En results are below:
bash-3.00# iostat -En
c1t0d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: FUJITSU Product: MAY2073RCSUN72G Revision: 0501 Serial No: 0717S0A4JK
Size: 73.40GB <73400057856 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
c0t0d0 Soft Errors: 1 Hard Errors: 0 Transport Errors: 0
Vendor: MATSHITA Product: DVD-RAM UJ-845S Revision: D100 Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 1 Predictive Failure Analysis: 0
c1t1d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: FUJITSU Product: MAY2073RCSUN72G Revision: 0501 Serial No: 0717S0A4CU
Size: 73.40GB <73400057856 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0

Similar Messages

IllegalStateException: There are 2 open Databases in the Environment.

Does anyone have any advice on properly handling these exceptions? I get this occasionally on an Environment.close call:
SEVERE: Exception in thread "pool-11-thread-4"
SEVERE: java.lang.IllegalStateException: There are 2 open Databases in the Environment.
Closing the following databases:
persist#Flow#com.sleepycat.persist.sequences persist#Flow#com.sleepycat.persist.formats
at com.sleepycat.je.Environment.closeInternal(Environment.java:472)
at com.sleepycat.je.Environment.close(Environment.java:321)
at name.justinthomas.flower.analysis.persistence.FlowReceiver.closeEnvironment(FlowReceiver.java:67)
at name.justinthomas.flower.analysis.persistence.FlowReceiver.addFlow(FlowReceiver.java:104)
at name.justinthomas.flower.collector.FlowWorker.parseData(FlowWorker.java:379)
at name.justinthomas.flower.collector.FlowWorker.v9(FlowWorker.java:112)
at name.justinthomas.flower.collector.FlowWorker.run(FlowWorker.java:62)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:619)
That is thrown on the "environment.close" line in this section:
private void closeEnvironment() {
if (environment != null) {
try {
environment.close();
} catch (DatabaseException e) {
System.err.println("Error closing environment: " + e.toString());
... which is called as a "finally" at the end of my insert function. Should I just catch these and ignore them? Or is there something I should be doing to prevent these from occurring?

Hi Justin,
JE data is stored via Database objects. When you using the DPL, your EntityStore opens and closes the Databases for you. If you don't call EntityStore.close, it won't close the Databases and you'll get this "warning exception" when you close the Environment. Note that if you open/construct an EntityStore more than once, you'll have to close each instance.
If you only see this message occasionally, I suspect that you're getting an exception during your app processing, before you close your store. The exception causes you to skip your normal shutdown code, that closes the store, so the store is not closed. You're probably not catching this exception and logging it, and it is not thrown upward because of the exception thrown by Environment.close. To find out what's happening, you'll need to catch and log the exception.
--mark

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

J2ee1.4 installation error - there are no files requiring installation

hi all,
i downloaded the j2ee sdk 1.4 bundle and installed successfully on my suse 8.2. however when i tried doing it on another suse 8.2 machine using the same bundle i got an error that says :
There are no files requiring installation - here's all the output -
Checking available disk space...
Checking Java(TM) 2 Runtime Environment...
Launching Java(TM) 2 Runtime Environment...
Error: There are no files requiring installation.
Deleting temporary files...
i'm new to j2ee so plz, if any one knows how to get around this, let me know.
thanks,
rich

This message will be issued if files necessary for installation are not found once the self-extracting executable extracts its content. If you successfully used same distribution file to install on another machine, it is very likely that the distribution file got corrupted while being moved from one system to another.
If you use ftp to transfer files between systems, make sure that you transfer file in binary mode.
If you don't have the original distribution file anymore, you might need to download the distribution again.

WF error: There are no workflows that have already worked with this object

Hello all,
I am getting the error "There are no workflows that have already worked with this object" when I go to IQS23--> enter notification number --> workflow overview. I tried to find information related to this error message but could not find anything. If anyone happen to know anything about this error, please let me know.
Thanks.
Mithun

Hello,
As the error message says, it can't find any workflows that have dealt with the instance of the object you're inquiring about.
If you know this isn't true, or if you don't know what object this concerns, the you could try debug to see which object is being searched for.
regards
Rick Bakker
Hanabi Technology

CCMS Error - There are system problems on the remote host (system failure)

Hi,
I have installed the SAPCCMSR agent in the AccAD(Accelerated Application Delivery) server. However, when I execute OS07 and try to view the CPU usage, I encountered this error:
There are system problems on the remote host (system failure)
Message no. S1308
Any idea what does the error mean?
Thanks.
KY

Hi,
Thanks for replying. The problem has been resolved after upgrading the sapccmsr.
Thanks.
Regards,
KY

Wheni am tried to settle order i got error There are no accrued amounts; s

Wheni am tried to settle order i got error There are no accrued amounts; settlement is not possible.

Hi Guru,
Details of production order
Target quantity =1,063,893      Delivered quantity =1,063,893     confirmed quantity = 1,074,945     EA     Basic start =07.04.2009     Basic finish   =01.11.2010     TECO PCNF DLV PRC GMPS MANC RESA SETC*
When i am trying to close order system gives Error messsage
000 Unprocessed future change recs for order SS50008TT/1A prevent del. fl
000 Order SS50008TT/1A is partially confirmed
Unprocessed future change recs for order SS50008TT/1A prevent del.
flag/completion
     Message no. CO688
Diagnosis
     There are still future change records or error records to be process
     from the confirmation for the confirmation processes in order
     SS50008TT/1A. Possible confirmation processes are:
     o   Automatic goods receipt
     o   Backflushing
     o   Calculation of actual costs
     o   Data transfer to HR
System Response
You are not meant to set the deletion flag/'completed' status
with future change records that have not been processed.
edure
You should process the open future change records using
o   Predefined confimration process or
o   The CORUPROC program, by dispatching it in Customizing in
    background job (dispatch background jobs: dispatching proc
Check if incorrect goods movements or incorrect actual cost ca
exist for the order, and reprocess these if necessary:
o   Reprocessing incorrect goods movements
o   Reprocessing incorrect actual cost calculations

VC Error: There are no BI systems defined in portal/ no authorization

Hi,
when trying to launch the BI integration wizard on an iview in Visual Composer in the ESA Discovery system I get the follwing error message:
"WARNING 2005: There are no BI systems defined in portal. In order to use BI integration wizard, you must first define at least one BI system based on the BI XMLA, BI ODBO, BI JDBC, or BI SAP Query Connector."
When I click on the "Find data" button in VC I am able to see the names of BI systems in the System drop down box and can search queries and execute them. So the BI must be connected.
I did not change the original configuration of portal or VC.
When trying to launch the MDX editor or SQL editor I get the error message that I am not authorized to do this, but I am logged on as user admin or user j2ee_admin.
Can somebody help me please
Best Regards
Maximilian Lohrer

Question has been sent twice, I close it.

Error: there are non exicisable item with cenvat tax code

I am getting an error message there are non exicisable item with cenvat tax code while trying to add po for pick and pack from sales order. I request all of you to help me with it.
I have already checked if the item and ware house is exicisable in the check box of the master data.
Best regards,
Sandesh.Sreyamsh

Thanks mahendra and rahul,
Unfortunately my issue is not solved yet, the tax is not manually created it was created by sap during new company creation. I checked by adding other tax type in sales order but every time when I try to create sales bom it gives the above error.
@ Rahul the tax is under cenvat type and the Items has been added under exercise transaction. here is what im trying to do
I created a sales order for 4 of my items.
Then i try to create po for two of my as pick and pack items by checking Purchase orders indicator under logistics tab of sales order.
At this point i am getting the above said error.
All the items i am trying to add is exisable and tax is also of cenvat type.
Please help me out of this as im stuch very badly in this issue.
Regards,
Sandesh.Sreyamsh

PCO 2.1 Error : there are multiple root elements Line 6, position 2

HI all,
I am getting an error while adding Destination for Notification.
On the Destination Tab, I am able to create MII System as Destination. And expanding the newly created Destination, i can see a child node 'Destination'. While clicking on this child node, i am getting an error as "there are multiple root elements Line 6, position 2"
Can anybody please help.
Regards
Muzammil

Hi,
While configuring MII Server details, instead of IP address of MII server, we gave domain name and it started working.
Regards
Muzammil

Depreciation error :There are no areas to post to in company code SN00

Hi,
When I am running depreciation (AFAB) for a main asset for a particular period, I am getting an error as "There are no areas to post to in company code SN00".
On further checking, the solution seems given is as follows" Using the Customizing functions, check whether the areas to be posted have been given a posting cycle in the company code specified."
Could not understand what does that mean.
Any inputs will be highly appreciated.
Thanks in Advance,
Dusmanta

Hi,
You have to define how depreciation area post to general ledger.
For this in SPRO, in Asset Accounting go to 'Integration with the General Ledger' and in to
'How Depreciation Area post to General Ledger'.
For your dereciation area, check whether 'Area Posts in Realtime' is selected.
regards,
Priya Rajesh.

Error: There are gaps in assignment of required role ZVLPP Vendor - Landlor

Hello everyone,
I did create a new BP role with vendor integration. I have done all the settings including the syncronization settings between the vendor and BP. Now when i want to edin an old contract i get error message:
There are gaps in assignment of required role ZVLPP Vendor - Landlord Companies
Message no. REBPBP011
Diagnosis
Either a business partner has not been assigned in role ZVLPP Vendor - Landlord Companies for the current object/contract or
A business partner is not assigned in this role at all times in which the object is valid (period 01.11.2008 - 31.10.2009).
However, the Customizing settings specify that role ZVLPP Vendor - Landlord Companies is mandatory for the current object/contract.
System Response
Depending on the object, you may be able to save the object despite the fact that there is no business partner. However you will not be able to activate the contract if you have not assigned a business partner.
Procedure
Assign a business partner in role ZVLPP Vendor - Landlord Companies for the entire period 01.11.2008 - 31.10.2009.
My problem is in the step where i make assignment of applications/objects to my business roles, I havent set any of the two roles as madatory for a RE contract.
I ve gone through all the steps for BP in Customizing and searched through all OSS notes and forums but didnt find anything on that problem.
Does anyone have an idea what the problem might be?
Any input would be appreciated
Thanks
Severina

Hi,
The message is not an error message. but for me it is just a warning message. Inspite of the warning, you can still save the contract.
However, you cannot activate the contract because, Customer / Vendor Business Partner are not attached to the Real estate contract. By default, you must assign a Business partner with Customer role / Vendor role to a contract. This is to ensure FI postings to Customers / Vendors.
So, choose a Business partner with vendor role and save the contract and activate it.
Cheers !!!
Siva

HP MediaSmart Playback Error "There are some problems trying to play the music file ..." Why?

The error message pops up for all WAV files. All the same files play fine with other software. What is wrong with the HP software?

gambl0r wrote:
Winston, you CAN sync without transferring the files to the Apple TV HDD.
That's not correct, although I now understand you.
Select Custom sync and choose not to transfer files.
As I say I realise what you are saying, but it is your library database file that is synced, your music is streamed.
It has worked in the past for me and it still works now, I can see all the albums on the Apple TV in 'My Music' only when I go to play a file: silence. Both on the television and on the stereo.
Have you by any chance turned the volume down on the tv.
And yes, there is a reason to disable sound output via HDMI, because there is no use to have two audio streams outputting at the same time.
Sorry I don't follow your reasoning here. We don't use the DVD player in the car, I haven't considered disabling it though.

Error: There are multiple join paths between these folders

I occasionally see this multiple join path error message when collapsing a field in a cross-tab report. The strange thing is that this error only occurs when collapsing on detail of the field, but does not happen when collapsing on the field title. For example, if the column is the department field, there is no error when collapsing on the department title at the top of the column. However, when collapsing on a single department (e.g. president_office) then the error occurs. The second odd thing, when reviewing the SQL there is only one join to the department table.
Does anyone have an explanation, solution, or a suggestion on how to debug this error? Sometimes I found that by rearranging the layout of the fields fixes the problem, but this is not an option in every report.
thanks

Since it's using the "Firstname lastname" to reference the user when I use add-distributiongroupmember, I suspect that referencing the smtp address would return different results.
Does Add-DistributionGroupMember reference AD objects, even if they don't have an associated mailbox? I ran into the same error when giving myself full permissions on a mailbox; I have only one Exchange object (a mailbox) but I have a second
AD object (user object with dom admin rights). I then went and found that the user I had trouble adding to the DG has an
AD object with no associated mailbox. (We frequently create AD users for business partners to access published remote applications.)
My suspicion is that Add-DistributionGroupMember references AD objects, and not just valid Exchange recipients. This would make sense if you're using security enabled groups and having them pull double duty - which we don't do at this company.
If my suspicion is correct, it should be documented on the technet article. http://technet.microsoft.com/en-us/library/aa995970(v=exchg.141).aspx

Empty Slideshow Error (there are no empty slideshows)

Hello All,
I am using iDVD 7.0.3 and I keep getting the following error message:
* There is an empty slideshow in your project. Make sure every slideshow contains at least one image, or delete any empty slideshow before burning this project.
when I attempt to burn my disc. I have checked and rechecked and checked again and all of my slideshows have images in them. Does anyone have any suggestions? Thanks!
_Kyle

I've got the same problem as well. From what I can guess, it looks like the iTunes application on the secondary Mac is streaming the photos, but stalls out in order to build a cache of thumbnails or appropriately sized images to send over to the AppleTV.
The AppleTV isn't expecting the connection to the Mac to take as long as it does to build the streaming image library and then pauses/timeouts while the library is being built.
I'm not sure if the library gets cached so the AppleTV doesn't pause during reconnections and reboots but if that is the issue, it would be nice if Apple updated iTunes to be able to keep the AppleTV streaming library cache current so the pause/timeout doesn't occur when everyone is gathered around the television.

Metastat error "there are no exsiting databases

Similar Messages

Maybe you are looking for