Method: CHECK of program CX_FQDN

please help me I have all the instructions according to this file but I got the problem I could not solve it any help from you, I will be happy.
my host file
# Copyright (c) 1993-2009 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
#      102.54.94.97    rhino.acme.com          # source server
#      38.25.63.10    x.acme.com              # x client host
127.0.0.1      localhost
10.0.2.15 ibo-pc.com
# localhost name resolution is handled within DNS itself.
# 127.0.0.1      localhost
# ::1            localhost
and I have used RZ10
please any suggestion, I will be happy, thank you very much ..
I have done all steps according to this file
Step_by_Step_Configuration_for_Running_Web_Dynpro_ABAP_in_SAP_NetWeaver_701_SR1_SP3_ABAP_Trial_Version
File-Upload.net - Step_by_Step_Configuration_for_Running_Web_Dynpro_ABAP_in_SAP_NetWeaver_701_SR1_SP3_ABAP_Trial_Version…

the solution is RZ10,
I have done .
my host name + domain
hostname + domain
ibo-pc.com
and in windows/system32/drivers/etc/ hosts
# Copyright (c) 1993-2009 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host
127.0.0.1       localhost
10.0.2.15       ibo-pc.com
# localhost name resolution is handled within DNS itself.
# 127.0.0.1       localhost
# ::1             localhost
thank you for all.

Similar Messages

F-58 check print program

Dear Exports,
Where we can assign program for check print for transaction F-58, or where we can see the program assignment for transaction F-58.,
Can we assign same print program for F-58 and F110?
regards
babu..

Hi Surendra,
You can assign the same program for both F-58 and F110
You assign the Check printing program in FBZP> Payment Methods in Country( Double click the country and payment Method combination and add Payment program in Payment medium Program at the bottom.
And you assign the forms for cheque also in FBZP>Paying Company Codes.
Regards,
SAPFICO

AP Payment Method (Check) & Remit-to Bank Info (Bank A/c and A/c Name) not populated automatically

Hello all,
We have encountered an issue during our testing for upgrade to R12 (12.1.3) where in the AP Invoice header, the remit-to bank a/c info (a/c number and name) as well as the payment method are not being picked for some sites in certain suppliers (even though the banking details and payment method have been maintained at supplier site level).
However, this is not the same for other sites maintained under the same suppliers for eg:
Supplier A has 2 sites
Site 1
Site 2
In the invoice, when giving Supplier A, Site 1, the remit-to details are not auto populated (but can be manually picked) - same with the payment method (Check)
If Supplier A, Site 2 is picked, all details populate automatically.
Also, this has been noted with suppliers that have been migrated from R11 however, not all migrated suppliers show this behavior.
Any advice is very much appreciated.
Thanks and Regards,
Fazleth

Changes in relation to Supplier Bank set up in R12 upgrade I worked on in 2010 so may not be 100% but here goes:-
R12 introduces a Priority flag in addition to the Primary flag in the Supplier Bank set up.
This functionality replaces the R11i use of the Primary flag in the current Supplier bank set up.
My understanding is that in the upgrade to R12 the Primary flag will be assigned as in R11i and the new priority flag will be assigned as per the logic of the R11i Primary flag.
In the example above it could be that for supplier site A site 2 was the primary flag and a priority has been given to site 2 if this is the case there may be some small set up that needs to happen to give site 1 a priority in R12.
I don't have the set up steps to hand but you should be able to run some reports and query in the supplier set up to validate this.

How to change font size in check printing program in AP Invoice

I would like to know how to change font size in check printing program in Oracle Payables Module for Invoice printing. We are using Oracle standard
report to print check.
Concurrent program short name : APXPBFEL
Prt file : APLASP.prt
I modified prt file for code 199 like below
code "199" esc "(8U" esc "(s0p12.00h10.00v0s0b3T" esc "&k11.75H"
Font size changed for last page only which prints checks, for Void pages its printed with default font. For Page 1 printed with default font and page 2 has reduced font. This change is not intiallized for all pages.
Please let me know if you any of you know how to change fonts.
Thanks,
Anand

*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

How to add a code TestIfElse(10) to the Main method of the Program.cs class?

How to add a code TestIfElse(10) to the Main method of the Program.cs class?
Here is my code and I have copied from the Wiley book for Microsoft certification page 14,
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace ifelse_Statement
class Program
static void Main(string[] args);
TestIfElse(10);
public static void TestIfElse(int n);
if(n < 10)
Console.WriteLine("n is less than 10");
else if(n < 20)
Console.WriteLine("n is less than 20");
else if(n < 30)
Console. WriteLine("n is greater than or equal to 30");
Here is the error list I am getting,
Error 1 Method must have a return type C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\switch_Statement\Program.cs
12 13
switch_Statement
Error 2
Type expected C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\switch_Statement\Program.cs
12 24
switch_Statement
Error 3
Method must have a return type C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
12 9
ifelse_Statement
Error 4
Type expected C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
12 20
ifelse_Statement
Error 5
Invalid token 'if' in class, struct, or interface member declaration
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
16 9
ifelse_Statement
Error 6
Invalid token '10' in class, struct, or interface member declaration
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
16 16
ifelse_Statement
Error 7
Type expected C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
16 16
ifelse_Statement
Error 8
Invalid token '(' in class, struct, or interface member declaration
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
18 35
ifelse_Statement
Error 9
A namespace cannot directly contain members such as fields or methods
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
20 10
ifelse_Statement
Error 10
Type or namespace definition, or end-of-file expected
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
30 1
ifelse_Statement
Error 11
The type or namespace name 'n' could not be found (are you missing a using directive or an assembly reference?)
c:\users\pvs\documents\visual studio 2013\projects\lesson01\ifelse_statement\program.cs
16 12
ifelse_Statement
Error 12
'System.Console.WriteLine(string, params object[])' is a 'method' but is used like a 'type'
c:\users\pvs\documents\visual studio 2013\projects\lesson01\ifelse_statement\program.cs
18 26
ifelse_Statement

static void Main(string[] args){
TestIfElse(10);
public static void TestIfElse(int n)
if (n < 10)
Console.WriteLine("n is less than 10");
else if (n < 20)
Console.WriteLine("n is less than 20");
else if (n < 30)
Console.WriteLine("n is greater than or equal to 30");
Fouad Roumieh

How to call a Method in a Program?

Hello,
I am very new to the ABAP world. I have been given a task to call a method if_hrbas_plain_infotype_access~read_single from the class CL_HRBAS_PLAIN_INFOTYPE_ACCESS in a program to see if we can use it to display some employee information. I don't know how to call a method in a program. Can somebody please provide me some pseudo code or instructions?
Thanks.

Hi Shan,
here is the code to call a method. while calling the method Instance as 'r_info' which is the type reference to class as specified.
pass the values to exporting parameters plvar,otype,objid...etc according to the requirement
infotypes: 0002.   " creates an internal table p0002.
data:
r_info type ref to CL_HRBAS_PLAIN_INFOTYPE_ACCESS.
TRY.
CALL METHOD r_info->if_hrbas_plain_infotype_access~read
   EXPORTING
     plvar           =
     otype           =
     objid           =
     istat           =
     infty           =
*     SUBTY           =
     begda           =
     endda           =
     no_auth_check   = 'X'
     message_handler =
   IMPORTING
     PNNNN_TAB       = P0002
*     HRTNNNN_TAB     =
*     IS_OK           =
CATCH CX_HRBAS_VIOLATED_ASSERTION .
ENDTRY.
LOOP AT P0002.
      WRITE:/
        P0002-VORNA,
        P0002-NCHMC,
        P0002-NACHN.
    ENDLOOP.
Regards

Warning messages from ME_PROCESS_REQ_CUST method CHECK

Hello All,
I am facing below mentioned issue with BADI ME_PROCESS_REQ_CUST
1: how can we issue warning messages from BADI ME_PROCESS_REQ_CUST method CHECK?
2: Check method is called twice if I click on check button in ME52N.
Thanks

HI ,
You can use Below
include mm_messages_mac. "useful macros for message handling
if ur condition   .
mmpur_message_forced 'W' 'ME' '083' text-001 '' '' ''.
endif.
text-001 : text element   for your description .
BUt Warning Message will not keep the screen on error page . it will be better to use   'E' for error   if you want
mmpur_message_forced 'E' 'ME' '083' text-001 '' '' ''.
regards
Deepak.
Edited by: Deepak Dhamat on Oct 21, 2011 8:20 AM

Method : RAISE_FOR of program CX_WDR_ADAPTER_EXCEPTION======CP

Hi
we have just done an EHP5 upgrade on ERP but we seem to getting an error on PPM that reads as below, if anyone had once experienced this please assist as to how your fixed it.
Error while processing your query
What has happened?
The URL call http://iprsap017.za.corp.implats.co.za:8000/sap/bc/webdynpro/rpm/ui_dashboard_item was terminated because of an error.
Note
The following error occurred in system RQ1 : An exception occurred that was not caught.
The error occurred on application server IPRSAP017_RQ1_00 and in work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE_FOR of program CX_WDR_ADAPTER_EXCEPTION======CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C0STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
What can I do?
If the termination type is RABAX_STATE, you will find more information on the cause of termination in system RQ1 in transaction ST22.
If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server IPRSAP017_RQ1_00 in transaction SM21.
If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 1 in transaction ST11 on the application server. IPRSAP017_RQ1_00 . You may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 400 -u: DUMAN -l: E -s: RQ1 -i: IPRSAP017_RQ1_00 -w: 1 -d: 20120208 -t: 132101 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: 00221990F27D1ED194C8DF3CAF63BF97_00221990F27D1ED194C8DF4422C1BF97_1 -x: F94652E17BE5F1239F9700221990F27D
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hello,
did you get this fixed? We are experiencing the same issue after just doing the EhP5 upgrade in our first system.
Thanks,
Ingrid Funken

HT1918 I have a new visa debit card, I have tryed several times to put in this new information into my IPad. The program keeps telling me. There's a billing problem with a previous purchase. Please update your payment method. The program will not let me u

I have a new visa debit card, I have tryed several times to put in this new information into my IPad. The program keeps telling me.
There's a billing problem with a previous purchase. Please update your payment method.
The program will not let me update, what am I doing wrong. rose165

I would love to have a phone number to call someone with apple on this issue.

How to call a standard BOR method in a program.

Hi All,
How to call a standard BOR method in a program. For example I have to call BOR method ISUSMORDER.Release in my program but don't know how to call.
Also, plz tell me how to capture the Exceptions in case of BOR method.
Plz help me out in this.
Thanks,
Mithilesh

Would be easier (however not always possible), to determine the functionality of this method and call that in your program. I mean, normally this method calls a BAPI, or function module (or a transaction). Have a look at the coding inside of the method, and try and use this.

Accessing the Par file or java methods in ABAP programming at ECC from EP

Hi experts,
Can we access par file or java methods in ABAP programming (ECC side)which are at Enterprise portal side .If it is possible please
let me know the procedure.Thanks for your help.
Thanks and Regards,
Venkat

Hi Das,
The mentioned wiki is for uploading the par file ,but my question is diffrent.This file or java method need to be used in ABAP side.
Thanks and Regards,
venkat

How to print Signature stored in a flash drive on to check print program?

Hi,
I have a check print program template and have the following requirement. I need to print the signature image which is stored in a flash drive that will be inserted in to the check printer (HP laserjet 4250 series). The vendor sent the escape sequence to activate the signatue image. I'm familiar with how to print images stored in $OA_MEDIA area but not in a flash drive.
Has anyone done this before? If you did, could you please let me know how and where to put the escape sequence the vendor sent on the .rtf document to activate the signature image while the check print program is run (Format Payment Instructions - in rel 12) ?
Message was edited by:
user586895

Hi,
This is an interesting problem, and not something I have considered before. I do not know of an exact solution, but as your printer is on a network, theoretically it will have an IP address. When your flash drive is inserted into the printer I would assume that is is treated like any other drive in a PC, so you would be able to use a URL to get to it.
Using a dummy image and a URL to the printer flash drive you should be able to pick up the image.
Not entirely sure if this would work, but it may be food for thought, and help you along the way.
Regards,
Cj

Include an authorization check in program

Hello,
I am new to SDN .
I got a requirement where i have to include an authorization check in programs this is required for all custom programs before they are added to roles . I am not sure what i have to do it .
These programs if i try to open in se38 , i cannot view them .
How do i include authorisation checks .
Please let me know step by step .
i will be grateful.
thanks
sumit
Edited by: sumit123 on Jan 20, 2010 9:52 AM

Hi Sumit,
http://help.sap.com/saphelp_nw04s/helpdata/en/52/67129f439b11d1896f0000e8322d00/content.htm
Check this link.
The following actions are authorization checks that are performed before the start of a program or table maintenance and which the SAP applications cannot avoid: .
1.Starting SAP transactions (authorization object S_TCODE)
2.Starting reports (authorization object S_PROGRAM)
3.Calling RFC function modules (authorization object S_RFC)
4.Table maintenance with generic tools (S_TABU_DIS)
Authority check is done to restrict the execution of a report to certain users.
Basis creates a authorisation group , includes certain roles in it, to which authorisation should be given.
If one's id has that role then he is authorised to execute the report..
IN the report the below code is written to do auth. check
Authority check on plant
AUTHORITY-CHECK OBJECT 'ZMMD_PROD'
ID 'WERKS' FIELD wf_werks.
Here authorisation is done on plant. and the authorisation object is ZMMD_PROD(to be created by BASIS)

How to debug the method in abap program

How to debug the method in abap program ?
Could you please give the solution.
Thanks
sai

Hi ,
Place break point at call method .
It takes u in to the method implementation .
Here u can analyse the method implementation ...
Reward if useful
Thanks
Jagadeesh.G

NET8의 LOCAL NAMING METHODS 이용관련 CHECK POINTS & TROUBLESHOOTING

제품 : SQL*NET
작성날짜 : 2000-12-15
===================================================================
Net8의 Local Naming Methods 이용관련 Check Points & Troubleshooting
====================================================================
Net8 관련 내용중 Local Naming Methods(sqlnet.ora와 tnsnames.ora
를 이용해서 DB에 Connect하는 방법)에 관한 일반적인 Check Points 및
Troubleshooing 사항을 정리해보도록 하겠다.
[Client Connection : Local Naming Methods]
1. Local Naming method resolves service names by using the local configuration files tnsnames.ora and sqlnet.ora.
2. One of the benefits of the Local Naming method is that it provides a simple method for resolving service name addresses. It is easy to configure local naming by using a GUI called the Net8 Assistant. When you configure a client machine for local naming by using the Net8 Assistant, a tnsnames.ora file is generated. To configure all the other client machines on the network that need to use the same database services, you can simply copy this file to the client machines.
3. Another benefit of using the local-naming method is that it resolves service name across networks running different protocols.
[Local Naming : Configuration]
1. The local-naming method resolves service names by using the information configured and stored on each individual client. Local naming is most appropriate for simple distributed networks with a small number of services that change infrequently.
2. Local naming requires the configuration of two local files, tnsnames.ora and sqlnet.ora. The tnsnames.ora file contains the address needed to direct a connection request to the specified listener on the specified node by using the specified database. The sqlnet.ora file stores information about the selected naming method.
3. Local naming is easy to configure by using the Net8 Assistant. The Net8 Assistant is implemented in Java and is packed with the Java Runtime Environment. You can run the Net8 Assistant on any platform on which Net8 is installed.
4. When you configure an Oracle8 server to use the local-naming method for service names resolution, the client-side configuration files tnsnames.ora and sqlnet.ora are automatically generated. After the configuration is complete, you copy these two files from the server to the client machines.
[Client Files : Parameters]
1. The tnsnames.ora and sqlnet.ora files are generated at the default location ORACLE_HOME\net80\admin.
2. The first parameter in the tnsnames.ora file specifies the service name and the domain name for the client.
3. The tnsnames.ora file contains a parameter called DESCRIPTION. This parameter contains information about the connect descriptor for the client.
4. The ADDRESS parameter in the tnsnames.ora file specifies the network address of the host to which the client is connected. If multiple addresses are specified, use the keyword ADDRESS_LIST before the ADDRESS parameter.
5. Another parameter in the tnsnames.ora file is the CONNECT_DATA parameter. This parameter specifies the SID of the database to which the client is connected.
6. The DEFAULT_DOMAIN parameter of the sqlnet.ora file specifies the domain from which the client most often requests names. When this parameter is set, the domain name is automatically appended to the service name in a connect string.
7. The DIRECTORY_PATH parameter is another key parameter of the sqlnet.ora file. This parameter specifies the names resolution method to be used for the client-server connection.
8. The sqlnet.ora file also contains a parameter called DEFAULT_ZONE.
This parameter specifies the region to which the client belongs.
[Troubleshooting the Client Side]
These are common client-side problems and the error messages associated with
each error code.
ORA-12154: "TNS: could not resolve service name"
ORA-12198: "TNS: could not find path to destination"
ORA-12203: "TNS: unable to connect to destination"
ORA-12533: "TNS: illegal ADDRESS parameters"
1. The ORA-12154 error occurs when Net8 cannot locate the connect descriptor specified in the tnsnames.ora configuration file. To solve this problem, first verify that a tnsnames.ora file exists and is accessible. Next, verify that multiple copies of the tnsnames.ora file are not present. After checking the existence of the tnsnames.ora file, verify that the service name specified in the connect string is mapped to a connect descriptor in the tnsnames.ora file. Verify also that the file does not contain any syntaz errors. The ORA-12154 error also occur if there is more than one copy of the sqlnet.ora file. Verify that duplicate copies of the sqlnet.ora file are not present.
2. The ORA-12198 and ORA-12203 errors occur when the client is unable to find the required database. To solve this problem, first verify that you have correctly entered the service name that you want to use. Next verify that the service name parameters in the ADDRESS section of the connect descriptor in the tnsnames.ora file are correctly defined. Then, verify that the tnsnames.ora file is stored in the correct directory. The ORA-12198 and ORA-12203 errors can also occur if the listener on the remote node is not running. Verify that the listener on the remote node has started and is running. If the listener is not running, start the listener by using the Listener Control(LSNRCTL) utility.
3. The ORA-12533 error occurs if the protocol-specific parameters in the ADDRESS section of the designated connect descriptor in the tnsnames.ora file are incorrect. To solve this problem, use the correct protocol-specific parameters in the ADDRESS section of the connect descriptor.
4. The ORA-12545 error occurs when the listener on the remote node cannot be contacted. This may happen if the values of the ADDRESS parameter in the tnsnames.ora file and the listener.ora file are incorrect. In this case replace the incorrect values with the correct values in both the files. The ORA-12545 error can also occur if the listener on the remote node is not
started. To verify whether or not the listener is started, determine its status with the STATUS command of the LSNRCTL utility. If necessary, start the listener on the remote node with the START command.

제품 : SQL*NET
작성날짜 : 2000-12-15
===================================================================
Net8의 Local Naming Methods 이용관련 Check Points & Troubleshooting
====================================================================
Net8 관련 내용중 Local Naming Methods(sqlnet.ora와 tnsnames.ora
를 이용해서 DB에 Connect하는 방법)에 관한 일반적인 Check Points 및
Troubleshooing 사항을 정리해보도록 하겠다.
[Client Connection : Local Naming Methods]
1. Local Naming method resolves service names by using the local configuration files tnsnames.ora and sqlnet.ora.
2. One of the benefits of the Local Naming method is that it provides a simple method for resolving service name addresses. It is easy to configure local naming by using a GUI called the Net8 Assistant. When you configure a client machine for local naming by using the Net8 Assistant, a tnsnames.ora file is generated. To configure all the other client machines on the network that need to use the same database services, you can simply copy this file to the client machines.
3. Another benefit of using the local-naming method is that it resolves service name across networks running different protocols.
[Local Naming : Configuration]
1. The local-naming method resolves service names by using the information configured and stored on each individual client. Local naming is most appropriate for simple distributed networks with a small number of services that change infrequently.
2. Local naming requires the configuration of two local files, tnsnames.ora and sqlnet.ora. The tnsnames.ora file contains the address needed to direct a connection request to the specified listener on the specified node by using the specified database. The sqlnet.ora file stores information about the selected naming method.
3. Local naming is easy to configure by using the Net8 Assistant. The Net8 Assistant is implemented in Java and is packed with the Java Runtime Environment. You can run the Net8 Assistant on any platform on which Net8 is installed.
4. When you configure an Oracle8 server to use the local-naming method for service names resolution, the client-side configuration files tnsnames.ora and sqlnet.ora are automatically generated. After the configuration is complete, you copy these two files from the server to the client machines.
[Client Files : Parameters]
1. The tnsnames.ora and sqlnet.ora files are generated at the default location ORACLE_HOME\net80\admin.
2. The first parameter in the tnsnames.ora file specifies the service name and the domain name for the client.
3. The tnsnames.ora file contains a parameter called DESCRIPTION. This parameter contains information about the connect descriptor for the client.
4. The ADDRESS parameter in the tnsnames.ora file specifies the network address of the host to which the client is connected. If multiple addresses are specified, use the keyword ADDRESS_LIST before the ADDRESS parameter.
5. Another parameter in the tnsnames.ora file is the CONNECT_DATA parameter. This parameter specifies the SID of the database to which the client is connected.
6. The DEFAULT_DOMAIN parameter of the sqlnet.ora file specifies the domain from which the client most often requests names. When this parameter is set, the domain name is automatically appended to the service name in a connect string.
7. The DIRECTORY_PATH parameter is another key parameter of the sqlnet.ora file. This parameter specifies the names resolution method to be used for the client-server connection.
8. The sqlnet.ora file also contains a parameter called DEFAULT_ZONE.
This parameter specifies the region to which the client belongs.
[Troubleshooting the Client Side]
These are common client-side problems and the error messages associated with
each error code.
ORA-12154: "TNS: could not resolve service name"
ORA-12198: "TNS: could not find path to destination"
ORA-12203: "TNS: unable to connect to destination"
ORA-12533: "TNS: illegal ADDRESS parameters"
1. The ORA-12154 error occurs when Net8 cannot locate the connect descriptor specified in the tnsnames.ora configuration file. To solve this problem, first verify that a tnsnames.ora file exists and is accessible. Next, verify that multiple copies of the tnsnames.ora file are not present. After checking the existence of the tnsnames.ora file, verify that the service name specified in the connect string is mapped to a connect descriptor in the tnsnames.ora file. Verify also that the file does not contain any syntaz errors. The ORA-12154 error also occur if there is more than one copy of the sqlnet.ora file. Verify that duplicate copies of the sqlnet.ora file are not present.
2. The ORA-12198 and ORA-12203 errors occur when the client is unable to find the required database. To solve this problem, first verify that you have correctly entered the service name that you want to use. Next verify that the service name parameters in the ADDRESS section of the connect descriptor in the tnsnames.ora file are correctly defined. Then, verify that the tnsnames.ora file is stored in the correct directory. The ORA-12198 and ORA-12203 errors can also occur if the listener on the remote node is not running. Verify that the listener on the remote node has started and is running. If the listener is not running, start the listener by using the Listener Control(LSNRCTL) utility.
3. The ORA-12533 error occurs if the protocol-specific parameters in the ADDRESS section of the designated connect descriptor in the tnsnames.ora file are incorrect. To solve this problem, use the correct protocol-specific parameters in the ADDRESS section of the connect descriptor.
4. The ORA-12545 error occurs when the listener on the remote node cannot be contacted. This may happen if the values of the ADDRESS parameter in the tnsnames.ora file and the listener.ora file are incorrect. In this case replace the incorrect values with the correct values in both the files. The ORA-12545 error can also occur if the listener on the remote node is not
started. To verify whether or not the listener is started, determine its status with the STATUS command of the LSNRCTL utility. If necessary, start the listener on the remote node with the START command.

Method: CHECK of program CX_FQDN

Similar Messages

Maybe you are looking for