Metronome not in sync with start of recording

When I try to use the metronome count in for recording, the beat that is supposed to be at the start of the song comes too soon and my audio gets part of the first note chopped off. I've had it work right before and can't figure out how it's getting screwed up, what's up with this?

Turned on Plug-in Latency Compensation to "All" and now it works perfect

Similar Messages

Flashvideo stuttering, sound not in sync with video

Can't help it: flashvideos are stuttering and the sound is not in sync with the video as the video/picture always is like a second late to the sound.
Tried Firefox, Safari, Google Chrome, even with older flashplayer-versions than 11.5.502.110 as it is now, cleared chache, enabled and disabled hardware acceleration, tested different cache memory size (flashplayer internal settings), with or without camera and microphone allowance, every time I get the same results in a choppy / stuttering video and no sync in picture / sound.
My System is as followed:
MacBook Pro early 2008
MacBookPro4,1
Intel Core 2 Duo
2,5 GHz
L2-Cache:    6 MB
RAM:    4 GB
Bus:    800 MHz
with a GeForce 8600M GT
PCIe-Bus
VRAM 512 MB
Internet-connection via cable at least with 5 Mbit/sec up to mostly around 20 Mbit/sec and a 802.11n WLAN (tried LAN cable too, same effect)
My OSX is Snow Leopard 10.6.8 and I want to stick with that one, I keep the browsers and the flashplugin always up to date and I am not using a lot of background programs when watching, just one firewall and the usual system processes as I can see in the activity monitor, not much of percentage in processor usage, maybe 2 to 5 in percent all together, talking only of the background usage.
The core / processor usage, when a flashmovie is running, is around 80 to 90 percent,
there is an amount of 45 or so GB harddrive space empty and
somewhat of 1,8 GB of RAM not in use.
The connection-quality as shown in, say the "nfl game pass" window is very good up to max.
Sometimes, when the internet isn't that fast and the connection drops, the picture gets worse and the sound too, but that occurs not very often, maybe once a day and mostly when starting a video. After 10 seconds or so the quality of the picture and sound is high like brilliant HD, cannot complain about that, but the stuttering and out of sync sound remains.
I watch the flash videos at internal mac-book-pro monitor 1440x900 fullscreen, sometimes not fullscreen,
tried an external LCD Sony Bravia Full HD Monitor via DVI to HDMI adapter too
and I am getting always, with any kind of configuration, the same results in stuttering video with sound out of sync.
Did already read faq's and forums and it seems that this is an issue for a long time with very different computer-setups and browsers in various versions of the flash-player. Couldn't find anything in accordance, like same graphic cards or same internetconnections, browsers or else, yet, so it comes down to the flash player.
The issue with the stuttering video and no sync in sound and video occurs at any time of the day with different streams, live, archived - I also tried changing the mac-system-flashplayer settings in different combinations with no change at all: stuttering video, no sync sound.
If there is any information else that you need, please let me know,
I hope you can help as this stuttering and async is getting quite annoying by now...
greez anyway, out of vienna, austria
thanx,
manfred

Hi Manfred,
When you have the high cpu, is hardware acceleration enabled? You mentioned this occurs with all releases that you've tested, does this include 10.3 on Firefox?
Chris

TS4118 Ever since I got the iphone 5 my phone/icloud calender and contacts will not remain synced with Outlook. I am constantly having to sign in and sign out and unlink and re link to Outlook.

Ever since I got the iphone 5 my phone/icloud calender and contacts will not remain synced with Outlook. I am constantly having to sign in and sign out and unlink and re link to Outlook. this creates multiple categories of contacts and calenders and I have no idea which is syncing with my phone, ipad, outlook. Help. thanks.

Sounds like the Outlook plugin isn't working properly. You could try a couple of things:
Go to Start>Control Panel>Add/Remove Programs, uninstall iCloud, the download and install the iCloud contol panel for Windows again from here: http://support.apple.com/kb/DL1455. Then sign back into your iCloud account and check your syncing settings again.
Uninstall iTunes and all of its components as by following this guide exactly: Windows XP or Windows Vista/7, then reinstall iTunes. You must follow this guide exactly or it will not be successful. (Uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.) This will replace the Outlook plugin.
Then try your calendar again and see if it will sync properly now.

Dataguard configured using RMAN not in sync with Primary

Hi All.
I have configured physical standby using RMAN it has errored out as below message since the Physical standby is came in Mount state and it is not in sync with Primary.
$ rman target sys/oracle1@PROD_st_STBY auxiliary /
Recovery Manager: Release 11.2.0.1.0 - Production on Sun Jul 29 13:27:02 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: PROD_ST (DBID=609107922)
connected to auxiliary database: PROD_ST (not mounted)
RMAN> duplicate target database for standby dorecover;
Starting Duplicate Db at 29-JUL-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=156 device type=DISK
contents of Memory Script:
set until scn 239665;
restore clone standby controlfile;
executing Memory Script
executing command: SET until clause
Starting restore at 29-JUL-12
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /oracle1/oraerp/PROD_st/rman/07ngg1p6_1_1
channel ORA_AUX_DISK_1: piece handle=/oracle1/oraerp/PROD_st/rman/07ngg1p6_1_1 tag=TAG20120719T140110
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
output file name=/oracle1/oraerp/PROD_st/cont_.ctl
Finished restore at 29-JUL-12
contents of Memory Script:
sql clone 'alter database mount standby database';
executing Memory Script
sql statement: alter database mount standby database
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/29/2012 13:27:29
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary file name /oracle1/oraerp/PROD_st/undotbs1.dbf conflicts with a file used by the target database
RMAN-05001: auxiliary file name /oracle1/oraerp/PROD_st/sysaux.dbf conflicts with a file used by the target database
RMAN-05001: auxiliary file name /oracle1/oraerp/PROD_st/system01.dbf conflicts with a file used by the target database
RMAN>
SQL> select name,open_mode from v$database;
NAME OPEN_MODE
PROD_ST MOUNTED
SQL> select name,db_unique_name,database_role from v$database;
NAME DB_UNIQUE_NAME DATABASE_ROLE
PROD_ST PROD_st_STBY PHYSICAL STANDBY
SQL>
SQL> alter database recover managed standby database disconnect;
Database altered.
SQL>
SQL> alter system set log_archive_dest_state_2=enable;
System altered.
SQL> sho parameter log_archive_dest_2
NAME TYPE VALUE
log_archive_dest_2 string LOCATION=/oracle1/oraerp/PROD_
st/arch/ VALID_FOR=(ALL_LOGFIL
ES,ALL_ROLES)
On Primary
==========
SQL> SELECT THREAD# "Thread",SEQUENCE# "Last Sequence Generated"
FROM V$ARCHIVED_LOG
WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)
ORDER BY 1; 2 3 4
Thread Last Sequence Generated
1 281
ON STANDBY
SQL> SELECT ARCH.THREAD# "Thread", ARCH.SEQUENCE# "Last Sequence Received", APPL.SEQUENCE# "Last Sequence Applied", (ARCH.SEQUENCE# - APPL.SEQUENCE#) "Difference"
2 FROM
3 (SELECT THREAD# ,SEQUENCE# FROM V$ARCHIVED_LOG WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)) ARCH,
4 (SELECT THREAD# ,SEQUENCE# FROM V$LOG_HISTORY WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$LOG_HISTORY GROUP BY THREAD#)) APPL
5 WHERE
6 ARCH.THREAD# = APPL.THREAD#
ORDER BY 1; 7
no rows selected
SQL>
SQL> SELECT THREAD#, LOW_SEQUENCE#, HIGH_SEQUENCE# FROM V$ARCHIVE_GAP;
no rows selected
SQL>
Please suggest solution.
Best Regards,
Edited by: user13707876 on 19-Jul-2012 02:04

Hi,
It has worked now since error with warnings encountered as below:
$ rman target sys/oracle1@PROD_st_STBY auxiliary /
Recovery Manager: Release 11.2.0.1.0 - Production on Sun Jul 29 15:57:39 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: PROD_ST (DBID=609107922)
connected to auxiliary database: PROD_ST (not mounted)
RMAN> duplicate target database for standby nofilenamecheck;
Starting Duplicate Db at 29-JUL-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=156 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 29-JUL-12
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /oracle1/oraerp/PROD_st/rman/0enggc17_1_1
channel ORA_AUX_DISK_1: piece handle=/oracle1/oraerp/PROD_st/rman/0enggc17_1_1 tag=TAG20120719T165607
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
output file name=/oracle1/oraerp/PROD_st/cont_.ctl
Finished restore at 29-JUL-12
contents of Memory Script:
sql clone 'alter database mount standby database';
executing Memory Script
sql statement: alter database mount standby database
contents of Memory Script:
set newname for tempfile 1 to
"/oracle1/oraerp/PROD_st/temp01.dbf";
switch clone tempfile all;
set newname for datafile 1 to
"/oracle1/oraerp/PROD_st/system01.dbf";
set newname for datafile 2 to
"/oracle1/oraerp/PROD_st/sysaux.dbf";
set newname for datafile 3 to
"/oracle1/oraerp/PROD_st/undotbs1.dbf";
set newname for datafile 4 to
"/oracle1/oraerp/PROD_st/users01.dbf";
restore
clone database
executing Memory Script
executing command: SET NEWNAME
renamed tempfile 1 to /oracle1/oraerp/PROD_st/temp01.dbf in control file
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 29-JUL-12
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_AUX_DISK_1: restoring datafile 00001 to /oracle1/oraerp/PROD_st/system01.dbf
channel ORA_AUX_DISK_1: restoring datafile 00004 to /oracle1/oraerp/PROD_st/users01.dbf
channel ORA_AUX_DISK_1: reading from backup piece /oracle1/oraerp/PROD_st/rman/09nggc0j_1_1
channel ORA_AUX_DISK_1: piece handle=/oracle1/oraerp/PROD_st/rman/09nggc0j_1_1 tag=TAG20120719T165547
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:03
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_AUX_DISK_1: restoring datafile 00002 to /oracle1/oraerp/PROD_st/sysaux.dbf
channel ORA_AUX_DISK_1: restoring datafile 00003 to /oracle1/oraerp/PROD_st/undotbs1.dbf
channel ORA_AUX_DISK_1: reading from backup piece /oracle1/oraerp/PROD_st/rman/08nggc0j_1_1
channel ORA_AUX_DISK_1: piece handle=/oracle1/oraerp/PROD_st/rman/08nggc0j_1_1 tag=TAG20120719T165547
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:03
Finished restore at 29-JUL-12
contents of Memory Script:
switch clone datafile all;
executing Memory Script
datafile 1 switched to datafile copy
input datafile copy RECID=1 STAMP=789926299 file name=/oracle1/oraerp/PROD_st/system01.dbf
datafile 2 switched to datafile copy
input datafile copy RECID=2 STAMP=789926299 file name=/oracle1/oraerp/PROD_st/sysaux.dbf
datafile 3 switched to datafile copy
input datafile copy RECID=3 STAMP=789926299 file name=/oracle1/oraerp/PROD_st/undotbs1.dbf
datafile 4 switched to datafile copy
input datafile copy RECID=4 STAMP=789926299 file name=/oracle1/oraerp/PROD_st/users01.dbf
ORACLE error from auxiliary database: ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 1 thread 1: '/oracle1/oraerp/PROD_st/redo.log'
RMAN-05535: WARNING: All redo log files were not defined properly.
ORACLE error from auxiliary database: ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 2 thread 1: '/oracle1/oraerp/PROD_st/redo_2.log'
RMAN-05535: WARNING: All redo log files were not defined properly.
ORACLE error from auxiliary database: ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 5 thread 0: '/oracle1/oraerp/PROD_st/log5.log'
RMAN-05535: WARNING: All redo log files were not defined properly.
ORACLE error from auxiliary database: ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 6 thread 0: '/oracle1/oraerp/PROD_st/log6.log'
RMAN-05535: WARNING: All redo log files were not defined properly.
Finished Duplicate Db at 29-JUL-12
RMAN>
So please suggest can i rename them all redolog file.
Best Regards,

IPhone 4 can not wifi sync with my 2011 new MacBook Air

My iPhone 4 can not wifi sync with my 2011 MacBook Air.
My iTunes is 10.5.1, I'm using OS X 10.7.2 and my iPhone 4 is iOS 5.0.1
Does anyone know how to slove this?
Please let me know, thanks a lot~
Gavin

Having the same issue. Iphone 4 at 5.0.1, Itunes at 10.5.1 iMac at 10.7.2. Synch session fails to start either wi fi or USB connected. Don't know if it is related, but since turning on Match the Music app crashes on the iPhone. No problems on iPad 1, though

Track automation not in sync with playback

As of today any track automation that I manipulate is out of sync with the track by a beat. So if I adjust low frequency cut to jump from 20Hz to 1kHz at measure 64 1 1 1, when I playback it will make that adjustment at measure 63 4 1 1 instead, despite me looking at the line that's jumped from 20Hz to 1kHz on 64 1 1 1. Am I going crazy?
This doesn't happen to any PREVIOUS track automation, but only new track automation. And it's always a beat early compared to what I assign to it. Also, this is not specific to a certain project, but happens to every project. In other words, I can't make any music really past notes and beat assignments.
Does anyone have any idea what this means?
I don't know if this helps, but here's the current configurations on the Automation menu:
Move automation with regions: never
snap offset: -5 ticks
ramp time: 200 ms
'Write' mode changes to: Touch
Write automatino for (everything is checked off except "solo")
Automation Quick Assic: [X] off

Hi,
Have you add plugins like Adaptive limiter and/or phase linear Eq on Master Out 1-2?
If you add plugin that require Delay conpensation on the Master 1-2.
Also the meter will be delayed...... try to add 5 or more instances of Adaptive Limiter on the master after automation is done...
Maybe this should be related with Graphic delay that is not f compensate in logic 8, I'm not sure but when I add Plugins such as UAD for mastering reason I can see very large difference (not in sync with audio monitoring) on Meters viewing and all pre-recorded automation will be not in sync.
But I'm not sure if this issue is related with only certain project... maybe you have plugin that add latency on Aux or Master out in those projects!
check it.
Thanks
G
g

Business partner creation - Not in sync with customer numbers -

Hi All
I am trying to do the BP conversion in collections management.
The customer number range for account group ZXXX is (80000 to 89999) and the external number range flag is not selected.
I have created created a number range Y2 through BUCF, with numbers from (80000 to 89999), I did not choose external flag, thinking it should be same as customer number range. I have created a BP group ZXXX and assigned this number range Y2.
Later when I did the BP conversion through MDS_LOAD_COCKPIT, I observed that the BPs are not in sync with the customer numbers.
So my question, should I have choosen external number range flag in BUCF, even though its not selected in the customer number range? Has this caused the issue?
Please help me understand this and rectify this issue.
thanks in advance.
Krishna

Hi Christobal,
Thank you so much for you response.
As suggested, I have checked BP number range as external. Later when I ran MDS_LOAD_COCKPIT, I get the below messages
Grouping ZXXX has external number assignment, enter a number
Partner data processed with key PartnerGUID 4E1BD7375F080AE0E10080000A5B030E
Grouping ZXXX has external number assignment, enter a number
So is there any other setting which I might be missing?
Please advise.
Thanks
Krishna

I am using windows 7 and itunes 11.7 my i phone 5s is not getting synced with my laptop it keeps showing backing up please help i need to put music in my phone?

i am using windows 7 and itunes 11.7 my i phone 5s is not getting synced with my laptop it keeps showing backing up please help i need to put music ?

Hi,
Have you managed to solve this problem? if yes, please highlight how you solved it...i'm facing same problem with my new Iphone 5S but udner Windows, thanks.

Have tried to install icloud 4.0 for windows and again it does not allow syncing with outlook 2013 calendar and contact using windows 8.1 and IOS 8.02 (unexpected error)? I thought itunes 12.0 and icloud 4.0 would solve issue but still same result.

I have tried to install icloud 4.0 for windows and again is does not allow syncing with outlook 2013 calendar and contact, using windows 8.1 and IOS 8.02 (get - unexpected error)?

Having same issues. had been syncing every few days with outlook 2007 contacts and calendar but since updated to 4.0.2 and latest itunes I get an error that it is unable to sync. I can't seem to find any solution.

Audio not in sync with video in imovie 08 version 7.1.1

I am importing many Hi 8 tapes using a Sony video walkman GV-D800 thru a firewire 400 port on my Macbook pro, when I play it back in imovie the audio/voice is not in sync with the lip movement of the people in the video, there is a 1-3 second delay. If I play back the same video I captured using QuickTime Player there are no sync problems? I am new at this so what am I doing wrong?
BTW. I also imported HDV using my HDV camera and there are no sync problems at all. Any suggestions are appreciated.

Welcome to the  Discussion Forums.
Is this delay present on your exports or is it merely when previewing in imovie.

After ATV2 5.0 update Netflix audio is not in sync with video

As the title says, on ATV2 after the 5.0 update, Netflix audio is not in sync with video.
Anyone else seeing this?

I spoke tooo soon.
Netflix audio is not in sync with video today as well. Any movie, it happens to all.

Nokia 6131 video not in sync with sound

After a year of working just fine, my Nokia 6131 video picture is not in sync with the sound when I play it back on the phone or when I download it to my pc to view.
At first the problem was only when I played it back on the phone, but was fine on the pc. Now it's distorted on both.
The video picture seems to be on fast forward but the sound runs smoothly. My video's are always less than five mins long.
Please can anyone help me to resolve this frustrating problem?
Katie Girl
Solved!
Go to Solution.

hey KatieGirl, i too had the same problem with my old nokia 6288. have you tried turning off your phone and restarting it, this usually helps in alleviating choppy video playback. if this is still resulting in **bleep** playback on your phone and pc, then i would suggest searching for a software update via Nokia Software Updater, if there is no update, then i would suggest re-flashing your phone with the same version firmware again. p.s. remember to backup all your data before flashing your phone with firmware.
failing all this, then i would suggest taking your phone to your nearest Nokia Care Centre or authorised service repair centre, as there may be a fault with your phone hardware itself.
hope this helps.

Audio Skimming not in sync with actual Audio

Hi Guys,
Since about a week or so, my Audio Skimming seems a little off. When turned on, and actually skimming, it let's me hear something that's at least 4 seconds off. I have no idea how to fix this, so all help is needed
Thank you so much,
Nikkie

I spoke tooo soon.
Netflix audio is not in sync with video today as well. Any movie, it happens to all.

Audio SFX not in sync with input string playback

The audio 'key clicking' sound that occurs during playback as an input string is animated on the screen is not in sync with the characters... Its about .5 seconds late.
Is there a way to adjust this?
Thanks,
Peter

While the posted solution to my sync issue could very well correct my problem, the poster presumes I am computer literate, which I am not. lol
could the solution provider please explain the solution as is it were being given to a 6 year old? Although most 6 year old's are possibly more computer literate than I. lol
Thank you for your time.
I will be checking back for any response.

Model session not in sync with Http Session

Hi All,
I have an application developed in JDev 11.1.1.4 and we are not using ADF Security for login.
The problem occurring is randomly some of the LOV on my home page are getting null (having no data). These LOVs are populated using the values passed as bind parameter from the login values (basically HTTP session values at web layer). So i added a method in all the task flow to set the session value at the model layer (default method) . Also on each call to the Am Impl call i am setting the value in the HTTP session and then invoking the method, but some how what happens is the Model level session value is not in sync with HTTP session and the list gets empty.
Any inputs what i can do to get out of this prblm ?
thnk

In this case you need to overwrite the activateState/passivateState method of your am and store/reads the values from the xml structure you get as parameters to this methods.
For more detailed information check the docs http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcstatemgmt.htm#sm0495
By the way, this is nothing you need to open an SR on as it's working as designed.
Timo

Metronome not in sync with start of recording

Similar Messages

Maybe you are looking for