MF50 - ManualPlanned order with Basic Dates

Hi,
I am trying to create some manual planned using transaction MF50. In the initial screen selection option i am selecting basic dates and after that am entering some quantity in the production version column. After that i can able to see the firmed planned in MD04.
My question is in that firmed planned order its not considering the in house production time which is maintained in the material master. It is giving the same date as start date and finish date.
Can any one help me out in this issue?
Thanks in advance.
Regards,
Vijay.

Dear
Basic dates in planned orders is calculated from requirement date minus GR Processing time = Order finish date.
Order finish date minus inhouse production time from material master to calculate the order start date and then the order start date minu the opening period gives you the planned opening date.
Now based on thsi fact , it will be adjsued based on the Scheduling Parameters set up in OPU5 -Adjust Scheduling Date should be Adjust Basic Dates , Adjust dependent requirement to operation dates.
Unfirm the Planned order in MD11 or MD04-Select Planned Order -Change Mode -Uncheked firm indicator and SAVE and re-run MRP -MD02-NETCH , 2,1,3,3
While running MRP select Scheduling Indicator -2
What is your MRP type ?? Did you maintain any Planning Time Fence ?? in MRP1 views.
Regards
JH

Similar Messages

Find Sales Order Item Basic Data by Elements query fails

I am trying to consume Find Sales Order Item Basic Data by Elements in .NET 3.0.
Every thing appears to be working fine -- I could query by PO number, Creation time, SalesOrganisationID etc.
However, the most basic query is mysteriously failing. I just want to query by Sales order number, and have given a valid sales order number 6718 that exists in SAP.
It fails giving the following errors:
(in Log.LogItem.Note variable):
"Conversion failed: Invalid input format"
(in Log.LogItem.TypeID variable):
"701(SFB)"
Code is pretty simple, and I am just trying to query Saler Order number 6718. Of course there is nothing wrong with its format.
From the ESOA site, all I could get was:
----
QUOTE -
The following values are optional selection criteria for restricting the search result:
SelectionByID Document number range
INCLUSION_EXCLUSION_CODE
INTERVAL_BOUNDARY_TYPE_CODE
LOWER_BOUNDARY_ID
Value
UPPER_BOUNDARY_ID Value
Value
UNQUOTE -

I could not even have any documentation on what to put in InclusionExclusionCode, and IntervalBoundaryTypeCode. They apper to be some Global Data Types for which I couldn't find any documentation. By sifting through Wiki, I just guessed a couple of values praying that it may work. I am a bit new to ESOA, but have expertise in .NET 3.0. Would someone guide me where to find the documentation for that, where are the error codes listed, so that I make the queries with little better preparation.
 querydata.SelectionByID = new SalesOrderERPItemBasicDataByElementsQueryMessage_syncSalesOrderERPItemBasicDataSelectionByElementsSelectionByID[1];//Single element array is good enough
 querydata.SelectionByID[0] = new SalesOrderERPItemBasicDataByElementsQueryMessage_syncSalesOrderERPItemBasicDataSelectionByElementsSelectionByID();
 querydata.SelectionByID[0].InclusionExclusionCode = "E";
 querydata.SelectionByID[0].IntervalBoundaryTypeCode = "6";
 querydata.SelectionByID[0].LowerBoundaryID = new SalesOrderID();
 querydata.SelectionByID[0].LowerBoundaryID.Value = "6718";
 querydata.SelectionByID[0].UpperBoundaryID = new SalesOrderID();
 querydata.SelectionByID[0].UpperBoundaryID.Value = "6718";

How do you test with a SOAP Client - I am trying to use same dataset as provided?
I did with WSDL Test - SAP, SOAP Client and got the following error:
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
 <soap-env:Body>
 <nr1:SalesOrderERPBasicDataByElementsResponse_sync xmlns:nr1="http://sap.com/xi/APPL/Global2">
 <Log>
 <MaximumLogItemSeverityCode>1</MaximumLogItemSeverityCode>
 <Item>
 <TypeID>701(SFB)</TypeID>
 <SeverityCode>1</SeverityCode>
 <Note>Conversion failed: Invalid input format</Note>
 </Item>
 <Item>
 <TypeID>701(SFB)</TypeID>
 <SeverityCode>1</SeverityCode>
 <Note>Conversion failed: Invalid input format</Note>
 </Item>
 <Item>
 <TypeID>701(SFB)</TypeID>
 <SeverityCode>1</SeverityCode>
 <Note>Conversion failed: Invalid input format</Note>
 </Item>
 <Item>
 <TypeID>701(SFB)</TypeID>
 <SeverityCode>1</SeverityCode>
 <Note>Conversion failed: Invalid input format</Note>
 </Item>
 <Item>
 <TypeID>701(SFB)</TypeID>
 <SeverityCode>1</SeverityCode>
 <Note>Conversion failed: Invalid input format</Note>
 </Item>
 </Log>
 </nr1:SalesOrderERPBasicDataByElementsResponse_sync>
 </soap-env:Body>
</soap-env:Envelope>
Thanks..
Vikas

Load a sales order with delivery date in the past

Hi,
We want to load in the system a sales order with delivery date in the past, and maintain the schedule delivery date in the past. To do that, in the customizing Sales And Distribution / Basic Functions / Delivery Scheduling and Transportation Scheduling / Define Scheduling By Sales Document Type, I selected the flag Blackwards. But the problem is that the rest of the dates in the scredule line: goods issue date, loading date, material avail.date and transportation Plan Date, are in blank and you cannot enter any data because the system deletes it.
How can I have these dates informed with dates in the past?
Thanks in advance,

You can control this using the "Message Control" in the SAP IMG.
Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Message Control>Influence Message Control
Using this you convert Error to Warning or even swith off this message.
Please refer this thread for complete steps:
Re: How to change an error message to a warning message in SRM
Note: you need to suppress the messages relevant to your case here.
Regards
Kathirvel

Order with delivery date always on perticular day

Hi,
My clients requirement is
orders should always be ordered with delivery date Tuesdays for one sales organisation say X.
planning calender wont work here because in order confirmed delivery date calculate with many criteria taking into
consideration.
then How to customize user's this perticular requirement?
regards,
Anup

Hi anup12
Go to T.Code VOV8 & select your Sales document type.In Requested delivery date mention the Lead time in days as 1 & save it
--Raise sales order in VA01 & enter the material & check the requested delivery date.
Let me know if your problem is solved
Regards
Pradeep

Creation of service order with address data.

Hello community,
I have the following requirement: create maintenance orders with order address data, the creation of these orders will be triggered by an interface with a legacy system.
For order creation I intend to use BAPI_ALM_ORDER_MAINTAIN but this function does not provide the possibility to enter address information.
I would not like to have to create a partner and assign it to the order as this address will be used only once.
Does anyone have suggestions how to do it ?.
Thanks.
Roberto.

Roberto,
Try this:
*& Report ZPJA_ADDR_TX
report zpja_addr_tx.
data: lt_adrc type standard table of adrc with header line.
data: lt_adrc1 type standard table of addr1_data with header line.
* get address from first object
call function 'ADDR_SELECT_ADRC_SINGLE'
exporting
    addrnumber        = '0000033071'
tables
    et_adrc           = lt_adrc
exceptions
    address_not_exist = 1
    parameter_error   = 2
    internal_error    = 3
    others            = 4.
loop at lt_adrc.
move-corresponding lt_adrc to lt_adrc1.
lt_adrc1-name1 = sy-timlo.   " write current time for testing
append lt_adrc1.
endloop.
* update second address
call function 'ADDR_UPDATE'
exporting
    address_data        = lt_adrc1
    address_number      = '0000033205'
    date_from           = '00010101'
    language            = sy-langu
    check_empty_address = ' '
    check_address       = ' '
exceptions
    address_not_exist   = 1
    parameter_error     = 2
    version_not_exist   = 3
    internal_error      = 4
    others              = 5.
call function 'ADDR_MEMORY_SAVE'.

Sales orders with expired dates should not consider in MRP

Hi,
My requirement is that when i m running MRP for sales order for which expiry date has already been lapsed or over.sysyem should not create any mrp elements(Planned order) for such Sales orders.
We have maintained one Z table which gives the validity period(Expiry date) for sales order according to their respective division.
if MRP running date lies after the date of expiry of sales order, system shoul not allow to run MRP for that sales order or it should pop some message while executing MRP run before saving it.
How we can achieve this?
Pls suggest.....
Rgds,
Yogesh Thorat..

Since as per standard, there is no concept called validity period for sale order and you are maintaining in a zee table, definitely your requirement has to be met with user exit or function module or some enhancements.
Perhaps, you can try with MRP Enhancements
a) LMDR2001 or
b) LMDZU001
to meet your requirement.
thanks
G. Lakshmipathi

Query for all open sales order with a date range

Hi Experts!
I wrote this query that will look up all open sales order of a particular customer and how much was served:
SELECT T0.[DocNum] 'OS #', T0.[DocDate] 'Posting Date', T0.[CardName] 'Customer', T1.[Dscription] 'Item Description',T4.[SalUnitMsr] 'Sales UOM', T4.[InvntryUom] 'Invty UOM', T1.[UseBaseUn] 'Use of Invty UOM' , T1.[Quantity], T1.[Quantity]-T1.[OpenQty] 'Served Qty', T1.[OpenQty] 'Unserved Qty' FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCTG T2 ON T0.GroupNum = T2.GroupNum INNER JOIN OSLP T3 ON T0.SlpCode = T3.SlpCode INNER JOIN OITM T4 ON T1.ItemCode = T4.ItemCode WHERE T0.[DocStatus] = 'O' and T0.[CardName] =[%0]
However, I don't know how to input a parameter for the date range in a query. Can anyone help with this issue?
Your input will be highly appreciated.
Warm regards,
Jen

Hiiiiiii
Try This.....
SELECT T0.DocNum 'OS #', T0.DocDate 'Posting Date', T0.CardName 'Customer', T1.Dscription 'Item Description',T4.SalUnitMsr 'Sales UOM', T4.InvntryUom 'Invty UOM', T1.UseBaseUn 'Use of Invty UOM' , T1.Quantity, T1.Quantity, T1.OpenQty 'Served Qty', T1.OpenQty 'Unserved Qty' FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCTG T2 ON T0.GroupNum = T2.GroupNum INNER JOIN OSLP T3 ON T0.SlpCode = T3.SlpCode INNER JOIN OITM T4 ON T1.ItemCode = T4.ItemCode WHERE T0.DocStatus = 'O' and T0.CardName ='[%0]' and (T0.DocDate>='[%1]' and T0.DocDate<='[%2]')
Regards,

Pop up new form(Purchase Order) with current data

Dear All,
i have created a COPY TO button in my addon form. Now my quiry is that when ever i press the COPY TO button the purchase order form will open with my addon form data. Kindly suggest me the code.
Thanx
Sanjoy Paul

Hi...
         use this code...
Try
SBO_Application.ActivateMenuItem("2305")
       oForm = SBO_Application.Forms.ActiveForm
            OItem = oForm.Items.Item("4")
            Oedit = OItem.Specific
            Oedit.Value = vendor.ToString()
            rs1 = Nothing
            rs1 = OCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
            'rs1.DoQuery(" Select Ur Table")
            'OItem = OPOForm.Items.Item("aaa")
            'Oedit = OItem.Specific
            'Oedit.Value = rs1.Fields.Item("Ur - Field").Value & ""
            OItem = OPOForm.Items.Item("bbb")
            Oedit = OItem.Specific
            Oedit.Value = rs1.Fields.Item("Ur - Field").Value & ""
        Catch ex As Exception
            SBO_Application.MessageBox(ex.Message)
        End Try
REM Matrix
OItem = oForm.Items.Item("38")
        oMatrix = OItem.Specific
        oCols = oPoMat.Columns REM Columns
Oedit = oCols.Item("1").Cells.Item(1).Specific 'item no
            Oedit.Value = itmcd.ToString()
It Will Work...
Regards...
Billa 2007

Regarding multiple schedule lines in sales order with same date

Hi All,
we create the Orders from RFC and the orders are going to Multiple Schedule lines for the same date.
period       delivery date          ordered quan       confirmed quantity
D     10/11/2007                10                    0
D     10/11/2007                 0                     10
here for the same date in first line it is not confirming and in the second line it is confirming the quantity for the same date.
On what conditions it is possible??????
Any one have the solution for this Please send it to me [email protected]
Regards,
Prasad

Just check the schedule line details i.e go to schedule line---shipping. You will find that although the del. date is same in both the case but the timings were different e.g material availability time etc will be different in both these lines. So though the dates may be same its time difference that's causing the second schedule line.
Reward points if useful

When using pc banking with bnpparibasfortis, transfer orders with future date in august of september don't work with nightly.

restart with addons disabled doesn't solve the problem. fill in the date manually in stead of using the calender of the website doesn'make any difference. amount; benificiary neither.
june; july; october work fine. the problem is relatied to nightly: the bank web site works with google chrome (and probably with other browsers).
i receive no error message, but either the reply to the bank's server is in wrong format; or the signal is rejected by nightly or java.

Whoops, I just realized that you are using the Win64 version of Nightly!
It's not even being actively developed right now; further development has on hiatus for quite awhile now. The build server is just spitting out new versions to make sure a change in the 32-bit Windows build doesn't break something that would need to be fixed in the future once Win64 development is resumed.
That said, do you have a 64-bit version of Java installed?
Your system details doesn't indicate that Java 64 is installed or Night isn't finding it.
As far as the problem you are having, check the Browser Console for errors related to your bank domain.
https://developer.mozilla.org/en-US/docs/Tools/Browser_Console
Might have a clue as to your problem.

Production order basic dates (start and finish) in past

Hi,
My clinet has got one requirement where in they want to create an production order with past date (Basic start and finish). I found one way to achieve this by selecting the scheduling type as "Only Capacity requirement", but the disadvantage is that the order will not get scheduled.
Do you know any other method to achieve this functionality?
Thanks and Regards
Purushothaman Nagarajan

Dear Friend,
As i said, in Production order, under Production order - Setting - Scheduling maintain the number of days in past (says 100 days).
Now in below select the scheduling type as backward scheduling and in Finish date give the date which is in past and now enter (or schedule the order). Because of this system will propose the start date which will also be in past.
Regards,
JItendra

Open sales order report with billing date.

Hi,
I want to know if there's an available report for open sales order with billing date field.
Thank you.

Hi,
If your case is "Order-related" Billing,you can use the T.Code "VF04" for this purpose.
One more way is to go for a custom report.
Make a copy of code of the T.Code "VA05n"(Program Name is "SD_SALES_ORDERS_VIEW").
Change the code as per your requirement to display the field "Billing Date" in the report.
Check with your ABAPer if you wish to go for a custom report.
Regards,
Krishna.

Order with backdate

Hi Experts
Iam not able to create order with basic start date in past.Its always taking the current date.how to do this?
Regards
KRISHNANRAMAN

hi
in IMG settings for scheduling parameters (OPU7) for your order type specify the the number of days in past system will accept or select your suitable scheduling type
regards
thyagarajan

Opening a System-Form with selected Data

Hi,
i´m looking for a way to open a System-Form, e.g. Orders with
selected Data.
In the moment i do the following:
     application.ActivateMenuItem("2050"); // orders
     SAPbouiCOM.Form belegForm = application.Forms.ActiveForm;
     belegForm.Mode = SAPbouiCOM.BoFormMode.fm_FIND_MODE;
     SAPbouiCOM.EditText edDocNum = (SAPbouiCOM.EditText)belegForm.Items.Item("8").Specific;
     edDocNum.Value = "4711";
     belegForm.Items.Item("1").Click(SAPbouiCOM.BoCellClickType.ct_Regular);
This works, but the screen is blinking, because first the form ist opened and shown with
empty values and then filled.
Is there a way to activate the form and do the search-Operation and afterwards show it ?
I think ist must be possible, because when clicking on the link-Button near CardCode, the Contacts-Form
is opened in this way.
regards Matthias

Hi Ibai,
i have tested both: freeze and form.visible = false in
the form_load-Event. It doesn´t work here.
Also neither the call
   application.ActivateMenuItem("1281"); // find
nor the call
   oForm.Mode = SAPbouiCOM.BoFormMode.fm_FIND_MODE;
work in the form_load-Event.
After the form-Load-Event the et_FORM_ACTIVATE-Event is called.
Here the functions work, but here the screen is already visible.
regards Matthias

Problem when creating planned order with MRP run

Hello,
I create a material with a fix reorder point, MRP type VB. When I run MRP with MD03 on this material I have several problems :
- planned order is created with an opening date in the past, so I have error 'Opening date in the past' in MD04. How can I generate a planned order with opening date not in the past
- when changing manually opening date, after running again MD03, I have error 'No BOM selected'. Material is configurable, has a text BOM, a routing and a configuration profile. What is the problem? When modifying planned order, I have message :
Material requires configuration
Message no. 61259
Diagnosis
Orders and requirements for a configurable material must have characteristic values.
Usually, you should create a variation for configurable materials managed in inventory management which has the default variant configuration.
System Response
MRP: Requirements without characteristic values for a material cannot be planned in MRP.
Procedure
Check requirements or orders.
Create a configuration evaluation for the material in the material master record if necessary.
Thanks in advance.

Hi
I am facing the problem. Could you please tell me if you have resolved the above problem? If yes, Could you please provide me as how you resolved? Thanks in advance.
Thanks
Nagesh.

MF50 - ManualPlanned order with Basic Dates

Similar Messages

Maybe you are looking for