Microsoft Project Server 2013 with SharePoint Standard 2013
Hi,
We are using SharePoint 2013 standard. What are our options to implement project web app into our SharePoint architecture? Please note that we are not using SharePoint Server.
Thanks,
Project Server 2013 requires SharePoint Server 2013 Enterprise edition. Users that use Project Server functionality require a SharePoint Server Standard CAL, Enterprise CAL, and Project Server CAL.
I'm not sure I understand your last comment, SharePoint Server 2013 Standard Edition is SharePoint Server.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights
Similar Messages
-
Error while creating a Timesheet - Project Server 2013
Hi everyone,
One of user of PWA encounters an issue when he tries to create a timesheet. This error only occurs with a timesheet of
a specific period, he can create all the other timesheet.
So, when he creates the timesheet, this error occurs : "The timesheet creation failed, because of problems with Project Web App or with data validations"
After reloaded the list of the timesheets, a link to go to the specific timesheet
is available but if we click on it, we have this error :
"View Failue - The view failed to load"
I think , this error occurs
because the timesheet is not realy existing even if we have a link to it.
In the log (full log at the end), I've got this error :
Exception occured in method 'TimeSheet.CreateTimesheet' System.ArgumentException: These columns don't currently have unique values.
I've found this link with the same kind of problem :
http://social.technet.microsoft.com/Forums/projectserver/en-US/b0a92afc-11fc-40ef-9a44-357d953b31f6/unable-to-open-or-create-timesheets-these-columns-dont-currently-have-unique-values?forum=projectserver2010general but I've checked and published all the
user project but still have the error.
Have you got any idea where are these columns ? How can I found them without checked every project of PWA ?
Thanks,
Patmol
Full logs, for information :
[bucketHash:E3B9DED0] Exception occured in method 'TimeSheet.CreateTimesheet' System.ArgumentException: These columns don't currently have unique values. at System.Data.ConstraintCollection.AddUniqueConstraint(UniqueConstraint constraint) at System.Data.ConstraintCollection.Add(Constraint constraint, Boolean addUniqueWhenAddingForeign) at System.Data.DataTable.set_PrimaryKey(DataColumn[] value) at Microsoft.Office.Project.Server.DataAccessLayer.Generated.TimesheetDalBase.ReadCustomFieldsForAssignments(ISet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportCustomFields(HashSet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportActualsAndCustomFields(IEnumerable`1 assignmentUids, ISet`1 userImported) at Microsoft.Office.Project.Server.BusinessLayer.TimesheetLoaderForGrid.Load() at Microsoft.Office.Project.Server.BusinessLayer.TimeSheet.CreateTimesheet(TimesheetDataSet dsDelta, PreloadType preloadType) at Microsoft.Office.Project.Server.Wcf.Implementation.TimeSheetImpl.<>c__DisplayClass45.<CreateTimesheet>b__44() at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions) StackTrace: at Microsoft.Office.Project.Server.Native.dll: (sig=6ea170d1-988e-4153-9f1d-0305c0ea0309|2|microsoft.office.project.server.native.pdb, offset=3C1E) at Microsoft.Office.Project.Server.Native.dll: (offset=1255D)
Watson bucket parameters: Microsoft Project Server 2013, ULSException14, 070f6ea0 "project server", 0f0011db "15.0.4571.0", ea364808 "system.data", 0400766f "4.0.30319.0", 52310bef "thu sep 12 02:33:51 2013", 00000e02 "00000e02", 00000020 "00000020", 44395864 "argumentexception", 00101621 "aeby7"
Error is: GeneralUnhandledException. Details: General Unhandled Exception in _TimeSheet.CreateTimesheet_ Attributes: System.ArgumentException: These columns don't currently have unique values. at System.Data.ConstraintCollection.AddUniqueConstraint(UniqueConstraint constraint) at System.Data.ConstraintCollection.Add(Constraint constraint, Boolean addUniqueWhenAddingForeign) at System.Data.DataTable.set_PrimaryKey(DataColumn[] value) at Microsoft.Office.Project.Server.DataAccessLayer.Generated.TimesheetDalBase.ReadCustomFieldsForAssignments(ISet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportCustomFields(HashSet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportActualsAndCustomFields(IEnumerable`1 assignmentUids, ISet`1 userImported) at Microsoft.Office.Project.Server.BusinessLayer.TimesheetLoaderForGrid.Load() at Microsoft.Office.Project.Server.BusinessLayer.TimeSheet.CreateTimesheet(TimesheetDataSet dsDelta, PreloadType preloadType) at Microsoft.Office.Project.Server.Wcf.Implementation.TimeSheetImpl.<>c__DisplayClass45.<CreateTimesheet>b__44() at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions) . Standard Information: PSI Entry Point: Project User: i:0#.w|wavenet\cev Correlation Id: 9709e41b-9a18-e411-941e-00155d029b05 PWA Site URL: http://intranet.wavenet.lan/PWA SA Name: Project Server Application PSError: GeneralUnhandledException (42), LogLeve...Hi Patmol,
Have you tried to go to the previous or next timesheet and then navigate with the "previous period" or "next period" to the timesheet in question.
Also have you tried to open it using a delegation session?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
I was reviewing the Microsoft Project Server 2013 licensing terms and noticed the following:
PPM solutions require a Project Server 2013 license for each running
instance of the software
(source: http://office.microsoft.com/en-001/project/microsoft-project-licensing-project-for-multiple-users-online-and-on-premises-project-management-software-FX103802201.aspx)
The PUR mentions something similar:
For each license, you may use one Running Instance of server software
(source: http://www.microsoftvolumelicensing.com/ProductPage.aspx?pid=443)
You have to install Project Server on each SharePoint server in your farm. In the past it has always been said that you need one Project Server License for each installed copy (so for every SharePoint server in the farm).
Has anything changed for Project Server 2013?
Is a Project Server License only required for the SharePoint Server where you activate the Project Server Application Service?
Or does running equals installed when it comes to licensing?
Anyone can shed some light on this? Thank you!I agree with Bernhard on this one....there's been no real change for on-prem licensing....you still need a Project Server license for each server in the farm.
That being said, there was a significant change (and confirm with your local MSFT rep), but in some cases, the online subscription pricing may be used for on-prem installations, i.e. I can pay by user by month instead of buying the CAL. I don't think
this impacts the server licensing, but worth noting.
The "Running Instance" terminology is maybe meant to capture the VM scenario where I have one physical server running multiple VMs, each one running Project Server?
Andrew Lavinsky [MVP] Blog: http://azlav.umtblog.com Twitter: @alavinsky -
Project Server 2013 AD Enterprise Resource Pool Synchronization Exception
Hello,
I am looking for assistance from the project server community.
When I click “Save and Synchronize” on the Active Directory Enterprise Resource Pool Synchronization page nothing happens and the status does not change.
This is a new instance of PWA and I am preforming this task using the farm admin account. The farm admin account can read AD.
Error 1:
w3wp.exe (0x1B98)
0x0B8C Project Server
General aeby7
Exception [bucketHash:F08803DE] Exception occured in method 'Admin.ResolveActiveDirectoryGroups' System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at Microsoft.Office.Project.Server.ClaimsHelper.GetFormsAuthenticationProviderName(Uri context, SPUrlZone zone)
at Microsoft.Office.Project.Server.BusinessLayer.ActiveDirectoryUtility.TryGetGroupInfo(String searchRoot)
at System.Linq.Enumerable.WhereSelectArrayIterator`2.MoveNext()
at System.Linq.Buffer`1..ctor(IEnumerable`1 source)
at System.Linq.Enumerable.ToArray[TSource](IEnumerable`1 source)
at Microsoft.Office.Project.Server.Wcf.Implementation.PWAImpl.<>c__DisplayClassf2.<AdminResolveActiveDirectoryGroups>b__f1()
at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions) StackTrace:
at Microsoft.Office.Project.Server.Native.dll: (sig=[sig]|2|microsoft.office.project.server.native.pdb, offset=3C1E) at Microsoft.Office.Project.Server.Native.dll: (offset=1254D)
d360539c-6d89-70e7-c077-92da686b0689
Error 2:
Error is: GeneralUnhandledException. Details: General Unhandled Exception in _Admin.ResolveActiveDirectoryGroups_ Attributes:
System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at Microsoft.Office.Project.Server.ClaimsHelper.GetFormsAuthenticationProviderName(Uri context, SPUrlZone zone)
at Microsoft.Office.Project.Server.BusinessLayer.ActiveDirectoryUtility.TryGetGroupInfo(String searchRoot)
at System.Linq.Enumerable.WhereSelectArrayIterator`2.MoveNext()
at System.Linq.Buffer`1..ctor(IEnumerable`1 source)
at System.Linq.Enumerable.ToArray[TSource](IEnumerable`1 source)
at Microsoft.Office.Project.Server.Wcf.Implementation.PWAImpl.<>c__DisplayClassf2.<AdminResolveActiveDirectoryGroups>b__f1()
at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName,
IEnumerable`1 actions) . Standard Information: PSI Entry Point:
Project User: i:0#.w|[DOMAIN\UserID] Correlation Id: f1f1a77f-6b45-e311-9407-00155d2abe21 PWA Site URL: [PWA URL] SA Name: Project Server Service Application PSError: GeneralUnhandledException (42), LogLevelManager Warning-ulsID:0x00101622 has no entities
explicitly specified.Hi,
I also get the same error when I'm trying to do the synchronization between Enterprise Resource Pool and Active Directory.
I am in a single domain topology between Project Server 2013 and AD, and I'm doning the synchronization with the farm admin account, who has read/write access to AD.
Here are the last relevant messages I see:
w3wp.exe (0x2BE8) 0x1568 Project Server General aeby7 Exception
[bucketHash:F0FACBDF] Exception occured in method 'Admin.ResolveActiveDirectoryGroups' System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at Microsoft.Office.Project.Server.ClaimsHelper.GetFormsAuthenticationProviderName(Uri context, SPUrlZone zone)
at Microsoft.Office.Project.Server.BusinessLayer.ActiveDirectoryUtility.TryGetGroupInfo(String domain, String searchPath, String searchFilter)
at Microsoft.Office.Project.Server.BusinessLayer.ActiveDirectoryUtility.TryGetGroupInfoByClaim(String encodedClaim)
at System.Linq.Enumerable.WhereSelectArrayIterator`2.MoveNext()
at System.Linq.Buffer`1..ctor(IEnumerable`1 source)
at System.Linq.Enumerable.ToArray[TSource](IEnumerable`1 source)
at Microsoft.Office.Project.Server.Wcf.Implementation.PWAImpl.<>c__DisplayClass10a.<AdminResolveActiveDirectoryGroups>b__109()
at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions) StackTrace:
2b3d83ee10e5|2|, microsoft.office.project.server.native.pdb, offset=3C1E)
at Microsoft.Office.Project.Server.Native.dll: (offset=1255D)
w3wp.exe (0x2BE8) 0x1568 Project Server Unified Logging Service c91s Monitorable
Watson bucket parameters: Microsoft Project Server 2013, ULSException14, 070f6ea0 "project server", 0f001181 "15.0.4481.0", 6962a0f6 "microsoft.office.project.server.administration", 0f0011ad "15.0.4525.0", 51ade0c4 "tue jun 04 14:42:44 2013", 0000020f
"0000020f", 0000003b "0000003b", 0560164b "keynotfoundexception", 00101621 "aeby7"
w3wp.exe (0x2BE8) 0x1568 Project Server General aeby8 Medium
Error is: GeneralUnhandledException. Details: General Unhandled Exception in _Admin.ResolveActiveDirectoryGroups_ Attributes: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at Microsoft.Office.Project.Server.ClaimsHelper.GetFormsAuthenticationProviderName(Uri context, SPUrlZone zone)
at Microsoft.Office.Project.Server.BusinessLayer.ActiveDirectoryUtility.TryGetGroupInfo(String domain, String searchPath, String searchFilter)
at Microsoft.Office.Project.Server.BusinessLayer.ActiveDirectoryUtility.TryGetGroupInfoByClaim(String encodedClaim)
at System.Linq.Enumerable.WhereSelectArrayIterator`2.MoveNext() at System.Linq.Buffer`1..ctor(IEnumerable`1 source)
at System.Linq.Enumerable.ToArray[TSource](IEnumerable`1 source)
at Microsoft.Office.Project.Server.Wcf.Implementation.PWAImpl.<>c__DisplayClass10a.<AdminResolveActiveDirectoryGroups>b__109()
at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions) . Standard Information: PSI Entry Point: Project User: LUXAIRLG\SQLADMIN2012
Correlation Id: 6cef3814-b3a2-e311-93f9-005056921080 PWA Site URL: xxx SA Name: PS2013 - Project Server Service Application PSError: GeneralUnhandledException (42). LogLevelManager Warning-ulsID:0x00101622 has no entities explicitly specified.
w3wp.exe (0x2BE8) 0x1568 Project Server Project Web App af04k Medium
Void SaveButtonClick(System.Object.System.Web.UI.WebControls.CommandEventArgs) : GeneralUnhandledException
Any ideas?
Thanks in advance -
Project Server 2013 - Approved Tasks not applied to Project Schedule
Environment Details: Microsoft Project Server 2013 SP1
When an Resource completes a tasks within the Task or Timesheet page at the end of each day, the tasks is routed to the Project Owner for approval. The Project Owner (Project Manager) approves the task. During this process no errors are displayed.
When the Project Owner (Project Manager) goes into the Project Professional 2013 client to view how the project is progressing, and update the project completion date, the updates is not applied to the project.
This worked for some time, but has recently stopped working with no changes made to the environment. Any help would be great, as our project manager's are manually updating the tasks prior to approving them so they can report back on the project each week.Hello ProjMgrMatt
Sounds pretty serious, but I think something is missing somewhere.
Make sure that the Status Manager field is the same as the Project Owner.
Check to queue to be sure that nothing is stuck and waiting.
Create a new project, publish, submit, approve, etc and see if it still happens.
Cheers!.
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries -
Problem after installation Project Server 2013 CU September 9, 2014
Dear All,
I have some problems after installation
Project Server 2013 CU September 9, 2014 (Hotfix 2883072) on 3 level farm
Before installing CU, I have installed
SP1 for Project Server 2013, installation and configuration was successful.
Then I have installed CU and I have not get any errors during installation process. Then I have restarted servers and in SharePoint health analyzer got an error about patch/installation status
on WFE server.
I checked in Windows installed updates and hotfix is installed. I checked in SharePoint Update and Upgrade history and there were no errors during installation. But when I checked in Manage
Patch Status list I found an information:
Language Pack for SharePoint and Project Server 2013 - Russian
Microsoft Project Server Russian Language Pack 15.0.4420.1017 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Microsoft Project Server 2013
Microsoft Project Server English Language Pack 15.0.4571.1502 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Service Pack 1 for Microsoft Project Server 2013 (KB2880553) 64-Bit Edition
15.0.4571.1502 Installed
Microsoft Project Server Web Front End Server
15.0.4571.1502 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Service Pack 1 for Microsoft Project Server 2013 (KB2880553) 64-Bit Edition
15.0.4571.1502 Installed
If I run installation again I get message that nothing will be updated - no update needed.
Please help, how I can install missed packages?The problem was solved !
I solve it using two ways:
1. I have installed the hotfix for Project Server - Hotfix for Project Server 2013 October 14, 2014 KB 2889959 (Projectserverwfe-x-none.msp, Projectservermui-Language-Code.msp)
2. using command
Psconfig -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures -cmd installcheck -noinstallcheck
After two actions I was able to run SharePoint Configuration Wizard and upgrade database. Configuration completed successful. -
Microsoft Project Server Online
I need to know Microsoft Project Server Online fees/user and
if we have a discount as we are a gold Microsoft partner or for free, please advise?Hi,
We can use the Microsoft Project Server 2013 trial version with below link:
http://office.microsoft.com/en-us/project/project-server-2013-project-portfolio-management-software-FX103802061.aspx
As far as I know, Microsoft has different business policy in different states and here is a technical forum. Thus, I recommend we connect the Customer Service Center or local provider.
http://support.microsoft.com/gp/customer-service-phone-numbers/en-us
Thanks for your understanding.
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]" -
Issue while installing Ms Project Server 2013 on MS Server 2012 R2 with Sharepoint Server 2013
Hello MS Support Team,
I installed SQL server 2012 & Sharepoint server 2013 and after that the MS project Server 2013 is not installing on the same server -- pls hv a look the enclosed screenshot. sent at [email protected] and guide me to resolve it on priority.
A windows poped up - Installation Error - This Project requires MS Sharepont Enterprise edition... (Which is not available on the MSDN Server)..only standard edition available.
Please reply asap @ [email protected] - Call @ 0120471384
Kind Regards,
Vinay Bhardwaj
Network System Administrator - GREC (IN)
Rockwell Automation | A-66, Sector 64 | Noida | India
LISTEN. THINK. SOLVE
IP : 71384 | E : [email protected] | W : www.rockwellautomation.comHi Siriosus,
Indeed you do need Sharepoint Server 2013
Enterprise for Project Server 2013.
See article below where it is mentionned:
Project Server 2013 requires the Enterprise edition of SharePoint Server 2013. Prior versions of SharePoint Server and SharePoint Foundation 2013 are not supported.
http://technet.microsoft.com/en-us/library/ee662114(v=office.15).aspx
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
Can't open Project Server 2013 word documents with office 2010 installed
hello forum members,
we having issues opening a word document in a Project Server 2013 . we have Office 2010 on our computers installed.
when I click on a document link, i get a message "The webpage cannot be displayed". the only way to open a document is to right click on link and select "Open".
Does Project Server 2013 require Office 2013 installed? If not, is there a way to open documents in Project Server 2013 without right clicking on links?
tatiana
tatianaHi Tatiana,
This is the know issue. I have experienced this issue with one of our client. The cause of issue as below -
Scenario
You have 2007 Microsoft Office installed on a computer.
On the same computer, you also have a Microsoft Office 2013 application installed, such as Microsoft Lync 2013 or Microsoft Word 2013.
SOLUTION
To work around this issue, remove the Microsoft SharePoint Foundation Support program component from the Office 2013
installation on the affected computer or computers. To do this, follow the “Install or remove individual Office program components” section of the following Microsoft Office website:
Install or remove individual Office
programs and components
(http://office.microsoft.com/redir/HA010354261.aspx)
After you complete these steps, repair 2007 Office. For more information about how to repair the installation, click
the following article number to go to the article in the Microsoft Knowledge Base:
924611
(http://support.microsoft.com/kb/924611/ )
How to install the individual 2007 Office features or to repair the installed 2007 Office programs
Note When
you follow these steps, set the Microsoft SharePoint Foundation Support
component within Office Tools to Not Available.
This solution doesn't apply to scenarios in which SharePoint Designer 2013 is installed on the affected computer.
You can find further details here at Microsoft support site -
http://support.microsoft.com/kb/2888015
Hope this helps you.
Cheers, Badal -
After installing Project Server 2013 (without updating SharePoint Server 2013 SP1))
I am facing the problem while opening project web app. I configured the SharePoint 2013 and project server 2013. Here is the detail what I performed the steps:
OS Server 2012 R2, SQL Server 2012, SharePoint server 2013 version
15.0.4420.1017, Project Server 2013 version
15.0.4454.1000. SharePoint configured and running successfully. After project web app site provisioning successfully completed. I got the below error.
Microsoft.Office.Project.PWA.WebParts.PWAPart' from assembly 'Microsoft.Office.Project.Server.PWA, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' cannot reduce access.
I run this psconfig -cmd upgrade -inplace b2b -wait -force. But still getting same error.
Previous steps:
Earlier I had also tried to install SharePoint Server 2013 SP1 "3823428". After the installation SP1 some of sharePoint site features suddenly stopped e.g: Cannot browse "Service Applications -->
Manage service applications" option even after re-start the server. This was previous error after upgrading SP1
"Method 'get_IsClientValid' in type 'Microsoft.SharePoint.WorkflowServices.WorkflowServiceApplicationProxy' from assembly 'Microsoft.SharePoint.WorkflowServices,
Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' does not have an implementation"
Anyone can help me!!! Thanks...
Faisal Numanhello,
For SP2013 and PS2013 to work properly on Windows Server 2012 R2 you need to use the SP1 install media for both, download SharePoint 2013 with SP1 and Project Server 2013 with SP1
http://support.microsoft.com/kb/2891274
http://blogs.technet.com/b/office_sustained_engineering/archive/2014/03/03/announcing-availability-of-slipstreamed-office-2013-and-sharepoint-server-2013-with-sp1.aspx
http://blogs.technet.com/b/projectsupport/archive/2014/02/25/project-2013-and-project-server-2013-service-pack-1.aspx
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS -
Project Server 2013: QueueUpdateProject2 fails with LookupTableItemInvalidLookupTable error
Hi,
We have a strange problem here using the newly introduced QueueUpdateProject2 PSI method in WebSvcProject. The server is running version 15.0.4481.1005 (Project Server 2013, March 2013 PU). Here's the minimum repro code:
projectService.CheckOutProject(projectUid, sessionUid, sessionDescription);
var projectDataSet = projectService.ReadProject(projectUid, DataStoreEnum.WorkingStore);
projectDataSet.Project[0].SetModified(); // Simplest repro
var jobUid = Guid.NewGuid();
projectService.QueueUpdateProject2(jobUid, sessionUid, projectDataSet, false);
Unfortunately the QueueUpdateProject2 queue job always fails with error LookupTableItemInvalidLookupTable for this project. Here's the full error information as shown in PWA:
LookupTableItemInvalidLookupTable for lookup table value b99b7782-924c-e311-9404-00155d027b07:
LookupTableItemInvalidLookupTable (11073). Details: id='11073' name='LookupTableItemInvalidLookupTable' uid='b1c62182-924c-e311-9404-00155d027b07'.
Queue:
GeneralQueueJobFailed (26000) - ProjectUpdate.ProjectUpdate2Message. Details: id='26000' name='GeneralQueueJobFailed' uid='b020bf82-924c-e311-9404-00155d027b07' JobUID='f294b911-f500-45bc-91ec-a493bdf3d07a' ComputerName='1beb2ff2-5dc9-4136-aa24-1c2be86c5768'
GroupType='ProjectUpdate' MessageType='ProjectUpdate2Message' MessageId='2' Stage='' CorrelationUID='ce4e569c-0aa5-70d6-c576-8b3b764d14f1'. For more details, check the ULS logs on machine
1beb2ff2-5dc9-4136-aa24-1c2be86c5768 for entries with JobUID
f294b911-f500-45bc-91ec-a493bdf3d07a.
Here are some corresponding entries from the ULS log:
11/13/2013 19:36:30.82 Microsoft.Office.Project.Server (0x06D0) 0x1E60 Project Server Active Cache Save
myzo Medium Error is: LookupTableItemInvalidLookupTable. Details: LookupTableItemInvalidLookupTable for lookup table value b99b7782-924c-e311-9404-00155d027b07 . Standard Information: , LogLevelManager Warning-ulsID:0x6D797A6F has no
entities explicitly specified. ce4e569c-0aa5-70d6-c576-8b3b764d14f1
11/13/2013 19:36:30.82 Microsoft.Office.Project.Server (0x06D0) 0x1E60 Project Server Active Cache Save
4zbp Monitorable PWA:, ServiceApp:Project Server Service Application, User:i:0#.w|my\account, PSI: [TrackingId:fa790381-924c-e311-9404-00155d027b07][ResourceId:3222f5b7-c13b-e311-9404-00155d027b07][SessionGuid:db83645c-50e1-4368-a59f-94df13ff7d5e][SessionDescr:][JobGuid:af20bf82-924c-e311-9404-00155d027b07][ProjectGuid:81a4a757-c446-e311-9404-00155d027b07][PS_AC][400]
Microsoft.Office.Project.Server.BusinessLayer.WinProjUtility.WinProjException: LookupTableItemInvalidLookupTable for lookup table value b99b7782-924c-e311-9404-00155d027b07 at Microsoft.Office.Project.Server.BusinessLayer.WinProjUtility.P12Deserializer.PostReadRow(P12ContainerHeader
cntrHeader, Row row) at Microsoft.Office.Project.Server.BusinessLayer.WinProj.SaveProjectInternal(Guid projGuid, String projName, Int32 projType, Boolean ... ce4e569c-0aa5-70d6-c576-8b3b764d14f1
11/13/2013 19:36:30.82* Microsoft.Office.Project.Server (0x06D0) 0x1E60 Project Server Active Cache Save
4zbp Monitorable ...isNewProj, Guid jobGuid, Guid sessionGuid, Guid checkOutByResUid, String sessionDescr, Boolean isFirstPacket, Boolean isLastPacket, String newVersionStamp, Int16 dataFormatVersion, Boolean isDataCompressed, Byte[] projectData,
String winprojBuildNumber, ACProcessorType acProcType), LogLevelManager Warning-ulsID:0x347A6270 has no entities explicitly specified. ce4e569c-0aa5-70d6-c576-8b3b764d14f1
We would be happy to provide more information if needed. Project Professional can open and save the project just fine, so it seems to be unrelated to other forum posts (1, 2).
Has anybody seen this before? Any hints on where to search or what to look for?
Thanks,
Thomas
TPG The Project Group
[1] http://social.technet.microsoft.com/Forums/projectserver/en-US/da3c0d64-1ced-45dd-ace6-ce821fd1c362/what-are-the-lookup-fields-in-the-local-project-cant-publish-project-to-the-server
[2] http://answers.microsoft.com/en-us/office/forum/office_2010-project/error-110730x2b41-importsave-to-project-server/03fd792f-4451-4512-ac0b-ddad946c3e3Just to clarify, I get these errors in the ULS logs:
06-11-2014 14:15:02.42 w3wp.exe (0x23AC) 0x23E0 Project
Server Active Cache Save myzo Medium Error is: LookupTableItemInvalidLookupTable.
Details: LookupTableItemInvalidLookupTable for lookup table value 440c1ce7-61f1-e311-944d-00155de84b1a . Standard Information: PSI Entry Point: Project User: i:0#.w|africa\spsetupdev Correlation Id: f6a91701-62f1-e311-944d-00155de84b1a PWA Site URL:
http://epmdev.af.didata.local/PWA SA Name: SharePoint_EPM_Dev_ProjectServerService PSError: LookupTableItemInvalidLookupTable (11073), LogLevelManager Warning-ulsID:0x6D797A6F has no entities explicitly specified. 72d0999c-429e-80e4-4f95-1037e3c788ff
06-11-2014 14:15:02.42 w3wp.exe (0x23AC) 0x23E0 Project
Server Active Cache Save 4zbp Monitorable PWA:http://epmdev.af.didata.local/PWA,
ServiceApp:SharePoint_EPM_Dev_ProjectServerService, User:i:0#.w|africa\spsetupdev, PSI: [TrackingId:f6a91701-62f1-e311-944d-00155de84b1a][ResourceId:f6760993-7a33-47ef-8cea-0c9cc5231ae7][SessionGuid:6c189001-cd9e-e311-9426-00155d879c00][SessionDescr:ZABRYSVEPMD01\Dev
PWA][JobGuid:d3e31201-62f1-e311-944d-00155de84b1a][ProjectGuid:7537ccc0-7692-4456-93dd-fc7adcb5d1c8][PS_AC][807] Microsoft.Office.Project.Server.BusinessLayer.WinProjUtility.WinProjException: LookupTableItemInvalidLookupTable for lookup table value 440c1ce7-61f1-e311-944d-00155de84b1a
at Microsoft.Office.Project.Server.BusinessLayer.WinProjUtility.P12Deserializer.PostReadRow(P12ContainerHeader cntrHeader, Row row) at Microsoft.Office.Project.Server.BusinessLayer.WinProj.SaveProjectInternal(Guid projGuid, String projName,
Int32 projType, Boolean isNewProj, Guid jobGuid, Guid sessionGuid, Guid checkOutByResUid, String sessionDescr, Boolean isFirstPacket, Boolean isLastPacket, String newVersionStamp, Int16 dataFormatVersion, Boolean isDataCompressed, Byte[] projectData, String
winprojBuildNumber, ACProcessorType acProcType), LogLevelManager Warning-ulsID:0x347A6270 has no entities explicitly specified. 72d0999c-429e-80e4-4f95-1037e3c788ff
And in addition to that, we get the Error 9000 when saving in MSP.
Still downloading the files, but the more and more I look at it I'm hopeful this will solve our problem.
http://blogs.umtsa.co.za/nicoo -
Excel 2010 reporting with Project Server 2013
Our company purchased SharePoint Server 2013 and Project Server 2013, mainly for the reporting/BI attributes. I read that the report templates, etc. that can be used by Project Server web app can only be accessed with Excel 2013?? Does that mean that our
group/customers have to upgrade to Excel 2013 to take advantage of the Excel Services? This is a huge deal. Can you please let me know as soon as possible? Yikes!! :-OHi,
As far as I know, Excel 2010 is still supported by Project Server 2013.
See here:
https://technet.microsoft.com/en-us/library/ee683978.aspx
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
Timesheet Error with custom Line Classifications in Project Server 2013
We implemented Project Server 2013 last year and began using timesheets. We are a billable consulting group. In order manage our billing, we have created three custom line classifications, "Billable Onsite", "Billable Offsite",
and "Non-billable". We do not use "Standard" as a line where time is entered. We are using SEM. We have chosen no prepopulation on timesheets. Our system is updated through the March 2013 update.
The error we get is presented as "__error Loading" with the title bar of the pop-up reading "Message from webpage". This occurs when you attempt to add a new line to a timesheet and choose one of the custom line classifications.
A confusing aspect to this, while we have prepopulation turned off, the timesheet is populated with "Standard" lines for the tasks that are currently assigned to the user. We have come up with a workaround that works sometimes but not all the
time. When the user receives this error, they move away from the timesheet screen and then return. They add all of the applicable lines to the timesheet with "Standard" even if they already exist on the timesheet and save. Then
they add the lines with the appropriate line classification and the time. If they receive the "__error loading" error again, then the timesheet can not be corrected. You must delete the timesheet and recreate. We have been able
to recreate the problem in a vanilla install with a custom line classification added.
Just yesterday, I was able to find a error log entry that may help some of you identify the source:
General Unhandled Exception in _TimeSheet.GetTimesheetForGridJsonFromViewUid_ Attributes: System.ArgumentException: Assignment line already exists for assignment uid: d9afeb60-d589-e311-bd64-08edb9dd8afb at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.VerifyLineIsUnique(Guid
assignmentUid, Guid taskUid, Guid projectUid, Guid lineClassUid)
at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.CreateAssignmentLine(Guid assignmentUid, Guid taskUid, Guid projectUid, Guid lineClassUid, String taskName, String projectName) at Microsoft.Office.Project.Server.BusinessLayer.TimesheetSEM.CreateAssignmentLine(Guid
assignmentUid, Guid taskUid, Guid projectUid, Guid lineClassUid, String taskName, String projectName) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.AddTimesheetLine(Guid assignmentUid, Guid taskUid, Guid projectUid, Guid
classUid, ValidationType validationType, Guid lineUid, String taskName, String projectName, String comment) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportTimesheetLine(NewTask importedLine)
at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.<>c__DisplayClass4c.<AddNewLines>b__49(NewTask line) at Microsoft.Office.Project.Server.Library.PSUtility.Apply[T](IEnumerable`1 enumerable, Action`1 fn)
at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.AddNewLines(IEnumerable`1 newLines) at Microsoft.Office.Project.Server.BusinessLayer.TimesheetSEM.AddNewLines(IEnumerable`1 newLines) at Microsoft.Office.Project.Server.BusinessLayer.TimesheetLoaderForGrid.Load()
at Microsoft.Office.Project.Server.BusinessLayer.TimeSheet.GetTimesheetForGridJsonFromViewUid(JsGridSerializerArguments gridSerializerArgs, Guid tsUid, Guid viewUid, String changesJson, String viewOptionsJson) at Microsoft.Office.Project.Server.Wcf.Implementation.PWAImpl.<>c__DisplayClass2f5.<TimeSheetGetTimesheetForGridJsonFromViewUid>b__2f4()
at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions) . Standard Information: PSI Entry Point: Project User: i:0#.w|mayberry\nunderwood
Correlation Id: 91c4ca27-6492-e311-93ff-00155d149902 PWA Site URL: XXX SA Name: Project Services Application PSError: GeneralUnhandledException (42), LogLevelManager Warning-ulsID:0x00101622 has no entities explicitly specified.
We have not been able to find any similar timesheet issues here or on other boards. Our users, as you can imagine, are getting increasingly frustrated. A ny advice?
Thanks,
NateMore scenario testing today. Tested with both "No Prepopulation" and populate assigned task options! no difference in our instance. We are only updated through March 2013, waiting for IT support. We have previously tried the deactivation/reactivation
of custom classifications. Tried with and without template, no difference. So the new scenario and findings:
1. Create a project with 2 tasks, one assigned and one not. Save and publish.
2. Create a timesheet, do not use an existing timesheet. Here we found, in spite of population option chosen, the timesheet was populated with a Standard line for the assigned task. With no action taken other than creating timesheet, the reporting assignment
table showed the new entry.
3. Add an assignment to the other task in the project, publish.
4. Open the same timesheet period. Now I saw the other task appear on the screen. It did not show in the database. I could not save to make it appear in the database unless I did something else to the screen to make it "dirty". Once I did that,
I could save and the second Standard line appeared In the database.
If I tried to add a custom line class line to the TS when the Standard line was not in the database, I get the error. It doesn't matter if it shows on the screen.
If it shows on the screen but not in the db, and I attempt to add a non-standard line, it will error, unless I manually add the standard line first. The user would not know to do this.
You will not be able to reproduce if you make the assignments and then create the TS. You need to try in reverse order.
It appears as though there are issues with both the timesheet population options and the code that runs when the TS loads after it's initial creation. I'm wondering why on creation the standard line is created and committed to the db, but on reload with
new tasks it doesn't' do the same. Also when No Prepopulation is turned on, why my time sheets are always prepopulated.
Sorry for any typos, working from my ipad keyboard. Thanks for your help! -
After Project Server 2013 SP1 update (without updating Sharepoint Server 2013)
I get this error entering the PWA root:
Derived method
'RequiresWebPartClientScript' in type
'Microsoft.Office.Project.PWA.WebParts.PWAPart' from assembly
'Microsoft.Office.Project.Server.PWA, Version=15.0.0.0, Culture=neutral,
PublicKeyToken=71e9bce111e9429c' cannot reduce access
SharePoint Server 2013 version: 15.0.4420.1017
Project Server 2013 version: 15.0.4569.1506
There is no SP1 uninstall process? Totally lost!Hi Ximet,
If you go to Central Administration > System Settings > Manage Servers in this Farm. Do you see Upgrade Available for the servers.
If they show Upgrade Available, can you run the SharePoint Config Wizard one more time or you can also try running the command "psconfig -cmd upgrade -inplace b2b -wait -force"
Just curious to know if the issue is because the binaries have not been updated properly.
In case the issue persists and is impacting your business, I would suggest that you raise a support ticket with Microsoft so that we can further assist you on the case.
Cheers! Happy troubleshooting !!! Dinesh S. Rai - MSFT Enterprise Project Management
Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you. This can be beneficial to other community members reading the thread. -
Microsoft Project Server for SharePoint Standard
Hi,
We are using Microsoft SharePoint Standard version. Which product in Microsoft family should we add on to get the full capabilities of Microsoft Project into SharePoint Standard version? Is it Microsoft Project server? But Microsoft Project Server has a
prerequisite of SharePoint Server.
Any ideas?From a licensing perspective to run Project Server you require SharePoint Server 2013 Enterprise edition. A user (or device) that is using Project server would therefore require all the following CALs:
SharePoint Server Standard
SharePoint Server Enterprise
Project Server
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights
Maybe you are looking for
-
I know it's generally recommended (if you're going to bring data from one machine to another) to update the OS on the source computer before transfer. However, my MBP died unexpectedly and my information was backed up with TimeMachine in SnowLeopard
-
Who should I contact for a photo taken by iphone that could be a potential advertising idea.
I just found something AMAZING from a picture taken from an iphone and I want to contact the advertising department. (It is a great idea for advertising the big screen of iphone 6 plus) I am an international student from University of Illinois at Urb
-
Error msg "package org.apache.xmlrpc does not exist ... "
Hi everybody, I am new to java. While creating build through cruise control Error Msg comes BUILD FAILED Ant Error Message: C:\Program Files\CruiseControl\projects\Myproject\build.xml:47: Compile failed; see the compiler error output for details
-
Is it possible to make the mouse pointer visible during a Keynote presentation? Sometimes I like to use to point to something or use tools like Scriboard to make annotations. I figured out that using Dashboard makes the mouse pointer visible but is t
-
hi, regarding import pricing proceedure, i have removed the account key in pricing proceedure. but still system is posting the Cusoms and freight clearing account. where will be the assignment? can any one guide me on this. govind. - account key effe