Microsoft Virtual Machine Converter 3.0 throws Cannot Enumerate Disk ERROR

I am running the Microsoft Virtual Machine Converter 3.0 to migrate Windows 2012 R2
SP1 virtual machine from VMware on to Microsoft Azure. I followed all the pre-requisites of the tool. But, when I run the MVMC 3.0 tool it fails in the Analyze Disk stage, and displays this error below:
10/14/2014 16:24:18 -07:00 [3] VERBOSE: Analyzing disk C:\azure_storage\MVMC\0\disk-1.vhd
10/14/2014 16:24:23 -07:00 [3] VERBOSE: Disk C:\azure_storage\MVMC\0\disk-1.vhd is bootable
10/14/2014 16:24:30 -07:00 [3] VERBOSE: Microsoft.Accelerators.Mvmc.Engine.DiskCopyFailureException:
The virtual disk(s) attached to the source virtual machine were not successfully converted to VHD(s) and copied to the workspace folder path. ---> Microsoft.Accelerators.Mvmc.Engine.VolumeMvmcException: Could not enumerate volume with disk number "1".
at Microsoft.Accelerators.Mvmc.Engine.Volume.WinVolumeFinderService.GetWinPaths(UInt32
diskNumber)
at Microsoft.Accelerators.Mvmc.Engine.InjectionRejection.FirewallUpdater.UpdateFirewallRules(IOwnedVirtualDisk
virtualDisk, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.PostConversionTouchupService.UpdateFirewallRules(String
bootDiskPath, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest
machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
--- End of inner exception stack trace ---
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest
machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
10/14/2014 16:24:30 -07:00 [3] EXCEPTION: Microsoft.Accelerators.Mvmc.Engine.DiskCopyFailureException:
The virtual disk(s) attached to the source virtual machine were not successfully converted to VHD(s) and copied to the workspace folder path. ---> Microsoft.Accelerators.Mvmc.Engine.VolumeMvmcException: Could not enumerate volume with disk number "1".
at Microsoft.Accelerators.Mvmc.Engine.Volume.WinVolumeFinderService.GetWinPaths(UInt32
diskNumber)
at Microsoft.Accelerators.Mvmc.Engine.InjectionRejection.FirewallUpdater.UpdateFirewallRules(IOwnedVirtualDisk
virtualDisk, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.PostConversionTouchupService.UpdateFirewallRules(String
bootDiskPath, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest
machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
--- End of inner exception stack trace ---
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest
machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.<>c__DisplayClass3.<ConvertToDrivesAsync>b__2()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
10/14/2014 16:24:30 -07:00 [3] Exception caught : Microsoft.Accelerators.Mvmc.Engine.VolumeMvmcException:
Could not enumerate volume with disk number "1".
at Microsoft.Accelerators.Mvmc.Gui.Model.ConversionModel.ConvertGuestMachine()
at Microsoft.Accelerators.Mvmc.Gui.ViewModels.Machine.MachineCompletionViewModel.OnWorkerDoWork()

Same issue here. We DID have spanned disk over 2 x VMDKs but I have fixed that issue now and problem persists. The one thing I have yet to try is installing VMWare Tools - they were uninstalled on a previous failed conversion and I am getting an error saying
"VERBOSE: Microsoft.Accelerators.Mvmc.Engine.DiskCopyFailureException: The virtual disk(s) attached to the source virtual machine were not successfully converted to VHD(s) and copied to the workspace folder path. ---> Microsoft.Accelerators.Mvmc.Engine.DisablingNonWindowsGuestVHDException:
The virtual hard disk C:\Temp\MVMC\0\disk-0.vhdx on which you are trying to disabling VMWare tools, is not a valid Windows-guest OS virtual hard disk. (Are you trying to disable a virtual hard disk with Linux-guest or other OS in it?)"
I am about to install the tools and try again under advice from our partner

Similar Messages

Microsoft Virtual Machine Converter VMware To Hyper-V Cluster

I'm not sure if this should technically be in the clustering section but I have just moved from SCVMM 2012 SP1 to 2012 R2 and I kinda miss the built-in converter tool. What I used to do when converting VMware to Hyper-V was uninstall VMware Tools and then
I would do a physical to virtual conversion on the VMware virtual machine and SCVMM would handle copying the virtual machine while it was online and register it in our Hyper-V cluster. Now, the only thing I could come up with is the Microsoft Virtual Machine
Converter but it seems rather limited and doesn't seem to have an option to import to a cluster. So is the only option to convert it over to Hyper-V as if it were a local machine and then run another export/import process to get it in the cluster? I tried
to point it to a CSV and while it copied the disk over, it registered the virtual machine in ProgramData (the default location). This obviously causes issues when trying to make the VM highly available. Any one have a suggested process of the best way to go
about this? Thank you in advance for your time!

So no matter what option I choose, V2V always shuts down the source VM during the conversion process. On the other hand, if I use the old method of uninstalling VMware tools manually and then doing a P2V instead, the source VM has to stay online for
that type of process. Then I just have to migrate it to become highly available and that seems to accomplish what I want. The only annoying part is that I couldn't run it on my Win 8.1 Pro workstation as it requires the BITS feature to be installed
and that only appears to be available on server editions (correct me if there is a way to get it on 8.1). I guess the documentation (I think) says that it should run on server editions only but V2V runs fine from 8.1 since it doesn't need BITS since it's
an offline process.

Microsoft Virtual Machine Converter Error Converting

Hi Everyone,
I'm trying to use MVMC 3.0 on a Windows 2008R2 Server to capture P2V a Windows2008R2.
The first step went well, but on the second step he trow an error:
02/03/2015 17:05:05 +01:00 [1] Navigating to the 'Before You Begin' page.
02/03/2015 17:05:07 +01:00 [1] Moving Forward from the 'Before You Begin' page.
02/03/2015 17:05:07 +01:00 [1] Navigating to the 'Machine Type' page.
02/03/2015 17:05:09 +01:00 [1] Moving Forward from the 'Machine Type' page.
02/03/2015 17:05:09 +01:00 [1] Navigating to the 'Source' page.
02/03/2015 17:05:19 +01:00 [1] Value of 'MachineName' = 'dc'
02/03/2015 17:05:19 +01:00 [1] Value of 'UseSessionCredentials' = 'False'
02/03/2015 17:05:19 +01:00 [1] Pressing Next on the 'Source' page.
02/03/2015 17:05:19 +01:00 [1] Displaying busy cursor.
02/03/2015 17:05:19 +01:00 [1] Progress bar visibility changed to 'Visible'.
02/03/2015 17:05:19 +01:00 [1] Progress message: 'Validating the credentials'.
02/03/2015 17:05:19 +01:00 [3] Background worker thread started.
02/03/2015 17:05:50 +01:00 [1] Background task is complete.
02/03/2015 17:05:50 +01:00 [1] Displaying normal cursor.
02/03/2015 17:05:50 +01:00 [1] Progress message: ''.
02/03/2015 17:05:50 +01:00 [1] Progress bar visibility changed to 'Hidden'.
02/03/2015 17:05:50 +01:00 [1] Moving Forward from the 'Source' page.
02/03/2015 17:05:50 +01:00 [1] Navigating to the 'System Information' page.
02/03/2015 17:05:54 +01:00 [1] Displaying busy cursor.
02/03/2015 17:05:54 +01:00 [4] Background worker thread started.
02/03/2015 17:05:57 +01:00 [1] Background task is complete.
02/03/2015 17:05:57 +01:00 [1] Displaying normal cursor.
02/03/2015 17:06:01 +01:00 [1] Moving Forward from the 'System Information' page.
02/03/2015 17:06:01 +01:00 [1] Navigating to the 'Volume Configuration' page.
02/03/2015 17:06:05 +01:00 [1] Moving Forward from the 'Volume Configuration' page.
02/03/2015 17:06:05 +01:00 [1] Navigating to the 'VM Configuration' page.
02/03/2015 17:06:12 +01:00 [1] Moving Forward from the 'VM Configuration' page.
02/03/2015 17:06:12 +01:00 [1] Navigating to the 'Hyper-V Host' page.
02/03/2015 17:06:19 +01:00 [1] Value of 'MachineName' = 'localhost'
02/03/2015 17:06:19 +01:00 [1] Value of 'UseSessionCredentials' = 'True'
02/03/2015 17:06:19 +01:00 [1] Pressing Next on the 'Hyper-V Host' page.
02/03/2015 17:06:19 +01:00 [1] Displaying busy cursor.
02/03/2015 17:06:19 +01:00 [1] Progress bar visibility changed to 'Visible'.
02/03/2015 17:06:19 +01:00 [1] Progress message: 'Validating the credentials'.
02/03/2015 17:06:19 +01:00 [3] Background worker thread started.
02/03/2015 17:06:20 +01:00 [1] Background task is complete.
02/03/2015 17:06:20 +01:00 [1] Displaying normal cursor.
02/03/2015 17:06:20 +01:00 [1] Progress message: ''.
02/03/2015 17:06:20 +01:00 [1] Progress bar visibility changed to 'Hidden'.
02/03/2015 17:06:20 +01:00 [1] Moving Forward from the 'Hyper-V Host' page.
02/03/2015 17:06:20 +01:00 [1] Navigating to the 'Disk' page.
02/03/2015 17:06:26 +01:00 [1] Value of 'DestinationMachineSharePath' = '\\localhost\Hyper-V\P2V\DC'
02/03/2015 17:06:26 +01:00 [1] Value of 'IsFixedDisk' = 'False'
02/03/2015 17:06:26 +01:00 [1] Moving Forward from the 'Disk' page.
02/03/2015 17:06:26 +01:00 [1] Navigating to the 'Workspace' page.
02/03/2015 17:06:44 +01:00 [1] Value of 'WorkspacePath' = 'C:\Hyper-V\P2V\DC'
02/03/2015 17:06:44 +01:00 [1] Moving Forward from the 'Workspace' page.
02/03/2015 17:06:44 +01:00 [1] Navigating to the 'Network Configuration' page.
02/03/2015 17:06:45 +01:00 [1] Moving Forward from the 'Network Configuration' page.
02/03/2015 17:06:45 +01:00 [1] Navigating to the 'Summary' page.
02/03/2015 17:06:45 +01:00 [1] Progress message: 'Verifying if conversion can proceed based on inputs'.
02/03/2015 17:06:45 +01:00 [1] Progress bar visibility changed to 'Visible'.
02/03/2015 17:06:45 +01:00 [5] Background worker thread started.
02/03/2015 17:06:45 +01:00 [1] Background task is complete.
02/03/2015 17:06:45 +01:00 [1] Value of 'SummaryPageConversionWarnings' = ''
02/03/2015 17:06:45 +01:00 [1] Progress message: ''.
02/03/2015 17:06:45 +01:00 [1] Progress bar visibility changed to 'Hidden'.
02/03/2015 17:06:46 +01:00 [1] Moving Forward from the 'Summary' page.
02/03/2015 17:06:46 +01:00 [1] Navigating to the 'Completion' page.
02/03/2015 17:06:46 +01:00 [6] Background worker thread started.
02/03/2015 17:06:46 +01:00 [6] VERBOSE: Starting the P2V conversion.
02/03/2015 17:06:46 +01:00 [6] VERBOSE: Source physical machine: dc
02/03/2015 17:06:46 +01:00 [6] VERBOSE: Account used for the source physical : Administrator
02/03/2015 17:06:46 +01:00 [6] VERBOSE: Target Hyper-V host: localhost
02/03/2015 17:06:47 +01:00 [6] VERBOSE: Evaluating the P2V conversion request.
02/03/2015 17:06:47 +01:00 [6] VERBOSE: Evaluating P2V Machine conversion request:
Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.P2VMachineConversionRequest
02/03/2015 17:06:47 +01:00 [6] VERBOSE: Destination operating system information:
Operating System Name: Microsoft Windows Server 2008 R2 Standard
Version: 6.1.7601
Service Pack: Service Pack 1,0
CIMOS Type: 18
02/03/2015 17:06:48 +01:00 [6] VERBOSE: Copying directly to target Vm folder: False. Disk-to-VHD BITS client machine: HyperV2k8R2, target location C:\Hyper-V\P2V\DC\MVMC\0\.
02/03/2015 17:06:48 +01:00 [6] VERBOSE: Using https: True.
02/03/2015 17:06:48 +01:00 [6] VERBOSE: Physical machine drives:
02/03/2015 17:06:48 +01:00 [6] VERBOSE: Device ID: \\?\Volume{3dd1183e-abbc-11e4-89a5-806e6f6e6963}\. Mounted device value: fc52b87a0000100000000000. Volume Guid: \\?\Volume{3dd1183e-abbc-11e4-89a5-806e6f6e6963}\. IsBoot: True. IsWindows: False.
02/03/2015 17:06:48 +01:00 [6] VERBOSE: Device ID: C. Mounted device value: fc52b87a0000500600000000. Volume Guid: \\?\Volume{3dd1183f-abbc-11e4-89a5-806e6f6e6963}\. IsBoot: False. IsWindows: True.
02/03/2015 17:06:48 +01:00 [6] VERBOSE: Device ID: D. Mounted device value: fc52b87a000090fc0a000000. Volume Guid: \\?\Volume{3dd11840-abbc-11e4-89a5-806e6f6e6963}\. IsBoot: False. IsWindows: False.
02/03/2015 17:06:48 +01:00 [6] VERBOSE: Device ID: E. Mounted device value: fc52b87a0000903117000000. Volume Guid: \\?\Volume{3dd11841-abbc-11e4-89a5-806e6f6e6963}\. IsBoot: False. IsWindows: False.
02/03/2015 17:06:48 +01:00 [6] VERBOSE: Selected drives:
02/03/2015 17:06:48 +01:00 [6] VERBOSE: Device ID: \\?\Volume{3dd1183e-abbc-11e4-89a5-806e6f6e6963}\. Mounted device value: fc52b87a0000100000000000. Volume Guid: \\?\Volume{3dd1183e-abbc-11e4-89a5-806e6f6e6963}\. IsBoot: True. IsWindows: False.
02/03/2015 17:06:48 +01:00 [6] VERBOSE: Device ID: C. Mounted device value: fc52b87a0000500600000000. Volume Guid: \\?\Volume{3dd1183f-abbc-11e4-89a5-806e6f6e6963}\. IsBoot: False. IsWindows: True.
02/03/2015 17:06:48 +01:00 [6] VERBOSE: Device ID: D. Mounted device value: fc52b87a000090fc0a000000. Volume Guid: \\?\Volume{3dd11840-abbc-11e4-89a5-806e6f6e6963}\. IsBoot: False. IsWindows: False.
02/03/2015 17:06:58 +01:00 [6] VERBOSE: Source machine image deployment file name: 0.1.0x6400000.1.0x6e5951c.0x0.\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy1
02/03/2015 17:06:58 +01:00 [6] VERBOSE: Target file name: C:\Hyper-V\P2V\DC\MVMC\0\3dd1183e-abbc-11e4-89a5-806e6f6e6963.vhd
02/03/2015 17:06:58 +01:00 [6] VERBOSE: Source machine image deployment file name: 0.1.0xaf6400000.0.0x44631e15.0x0.\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy2
02/03/2015 17:06:58 +01:00 [6] VERBOSE: Target file name: C:\Hyper-V\P2V\DC\MVMC\0\C.vhd
02/03/2015 17:06:59 +01:00 [6] VERBOSE: Source machine image deployment file name: 0.1.0xc35000000.0.0x5bb32b0e.0x0.\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy3
02/03/2015 17:06:59 +01:00 [6] VERBOSE: Target file name: C:\Hyper-V\P2V\DC\MVMC\0\D.vhd
02/03/2015 17:13:07 +01:00 [6] EXCEPTION: System.TypeInitializationException: The type initializer for 'Microsoft.Accelerators.Mvmc.Engine.EngineObjectResolver' threw an exception. ---> System.IO.FileNotFoundException: Could not load file or assembly 'System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
at Microsoft.Accelerators.Mvmc.Engine.EngineObjectResolver.Initialize()
at Microsoft.Accelerators.Mvmc.Engine.EngineObjectResolver..cctor()
--- End of inner exception stack trace ---
at Microsoft.Accelerators.Mvmc.Engine.EngineObjectResolver.Resolve[T](ResolverOverride[] parameters)
at Microsoft.Accelerators.Mvmc.Engine.Drive.Virtual.Internal.VirtualHardDiskInternal.OpenImpl(String path, VirtualStorageTypeDevice vhdType, VirtualDiskAccessMask access)
at Microsoft.Accelerators.Mvmc.Engine.Drive.Virtual.VhdVirtualDisk..ctor(String path, FileAccess access)
at Microsoft.Accelerators.Mvmc.Engine.Drive.Virtual.VirtualDiskBase.GetVirtualDisk(String path, FileAccess access)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.PhysicalMachineConversionService.FixupWindowsDrive(String tempDirectory, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.PhysicalMachineConversionService.Fixup(String tempDirectory, IPostProgress fixupDiskPhase, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.PhysicalMachineConversionService.ConvertToMachine(IP2VMachineConversionRequest p2vMachineConversionRequest, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.PhysicalMachineConversionService.<>c__DisplayClass4.<ConvertToMachineAsync>b__3()
at System.Threading.Tasks.Task`1.InvokeFuture(Object futureAsObj)
at System.Threading.Tasks.Task.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
02/03/2015 17:13:07 +01:00 [6] Exception caught : System.TypeInitializationException: The type initializer for 'Microsoft.Accelerators.Mvmc.Engine.EngineObjectResolver' threw an exception. ---> System.IO.FileNotFoundException: Could not load file or assembly 'System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
at Microsoft.Accelerators.Mvmc.Engine.EngineObjectResolver.Initialize()
at Microsoft.Accelerators.Mvmc.Engine.EngineObjectResolver..cctor()
--- End of inner exception stack trace ---
at Microsoft.Accelerators.Mvmc.Gui.Model.ConversionModel.ConvertGuestMachine()
at Microsoft.Accelerators.Mvmc.Gui.ViewModels.Machine.MachineCompletionViewModel.OnWorkerDoWork()
02/03/2015 17:13:07 +01:00 [1] Background task is complete.
02/03/2015 17:13:07 +01:00 [1] Conversion error message is displayed.
02/03/2015 17:13:07 +01:00 [1] Value of 'ErrorMessage' = 'The type initializer for 'Microsoft.Accelerators.Mvmc.Engine.EngineObjectResolver' threw an exception.'

Greetings, I am experiencing same issue. The error log is identical except for the vm name and locations I need help desperately. I have a deadline to meet up with.

Error when converting VMware virtual machine to Azure with new Virtual Machine Converter 2.0

Hello
I'm trying to convert a VMWare virtual machine to Azure with the new Microsoft Virtual Machine Manager 2.0
The process stops when the disk conversion start. Error log below.
Thanks for any advice.
Regards
Toon
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
This conversion will proceed off-line.
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
The uninstallation of tools is not supported in off-line machine conversion scenarios.
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
NOT preparing source virtual machine, this conversion is being treated as off-line.
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
Downloading VMware virtual disks from source virtual machine
04/18/2014 14:53:04 +02:00 [9] VERBOSE:
System.Net.WebException: The remote server returned an error: (404) Not Found.
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.ExportLease.GetFiles(IDownloadAdapter adapter, String host, DirectoryInfo dirInfo, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.VirtualMachine.DownloadFiles(IDownloadAdapter downloadAdapter, String toPath, TaskContext context)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
04/18/2014 14:53:04 +02:00 [9] VERBOSE:
Downloading device (/vm-3213/VirtualLsiLogicController0:0) disk-0.vmdk
04/18/2014 14:53:04 +02:00 [9] EXCEPTION:
System.Net.WebException: The remote server returned an error: (404) Not Found.
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.ExportLease.GetFiles(IDownloadAdapter adapter, String host, DirectoryInfo dirInfo, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.VirtualMachine.DownloadFiles(IDownloadAdapter downloadAdapter, String toPath, TaskContext context)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.<>c__DisplayClass3.<ConvertToDrivesAsync>b__2()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
04/18/2014 14:53:04 +02:00 [9] Exception caught : System.Net.WebException: The remote server returned an error: (404) Not Found.
at Microsoft.Accelerators.Mvmc.Gui.Model.ConversionModel.ConvertGuestMachine()
at Microsoft.Accelerators.Mvmc.Gui.ViewModels.Machine.MachineCompletionViewModel.OnWorkerDoWork()
04/18/2014 14:53:04 +02:00 [1] Background task is complete.
04/18/2014 14:53:04 +02:00 [1] Conversion error message is displayed.
04/18/2014 14:53:04 +02:00 [1] Value of 'ErrorMessage' = 'The remote server returned an error: (404) Not Found.'
04/18/2014 14:53:06 +02:00 [1] Pressing Finish on the 'Completion' page.
04/18/2014 14:53:06 +02:00 [1] UI wizard is closing.
04/18/2014 14:53:06 +02:00 [1] Message box displays : 'Are you sure you want to exit? Any running jobs will be cancelled and the wizard will close.'.
04/18/2014 14:53:09 +02:00 [1] Cancel confirmation prompt was canceled by user.

Hi,
Have you found any solution?
Thanks
Alessandro

RMI and Microsoft Virtual Machine

Hi everyone,
I'm currently tring to find a solution for a migration issue to which I'm confronted.
I have several ActiveX components used in a server context to deliver services to a client.
I intend to migrate the whole to Java soon but there's a huge amount of work to do.
I would like to work on this migration progressively. For now, I would like to make a Java Swing Client running in a JRE 1.4 environment. This client is going to connect to a server running in a Microsoft Virtual Machine environment. The client is going to request some stuff to the server and the server is going to obtain the requested info by queryng an ActiveX component (via JActiveX).
The thing is that I need to do this communication with RMI but I wonder wether RMI is supported in Microsoft's Java Virtual Machine, is it ?
What would you suggest me to do ?
Thanx for any help,
Diego

I think that IBM's AlphaWorks team has programmed an API to make possible to use Applets that use RMI in InternetExplorer4 interpreted by a Microsoft Virtual Machine. But... is this supposed to allow RMI support only in IE4 or in windows in general ?
Diego

ASAP: Serial Versioning and the Microsoft Virtual Machine

Hi,
I'm writing an applet and a server that communicate via sockets using Java's serialization interface. The whole thing works fine unless I use IE (which uses Microsofts virtual machine). In the case I get an InvalidClassException with respect to my serialVersionUID. The error says that there is a versioning problem between a class calles "LHands;" which I'm guessing corresponds to my class called "Hands.class", however hardcoding the version ID in "Hands.class" doesn't fix it. My guess is that the applet is serializing the data using the MVM and the server is using Sun VM and is causing the versioning problem. Has anybody encountered anything like this before? I'm stumped, I've already lost three days on this.
Thanks in advanced,
Paul

in case anyones interested I figured it out. Do not try to serialize an array of objects if your in the the situation I described above. Its a lot of headache. Use Vectors instead

Microsoft Virtual Machine Bus Network Adapter has a yellow !

Hi in my device manager the Microsoft Virtual Machine Bus Network Adapter ? the Microsoft Virtual Machine Bus Network Adapter has a yellow !
Does anyone know how to fix this?

Hi
Firsly try to run Windows updates and see if it can be detected by Windows update and install apprpriate driver ..
Secondly if that did not work try to RIGHT click the Microsoft Virtual Machine Bus Network Adapter and click update driver and choose let Windows look for driver .
Post me your findings
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Microsoft Virtual Machine

I am looking for jave virtual machine and really not for sure where to go for it. I am trying to get into some sites and they are telling me to download java virtual machine but when I go to the web site to do it, windows tells me it's not there anymore. I am using windows xp.
Thanks

I am also looking for jave virtual machine. I am trying to get into some sites and they are telling me to download java virtual machine, but when I go to the web site to do it, windows tells me it's not there anymore. I am using windows xp too. I called microsoft support and they advised that I use google to search for JVM for the company that now offers it. My results didn't post anything clear. I'm asking for help from any reader.
Thanks

Microsoft Virtual Machine & No object for moniker error

Hi all,
I am trying to access java object from my ASP pages that are running on IIS4.0 i currently have only sun's VM .
when i try to access the java object from the ASP , i get a
"No object for moniker error". IIS is not able to find my java classes.
on doing some research i came to the conclusion that i need a microsoft VM in order to talk to my java classes through ASP.I have installed Microsoft Java SDK4.0, but still have no luck. Do i need to install the microsoft VM even after i installed teh SDk?
the other issue is will there be conflicts if i have both Sun' JVM and Microsoft JVM on the same machine.
I will appreciate all solution
thanks in advance
Namrata

Jeez - Found the solution to this. I was having the problem that any Java classes I created and then copied to C:\WINDOWS\java\trustlib were generating the error: "Error Type:(0x800401E5) No object for moniker ". I found that Java classes compiled with the 1.4.x compiler will not work on IIS within an ASP page using the construct: "Set obj = GetObject(java:my_java_class)". When I compiled the exact same code using the javac from 1.3.1 it works! I know of no method of getting Java code that uses methods specific to 1.4.x to work. Luckily the code I was posting to the server doesn't require any of these features. My assumption is that Microsoft is looking at the version of compiler that created the Java class and then throws an error if the compiler is greater than 1.3.x.

FAQ web form throws - Cannot render container ERROR

Hi All,
I used FAQ web form to create a web page. In the FAQ web form i had given link to some document and also some internal links.
After saving the web form and previewing did not throw any eror. But when attached to a role and accessed the page.. getting
this ERROR " Cannot render container : An error occurred while loading the document from the resource content ".
Can somebody tell me the reason for this .??
Regards,
Archana.

Hi Archana,
I have faced the same error like you. The /etc repository is not working. Please check whether the network share used by this repository is available. You can check also SAP Note 1178294 regarding /etc repository in cluster environment. The /etc repository is used by the XML forms. In your case, you used FAQ web form to create web page and the form is built using XML form.
Good luck!!!
Regards,
Faeza
Edited by: norfaeza mat noor on Jul 9, 2009 1:59 AM

Cannot repair disk errors for OSX boot volume using Disk Utility while booted from different disk

I have tried three times to repair my boot volume (OSX 10.6.8 Snow Leopard) permissions using Disk Utility while booted up on a different volume (running Snow Leopard 10.6.4). After hours of Disk Utility reporting that it HAD fixed the problems, an immediate click of "Verify permissions" immediately results in the apparently same continuous stream of permission errors.

Then better luck next time around. Here are some ideas for then:
How to Install Lion Successfully - You must have Snow Leopard 10.6.7 or 10.6.8 Installed
A. Repair the Hard Drive and Permissions:
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.3.) if DW cannot fix the drive, then you will need to reformat the drive and reinstall Snow Leopard.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the backup volume. Source means the internal startup volume.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade to Lion:
Purchase the Lion Installer from the Mac App Store. The download will start quickly. Lion is nearly 4 GBs so a fast internet connection is essential. Download time could run upwards of 4 hours depending upon network conditions and server demands at the time.
Boot From The Lion Installer which is located in your Applications folder.
Follow instructions for installation.

Unable to Install Windows 8 on Virtual Machine

I have Windows 7 Ultimate 64 Bit installed and trying to install Windows 8 64 Bit using the ISO file on Microsoft Virtual Machine, receiving an error as below, tried to attach the screenshot but it is saying "Body text cannot contain images or links
until we are able to verify your account." please help.
-----------Error message starts here------------
Recovery
Your PC needs to be repaired
The 64-bit application couldn't load because your PC doesn't have a 64-bit processor. If you are using Windows To Go, make sure your USB device has a version of Windows that's compatible with the PC you're trying to use.
File:\windows\system32\boot\winload.exe
Error Code: 0xc000035a
You'll need to use recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer.
Press Enter to Try Again
Press F8 for startup settings
-------Error Message ends here---------
I see this screen again when I press enter to try again or press F8
There is nothing wrong with my Windows 8 ISO file, its working absolutely fine,
Please suggest the solution

Hi,
Please know that Windows Virtual PC is unable to host a virtualized install of Windows 8. Windows Virtual PC is being depreciated in favor of Hyper-V.
Kate Li
TechNet Community Support

Windows server 2008 r2 virtual machine uses much less memory then it has assigned

Guys,
I had a virtual machine with windows 2008 r2 operating system, running sharepoint, on a server where it had 6gb RAM memory assigned.
Now I bought a new server, which has 32 gb of ram. I moved my virtual machine there, and assigned 24gb of RAM.
But after I started VM, in Windows Task Manager I see that system uses only about 6.5 GB of RAM assigned. That is not even close to 24gb, which it has available.
Is there any power shell script or anything else available to increase virtual machine memory usage?
Thank you.

Hi,
I found a KB similar described with your issue- the Hyper-V host cannot allocate more memory to the virtual machine because there is not enough free disk space to extend the
memory contents file, more detail symptoms please refer the following KB:
Dynamic Memory allocation in a Virtual Machine does not change although there is available memory on the host
http://support.microsoft.com/kb/2504962/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error: 1238 when creating vm template from a virtual machine

Hi,
I encounter a issue when creating a VM template from a virtual machine whihc is store on hyper host, Can anyone give a suggestion to resolve it.
The virtual machine Windows 2008 R2 20110722 cannot be used in this operation because it is on a perimeter network.
Move virtual machine Windows 2008 R2 20110722 off of the perimeter network or select a virtual machine that is not on a perimeter network, and then try the operation again.
ID: 1238
Many thanks in advance.

vCenter has a different concept of what it means to be a template than SCVMM does.
If you are copying the VHD to the SCVMM Library and building a Template form that, be sure that the OS in the VM is generalized by running sysprep.
Otherwise, your VMs from that template will fail deployment. This is what the SCVMM process of creating a Template from a VM does, it applies sysprep to the VM, then copies it (the VM (VHD + configuration) to the Library, then deletes it.
You can also compose a template using a sysprep prepared VHD that already exists in the Library.
Now, a non-domain joined Hyper-V server is a different thing from a 'perimeter' host. That has to do with how it was added to SCVMM.
http://technet.microsoft.com/en-us/library/gg610646.aspx
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Error while installing XI on virtual machine

Hi All,
My Scenario: I am installing SAP XI on Windows 2K3 server with Ms SQL as DB and Java 1.4.2_12.
                       I am doing this installation on a VMware virtual machine.
My Problem:   I am facing these error:
ERROR 2007-12-18 20:07:54
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-12-18 20:07:54
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Doublestack_OneHost|ind|ind|ind|ind|3|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|11|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Log File content
import_monitor.java.log
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 17, completed 0, failed 0, total 18.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 17, completed 0, failed 1, total 18.
importmonitor.log_
INFO: 2007-12-18 20:06:24
Import Monitor is started.
CONFIG: 2007-12-18 20:06:24
Application options:
dbCodepage=4103
dbType=MSS
extFiles=no
impJobNum=3
importDirs=C:\NW2004s_Dump\51031504\EXP1;C:\NW2004s_Dump\51031504\EXP2;C:\NW2004s_Dump\51031504\EXP3
installDir=C:\Program Files\sapinst_instdir\NW04S\SYSTEM\MSS\CENTRAL\AS
jobNum=3
loadArgs= -loadprocedure fast
monitorTimeout=30
orderBy=size
r3loadExe=E:\usr\sap\AC3\SYS\exe\uc\NTI386\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2007-12-18 20:06:24
List of packages with table structure: 'SAP0000'.
CONFIG: 2007-12-18 20:06:24
List of packages with views: 'SAPVIEW'.
INFO: 2007-12-18 20:06:24
Data codepage 1100 is determined using TOC file 'C:\NW2004s_Dump\51031504\EXP1\DATA\SAPSSEXC.TOC' for package 'SAPSSEXC'.
INFO: 2007-12-18 20:06:27
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'C:\NW2004s_Dump\51031504\EXP3\DATA\SAPSDIC.STR' for package 'SAPSDIC'.
TRACE: 2007-12-18 20:06:27 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is started.
TRACE: 2007-12-18 20:06:27 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSDIC' import package:
E:\usr\sap\AC3\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\NW2004s_Dump\51031504\EXP3\DATA\SAPSDIC.STR DDLMSS.TPL SAPSDIC.TSK MSS -l SAPSDIC.log
TRACE: 2007-12-18 20:06:27 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDIC' import package into database:
E:\usr\sap\AC3\SYS\exe\uc\NTI386\R3load.exe -i SAPSDIC.cmd -dbcodepage 4103 -l SAPSDIC.log -loadprocedure fast
ERROR: 2007-12-18 20:07:46 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is interrupted with exception.
com.sap.inst.lib.io.ProcessExitException: Process 'E:\usr\sap\AC3\SYS\exe\uc\NTI386\R3load.exe -i SAPSDIC.cmd -dbcodepage 4103 -l SAPSDIC.log -loadprocedure fast' exited with return code -1073741819
*     at com.sap.inst.migmon.LoadTask.loadPackage(LoadTask.java:534)*
*     at com.sap.inst.migmon.LoadTask.processPackage(LoadTask.java:257)*
*     at com.sap.inst.migmon.LoadTask.run(LoadTask.java:176)*
*     at java.lang.Thread.run(Thread.java:534)*
*     at com.sap.inst.lib.util.ThreadDispatcher$ThreadWrapper.run(ThreadDispatcher.java:113)*WARNING: 2007-12-18 20:07:54
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2007-12-18 20:07:54
18 error(s) during processing of packages.
INFO: 2007-12-18 20:07:54
Import Monitor is stopped.
I also checked the SAPSDIC.tsk file.
Task entry for only one task had errors:
D TADIR I err.
I also read note 455195 but did not get much help to solve this issue.
Please help me!!
Regards,
Sumit

Did you actually run the installer (Setup.exe) after downloading?

Microsoft Virtual Machine Converter 3.0 throws Cannot Enumerate Disk ERROR

Similar Messages

Maybe you are looking for