Microsoft Visio to SAP ABAP!!!

SDNers,
Im looking for a product/application which will convert all my Microsoft Visio program flow diagrams to ABAP code. Definitely, this will reduce my development time and I will able to focus on other performance aspects & if some code changes which are not possible via this application.
I hope some body can help me.
Regards,
Amey

We got the connection between our CRM abap box & SAP Jam working
Running report RCLB_CUST_CHECK should be run with Jam (not StreamWorks per the guide)
CLB_PLATF we have entries for both service provider type Jam & SteamWork, the service provider is cubetree.com for both. The server url is your Jam url most likely ending in xxxx.sapjam.com

Similar Messages

How to mail a formatted excel(Having complex template from microsoft) file as attachment from presentation server through SAP ABAP

Hello everyone,
I have an requirement to attach an excel file in mail while sending from SAP ABAP. This excel file is a formatted one and its having a proper template which is stored in wwwdata table in sap. My program will pick the file with no changes in format from presentation server i.e. my desktop and will be sent to external email-ids .
I have searched in scn but couldn't get a proper answer which will send the .xls file as attachment with no changes in format of template and data of excel.
Please suggest the approaches how to handle this one.
Regards,
Madhusmita

I have read those two help file and was able to use it in the ABAP proxy code. Thanks.
This is the current outcome. I totally understand that SAP PI communicates via XML. So when PI picks up a file that contains XML tags, the Inbound proxy is triggered. I can see its processing in SM50. However, when I give the Sender FTP adapter a non-XML file to pick up, the Inbound Proxy does not trigger. The file itself should be read into memory so that I can save it to the application server via ABAP code (with no mapping). That is why there is no operation mapping
The reason I am using using FTP to ABAP proxy is because I need to call a subsequent RFC step to process the file. Else, I will just use FTP to File Adapter scenario.
Question 1: I am thinking that that file is the attachment. Is that where I am incorrect and I still need to send in an XML file with the attachment as an addition?
Question 2: Is this the best approach or should I use BPM? If BPM, what steps do I need?

Which module SAP ABAP or SAP PS

Hi
I am Varun Maheshwari. I have done B.E in electrical and Electronics. I had experience of 1.8Yr in Project management as Project assistant in Centre for Wind Energy Technology(on Contract basis). My role was Planning of the project, Site selection- Pan India, Resource & inventory planning for installation purpose, Budgeting the project, Collection of the data and analysis, Report generation as per the analysis to the management and third party. I am willing to pursue career in SAP domain but i am really confuse between SAP domain (SAP PS or SAP ABAP) which will be good if you consider growth & opportunities.
Please guide me considering Market Scenario, Future Growth & Recruitment Opportunities?
I will be highly thankful to you !!
Regards
Varun Maheshwari

Hi Varun,
Since you already have almost 2 years of experience in project management, it is better to capitalize on this experience by choosing a career relevant to your experience. This experience counts when you go forward in the same area (Project management).
In SAP, for project management there are three tools serving different business processes.
1) SAP PS (Project Systems)
2) SAP PPM (Portfolio & Project Management)
3) SAP CPM (Commercial Project Management)
In general it is better to start with SAP PS and then later on with SAP PPM which has very good integration with PS.
Coming to your query on future growth/recruitment opportunities.. There are lot of job opportunities for SAP PS in the market.. Any project in any company in this world requires a tool to monitor & review the project progress. Considering this organisation may use either SAP PS / PPM / Microsoft project / Primavera. But definitely organisations using SAP uses SAP PS for project management. So in short, there is no shortage of demand for SAP PS.
Considering your experience, I have given my opinion and it finally depends on you to choose a career in which you have passion.
Regards,
Ravi

Configure SAP ABAP as service provider using SAML holder-of-key

Hi
We are trying to configure "SAML Holder of key" between Microsoft (as
a service consumer) and SAP ABAP (as service provider).
The service provider/SAP ABAP is release 7.11 and we need to configure this component.
We have found SAP note 1254821 and are trying to follow the instructions for
the "SAML Holder of key" scenario:
However there is one step that we do not understand: step 5 "The private key to decrypt the
encrypted....at the provider system must be a WS Security Identity in transaction TRUST"
Anyone who can elaborate of the meaning of this step and describe a procedure for what
exactly to do?
BR
Tom Bo

Hi,
a service provider needs to check two things when processing message. The first thing is that SAML assertion was issued by STS by checking signature of SAML assertion. The SAML assertion is signed by STS (step 4 in OSS note). The second thing is to verify that sender knows key from SubjectConfirmation element (that's why it is called holder of key). One way is to encrypt and sign SOAP message using symmetric key. There is also option to use asymmetric key. The key is encrypted by STS using the public key of service provider. Therefore the private key must be imported in service provider system (step 5 from OSS note). More info can be found [here|http://help.sap.com/saphelp_nw73/helpdata/en/e5/9f9913fc9c418db98c8693b2bbdb7c/frameset.htm].
Cheers

Reinstallation SAP ABAP Netweaver issue message server not connected

hi ,
i am trying to reinstall SAP ABAP Netweaver but getting error in step 24 of 27. i am getting the following error.
WARNING 2010-07-20 08:52:08.078 iaxxcmsclient.cpp:93
CIaMsgClient::CIaMsgClient(localhost, 3900)
Connect to message server (localhost/3900) failed: NIECONN_REFUSED.
INFO 2010-07-20 08:52:08.078
CJSlibModule::writeInfo_impl()
State of instance NSP/DVEBMGS00 changed from ABAP: UNKNOWN to ABAP: UNKNOWN.
WARNING 2010-07-20 08:52:37.171 iaxxcmsclient.cpp:93
CIaMsgClient::CIaMsgClient(localhost, 3900)
Connect to message server (localhost/3900) failed: NIECONN_REFUSED.
WARNING 2010-07-20 08:53:07.156 iaxxcmsclient.cpp:93
CIaMsgClient::CIaMsgClient(localhost, 3900)
Connect to message server (localhost/3900) failed: NIECONN_REFUSED.
WARNING 2010-07-20 08:53:36.125 iaxxcmsclient.cpp:93
CIaMsgClient::CIaMsgClient(localhost, 3900)
Connect to message server (localhost/3900) failed: NIECONN_REFUSED.
Please do tell me how to resolve this issue.
thanks,
tanmaya

Hi Tanmaya,
Question: How to find whether the port is blocked or not?
(A) You can check the message server port in txn SMMS or dev_ms trace in ST11 to verify if the port is correctly set. If it is and you cannot connect to the message server then you will need to find out which program/service is occupying port 3900. So please follow the steps below:-
(A1) On Unix there is a program called LSOF available which shows ALL programs that occupies all ports. SAP Note [164937|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_cst/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d313634393337%7d] shows were you can get this program.
(A2) On Windows the equilivent of LSOF is Process Explorer from the Sysinternals Suite. This is available on the MS website [here|http://technet.microsoft.com/en-us/sysinternals/bb842062.aspx]. You can use this to filter by port.
So using these programs you will be able to see which programs occupy all ports on your server and either remove or disable them.
P.S. You can use SAP Note [421359|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_cst/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d343231333539%7d] to bind any port to any service on Unix including "protected" ports !!!
Hope this helps
Michael

How to log in to the new installed SAP ABAP instance ?

Dear Experts,
In SAP ERP 2005 installation,
I have done central system installation, Now I need to perform postinstallation steps,
Could you please tell me, how to log in to the new installed SAP ABAP instance and do the post installation?
Regards,
Madhavan K

Hi,
Check the list of post installation steps:
http://www.saptechies.com/post-installation-steps-for-ecc-60/
From my point of view basic post installation steps are:
- Installing SAP License (from http://service.sap.com/licensekeys)
- Setup TMS (STMS)
- Import profiles (RZ10)
- Client Copy (SCC*)
- Create users (SU01)
However further many steps are required as per your requirements. Cehck the link for more detailed steps.
Regards,
Srikishan

SSO from Microsoft wabsite to SAP Portal

Hi
My client wants SSO from .net based Microsoft website to SAP Portals. Requirement is that when customer enters the website e.g. www.mysite.com , he will be automatically gain access (SSO) to SAP Portal .
How it can be done ?
Please help
Thanks in advance

Hi Ananda,
This link answers your query.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/interoperability/dotnet/_web%20services%20and%20a2a%20interoperability%20center/sample%20application%3a%20sso%20with%20a%20.net-based%20web%20service%20client%20using%20sap%20logon%20tickets.pdf
Reward points if handy!
Regards,
Sandeep Tudumu

SAP SSO between Microsoft AD and SAP R/3 GUI&WebGui

Hello Everybody,
We are looking in to implementing SSO between Mircosoft AD and our SAP CRM ABAP 7.0.
We have users both logging in through SAP Gui and also the web gui.
Found there a multiple options for achieving SSO:
1) SNC
2) X.509 cerfificate
3) Kerberos
I would like to go with X.509 certificate , and have already implemented the SAPCRYPTOLIB 5.5.5. Now am trying to download the "SAP NW Single Sign on 2.0" for installing the Secure Login Library SSL. And when i looked at PAM the required product versions are only:
1. SAP EHP1 for SAP NW 7.3
2. SAP NW 7.3
3. SAP NW 7.4
4. SAP NW CE 7.2
So I went back and looked at PAM for SAP NW SINGLE SIGN ON 1.0 required product versions and I only see the below:
1. SAP EHP1 FOR SAP NETWEAVER 7.3
2. SAP NETWEAVER 7.3
3. SAP NETWEAVER CE 7.2
Our version of SAP is CRM ABAP 7.0, so I am not sure how/which version of Single Sign on I have to use.
Can someone please advise.
Thanks!

Thank you Donka for the information!
Looks like NW SSO 2.0 is supported for AIX 7.1 SAP ABAP CRM 7.0.
But we also have users logging in to ABAP CRM 7.0 via HTTP Web dispatcher.
And the PAM does not mention if NWSSO 2.0 is supported for X.509 method for web gui users logging in via HTTP.
Also if we decide to go with SSO 2.0 and I manually Install the COMMONCRYPTOLIB 8 instead of the SAPCRYPTOLIB 5.5.5, I should be able to use the Secure Login Library files that come with the SSO 2.0 right?
Here's our current Kernel version:
kernel make variant 720_REL, 64 BIT AIX, UNICODE , Patch number 500
Thanks!

Error. your computer must be running a supported version of Microsoft Visio and a browser that supports opening files directly from Visio Web Access.

I have the following inside my SharePoint server 2013 :-
EnterPrise Wiki site collection.
i have both "Excel services Application "& "Visio Graphics Service" running correctly.
The problem i am facing is as follow:-
when a user click on an Excel sheet or Visio document , it will be shown inside the browser without any problem.
but if the user click on "Open in Visio" OR "Open in Excel" links inside the browser, they will get the following errors:-
Sorry, but to open this workbook, your computer must be running a supported version of Microsoft Excel and a browser that supports opening files directly from Office Web Apps.
To open this document, your computer must be running a supported version of Microsoft Visio and a browser that supports opening files directly from Visio Web Access.
I have the following settings inside my PC:-
Office 2010 for Excel, word, power point,etc.
Visio 2013.
i have disabled SharePoint foundation support for office 2013
Can anyone advice on this please?

Hi,
Please try to reset the Internet Explorer settings or open Internet Explorer in In-Private browsing and then check if this issue occurs.
If the issue persists, please try to access SharePoint in another computer with Office 2013 and then check if this issue occurs. Or repair Office and restart your server.
Here is a blog about the same issue for you to take a look at:
http://sharepointexit.blogspot.com/2013/12/sorry-but-to-open-this-workbook.html
Best Regards
Dennis Guo
TechNet Community Support

Where do i find daily posted question on sap abap and sap webdynpro abap

Hi
where do we find Daily posted questions on sap abap and sap webdynpro abap in scn sap so that i can go through the questions and answer them .

Hi,
Go to the Content tab of any space and click on discussions. Then you can sort them by date created or any other
For ex: This link for WDA discussions: - Web Dynpro ABAP
You can also click on Receive email notifications for any space to get updates on that space.
hope this helps,
Regards,
Kiran

Is SAP ABAP suitable w.r.t. my qualification and experience ? If NOT, which would be a suitable alternative ?

Hello SAP Cummunity,
I am very much interested in take up SAP course but like everyone very much confused. Firstly let me tell a brief about myself,
- I have graduated in Bachelor of Engineering (Biotechnology)
- After B.E., I took up PGDM (Marketing and Finance).
- As my interest is more inclined towards Marketing, I took up job related to Sales.
- Presently working for FMCG Sector as Sales Executive.
Plz suggest me is SAP ABAP suitable for me ?

Hi Harshith,
There´re many SAP Certifications. You can read Frequently
Asked Questions about SAP Certification, and browse The Training
and Certification Shop Catalog. Find a list of currently valid certifications in the
"By
Role". section.
Best regards,
S.Saleem

How to Extract the data from Microsoft BI to SAP BI 7

Dear All,
We have a requirement to Extract the data from Microsoft BI to Sap BI 7. How can we achieve this??
Shall we use the DB connection for this??
If anyone knows about this please give me some suggestion.
Thanks in advance
Sathiya

Hi All,
How to include the DBMS name when I give the connection. We are using the Data base as MS-BI.
Please guide me
Thanks in advance.
Regards
Sathiya

Error in ABAP Mapping (type SAP-ABAP, kernel error ID UNCAUGHT_EXCEPTION)

Hi ,
Scenario: Manually Purchase Order is created, automatically Sales Order should be created in the Target System through PI,
                   I have used Message Mapping which is working fine for single Customer and Vendor,
                   For Multiple Customers and Vendors i am using one ZTABLE, Only Message Mapping is not sufficient to my requirement.
                  Now i am using both Message Mapping and   ABAP Mapping at a time in Interface Mapping. I created the class and                done the   development., whene i run the scenario i am getting the error as below,
*<SAP:Stack>Error in mapping program ZCL_SD_IDTO_POSO (type SAP-ABAP, kernel error ID UNCAUGHT_EXCEPTION) An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause Dereferencing of the NULL reference</SAP:Stack>*
*<SAP:Retry>M</SAP:Retry>*
*</SAP:Error>*
Please let me know.
Best Regards
Vamsi

Have u seen the ABAP mapping guide?
Refer this series to the ABAP mapping section.https:///people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
It will be very handy and useful.

Problem while fetching more records in SAP ABAP report program

Hello Frinds,
I have SAP ABAP report program which fetches data from usr02 table
Now, program is working fine with less number of records, bot in production there are more than 200000 records and either report gets timed out or there is run time error like buffer area not available.
Below is the fetch statement
SELECT bname FROM usr02 INTO TABLE lt_user
So, do I need to take records in small chunks, I do not think it is needed as I have worked on number of othere databases where there are number of records in single fetch statement and database itself take care of this.
Please provide me some approach to resolve this problem.

This will be very difficult for you.....
Since you are getting a time out error....it looks like, you are runnning this report in foreground....................
Try running it in background it will work...
ELSE....you have to fetch in small chunks....but the question is how will you do it. Since the USR02 only has BNAME as primary key...
Either put the BNAME as part of selection screen and fetch the data.....it will solve your problem....
Only fetch for those BNAME which is entered in the selection screen...
Hope it helps!

Nodes statement in payroll in SAP ABAP hr Report

hi,
i am working in sap abap hr report for payroll.i am using nodes statement in that report.it is showing error that ""PERNR" is not a node of the logical database __S".how can i solve this error.in this report.
NODES pernr .
INFOTYPES: 0000, 0001, 2001.
TABLES: t554s, pcl1, pcl2.
INCLUDE rpclst00.
INCLUDE rpc2rx09.                      "Payroll results datadefns-Intl.
INCLUDE rpc2rxx0.                      "Payroll results datadefns-Intl.
INCLUDE rpc2rgg0.                      "Payroll results datadefns-GB
INCLUDE rpcfdcg0.                      "Payroll results datadefns-GB
INCLUDE rpcdatg0.
INCLUDE rpc2cd00.                      "Cluster Directory defns.
INCLUDE rpc2ps00.                      "Cluster: Generierte Schematas
INCLUDE rpc2pt00.
INCLUDE rpcfdc10.
INCLUDE rpcfdc00.
INCLUDE rpppxd00.
INCLUDE rpppxd10.
INCLUDE rpcfvp09.
INCLUDE rpcfvpg0.
INCLUDE rpppxm00.
TYPES: BEGIN OF t_salrate,
    seqnr    TYPE pc261-seqnr,
    begda    TYPE p2001-begda,
    endda    TYPE p2001-endda,
    split(2) TYPE c,
    val      TYPE p DECIMALS 2,
   END OF t_salrate.
DATA: it_salrate TYPE STANDARD TABLE OF t_salrate INITIAL SIZE 0,
      wa_salrate TYPE t_salrate.
*Selection screen
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: so_awart FOR p2001-awart.
SELECTION-SCREEN END OF BLOCK block1.
*START-OF-SELECTION.
START-OF-SELECTION.
GET pernr.
get payroll results data
rp-init-buffer.
CLEAR rgdir. REFRESH rgdir.
CLEAR rt. REFRESH rt.
CLEAR: rx-key.
set key to current pernr
MOVE pernr-pernr(8) TO cd-key-pernr.
retrieves payroll results for specific pernr(personnel number)
rp-imp-c2-cd.
IF rp-imp-cd-subrc = 0.                                "rgdir success
    rx-key-pernr = pernr-pernr.
    SORT rgdir BY seqnr ASCENDING.
    CLEAR rgdir.
ENDIF.
SORT rgdir BY fpbeg fpend ASCENDING seqnr DESCENDING.
RGDIR the table where all payroll results periods are stored
LOOP AT rgdir WHERE abkrs IN pnpabkrs        "pay area
                  AND srtza EQ 'A'
                  AND void NE 'V'.
    IF sy-subrc NE 0.
    set key to specific payroll results period(current RGDIR loop pass)
      UNPACK rgdir-seqnr   TO   rx-key-seqno.
    Retrieves data for specific payroll results period (current RGDIR
    loop pass)
      rp-imp-c2-rg.
    Loop at wpbp data for specific payroll results period
      LOOP AT wpbp.
        wa_salrate-seqnr = rgdir-seqnr.
        wa_salrate-begda = wpbp-begda.
        wa_salrate-endda = wpbp-endda.
        wa_salrate-split = wpbp-apznr.
      loop at rt data for specific payroll results period
        LOOP AT rt WHERE lgart EQ '/010' AND             "wage type
                         apznr EQ wpbp-apznr.            "payroll split
          wa_salrate-val = ( rt-betpe * ( wpbp-adivi / wpbp-kdivi ) ).
          APPEND wa_salrate TO it_salrate.
        ENDLOOP.
      ENDLOOP.
    Process BT table
      LOOP AT BT.
      ENDLOOP.
    Process NIPAY table
      LOOP AT NIPAY.
      ENDLOOP.
    etc................
    ENDIF.
ENDLOOP.
*END-OF-SELECTION.
END-OF-SELECTION.

Hi,
Have you put a Logical Database in the attributes of the program that you have created ?
Regards,
Samson Rodrigues.

Microsoft Visio to SAP ABAP!!!

Similar Messages

Maybe you are looking for